rework architecture / embedded systems concept

Make configuration of new targets cheap.
Just add a new file in target/arch/sys-enabled/foo.
See other files for syntax. While doing runtime tests
with the new infrastructure I've updated a lot of other
stuff:
- gcc 4.5.2
- uClibc 0.9.32-rc1 (NPTL)
- strongswan, php, miredo, parted, util-linux-ng, e2fsprogs

I promise, this is the last big fat commit this year ;)

12 files changed, 0 insertions, 2102 deletions

diff --git a/target/ag241/Makefile b/target/ag241/Makefile
deleted file mode 100644
index ac95593fb..000000000
--- a/target/ag241/Makefile
+++ /dev/null
@@ -1,50 +0,0 @@
-# This file is part of the OpenADK project. OpenADK is copyrighted
-# material, please see the LICENCE file in the top-level directory.
-
-include $(TOPDIR)/rules.mk
-include $(TOPDIR)/mk/kernel.mk
-include $(TOPDIR)/mk/modules.mk
-include $(TOPDIR)/mk/kernel-build.mk
-include $(TOPDIR)/mk/image.mk
-
-$(TOOLS_BUILD_DIR):
-	mkdir -p $(TOOLS_BUILD_DIR)
-
-tools-compile: $(TOOLS_BUILD_DIR)
-	$(MAKE) -C tools/addpattern
-	$(MAKE) -C tools/srec2bin
-	$(MAKE) -C ../tools/squashfs prepare compile install
-
-kernel-install: tools-compile
-	${TARGET_CROSS}objcopy -S -O srec $(LINUX_DIR)/vmlinuz \
-		$(LINUX_DIR)/vmlinux.srec
-	PATH='${TARGET_PATH}' \
-	srec2bin $(LINUX_DIR)/vmlinux.srec $(LINUX_DIR)/vmlinux.bin
-	(dd if=/dev/zero bs=16 count=1; cat $(LINUX_DIR)/vmlinux.bin) > \
-		$(LINUX_DIR)/vmlinux.tmp
-	PATH='${TARGET_PATH}' \
-	addpattern -p AG3B -b -r 2.0 -i $(LINUX_DIR)/vmlinux.tmp \
-		-o $(BIN_DIR)/${ADK_TARGET}-${FS}-kernel 2>/dev/null
-
-ifeq ($(FS),squashfs)
-imageinstall: kernel-install $(BIN_DIR)/$(ROOTFSSQUASHFS)
-	@if [ $$(stat --format=%s ${BUILD_DIR}/${ROOTFSSQUASHFS}) -gt 3801088 ];then \
-		echo 'Image is too big!'; \
-	else \
-		${CP} ${BUILD_DIR}/${ROOTFSSQUASHFS} ${BIN_DIR}/${ROOTFSSQUASHFS}; \
-		echo The image file is $(ROOTFSSQUASHFS); \
-		echo 'You can flash the image via tftp:'; \
-		echo 'tftp 192.168.1.1'; \
-		echo 'tftp> binary'; \
-		echo "tftp> put $(ROOTFSSQUASHFS) upgrade_code.bin"; \
-	fi
-endif
-ifeq ($(FS),nfsroot)
-imageinstall: kernel-install $(BIN_DIR)/$(ROOTFSUSERTARBALL)
-	@echo 'The kernel file is: ${BIN_DIR}/${ADK_TARGET}-${FS}-kernel'
-	@echo 'The nfs root tarball is: ${BIN_DIR}/${ROOTFSUSERTARBALL}'
-	@echo 'You can flash the kernel via tftp:'
-	@echo 'tftp 192.168.1.1'
-	@echo 'tftp> binary'
-	@echo 'tftp> put ${ADK_TARGET}-${FS}-kernel upgrade_code.bin'
-endif
diff --git a/target/ag241/files/etc/inittab b/target/ag241/files/etc/inittab
deleted file mode 100644
index 4566ae3e8..000000000
--- a/target/ag241/files/etc/inittab
+++ /dev/null
@@ -1,3 +0,0 @@
-::sysinit:/etc/init.d/rcS
-::shutdown:/etc/init.d/rcK
-ttyS0::respawn:/sbin/getty -i -L ttyS0 38400 vt100
diff --git a/target/ag241/files/etc/network/interfaces b/target/ag241/files/etc/network/interfaces
deleted file mode 100644
index 519928df9..000000000
--- a/target/ag241/files/etc/network/interfaces
+++ /dev/null
@@ -1,9 +0,0 @@
-auto lo
-iface lo inet loopback
-
-auto nas0
-iface nas0 inet manual
-
-auto br0
-iface br0 inet manual
-	bridge-ports eth0 nas0
diff --git a/target/ag241/kernel.config b/target/ag241/kernel.config
deleted file mode 100644
index ab0ba7236..000000000
--- a/target/ag241/kernel.config
+++ /dev/null
@@ -1,918 +0,0 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.33.1
-# Sun Mar 28 22:44:19 2010
-#
-CONFIG_MIPS=y
-
-#
-# Machine selection
-#
-# CONFIG_MACH_ALCHEMY is not set
-CONFIG_AR7=y
-# CONFIG_BCM47XX is not set
-# CONFIG_BCM63XX is not set
-# CONFIG_MIPS_COBALT is not set
-# CONFIG_MACH_DECSTATION is not set
-# CONFIG_MACH_JAZZ is not set
-# CONFIG_LASAT is not set
-# CONFIG_MACH_LOONGSON is not set
-# CONFIG_MIPS_MALTA is not set
-# CONFIG_MIPS_SIM is not set
-# CONFIG_NEC_MARKEINS is not set
-# CONFIG_MACH_VR41XX is not set
-# CONFIG_NXP_STB220 is not set
-# CONFIG_NXP_STB225 is not set
-# CONFIG_PNX8550_JBS is not set
-# CONFIG_PNX8550_STB810 is not set
-# CONFIG_PMC_MSP is not set
-# CONFIG_PMC_YOSEMITE is not set
-# CONFIG_POWERTV is not set
-# CONFIG_SGI_IP22 is not set
-# CONFIG_SGI_IP27 is not set
-# CONFIG_SGI_IP28 is not set
-# CONFIG_SGI_IP32 is not set
-# CONFIG_SIBYTE_CRHINE is not set
-# CONFIG_SIBYTE_CARMEL is not set
-# CONFIG_SIBYTE_CRHONE is not set
-# CONFIG_SIBYTE_RHONE is not set
-# CONFIG_SIBYTE_SWARM is not set
-# CONFIG_SIBYTE_LITTLESUR is not set
-# CONFIG_SIBYTE_SENTOSA is not set
-# CONFIG_SIBYTE_BIGSUR is not set
-# CONFIG_SNI_RM is not set
-# CONFIG_MACH_TX39XX is not set
-# CONFIG_MACH_TX49XX is not set
-# CONFIG_MIKROTIK_RB532 is not set
-# CONFIG_WR_PPMC is not set
-# CONFIG_CAVIUM_OCTEON_SIMULATOR is not set
-# CONFIG_CAVIUM_OCTEON_REFERENCE_BOARD is not set
-# CONFIG_ALCHEMY_GPIO_INDIRECT is not set
-CONFIG_LOONGSON_UART_BASE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_ARCH_SUPPORTS_OPROFILE=y
-CONFIG_GENERIC_FIND_NEXT_BIT=y
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_CMOS_UPDATE=y
-CONFIG_SCHED_OMIT_FRAME_POINTER=y
-CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-CONFIG_CEVT_R4K_LIB=y
-CONFIG_CEVT_R4K=y
-CONFIG_CSRC_R4K_LIB=y
-CONFIG_CSRC_R4K=y
-CONFIG_DMA_NONCOHERENT=y
-CONFIG_DMA_NEED_PCI_MAP_STATE=y
-CONFIG_SYS_HAS_EARLY_PRINTK=y
-# CONFIG_NO_IOPORT is not set
-CONFIG_GENERIC_GPIO=y
-# CONFIG_CPU_BIG_ENDIAN is not set
-CONFIG_CPU_LITTLE_ENDIAN=y
-CONFIG_SYS_SUPPORTS_LITTLE_ENDIAN=y
-CONFIG_IRQ_CPU=y
-CONFIG_SWAP_IO_SPACE=y
-CONFIG_BOOT_ELF32=y
-CONFIG_MIPS_L1_CACHE_SHIFT=5
-
-#
-# CPU selection
-#
-# CONFIG_CPU_LOONGSON2E is not set
-# CONFIG_CPU_LOONGSON2F is not set
-CONFIG_CPU_MIPS32_R1=y
-# CONFIG_CPU_MIPS32_R2 is not set
-# CONFIG_CPU_MIPS64_R1 is not set
-# CONFIG_CPU_MIPS64_R2 is not set
-# CONFIG_CPU_R3000 is not set
-# CONFIG_CPU_TX39XX is not set
-# CONFIG_CPU_VR41XX is not set
-# CONFIG_CPU_R4300 is not set
-# CONFIG_CPU_R4X00 is not set
-# CONFIG_CPU_TX49XX is not set
-# CONFIG_CPU_R5000 is not set
-# CONFIG_CPU_R5432 is not set
-# CONFIG_CPU_R5500 is not set
-# CONFIG_CPU_R6000 is not set
-# CONFIG_CPU_NEVADA is not set
-# CONFIG_CPU_R8000 is not set
-# CONFIG_CPU_R10000 is not set
-# CONFIG_CPU_RM7000 is not set
-# CONFIG_CPU_RM9000 is not set
-# CONFIG_CPU_SB1 is not set
-# CONFIG_CPU_CAVIUM_OCTEON is not set
-CONFIG_SYS_SUPPORTS_ZBOOT=y
-CONFIG_SYS_SUPPORTS_ZBOOT_UART16550=y
-CONFIG_SYS_HAS_CPU_MIPS32_R1=y
-CONFIG_CPU_MIPS32=y
-CONFIG_CPU_MIPSR1=y
-CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y
-CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y
-CONFIG_HARDWARE_WATCHPOINTS=y
-
-#
-# Kernel type
-#
-CONFIG_32BIT=y
-# CONFIG_64BIT is not set
-CONFIG_PAGE_SIZE_4KB=y
-# CONFIG_PAGE_SIZE_8KB is not set
-# CONFIG_PAGE_SIZE_16KB is not set
-# CONFIG_PAGE_SIZE_32KB is not set
-# CONFIG_PAGE_SIZE_64KB is not set
-CONFIG_CPU_HAS_PREFETCH=y
-CONFIG_MIPS_MT_DISABLED=y
-# CONFIG_MIPS_MT_SMP is not set
-# CONFIG_MIPS_MT_SMTC is not set
-CONFIG_CPU_HAS_SYNC=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_CPU_SUPPORTS_HIGHMEM=y
-CONFIG_ARCH_FLATMEM_ENABLE=y
-CONFIG_ARCH_POPULATES_NODE_MAP=y
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=4
-# CONFIG_PHYS_ADDR_T_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=0
-CONFIG_VIRT_TO_BUS=y
-# CONFIG_KSM is not set
-CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
-CONFIG_TICK_ONESHOT=y
-# CONFIG_NO_HZ is not set
-CONFIG_HIGH_RES_TIMERS=y
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-# CONFIG_HZ_48 is not set
-CONFIG_HZ_100=y
-# CONFIG_HZ_128 is not set
-# CONFIG_HZ_250 is not set
-# CONFIG_HZ_256 is not set
-# CONFIG_HZ_1000 is not set
-# CONFIG_HZ_1024 is not set
-CONFIG_SYS_SUPPORTS_ARBIT_HZ=y
-CONFIG_HZ=100
-CONFIG_PREEMPT_NONE=y
-# CONFIG_PREEMPT_VOLUNTARY is not set
-# CONFIG_PREEMPT is not set
-# CONFIG_KEXEC is not set
-# CONFIG_SECCOMP is not set
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-CONFIG_CONSTRUCTORS=y
-
-#
-# General setup
-#
-CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
-# CONFIG_LOCALVERSION_AUTO is not set
-CONFIG_HAVE_KERNEL_GZIP=y
-CONFIG_HAVE_KERNEL_BZIP2=y
-CONFIG_HAVE_KERNEL_LZMA=y
-CONFIG_HAVE_KERNEL_LZO=y
-# CONFIG_KERNEL_GZIP is not set
-# CONFIG_KERNEL_BZIP2 is not set
-CONFIG_KERNEL_LZMA=y
-# CONFIG_KERNEL_LZO is not set
-# CONFIG_SWAP is not set
-CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
-CONFIG_POSIX_MQUEUE=y
-CONFIG_POSIX_MQUEUE_SYSCTL=y
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_AUDIT is not set
-
-#
-# RCU Subsystem
-#
-CONFIG_TREE_RCU=y
-# CONFIG_TREE_PREEMPT_RCU is not set
-# CONFIG_TINY_RCU is not set
-# CONFIG_RCU_TRACE is not set
-CONFIG_RCU_FANOUT=32
-# CONFIG_RCU_FANOUT_EXACT is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_IKCONFIG is not set
-CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_GROUP_SCHED is not set
-# CONFIG_CGROUPS is not set
-# CONFIG_SYSFS_DEPRECATED_V2 is not set
-# CONFIG_RELAY is not set
-# CONFIG_NAMESPACES is not set
-# CONFIG_BLK_DEV_INITRD is not set
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
-CONFIG_ANON_INODES=y
-CONFIG_EMBEDDED=y
-CONFIG_SYSCTL_SYSCALL=y
-# CONFIG_KALLSYMS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-# CONFIG_BUG is not set
-# CONFIG_ELF_CORE is not set
-# CONFIG_PCSPKR_PLATFORM is not set
-CONFIG_BASE_FULL=y
-# CONFIG_FUTEX is not set
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-# CONFIG_AIO is not set
-
-#
-# Kernel Performance Events And Counters
-#
-# CONFIG_VM_EVENT_COUNTERS is not set
-# CONFIG_COMPAT_BRK is not set
-CONFIG_SLAB=y
-# CONFIG_SLUB is not set
-# CONFIG_SLOB is not set
-# CONFIG_PROFILING is not set
-CONFIG_HAVE_OPROFILE=y
-
-#
-# GCOV-based kernel profiling
-#
-# CONFIG_SLOW_WORK is not set
-CONFIG_HAVE_GENERIC_DMA_COHERENT=y
-CONFIG_SLABINFO=y
-CONFIG_BASE_SMALL=0
-CONFIG_MODULES=y
-# CONFIG_MODULE_FORCE_LOAD is not set
-CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_BLOCK=y
-# CONFIG_LBDAF is not set
-# CONFIG_BLK_DEV_BSG is not set
-# CONFIG_BLK_DEV_INTEGRITY is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_DEADLINE=y
-# CONFIG_IOSCHED_CFQ is not set
-CONFIG_DEFAULT_DEADLINE=y
-# CONFIG_DEFAULT_CFQ is not set
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="deadline"
-# CONFIG_INLINE_SPIN_TRYLOCK is not set
-# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
-# CONFIG_INLINE_SPIN_LOCK is not set
-# CONFIG_INLINE_SPIN_LOCK_BH is not set
-# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
-# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
-CONFIG_INLINE_SPIN_UNLOCK=y
-# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
-CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
-# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
-# CONFIG_INLINE_READ_TRYLOCK is not set
-# CONFIG_INLINE_READ_LOCK is not set
-# CONFIG_INLINE_READ_LOCK_BH is not set
-# CONFIG_INLINE_READ_LOCK_IRQ is not set
-# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
-CONFIG_INLINE_READ_UNLOCK=y
-# CONFIG_INLINE_READ_UNLOCK_BH is not set
-CONFIG_INLINE_READ_UNLOCK_IRQ=y
-# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
-# CONFIG_INLINE_WRITE_TRYLOCK is not set
-# CONFIG_INLINE_WRITE_LOCK is not set
-# CONFIG_INLINE_WRITE_LOCK_BH is not set
-# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
-# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
-CONFIG_INLINE_WRITE_UNLOCK=y
-# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
-CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
-# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
-# CONFIG_MUTEX_SPIN_ON_OWNER is not set
-# CONFIG_FREEZER is not set
-
-#
-# Bus options (PCI, PCMCIA, EISA, ISA, TC)
-#
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-CONFIG_MMU=y
-# CONFIG_PCCARD is not set
-
-#
-# Executable file formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_HAVE_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-CONFIG_TRAD_SIGNALS=y
-
-#
-# Power management options
-#
-CONFIG_ARCH_HIBERNATION_POSSIBLE=y
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
-# CONFIG_PM is not set
-CONFIG_NET=y
-
-#
-# Networking options
-#
-CONFIG_PACKET=y
-CONFIG_PACKET_MMAP=y
-CONFIG_UNIX=y
-# CONFIG_NET_KEY is not set
-CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
-# CONFIG_IP_PNP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-CONFIG_SYN_COOKIES=y
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
-# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
-# CONFIG_INET_XFRM_MODE_TUNNEL is not set
-# CONFIG_INET_XFRM_MODE_BEET is not set
-CONFIG_INET_LRO=y
-# CONFIG_INET_DIAG is not set
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
-# CONFIG_IPV6 is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_RDS is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_NET_DSA is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_PHONET is not set
-# CONFIG_IEEE802154 is not set
-# CONFIG_NET_SCHED is not set
-# CONFIG_DCB is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_CAN is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
-CONFIG_WIRELESS=y
-# CONFIG_CFG80211 is not set
-# CONFIG_LIB80211 is not set
-
-#
-# CFG80211 needs to be enabled for MAC80211
-#
-# CONFIG_WIMAX is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_DEVTMPFS=y
-CONFIG_DEVTMPFS_MOUNT=y
-# CONFIG_STANDALONE is not set
-# CONFIG_PREVENT_FIRMWARE_BUILD is not set
-# CONFIG_FW_LOADER is not set
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
-CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_TESTS is not set
-# CONFIG_MTD_CONCAT is not set
-CONFIG_MTD_PARTITIONS=y
-CONFIG_MTD_ROOTFS_ROOT_DEV=y
-# CONFIG_MTD_REDBOOT_PARTS is not set
-# CONFIG_MTD_CMDLINE_PARTS is not set
-CONFIG_MTD_AR7_PARTS=y
-
-#
-# User Modules And Translation Layers
-#
-CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLKDEVS=y
-CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-# CONFIG_MTD_OOPS is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
-CONFIG_MTD_CFI=y
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_GEN_PROBE=y
-# CONFIG_MTD_CFI_ADV_OPTIONS is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
-# CONFIG_MTD_CFI_INTELEXT is not set
-CONFIG_MTD_CFI_AMDSTD=y
-# CONFIG_MTD_CFI_STAA is not set
-CONFIG_MTD_CFI_UTIL=y
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-
-#
-# Mapping drivers for chip access
-#
-CONFIG_MTD_COMPLEX_MAPPINGS=y
-CONFIG_MTD_PHYSMAP=y
-# CONFIG_MTD_PHYSMAP_COMPAT is not set
-# CONFIG_MTD_GPIO_ADDR is not set
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
-# CONFIG_MTD_NAND is not set
-# CONFIG_MTD_ONENAND is not set
-
-#
-# LPDDR flash memory drivers
-#
-# CONFIG_MTD_LPDDR is not set
-
-#
-# UBI - Unsorted block images
-#
-# CONFIG_MTD_UBI is not set
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_COW_COMMON is not set
-# CONFIG_BLK_DEV_LOOP is not set
-
-#
-# DRBD disabled because PROC_FS, INET or CONNECTOR not selected
-#
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_RAM is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-# CONFIG_BLK_DEV_HD is not set
-# CONFIG_MISC_DEVICES is not set
-CONFIG_HAVE_IDE=y
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
-# CONFIG_SCSI is not set
-# CONFIG_SCSI_DMA is not set
-# CONFIG_SCSI_NETLINK is not set
-# CONFIG_ATA is not set
-# CONFIG_MD is not set
-CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_VETH is not set
-CONFIG_PHYLIB=y
-# CONFIG_SWCONFIG is not set
-
-#
-# MII PHY device drivers
-#
-# CONFIG_MARVELL_PHY is not set
-# CONFIG_DAVICOM_PHY is not set
-# CONFIG_QSEMI_PHY is not set
-# CONFIG_LXT_PHY is not set
-# CONFIG_CICADA_PHY is not set
-# CONFIG_VITESSE_PHY is not set
-# CONFIG_SMSC_PHY is not set
-# CONFIG_BROADCOM_PHY is not set
-# CONFIG_ICPLUS_PHY is not set
-# CONFIG_REALTEK_PHY is not set
-# CONFIG_NATIONAL_PHY is not set
-# CONFIG_STE10XP is not set
-# CONFIG_LSI_ET1011C_PHY is not set
-CONFIG_FIXED_PHY=y
-# CONFIG_MDIO_BITBANG is not set
-CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
-# CONFIG_AX88796 is not set
-# CONFIG_SMC91X is not set
-# CONFIG_DM9000 is not set
-# CONFIG_ETHOC is not set
-# CONFIG_SMSC911X is not set
-# CONFIG_DNET is not set
-# CONFIG_IBM_NEW_EMAC_ZMII is not set
-# CONFIG_IBM_NEW_EMAC_RGMII is not set
-# CONFIG_IBM_NEW_EMAC_TAH is not set
-# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
-# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
-# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
-# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
-# CONFIG_B44 is not set
-# CONFIG_KS8842 is not set
-# CONFIG_KS8851_MLL is not set
-CONFIG_CPMAC=y
-# CONFIG_NETDEV_1000 is not set
-# CONFIG_NETDEV_10000 is not set
-CONFIG_WLAN=y
-# CONFIG_HOSTAP is not set
-
-#
-# Enable WiMAX (Networking options) to see the WiMAX drivers
-#
-# CONFIG_WAN is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_ISDN is not set
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
-# CONFIG_INPUT is not set
-
-#
-# Hardware I/O ports
-#
-# CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-# CONFIG_VT is not set
-# CONFIG_DEVKMEM is not set
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-CONFIG_SERIAL_8250=y
-CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_SERIAL_8250_NR_UARTS=2
-CONFIG_SERIAL_8250_RUNTIME_UARTS=2
-# CONFIG_SERIAL_8250_EXTENDED is not set
-
-#
-# Non-8250 serial port support
-#
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
-# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
-# CONFIG_LEGACY_PTYS is not set
-# CONFIG_IPMI_HANDLER is not set
-# CONFIG_HW_RANDOM is not set
-# CONFIG_R3964 is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
-# CONFIG_I2C is not set
-# CONFIG_SPI is not set
-
-#
-# PPS support
-#
-# CONFIG_PPS is not set
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
-# CONFIG_HWMON is not set
-# CONFIG_THERMAL is not set
-CONFIG_WATCHDOG=y
-# CONFIG_WATCHDOG_NOWAYOUT is not set
-
-#
-# Watchdog Device Drivers
-#
-# CONFIG_SOFT_WATCHDOG is not set
-CONFIG_AR7_WDT=y
-CONFIG_SSB_POSSIBLE=y
-
-#
-# Sonics Silicon Backplane
-#
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_CORE is not set
-# CONFIG_MFD_SM501 is not set
-# CONFIG_HTC_PASIC3 is not set
-# CONFIG_MFD_TMIO is not set
-# CONFIG_REGULATOR is not set
-# CONFIG_MEDIA_SUPPORT is not set
-
-#
-# Graphics support
-#
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
-# CONFIG_FB is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-# CONFIG_SOUND is not set
-# CONFIG_USB_SUPPORT is not set
-# CONFIG_MMC is not set
-# CONFIG_MEMSTICK is not set
-# CONFIG_NEW_LEDS is not set
-# CONFIG_ACCESSIBILITY is not set
-CONFIG_RTC_LIB=y
-# CONFIG_RTC_CLASS is not set
-# CONFIG_DMADEVICES is not set
-# CONFIG_AUXDISPLAY is not set
-# CONFIG_UIO is not set
-
-#
-# TI VLYNQ
-#
-CONFIG_VLYNQ=y
-# CONFIG_STAGING is not set
-
-#
-# File systems
-#
-# CONFIG_EXT2_FS is not set
-# CONFIG_EXT3_FS is not set
-# CONFIG_EXT4_FS is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_BTRFS_FS is not set
-# CONFIG_NILFS2_FS is not set
-# CONFIG_AUFS_FS is not set
-CONFIG_FILE_LOCKING=y
-# CONFIG_FSNOTIFY is not set
-# CONFIG_DNOTIFY is not set
-# CONFIG_INOTIFY is not set
-# CONFIG_INOTIFY_USER is not set
-# CONFIG_QUOTA is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# Caches
-#
-# CONFIG_FSCACHE is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-# CONFIG_MSDOS_FS is not set
-# CONFIG_VFAT_FS is not set
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-# CONFIG_PROC_KCORE is not set
-CONFIG_PROC_SYSCTL=y
-# CONFIG_PROC_PAGE_MONITOR is not set
-CONFIG_SYSFS=y
-CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-# CONFIG_MISC_FILESYSTEMS is not set
-CONFIG_NETWORK_FILESYSTEMS=y
-# CONFIG_NFS_FS is not set
-# CONFIG_NFSD is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-# CONFIG_NLS is not set
-# CONFIG_DLM is not set
-
-#
-# Kernel hacking
-#
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_PRINTK_TIME=y
-# CONFIG_ENABLE_WARN_DEPRECATED is not set
-# CONFIG_ENABLE_MUST_CHECK is not set
-CONFIG_FRAME_WARN=2048
-CONFIG_MAGIC_SYSRQ=y
-# CONFIG_STRIP_ASM_SYMS is not set
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
-# CONFIG_DEBUG_KERNEL is not set
-# CONFIG_DEBUG_MEMORY_INIT is not set
-# CONFIG_RCU_CPU_STALL_DETECTOR is not set
-# CONFIG_SYSCTL_SYSCALL_CHECK is not set
-CONFIG_HAVE_FUNCTION_TRACER=y
-CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
-CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y
-CONFIG_HAVE_DYNAMIC_FTRACE=y
-CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
-CONFIG_TRACING_SUPPORT=y
-# CONFIG_FTRACE is not set
-# CONFIG_SAMPLES is not set
-CONFIG_HAVE_ARCH_KGDB=y
-CONFIG_EARLY_PRINTK=y
-CONFIG_CMDLINE_BOOL=y
-CONFIG_CMDLINE="cpmac.dumb_switch=1"
-# CONFIG_CMDLINE_OVERRIDE is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITYFS is not set
-# CONFIG_DEFAULT_SECURITY_SELINUX is not set
-# CONFIG_DEFAULT_SECURITY_SMACK is not set
-# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
-CONFIG_DEFAULT_SECURITY_DAC=y
-CONFIG_DEFAULT_SECURITY=""
-CONFIG_CRYPTO=y
-
-#
-# Crypto core or helper
-#
-# CONFIG_CRYPTO_MANAGER is not set
-# CONFIG_CRYPTO_MANAGER2 is not set
-# CONFIG_CRYPTO_GF128MUL is not set
-# CONFIG_CRYPTO_NULL is not set
-# CONFIG_CRYPTO_CRYPTD is not set
-# CONFIG_CRYPTO_AUTHENC is not set
-# CONFIG_CRYPTO_TEST is not set
-
-#
-# Authenticated Encryption with Associated Data
-#
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_SEQIV is not set
-
-#
-# Block modes
-#
-# CONFIG_CRYPTO_CBC is not set
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_CTS is not set
-# CONFIG_CRYPTO_ECB is not set
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_PCBC is not set
-# CONFIG_CRYPTO_XTS is not set
-
-#
-# Hash modes
-#
-# CONFIG_CRYPTO_HMAC is not set
-# CONFIG_CRYPTO_XCBC is not set
-# CONFIG_CRYPTO_VMAC is not set
-
-#
-# Digest
-#
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_GHASH is not set
-# CONFIG_CRYPTO_MD4 is not set
-# CONFIG_CRYPTO_MD5 is not set
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_RMD128 is not set
-# CONFIG_CRYPTO_RMD160 is not set
-# CONFIG_CRYPTO_RMD256 is not set
-# CONFIG_CRYPTO_RMD320 is not set
-# CONFIG_CRYPTO_SHA1 is not set
-# CONFIG_CRYPTO_SHA256 is not set
-# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_WP512 is not set
-
-#
-# Ciphers
-#
-# CONFIG_CRYPTO_AES is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_ARC4 is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_DES is not set
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_SALSA20 is not set
-# CONFIG_CRYPTO_SEED is not set
-# CONFIG_CRYPTO_SERPENT is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-
-#
-# Compression
-#
-# CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_ZLIB is not set
-# CONFIG_CRYPTO_LZO is not set
-
-#
-# Random Number Generation
-#
-# CONFIG_CRYPTO_ANSI_CPRNG is not set
-# CONFIG_CRYPTO_HW is not set
-
-#
-# OCF Configuration
-#
-# CONFIG_OCF_OCF is not set
-# CONFIG_BINARY_PRINTF is not set
-
-#
-# Library routines
-#
-CONFIG_GENERIC_FIND_LAST_BIT=y
-# CONFIG_CRC_CCITT is not set
-# CONFIG_CRC16 is not set
-# CONFIG_CRC_T10DIF is not set
-# CONFIG_CRC_ITU_T is not set
-# CONFIG_CRC32 is not set
-# CONFIG_CRC7 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
-CONFIG_NLATTR=y
diff --git a/target/ag241/patches/ar7.patch b/target/ag241/patches/ar7.patch
deleted file mode 100644
index dcaaa2ec7..000000000
--- a/target/ag241/patches/ar7.patch
+++ /dev/null
@@ -1,90 +0,0 @@
-diff -Nur linux-2.6.34.orig/arch/mips/ar7/prom.c linux-2.6.34/arch/mips/ar7/prom.c
---- linux-2.6.34.orig/arch/mips/ar7/prom.c	2010-05-16 23:17:36.000000000 +0200
-+++ linux-2.6.34/arch/mips/ar7/prom.c	2010-05-28 15:52:26.960965976 +0200
-@@ -206,6 +206,14 @@
- 	if (strstr(arcs_cmdline, "console="))
- 		return;
- 
-+#ifdef CONFIG_KGDB
-+	if (!strstr(prom_getcmdline(), "nokgdb")) {
-+		strcat(prom_getcmdline(), " console=kgdb");
-+		kgdb_enabled = 1;
-+		return;
-+	}
-+#endif
-+
- 	s = prom_getenv("modetty0");
- 	if (s) {
- 		baud = simple_strtoul(s, &p, 10);
-diff -Nur linux-2.6.34.orig/arch/mips/Kconfig linux-2.6.34/arch/mips/Kconfig
---- linux-2.6.34.orig/arch/mips/Kconfig	2010-05-16 23:17:36.000000000 +0200
-+++ linux-2.6.34/arch/mips/Kconfig	2010-05-28 15:52:27.142223192 +0200
-@@ -34,7 +34,6 @@
- 	select CEVT_R4K
- 	select CSRC_R4K
- 	select IRQ_CPU
--	select NO_EXCEPT_FILL
- 	select SWAP_IO_SPACE
- 	select SYS_HAS_CPU_MIPS32_R1
- 	select SYS_HAS_EARLY_PRINTK
-diff -Nur linux-2.6.34.orig/drivers/mtd/ar7part.c linux-2.6.34/drivers/mtd/ar7part.c
---- linux-2.6.34.orig/drivers/mtd/ar7part.c	2010-05-16 23:17:36.000000000 +0200
-+++ linux-2.6.34/drivers/mtd/ar7part.c	2010-05-28 15:52:27.232223555 +0200
-@@ -28,7 +28,7 @@
- #include <linux/bootmem.h>
- #include <linux/magic.h>
- 
--#define AR7_PARTS	4
-+#define AR7_PARTS	5
- #define ROOT_OFFSET	0xe0000
- 
- #define LOADER_MAGIC1	le32_to_cpu(0xfeedfa42)
-@@ -122,14 +122,19 @@
- 
- 	ar7_parts[2].name = "linux";
- 	ar7_parts[2].offset = pre_size;
--	ar7_parts[2].size = master->size - pre_size - post_size;
-+	ar7_parts[2].size = master->size - pre_size - post_size - 2*master->erasesize;
- 	ar7_parts[2].mask_flags = 0;
- 
- 	ar7_parts[3].name = "rootfs";
- 	ar7_parts[3].offset = root_offset;
--	ar7_parts[3].size = master->size - root_offset - post_size;
-+	ar7_parts[3].size = master->size - root_offset - post_size - 2*master->erasesize;
- 	ar7_parts[3].mask_flags = 0;
- 
-+	ar7_parts[4].name = "cfgfs";
-+	ar7_parts[4].offset = master->size - 2*master->erasesize;
-+	ar7_parts[4].size = 2*master->erasesize;
-+	ar7_parts[4].mask_flags = 0;
-+
- 	*pparts = ar7_parts;
- 	return AR7_PARTS;
- }
-diff -Nur linux-2.6.34.orig/drivers/mtd/maps/physmap.c linux-2.6.34/drivers/mtd/maps/physmap.c
---- linux-2.6.34.orig/drivers/mtd/maps/physmap.c	2010-05-16 23:17:36.000000000 +0200
-+++ linux-2.6.34/drivers/mtd/maps/physmap.c	2010-05-28 15:52:27.281073432 +0200
-@@ -79,7 +79,7 @@
- 					"map_rom",
- 					NULL };
- #ifdef CONFIG_MTD_PARTITIONS
--static const char *part_probe_types[] = { "cmdlinepart", "RedBoot", NULL };
-+static const char *part_probe_types[] = { "cmdlinepart", "RedBoot", "ar7part", NULL };
- #endif
- 
- static int physmap_flash_probe(struct platform_device *dev)
-diff -Nur linux-2.6.34.orig/drivers/serial/8250.c linux-2.6.34/drivers/serial/8250.c
---- linux-2.6.34.orig/drivers/serial/8250.c	2010-05-16 23:17:36.000000000 +0200
-+++ linux-2.6.34/drivers/serial/8250.c	2010-05-28 15:52:27.330968429 +0200
-@@ -2746,7 +2746,11 @@
- {
- 	struct uart_8250_port *up = (struct uart_8250_port *)port;
- 
-+#ifdef CONFIG_AR7
-+	wait_for_xmitr(up, BOTH_EMPTY);
-+#else
- 	wait_for_xmitr(up, UART_LSR_THRE);
-+#endif
- 	serial_out(up, UART_TX, ch);
- }
- 
diff --git a/target/ag241/target.mk b/target/ag241/target.mk
deleted file mode 100644
index 95a66a072..000000000
--- a/target/ag241/target.mk
+++ /dev/null
@@ -1,5 +0,0 @@
-include $(TOPDIR)/mk/kernel-ver.mk
-ARCH:=			mips
-CPU_ARCH:=		mipsel
-TARGET_OPTIMIZATION:=	-Os -pipe
-TARGET_CFLAGS_ARCH:=    -march=mips32
diff --git a/target/ag241/tools/addpattern/Makefile b/target/ag241/tools/addpattern/Makefile
deleted file mode 100644
index 3ac1884fa..000000000
--- a/target/ag241/tools/addpattern/Makefile
+++ /dev/null
@@ -1,4 +0,0 @@
-include $(TOPDIR)/rules.mk
-
-all:
-	$(HOSTCC) ${HOSTCFLAGS} -o ${STAGING_TOOLS}/bin/addpattern addpattern.c
diff --git a/target/ag241/tools/addpattern/addpattern.c b/target/ag241/tools/addpattern/addpattern.c
deleted file mode 100644
index 6f2a036c0..000000000
--- a/target/ag241/tools/addpattern/addpattern.c
+++ /dev/null
@@ -1,255 +0,0 @@
-/*
- * Copyright (C) 2004  Manuel Novoa III  <mjn3@codepoet.org>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
- * General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- */
-
-/* July 29, 2004
- *
- * This is a hacked replacement for the 'addpattern' utility used to
- * create wrt54g .bin firmware files.  It isn't pretty, but it does
- * the job for me.
- *
- * Extensions:
- *  -v allows setting the version string on the command line.
- *  -{0|1} sets the (currently ignored) hw_ver flag in the header
- *      to 0 or 1 respectively.
- */
-
-/* January 12, 2005
- * 
- * Modified by rodent at rodent dot za dot net
- * Support added for the new WRT54G v2.2 and WRT54GS v1.1 "flags"
- * Without the flags set to 0x7, the above units will refuse to flash.
- * 
- * Extensions:
- *  -{0|1|2} sets {0|1} sets hw_ver flag to 0/1. {2} sets hw_ver to 1
- *     and adds the new hardware "flags" for the v2.2/v1.1 units
-*/
-
-/* January 1, 2007
- *
- * Modified by juan.i.gonzalez at subdown dot net
- * Support added for the AG241v2  and similar
- *
- * Extensions:
- *  -r #.# adds revision hardware flags. AG241v2 and similar.
- *
- * AG241V2 firmware sets the hw_ver to 0x44.
- *
- * Example: -r 2.0
- *
- * Convert 2.0 to 20 to be an integer, and add 0x30 to skip special ASCII
- * #define HW_Version ((HW_REV * 10) + 0x30)  -> from cyutils.h
-*/
-
-#include <stdio.h>
-#include <stdlib.h>
-#include <string.h>
-#include <time.h>
-#include <unistd.h>
-#include <sys/stat.h>
-
-/**********************************************************************/
-
-#define CODE_ID		"U2ND"		/* from code_pattern.h */
-#define CODE_PATTERN   "W54S"	/* from code_pattern.h */
-#define PBOT_PATTERN   "PBOT"
-
-#define CYBERTAN_VERSION	"v3.37.2" /* from cyutils.h */
-
-/* WRT54G v2.2 and WRT54GS v1.1 "flags" (from 3.37.32 firmware cyutils.h) */
-#define SUPPORT_4712_CHIP      0x0001
-#define SUPPORT_INTEL_FLASH    0x0002
-#define SUPPORT_5325E_SWITCH   0x0004
-
-struct code_header {			/* from cyutils.h */
-	char magic[4];
-	char res1[4];				/* for extra magic */
-	char fwdate[3];
-	char fwvern[3];
-	char id[4];					/* U2ND */
-	char hw_ver;    			/* 0: for 4702, 1: for 4712 -- new in 2.04.3 */
-	char unused;
-	unsigned char flags[2];       /* SUPPORT_ flags new for 3.37.2 (WRT54G v2.2 and WRT54GS v1.1) */
-	unsigned char res2[10];
-} ;
-
-/**********************************************************************/
-
-void usage(void) __attribute__ (( __noreturn__ ));
-
-void usage(void)
-{
-	fprintf(stderr, "Usage: addpattern [-i trxfile] [-o binfile] [-p pattern] [-g] [-b] [-v v#.#.#] [-r #.#] [-{0|1|2|4}] -h\n");
-	exit(EXIT_FAILURE);
-}
-
-int main(int argc, char **argv)
-{
-	char buf[1024];	/* keep this at 1k or adjust garbage calc below */
-	struct code_header *hdr;
-	FILE *in = stdin;
-	FILE *out = stdout;
-	char *ifn = NULL;
-	char *ofn = NULL;
-	char *pattern = CODE_PATTERN;
-	char *pbotpat = PBOT_PATTERN;
-	char *version = CYBERTAN_VERSION;
-	int gflag = 0;
-	int pbotflag = 0;
-	int c;
-	int v0, v1, v2;
-	size_t off, n;
-	time_t t;
-	struct tm *ptm;
-
-	fprintf(stderr, "mjn3's addpattern replacement - v0.81\n");
-
-	hdr = (struct code_header *) buf;
-	memset(hdr, 0, sizeof(struct code_header));
-
-	while ((c = getopt(argc, argv, "i:o:p:gbv:0124hr:")) != -1) {
-		switch (c) {
-			case 'i':
-				ifn = optarg;
-				break;
-			case 'o':
-				ofn = optarg;
-				break;
-			case 'p':
-				pattern = optarg;
-				break;
-			case 'g':
-				gflag = 1;
-				break;
-			case 'b':
-				pbotflag = 1;
-				break;
-			case 'v':			/* extension to allow setting version */
-				version = optarg;
-				break;
-			case '0':
-				hdr->hw_ver = 0;
-				break;
-			case '1':
-				hdr->hw_ver = 1;
-				break;
-			case '2': 			/* new 54G v2.2 and 54GS v1.1 flags */
-				hdr->hw_ver = 1;
-				hdr->flags[0] |= SUPPORT_4712_CHIP;
-				hdr->flags[0] |= SUPPORT_INTEL_FLASH;
-				hdr->flags[0] |= SUPPORT_5325E_SWITCH;
-				break;
-			case '4':
-				/* V4 firmware sets the flags to 0x1f */
-				hdr->hw_ver = 0;
-				hdr->flags[0] = 0x1f;
-				break;
-                        case 'r':
-                                hdr->hw_ver = (char)(atof(optarg)*10)+0x30;
-                                break;
-
-                        case 'h':
-			default:
-				usage();
-		}
-	}
-
-    	if (optind != argc || optind == 1) {
-		fprintf(stderr, "illegal arg \"%s\"\n", argv[optind]);
-		usage();
-	}
-
-	if (strlen(pattern) != 4) {
-		fprintf(stderr, "illegal pattern \"%s\": length != 4\n", pattern);
-		usage();
-	}
-
-	if (ifn && !(in = fopen(ifn, "r"))) {
-		fprintf(stderr, "can not open \"%s\" for reading\n", ifn);
-		usage();
-	}
-
-	if (ofn && !(out = fopen(ofn, "w"))) {
-		fprintf(stderr, "can not open \"%s\" for writing\n", ofn);
-		usage();
-	}
-
-	if (time(&t) == (time_t)(-1)) {
-		fprintf(stderr, "time call failed\n");
-		return EXIT_FAILURE;
-	}
-
-	ptm = localtime(&t);
-
-	if (3 != sscanf(version, "v%d.%d.%d", &v0, &v1, &v2)) {
-		fprintf(stderr, "bad version string \"%s\"\n", version);
-		return EXIT_FAILURE;
-	}
-
-	memcpy(&hdr->magic, pattern, 4);
-	if (pbotflag)
-		memcpy(&hdr->res1, pbotpat, 4);
-	hdr->fwdate[0] = ptm->tm_year % 100;
-	hdr->fwdate[1] = ptm->tm_mon + 1;
-	hdr->fwdate[2] = ptm->tm_mday;
-	hdr->fwvern[0] = v0;
-	hdr->fwvern[1] = v1;
-	hdr->fwvern[2] = v2;
-	memcpy(&hdr->id, CODE_ID, strlen(CODE_ID));
-
-	off = sizeof(struct code_header);
-
-	fprintf(stderr, "writing firmware v%d.%d.%d on %d/%d/%d (y/m/d)\n",
-			v0, v1, v2,
-			hdr->fwdate[0], hdr->fwdate[1], hdr->fwdate[2]);
-
-
-	while ((n = fread(buf + off, 1, sizeof(buf)-off, in) + off) > 0) {
-		off = 0;
-		if (n < sizeof(buf)) {
-			if (ferror(in)) {
-			FREAD_ERROR:
-				fprintf(stderr, "fread error\n");
-				return EXIT_FAILURE;
-			}
-			if (gflag) {
-				gflag = sizeof(buf) - n;
-				memset(buf + n, 0xff, gflag);
-				fprintf(stderr, "adding %d bytes of garbage\n", gflag);
-				n = sizeof(buf);
-			}
-		}
-		if (!fwrite(buf, n, 1, out)) {
-		FWRITE_ERROR:
-			fprintf(stderr, "fwrite error\n");
-			return EXIT_FAILURE;
-		}
-	}
-	
-	if (ferror(in)) {
-		goto FREAD_ERROR;
-	}
-
-	if (fflush(out)) {
-		goto FWRITE_ERROR;
-	}
-
-	fclose(in);
-	fclose(out);
-
-	return EXIT_SUCCESS;
-}
diff --git a/target/ag241/tools/rules.mk b/target/ag241/tools/rules.mk
deleted file mode 100644
index a6a3684ac..000000000
--- a/target/ag241/tools/rules.mk
+++ /dev/null
@@ -1,7 +0,0 @@
-# This file is part of the OpenADK project. OpenADK is copyrighted
-# material, please see the LICENCE file in the top-level directory.
-
-WRKDIR_BASE=    ${TOOLS_BUILD_DIR}
-WRKDIR=		${WRKDIR_BASE}
-
-include ${TOPDIR}/mk/buildhlp.mk
diff --git a/target/ag241/tools/srec2bin/Makefile b/target/ag241/tools/srec2bin/Makefile
deleted file mode 100644
index dd6a285fd..000000000
--- a/target/ag241/tools/srec2bin/Makefile
+++ /dev/null
@@ -1,4 +0,0 @@
-include $(TOPDIR)/rules.mk
-
-all:
-	$(HOSTCC) ${HOSTCFLAGS} -o ${STAGING_TOOLS}/bin/srec2bin srec2bin.c
diff --git a/target/ag241/tools/srec2bin/srec2bin.c b/target/ag241/tools/srec2bin/srec2bin.c
deleted file mode 100644
index 1cffbaed9..000000000
--- a/target/ag241/tools/srec2bin/srec2bin.c
+++ /dev/null
@@ -1,524 +0,0 @@
-#include <stdio.h>
-#include <ctype.h>
-#include <string.h>
-
-//Rev 0.1 Original
-// 8 Jan 2001  MJH  Added code to write data to Binary file
-//                  note: outputfile is name.bin, where name is first part
-//                  of input file.  ie tmp.rec -> tmp.bin
-//
-//   srec2bin <input SREC file> <Output Binary File> <If Present, Big Endian>
-//
-//   TAG   
-//        bit32u TAG_BIG     = 0xDEADBE42;
-//        bit32u TAG_LITTLE  = 0xFEEDFA42;
-//
-//  File Structure
-//
-//  TAG    :   32 Bits
-//  [DATA RECORDS]
-//
-//  Data Records Structure
-//
-//  LENGTH  :  32 Bits    <- Length of DATA, excludes ADDRESS and CHECKSUM
-//  ADDRESS :  32 Bits
-//  DATA    :  8 Bits * LENGTH
-//  CHECKSUM:  32 Bits    <-  0 - (Sum of Length --> End of Data)
-//
-//  Note : If Length == 0, Address will be Program Start
-//
-//
-//  
-//
-//
-
-#define MajRevNum 0
-#define MinRevNum 2
-
-
-#define EndianSwitch(x) ((x >> 24) | (x << 24) | ((x << 8) & (0x00FF0000)) | ((x >> 8) & (0x0000FF00)) )
-
-typedef unsigned char bit8u;
-typedef unsigned int bit32u;
-typedef int bit32;
-
-#define FALSE 0
-#define TRUE (!FALSE)
-
-
-bit32u CheckSum;
-int RecStart;
-int debug;
-int verbose;
-
-FILE *OpenOutputFile( char *Name );
-FILE *fOut;
-bit32u RecLength=0;
-
-bit32u AddressCurrent;
-
-bit32u gh(char *cp,int nibs);
-
-int BigEndian;
-
-int inputline;
-
-// char buf[16*1024];
-
-char buffer[2048];
-char *cur_ptr;
-int cur_line=0;
-int cur_len=0;
-
-int s1s2s3_total=0;
-
-bit32u PBVal;
-int    PBValid;
-bit32u PBAdr;
-
-
-void dumpfTell(char *s, bit32u Value)
-{
-    int Length;
-    Length = (int) RecLength;
-    if (debug)
-          printf("[%s  ] ftell()[0x%08lX] Length[0x%4X] Length[%4d] Value[0x%08x]\n",
-                s, ftell(fOut), Length, Length, Value);
-}
-
-void DispHex(bit32u Hex)
-{
-//    printf("%X", Hex);
-}
-
-void WaitDisplay(void)
-{
-   static int Count=0;
-   static int Index=0;
-   char iline[]={"-\\|/"};
-
-   Count++;
-   if ((Count % 32)==0)
-   {
-     if (verbose)
-        printf("%c%c",iline[Index++],8);
-     Index &= 3;
-   }
-}
-
-
-void binOut32 ( bit32u Data )
-{
-// On UNIX machine all 32bit writes need ENDIAN switched
-//    Data = EndianSwitch(Data);
-//    fwrite( &Data, sizeof(bit32u), 1, fOut);
-
-   char sdat[4];
-   int i;
-
-   for(i=0;i<4;i++)
-    sdat[i]=(char)(Data>>(i*8));
-   fwrite( sdat, 1, 4, fOut);
-   dumpfTell("Out32" , Data);
-}
-
-// Only update RecLength on Byte Writes
-// All 32 bit writes will be for Length etc
-
-void binOut8 ( bit8u Data )
-{
-    int n;
-    dumpfTell("B4Data" , (bit32u) (Data & 0xFF) );
-    n = fwrite( &Data, sizeof(bit8u), 1, fOut);
-    if (n != 1)
-        printf("Error in writing %X for Address 0x%8X\n", Data, AddressCurrent);
-    RecLength += 1;
-}
-
-//  Currently ONLY used for outputting Program Start
-
-void binRecStart(bit32u Address)
-{
-    RecLength      = 0;
-    CheckSum       = Address;
-    RecStart       = TRUE;
-
-    if (debug)
-          printf("[RecStart] CheckSum[0x%08X] Length[%4d] Address[0x%08X]\n",
-                CheckSum, RecLength, Address);
-
-
-    dumpfTell("RecLength", RecLength);
-    binOut32( RecLength );
-    dumpfTell("Address", Address);
-    binOut32( Address );
-}
-
-void binRecEnd(void)
-{
-    long RecEnd;
-
-    if (!RecStart)   //  if no record started, do not end it
-    {
-        return;
-    }
-
-    RecStart = FALSE;
-
-
-    RecEnd = ftell(fOut);         // Save Current position
-
-    if (debug)
-          printf("[RecEnd  ] CheckSum[0x%08X] Length[%4d] Length[0x%X] RecEnd[0x%08lX]\n",
-                CheckSum, RecLength, RecLength, RecEnd);
-
-    fseek( fOut, -((long) RecLength), SEEK_CUR);  // move back Start Of Data
-
-    dumpfTell("Data   ", -1);
-
-    fseek( fOut, -4, SEEK_CUR);  // move back Start Of Address
-
-    dumpfTell("Address   ", -1);
-
-    fseek( fOut, -4, SEEK_CUR);  // move back Start Of Length
-
-    dumpfTell("Length   ", -1);
-
-    binOut32( RecLength );
-
-    fseek( fOut, RecEnd, SEEK_SET);  // move to end of Record
-
-    CheckSum += RecLength;
-
-    CheckSum =  ~CheckSum + 1;  // Two's complement
-
-    binOut32( CheckSum );
-
-    if (verbose)
-        printf("[Created Record of %d Bytes with CheckSum [0x%8X]\n", RecLength, CheckSum);
-}
-
-void binRecOutProgramStart(bit32u Address)
-{
-    if (Address != (AddressCurrent+1))
-    {
-        binRecEnd();
-        binRecStart(Address);
-    }
-    AddressCurrent = Address;
-}
-void binRecOutByte(bit32u Address, bit8u Data)
-{
-    //  If Address is one after Current Address, output Byte
-    //  If not, close out last record, update Length, write checksum
-    //  Then Start New Record, updating Current Address
-
-    if (Address != (AddressCurrent+1))
-    {
-        binRecEnd();
-        binRecStart(Address);
-    }
-    AddressCurrent = Address;
-    CheckSum += Data;
-    binOut8( Data );
-}
-
-//=============================================================================
-//       SUPPORT FUNCTIONS
-//=============================================================================
-int readline(FILE *fil,char *buf,int len)
-{
-    int rlen;
-    
-    rlen=0;
-    if (len==0)  return(0);
-    while(1)
-    {
-      if (cur_len==0)
-      {
-        cur_len=fread(buffer, 1, sizeof(buffer), fil);
-        if (cur_len==0)
-        {
-          if (rlen)
-          {
-            *buf=0;
-            return(rlen);
-          }
-          return(-1);
-        }
-        cur_ptr=buffer;
-      }
-      if (cur_len)
-      {
-        if (*cur_ptr=='\n')
-        {
-          *buf=0;
-          cur_ptr++;
-          cur_len--;
-          return(rlen);
-        }
-         else
-         {
-           if ((len>1)&&(*cur_ptr!='\r'))
-           {
-             *buf++=*cur_ptr++;
-             len--;
-           }
-           else
-             cur_ptr++;
-
-           rlen++;
-           cur_len--;
-         }
-      }
-      else
-      {
-        *buf=0;
-        cur_ptr++;
-        cur_len--;
-        return(rlen);
-      }
-    }
-}
-
-
-int SRLerrorout(char *c1,char *c2)
-{
-  printf("\nERROR: %s - '%s'.",c1,c2);
-  return(FALSE);
-}
-
-
-int checksum(char *cp,int count)
-{
-  char *scp;
-  int cksum;
-  int dum;
-
-  scp=cp;
-  while(*scp)
-  {
-    if (!isxdigit(*scp++))
-      return(SRLerrorout("Invalid hex digits",cp));
-  }
-  scp=cp;
-
-  cksum=count;
-
-  while(count)
-  {
-    cksum += gh(scp,2);
-    if (count == 2)
-        dum = ~cksum;
-    scp += 2;
-    count--;
-  }
-  cksum&=0x0ff; 
-  //  printf("\nCk:%02x",cksum);
-  return(cksum==0x0ff);
-}
-
-bit32u gh(char *cp,int nibs)
-{
-  int i;
-  bit32u j;
-
-  j=0;
-
-  for(i=0;i<nibs;i++)
-  {
-    j<<=4;
-    if ((*cp>='a')&&(*cp<='z')) *cp &= 0x5f;
-    if ((*cp>='0')&&(*cp<='9')) 
-      j += (*cp-0x30);
-     else
-      if ((*cp>='A')&&(*cp<='F'))
-        j += (*cp-0x37);
-       else
-        SRLerrorout("Bad Hex char", cp);
-    cp++;
-  }
-  return(j);
-}
-
-
-//=============================================================================
-//       PROCESS SREC LINE
-//=============================================================================
-
-int srecLine(char *pSrecLine)
-{
-    char *scp,ch;
-    int  itmp,count,dat;
-    bit32u adr;
-    static bit32u RecordCounter=0;
-
-    cur_line++;
-    scp=pSrecLine;
-  
-    if (*pSrecLine!='S')
-      return(SRLerrorout("Not an Srecord file",scp));
-    pSrecLine++;
-    if (strlen(pSrecLine)<4)
-      return(SRLerrorout("Srecord too short",scp));
-  
-    ch=*pSrecLine++;
-  
-    count=gh(pSrecLine,2);
-  
-    pSrecLine += 2;
-  
-  //  if(debug)
-  //        printf("count %d, strlen(pSrecLine) = %d, pSrecLine =[%s]\n", count, strlen(pSrecLine), pSrecLine);
-     RecordCounter++;
-     DispHex(RecordCounter);
-  
-    if ((count*2) != strlen(pSrecLine)) return(SRLerrorout("Count field larger than record",scp));
-  
-    if (!checksum(pSrecLine, count)) return(SRLerrorout("Bad Checksum",scp));
-  
-    switch(ch)
-    {
-        case '0': if (count<3) return(SRLerrorout("Invalid Srecord count field",scp));
-                  itmp=gh(pSrecLine,4); pSrecLine+=4; count-=2;
-                  if (itmp) return(SRLerrorout("Srecord 1 address not zero",scp));
-        break;
-        case '1': if (count<3) return(SRLerrorout("Invalid Srecord count field",scp));
-                  return(SRLerrorout("Srecord Not valid for MIPS",scp));
-        break;
-        case '2': if (count<4) return(SRLerrorout("Invalid Srecord count field",scp));
-                  return(SRLerrorout("Srecord Not valid for MIPS",scp));
-        break;
-        case '3': if (count<5) return(SRLerrorout("Invalid Srecord count field",scp));
-                  adr=gh(pSrecLine,8); pSrecLine+=8; count-=4;
-                  count--;
-                  while(count)
-                  {
-                    dat=gh(pSrecLine,2); pSrecLine+=2; count--;
-                    binRecOutByte(adr, (char) (dat & 0xFF));
-                    adr++;
-                  }
-                  s1s2s3_total++;
-        break;
-        case '4': return(SRLerrorout("Invalid Srecord type",scp));
-        break;
-        case '5': if (count<3) return(SRLerrorout("Invalid Srecord count field",scp));
-                  itmp=gh(pSrecLine,4); pSrecLine+=4; count-=2;
-                  if (itmp|=s1s2s3_total) return(SRLerrorout("Incorrect number of S3 Record processed",scp));
-        break;
-        case '6': return(SRLerrorout("Invalid Srecord type",scp));
-        break;
-        case '7': // PROGRAM START
-                  if (count<5) return(SRLerrorout("Invalid Srecord count field",scp));
-                  adr=gh(pSrecLine,8); pSrecLine+=8; count-=4;
-                  if (count!=1) return(SRLerrorout("Invalid Srecord count field",scp));
-                  binRecOutProgramStart(adr);
-        break;
-        case '8': if (count<4) return(SRLerrorout("Invalid Srecord count field",scp));
-                  return(SRLerrorout("Srecord Not valid for MIPS",scp));
-        break;
-        case '9': if (count<3) return(SRLerrorout("Invalid Srecord count field",scp));
-                  return(SRLerrorout("Srecord Not valid for MIPS",scp));
-        break;
-        default:
-        break;
-    }
-    return(TRUE);
-}
- 
-
-//=============================================================================
-//       MAIN LOGIC, READS IN LINE AND OUTPUTS BINARY
-//=============================================================================
-
-int srec2bin(int argc,char *argv[],int verbose)
-{
-    int i,rlen,sts;
-    FILE *fp;
-    char ac;
-    char buff[256];
-    bit32u TAG_BIG     = 0xDEADBE42;
-    bit32u TAG_LITTLE  = 0xFEEDFA42;
-
-    bit32u Tag;
-
-  
-    if(argc < 3)
-    {
-      printf("\nError: <srec2bin <srec input file> <bin output file>\n\n");
-      return(0);
-    }
-  
-    if (argc > 3) BigEndian=TRUE; else BigEndian=FALSE;
-
-    if (BigEndian)
-        Tag = TAG_BIG;
-    else
-        Tag = TAG_LITTLE;
-
-    if (verbose)
-       printf("\nEndian: %s, Tag is 0x%8X\n",(BigEndian)?"BIG":"LITTLE", Tag);
-
-    fp = fopen(argv[1],"rt");
-
-    if (fp==NULL)
-    {
-      printf("\nError: Opening input file, %s.", argv[1]);
-      return(0);
-    }
-  
-    fOut = fopen( argv[2], "wb");
-    
-    if (fOut==NULL)
-    {
-      printf("\nError: Opening Output file, %s.", argv[2]);
-      if(fp) fclose(fp);
-      return(0);
-    }
- 
-    RecStart = FALSE;
-
-    AddressCurrent = 0xFFFFFFFFL;
-
-    // Setup Tag 
-  
-    dumpfTell("Tag", Tag);
-
-    binOut32(Tag);
-
-  
-    inputline=0;
-    sts=TRUE;
-
-    rlen = readline(fp,buff,sizeof buff);
-
-    while( (sts) && (rlen != -1))
-    {
-        if (strlen(buff))
-        {
-            sts &= srecLine(buff);
-            WaitDisplay();
-        }
-       rlen = readline(fp,buff,sizeof buff);
-    }
-
-  
-  //  printf("PC: 0x%08X, Length 0x%08X, Tag 0x%08X\n", ProgramStart, RecLength, TAG_LITTLE);
-  
-    binRecEnd();
-
-    if(fp) fclose(fp);
-    if(fOut) fclose(fOut);
-
-    return(1);
-}
-
-main(int argc, char *argv[])
-{
-    debug = TRUE;
-    debug = FALSE;
-    verbose = FALSE;
-    srec2bin(argc,argv,verbose);
-    return 0;
-}
-
diff --git a/target/ag241/uclibc.config b/target/ag241/uclibc.config
deleted file mode 100644
index 4ec29e966..000000000
--- a/target/ag241/uclibc.config
+++ /dev/null
@@ -1,233 +0,0 @@
-#
-# Automatically generated make config: don't edit
-# Version: 0.9.30.1
-# Wed Jan 13 08:23:16 2010
-#
-# TARGET_alpha is not set
-# TARGET_arm is not set
-# TARGET_avr32 is not set
-# TARGET_bfin is not set
-# TARGET_cris is not set
-# TARGET_e1 is not set
-# TARGET_frv is not set
-# TARGET_h8300 is not set
-# TARGET_hppa is not set
-# TARGET_i386 is not set
-# TARGET_i960 is not set
-# TARGET_ia64 is not set
-# TARGET_m68k is not set
-# TARGET_microblaze is not set
-TARGET_mips=y
-# TARGET_nios is not set
-# TARGET_nios2 is not set
-# TARGET_powerpc is not set
-# TARGET_sh is not set
-# TARGET_sh64 is not set
-# TARGET_sparc is not set
-# TARGET_v850 is not set
-# TARGET_vax is not set
-# TARGET_x86_64 is not set
-# TARGET_xtensa is not set
-
-#
-# Target Architecture Features and Options
-#
-TARGET_ARCH="mips"
-FORCE_OPTIONS_FOR_ARCH=y
-ARCH_CFLAGS="-mno-split-addresses"
-CONFIG_MIPS_O32_ABI=y
-# CONFIG_MIPS_N32_ABI is not set
-# CONFIG_MIPS_N64_ABI is not set
-# CONFIG_MIPS_ISA_1 is not set
-# CONFIG_MIPS_ISA_2 is not set
-# CONFIG_MIPS_ISA_3 is not set
-# CONFIG_MIPS_ISA_4 is not set
-CONFIG_MIPS_ISA_MIPS32=y
-# CONFIG_MIPS_ISA_MIPS32R2 is not set
-# CONFIG_MIPS_ISA_MIPS64 is not set
-TARGET_SUBARCH=""
-
-#
-# Using ELF file format
-#
-ARCH_ANY_ENDIAN=y
-ARCH_LITTLE_ENDIAN=y
-# ARCH_WANTS_BIG_ENDIAN is not set
-ARCH_WANTS_LITTLE_ENDIAN=y
-ARCH_HAS_MMU=y
-ARCH_USE_MMU=y
-UCLIBC_HAS_FLOATS=y
-UCLIBC_HAS_FPU=y
-DO_C99_MATH=y
-UCLIBC_HAS_FENV=y
-KERNEL_HEADERS=""
-HAVE_DOT_CONFIG=y
-
-#
-# General Library Settings
-#
-# HAVE_NO_PIC is not set
-DOPIC=y
-# ARCH_HAS_NO_SHARED is not set
-# ARCH_HAS_NO_LDSO is not set
-HAVE_SHARED=y
-# FORCE_SHAREABLE_TEXT_SEGMENTS is not set
-LDSO_LDD_SUPPORT=y
-LDSO_CACHE_SUPPORT=y
-# LDSO_PRELOAD_FILE_SUPPORT is not set
-LDSO_BASE_FILENAME="ld.so"
-# UCLIBC_STATIC_LDCONFIG is not set
-LDSO_RUNPATH=y
-UCLIBC_CTOR_DTOR=y
-# LDSO_GNU_HASH_SUPPORT is not set
-# HAS_NO_THREADS is not set
-UCLIBC_HAS_THREADS=y
-PTHREADS_DEBUG_SUPPORT=y
-LINUXTHREADS_OLD=y
-UCLIBC_HAS_SYSLOG=y
-UCLIBC_HAS_LFS=y
-# MALLOC is not set
-# MALLOC_SIMPLE is not set
-MALLOC_STANDARD=y
-MALLOC_GLIBC_COMPAT=y
-UCLIBC_DYNAMIC_ATEXIT=y
-COMPAT_ATEXIT=y
-UCLIBC_SUSV3_LEGACY=y
-# UCLIBC_SUSV3_LEGACY_MACROS is not set
-# UCLIBC_HAS_STUBS is not set
-UCLIBC_HAS_SHADOW=y
-UCLIBC_HAS_PROGRAM_INVOCATION_NAME=y
-UCLIBC_HAS___PROGNAME=y
-UCLIBC_HAS_PTY=y
-ASSUME_DEVPTS=y
-UNIX98PTY_ONLY=y
-# UCLIBC_HAS_GETPT is not set
-UCLIBC_HAS_TM_EXTENSIONS=y
-UCLIBC_HAS_TZ_CACHING=y
-UCLIBC_HAS_TZ_FILE=y
-UCLIBC_HAS_TZ_FILE_READ_MANY=y
-UCLIBC_TZ_FILE_PATH="/etc/TZ"
-
-#
-# Advanced Library Settings
-#
-UCLIBC_PWD_BUFFER_SIZE=256
-UCLIBC_GRP_BUFFER_SIZE=256
-
-#
-# Support various families of functions
-#
-# UCLIBC_LINUX_MODULE_24 is not set
-UCLIBC_LINUX_SPECIFIC=y
-UCLIBC_HAS_GNU_ERROR=y
-UCLIBC_BSD_SPECIFIC=y
-UCLIBC_HAS_BSD_ERR=y
-# UCLIBC_HAS_OBSOLETE_BSD_SIGNAL is not set
-# UCLIBC_HAS_OBSOLETE_SYSV_SIGNAL is not set
-# UCLIBC_NTP_LEGACY is not set
-# UCLIBC_SV4_DEPRECATED is not set
-UCLIBC_HAS_REALTIME=y
-UCLIBC_HAS_ADVANCED_REALTIME=y
-UCLIBC_HAS_EPOLL=y
-UCLIBC_HAS_XATTR=y
-# UCLIBC_HAS_PROFILING is not set
-UCLIBC_HAS_CRYPT_IMPL=y
-UCLIBC_HAS_CRYPT=y
-UCLIBC_HAS_NETWORK_SUPPORT=y
-UCLIBC_HAS_SOCKET=y
-UCLIBC_HAS_IPV4=y
-UCLIBC_HAS_IPV6=y
-UCLIBC_HAS_RPC=y
-UCLIBC_HAS_FULL_RPC=y
-UCLIBC_HAS_REENTRANT_RPC=y
-UCLIBC_USE_NETLINK=y
-UCLIBC_SUPPORT_AI_ADDRCONFIG=y
-UCLIBC_HAS_BSD_RES_CLOSE=y
-
-#
-# String and Stdio Support
-#
-UCLIBC_HAS_STRING_GENERIC_OPT=y
-UCLIBC_HAS_STRING_ARCH_OPT=y
-UCLIBC_HAS_CTYPE_TABLES=y
-UCLIBC_HAS_CTYPE_SIGNED=y
-# UCLIBC_HAS_CTYPE_UNSAFE is not set
-UCLIBC_HAS_CTYPE_CHECKED=y
-# UCLIBC_HAS_CTYPE_ENFORCED is not set
-UCLIBC_HAS_WCHAR=y
-# UCLIBC_HAS_LOCALE is not set
-UCLIBC_HAS_HEXADECIMAL_FLOATS=y
-UCLIBC_HAS_GLIBC_CUSTOM_PRINTF=y
-UCLIBC_PRINTF_SCANF_POSITIONAL_ARGS=9
-UCLIBC_HAS_SCANF_GLIBC_A_FLAG=y
-# UCLIBC_HAS_STDIO_BUFSIZ_NONE is not set
-# UCLIBC_HAS_STDIO_BUFSIZ_256 is not set
-# UCLIBC_HAS_STDIO_BUFSIZ_512 is not set
-# UCLIBC_HAS_STDIO_BUFSIZ_1024 is not set
-# UCLIBC_HAS_STDIO_BUFSIZ_2048 is not set
-UCLIBC_HAS_STDIO_BUFSIZ_4096=y
-# UCLIBC_HAS_STDIO_BUFSIZ_8192 is not set
-UCLIBC_HAS_STDIO_BUILTIN_BUFFER_NONE=y
-# UCLIBC_HAS_STDIO_BUILTIN_BUFFER_4 is not set
-# UCLIBC_HAS_STDIO_BUILTIN_BUFFER_8 is not set
-# UCLIBC_HAS_STDIO_SHUTDOWN_ON_ABORT is not set
-UCLIBC_HAS_STDIO_GETC_MACRO=y
-UCLIBC_HAS_STDIO_PUTC_MACRO=y
-UCLIBC_HAS_STDIO_AUTO_RW_TRANSITION=y
-# UCLIBC_HAS_FOPEN_LARGEFILE_MODE is not set
-UCLIBC_HAS_FOPEN_EXCLUSIVE_MODE=y
-UCLIBC_HAS_GLIBC_CUSTOM_STREAMS=y
-UCLIBC_HAS_PRINTF_M_SPEC=y
-UCLIBC_HAS_ERRNO_MESSAGES=y
-# UCLIBC_HAS_SYS_ERRLIST is not set
-UCLIBC_HAS_SIGNUM_MESSAGES=y
-# UCLIBC_HAS_SYS_SIGLIST is not set
-UCLIBC_HAS_GNU_GETOPT=y
-UCLIBC_HAS_GNU_GETSUBOPT=y
-
-#
-# Big and Tall
-#
-UCLIBC_HAS_REGEX=y
-UCLIBC_HAS_REGEX_OLD=y
-UCLIBC_HAS_FNMATCH=y
-UCLIBC_HAS_FNMATCH_OLD=y
-UCLIBC_HAS_WORDEXP=y
-UCLIBC_HAS_FTW=y
-UCLIBC_HAS_GLOB=y
-UCLIBC_HAS_GNU_GLOB=y
-
-#
-# Library Installation Options
-#
-SHARED_LIB_LOADER_PREFIX="/lib"
-RUNTIME_PREFIX="/"
-DEVEL_PREFIX="/usr/"
-
-#
-# Security options
-#
-# UCLIBC_BUILD_PIE is not set
-UCLIBC_HAS_ARC4RANDOM=y
-# HAVE_NO_SSP is not set
-# UCLIBC_HAS_SSP is not set
-UCLIBC_BUILD_RELRO=y
-# UCLIBC_BUILD_NOW is not set
-UCLIBC_BUILD_NOEXECSTACK=y
-
-#
-# uClibc development/debugging options
-#
-CROSS_COMPILER_PREFIX=""
-UCLIBC_EXTRA_CFLAGS=""
-# DODEBUG is not set
-# DODEBUG_PT is not set
-DOSTRIP=y
-# DOASSERTS is not set
-# SUPPORT_LD_DEBUG is not set
-# SUPPORT_LD_DEBUG_EARLY is not set
-# UCLIBC_MALLOC_DEBUGGING is not set
-WARNINGS="-Wall"
-# EXTRA_WARNINGS is not set
-# DOMULTI is not set
-# UCLIBC_MJN3_ONLY is not set