summaryrefslogtreecommitdiff
path: root/target/ag241
diff options
context:
space:
mode:
Diffstat (limited to 'target/ag241')
-rw-r--r--target/ag241/Makefile50
-rw-r--r--target/ag241/files/etc/inittab3
-rw-r--r--target/ag241/files/etc/network/interfaces9
-rw-r--r--target/ag241/kernel.config918
-rw-r--r--target/ag241/patches/ar7.patch90
-rw-r--r--target/ag241/target.mk5
-rw-r--r--target/ag241/tools/addpattern/Makefile4
-rw-r--r--target/ag241/tools/addpattern/addpattern.c255
-rw-r--r--target/ag241/tools/rules.mk7
-rw-r--r--target/ag241/tools/srec2bin/Makefile4
-rw-r--r--target/ag241/tools/srec2bin/srec2bin.c524
-rw-r--r--target/ag241/uclibc.config233
12 files changed, 0 insertions, 2102 deletions
diff --git a/target/ag241/Makefile b/target/ag241/Makefile
deleted file mode 100644
index ac95593fb..000000000
--- a/target/ag241/Makefile
+++ /dev/null
@@ -1,50 +0,0 @@
-# This file is part of the OpenADK project. OpenADK is copyrighted
-# material, please see the LICENCE file in the top-level directory.
-
-include $(TOPDIR)/rules.mk
-include $(TOPDIR)/mk/kernel.mk
-include $(TOPDIR)/mk/modules.mk
-include $(TOPDIR)/mk/kernel-build.mk
-include $(TOPDIR)/mk/image.mk
-
-$(TOOLS_BUILD_DIR):
- mkdir -p $(TOOLS_BUILD_DIR)
-
-tools-compile: $(TOOLS_BUILD_DIR)
- $(MAKE) -C tools/addpattern
- $(MAKE) -C tools/srec2bin
- $(MAKE) -C ../tools/squashfs prepare compile install
-
-kernel-install: tools-compile
- ${TARGET_CROSS}objcopy -S -O srec $(LINUX_DIR)/vmlinuz \
- $(LINUX_DIR)/vmlinux.srec
- PATH='${TARGET_PATH}' \
- srec2bin $(LINUX_DIR)/vmlinux.srec $(LINUX_DIR)/vmlinux.bin
- (dd if=/dev/zero bs=16 count=1; cat $(LINUX_DIR)/vmlinux.bin) > \
- $(LINUX_DIR)/vmlinux.tmp
- PATH='${TARGET_PATH}' \
- addpattern -p AG3B -b -r 2.0 -i $(LINUX_DIR)/vmlinux.tmp \
- -o $(BIN_DIR)/${ADK_TARGET}-${FS}-kernel 2>/dev/null
-
-ifeq ($(FS),squashfs)
-imageinstall: kernel-install $(BIN_DIR)/$(ROOTFSSQUASHFS)
- @if [ $$(stat --format=%s ${BUILD_DIR}/${ROOTFSSQUASHFS}) -gt 3801088 ];then \
- echo 'Image is too big!'; \
- else \
- ${CP} ${BUILD_DIR}/${ROOTFSSQUASHFS} ${BIN_DIR}/${ROOTFSSQUASHFS}; \
- echo The image file is $(ROOTFSSQUASHFS); \
- echo 'You can flash the image via tftp:'; \
- echo 'tftp 192.168.1.1'; \
- echo 'tftp> binary'; \
- echo "tftp> put $(ROOTFSSQUASHFS) upgrade_code.bin"; \
- fi
-endif
-ifeq ($(FS),nfsroot)
-imageinstall: kernel-install $(BIN_DIR)/$(ROOTFSUSERTARBALL)
- @echo 'The kernel file is: ${BIN_DIR}/${ADK_TARGET}-${FS}-kernel'
- @echo 'The nfs root tarball is: ${BIN_DIR}/${ROOTFSUSERTARBALL}'
- @echo 'You can flash the kernel via tftp:'
- @echo 'tftp 192.168.1.1'
- @echo 'tftp> binary'
- @echo 'tftp> put ${ADK_TARGET}-${FS}-kernel upgrade_code.bin'
-endif
diff --git a/target/ag241/files/etc/inittab b/target/ag241/files/etc/inittab
deleted file mode 100644
index 4566ae3e8..000000000
--- a/target/ag241/files/etc/inittab
+++ /dev/null
@@ -1,3 +0,0 @@
-::sysinit:/etc/init.d/rcS
-::shutdown:/etc/init.d/rcK
-ttyS0::respawn:/sbin/getty -i -L ttyS0 38400 vt100
diff --git a/target/ag241/files/etc/network/interfaces b/target/ag241/files/etc/network/interfaces
deleted file mode 100644
index 519928df9..000000000
--- a/target/ag241/files/etc/network/interfaces
+++ /dev/null
@@ -1,9 +0,0 @@
-auto lo
-iface lo inet loopback
-
-auto nas0
-iface nas0 inet manual
-
-auto br0
-iface br0 inet manual
- bridge-ports eth0 nas0
diff --git a/target/ag241/kernel.config b/target/ag241/kernel.config
deleted file mode 100644
index ab0ba7236..000000000
--- a/target/ag241/kernel.config
+++ /dev/null
@@ -1,918 +0,0 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.33.1
-# Sun Mar 28 22:44:19 2010
-#
-CONFIG_MIPS=y
-
-#
-# Machine selection
-#
-# CONFIG_MACH_ALCHEMY is not set
-CONFIG_AR7=y
-# CONFIG_BCM47XX is not set
-# CONFIG_BCM63XX is not set
-# CONFIG_MIPS_COBALT is not set
-# CONFIG_MACH_DECSTATION is not set
-# CONFIG_MACH_JAZZ is not set
-# CONFIG_LASAT is not set
-# CONFIG_MACH_LOONGSON is not set
-# CONFIG_MIPS_MALTA is not set
-# CONFIG_MIPS_SIM is not set
-# CONFIG_NEC_MARKEINS is not set
-# CONFIG_MACH_VR41XX is not set
-# CONFIG_NXP_STB220 is not set
-# CONFIG_NXP_STB225 is not set
-# CONFIG_PNX8550_JBS is not set
-# CONFIG_PNX8550_STB810 is not set
-# CONFIG_PMC_MSP is not set
-# CONFIG_PMC_YOSEMITE is not set
-# CONFIG_POWERTV is not set
-# CONFIG_SGI_IP22 is not set
-# CONFIG_SGI_IP27 is not set
-# CONFIG_SGI_IP28 is not set
-# CONFIG_SGI_IP32 is not set
-# CONFIG_SIBYTE_CRHINE is not set
-# CONFIG_SIBYTE_CARMEL is not set
-# CONFIG_SIBYTE_CRHONE is not set
-# CONFIG_SIBYTE_RHONE is not set
-# CONFIG_SIBYTE_SWARM is not set
-# CONFIG_SIBYTE_LITTLESUR is not set
-# CONFIG_SIBYTE_SENTOSA is not set
-# CONFIG_SIBYTE_BIGSUR is not set
-# CONFIG_SNI_RM is not set
-# CONFIG_MACH_TX39XX is not set
-# CONFIG_MACH_TX49XX is not set
-# CONFIG_MIKROTIK_RB532 is not set
-# CONFIG_WR_PPMC is not set
-# CONFIG_CAVIUM_OCTEON_SIMULATOR is not set
-# CONFIG_CAVIUM_OCTEON_REFERENCE_BOARD is not set
-# CONFIG_ALCHEMY_GPIO_INDIRECT is not set
-CONFIG_LOONGSON_UART_BASE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_ARCH_SUPPORTS_OPROFILE=y
-CONFIG_GENERIC_FIND_NEXT_BIT=y
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_CMOS_UPDATE=y
-CONFIG_SCHED_OMIT_FRAME_POINTER=y
-CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-CONFIG_CEVT_R4K_LIB=y
-CONFIG_CEVT_R4K=y
-CONFIG_CSRC_R4K_LIB=y
-CONFIG_CSRC_R4K=y
-CONFIG_DMA_NONCOHERENT=y
-CONFIG_DMA_NEED_PCI_MAP_STATE=y
-CONFIG_SYS_HAS_EARLY_PRINTK=y
-# CONFIG_NO_IOPORT is not set
-CONFIG_GENERIC_GPIO=y
-# CONFIG_CPU_BIG_ENDIAN is not set
-CONFIG_CPU_LITTLE_ENDIAN=y
-CONFIG_SYS_SUPPORTS_LITTLE_ENDIAN=y
-CONFIG_IRQ_CPU=y
-CONFIG_SWAP_IO_SPACE=y
-CONFIG_BOOT_ELF32=y
-CONFIG_MIPS_L1_CACHE_SHIFT=5
-
-#
-# CPU selection
-#
-# CONFIG_CPU_LOONGSON2E is not set
-# CONFIG_CPU_LOONGSON2F is not set
-CONFIG_CPU_MIPS32_R1=y
-# CONFIG_CPU_MIPS32_R2 is not set
-# CONFIG_CPU_MIPS64_R1 is not set
-# CONFIG_CPU_MIPS64_R2 is not set
-# CONFIG_CPU_R3000 is not set
-# CONFIG_CPU_TX39XX is not set
-# CONFIG_CPU_VR41XX is not set
-# CONFIG_CPU_R4300 is not set
-# CONFIG_CPU_R4X00 is not set
-# CONFIG_CPU_TX49XX is not set
-# CONFIG_CPU_R5000 is not set
-# CONFIG_CPU_R5432 is not set
-# CONFIG_CPU_R5500 is not set
-# CONFIG_CPU_R6000 is not set
-# CONFIG_CPU_NEVADA is not set
-# CONFIG_CPU_R8000 is not set
-# CONFIG_CPU_R10000 is not set
-# CONFIG_CPU_RM7000 is not set
-# CONFIG_CPU_RM9000 is not set
-# CONFIG_CPU_SB1 is not set
-# CONFIG_CPU_CAVIUM_OCTEON is not set
-CONFIG_SYS_SUPPORTS_ZBOOT=y
-CONFIG_SYS_SUPPORTS_ZBOOT_UART16550=y
-CONFIG_SYS_HAS_CPU_MIPS32_R1=y
-CONFIG_CPU_MIPS32=y
-CONFIG_CPU_MIPSR1=y
-CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y
-CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y
-CONFIG_HARDWARE_WATCHPOINTS=y
-
-#
-# Kernel type
-#
-CONFIG_32BIT=y
-# CONFIG_64BIT is not set
-CONFIG_PAGE_SIZE_4KB=y
-# CONFIG_PAGE_SIZE_8KB is not set
-# CONFIG_PAGE_SIZE_16KB is not set
-# CONFIG_PAGE_SIZE_32KB is not set
-# CONFIG_PAGE_SIZE_64KB is not set
-CONFIG_CPU_HAS_PREFETCH=y
-CONFIG_MIPS_MT_DISABLED=y
-# CONFIG_MIPS_MT_SMP is not set
-# CONFIG_MIPS_MT_SMTC is not set
-CONFIG_CPU_HAS_SYNC=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_CPU_SUPPORTS_HIGHMEM=y
-CONFIG_ARCH_FLATMEM_ENABLE=y
-CONFIG_ARCH_POPULATES_NODE_MAP=y
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=4
-# CONFIG_PHYS_ADDR_T_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=0
-CONFIG_VIRT_TO_BUS=y
-# CONFIG_KSM is not set
-CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
-CONFIG_TICK_ONESHOT=y
-# CONFIG_NO_HZ is not set
-CONFIG_HIGH_RES_TIMERS=y
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-# CONFIG_HZ_48 is not set
-CONFIG_HZ_100=y
-# CONFIG_HZ_128 is not set
-# CONFIG_HZ_250 is not set
-# CONFIG_HZ_256 is not set
-# CONFIG_HZ_1000 is not set
-# CONFIG_HZ_1024 is not set
-CONFIG_SYS_SUPPORTS_ARBIT_HZ=y
-CONFIG_HZ=100
-CONFIG_PREEMPT_NONE=y
-# CONFIG_PREEMPT_VOLUNTARY is not set
-# CONFIG_PREEMPT is not set
-# CONFIG_KEXEC is not set
-# CONFIG_SECCOMP is not set
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-CONFIG_CONSTRUCTORS=y
-
-#
-# General setup
-#
-CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
-# CONFIG_LOCALVERSION_AUTO is not set
-CONFIG_HAVE_KERNEL_GZIP=y
-CONFIG_HAVE_KERNEL_BZIP2=y
-CONFIG_HAVE_KERNEL_LZMA=y
-CONFIG_HAVE_KERNEL_LZO=y
-# CONFIG_KERNEL_GZIP is not set
-# CONFIG_KERNEL_BZIP2 is not set
-CONFIG_KERNEL_LZMA=y
-# CONFIG_KERNEL_LZO is not set
-# CONFIG_SWAP is not set
-CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
-CONFIG_POSIX_MQUEUE=y
-CONFIG_POSIX_MQUEUE_SYSCTL=y
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_AUDIT is not set
-
-#
-# RCU Subsystem
-#
-CONFIG_TREE_RCU=y
-# CONFIG_TREE_PREEMPT_RCU is not set
-# CONFIG_TINY_RCU is not set
-# CONFIG_RCU_TRACE is not set
-CONFIG_RCU_FANOUT=32
-# CONFIG_RCU_FANOUT_EXACT is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_IKCONFIG is not set
-CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_GROUP_SCHED is not set
-# CONFIG_CGROUPS is not set
-# CONFIG_SYSFS_DEPRECATED_V2 is not set
-# CONFIG_RELAY is not set
-# CONFIG_NAMESPACES is not set
-# CONFIG_BLK_DEV_INITRD is not set
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
-CONFIG_ANON_INODES=y
-CONFIG_EMBEDDED=y
-CONFIG_SYSCTL_SYSCALL=y
-# CONFIG_KALLSYMS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-# CONFIG_BUG is not set
-# CONFIG_ELF_CORE is not set
-# CONFIG_PCSPKR_PLATFORM is not set
-CONFIG_BASE_FULL=y
-# CONFIG_FUTEX is not set
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-# CONFIG_AIO is not set
-
-#
-# Kernel Performance Events And Counters
-#
-# CONFIG_VM_EVENT_COUNTERS is not set
-# CONFIG_COMPAT_BRK is not set
-CONFIG_SLAB=y
-# CONFIG_SLUB is not set
-# CONFIG_SLOB is not set
-# CONFIG_PROFILING is not set
-CONFIG_HAVE_OPROFILE=y
-
-#
-# GCOV-based kernel profiling
-#
-# CONFIG_SLOW_WORK is not set
-CONFIG_HAVE_GENERIC_DMA_COHERENT=y
-CONFIG_SLABINFO=y
-CONFIG_BASE_SMALL=0
-CONFIG_MODULES=y
-# CONFIG_MODULE_FORCE_LOAD is not set
-CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_BLOCK=y
-# CONFIG_LBDAF is not set
-# CONFIG_BLK_DEV_BSG is not set
-# CONFIG_BLK_DEV_INTEGRITY is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_DEADLINE=y
-# CONFIG_IOSCHED_CFQ is not set
-CONFIG_DEFAULT_DEADLINE=y
-# CONFIG_DEFAULT_CFQ is not set
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="deadline"
-# CONFIG_INLINE_SPIN_TRYLOCK is not set
-# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
-# CONFIG_INLINE_SPIN_LOCK is not set
-# CONFIG_INLINE_SPIN_LOCK_BH is not set
-# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
-# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
-CONFIG_INLINE_SPIN_UNLOCK=y
-# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
-CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
-# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
-# CONFIG_INLINE_READ_TRYLOCK is not set
-# CONFIG_INLINE_READ_LOCK is not set
-# CONFIG_INLINE_READ_LOCK_BH is not set
-# CONFIG_INLINE_READ_LOCK_IRQ is not set
-# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
-CONFIG_INLINE_READ_UNLOCK=y
-# CONFIG_INLINE_READ_UNLOCK_BH is not set
-CONFIG_INLINE_READ_UNLOCK_IRQ=y
-# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
-# CONFIG_INLINE_WRITE_TRYLOCK is not set
-# CONFIG_INLINE_WRITE_LOCK is not set
-# CONFIG_INLINE_WRITE_LOCK_BH is not set
-# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
-# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
-CONFIG_INLINE_WRITE_UNLOCK=y
-# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
-CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
-# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
-# CONFIG_MUTEX_SPIN_ON_OWNER is not set
-# CONFIG_FREEZER is not set
-
-#
-# Bus options (PCI, PCMCIA, EISA, ISA, TC)
-#
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-CONFIG_MMU=y
-# CONFIG_PCCARD is not set
-
-#
-# Executable file formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_HAVE_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-CONFIG_TRAD_SIGNALS=y
-
-#
-# Power management options
-#
-CONFIG_ARCH_HIBERNATION_POSSIBLE=y
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
-# CONFIG_PM is not set
-CONFIG_NET=y
-
-#
-# Networking options
-#
-CONFIG_PACKET=y
-CONFIG_PACKET_MMAP=y
-CONFIG_UNIX=y
-# CONFIG_NET_KEY is not set
-CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
-# CONFIG_IP_PNP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-CONFIG_SYN_COOKIES=y
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
-# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
-# CONFIG_INET_XFRM_MODE_TUNNEL is not set
-# CONFIG_INET_XFRM_MODE_BEET is not set
-CONFIG_INET_LRO=y
-# CONFIG_INET_DIAG is not set
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
-# CONFIG_IPV6 is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_RDS is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_NET_DSA is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_PHONET is not set
-# CONFIG_IEEE802154 is not set
-# CONFIG_NET_SCHED is not set
-# CONFIG_DCB is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_CAN is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
-CONFIG_WIRELESS=y
-# CONFIG_CFG80211 is not set
-# CONFIG_LIB80211 is not set
-
-#
-# CFG80211 needs to be enabled for MAC80211
-#
-# CONFIG_WIMAX is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_DEVTMPFS=y
-CONFIG_DEVTMPFS_MOUNT=y
-# CONFIG_STANDALONE is not set
-# CONFIG_PREVENT_FIRMWARE_BUILD is not set
-# CONFIG_FW_LOADER is not set
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
-CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_TESTS is not set
-# CONFIG_MTD_CONCAT is not set
-CONFIG_MTD_PARTITIONS=y
-CONFIG_MTD_ROOTFS_ROOT_DEV=y
-# CONFIG_MTD_REDBOOT_PARTS is not set
-# CONFIG_MTD_CMDLINE_PARTS is not set
-CONFIG_MTD_AR7_PARTS=y
-
-#
-# User Modules And Translation Layers
-#
-CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLKDEVS=y
-CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-# CONFIG_MTD_OOPS is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
-CONFIG_MTD_CFI=y
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_GEN_PROBE=y
-# CONFIG_MTD_CFI_ADV_OPTIONS is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
-# CONFIG_MTD_CFI_INTELEXT is not set
-CONFIG_MTD_CFI_AMDSTD=y
-# CONFIG_MTD_CFI_STAA is not set
-CONFIG_MTD_CFI_UTIL=y
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-
-#
-# Mapping drivers for chip access
-#
-CONFIG_MTD_COMPLEX_MAPPINGS=y
-CONFIG_MTD_PHYSMAP=y
-# CONFIG_MTD_PHYSMAP_COMPAT is not set
-# CONFIG_MTD_GPIO_ADDR is not set
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
-# CONFIG_MTD_NAND is not set
-# CONFIG_MTD_ONENAND is not set
-
-#
-# LPDDR flash memory drivers
-#
-# CONFIG_MTD_LPDDR is not set
-
-#
-# UBI - Unsorted block images
-#
-# CONFIG_MTD_UBI is not set
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_COW_COMMON is not set
-# CONFIG_BLK_DEV_LOOP is not set
-
-#
-# DRBD disabled because PROC_FS, INET or CONNECTOR not selected
-#
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_RAM is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-# CONFIG_BLK_DEV_HD is not set
-# CONFIG_MISC_DEVICES is not set
-CONFIG_HAVE_IDE=y
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
-# CONFIG_SCSI is not set
-# CONFIG_SCSI_DMA is not set
-# CONFIG_SCSI_NETLINK is not set
-# CONFIG_ATA is not set
-# CONFIG_MD is not set
-CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_VETH is not set
-CONFIG_PHYLIB=y
-# CONFIG_SWCONFIG is not set
-
-#
-# MII PHY device drivers
-#
-# CONFIG_MARVELL_PHY is not set
-# CONFIG_DAVICOM_PHY is not set
-# CONFIG_QSEMI_PHY is not set
-# CONFIG_LXT_PHY is not set
-# CONFIG_CICADA_PHY is not set
-# CONFIG_VITESSE_PHY is not set
-# CONFIG_SMSC_PHY is not set
-# CONFIG_BROADCOM_PHY is not set
-# CONFIG_ICPLUS_PHY is not set
-# CONFIG_REALTEK_PHY is not set
-# CONFIG_NATIONAL_PHY is not set
-# CONFIG_STE10XP is not set
-# CONFIG_LSI_ET1011C_PHY is not set
-CONFIG_FIXED_PHY=y
-# CONFIG_MDIO_BITBANG is not set
-CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
-# CONFIG_AX88796 is not set
-# CONFIG_SMC91X is not set
-# CONFIG_DM9000 is not set
-# CONFIG_ETHOC is not set
-# CONFIG_SMSC911X is not set
-# CONFIG_DNET is not set
-# CONFIG_IBM_NEW_EMAC_ZMII is not set
-# CONFIG_IBM_NEW_EMAC_RGMII is not set
-# CONFIG_IBM_NEW_EMAC_TAH is not set
-# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
-# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
-# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
-# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
-# CONFIG_B44 is not set
-# CONFIG_KS8842 is not set
-# CONFIG_KS8851_MLL is not set
-CONFIG_CPMAC=y
-# CONFIG_NETDEV_1000 is not set
-# CONFIG_NETDEV_10000 is not set
-CONFIG_WLAN=y
-# CONFIG_HOSTAP is not set
-
-#
-# Enable WiMAX (Networking options) to see the WiMAX drivers
-#
-# CONFIG_WAN is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_ISDN is not set
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
-# CONFIG_INPUT is not set
-
-#
-# Hardware I/O ports
-#
-# CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-# CONFIG_VT is not set
-# CONFIG_DEVKMEM is not set
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-CONFIG_SERIAL_8250=y
-CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_SERIAL_8250_NR_UARTS=2
-CONFIG_SERIAL_8250_RUNTIME_UARTS=2
-# CONFIG_SERIAL_8250_EXTENDED is not set
-
-#
-# Non-8250 serial port support
-#
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
-# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
-# CONFIG_LEGACY_PTYS is not set
-# CONFIG_IPMI_HANDLER is not set
-# CONFIG_HW_RANDOM is not set
-# CONFIG_R3964 is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
-# CONFIG_I2C is not set
-# CONFIG_SPI is not set
-
-#
-# PPS support
-#
-# CONFIG_PPS is not set
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
-# CONFIG_HWMON is not set
-# CONFIG_THERMAL is not set
-CONFIG_WATCHDOG=y
-# CONFIG_WATCHDOG_NOWAYOUT is not set
-
-#
-# Watchdog Device Drivers
-#
-# CONFIG_SOFT_WATCHDOG is not set
-CONFIG_AR7_WDT=y
-CONFIG_SSB_POSSIBLE=y
-
-#
-# Sonics Silicon Backplane
-#
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_CORE is not set
-# CONFIG_MFD_SM501 is not set
-# CONFIG_HTC_PASIC3 is not set
-# CONFIG_MFD_TMIO is not set
-# CONFIG_REGULATOR is not set
-# CONFIG_MEDIA_SUPPORT is not set
-
-#
-# Graphics support
-#
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
-# CONFIG_FB is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-# CONFIG_SOUND is not set
-# CONFIG_USB_SUPPORT is not set
-# CONFIG_MMC is not set
-# CONFIG_MEMSTICK is not set
-# CONFIG_NEW_LEDS is not set
-# CONFIG_ACCESSIBILITY is not set
-CONFIG_RTC_LIB=y
-# CONFIG_RTC_CLASS is not set
-# CONFIG_DMADEVICES is not set
-# CONFIG_AUXDISPLAY is not set
-# CONFIG_UIO is not set
-
-#
-# TI VLYNQ
-#
-CONFIG_VLYNQ=y
-# CONFIG_STAGING is not set
-
-#
-# File systems
-#
-# CONFIG_EXT2_FS is not set
-# CONFIG_EXT3_FS is not set
-# CONFIG_EXT4_FS is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_BTRFS_FS is not set
-# CONFIG_NILFS2_FS is not set
-# CONFIG_AUFS_FS is not set
-CONFIG_FILE_LOCKING=y
-# CONFIG_FSNOTIFY is not set
-# CONFIG_DNOTIFY is not set
-# CONFIG_INOTIFY is not set
-# CONFIG_INOTIFY_USER is not set
-# CONFIG_QUOTA is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# Caches
-#
-# CONFIG_FSCACHE is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-# CONFIG_MSDOS_FS is not set
-# CONFIG_VFAT_FS is not set
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-# CONFIG_PROC_KCORE is not set
-CONFIG_PROC_SYSCTL=y
-# CONFIG_PROC_PAGE_MONITOR is not set
-CONFIG_SYSFS=y
-CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-# CONFIG_MISC_FILESYSTEMS is not set
-CONFIG_NETWORK_FILESYSTEMS=y
-# CONFIG_NFS_FS is not set
-# CONFIG_NFSD is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-# CONFIG_NLS is not set
-# CONFIG_DLM is not set
-
-#
-# Kernel hacking
-#
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_PRINTK_TIME=y
-# CONFIG_ENABLE_WARN_DEPRECATED is not set
-# CONFIG_ENABLE_MUST_CHECK is not set
-CONFIG_FRAME_WARN=2048
-CONFIG_MAGIC_SYSRQ=y
-# CONFIG_STRIP_ASM_SYMS is not set
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
-# CONFIG_DEBUG_KERNEL is not set
-# CONFIG_DEBUG_MEMORY_INIT is not set
-# CONFIG_RCU_CPU_STALL_DETECTOR is not set
-# CONFIG_SYSCTL_SYSCALL_CHECK is not set
-CONFIG_HAVE_FUNCTION_TRACER=y
-CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
-CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y
-CONFIG_HAVE_DYNAMIC_FTRACE=y
-CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
-CONFIG_TRACING_SUPPORT=y
-# CONFIG_FTRACE is not set
-# CONFIG_SAMPLES is not set
-CONFIG_HAVE_ARCH_KGDB=y
-CONFIG_EARLY_PRINTK=y
-CONFIG_CMDLINE_BOOL=y
-CONFIG_CMDLINE="cpmac.dumb_switch=1"
-# CONFIG_CMDLINE_OVERRIDE is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITYFS is not set
-# CONFIG_DEFAULT_SECURITY_SELINUX is not set
-# CONFIG_DEFAULT_SECURITY_SMACK is not set
-# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
-CONFIG_DEFAULT_SECURITY_DAC=y
-CONFIG_DEFAULT_SECURITY=""
-CONFIG_CRYPTO=y
-
-#
-# Crypto core or helper
-#
-# CONFIG_CRYPTO_MANAGER is not set
-# CONFIG_CRYPTO_MANAGER2 is not set
-# CONFIG_CRYPTO_GF128MUL is not set
-# CONFIG_CRYPTO_NULL is not set
-# CONFIG_CRYPTO_CRYPTD is not set
-# CONFIG_CRYPTO_AUTHENC is not set
-# CONFIG_CRYPTO_TEST is not set
-
-#
-# Authenticated Encryption with Associated Data
-#
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_SEQIV is not set
-
-#
-# Block modes
-#
-# CONFIG_CRYPTO_CBC is not set
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_CTS is not set
-# CONFIG_CRYPTO_ECB is not set
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_PCBC is not set
-# CONFIG_CRYPTO_XTS is not set
-
-#
-# Hash modes
-#
-# CONFIG_CRYPTO_HMAC is not set
-# CONFIG_CRYPTO_XCBC is not set
-# CONFIG_CRYPTO_VMAC is not set
-
-#
-# Digest
-#
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_GHASH is not set
-# CONFIG_CRYPTO_MD4 is not set
-# CONFIG_CRYPTO_MD5 is not set
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_RMD128 is not set
-# CONFIG_CRYPTO_RMD160 is not set
-# CONFIG_CRYPTO_RMD256 is not set
-# CONFIG_CRYPTO_RMD320 is not set
-# CONFIG_CRYPTO_SHA1 is not set
-# CONFIG_CRYPTO_SHA256 is not set
-# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_WP512 is not set
-
-#
-# Ciphers
-#
-# CONFIG_CRYPTO_AES is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_ARC4 is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_DES is not set
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_SALSA20 is not set
-# CONFIG_CRYPTO_SEED is not set
-# CONFIG_CRYPTO_SERPENT is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-
-#
-# Compression
-#
-# CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_ZLIB is not set
-# CONFIG_CRYPTO_LZO is not set
-
-#
-# Random Number Generation
-#
-# CONFIG_CRYPTO_ANSI_CPRNG is not set
-# CONFIG_CRYPTO_HW is not set
-
-#
-# OCF Configuration
-#
-# CONFIG_OCF_OCF is not set
-# CONFIG_BINARY_PRINTF is not set
-
-#
-# Library routines
-#
-CONFIG_GENERIC_FIND_LAST_BIT=y
-# CONFIG_CRC_CCITT is not set
-# CONFIG_CRC16 is not set
-# CONFIG_CRC_T10DIF is not set
-# CONFIG_CRC_ITU_T is not set
-# CONFIG_CRC32 is not set
-# CONFIG_CRC7 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
-CONFIG_NLATTR=y
diff --git a/target/ag241/patches/ar7.patch b/target/ag241/patches/ar7.patch
deleted file mode 100644
index dcaaa2ec7..000000000
--- a/target/ag241/patches/ar7.patch
+++ /dev/null
@@ -1,90 +0,0 @@
-diff -Nur linux-2.6.34.orig/arch/mips/ar7/prom.c linux-2.6.34/arch/mips/ar7/prom.c
---- linux-2.6.34.orig/arch/mips/ar7/prom.c 2010-05-16 23:17:36.000000000 +0200
-+++ linux-2.6.34/arch/mips/ar7/prom.c 2010-05-28 15:52:26.960965976 +0200
-@@ -206,6 +206,14 @@
- if (strstr(arcs_cmdline, "console="))
- return;
-
-+#ifdef CONFIG_KGDB
-+ if (!strstr(prom_getcmdline(), "nokgdb")) {
-+ strcat(prom_getcmdline(), " console=kgdb");
-+ kgdb_enabled = 1;
-+ return;
-+ }
-+#endif
-+
- s = prom_getenv("modetty0");
- if (s) {
- baud = simple_strtoul(s, &p, 10);
-diff -Nur linux-2.6.34.orig/arch/mips/Kconfig linux-2.6.34/arch/mips/Kconfig
---- linux-2.6.34.orig/arch/mips/Kconfig 2010-05-16 23:17:36.000000000 +0200
-+++ linux-2.6.34/arch/mips/Kconfig 2010-05-28 15:52:27.142223192 +0200
-@@ -34,7 +34,6 @@
- select CEVT_R4K
- select CSRC_R4K
- select IRQ_CPU
-- select NO_EXCEPT_FILL
- select SWAP_IO_SPACE
- select SYS_HAS_CPU_MIPS32_R1
- select SYS_HAS_EARLY_PRINTK
-diff -Nur linux-2.6.34.orig/drivers/mtd/ar7part.c linux-2.6.34/drivers/mtd/ar7part.c
---- linux-2.6.34.orig/drivers/mtd/ar7part.c 2010-05-16 23:17:36.000000000 +0200
-+++ linux-2.6.34/drivers/mtd/ar7part.c 2010-05-28 15:52:27.232223555 +0200
-@@ -28,7 +28,7 @@
- #include <linux/bootmem.h>
- #include <linux/magic.h>
-
--#define AR7_PARTS 4
-+#define AR7_PARTS 5
- #define ROOT_OFFSET 0xe0000
-
- #define LOADER_MAGIC1 le32_to_cpu(0xfeedfa42)
-@@ -122,14 +122,19 @@
-
- ar7_parts[2].name = "linux";
- ar7_parts[2].offset = pre_size;
-- ar7_parts[2].size = master->size - pre_size - post_size;
-+ ar7_parts[2].size = master->size - pre_size - post_size - 2*master->erasesize;
- ar7_parts[2].mask_flags = 0;
-
- ar7_parts[3].name = "rootfs";
- ar7_parts[3].offset = root_offset;
-- ar7_parts[3].size = master->size - root_offset - post_size;
-+ ar7_parts[3].size = master->size - root_offset - post_size - 2*master->erasesize;
- ar7_parts[3].mask_flags = 0;
-
-+ ar7_parts[4].name = "cfgfs";
-+ ar7_parts[4].offset = master->size - 2*master->erasesize;
-+ ar7_parts[4].size = 2*master->erasesize;
-+ ar7_parts[4].mask_flags = 0;
-+
- *pparts = ar7_parts;
- return AR7_PARTS;
- }
-diff -Nur linux-2.6.34.orig/drivers/mtd/maps/physmap.c linux-2.6.34/drivers/mtd/maps/physmap.c
---- linux-2.6.34.orig/drivers/mtd/maps/physmap.c 2010-05-16 23:17:36.000000000 +0200
-+++ linux-2.6.34/drivers/mtd/maps/physmap.c 2010-05-28 15:52:27.281073432 +0200
-@@ -79,7 +79,7 @@
- "map_rom",
- NULL };
- #ifdef CONFIG_MTD_PARTITIONS
--static const char *part_probe_types[] = { "cmdlinepart", "RedBoot", NULL };
-+static const char *part_probe_types[] = { "cmdlinepart", "RedBoot", "ar7part", NULL };
- #endif
-
- static int physmap_flash_probe(struct platform_device *dev)
-diff -Nur linux-2.6.34.orig/drivers/serial/8250.c linux-2.6.34/drivers/serial/8250.c
---- linux-2.6.34.orig/drivers/serial/8250.c 2010-05-16 23:17:36.000000000 +0200
-+++ linux-2.6.34/drivers/serial/8250.c 2010-05-28 15:52:27.330968429 +0200
-@@ -2746,7 +2746,11 @@
- {
- struct uart_8250_port *up = (struct uart_8250_port *)port;
-
-+#ifdef CONFIG_AR7
-+ wait_for_xmitr(up, BOTH_EMPTY);
-+#else
- wait_for_xmitr(up, UART_LSR_THRE);
-+#endif
- serial_out(up, UART_TX, ch);
- }
-
diff --git a/target/ag241/target.mk b/target/ag241/target.mk
deleted file mode 100644
index 95a66a072..000000000
--- a/target/ag241/target.mk
+++ /dev/null
@@ -1,5 +0,0 @@
-include $(TOPDIR)/mk/kernel-ver.mk
-ARCH:= mips
-CPU_ARCH:= mipsel
-TARGET_OPTIMIZATION:= -Os -pipe
-TARGET_CFLAGS_ARCH:= -march=mips32
diff --git a/target/ag241/tools/addpattern/Makefile b/target/ag241/tools/addpattern/Makefile
deleted file mode 100644
index 3ac1884fa..000000000
--- a/target/ag241/tools/addpattern/Makefile
+++ /dev/null
@@ -1,4 +0,0 @@
-include $(TOPDIR)/rules.mk
-
-all:
- $(HOSTCC) ${HOSTCFLAGS} -o ${STAGING_TOOLS}/bin/addpattern addpattern.c
diff --git a/target/ag241/tools/addpattern/addpattern.c b/target/ag241/tools/addpattern/addpattern.c
deleted file mode 100644
index 6f2a036c0..000000000
--- a/target/ag241/tools/addpattern/addpattern.c
+++ /dev/null
@@ -1,255 +0,0 @@
-/*
- * Copyright (C) 2004 Manuel Novoa III <mjn3@codepoet.org>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
- * General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- */
-
-/* July 29, 2004
- *
- * This is a hacked replacement for the 'addpattern' utility used to
- * create wrt54g .bin firmware files. It isn't pretty, but it does
- * the job for me.
- *
- * Extensions:
- * -v allows setting the version string on the command line.
- * -{0|1} sets the (currently ignored) hw_ver flag in the header
- * to 0 or 1 respectively.
- */
-
-/* January 12, 2005
- *
- * Modified by rodent at rodent dot za dot net
- * Support added for the new WRT54G v2.2 and WRT54GS v1.1 "flags"
- * Without the flags set to 0x7, the above units will refuse to flash.
- *
- * Extensions:
- * -{0|1|2} sets {0|1} sets hw_ver flag to 0/1. {2} sets hw_ver to 1
- * and adds the new hardware "flags" for the v2.2/v1.1 units
-*/
-
-/* January 1, 2007
- *
- * Modified by juan.i.gonzalez at subdown dot net
- * Support added for the AG241v2 and similar
- *
- * Extensions:
- * -r #.# adds revision hardware flags. AG241v2 and similar.
- *
- * AG241V2 firmware sets the hw_ver to 0x44.
- *
- * Example: -r 2.0
- *
- * Convert 2.0 to 20 to be an integer, and add 0x30 to skip special ASCII
- * #define HW_Version ((HW_REV * 10) + 0x30) -> from cyutils.h
-*/
-
-#include <stdio.h>
-#include <stdlib.h>
-#include <string.h>
-#include <time.h>
-#include <unistd.h>
-#include <sys/stat.h>
-
-/**********************************************************************/
-
-#define CODE_ID "U2ND" /* from code_pattern.h */
-#define CODE_PATTERN "W54S" /* from code_pattern.h */
-#define PBOT_PATTERN "PBOT"
-
-#define CYBERTAN_VERSION "v3.37.2" /* from cyutils.h */
-
-/* WRT54G v2.2 and WRT54GS v1.1 "flags" (from 3.37.32 firmware cyutils.h) */
-#define SUPPORT_4712_CHIP 0x0001
-#define SUPPORT_INTEL_FLASH 0x0002
-#define SUPPORT_5325E_SWITCH 0x0004
-
-struct code_header { /* from cyutils.h */
- char magic[4];
- char res1[4]; /* for extra magic */
- char fwdate[3];
- char fwvern[3];
- char id[4]; /* U2ND */
- char hw_ver; /* 0: for 4702, 1: for 4712 -- new in 2.04.3 */
- char unused;
- unsigned char flags[2]; /* SUPPORT_ flags new for 3.37.2 (WRT54G v2.2 and WRT54GS v1.1) */
- unsigned char res2[10];
-} ;
-
-/**********************************************************************/
-
-void usage(void) __attribute__ (( __noreturn__ ));
-
-void usage(void)
-{
- fprintf(stderr, "Usage: addpattern [-i trxfile] [-o binfile] [-p pattern] [-g] [-b] [-v v#.#.#] [-r #.#] [-{0|1|2|4}] -h\n");
- exit(EXIT_FAILURE);
-}
-
-int main(int argc, char **argv)
-{
- char buf[1024]; /* keep this at 1k or adjust garbage calc below */
- struct code_header *hdr;
- FILE *in = stdin;
- FILE *out = stdout;
- char *ifn = NULL;
- char *ofn = NULL;
- char *pattern = CODE_PATTERN;
- char *pbotpat = PBOT_PATTERN;
- char *version = CYBERTAN_VERSION;
- int gflag = 0;
- int pbotflag = 0;
- int c;
- int v0, v1, v2;
- size_t off, n;
- time_t t;
- struct tm *ptm;
-
- fprintf(stderr, "mjn3's addpattern replacement - v0.81\n");
-
- hdr = (struct code_header *) buf;
- memset(hdr, 0, sizeof(struct code_header));
-
- while ((c = getopt(argc, argv, "i:o:p:gbv:0124hr:")) != -1) {
- switch (c) {
- case 'i':
- ifn = optarg;
- break;
- case 'o':
- ofn = optarg;
- break;
- case 'p':
- pattern = optarg;
- break;
- case 'g':
- gflag = 1;
- break;
- case 'b':
- pbotflag = 1;
- break;
- case 'v': /* extension to allow setting version */
- version = optarg;
- break;
- case '0':
- hdr->hw_ver = 0;
- break;
- case '1':
- hdr->hw_ver = 1;
- break;
- case '2': /* new 54G v2.2 and 54GS v1.1 flags */
- hdr->hw_ver = 1;
- hdr->flags[0] |= SUPPORT_4712_CHIP;
- hdr->flags[0] |= SUPPORT_INTEL_FLASH;
- hdr->flags[0] |= SUPPORT_5325E_SWITCH;
- break;
- case '4':
- /* V4 firmware sets the flags to 0x1f */
- hdr->hw_ver = 0;
- hdr->flags[0] = 0x1f;
- break;
- case 'r':
- hdr->hw_ver = (char)(atof(optarg)*10)+0x30;
- break;
-
- case 'h':
- default:
- usage();
- }
- }
-
- if (optind != argc || optind == 1) {
- fprintf(stderr, "illegal arg \"%s\"\n", argv[optind]);
- usage();
- }
-
- if (strlen(pattern) != 4) {
- fprintf(stderr, "illegal pattern \"%s\": length != 4\n", pattern);
- usage();
- }
-
- if (ifn && !(in = fopen(ifn, "r"))) {
- fprintf(stderr, "can not open \"%s\" for reading\n", ifn);
- usage();
- }
-
- if (ofn && !(out = fopen(ofn, "w"))) {
- fprintf(stderr, "can not open \"%s\" for writing\n", ofn);
- usage();
- }
-
- if (time(&t) == (time_t)(-1)) {
- fprintf(stderr, "time call failed\n");
- return EXIT_FAILURE;
- }
-
- ptm = localtime(&t);
-
- if (3 != sscanf(version, "v%d.%d.%d", &v0, &v1, &v2)) {
- fprintf(stderr, "bad version string \"%s\"\n", version);
- return EXIT_FAILURE;
- }
-
- memcpy(&hdr->magic, pattern, 4);
- if (pbotflag)
- memcpy(&hdr->res1, pbotpat, 4);
- hdr->fwdate[0] = ptm->tm_year % 100;
- hdr->fwdate[1] = ptm->tm_mon + 1;
- hdr->fwdate[2] = ptm->tm_mday;
- hdr->fwvern[0] = v0;
- hdr->fwvern[1] = v1;
- hdr->fwvern[2] = v2;
- memcpy(&hdr->id, CODE_ID, strlen(CODE_ID));
-
- off = sizeof(struct code_header);
-
- fprintf(stderr, "writing firmware v%d.%d.%d on %d/%d/%d (y/m/d)\n",
- v0, v1, v2,
- hdr->fwdate[0], hdr->fwdate[1], hdr->fwdate[2]);
-
-
- while ((n = fread(buf + off, 1, sizeof(buf)-off, in) + off) > 0) {
- off = 0;
- if (n < sizeof(buf)) {
- if (ferror(in)) {
- FREAD_ERROR:
- fprintf(stderr, "fread error\n");
- return EXIT_FAILURE;
- }
- if (gflag) {
- gflag = sizeof(buf) - n;
- memset(buf + n, 0xff, gflag);
- fprintf(stderr, "adding %d bytes of garbage\n", gflag);
- n = sizeof(buf);
- }
- }
- if (!fwrite(buf, n, 1, out)) {
- FWRITE_ERROR:
- fprintf(stderr, "fwrite error\n");
- return EXIT_FAILURE;
- }
- }
-
- if (ferror(in)) {
- goto FREAD_ERROR;
- }
-
- if (fflush(out)) {
- goto FWRITE_ERROR;
- }
-
- fclose(in);
- fclose(out);
-
- return EXIT_SUCCESS;
-}
diff --git a/target/ag241/tools/rules.mk b/target/ag241/tools/rules.mk
deleted file mode 100644
index a6a3684ac..000000000
--- a/target/ag241/tools/rules.mk
+++ /dev/null
@@ -1,7 +0,0 @@
-# This file is part of the OpenADK project. OpenADK is copyrighted
-# material, please see the LICENCE file in the top-level directory.
-
-WRKDIR_BASE= ${TOOLS_BUILD_DIR}
-WRKDIR= ${WRKDIR_BASE}
-
-include ${TOPDIR}/mk/buildhlp.mk
diff --git a/target/ag241/tools/srec2bin/Makefile b/target/ag241/tools/srec2bin/Makefile
deleted file mode 100644
index dd6a285fd..000000000
--- a/target/ag241/tools/srec2bin/Makefile
+++ /dev/null
@@ -1,4 +0,0 @@
-include $(TOPDIR)/rules.mk
-
-all:
- $(HOSTCC) ${HOSTCFLAGS} -o ${STAGING_TOOLS}/bin/srec2bin srec2bin.c
diff --git a/target/ag241/tools/srec2bin/srec2bin.c b/target/ag241/tools/srec2bin/srec2bin.c
deleted file mode 100644
index 1cffbaed9..000000000
--- a/target/ag241/tools/srec2bin/srec2bin.c
+++ /dev/null
@@ -1,524 +0,0 @@
-#include <stdio.h>
-#include <ctype.h>
-#include <string.h>
-
-//Rev 0.1 Original
-// 8 Jan 2001 MJH Added code to write data to Binary file
-// note: outputfile is name.bin, where name is first part
-// of input file. ie tmp.rec -> tmp.bin
-//
-// srec2bin <input SREC file> <Output Binary File> <If Present, Big Endian>
-//
-// TAG
-// bit32u TAG_BIG = 0xDEADBE42;
-// bit32u TAG_LITTLE = 0xFEEDFA42;
-//
-// File Structure
-//
-// TAG : 32 Bits
-// [DATA RECORDS]
-//
-// Data Records Structure
-//
-// LENGTH : 32 Bits <- Length of DATA, excludes ADDRESS and CHECKSUM
-// ADDRESS : 32 Bits
-// DATA : 8 Bits * LENGTH
-// CHECKSUM: 32 Bits <- 0 - (Sum of Length --> End of Data)
-//
-// Note : If Length == 0, Address will be Program Start
-//
-//
-//
-//
-//
-
-#define MajRevNum 0
-#define MinRevNum 2
-
-
-#define EndianSwitch(x) ((x >> 24) | (x << 24) | ((x << 8) & (0x00FF0000)) | ((x >> 8) & (0x0000FF00)) )
-
-typedef unsigned char bit8u;
-typedef unsigned int bit32u;
-typedef int bit32;
-
-#define FALSE 0
-#define TRUE (!FALSE)
-
-
-bit32u CheckSum;
-int RecStart;
-int debug;
-int verbose;
-
-FILE *OpenOutputFile( char *Name );
-FILE *fOut;
-bit32u RecLength=0;
-
-bit32u AddressCurrent;
-
-bit32u gh(char *cp,int nibs);
-
-int BigEndian;
-
-int inputline;
-
-// char buf[16*1024];
-
-char buffer[2048];
-char *cur_ptr;
-int cur_line=0;
-int cur_len=0;
-
-int s1s2s3_total=0;
-
-bit32u PBVal;
-int PBValid;
-bit32u PBAdr;
-
-
-void dumpfTell(char *s, bit32u Value)
-{
- int Length;
- Length = (int) RecLength;
- if (debug)
- printf("[%s ] ftell()[0x%08lX] Length[0x%4X] Length[%4d] Value[0x%08x]\n",
- s, ftell(fOut), Length, Length, Value);
-}
-
-void DispHex(bit32u Hex)
-{
-// printf("%X", Hex);
-}
-
-void WaitDisplay(void)
-{
- static int Count=0;
- static int Index=0;
- char iline[]={"-\\|/"};
-
- Count++;
- if ((Count % 32)==0)
- {
- if (verbose)
- printf("%c%c",iline[Index++],8);
- Index &= 3;
- }
-}
-
-
-void binOut32 ( bit32u Data )
-{
-// On UNIX machine all 32bit writes need ENDIAN switched
-// Data = EndianSwitch(Data);
-// fwrite( &Data, sizeof(bit32u), 1, fOut);
-
- char sdat[4];
- int i;
-
- for(i=0;i<4;i++)
- sdat[i]=(char)(Data>>(i*8));
- fwrite( sdat, 1, 4, fOut);
- dumpfTell("Out32" , Data);
-}
-
-// Only update RecLength on Byte Writes
-// All 32 bit writes will be for Length etc
-
-void binOut8 ( bit8u Data )
-{
- int n;
- dumpfTell("B4Data" , (bit32u) (Data & 0xFF) );
- n = fwrite( &Data, sizeof(bit8u), 1, fOut);
- if (n != 1)
- printf("Error in writing %X for Address 0x%8X\n", Data, AddressCurrent);
- RecLength += 1;
-}
-
-// Currently ONLY used for outputting Program Start
-
-void binRecStart(bit32u Address)
-{
- RecLength = 0;
- CheckSum = Address;
- RecStart = TRUE;
-
- if (debug)
- printf("[RecStart] CheckSum[0x%08X] Length[%4d] Address[0x%08X]\n",
- CheckSum, RecLength, Address);
-
-
- dumpfTell("RecLength", RecLength);
- binOut32( RecLength );
- dumpfTell("Address", Address);
- binOut32( Address );
-}
-
-void binRecEnd(void)
-{
- long RecEnd;
-
- if (!RecStart) // if no record started, do not end it
- {
- return;
- }
-
- RecStart = FALSE;
-
-
- RecEnd = ftell(fOut); // Save Current position
-
- if (debug)
- printf("[RecEnd ] CheckSum[0x%08X] Length[%4d] Length[0x%X] RecEnd[0x%08lX]\n",
- CheckSum, RecLength, RecLength, RecEnd);
-
- fseek( fOut, -((long) RecLength), SEEK_CUR); // move back Start Of Data
-
- dumpfTell("Data ", -1);
-
- fseek( fOut, -4, SEEK_CUR); // move back Start Of Address
-
- dumpfTell("Address ", -1);
-
- fseek( fOut, -4, SEEK_CUR); // move back Start Of Length
-
- dumpfTell("Length ", -1);
-
- binOut32( RecLength );
-
- fseek( fOut, RecEnd, SEEK_SET); // move to end of Record
-
- CheckSum += RecLength;
-
- CheckSum = ~CheckSum + 1; // Two's complement
-
- binOut32( CheckSum );
-
- if (verbose)
- printf("[Created Record of %d Bytes with CheckSum [0x%8X]\n", RecLength, CheckSum);
-}
-
-void binRecOutProgramStart(bit32u Address)
-{
- if (Address != (AddressCurrent+1))
- {
- binRecEnd();
- binRecStart(Address);
- }
- AddressCurrent = Address;
-}
-void binRecOutByte(bit32u Address, bit8u Data)
-{
- // If Address is one after Current Address, output Byte
- // If not, close out last record, update Length, write checksum
- // Then Start New Record, updating Current Address
-
- if (Address != (AddressCurrent+1))
- {
- binRecEnd();
- binRecStart(Address);
- }
- AddressCurrent = Address;
- CheckSum += Data;
- binOut8( Data );
-}
-
-//=============================================================================
-// SUPPORT FUNCTIONS
-//=============================================================================
-int readline(FILE *fil,char *buf,int len)
-{
- int rlen;
-
- rlen=0;
- if (len==0) return(0);
- while(1)
- {
- if (cur_len==0)
- {
- cur_len=fread(buffer, 1, sizeof(buffer), fil);
- if (cur_len==0)
- {
- if (rlen)
- {
- *buf=0;
- return(rlen);
- }
- return(-1);
- }
- cur_ptr=buffer;
- }
- if (cur_len)
- {
- if (*cur_ptr=='\n')
- {
- *buf=0;
- cur_ptr++;
- cur_len--;
- return(rlen);
- }
- else
- {
- if ((len>1)&&(*cur_ptr!='\r'))
- {
- *buf++=*cur_ptr++;
- len--;
- }
- else
- cur_ptr++;
-
- rlen++;
- cur_len--;
- }
- }
- else
- {
- *buf=0;
- cur_ptr++;
- cur_len--;
- return(rlen);
- }
- }
-}
-
-
-int SRLerrorout(char *c1,char *c2)
-{
- printf("\nERROR: %s - '%s'.",c1,c2);
- return(FALSE);
-}
-
-
-int checksum(char *cp,int count)
-{
- char *scp;
- int cksum;
- int dum;
-
- scp=cp;
- while(*scp)
- {
- if (!isxdigit(*scp++))
- return(SRLerrorout("Invalid hex digits",cp));
- }
- scp=cp;
-
- cksum=count;
-
- while(count)
- {
- cksum += gh(scp,2);
- if (count == 2)
- dum = ~cksum;
- scp += 2;
- count--;
- }
- cksum&=0x0ff;
- // printf("\nCk:%02x",cksum);
- return(cksum==0x0ff);
-}
-
-bit32u gh(char *cp,int nibs)
-{
- int i;
- bit32u j;
-
- j=0;
-
- for(i=0;i<nibs;i++)
- {
- j<<=4;
- if ((*cp>='a')&&(*cp<='z')) *cp &= 0x5f;
- if ((*cp>='0')&&(*cp<='9'))
- j += (*cp-0x30);
- else
- if ((*cp>='A')&&(*cp<='F'))
- j += (*cp-0x37);
- else
- SRLerrorout("Bad Hex char", cp);
- cp++;
- }
- return(j);
-}
-
-
-//=============================================================================
-// PROCESS SREC LINE
-//=============================================================================
-
-int srecLine(char *pSrecLine)
-{
- char *scp,ch;
- int itmp,count,dat;
- bit32u adr;
- static bit32u RecordCounter=0;
-
- cur_line++;
- scp=pSrecLine;
-
- if (*pSrecLine!='S')
- return(SRLerrorout("Not an Srecord file",scp));
- pSrecLine++;
- if (strlen(pSrecLine)<4)
- return(SRLerrorout("Srecord too short",scp));
-
- ch=*pSrecLine++;
-
- count=gh(pSrecLine,2);
-
- pSrecLine += 2;
-
- // if(debug)
- // printf("count %d, strlen(pSrecLine) = %d, pSrecLine =[%s]\n", count, strlen(pSrecLine), pSrecLine);
- RecordCounter++;
- DispHex(RecordCounter);
-
- if ((count*2) != strlen(pSrecLine)) return(SRLerrorout("Count field larger than record",scp));
-
- if (!checksum(pSrecLine, count)) return(SRLerrorout("Bad Checksum",scp));
-
- switch(ch)
- {
- case '0': if (count<3) return(SRLerrorout("Invalid Srecord count field",scp));
- itmp=gh(pSrecLine,4); pSrecLine+=4; count-=2;
- if (itmp) return(SRLerrorout("Srecord 1 address not zero",scp));
- break;
- case '1': if (count<3) return(SRLerrorout("Invalid Srecord count field",scp));
- return(SRLerrorout("Srecord Not valid for MIPS",scp));
- break;
- case '2': if (count<4) return(SRLerrorout("Invalid Srecord count field",scp));
- return(SRLerrorout("Srecord Not valid for MIPS",scp));
- break;
- case '3': if (count<5) return(SRLerrorout("Invalid Srecord count field",scp));
- adr=gh(pSrecLine,8); pSrecLine+=8; count-=4;
- count--;
- while(count)
- {
- dat=gh(pSrecLine,2); pSrecLine+=2; count--;
- binRecOutByte(adr, (char) (dat & 0xFF));
- adr++;
- }
- s1s2s3_total++;
- break;
- case '4': return(SRLerrorout("Invalid Srecord type",scp));
- break;
- case '5': if (count<3) return(SRLerrorout("Invalid Srecord count field",scp));
- itmp=gh(pSrecLine,4); pSrecLine+=4; count-=2;
- if (itmp|=s1s2s3_total) return(SRLerrorout("Incorrect number of S3 Record processed",scp));
- break;
- case '6': return(SRLerrorout("Invalid Srecord type",scp));
- break;
- case '7': // PROGRAM START
- if (count<5) return(SRLerrorout("Invalid Srecord count field",scp));
- adr=gh(pSrecLine,8); pSrecLine+=8; count-=4;
- if (count!=1) return(SRLerrorout("Invalid Srecord count field",scp));
- binRecOutProgramStart(adr);
- break;
- case '8': if (count<4) return(SRLerrorout("Invalid Srecord count field",scp));
- return(SRLerrorout("Srecord Not valid for MIPS",scp));
- break;
- case '9': if (count<3) return(SRLerrorout("Invalid Srecord count field",scp));
- return(SRLerrorout("Srecord Not valid for MIPS",scp));
- break;
- default:
- break;
- }
- return(TRUE);
-}
-
-
-//=============================================================================
-// MAIN LOGIC, READS IN LINE AND OUTPUTS BINARY
-//=============================================================================
-
-int srec2bin(int argc,char *argv[],int verbose)
-{
- int i,rlen,sts;
- FILE *fp;
- char ac;
- char buff[256];
- bit32u TAG_BIG = 0xDEADBE42;
- bit32u TAG_LITTLE = 0xFEEDFA42;
-
- bit32u Tag;
-
-
- if(argc < 3)
- {
- printf("\nError: <srec2bin <srec input file> <bin output file>\n\n");
- return(0);
- }
-
- if (argc > 3) BigEndian=TRUE; else BigEndian=FALSE;
-
- if (BigEndian)
- Tag = TAG_BIG;
- else
- Tag = TAG_LITTLE;
-
- if (verbose)
- printf("\nEndian: %s, Tag is 0x%8X\n",(BigEndian)?"BIG":"LITTLE", Tag);
-
- fp = fopen(argv[1],"rt");
-
- if (fp==NULL)
- {
- printf("\nError: Opening input file, %s.", argv[1]);
- return(0);
- }
-
- fOut = fopen( argv[2], "wb");
-
- if (fOut==NULL)
- {
- printf("\nError: Opening Output file, %s.", argv[2]);
- if(fp) fclose(fp);
- return(0);
- }
-
- RecStart = FALSE;
-
- AddressCurrent = 0xFFFFFFFFL;
-
- // Setup Tag
-
- dumpfTell("Tag", Tag);
-
- binOut32(Tag);
-
-
- inputline=0;
- sts=TRUE;
-
- rlen = readline(fp,buff,sizeof buff);
-
- while( (sts) && (rlen != -1))
- {
- if (strlen(buff))
- {
- sts &= srecLine(buff);
- WaitDisplay();
- }
- rlen = readline(fp,buff,sizeof buff);
- }
-
-
- // printf("PC: 0x%08X, Length 0x%08X, Tag 0x%08X\n", ProgramStart, RecLength, TAG_LITTLE);
-
- binRecEnd();
-
- if(fp) fclose(fp);
- if(fOut) fclose(fOut);
-
- return(1);
-}
-
-main(int argc, char *argv[])
-{
- debug = TRUE;
- debug = FALSE;
- verbose = FALSE;
- srec2bin(argc,argv,verbose);
- return 0;
-}
-
diff --git a/target/ag241/uclibc.config b/target/ag241/uclibc.config
deleted file mode 100644
index 4ec29e966..000000000
--- a/target/ag241/uclibc.config
+++ /dev/null
@@ -1,233 +0,0 @@
-#
-# Automatically generated make config: don't edit
-# Version: 0.9.30.1
-# Wed Jan 13 08:23:16 2010
-#
-# TARGET_alpha is not set
-# TARGET_arm is not set
-# TARGET_avr32 is not set
-# TARGET_bfin is not set
-# TARGET_cris is not set
-# TARGET_e1 is not set
-# TARGET_frv is not set
-# TARGET_h8300 is not set
-# TARGET_hppa is not set
-# TARGET_i386 is not set
-# TARGET_i960 is not set
-# TARGET_ia64 is not set
-# TARGET_m68k is not set
-# TARGET_microblaze is not set
-TARGET_mips=y
-# TARGET_nios is not set
-# TARGET_nios2 is not set
-# TARGET_powerpc is not set
-# TARGET_sh is not set
-# TARGET_sh64 is not set
-# TARGET_sparc is not set
-# TARGET_v850 is not set
-# TARGET_vax is not set
-# TARGET_x86_64 is not set
-# TARGET_xtensa is not set
-
-#
-# Target Architecture Features and Options
-#
-TARGET_ARCH="mips"
-FORCE_OPTIONS_FOR_ARCH=y
-ARCH_CFLAGS="-mno-split-addresses"
-CONFIG_MIPS_O32_ABI=y
-# CONFIG_MIPS_N32_ABI is not set
-# CONFIG_MIPS_N64_ABI is not set
-# CONFIG_MIPS_ISA_1 is not set
-# CONFIG_MIPS_ISA_2 is not set
-# CONFIG_MIPS_ISA_3 is not set
-# CONFIG_MIPS_ISA_4 is not set
-CONFIG_MIPS_ISA_MIPS32=y
-# CONFIG_MIPS_ISA_MIPS32R2 is not set
-# CONFIG_MIPS_ISA_MIPS64 is not set
-TARGET_SUBARCH=""
-
-#
-# Using ELF file format
-#
-ARCH_ANY_ENDIAN=y
-ARCH_LITTLE_ENDIAN=y
-# ARCH_WANTS_BIG_ENDIAN is not set
-ARCH_WANTS_LITTLE_ENDIAN=y
-ARCH_HAS_MMU=y
-ARCH_USE_MMU=y
-UCLIBC_HAS_FLOATS=y
-UCLIBC_HAS_FPU=y
-DO_C99_MATH=y
-UCLIBC_HAS_FENV=y
-KERNEL_HEADERS=""
-HAVE_DOT_CONFIG=y
-
-#
-# General Library Settings
-#
-# HAVE_NO_PIC is not set
-DOPIC=y
-# ARCH_HAS_NO_SHARED is not set
-# ARCH_HAS_NO_LDSO is not set
-HAVE_SHARED=y
-# FORCE_SHAREABLE_TEXT_SEGMENTS is not set
-LDSO_LDD_SUPPORT=y
-LDSO_CACHE_SUPPORT=y
-# LDSO_PRELOAD_FILE_SUPPORT is not set
-LDSO_BASE_FILENAME="ld.so"
-# UCLIBC_STATIC_LDCONFIG is not set
-LDSO_RUNPATH=y
-UCLIBC_CTOR_DTOR=y
-# LDSO_GNU_HASH_SUPPORT is not set
-# HAS_NO_THREADS is not set
-UCLIBC_HAS_THREADS=y
-PTHREADS_DEBUG_SUPPORT=y
-LINUXTHREADS_OLD=y
-UCLIBC_HAS_SYSLOG=y
-UCLIBC_HAS_LFS=y
-# MALLOC is not set
-# MALLOC_SIMPLE is not set
-MALLOC_STANDARD=y
-MALLOC_GLIBC_COMPAT=y
-UCLIBC_DYNAMIC_ATEXIT=y
-COMPAT_ATEXIT=y
-UCLIBC_SUSV3_LEGACY=y
-# UCLIBC_SUSV3_LEGACY_MACROS is not set
-# UCLIBC_HAS_STUBS is not set
-UCLIBC_HAS_SHADOW=y
-UCLIBC_HAS_PROGRAM_INVOCATION_NAME=y
-UCLIBC_HAS___PROGNAME=y
-UCLIBC_HAS_PTY=y
-ASSUME_DEVPTS=y
-UNIX98PTY_ONLY=y
-# UCLIBC_HAS_GETPT is not set
-UCLIBC_HAS_TM_EXTENSIONS=y
-UCLIBC_HAS_TZ_CACHING=y
-UCLIBC_HAS_TZ_FILE=y
-UCLIBC_HAS_TZ_FILE_READ_MANY=y
-UCLIBC_TZ_FILE_PATH="/etc/TZ"
-
-#
-# Advanced Library Settings
-#
-UCLIBC_PWD_BUFFER_SIZE=256
-UCLIBC_GRP_BUFFER_SIZE=256
-
-#
-# Support various families of functions
-#
-# UCLIBC_LINUX_MODULE_24 is not set
-UCLIBC_LINUX_SPECIFIC=y
-UCLIBC_HAS_GNU_ERROR=y
-UCLIBC_BSD_SPECIFIC=y
-UCLIBC_HAS_BSD_ERR=y
-# UCLIBC_HAS_OBSOLETE_BSD_SIGNAL is not set
-# UCLIBC_HAS_OBSOLETE_SYSV_SIGNAL is not set
-# UCLIBC_NTP_LEGACY is not set
-# UCLIBC_SV4_DEPRECATED is not set
-UCLIBC_HAS_REALTIME=y
-UCLIBC_HAS_ADVANCED_REALTIME=y
-UCLIBC_HAS_EPOLL=y
-UCLIBC_HAS_XATTR=y
-# UCLIBC_HAS_PROFILING is not set
-UCLIBC_HAS_CRYPT_IMPL=y
-UCLIBC_HAS_CRYPT=y
-UCLIBC_HAS_NETWORK_SUPPORT=y
-UCLIBC_HAS_SOCKET=y
-UCLIBC_HAS_IPV4=y
-UCLIBC_HAS_IPV6=y
-UCLIBC_HAS_RPC=y
-UCLIBC_HAS_FULL_RPC=y
-UCLIBC_HAS_REENTRANT_RPC=y
-UCLIBC_USE_NETLINK=y
-UCLIBC_SUPPORT_AI_ADDRCONFIG=y
-UCLIBC_HAS_BSD_RES_CLOSE=y
-
-#
-# String and Stdio Support
-#
-UCLIBC_HAS_STRING_GENERIC_OPT=y
-UCLIBC_HAS_STRING_ARCH_OPT=y
-UCLIBC_HAS_CTYPE_TABLES=y
-UCLIBC_HAS_CTYPE_SIGNED=y
-# UCLIBC_HAS_CTYPE_UNSAFE is not set
-UCLIBC_HAS_CTYPE_CHECKED=y
-# UCLIBC_HAS_CTYPE_ENFORCED is not set
-UCLIBC_HAS_WCHAR=y
-# UCLIBC_HAS_LOCALE is not set
-UCLIBC_HAS_HEXADECIMAL_FLOATS=y
-UCLIBC_HAS_GLIBC_CUSTOM_PRINTF=y
-UCLIBC_PRINTF_SCANF_POSITIONAL_ARGS=9
-UCLIBC_HAS_SCANF_GLIBC_A_FLAG=y
-# UCLIBC_HAS_STDIO_BUFSIZ_NONE is not set
-# UCLIBC_HAS_STDIO_BUFSIZ_256 is not set
-# UCLIBC_HAS_STDIO_BUFSIZ_512 is not set
-# UCLIBC_HAS_STDIO_BUFSIZ_1024 is not set
-# UCLIBC_HAS_STDIO_BUFSIZ_2048 is not set
-UCLIBC_HAS_STDIO_BUFSIZ_4096=y
-# UCLIBC_HAS_STDIO_BUFSIZ_8192 is not set
-UCLIBC_HAS_STDIO_BUILTIN_BUFFER_NONE=y
-# UCLIBC_HAS_STDIO_BUILTIN_BUFFER_4 is not set
-# UCLIBC_HAS_STDIO_BUILTIN_BUFFER_8 is not set
-# UCLIBC_HAS_STDIO_SHUTDOWN_ON_ABORT is not set
-UCLIBC_HAS_STDIO_GETC_MACRO=y
-UCLIBC_HAS_STDIO_PUTC_MACRO=y
-UCLIBC_HAS_STDIO_AUTO_RW_TRANSITION=y
-# UCLIBC_HAS_FOPEN_LARGEFILE_MODE is not set
-UCLIBC_HAS_FOPEN_EXCLUSIVE_MODE=y
-UCLIBC_HAS_GLIBC_CUSTOM_STREAMS=y
-UCLIBC_HAS_PRINTF_M_SPEC=y
-UCLIBC_HAS_ERRNO_MESSAGES=y
-# UCLIBC_HAS_SYS_ERRLIST is not set
-UCLIBC_HAS_SIGNUM_MESSAGES=y
-# UCLIBC_HAS_SYS_SIGLIST is not set
-UCLIBC_HAS_GNU_GETOPT=y
-UCLIBC_HAS_GNU_GETSUBOPT=y
-
-#
-# Big and Tall
-#
-UCLIBC_HAS_REGEX=y
-UCLIBC_HAS_REGEX_OLD=y
-UCLIBC_HAS_FNMATCH=y
-UCLIBC_HAS_FNMATCH_OLD=y
-UCLIBC_HAS_WORDEXP=y
-UCLIBC_HAS_FTW=y
-UCLIBC_HAS_GLOB=y
-UCLIBC_HAS_GNU_GLOB=y
-
-#
-# Library Installation Options
-#
-SHARED_LIB_LOADER_PREFIX="/lib"
-RUNTIME_PREFIX="/"
-DEVEL_PREFIX="/usr/"
-
-#
-# Security options
-#
-# UCLIBC_BUILD_PIE is not set
-UCLIBC_HAS_ARC4RANDOM=y
-# HAVE_NO_SSP is not set
-# UCLIBC_HAS_SSP is not set
-UCLIBC_BUILD_RELRO=y
-# UCLIBC_BUILD_NOW is not set
-UCLIBC_BUILD_NOEXECSTACK=y
-
-#
-# uClibc development/debugging options
-#
-CROSS_COMPILER_PREFIX=""
-UCLIBC_EXTRA_CFLAGS=""
-# DODEBUG is not set
-# DODEBUG_PT is not set
-DOSTRIP=y
-# DOASSERTS is not set
-# SUPPORT_LD_DEBUG is not set
-# SUPPORT_LD_DEBUG_EARLY is not set
-# UCLIBC_MALLOC_DEBUGGING is not set
-WARNINGS="-Wall"
-# EXTRA_WARNINGS is not set
-# DOMULTI is not set
-# UCLIBC_MJN3_ONLY is not set