summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
-rw-r--r--include/stdio.h53
-rw-r--r--libc/misc/internals/dtostr.c26
-rw-r--r--libc/stdio/Makefile6
-rw-r--r--libc/stdio/printf.c57
-rw-r--r--libc/stdio/scanf.c12
-rw-r--r--libc/stdio/stdio.c926
6 files changed, 587 insertions, 493 deletions
diff --git a/include/stdio.h b/include/stdio.h
index d98adea15..f8bdfa12b 100644
--- a/include/stdio.h
+++ b/include/stdio.h
@@ -35,17 +35,17 @@ __BEGIN_DECLS
struct __stdio_file {
unsigned char *bufpos; /* the next byte to write to or read from */
unsigned char *bufread; /* the end of data returned by last read() */
- unsigned char *bufwrite; /* highest address writable by macro */
+ unsigned char *bufwrite; /* 1 + highest address writable by macro */
unsigned char *bufstart; /* the start of the buffer */
unsigned char *bufend; /* the end of the buffer; ie the byte after the last
malloc()ed byte */
+ struct __stdio_file * next;
int fd; /* the file descriptor associated with the stream */
- int mode;
-
- struct __stdio_file * next;
- char unbuf[8]; /* The buffer for 'unbuffered' streams */
+ unsigned char mode;
+ unsigned char ungot;
+ char unbuf[2]; /* The buffer for 'unbuffered' streams */
};
typedef struct __stdio_file FILE;
@@ -65,17 +65,13 @@ typedef struct __stdio_file FILE;
#define _IONBF 2 /* No buffering. */
/* Possible states for a file stream -- internal use only */
-#define __MODE_BUF 0x03 /* Modal buffering dependent on isatty */
-#define __MODE_FREEBUF 0x04 /* Buffer allocated with malloc, can free */
-#define __MODE_FREEFIL 0x08 /* FILE allocated with malloc, can free */
-#define __MODE_READ 0x10 /* Opened in read only */
-#define __MODE_WRITE 0x20 /* Opened in write only */
-#define __MODE_RDWR 0x30 /* Opened in read/write */
-#define __MODE_READING 0x40 /* Buffer has pending read data */
-#define __MODE_WRITING 0x80 /* Buffer has pending write data */
-#define __MODE_EOF 0x100 /* EOF status */
-#define __MODE_ERR 0x200 /* Error status */
-#define __MODE_UNGOT 0x400 /* Buffer has been polluted by ungetc */
+#define __MODE_BUF 0x03 /* Modal buffering dependent on isatty */
+#define __MODE_FREEBUF 0x04 /* Buffer allocated by stdio code, can free */
+#define __MODE_FREEFIL 0x08 /* FILE allocated by stdio code, can free */
+#define __MODE_UNGOT 0x10 /* Buffer has been polluted by ungetc */
+#define __MODE_TIED 0x20 /* FILE is tied with stdin/stdout */
+#define __MODE_EOF 0x40 /* EOF status */
+#define __MODE_ERR 0x80 /* Error status */
/* The possibilities for the third argument to `fseek'.
These values should not be changed. */
@@ -157,7 +153,26 @@ extern FILE *fopen __P ((__const char *__restrict __filename,
extern FILE *freopen __P ((__const char *__restrict __filename,
__const char *__restrict __mode,
FILE *__restrict __stream));
-#define freopen(__file, __mode, __fp) __fopen((__file), -1, (__fp), (__mode))
+
+#ifdef __USE_MISC
+/*
+ * Open a file using an automatically (stack) or statically allocated FILE.
+ * The FILE * returned behaves just as any other FILE * with respect to the
+ * stdio functions, but be aware of the following:
+ * NOTE: The buffer used for the file is FILE's builtin 2-byte buffer, so
+ * setting a new buffer is probably advisable.
+ * NOTE: This function is primarily intended to be used for stack-allocated
+ * FILEs when uClibc stdio has been built with no dynamic memory support.
+ * For the statically allocated case, it is probably better to increase
+ * the value of FIXED_STREAMS in stdio.c.
+ * WARNING: If allocated on the stack, make sure you call fclose before the
+ * stack memory is reclaimed!
+ */
+extern FILE *fsfopen __P ((__const char *__restrict __filename,
+ __const char *__restrict __mode,
+ FILE *__restrict __stream));
+#endif
+
#ifdef __USE_LARGEFILE64
extern FILE *fopen64 __P ((__const char *__restrict __filename,
@@ -390,8 +405,8 @@ extern int ferror __P ((FILE *__stream));
/* Macro versions of the 3 previous functions */
/* If fp is NULL... */
#define clearerr(fp) ((fp)->mode &= ~(__MODE_EOF|__MODE_ERR), (void)0)
-#define feof(fp) (((fp)->mode&__MODE_EOF) != 0)
-#define ferror(fp) (((fp)->mode&__MODE_ERR) != 0)
+#define feof(fp) ((fp)->mode&__MODE_EOF)
+#define ferror(fp) ((fp)->mode&__MODE_ERR)
/* Print a message describing the meaning of the value of errno. */
extern void perror __P ((__const char *__s));
diff --git a/libc/misc/internals/dtostr.c b/libc/misc/internals/dtostr.c
index 498887fb3..85ec69b12 100644
--- a/libc/misc/internals/dtostr.c
+++ b/libc/misc/internals/dtostr.c
@@ -1,7 +1,7 @@
/*
* Copyright (C) 2000, 2001 Manuel Novoa III
*
- * Function: int __dtostr(FILE * fp, size_t size, double x,
+ * Function: int __dtostr(FILE * fp, size_t size, long double x,
* char flag[], int width, int preci, char mode)
*
* This was written for uClibc to provide floating point support for
@@ -32,17 +32,18 @@
/*
* Configuration for the scaling power table. Ignoring denormals, you
- * should have 2**EXP_TABLE_SIZE >= MAX_DBL_EXP >= 2**(EXP_TABLE_SIZE-1).
+ * should have 2**EXP_TABLE_SIZE >= LDBL_MAX_EXP >= 2**(EXP_TABLE_SIZE-1).
* The minimum for standard C is 6. For IEEE 8bit doubles, 9 suffices.
+ * For long doubles on i386, use 13.
*/
-#define EXP_TABLE_SIZE 9
+#define EXP_TABLE_SIZE 13
/*
* Set this to the maximum number of digits you want converted.
* Conversion is done in blocks of DIGITS_PER_BLOCK (9 by default) digits.
- * 17 digits suffices to uniquely determine a double on i386.
+ * (20) 17 digits suffices to uniquely determine a (long) double on i386.
*/
-#define MAX_DIGITS 17
+#define MAX_DIGITS 20
/*
* Set this to the smallest integer type capable of storing a pointer.
@@ -56,11 +57,7 @@
* caused by the FPU that strtod had. If it causes problems, call the function
* and compile zoicheck.c with -ffloat-store.
*/
-#if 1
#define _zero_or_inf_check(x) ( x == (x/4) )
-#else
-extern int _zero_or_inf_check(double x);
-#endif
/*
* Fairly portable nan check. Bitwise for i386 generated larger code.
@@ -103,10 +100,9 @@ enum {
/*
* Only bother checking if this is too small.
- * Throw in some play for denormals ( roughly O(-324) vs O(-307) on i386 ).
*/
-#if (3+DBL_DIG-DBL_MIN_10_EXP)/2 > EXP_TABLE_MAX
+#if LDBL_MAX_10_EXP/2 > EXP_TABLE_MAX
#error larger EXP_TABLE_SIZE needed
#endif
@@ -147,11 +143,11 @@ static const char *fmts[] = {
/*****************************************************************************/
-int __dtostr(FILE * fp, size_t size, double x,
+int __dtostr(FILE * fp, size_t size, long double x,
char flag[], int width, int preci, char mode)
{
- double exp_table[EXP_TABLE_SIZE];
- double p10;
+ long double exp_table[EXP_TABLE_SIZE];
+ long double p10;
DIGIT_BLOCK_TYPE digit_block; /* int of at least 32 bits */
int i, j;
int round, o_exp;
@@ -290,7 +286,7 @@ int __dtostr(FILE * fp, size_t size, double x,
}
*++e = 0; /* ending nul char */
- if ((mode == 'g') && ((o_exp >= -4) && (o_exp < round))) {
+ if ((mode == 'g') && ((o_exp >= -4) && (o_exp <= round))) {
mode = 'f';
}
diff --git a/libc/stdio/Makefile b/libc/stdio/Makefile
index 3c0103e52..c7fb2e44c 100644
--- a/libc/stdio/Makefile
+++ b/libc/stdio/Makefile
@@ -36,13 +36,13 @@ endif
MSRC=stdio.c
MOBJ=_stdio_init.o \
- _alloc_stdio_buffer.o _free_stdio_buffer.o _free_stdio_stream.o \
+ _alloc_stdio_buffer.o _free_stdio_buffer_of_file.o _free_stdio_stream.o \
clearerr.o feof.o ferror.o fileno.o \
setbuffer.o setvbuf.o setbuf.o setlinebuf.o \
- fclose.o _fopen.o fopen.o freopen.o fdopen.o fflush.o \
+ fclose.o _fopen.o fopen.o freopen.o fdopen.o fflush.o fsfopen.o \
fseek.o rewind.o ftell.o fgetpos.o fsetpos.o \
fputc.o fgetc.o fgets.o gets.o fputs.o puts.o ungetc.o \
- fread.o fwrite.o getchar.o putchar.o
+ fread.o fwrite.o getchar.o putchar.o _uClibc_fwrite.o _uClibc_fread.o
MSRC2=printf.c
MOBJ2=printf.o sprintf.o fprintf.o vprintf.o vsprintf.o vfprintf.o snprintf.o \
diff --git a/libc/stdio/printf.c b/libc/stdio/printf.c
index f6ca8dda4..06cf6a5b2 100644
--- a/libc/stdio/printf.c
+++ b/libc/stdio/printf.c
@@ -267,7 +267,7 @@ int vsnprintf(char *sp, size_t size, __const char *fmt, va_list ap)
*/
f.bufwrite = (char *) ((unsigned) -1);
f.bufpos = sp;
- f.mode = _IOFBF | __MODE_WRITE;
+ f.mode = _IOFBF;
rv = vfnprintf(&f, size, fmt, ap);
if (size) { /* If this is going to a buffer, */
@@ -283,25 +283,17 @@ int vsnprintf(char *sp, size_t size, __const char *fmt, va_list ap)
*/
extern int vdprintf(int fd, const char *fmt, va_list ap)
{
-#if 0
- FILE f = {f.unbuf, f.unbuf, f.unbuf, f.unbuf, f.unbuf + sizeof(f.unbuf),
- fd, _IONBF | __MODE_WRITE};
-
- assert(fd >= 0); /* fd==0 may no longer be stdin */
-
- return vfnprintf(&f, -1, fmt, ap);
-#else
char buf[BUFSIZ];
- FILE f = {buf, buf, buf, buf, buf + sizeof(buf),
- fd, _IOFBF | __MODE_WRITE};
+ FILE f = {buf, 0, buf+sizeof(buf), buf, buf+sizeof(buf), 0, fd, _IOFBF};
int rv;
- assert(fd >= 0); /* fd==0 may no longer be stdin */
-
rv = vfnprintf(&f, -1, fmt, ap);
- fflush(&f);
+
+ if (fflush(&f)) {
+ return -1;
+ }
+
return rv;
-#endif
}
#endif
@@ -311,7 +303,7 @@ extern char *__ultostr(char *buf, unsigned long uval, int base, int uppercase);
extern char *__ltostr(char *buf, long val, int base, int uppercase);
extern char *__ulltostr(char *buf, unsigned long long uval, int base, int uppercase);
extern char *__lltostr(char *buf, long long val, int base, int uppercase);
-extern int __dtostr(FILE * fp, size_t size, double x,
+extern int __dtostr(FILE * fp, size_t size, long double x,
char flag[], int width, int preci, char mode);
enum {
@@ -353,7 +345,7 @@ static const char u_radix[] = "\x02\x08\x10\x10\x10\x0a";
int vfnprintf(FILE * op, size_t max_size, const char *fmt, va_list ap)
{
- int i, cnt = 0, lval;
+ int i, cnt, lval;
char *p;
const char *fmt0;
int buffer_mode;
@@ -367,7 +359,9 @@ int vfnprintf(FILE * op, size_t max_size, const char *fmt, va_list ap)
#endif
char flag[sizeof(spec)];
- /* This speeds things up a bit for unbuffered */
+ cnt = 0;
+
+ /* This speeds things up a bit for line unbuffered */
buffer_mode = (op->mode & __MODE_BUF);
op->mode &= (~__MODE_BUF);
@@ -375,9 +369,6 @@ int vfnprintf(FILE * op, size_t max_size, const char *fmt, va_list ap)
if (*fmt == '%') {
fmt0 = fmt; /* save our position in case of bad format */
++fmt;
- if (buffer_mode == _IONBF) {
- fflush(op);
- }
width = -1; /* min field width */
preci = -5; /* max string width or mininum digits */
radix = 10; /* number base */
@@ -511,7 +502,7 @@ int vfnprintf(FILE * op, size_t max_size, const char *fmt, va_list ap)
if (flag[FLAG_HASH] && (*p != '0')) { /* non-zero */
if (radix == 8) {
*--p = '0'; /* add leadding zero */
- } else { /* either 2 or 16 */
+ } else if (radix != 10) { /* either 2 or 16 */
flag[FLAG_PLUS] = '0';
*--p = 'b';
if (radix == 16) {
@@ -556,6 +547,9 @@ int vfnprintf(FILE * op, size_t max_size, const char *fmt, va_list ap)
*p = va_arg(ap, int);
} else { /* string */
p = va_arg(ap, char *);
+ if (!p) {
+ p = "(null)";
+ }
}
#if WANT_DOUBLE || WANT_DOUBLE_ERROR
} else if (p-u_spec < 27) { /* floating point */
@@ -564,11 +558,15 @@ int vfnprintf(FILE * op, size_t max_size, const char *fmt, va_list ap)
if (preci < 0) {
preci = 6;
}
- cnt += __dtostr(op, max_size, va_arg(ap, double),
+ cnt += __dtostr(op, max_size,
+ (long double) ((lval > 1)
+ ? va_arg(ap, long double)
+ : va_arg(ap, double)),
flag, width, preci, *fmt);
goto nextfmt;
#elif WANT_DOUBLE_ERROR
- (void) va_arg(ap,double); /* carry on */
+ (void) ((lval > 1) ? va_arg(ap, long double)
+ : va_arg(ap, double)); /* carry on */
p = (char *) dbl_err;
#endif /* WANT_DOUBLE */
}
@@ -604,7 +602,11 @@ int vfnprintf(FILE * op, size_t max_size, const char *fmt, va_list ap)
|| (*fmt == 'm')
#endif
) {
- len = preci;
+ if (len > preci) {
+ len = preci;
+ } else {
+ preci = len;
+ }
}
preci -= len;
if (preci < 0) {
@@ -678,11 +680,8 @@ int vfnprintf(FILE * op, size_t max_size, const char *fmt, va_list ap)
}
op->mode |= buffer_mode;
- if (buffer_mode == _IONBF) {
- fflush(op);
- }
if (buffer_mode == _IOLBF) {
- op->bufwrite = op->bufstart;
+ op->bufwrite = op->bufpos;
}
if (ferror(op)) {
diff --git a/libc/stdio/scanf.c b/libc/stdio/scanf.c
index 2962125b4..5ed7f8366 100644
--- a/libc/stdio/scanf.c
+++ b/libc/stdio/scanf.c
@@ -35,15 +35,15 @@ va_dcl
#endif
{
FILE string[1] = {
- {0, (char *) (unsigned) -1, 0, 0, (char *) (unsigned) -1, -1,
- _IOFBF | __MODE_READ}
+ {0, (unsigned char *) ((unsigned) -1), 0, 0, (char *) ((unsigned) -1),
+ 0, -1, _IOFBF}
};
va_list ptr;
int rv;
- va_start(ptr, fmt);
string->bufpos = (unsigned char *) ((void *) sp);
+ va_start(ptr, fmt);
rv = vfscanf(string, fmt, ptr);
va_end(ptr);
return rv;
@@ -83,11 +83,11 @@ va_list ap;
int vsscanf(__const char *sp, __const char *fmt, va_list ap)
{
FILE string[1] = {
- {0, (char *) (unsigned) -1, 0, 0, (char *) (unsigned) -1, -1,
- _IOFBF | __MODE_READ}
+ {0, (unsigned char *) ((unsigned) -1), 0, 0, (char *) ((unsigned) -1),
+ 0, -1, _IOFBF}
};
- string->bufpos = (unsigned char *) ((void *) sp);
+ string->bufpos = (unsigned char *) sp;
return vfscanf(string, fmt, ap);
}
#endif
diff --git a/libc/stdio/stdio.c b/libc/stdio/stdio.c
index 7ed545742..0522c1b5d 100644
--- a/libc/stdio/stdio.c
+++ b/libc/stdio/stdio.c
@@ -16,6 +16,26 @@
* buffer for the unbuffered stderr!
*/
+/*
+ * Feb 27, 2001 Manuel Novoa III
+ *
+ * Most of the core functionality has been completely rewritten.
+ * A number of functions have been added as well, as mandated by C89.
+ *
+ * An extension function "fsfopen" has been added:
+ * Open a file using an automatically (stack) or statically allocated FILE.
+ * The FILE * returned behaves just as any other FILE * with respect to the
+ * stdio functions, but be aware of the following:
+ * NOTE: The buffer used for the file is FILE's builtin 2-byte buffer, so
+ * setting a new buffer is probably advisable.
+ * NOTE: This function is primarily intended to be used for stack-allocated
+ * FILEs when uClibc stdio has no dynamic memory support.
+ * For the statically allocated case, it is probably better to increase
+ * the value of FIXED_STREAMS in stdio.c.
+ * WARNING: If allocated on the stack, make sure you call fclose before the
+ * stack memory is reclaimed!
+ */
+
#include <stdlib.h>
#include <stdio.h>
@@ -26,55 +46,105 @@
#include <errno.h>
#include <string.h>
#include <assert.h>
+#include <limits.h>
+
+extern off_t _uClibc_fwrite(const unsigned char *buf, off_t bytes, FILE *fp);
+extern off_t _uClibc_fread(unsigned char *buf, off_t bytes, FILE *fp);
+
+/* Note: This def of READING is ok since 1st ungetc puts in buf. */
+#if 0
+#define READING(fp) (fp->bufpos < fp->bufread)
+#else
+#define READING(fp) (fp->bufstart < fp->bufread)
+#endif
+#if 1
+#define WRITING(fp) (fp->bufwrite > fp->bufstart)
+#else
+#define WRITING(fp) ((fp->bufpos > fp->bufread) && (fp->bufpos > fp->bufstart))
+#endif
+
+#define READABLE(fp) (fp->bufread != 0)
+#define WRITEABLE(fp) (fp->bufwrite != 0)
+#define EOF_OR_ERROR(fp) (fp->mode & (__MODE_EOF | __MODE_ERR))
+
+/***********************************************************************/
+/* BUILD TIME OPTIONS */
+/***********************************************************************/
+/*
+ * FIXED_STREAMS must be >= 3 and FIXED_BUFFERS must be >= 2.
+ * As a feature, these can be increased, although this is probably
+ * only useful if DISABLE_DYNAMIC is set to 1 below.
+ */
#define FIXED_STREAMS 3
#define FIXED_BUFFERS 2
-struct fixed_buffer {
- unsigned char data[BUFSIZ];
- unsigned char used;
-};
+/*
+ * As a feature, you can build uClibc with no dynamic allocation done
+ * by the stdio package. Just set DISABLE_DYNAMIC to nonzero. Note that
+ * use of asprintf, getdelim, or getline will pull malloc into the link.
+ *
+ * Note: You can't trust FOPEN_MAX if DISABLE_DYNAMIC != 0.
+ */
+#define DISABLE_DYNAMIC 0
+
+/*
+ * As a feature, you can try to allow setvbuf calls after file operations.
+ * Setting FLEXIBLE_SETVBUF to nonzero will cause setvbuf to try to fflush
+ * any buffered writes or sync the file position for buffered reads. If it
+ * is successful, the buffer change can then take place.
+ */
+#define FLEXIBLE_SETVBUF 0
+/***********************************************************************/
+
+#if DISABLE_DYNAMIC != 0
+#undef malloc
+#undef free
+#define malloc(x) 0
+#define free(x)
+#endif
-extern FILE *__IO_list; /* For fflush at exit */
+extern FILE *__IO_list; /* For fflush. */
+extern FILE *_free_file_list;
+extern char _free_buffer_index;
extern FILE _stdio_streams[FIXED_STREAMS];
-extern struct fixed_buffer _fixed_buffers[FIXED_BUFFERS];
+extern unsigned char _fixed_buffers[FIXED_BUFFERS * BUFSIZ];
-#if defined L__fopen || defined L_fclose || defined L_setvbuf
extern unsigned char *_alloc_stdio_buffer(size_t size);
-extern void _free_stdio_buffer(unsigned char *buf);
-#endif
-
-#if defined L__fopen || defined L_fclose
+extern void _free_stdio_buffer_of_file(FILE *fp);
extern void _free_stdio_stream(FILE *fp);
-#endif
#ifdef L__alloc_stdio_buffer
unsigned char *_alloc_stdio_buffer(size_t size)
{
- if (size == BUFSIZ) {
- int i;
+ unsigned char *buf;
- for (i = 0; i < FIXED_BUFFERS; i++)
- if (!_fixed_buffers[i].used) {
- _fixed_buffers[i].used = 1;
- return _fixed_buffers[i].data;
- }
+ if ((size == BUFSIZ) && (_free_buffer_index < FIXED_BUFFERS)) {
+ buf = _fixed_buffers + ((unsigned int)_free_buffer_index) * BUFSIZ;
+ _free_buffer_index = *buf;
+ return buf;
}
return malloc(size);
}
#endif
-#ifdef L__free_stdio_buffer
-void _free_stdio_buffer(unsigned char *buf)
+#ifdef L__free_stdio_buffer_of_file
+void _free_stdio_buffer_of_file(FILE *fp)
{
- int i;
+ unsigned char *buf;
- for (i = 0; i < FIXED_BUFFERS; i++) {
- if (buf == _fixed_buffers[i].data) {
- _fixed_buffers[i].used = 0;
- return;
- }
+ if (!(fp->mode & __MODE_FREEBUF)) {
+ return;
+ }
+ fp->mode &= ~(__MODE_FREEBUF);
+ buf = fp->bufstart;
+
+ if ((buf >= _fixed_buffers)
+ && (buf < _fixed_buffers + (FIXED_BUFFERS * BUFSIZ))) {
+ *buf = _free_buffer_index;
+ _free_buffer_index = (buf - _fixed_buffers)/BUFSIZ;
+ return;
}
free(buf);
}
@@ -86,26 +156,30 @@ void _free_stdio_buffer(unsigned char *buf)
#error FIXED_BUFFERS must be >= 2
#endif
-#define bufin (_fixed_buffers[0].data)
-#define bufout (_fixed_buffers[1].data)
-#define buferr (_stdio_streams[2].unbuf) /* Stderr is unbuffered */
+#if FIXED_BUFFERS >= UCHAR_MAX
+#error FIXED_BUFFERS must be < UCHAR_MAX
+#endif
+
+#define bufin (_fixed_buffers)
+#define bufout (_fixed_buffers + BUFSIZ)
+#define buferr (_stdio_streams[2].unbuf) /* Stderr is unbuffered */
-struct fixed_buffer _fixed_buffers[FIXED_BUFFERS];
+unsigned char _fixed_buffers[FIXED_BUFFERS * BUFSIZ];
#if FIXED_STREAMS < 3
#error FIXED_STREAMS must be >= 3
#endif
FILE _stdio_streams[FIXED_STREAMS] = {
- {bufin, bufin, bufin, bufin, bufin + BUFSIZ,
- 0, _IOFBF | __MODE_READ | __MODE_FREEBUF,
- _stdio_streams + 1},
- {bufout, bufout, bufout, bufout, bufout + BUFSIZ,
- 1, _IOFBF | __MODE_WRITE | __MODE_FREEBUF,
- _stdio_streams + 2},
- {buferr, buferr, buferr, buferr, buferr + sizeof(buferr),
- 2, _IONBF | __MODE_WRITE,
- 0},
+ {bufin, bufin, 0, bufin, bufin + BUFSIZ,
+ _stdio_streams + 1,
+ 0, _IOFBF | __MODE_FREEFIL | __MODE_FREEBUF | __MODE_TIED },
+ {bufout, 0, bufout, bufout, bufout + BUFSIZ,
+ _stdio_streams + 2,
+ 1, _IOFBF | __MODE_FREEFIL | __MODE_FREEBUF | __MODE_TIED },
+ {buferr, 0, buferr, buferr, buferr + 1,
+ NULL,
+ 2, _IONBF | __MODE_FREEFIL }
};
FILE *_stdin = _stdio_streams + 0;
@@ -117,7 +191,10 @@ FILE *_stderr = _stdio_streams + 2;
* any of the stdio functions are used since they all call fflush directly
* or indirectly.
*/
-FILE *__IO_list = _stdio_streams; /* For fflush at exit */
+FILE *__IO_list = _stdio_streams; /* For fflush. */
+
+FILE *_free_file_list = 0;
+char _free_buffer_index = FIXED_BUFFERS;
/*
* __stdio_close_all is automatically when exiting if stdio is used.
@@ -125,12 +202,7 @@ FILE *__IO_list = _stdio_streams; /* For fflush at exit */
*/
void __stdio_close_all(void)
{
- FILE *fp;
-
- for (fp = __IO_list; fp; fp = fp->next) {
- fflush(fp);
- close(fp->fd);
- }
+ fflush(NULL); /* Files will be closed on _exit call. */
}
/*
@@ -142,19 +214,19 @@ void __init_stdio(void)
int i;
#endif
#if FIXED_BUFFERS > 2
+ _free_buffer_index = 2;
for ( i = 2 ; i < FIXED_BUFFERS ; i++ ) {
- _fixed_buffers[i].used = 0;
+ _fixed_buffers[i*BUFSIZ] = i;
}
#endif
#if FIXED_STREAMS > 3
- for ( i = 3 ; i < FIXED_STREAMS ; i++ ) {
- _stdio_streams[i].fd = -1;
+ _free_file_list = _stdio_streams + 3;
+ for ( i = 3 ; i < FIXED_STREAMS-1 ; i++ ) {
+ _stdio_streams[i].next = _stdio_streams + i + 1;
}
+ _stdio_streams[i].next = 0;
#endif
- _fixed_buffers[0].used = 1;
- _fixed_buffers[1].used = 1;
-
#if _IOFBF != 0 || _IOLBF != 1
#error Assumption violated -- values of _IOFBF and/or _IOLBF
/* This asssumption is also made in _fopen. */
@@ -166,229 +238,129 @@ void __init_stdio(void)
#endif
#ifdef L_fputc
-int fputc(ch, fp)
-int ch;
-FILE *fp;
+int fputc(int c, FILE *fp)
{
- register int v;
+ unsigned char buf[1];
- v = fp->mode;
- /* If last op was a read ... */
- if ((v & __MODE_READING) && fflush(fp))
- return EOF;
-
- /* Can't write or there's been an EOF or error then return EOF */
- if ((v & (__MODE_WRITE | __MODE_EOF | __MODE_ERR)) != __MODE_WRITE)
- return EOF;
-
- /* Buffer is full */
- if (fp->bufpos >= fp->bufend && fflush(fp))
- return EOF;
-
- /* Right! Do it! */
- *(fp->bufpos++) = ch;
- fp->mode |= __MODE_WRITING;
-
- /* Unbuffered or Line buffered and end of line */
- if (((ch == '\n' && (v & _IOLBF)) || (v & _IONBF))
- && fflush(fp))
- return EOF;
-
- /* Can the macro handle this by itself ? */
- if (v & (_IOLBF | _IONBF))
- fp->bufwrite = fp->bufstart; /* Nope */
- else
- fp->bufwrite = fp->bufend; /* Yup */
+ *buf = (unsigned char) c;
- /* Correct return val */
- return (unsigned char) ch;
+ if (_uClibc_fwrite(buf, 1, fp)) {
+ return (unsigned char) c;
+ }
+ return EOF;
}
#endif
#ifdef L_fgetc
-int fgetc(fp)
-FILE *fp;
+int fgetc(FILE *fp)
{
- int ch;
-
- if (fp->mode & __MODE_WRITING)
- fflush(fp);
-
-#if 1
-#warning Need to check out tie between stdin and stdout.
- /*
- * This bit of code needs checking. The way I read the C89 standard,
- * there is no guarantee that stdout is flushed before reading stdin.
- * Plus, this is broken if either stdin or stdout has been closed and
- * reopend.
- */
- if ( (fp == stdin) && (stdout->fd != -1)
- && (stdout->mode & __MODE_WRITING) )
- fflush(stdout);
-#endif
-
- /* Can't read or there's been an EOF or error then return EOF */
- if ((fp->mode & (__MODE_READ | __MODE_EOF | __MODE_ERR)) !=
- __MODE_READ) return EOF;
+ unsigned char buf[1];
- /* Nothing in the buffer - fill it up */
- if (fp->bufpos >= fp->bufread) {
- fp->bufpos = fp->bufread = fp->bufstart;
- ch = fread(fp->bufpos, 1, fp->bufend - fp->bufstart, fp);
- if (ch == 0)
- return EOF;
- fp->bufread += ch;
- fp->mode |= __MODE_READING;
- fp->mode &= ~__MODE_UNGOT;
+ if (_uClibc_fread(buf, 1, fp)) {
+ return *buf;
}
- ch = *(fp->bufpos++);
-
- return ch;
+ return EOF;
}
#endif
#ifdef L_fflush
-int fflush(fp)
-FILE *fp;
+int fflush(FILE *fp)
{
- int len, cc, rv;
- char *bstart;
+ int rv;
rv = 0;
+
if (fp == NULL) { /* On NULL flush the lot. */
for (fp = __IO_list; fp; fp = fp->next) {
- if (fflush(fp)) {
- rv = EOF;
- }
- }
- return rv;
- }
-
- /* If there's output data pending */
- if (fp->mode & __MODE_WRITING) {
- len = fp->bufpos - fp->bufstart;
-
- if (len) {
- bstart = fp->bufstart;
- /*
- * The loop is so we don't get upset by signals or partial writes.
- */
- do {
- cc = write(fp->fd, bstart, len);
- if (cc > 0) {
- bstart += cc;
- len -= cc;
- }
- }
- while (cc > 0 || (cc == -1 && errno == EINTR));
- /*
- * If we get here with len!=0 there was an error, exactly what to
- * do about it is another matter ...
- *
- * I'll just clear the buffer.
- */
- if (len) {
- fp->mode |= __MODE_ERR;
+ if (WRITEABLE(fp) && fflush(fp)) {
rv = EOF;
}
}
- }
- /* If there's data in the buffer sychronise the file positions */
- else if (fp->mode & __MODE_READING) {
- /* Humm, I think this means sync the file like fpurge() ... */
- /* Anyway the user isn't supposed to call this function when reading */
-
- len = fp->bufread - fp->bufpos; /* Bytes buffered but unread */
- /* If it's a file, make it good */
- if (len > 0 && lseek(fp->fd, (long) -len, 1) < 0) {
- /* Hummm - Not certain here, I don't think this is reported */
- /*
- * fp->mode |= __MODE_ERR; return EOF;
- */
+ } else if (WRITING(fp)) { /* Output buffer contents. */
+ _uClibc_fwrite(NULL, 0, fp);
+ if (fp->mode & __MODE_ERR) {
+ rv = -1;
}
+ } else if (!WRITEABLE(fp)) { /* File opened read-only!!! */
+ /*
+ * According to info, glibc returns an error when the file is opened
+ * in read-only mode.
+ * ANSI says behavior in this case is undefined but also says you
+ * shouldn't flush a stream you were reading from.
+ */
+ errno = EBADF; /* Should we set stream error indicator? */
+ rv = -1;
}
- /* All done, no problem */
- fp->mode &=
- (~(__MODE_READING | __MODE_WRITING | __MODE_EOF | __MODE_UNGOT));
- fp->bufread = fp->bufwrite = fp->bufpos = fp->bufstart;
return rv;
}
#endif
#ifdef L_fgets
/* Nothing special here ... */
-char *fgets(s, count, f)
-char *s;
-int count;
-FILE *f;
-{
- char *ret;
- register size_t i;
- register int ch;
-
- ret = s;
- for (i = count-1; i > 0; i--) {
- ch = getc(f);
+char *fgets(char *s, int count, FILE *fp)
+{
+ int ch;
+ char *p;
+
+ p = s;
+ while (count-- > 1) { /* Guard against count arg == INT_MIN. */
+ ch = getc(fp);
if (ch == EOF) {
- if (s == ret)
- return 0;
break;
}
- *s++ = (char) ch;
- if (ch == '\n')
+ *p++ = ch;
+ if (ch == '\n') {
break;
+ }
}
- *s = 0;
-
- if (ferror(f))
+ if (ferror(fp) || (s == p)) {
return 0;
- return ret;
+ }
+ *p = 0;
+ return s;
}
#endif
#ifdef L_gets
-char *gets(str) /* BAD function; DON'T use it! */
-char *str;
+char *gets(char *str) /* This is an UNSAFE function! */
{
- /* Auwlright it will work but of course _your_ program will crash */
- /* if it's given a too long line */
- register char *p = str;
- register int c;
-
- while (((c = getc(stdin)) != EOF) && (c != '\n'))
- *p++ = c;
- *p = '\0';
- return (((c == EOF) && (p == str)) ? NULL : str); /* NULL == EOF */
+ /*
+ * Strictly speaking, this implementation is incorrect as the number
+ * of chars gets can read should be unlimited. However, I can't
+ * imagine anyone wanting to gets() into a buffer bigger than INT_MAX.
+ *
+ * Besides, this function is inherently unsafe and shouldn't be used.
+ */
+ return fgets(str, INT_MAX, _stdin);
}
#endif
#ifdef L_fputs
-int fputs(str, fp)
-const char *str;
-FILE *fp;
+int fputs(const char *str, FILE *fp)
{
- register int n = 0;
+ int n;
- while (*str) {
- if (putc(*str++, fp) == EOF)
- return (EOF);
- ++n;
+ n = strlen(str);
+
+ _uClibc_fwrite((const unsigned char *)str, n, fp);
+ if (fp->mode & __MODE_ERR) {
+ n = EOF;
}
- return (n);
+ return n;
}
#endif
#ifdef L_puts
-int puts(str)
-const char *str;
+int puts(const char *str)
{
- register int n;
+ int n;
- if (((n = fputs(str, stdout)) == EOF)
- || (putc('\n', stdout) == EOF))
- return (EOF);
- return (++n);
+ n = fputs(str, _stdout); /* Let next fputc handle EOF or error. */
+ if (fputc('\n', _stdout) == EOF) { /* Don't use putc since we want to */
+ return EOF; /* fflush stdout if it is line buffered. */
+ }
+ return n + 1;
}
#endif
@@ -404,43 +376,74 @@ size_t size;
size_t nelm;
FILE *fp;
{
- int len, v;
- unsigned bytes, got = 0;
+ off_t bytes;
- v = fp->mode;
+#warning TODO: handle possible overflow for bytes
+ bytes = size * nelm; /* How many bytes do we want? */
- /* Want to do this to bring the file pointer up to date */
- if (v & __MODE_WRITING)
- fflush(fp);
+ bytes = _uClibc_fread((unsigned char *)buf, bytes, fp);
+
+ return bytes/size;
+}
+#endif
+
+#ifdef L__uClibc_fread
+off_t _uClibc_fread(unsigned char *buf, off_t bytes, FILE *fp)
+{
+ unsigned char *p;
+ off_t len;
- /* Can't read or there's been an EOF or error then return zero */
- if ((v & (__MODE_READ | __MODE_EOF | __MODE_ERR)) != __MODE_READ)
+ if (!READABLE(fp)) {
+ fp->mode |= __MODE_ERR;
+ } else if (WRITING(fp)) {
+ fflush(fp);
+ } else if (fp->mode & _stdout->mode & __MODE_TIED) {
+ fflush(_stdout);
+ }
+ if (EOF_OR_ERROR(fp) || (bytes <= 0)) {
return 0;
+ }
+
+ p = (unsigned char *) buf;
- /* This could be long, doesn't seem much point tho */
- bytes = size * nelm;
+ if (fp->mode & __MODE_UNGOT) { /* If we had an ungetc'd char, */
+ fp->mode ^= __MODE_UNGOT; /* reset the flag and return it. */
+ *p++ = fp->ungot;
+ --bytes;
+ }
+ FROM_BUF:
len = fp->bufread - fp->bufpos;
- if (len >= bytes) { /* Enough buffered */
- memcpy(buf, fp->bufpos, (unsigned) bytes);
- fp->bufpos += bytes;
- return bytes;
- } else if (len > 0) { /* Some buffered */
- memcpy(buf, fp->bufpos, len);
- got = len;
+ if (len > bytes) { /* Enough buffered */
+ len = bytes;
+ }
+
+ bytes -= len;
+ while (len--) {
+ *p++ = *fp->bufpos++;
}
- /* Need more; do it with a direct read */
- len = read(fp->fd, buf + got, (unsigned) (bytes - got));
+ if (bytes && !EOF_OR_ERROR(fp)) { /* More requested but buffer empty. */
+ if (bytes < fp->bufend - fp->bufstart) {
+ fp->bufpos = fp->bufread = fp->bufstart; /* Reset pointers. */
+ fp->bufread += _uClibc_fread(fp->bufstart,
+ fp->bufend - fp->bufstart, fp);
+ goto FROM_BUF;
+ }
- /* Possibly for now _or_ later */
- if (len < 0) {
- fp->mode |= __MODE_ERR;
- len = 0;
- } else if (len == 0)
- fp->mode |= __MODE_EOF;
+ len = read(fp->fd, p, (unsigned) bytes);
+ if (len < 0) {
+ fp->mode |= __MODE_ERR;
+ } else {
+ p += len;
+ if (len == 0) {
+ fp->mode |= __MODE_EOF;
+ }
+ }
+ }
+
+ return (p - (unsigned char *)buf);
- return (got + len) / size;
}
#endif
@@ -457,60 +460,95 @@ size_t size;
size_t nelm;
FILE *fp;
{
- register int v;
- int len;
- unsigned bytes, put;
+ off_t bytes;
- v = fp->mode;
- /* If last op was a read ... */
- if ((v & __MODE_READING) && fflush(fp))
- return 0;
+#warning TODO: handle possible overflow for bytes
+ bytes = size * nelm; /* How many bytes do we want? */
- /* Can't write or there's been an EOF or error then return 0 */
- if ((v & (__MODE_WRITE | __MODE_EOF | __MODE_ERR)) != __MODE_WRITE)
- return 0;
+ bytes = _uClibc_fwrite((const unsigned char *)buf, bytes, fp);
+
+ return bytes/size;
+}
+#endif
- /* This could be long, doesn't seem much point tho */
- bytes = size * nelm;
+#ifdef L__uClibc_fwrite
+/*
+ * If buf == NULL, fflush.
+ * If buf != NULL, (fflush and) write
+ * Returns number of chars written from fp buffer _OR_ from buf.
+ */
- len = fp->bufend - fp->bufpos;
+off_t _uClibc_fwrite(const unsigned char *buf, off_t bytes, FILE *fp)
+{
+ unsigned char *p;
+ int rv, had_newline;
- /* Flush the buffer if not enough room */
- if (bytes > len)
- if (fflush(fp))
- return 0;
+ /*
+ * Fail if stream isn't writable, if we were reading and get an error
+ * changing over to write mode (ie. can't update stream position),
+ * or if the stream was already in an error state.
+ */
+ if (!WRITEABLE(fp)) { /* Fail if stream isn't writable. */
+ fp->mode |= __MODE_ERR;
+ } else if (READING(fp)) { /* If read buffer isn't empty, */
+ fseek(fp, 0, SEEK_CUR); /* stop reading and update position. */
+ } else if (READABLE(fp)) {
+ fp->bufread = fp->bufstart; /* Reset start of read buffer. */
+ }
+ if (EOF_OR_ERROR(fp)) {
+ return 0;
+ }
- len = fp->bufend - fp->bufpos;
- if (bytes <= len) { /* It'll fit in the buffer ? */
- fp->mode |= __MODE_WRITING;
- memcpy(fp->bufpos, buf, bytes);
- fp->bufpos += bytes;
-
- /* If we're not fully buffered */
- if (v & (_IOLBF | _IONBF))
- fflush(fp);
-
- return nelm;
- } else
- /* Too big for the buffer */
- {
- put = bytes;
- do {
- len = write(fp->fd, buf, bytes);
- if (len > 0) {
- buf += len;
- bytes -= len;
+ p = (unsigned char *)buf;
+ if (p && (fp->bufpos + bytes <= fp->bufend)) { /* Enough buffer space? */
+ had_newline = 0;
+ while (bytes--) {
+ if (*p == '\n') {
+ had_newline = 1;
}
+ *fp->bufpos++ = *p++;
}
- while (len > 0 || (len == -1 && errno == EINTR));
-
- if (len < 0)
- fp->mode |= __MODE_ERR;
+ if (fp->bufpos < fp->bufend) { /* Buffer is not full. */
+ fp->bufwrite = fp->bufend;
+ if ((fp->mode & __MODE_BUF) == _IOLBF) {
+ fp->bufwrite = fp->bufpos;
+ if (had_newline) {
+ goto FFLUSH;
+ }
+ }
+ goto DONE;
+ }
+ FFLUSH:
+ /* If we get here, either buffer is full or we need to flush anyway. */
+ p = NULL;
+ }
+ if (!p) { /* buf == NULL means fflush */
+ p = fp->bufstart;
+ bytes = fp->bufpos - p;
+ buf = fp->bufpos = fp->bufwrite = p;
+ } else if (fp->bufpos > fp->bufstart) { /* If there are buffered chars, */
+ _uClibc_fwrite(NULL, 0, fp); /* write them. */
+ if (ferror(fp)) {
+ return 0;
+ }
+ }
- put -= bytes;
+ while (bytes) {
+ if ((rv = write(fp->fd, p, bytes)) < 0) {
+ rv = 0;
+ if (errno != EINTR) {
+ break;
+ }
+ }
+ p += rv;
+ bytes -= rv;
+ }
+ if (bytes) {
+ fp->mode |= __MODE_ERR;
}
- return put / size;
+ DONE:
+ return (p - (unsigned char *)buf);
}
#endif
@@ -518,47 +556,45 @@ FILE *fp;
void rewind(fp)
FILE *fp;
{
- fseek(fp, (long) 0, 0);
- clearerr(fp);
+ clearerr(fp); /* Clear errors first, then seek in case */
+ fseek(fp, 0, SEEK_SET); /* there is an error seeking. */
}
#endif
#ifdef L_fseek
-int fseek(fp, offset, ref)
-FILE *fp;
-long offset;
-int ref;
+int fseek(FILE *fp, long int offset, int ref)
{
-#if 0
- /* FIXME: this is broken! BROKEN!!!! */
- /* if __MODE_READING and no ungetc ever done can just move pointer */
- /* This needs testing! */
-
- if ((fp->mode & (__MODE_READING | __MODE_UNGOT)) == __MODE_READING &&
- (ref == SEEK_SET || ref == SEEK_CUR)) {
- long fpos = lseek(fp->fd, 0L, SEEK_CUR);
+#if SEEK_SET != 0 || SEEK_CUR != 1 || SEEK_END != 2
+#error Assumption violated -- values of SEEK_SET, SEEK_CUR, SEEK_END
+#endif
- if (fpos == -1)
- return EOF;
+ if ((ref < 0) || (ref > 2)) {
+ errno = EINVAL;
+ return -1;
+ }
+ if (WRITING(fp)) {
+ fflush(fp); /* We'll deal with errors below. */
+ /* After fflush, bufpos is at CUR. */
+ } else if (READING(fp)) {
if (ref == SEEK_CUR) {
- ref = SEEK_SET;
- offset = fpos + offset + fp->bufpos - fp->bufread;
- }
- if (ref == SEEK_SET) {
- if (offset < fpos
- && offset >= fpos + fp->bufstart - fp->bufread) {
- fp->bufpos = offset - fpos + fp->bufread;
- return 0;
+ /* Correct offset to take into account position in buffer. */
+ offset -= (fp->bufread - fp->bufpos);
+ if (fp->mode & __MODE_UNGOT) { /* If we had an ungetc'd char, */
+ --offset; /* adjust offset (clear flag below). */
}
}
+ fp->bufpos = fp->bufread = fp->bufstart;
}
-#endif
- /* Use fflush to sync the pointers */
- if (fflush(fp) || (lseek(fp->fd, offset, ref) < 0)) {
- return EOF;
+ if ((fp->mode & __MODE_ERR) ||
+ (((ref != SEEK_CUR) || offset) && (lseek(fp->fd, offset, ref) < 0))) {
+ fp->mode |= __MODE_ERR; /* Possibly redundant, but doesn't hurt. */
+ return -1;
}
+
+ fp->mode &= ~(__MODE_EOF | __MODE_UNGOT);
+
return 0;
}
#endif
@@ -567,9 +603,28 @@ int ref;
long ftell(fp)
FILE *fp;
{
- if (fflush(fp) == EOF)
- return EOF;
- return lseek(fp->fd, 0L, SEEK_CUR);
+ /* Note: can't do fflush here since it would discard any ungetc's. */
+ off_t pos;
+
+ pos = lseek(fp->fd, 0, SEEK_CUR); /* Get kernels idea of position. */
+ if (pos < 0) {
+ return -1;
+ }
+
+ if (WRITING(fp)) {
+ pos += (fp->bufpos - fp->bufstart); /* Adjust for buffer position. */
+ } else if (READING(fp)) {
+ pos -= (fp->bufread - fp->bufpos); /* Adjust for buffer position. */
+ if (fp->mode & __MODE_UNGOT) {
+ --pos;
+ }
+ if (pos < 0) { /* ungetcs at start of file? */
+ errno = EIO;
+ pos = -1;
+ }
+ }
+
+ return pos;
}
#endif
@@ -578,6 +633,23 @@ FILE *fp;
* This Fopen is all three of fopen, fdopen and freopen. The macros in
* stdio.h show the other names.
*/
+static __inline FILE *_alloc_stdio_stream(void)
+{
+ FILE *fp;
+
+ if (_free_file_list) {
+ fp = _free_file_list;
+ _free_file_list = fp->next;
+ } else if (!(fp = malloc(sizeof(FILE)))) {
+ return 0;
+ }
+ fp->mode = __MODE_FREEFIL | _IOFBF;
+ /* Initially set to use builtin buffer of FILE structure. */
+ fp->bufstart = fp->unbuf;
+ fp->bufend = fp->unbuf + sizeof(fp->unbuf);
+ return fp;
+}
+
FILE *__fopen(fname, fd, fp, mode)
const char *fname;
int fd;
@@ -586,30 +658,19 @@ const char *mode;
{
FILE *nfp;
int open_mode;
- int fopen_mode;
- int i;
+ int cur_mode;
nfp = fp;
- /* If we've got an fp, flush it and close the old fd (freopen) */
- if (nfp) { /* We don't want to deallocate fp. */
- fflush(nfp);
- close(nfp->fd);
- nfp->mode &= (__MODE_FREEFIL | __MODE_FREEBUF);
- }
-
/* Parse the mode string arg. */
switch (*mode++) {
case 'r': /* read */
- fopen_mode = __MODE_READ;
open_mode = O_RDONLY;
break;
case 'w': /* write (create or truncate)*/
- fopen_mode = __MODE_WRITE;
open_mode = (O_WRONLY | O_CREAT | O_TRUNC);
break;
case 'a': /* write (create or append) */
- fopen_mode = __MODE_WRITE;
open_mode = (O_WRONLY | O_CREAT | O_APPEND);
break;
default: /* illegal mode */
@@ -621,9 +682,13 @@ const char *mode;
++mode;
}
+
+#if O_RDONLY != 0 || O_WRONLY != 1 || O_RDWR != 2
+#error Assumption violated concerning open mode constants!
+#endif
+
if (*mode == '+') { /* read-write */
++mode;
- fopen_mode |= __MODE_RDWR;
open_mode &= ~(O_RDONLY | O_WRONLY);
open_mode |= O_RDWR;
}
@@ -636,32 +701,23 @@ const char *mode;
}
if (fp == 0) { /* We need a FILE so allocate it before */
- for (i = 0; i < FIXED_STREAMS; i++) { /* we potentially call open. */
- if (_stdio_streams[i].fd == -1) {
- nfp = _stdio_streams + i;
- break;
- }
- }
- if ((i == FIXED_STREAMS) && (!(nfp = malloc(sizeof(FILE))))) {
+ if (!(nfp = _alloc_stdio_stream())) {
return 0;
}
- nfp->mode = __MODE_FREEFIL;
- /* Initially set to use 8 byte buffer in FILE structure */
- nfp->bufstart = nfp->unbuf;
- nfp->bufend = nfp->unbuf + sizeof(nfp->unbuf);
}
if (fname) { /* Open the file itself */
fd = open(fname, open_mode, 0666);
+ } else { /* fdopen -- check mode is compatible. */
+ cur_mode = fcntl(fd, F_GETFL);
+ if ((cur_mode == -1) || ((cur_mode ^ open_mode) & O_ACCMODE)) {
+ fd = -1;
+ }
}
-#warning fdopen should check that modes are compatible with existing fd.
if (fd < 0) { /* Error from open or bad arg passed. */
_fopen_ERROR:
if (nfp) {
- if (nfp->mode & __MODE_FREEBUF) {
- _free_stdio_buffer(nfp->bufstart);
- }
_free_stdio_stream(nfp);
}
return 0;
@@ -680,9 +736,15 @@ const char *mode;
}
/* Ok, file's ready clear the buffer and save important bits */
- nfp->bufpos = nfp->bufread = nfp->bufwrite = nfp->bufstart;
- nfp->mode |= fopen_mode;
+ nfp->bufpos = nfp->bufstart;
nfp->mode |= isatty(fd);
+ nfp->bufread = nfp->bufwrite = 0;
+ if (!(open_mode & O_WRONLY)) {
+ nfp->bufread = nfp->bufstart;
+ }
+ if (open_mode & (O_WRONLY | O_RDWR)) {
+ nfp->bufwrite = nfp->bufstart;
+ }
return nfp;
}
@@ -696,18 +758,14 @@ FILE *fp;
FILE *ptr;
int rv;
- assert(fp); /* Shouldn't be NULL */
- assert(fp->fd >= 0); /* Need file descriptor in valid range. */
-
- rv = fflush(fp);
+ rv = 0;
+ if (WRITING(fp)) { /* If there are buffered chars to write... */
+ rv = fflush(fp); /* write them. */
+ }
if (close(fp->fd)) { /* Need to close even if fflush fails. */
rv = EOF;
}
- if (fp->mode & __MODE_FREEBUF) { /* Free buffer if necessary. */
- _free_stdio_buffer(fp->bufstart);
- }
-
prev = 0; /* Remove file from open list. */
for (ptr = __IO_list; ptr ; ptr = ptr->next) {
if (ptr == fp) {
@@ -731,28 +789,24 @@ FILE *fp;
/* The following is only called by fclose and _fopen. */
void _free_stdio_stream(FILE *fp)
{
- int i;
-
+ _free_stdio_buffer_of_file(fp); /* Free buffer if necessary. */
+
if (!(fp->mode & __MODE_FREEFIL)) {
return;
}
- for (i = 0; i < FIXED_STREAMS; i++) {
- if (fp == _stdio_streams + i) {
- fp->fd = -1;
- return;
- }
+ /* Note: we generally won't bother checking for bad pointers here. */
+ if ((fp >= _stdio_streams) && (fp < _stdio_streams + FIXED_STREAMS)) {
+ assert( (fp - _stdio_streams) % sizeof(_stdio_streams[0]) == 0 );
+ fp->next = _free_file_list;
+ _free_file_list = fp;
+ return;
}
free(fp);
}
#endif
#ifdef L_setbuffer
-/*
- * Rewritten Feb 2001 Manuel Novoa III
- *
- * Just call setvbuf with appropriate args.
- */
void setbuffer(FILE *fp, char *buf, size_t size)
{
int mode;
@@ -766,31 +820,27 @@ void setbuffer(FILE *fp, char *buf, size_t size)
#endif
#ifdef L_setvbuf
-/*
- * Rewritten Feb 2001 Manuel Novoa III
- *
- * Bugs in previous version:
- * No checking on mode arg.
- * If alloc of new buffer failed, some FILE fields not set correctly.
- * If requested buf is same size as current and buf is NULL, then
- * don't free current buffer; just use it.
- */
-
int setvbuf(FILE *fp, char *buf, int mode, size_t size)
{
int allocated_buf_flag;
- if (fflush(fp)) { /* Standard requires no ops before setvbuf */
- return EOF; /* called. We'll try to be more flexible. */
+ if ((mode < 0) || (mode > 2)) { /* Illegal mode. */
+ return EOF;
}
- if (mode & ~__MODE_BUF) { /* Illegal mode. */
+#if FLEXIBLE_SETVBUF
+ /* C89 standard requires no ops before setvbuf, but we can be flexible. */
+ /* NOTE: This will trash any chars ungetc'd!!! */
+ if (fseek(fp, 0, SEEK_CUR)) {
return EOF;
}
+#endif
- if ((mode == _IONBF) || (size <= sizeof(fp->unbuf))) {
- size = sizeof(fp->unbuf); /* Either no buffering requested or */
- buf = fp->unbuf; /* requested buffer size very small. */
+ /* Note: If size == 2 we could use FILE's builting buffer as well, but */
+ /* I don't think the benefit is worth the code size increase. */
+ if ((mode == _IONBF) || (size < 1)) {
+ size = 1; /* size == 1 _REQUIRED_ for _IONBF!!! */
+ buf = fp->unbuf;
}
fp->mode &= ~(__MODE_BUF); /* Clear current mode */
@@ -801,19 +851,22 @@ int setvbuf(FILE *fp, char *buf, int mode, size_t size)
/* No buffer supplied and requested size different from current. */
allocated_buf_flag = __MODE_FREEBUF;
if (!(buf = _alloc_stdio_buffer(size))) {
- return EOF;
+ return EOF; /* Keep current buffer. */
}
}
if (buf && (buf != (char *) fp->bufstart)) { /* Want different buffer. */
- if (fp->mode & __MODE_FREEBUF) {
- _free_stdio_buffer(fp->bufstart);
- fp->mode &= ~(__MODE_FREEBUF);
- }
- fp->mode |= allocated_buf_flag;
+ _free_stdio_buffer_of_file(fp); /* Free the old buffer. */
+ fp->mode |= allocated_buf_flag; /* Allocated? or FILE's builtin. */
fp->bufstart = buf;
fp->bufend = buf + size;
- fp->bufpos = fp->bufread = fp->bufwrite = fp->bufstart;
+ fp->bufpos = fp->bufstart;
+ if (READABLE(fp)) {
+ fp->bufread = fp->bufstart;
+ }
+ if (WRITEABLE(fp)) {
+ fp->bufwrite = fp->bufstart;
+ }
}
return 0;
@@ -841,26 +894,47 @@ void setlinebuf(FILE *fp)
#endif
#ifdef L_ungetc
+/*
+ * NOTE: Only one character of pushback is guaranteed, although sometimes
+ * it is possible to do more. You have 1 plus as many characters of pushback
+ * as have been read since that last buffer-fill.
+ */
int ungetc(c, fp)
int c;
FILE *fp;
{
- if (fp->mode & __MODE_WRITING)
+ unsigned char *p;
+
+ /* If can't read or there's been an error, or c == EOF, or ungot slot
+ * already filled, then return EOF */
+ /*
+ * This can only happen if an fgetc triggered a read (that filled
+ * the buffer for case 2 above) and then we ungetc 3 chars.
+ */
+ if (!READABLE(fp) || (fp->mode & (__MODE_UNGOT | __MODE_ERR))
+ || (c == EOF) ) {
+ return EOF;
+ }
+
+ if (WRITING(fp)) { /* Commit any write-buffered chars. */
fflush(fp);
+ }
- /* Can't read or there's been an error then return EOF */
- if ((fp->mode & (__MODE_READ | __MODE_ERR)) != __MODE_READ)
- return EOF;
+ if (fp->bufpos > fp->bufstart) { /* We have space before bufpos. */
+ p = --fp->bufpos;
+ } else if (fp->bufread == fp->bufpos) { /* Buffer is empty. */
+ p = fp->bufread++;
+ } else {
+ fp->mode |= __MODE_UNGOT;
+ p = &(fp->ungot);
+ }
+ fp->mode &= ~(__MODE_EOF); /* Clear EOF indicator. */
- /* Can't do fast fseeks */
- fp->mode |= __MODE_UNGOT;
+ if (*p != (unsigned char) c) { /* Don't store if same, because could */
+ *p = (unsigned char) c; /* be sscanf from a const string!!! */
+ }
- if (fp->bufpos > fp->bufstart)
- return *--fp->bufpos = (unsigned char) c;
- else if (fp->bufread == fp->bufstart)
- return *fp->bufread++ = (unsigned char) c;
- else
- return EOF;
+ return c;
}
#endif
@@ -874,10 +948,29 @@ FILE *fopen(const char *__restrict filename,
#endif
#ifdef L_freopen
-#undef freopen
FILE *freopen(__const char *__restrict filename,
__const char *__restrict mode, FILE *__restrict fp)
{
+ /* fflush file, close the old fd, and reset modes. */
+ if (WRITING(fp)) { /* If anything in the write buffer... */
+ fflush(fp); /* write it. */
+ }
+ close(fp->fd); /* Close the file. */
+ fp->mode &= (__MODE_FREEFIL | __MODE_FREEBUF); /* Reset the FILE modes. */
+ fp->mode |= _IOFBF;
+
+ return __fopen(filename, -1, fp, mode);
+}
+#endif
+
+#ifdef L_fsfopen
+FILE *fsfopen(__const char *__restrict filename,
+ __const char *__restrict mode, FILE *__restrict fp)
+{
+ fp->mode = _IOFBF;
+ fp->bufstart = fp->unbuf;
+ fp->bufend = fp->unbuf + sizeof(fp->unbuf);
+
return __fopen(filename, -1, fp, mode);
}
#endif
@@ -894,7 +987,7 @@ FILE *fdopen(int fd, __const char *mode)
#undef getchar
int getchar(void)
{
- return getc(stdin);
+ return getc(_stdin);
}
#endif
@@ -902,7 +995,7 @@ int getchar(void)
#undef putchar
int putchar(int c)
{
- return putc(c, stdout);
+ return putc(c, _stdout);
}
#endif
@@ -910,9 +1003,7 @@ int putchar(int c)
#undef clearerr
void clearerr(FILE *fp)
{
- assert(fp);
-
- fp->mode &= ~(__MODE_EOF|__MODE_ERR);
+ fp->mode &= ~(__MODE_EOF | __MODE_ERR);
}
#endif
@@ -920,9 +1011,7 @@ void clearerr(FILE *fp)
#undef feof
int feof(FILE *fp)
{
- assert(fp);
-
- return ((fp->mode & __MODE_EOF) != 0);
+ return fp->mode & __MODE_EOF;
}
#endif
@@ -930,18 +1019,13 @@ int feof(FILE *fp)
#undef ferror
int ferror(FILE *fp)
{
- assert(fp);
-
- return ((fp->mode & __MODE_ERR) != 0);
+ return fp->mode & __MODE_ERR;
}
#endif
#ifdef L_fileno
int fileno(FILE *fp)
{
- if (!fp || (fp->fd < 0)) {
- return -1;
- }
return fp->fd;
}
#endif