Add support for PowerPC e500, libc part only.

Math support to be done.
From Steve Papacharalambous, stevep@freescale.com

1 files changed, 0 insertions, 145 deletions

diff --git a/libc/sysdeps/linux/powerpc/bits/fenv.h b/libc/sysdeps/linux/powerpc/bits/fenv.h
deleted file mode 100644
index 8509b4b0c..000000000
--- a/libc/sysdeps/linux/powerpc/bits/fenv.h
+++ /dev/null
@@ -1,145 +0,0 @@
-/* Copyright (C) 1997, 1998, 1999 Free Software Foundation, Inc.
-   This file is part of the GNU C Library.
-
-   The GNU C Library is free software; you can redistribute it and/or
-   modify it under the terms of the GNU Lesser General Public
-   License as published by the Free Software Foundation; either
-   version 2.1 of the License, or (at your option) any later version.
-
-   The GNU C Library is distributed in the hope that it will be useful,
-   but WITHOUT ANY WARRANTY; without even the implied warranty of
-   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
-   Lesser General Public License for more details.
-
-   You should have received a copy of the GNU Lesser General Public
-   License along with the GNU C Library; if not, write to the Free
-   Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA
-   02111-1307 USA.  */
-
-#ifndef _FENV_H
-# error "Never use <bits/fenv.h> directly; include <fenv.h> instead."
-#endif
-
-
-/* Define bits representing the exception.  We use the bit positions of
-   the appropriate bits in the FPSCR...  */
-enum
-  {
-    FE_INEXACT = 1 << (31 - 6),
-#define FE_INEXACT	FE_INEXACT
-    FE_DIVBYZERO = 1 << (31 - 5),
-#define FE_DIVBYZERO	FE_DIVBYZERO
-    FE_UNDERFLOW = 1 << (31 - 4),
-#define FE_UNDERFLOW	FE_UNDERFLOW
-    FE_OVERFLOW = 1 << (31 - 3),
-#define FE_OVERFLOW	FE_OVERFLOW
-
-    /* ... except for FE_INVALID, for which we use bit 31. FE_INVALID
-       actually corresponds to bits 7 through 12 and 21 through 23
-       in the FPSCR, but we can't use that because the current draft
-       says that it must be a power of 2.  Instead we use bit 2 which
-       is the summary bit for all the FE_INVALID exceptions, which
-       kind of makes sense.  */
-    FE_INVALID = 1 << (31 - 2),
-#define FE_INVALID	FE_INVALID
-
-#ifdef __USE_GNU
-    /* Breakdown of the FE_INVALID bits. Setting FE_INVALID on an
-       input to a routine is equivalent to setting all of these bits;
-       FE_INVALID will be set on output from a routine iff one of
-       these bits is set.  Note, though, that you can't disable or
-       enable these exceptions individually.  */
-
-    /* Operation with SNaN. */
-    FE_INVALID_SNAN = 1 << (31 - 7),
-# define FE_INVALID_SNAN	FE_INVALID_SNAN
-
-    /* Inf - Inf */
-    FE_INVALID_ISI = 1 << (31 - 8),
-# define FE_INVALID_ISI		FE_INVALID_ISI
-
-    /* Inf / Inf */
-    FE_INVALID_IDI = 1 << (31 - 9),
-# define FE_INVALID_IDI		FE_INVALID_IDI
-
-    /* 0 / 0 */
-    FE_INVALID_ZDZ = 1 << (31 - 10),
-# define FE_INVALID_ZDZ		FE_INVALID_ZDZ
-
-    /* Inf * 0 */
-    FE_INVALID_IMZ = 1 << (31 - 11),
-# define FE_INVALID_IMZ		FE_INVALID_IMZ
-
-    /* Comparison with NaN or SNaN.  */
-    FE_INVALID_COMPARE = 1 << (31 - 12),
-# define FE_INVALID_COMPARE	FE_INVALID_COMPARE
-
-    /* Invalid operation flag for software (not set by hardware).  */
-    /* Note that some chips don't have this implemented, presumably
-       because no-one expected anyone to write software for them %-).  */
-    FE_INVALID_SOFTWARE = 1 << (31 - 21),
-# define FE_INVALID_SOFTWARE	FE_INVALID_SOFTWARE
-
-    /* Square root of negative number (including -Inf).  */
-    /* Note that some chips don't have this implemented.  */
-    FE_INVALID_SQRT = 1 << (31 - 22),
-# define FE_INVALID_SQRT	FE_INVALID_SQRT
-
-    /* Conversion-to-integer of a NaN or a number too large or too small.  */
-    FE_INVALID_INTEGER_CONVERSION = 1 << (31 - 23)
-# define FE_INVALID_INTEGER_CONVERSION	FE_INVALID_INTEGER_CONVERSION
-
-# define FE_ALL_INVALID \
-        (FE_INVALID_SNAN | FE_INVALID_ISI | FE_INVALID_IDI | FE_INVALID_ZDZ \
-	 | FE_INVALID_IMZ | FE_INVALID_COMPARE | FE_INVALID_SOFTWARE \
-	 | FE_INVALID_SQRT | FE_INVALID_INTEGER_CONVERSION)
-#endif
-  };
-
-#define FE_ALL_EXCEPT \
-	(FE_INEXACT | FE_DIVBYZERO | FE_UNDERFLOW | FE_OVERFLOW | FE_INVALID)
-
-/* PowerPC chips support all of the four defined rounding modes.  We
-   use the bit pattern in the FPSCR as the values for the
-   appropriate macros.  */
-enum
-  {
-    FE_TONEAREST = 0,
-#define FE_TONEAREST	FE_TONEAREST
-    FE_TOWARDZERO = 1,
-#define FE_TOWARDZERO	FE_TOWARDZERO
-    FE_UPWARD = 2,
-#define FE_UPWARD	FE_UPWARD
-    FE_DOWNWARD = 3
-#define FE_DOWNWARD	FE_DOWNWARD
-  };
-
-/* Type representing exception flags.  */
-typedef unsigned int fexcept_t;
-
-/* Type representing floating-point environment.  We leave it as 'double'
-   for efficiency reasons (rather than writing it to a 32-bit integer). */
-typedef double fenv_t;
-
-/* If the default argument is used we use this value.  */
-extern const fenv_t __fe_dfl_env;
-#define FE_DFL_ENV	(&__fe_dfl_env)
-
-#ifdef __USE_GNU
-/* Floating-point environment where all exceptions are enabled.  Note that
-   this is not sufficient to give you SIGFPE.  */
-extern const fenv_t __fe_enabled_env;
-# define FE_ENABLED_ENV	(&__fe_enabled_env)
-
-/* Floating-point environment with (processor-dependent) non-IEEE floating
-   point.  */
-extern const fenv_t __fe_nonieee_env;
-# define FE_NONIEEE_ENV	(&__fe_nonieee_env)
-
-/* Floating-point environment with all exceptions enabled.  Note that
-   just evaluating this value will set the processor into 'FPU
-   exceptions imprecise recoverable' mode, which may cause a significant
-   performance penalty (but have no other visible effect).  */
-extern const fenv_t *__fe_nomask_env (void);
-# define FE_NOMASK_ENV	(__fe_nomask_env ())
-#endif