summaryrefslogtreecommitdiff
path: root/ldso/ldso/powerpc
AgeCommit message (Collapse)Author
2021-06-04powerpc: fix PIE/PIC builds with newer gcc/binutils which use secureplt by ↵Yann Sionneau
default This patch fixes segfault of all user space processes (including init, which caused a panic) on recent buildroot powerpc32 builds. The issue has been reported by Romain Naour in this thread: https://mailman.uclibc-ng.org/pipermail/devel/2021-May/002068.html Recent buildroot toolchain enables secure PLT in powerpc gcc. The latter will then supply -msecure-plt to gas invocations by default. Recent buildroot also enables PIE by defaults. For the secure PLT to work in PIC, the r30 register needs to point to the GOT. Old "bss plt" was just a one-instruction-wide PLT slot, pointed-to by a R_PPC_JMP_SLOT relocation, which was written on-the-fly to contain a branch instruction to the correct address. It therefore had to stay writable. New secure PLT only contains read-only code which loads the branch address from the writable GOT. Note: secure PLT without PIC does not need r30 to be set. Because offset between plt stub code and got is known at link-time. In this case the PLT entry looks like: 1009b3e0 <__uClibc_main@plt>: 1009b3e0: 3d 60 10 0e lis r11,4110 1009b3e4: 81 6b 03 74 lwz r11,884(r11) 1009b3e8: 7d 69 03 a6 mtctr r11 1009b3ec: 4e 80 04 20 bctr Whereas secure PLT with PIC - offset between plt and got is unknown at link-time - looks like this: 000af800 <00000000.plt_pic32.__uClibc_main>: af800: 81 7e 03 80 lwz r11,896(r30) af804: 7d 69 03 a6 mtctr r11 af808: 4e 80 04 20 bctr af80c: 60 00 00 00 nop Signed-off-by: Yann Sionneau <yann@sionneau.net>
2017-01-14ldso: do not resolve relocations for debug, dig them up when debuggingWaldemar Brodkorb
Signed-off-by: Waldemar Brodkorb <wbx@openadk.org>
2012-06-15ppc/elfinterp.c: fix comment typosPeter S. Mazinger
Signed-off-by: Peter S. Mazinger <ps.m@gmx.net> Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
2012-03-29ldso: mark _start hiddenMike Frysinger
There's no need to export this symbol, so mark them all hidden. Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2012-03-25ldso: use ELF_xxx()/ElfW() helpersMike Frysinger
They expand into the same code, but using the ELF_xxx()/ElfW() macros makes it much easier to spot similarities between code bases. Acked-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com> Acked-by: Carmelo Amoroso <carmelo.amoroso@st.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-10-14ldso: silence harmless warning for !LDSO_PRELINK_SUPPORTBernhard Reutner-Fischer
Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
2011-10-06ldso: merge duplicate dl-syscalls.h code to common headerMike Frysinger
Signed-off-by: Mike Frysinger <vapier@gentoo.org> Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
2011-10-01ldso: constify reloc array itselfMike Frysinger
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-01-21Merge remote branch 'origin/master' into prelinkCarmelo Amoroso
* origin/master: bump version to 0.9.32-rc2-git release 0.9.32-rc2 nptl: Fix __USER_LABEL_PREFIX__ concatenatio nptl: fix start_thread() for _STACK_GROWS_UP ldso: get rid of _dl_lookup_hash Add protected symbols support for all architectures Revert "ldso/arm: Correct protected symbol resolution" Revert "ldso_sh: add support for protected symbols to SH" Revert "ldso/i386: support protected symbols" cris: Fix build issues syslog: fix 'everyone logs with user facility' __psfs_parse_spec: always use long int for %p buildsys: headers target should not depend on sysnum.h buildsys: fix make release target nptl: get rid of the last preprocessor warning when __ASSUME_TGKILL is not defined remove uClibc_ctype.h if !LOCALE Revert "Makefile.in: Add header to 'all' target" nptl: get rid of preprocessor warning when __ASSUME_TGKILL is not defined Conflicts: ldso/include/dl-hash.h ldso/ldso/arm/elfinterp.c ldso/ldso/avr32/elfinterp.c ldso/ldso/bfin/elfinterp.c ldso/ldso/cris/elfinterp.c ldso/ldso/dl-hash.c ldso/ldso/i386/elfinterp.c ldso/ldso/m68k/elfinterp.c ldso/ldso/mips/elfinterp.c ldso/ldso/powerpc/elfinterp.c ldso/ldso/sh/elfinterp.c ldso/ldso/sh64/elfinterp.c ldso/ldso/sparc/elfinterp.c ldso/ldso/x86_64/elfinterp.c ldso/ldso/xtensa/elfinterp.c ldso/libdl/libdl.c Signed-off-by: Carmelo Amoroso <carmelo.amoroso@st.com>
2011-01-20Add protected symbols support for all architecturesSalvatore Cro
Protected symbols are global symbols for which interposition is not allowed. We manage them in generic _dl_lookup_hash function. To handle protected symbols we need to get a reference to the module that defines the symbol itself. So we pass a new parameter 'struct symbol_ref' to the __dl_lookup_hash that is defined as below: struct symbol_ref { const ElfW(Sym) *sym; struct elf_resolve *tpnt; }; The tpnt field is used as an ouput parameter and refers to the module which defines the protected symbol. Further it can be used as output parameter for TLS relocations and FDPIC case. The sym field is instead used as an input parameter to detect the visibility of the symbol we are looking-up. In this way we get rid of different signatures for _dl_lookup_hash, allowing to remove the _dl_find_hash wrapper. This new structure is also suitable for prelink integration. Signed-off-by: Salvatore Cro <salvatore.cro@st.com> Signed-off-by: Carmelo Amoroso <carmelo.amoroso@st.com>
2010-10-11ldso: Extend prelink support for all other achitecturesFilippo Arcidiacono
Update Arch specific part of the dynamic linker to the latest cahnges required by prelink: - Use _dl_loaded_modules->scope as global symbol scope - Pass the sym argument (or NULL) to the _dl_find_hash - Update _dl_parse, _dl_do_reloc, _dl_do_lazy_reloc and _dl_parse_relocation_information to reflect the change of the scope argument's type - Add the call to _dl_debug_lookup used for trace prelinking. Signed-off-by: Filippo Arcidiacono <filippo.arcidiacono@st.com> Signed-off-by: Carmelo Amoroso <carmelo.amoroso@st.com>
2010-05-09powerpc: Add TLS and NPTL supportKhem Raj
Signed-off-by: Khem Raj <raj.khem@gmail.com> Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
2009-11-15ldso: Add missing newlines to some debug messagesBernhard Reutner-Fischer
Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
2009-10-14ldso: fixup all the rest of the calls to _dl_find_hashAustin Foxley
With TLS _dl_find_hash grew an extra param. These archs don't have TLS reloc support yet, but they do need to compile without it. Signed-off-by: Austin Foxley <austinf@cetoncorp.com>
2009-03-05Use __always_inline instead of __inline__Carmelo Amoroso
2009-01-28Remove check for the relocation type check in the resolver,Carmelo Amoroso
from all archs. Signed-off-by: Jiri Olsa <olsajiri@gmail.com>
2009-01-04ldso/ldso/dl-startup.c: make _dl_elf_main static; remove one dead variable.Denis Vlasenko
ldso/ldso/avr32/dl-startup.h: remove superfluous definition of START() macro. ldso/ldso/*/dl-startup.h: fix a typo in comment text data bss dec hex filename - 16752 244 92 17088 42c0 lib/ld-uClibc.so + 16709 240 92 17041 4291 lib/ld-uClibc.so
2008-12-03- Use runtime pagesize (Jeremy Kerr)Bernhard Reutner-Fischer
Some powerpc machines can support 64k pages, enabled by the CONFIG_64K_PAGES option in linux. However, the uClibc dynamic loader won't currently work on these machines, as it uses hard-coded values (PAGE_ALIGN, ADDR_ALIGN and OFFS_ALIGN) in the ldso architecture-specific headers. When running on a kernel with 64k pages, ld.so tries to mmap with 4k-aligned addresses, rather than 64k, so mmap fails with -EINVAL. When booting a 64k machine with a uClibc dynamic linker, init fails with: /init:500: can't map '/lib/libc.so.0' /init:500: can't map '/lib/libc.so.0' /init:500: can't map '/lib/libc.so.0' /init: can't load library 'libc.so.0' Kernel panic - not syncing: Attempted to kill init! This change allows ld.so determine these alignment masks at runtime, rather than compile-time. Since we have the _dl_pagesize variable available, we can use that to generate the appropriate masks. Since almost all of the architectures can use the common definitions for the _ALIGN macros, we can consolidate them all in ldso.h, and override in the sysdep headers where necessary (ie, mips). This allows me to start a uClibc-based root fs on a 64k machine. Signed-off-by: Jeremy Kerr <jk at ozlabs org>
2008-10-03- use c89-style commentsBernhard Reutner-Fischer
Closes issue #5194
2008-09-15- commentary typo fixBernhard Reutner-Fischer
2008-07-23- trim any trailing whitespaceBernhard Reutner-Fischer
2008-07-23- fix inline keywordBernhard Reutner-Fischer
2008-07-23- fix asm and volatile keywordsBernhard Reutner-Fischer
2008-04-24- fixup asm. No object-code changesBernhard Reutner-Fischer
2007-06-04Correct return value. Pointed out by psm.Joakim Tjernlund
2007-01-05Support SecurePLTs for PowerPC. You need a toolchain that supportsJoakim Tjernlund
config option --enable-secureplt. The assembler must also supports R_PPC_REL16* relocations. gcc 4.1.1 and binutils 2.17 is known to do this.
2006-06-19eat extraneous ; and insert some whitespace where it belongsMike Frysinger
2006-03-08macro out the /10 operation so arches can have their own versions ... and ↵Mike Frysinger
create some default macros for do_rem/do_div_10 so we dont duplicate the samething in many arch header files
2006-01-19move a bunch of arch-specific checks out of common files and into an arch ↵Mike Frysinger
specific header file to make porting/updates a lot easier
2006-01-17since just about everyone uses return _dl_elf_main for START() now, make it ↵Mike Frysinger
the default
2005-12-15Fix static apps on linux 2.6. Linux clobbers r7 in 2.6, soJoakim Tjernlund
use r3 instead to pass _dl_fini.
2005-11-21Partly undo earlier patch on vapier's requestPeter S. Mazinger
2005-11-21Guard debug_sym/debug_reloc, make sure elfinterp.c sees __SUPPORT_LD_DEBUG__Peter S. Mazinger
2005-10-29Hopefully fix the bug Oleg reported in ↵Joakim Tjernlund
http://uclibc.org/lists/uclibc/2005-October/012809.html This will only fix powerpc. Should be easy to fix the other arches.
2005-09-20forgot MMAP_HAS_6_ARGSJoakim Tjernlund
2005-09-20Make powerpc use sys/syscall.h, instead of defining its own syscalls.Joakim Tjernlund
2005-08-15move arch-specific checks out of shared dl-syscall.h and into arch-specific ↵Mike Frysinger
dl-syscalls.h
2005-07-07rip out all the duplicated debug code and move into a shared fileMike Frysinger
2005-04-03Prepare PowerPC some more for standalone exection of ldso.Joakim Tjernlund
Note that every arch that wants to support standalone execution needs to align its stack pointer in crtX since ldso will adjust the stack pointer when adjusting argc and argv in standalone mode.
2005-03-29Moved the addition of load address from the fast pathJoakim Tjernlund
where possible. This will also make ldso smaller. However the patch touches all archs and I have only tested PPC and x86.
2005-03-21Prepare for moving ldso FINI handling to libc by passing _dl_fini. This ↵Joakim Tjernlund
should not break ABI. Minor cleanup as well.
2005-03-17General arch cleanup and prepare support for standaloneJoakim Tjernlund
execution of ldso. Added new asm for MIPS to be tested. All arches should retest.
2005-03-14Generalize optimized relative reloc procesing.Joakim Tjernlund
Add elf_machine_dynamic() and elf_machine_load_address() for all archs. elf_machine_dynamic() replaces the #ifdef mess to get at the GOT. elf_machine_load_address() is needed to execute ldso directly, this is not complete yet. I probably broke one or two archs(only tested PPC) so please try and report problems. For a report to be useful you need to enable __SUPPORT_LD_DEBUG_EARLY__ and __SUPPORT_LD_DEBUG__
2005-03-10Use DT_RELCONT_IDX to optimize the relocation of R_PPC_RELATIVEJoakim Tjernlund
relocs. All RELA arches can probably copy this. REL archs will have to delete the "+ rpnt->r_addend" from the loop.
2004-11-10Add RTLD_LOCAL support for dlopened libs. Reported byJoakim Tjernlund
Andrew de Quincey, who has been most helpful getting this sorted out, thanks. Thanks also to Peter Mazinger who did alot of testing. Removed all traces of dl_parse_copy_information() since it is no longer used.
2004-10-07Remove usage of _dl_parse_copy_information() from generic code.Joakim Tjernlund
Remove definition of _dl_parse_copy_information() for powerpc. Remaining archs can do the same. Make debugging output of "relocation processing: xxx" a bit more sane.
2004-09-23Make do_rem() safe. From Peter Kjellerstedt.Joakim Tjernlund
2004-09-23Make powerpc look more like the other archs.Joakim Tjernlund
2004-09-17Bugfix: Add r_addend to final address. The r_addend is mostly zeroJoakim Tjernlund
but can be nonzero for JMP relocs as well. All Rela arches need to do this, test and send a patch :) Remove unneeded test in R_PPC_COPY.
2004-09-16Don't allow undefined global symbols to pass(all archs needs fixing).Joakim Tjernlund
If you are using buildroot and soft floating point, you may have to rebuild the libm.so library, copy it to staging_dir/lib and rebuild your application. Cleanups as well.
generated by cgit v1.2.3 (git 2.25.1) at 2024-05-03 16:07:26 +0000