diff options
| author | Waldemar Brodkorb <wbx@openadk.org> | 2010-11-13 00:30:49 +0100 |
|---|---|---|
| committer | Waldemar Brodkorb <wbx@openadk.org> | 2010-11-13 00:30:49 +0100 |
| commit | b6a5c9e0b1ed79e56e7dc8b3a0b2a61856fda576 (patch) | |
| tree | 622172c6d4fba89038c9f92d12085fce72268259 /target/wag54g | |
| parent | 4129680028eaddf98219126f787b08551bbf7088 (diff) | |
unify alix support
add hardware profiles for 3 alix boards, but use the same toolchain
for all of them. This is just better for maintenance purpose.
delete old targets.
Diffstat (limited to 'target/wag54g')
| -rw-r--r-- | target/wag54g/Makefile | 47 | ||||
| -rw-r--r-- | target/wag54g/files/etc/inittab | 3 | ||||
| -rw-r--r-- | target/wag54g/files/etc/mdev.conf | 10 | ||||
| -rw-r--r-- | target/wag54g/kernel.config | 899 | ||||
| -rw-r--r-- | target/wag54g/patches/ar7.patch | 4501 | ||||
| -rw-r--r-- | target/wag54g/target.mk | 7 | ||||
| -rw-r--r-- | target/wag54g/tools/addpattern/Makefile | 4 | ||||
| -rw-r--r-- | target/wag54g/tools/addpattern/addpattern.c | 255 | ||||
| -rw-r--r-- | target/wag54g/tools/rules.mk | 9 | ||||
| -rw-r--r-- | target/wag54g/tools/squashfs/Makefile | 27 | ||||
| -rw-r--r-- | target/wag54g/tools/srec2bin/Makefile | 4 | ||||
| -rw-r--r-- | target/wag54g/tools/srec2bin/srec2bin.c | 524 | ||||
| -rw-r--r-- | target/wag54g/uclibc.config | 233 |
13 files changed, 0 insertions, 6523 deletions
diff --git a/target/wag54g/Makefile b/target/wag54g/Makefile deleted file mode 100644 index 0a864ad4c..000000000 --- a/target/wag54g/Makefile +++ /dev/null @@ -1,47 +0,0 @@ -# This file is part of the OpenADK project. OpenADK is copyrighted -# material, please see the LICENCE file in the top-level directory. - -include $(TOPDIR)/rules.mk -include $(TOPDIR)/mk/kernel.mk -include $(TOPDIR)/mk/modules.mk -include $(TOPDIR)/mk/kernel-build.mk -include $(TOPDIR)/mk/image.mk - -$(TOOLS_BUILD_DIR): - mkdir -p $(TOOLS_BUILD_DIR) - -tools-compile: $(TOOLS_BUILD_DIR) - $(MAKE) -C tools/addpattern - $(MAKE) -C tools/srec2bin - $(MAKE) -C ../tools/squashfs prepare compile install - -kernel-install: tools-compile - PATH='${TARGET_PATH}' \ - $(TARGET_CROSS)objcopy -S -O srec $(LINUX_DIR)/vmlinux \ - $(LINUX_DIR)/vmlinux.srec - PATH='${TARGET_PATH}' \ - srec2bin $(LINUX_DIR)/vmlinux.srec $(LINUX_DIR)/vmlinux.bin - (dd if=/dev/zero bs=16 count=1; cat $(LINUX_DIR)/vmlinux.bin) > \ - $(LINUX_DIR)/vmlinux.tmp - PATH='${TARGET_PATH}' \ - addpattern -p WA21 -i $(LINUX_DIR)/vmlinux.tmp \ - -o $(BIN_DIR)/${ADK_TARGET}-${FS}-kernel - -ifeq ($(FS),squashfs) -imageinstall: kernel-install $(BIN_DIR)/$(ROOTFSSQUASHFS) - ${CP} ${BUILD_DIR}/${ROOTFSSQUASHFS} $(BIN_DIR)/$(ROOTFSSQUASHFS) - @echo The image file is $(ROOTFSSQUASHFS) - @echo 'You can flash the image via tftp:' - @echo 'tftp 192.168.1.1' - @echo 'tftp> binary' - @echo "tftp> put $(ROOTFSSQUASHFS) upgrade_code.bin" -endif -ifeq ($(FS),nfsroot) -imageinstall: kernel-install $(BIN_DIR)/$(ROOTFSTARBALL) - @echo 'The kernel file is: ${BIN_DIR}/${ADK_TARGET}-${FS}-kernel' - @echo 'The nfs root tarball is: ${BIN_DIR}/${ROOTFSTARBALL}' - @echo 'You can flash the kernel via tftp:' - @echo 'tftp 192.168.1.1' - @echo 'tftp> binary' - @echo 'tftp> put ${ADK_TARGET}-${FS}-kernel upgrade_code.bin' -endif diff --git a/target/wag54g/files/etc/inittab b/target/wag54g/files/etc/inittab deleted file mode 100644 index 4566ae3e8..000000000 --- a/target/wag54g/files/etc/inittab +++ /dev/null @@ -1,3 +0,0 @@ -::sysinit:/etc/init.d/rcS -::shutdown:/etc/init.d/rcK -ttyS0::respawn:/sbin/getty -i -L ttyS0 38400 vt100 diff --git a/target/wag54g/files/etc/mdev.conf b/target/wag54g/files/etc/mdev.conf deleted file mode 100644 index 582a7b43f..000000000 --- a/target/wag54g/files/etc/mdev.conf +++ /dev/null @@ -1,10 +0,0 @@ -tun 0:0 660 >net/tun -device-mapper 0:0 660 @mkdir /dev/mapper -null 0:0 777 -zero 0:0 666 -u?random 0:0 644 -console 0:0 0600 -ptmx 0:0 666 -tty 0:0 666 -ttyS* 0:0 640 -.* 0:0 644 @/lib/mdev/init diff --git a/target/wag54g/kernel.config b/target/wag54g/kernel.config deleted file mode 100644 index 53e5cb313..000000000 --- a/target/wag54g/kernel.config +++ /dev/null @@ -1,899 +0,0 @@ -# -# Automatically generated make config: don't edit -# Linux kernel version: 2.6.30.5 -# Thu Aug 27 22:00:41 2009 -# -CONFIG_MIPS=y - -# -# Machine selection -# -CONFIG_AR7=y -# CONFIG_MACH_ALCHEMY is not set -# CONFIG_BASLER_EXCITE is not set -# CONFIG_BCM47XX is not set -# CONFIG_MIPS_COBALT is not set -# CONFIG_MACH_DECSTATION is not set -# CONFIG_MACH_JAZZ is not set -# CONFIG_LASAT is not set -# CONFIG_LEMOTE_FULONG is not set -# CONFIG_MIPS_MALTA is not set -# CONFIG_MIPS_SIM is not set -# CONFIG_NEC_MARKEINS is not set -# CONFIG_MACH_VR41XX is not set -# CONFIG_NXP_STB220 is not set -# CONFIG_NXP_STB225 is not set -# CONFIG_PNX8550_JBS is not set -# CONFIG_PNX8550_STB810 is not set -# CONFIG_PMC_MSP is not set -# CONFIG_PMC_YOSEMITE is not set -# CONFIG_SGI_IP22 is not set -# CONFIG_SGI_IP27 is not set -# CONFIG_SGI_IP28 is not set -# CONFIG_SGI_IP32 is not set -# CONFIG_SIBYTE_CRHINE is not set -# CONFIG_SIBYTE_CARMEL is not set -# CONFIG_SIBYTE_CRHONE is not set -# CONFIG_SIBYTE_RHONE is not set -# CONFIG_SIBYTE_SWARM is not set -# CONFIG_SIBYTE_LITTLESUR is not set -# CONFIG_SIBYTE_SENTOSA is not set -# CONFIG_SIBYTE_BIGSUR is not set -# CONFIG_SNI_RM is not set -# CONFIG_MACH_TX39XX is not set -# CONFIG_MACH_TX49XX is not set -# CONFIG_MIKROTIK_RB532 is not set -# CONFIG_WR_PPMC is not set -# CONFIG_CAVIUM_OCTEON_SIMULATOR is not set -# CONFIG_CAVIUM_OCTEON_REFERENCE_BOARD is not set -CONFIG_RWSEM_GENERIC_SPINLOCK=y -# CONFIG_ARCH_HAS_ILOG2_U32 is not set -# CONFIG_ARCH_HAS_ILOG2_U64 is not set -CONFIG_ARCH_SUPPORTS_OPROFILE=y -CONFIG_GENERIC_FIND_NEXT_BIT=y -CONFIG_GENERIC_HWEIGHT=y -CONFIG_GENERIC_CALIBRATE_DELAY=y -CONFIG_GENERIC_CLOCKEVENTS=y -CONFIG_GENERIC_TIME=y -CONFIG_GENERIC_CMOS_UPDATE=y -CONFIG_SCHED_OMIT_FRAME_POINTER=y -CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y -CONFIG_CEVT_R4K_LIB=y -CONFIG_CEVT_R4K=y -CONFIG_CSRC_R4K_LIB=y -CONFIG_CSRC_R4K=y -CONFIG_DMA_NONCOHERENT=y -CONFIG_DMA_NEED_PCI_MAP_STATE=y -CONFIG_EARLY_PRINTK=y -CONFIG_SYS_HAS_EARLY_PRINTK=y -# CONFIG_HOTPLUG_CPU is not set -# CONFIG_NO_IOPORT is not set -CONFIG_GENERIC_GPIO=y -# CONFIG_CPU_BIG_ENDIAN is not set -CONFIG_CPU_LITTLE_ENDIAN=y -CONFIG_SYS_SUPPORTS_BIG_ENDIAN=y -CONFIG_SYS_SUPPORTS_LITTLE_ENDIAN=y -CONFIG_IRQ_CPU=y -CONFIG_SWAP_IO_SPACE=y -CONFIG_BOOT_ELF32=y -CONFIG_MIPS_L1_CACHE_SHIFT=5 - -# -# CPU selection -# -# CONFIG_CPU_LOONGSON2 is not set -CONFIG_CPU_MIPS32_R1=y -# CONFIG_CPU_MIPS32_R2 is not set -# CONFIG_CPU_MIPS64_R1 is not set -# CONFIG_CPU_MIPS64_R2 is not set -# CONFIG_CPU_R3000 is not set -# CONFIG_CPU_TX39XX is not set -# CONFIG_CPU_VR41XX is not set -# CONFIG_CPU_R4300 is not set -# CONFIG_CPU_R4X00 is not set -# CONFIG_CPU_TX49XX is not set -# CONFIG_CPU_R5000 is not set -# CONFIG_CPU_R5432 is not set -# CONFIG_CPU_R5500 is not set -# CONFIG_CPU_R6000 is not set -# CONFIG_CPU_NEVADA is not set -# CONFIG_CPU_R8000 is not set -# CONFIG_CPU_R10000 is not set -# CONFIG_CPU_RM7000 is not set -# CONFIG_CPU_RM9000 is not set -# CONFIG_CPU_SB1 is not set -# CONFIG_CPU_CAVIUM_OCTEON is not set -CONFIG_SYS_HAS_CPU_MIPS32_R1=y -CONFIG_CPU_MIPS32=y -CONFIG_CPU_MIPSR1=y -CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y -CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y -CONFIG_HARDWARE_WATCHPOINTS=y - -# -# Kernel type -# -CONFIG_32BIT=y -# CONFIG_64BIT is not set -CONFIG_PAGE_SIZE_4KB=y -# CONFIG_PAGE_SIZE_8KB is not set -# CONFIG_PAGE_SIZE_16KB is not set -# CONFIG_PAGE_SIZE_32KB is not set -# CONFIG_PAGE_SIZE_64KB is not set -CONFIG_CPU_HAS_PREFETCH=y -CONFIG_MIPS_MT_DISABLED=y -# CONFIG_MIPS_MT_SMP is not set -# CONFIG_MIPS_MT_SMTC is not set -CONFIG_CPU_HAS_LLSC=y -CONFIG_CPU_HAS_SYNC=y -CONFIG_GENERIC_HARDIRQS=y -CONFIG_GENERIC_IRQ_PROBE=y -CONFIG_CPU_SUPPORTS_HIGHMEM=y -CONFIG_ARCH_FLATMEM_ENABLE=y -CONFIG_ARCH_POPULATES_NODE_MAP=y -CONFIG_SELECT_MEMORY_MODEL=y -CONFIG_FLATMEM_MANUAL=y -# CONFIG_DISCONTIGMEM_MANUAL is not set -# CONFIG_SPARSEMEM_MANUAL is not set -CONFIG_FLATMEM=y -CONFIG_FLAT_NODE_MEM_MAP=y -CONFIG_PAGEFLAGS_EXTENDED=y -CONFIG_SPLIT_PTLOCK_CPUS=4 -# CONFIG_PHYS_ADDR_T_64BIT is not set -CONFIG_ZONE_DMA_FLAG=0 -CONFIG_VIRT_TO_BUS=y -# CONFIG_UNEVICTABLE_LRU is not set -CONFIG_HAVE_MLOCK=y -CONFIG_DEFAULT_MMAP_MIN_ADDR=4096 -CONFIG_TICK_ONESHOT=y -# CONFIG_NO_HZ is not set -CONFIG_HIGH_RES_TIMERS=y -CONFIG_GENERIC_CLOCKEVENTS_BUILD=y -# CONFIG_HZ_48 is not set -CONFIG_HZ_100=y -# CONFIG_HZ_128 is not set -# CONFIG_HZ_250 is not set -# CONFIG_HZ_256 is not set -# CONFIG_HZ_1000 is not set -# CONFIG_HZ_1024 is not set -CONFIG_SYS_SUPPORTS_ARBIT_HZ=y -CONFIG_HZ=100 -CONFIG_PREEMPT_NONE=y -# CONFIG_PREEMPT_VOLUNTARY is not set -# CONFIG_PREEMPT is not set -# CONFIG_KEXEC is not set -# CONFIG_SECCOMP is not set -CONFIG_LOCKDEP_SUPPORT=y -CONFIG_STACKTRACE_SUPPORT=y -CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" - -# -# General setup -# -CONFIG_EXPERIMENTAL=y -CONFIG_BROKEN_ON_SMP=y -CONFIG_INIT_ENV_ARG_LIMIT=32 -CONFIG_LOCALVERSION="" -# CONFIG_LOCALVERSION_AUTO is not set -# CONFIG_SWAP is not set -CONFIG_SYSVIPC=y -CONFIG_SYSVIPC_SYSCTL=y -CONFIG_POSIX_MQUEUE=y -CONFIG_POSIX_MQUEUE_SYSCTL=y -# CONFIG_BSD_PROCESS_ACCT is not set -# CONFIG_TASKSTATS is not set -# CONFIG_AUDIT is not set - -# -# RCU Subsystem -# -CONFIG_CLASSIC_RCU=y -# CONFIG_TREE_RCU is not set -# CONFIG_PREEMPT_RCU is not set -# CONFIG_TREE_RCU_TRACE is not set -# CONFIG_PREEMPT_RCU_TRACE is not set -# CONFIG_IKCONFIG is not set -CONFIG_LOG_BUF_SHIFT=14 -# CONFIG_GROUP_SCHED is not set -# CONFIG_CGROUPS is not set -# CONFIG_SYSFS_DEPRECATED_V2 is not set -# CONFIG_RELAY is not set -# CONFIG_NAMESPACES is not set -# CONFIG_BLK_DEV_INITRD is not set -CONFIG_CC_OPTIMIZE_FOR_SIZE=y -CONFIG_SYSCTL=y -CONFIG_ANON_INODES=y -CONFIG_EMBEDDED=y -CONFIG_SYSCTL_SYSCALL=y -CONFIG_KALLSYMS=y -# CONFIG_KALLSYMS_EXTRA_PASS is not set -# CONFIG_STRIP_ASM_SYMS is not set -CONFIG_HOTPLUG=y -CONFIG_PRINTK=y -CONFIG_BUG=y -# CONFIG_ELF_CORE is not set -# CONFIG_PCSPKR_PLATFORM is not set -CONFIG_BASE_FULL=y -# CONFIG_FUTEX is not set -CONFIG_EPOLL=y -CONFIG_SIGNALFD=y -CONFIG_TIMERFD=y -CONFIG_EVENTFD=y -CONFIG_SHMEM=y -# CONFIG_AIO is not set -# CONFIG_VM_EVENT_COUNTERS is not set -# CONFIG_COMPAT_BRK is not set -CONFIG_SLAB=y -# CONFIG_SLUB is not set -# CONFIG_SLOB is not set -# CONFIG_PROFILING is not set -# CONFIG_MARKERS is not set -CONFIG_HAVE_OPROFILE=y -# CONFIG_SLOW_WORK is not set -# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set -CONFIG_SLABINFO=y -CONFIG_BASE_SMALL=0 -CONFIG_MODULES=y -# CONFIG_MODULE_FORCE_LOAD is not set -CONFIG_MODULE_UNLOAD=y -# CONFIG_MODULE_FORCE_UNLOAD is not set -# CONFIG_MODVERSIONS is not set -# CONFIG_MODULE_SRCVERSION_ALL is not set -CONFIG_BLOCK=y -# CONFIG_LBD is not set -# CONFIG_BLK_DEV_BSG is not set -# CONFIG_BLK_DEV_INTEGRITY is not set - -# -# IO Schedulers -# -CONFIG_IOSCHED_NOOP=y -CONFIG_IOSCHED_AS=y -CONFIG_IOSCHED_DEADLINE=y -CONFIG_IOSCHED_CFQ=y -# CONFIG_DEFAULT_AS is not set -# CONFIG_DEFAULT_DEADLINE is not set -CONFIG_DEFAULT_CFQ=y -# CONFIG_DEFAULT_NOOP is not set -CONFIG_DEFAULT_IOSCHED="cfq" -# CONFIG_FREEZER is not set - -# -# Bus options (PCI, PCMCIA, EISA, ISA, TC) -# -# CONFIG_ARCH_SUPPORTS_MSI is not set -CONFIG_MMU=y -# CONFIG_PCCARD is not set - -# -# Executable file formats -# -CONFIG_BINFMT_ELF=y -# CONFIG_HAVE_AOUT is not set -# CONFIG_BINFMT_MISC is not set -CONFIG_TRAD_SIGNALS=y - -# -# Power management options -# -CONFIG_ARCH_SUSPEND_POSSIBLE=y -# CONFIG_PM is not set -CONFIG_NET=y - -# -# Networking options -# -CONFIG_PACKET=y -CONFIG_PACKET_MMAP=y -CONFIG_UNIX=y -# CONFIG_NET_KEY is not set -CONFIG_INET=y -CONFIG_IP_MULTICAST=y -CONFIG_IP_ADVANCED_ROUTER=y -CONFIG_ASK_IP_FIB_HASH=y -# CONFIG_IP_FIB_TRIE is not set -CONFIG_IP_FIB_HASH=y -# CONFIG_IP_MULTIPLE_TABLES is not set -# CONFIG_IP_ROUTE_MULTIPATH is not set -# CONFIG_IP_ROUTE_VERBOSE is not set -# CONFIG_IP_PNP is not set -# CONFIG_NET_IPIP is not set -# CONFIG_NET_IPGRE is not set -# CONFIG_IP_MROUTE is not set -# CONFIG_ARPD is not set -CONFIG_SYN_COOKIES=y -# CONFIG_INET_AH is not set -# CONFIG_INET_ESP is not set -# CONFIG_INET_IPCOMP is not set -# CONFIG_INET_XFRM_TUNNEL is not set -# CONFIG_INET_TUNNEL is not set -# CONFIG_INET_XFRM_MODE_TRANSPORT is not set -# CONFIG_INET_XFRM_MODE_TUNNEL is not set -# CONFIG_INET_XFRM_MODE_BEET is not set -# CONFIG_INET_LRO is not set -CONFIG_INET_DIAG=y -CONFIG_INET_TCP_DIAG=y -# CONFIG_TCP_CONG_ADVANCED is not set -CONFIG_TCP_CONG_CUBIC=y -CONFIG_DEFAULT_TCP_CONG="cubic" -# CONFIG_TCP_MD5SIG is not set -# CONFIG_IPV6 is not set -# CONFIG_NETWORK_SECMARK is not set -# CONFIG_NETFILTER is not set -# CONFIG_IP_DCCP is not set -# CONFIG_IP_SCTP is not set -# CONFIG_TIPC is not set -# CONFIG_ATM is not set -# CONFIG_BRIDGE is not set -# CONFIG_NET_DSA is not set -# CONFIG_VLAN_8021Q is not set -# CONFIG_DECNET is not set -# CONFIG_LLC2 is not set -# CONFIG_IPX is not set -# CONFIG_ATALK is not set -# CONFIG_X25 is not set -# CONFIG_LAPB is not set -# CONFIG_ECONET is not set -# CONFIG_WAN_ROUTER is not set -# CONFIG_PHONET is not set -# CONFIG_NET_SCHED is not set -# CONFIG_DCB is not set - -# -# Network testing -# -# CONFIG_NET_PKTGEN is not set -# CONFIG_HAMRADIO is not set -# CONFIG_CAN is not set -# CONFIG_IRDA is not set -# CONFIG_BT is not set -# CONFIG_AF_RXRPC is not set -CONFIG_WIRELESS=y -# CONFIG_CFG80211 is not set -CONFIG_WIRELESS_OLD_REGULATORY=y -# CONFIG_WIRELESS_EXT is not set -# CONFIG_LIB80211 is not set -# CONFIG_MAC80211 is not set -# CONFIG_WIMAX is not set -# CONFIG_RFKILL is not set -# CONFIG_NET_9P is not set - -# -# Device Drivers -# - -# -# Generic Driver Options -# -CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" -CONFIG_STANDALONE=y -# CONFIG_PREVENT_FIRMWARE_BUILD is not set -# CONFIG_FW_LOADER is not set -# CONFIG_SYS_HYPERVISOR is not set -# CONFIG_CONNECTOR is not set -CONFIG_MTD=y -# CONFIG_MTD_DEBUG is not set -# CONFIG_MTD_CONCAT is not set -CONFIG_MTD_PARTITIONS=y -# CONFIG_MTD_TESTS is not set -CONFIG_MTD_ROOTFS_ROOT_DEV=y -# CONFIG_MTD_REDBOOT_PARTS is not set -# CONFIG_MTD_CMDLINE_PARTS is not set -CONFIG_MTD_AR7_PARTS=y - -# -# User Modules And Translation Layers -# -CONFIG_MTD_CHAR=y -CONFIG_MTD_BLKDEVS=y -CONFIG_MTD_BLOCK=y -# CONFIG_FTL is not set -# CONFIG_NFTL is not set -# CONFIG_INFTL is not set -# CONFIG_RFD_FTL is not set -# CONFIG_SSFDC is not set -# CONFIG_MTD_OOPS is not set - -# -# RAM/ROM/Flash chip drivers -# -CONFIG_MTD_CFI=y -# CONFIG_MTD_JEDECPROBE is not set -CONFIG_MTD_GEN_PROBE=y -# CONFIG_MTD_CFI_ADV_OPTIONS is not set -CONFIG_MTD_MAP_BANK_WIDTH_1=y -CONFIG_MTD_MAP_BANK_WIDTH_2=y -CONFIG_MTD_MAP_BANK_WIDTH_4=y -# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set -# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set -# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set -CONFIG_MTD_CFI_I1=y -CONFIG_MTD_CFI_I2=y -# CONFIG_MTD_CFI_I4 is not set -# CONFIG_MTD_CFI_I8 is not set -# CONFIG_MTD_CFI_INTELEXT is not set -CONFIG_MTD_CFI_AMDSTD=y -# CONFIG_MTD_CFI_STAA is not set -CONFIG_MTD_CFI_UTIL=y -# CONFIG_MTD_RAM is not set -# CONFIG_MTD_ROM is not set -# CONFIG_MTD_ABSENT is not set - -# -# Mapping drivers for chip access -# -CONFIG_MTD_COMPLEX_MAPPINGS=y -CONFIG_MTD_PHYSMAP=y -# CONFIG_MTD_PHYSMAP_COMPAT is not set -# CONFIG_MTD_PLATRAM is not set - -# -# Self-contained MTD device drivers -# -# CONFIG_MTD_SLRAM is not set -# CONFIG_MTD_PHRAM is not set -# CONFIG_MTD_MTDRAM is not set -# CONFIG_MTD_BLOCK2MTD is not set - -# -# Disk-On-Chip Device Drivers -# -# CONFIG_MTD_DOC2000 is not set -# CONFIG_MTD_DOC2001 is not set -# CONFIG_MTD_DOC2001PLUS is not set -# CONFIG_MTD_NAND is not set -# CONFIG_MTD_ONENAND is not set - -# -# LPDDR flash memory drivers -# -# CONFIG_MTD_LPDDR is not set - -# -# UBI - Unsorted block images -# -# CONFIG_MTD_UBI is not set -# CONFIG_PARPORT is not set -CONFIG_BLK_DEV=y -# CONFIG_BLK_DEV_COW_COMMON is not set -# CONFIG_BLK_DEV_LOOP is not set -# CONFIG_BLK_DEV_NBD is not set -# CONFIG_BLK_DEV_RAM is not set -# CONFIG_CDROM_PKTCDVD is not set -# CONFIG_ATA_OVER_ETH is not set -# CONFIG_BLK_DEV_HD is not set -# CONFIG_MISC_DEVICES is not set -CONFIG_HAVE_IDE=y -# CONFIG_IDE is not set - -# -# SCSI device support -# -# CONFIG_RAID_ATTRS is not set -# CONFIG_SCSI is not set -# CONFIG_SCSI_DMA is not set -# CONFIG_SCSI_NETLINK is not set -# CONFIG_ATA is not set -# CONFIG_MD is not set -CONFIG_NETDEVICES=y -CONFIG_COMPAT_NET_DEV_OPS=y -# CONFIG_DUMMY is not set -# CONFIG_BONDING is not set -# CONFIG_MACVLAN is not set -# CONFIG_EQUALIZER is not set -# CONFIG_TUN is not set -# CONFIG_VETH is not set -CONFIG_PHYLIB=y -# CONFIG_SWCONFIG is not set - -# -# MII PHY device drivers -# -# CONFIG_MARVELL_PHY is not set -# CONFIG_DAVICOM_PHY is not set -# CONFIG_QSEMI_PHY is not set -# CONFIG_LXT_PHY is not set -# CONFIG_CICADA_PHY is not set -# CONFIG_VITESSE_PHY is not set -# CONFIG_SMSC_PHY is not set -# CONFIG_BROADCOM_PHY is not set -# CONFIG_ICPLUS_PHY is not set -# CONFIG_REALTEK_PHY is not set -# CONFIG_NATIONAL_PHY is not set -# CONFIG_STE10XP is not set -# CONFIG_LSI_ET1011C_PHY is not set -CONFIG_FIXED_PHY=y -# CONFIG_MDIO_BITBANG is not set -CONFIG_NET_ETHERNET=y -CONFIG_MII=y -# CONFIG_AX88796 is not set -# CONFIG_SMC91X is not set -# CONFIG_DM9000 is not set -# CONFIG_ETHOC is not set -# CONFIG_DNET is not set -# CONFIG_IBM_NEW_EMAC_ZMII is not set -# CONFIG_IBM_NEW_EMAC_RGMII is not set -# CONFIG_IBM_NEW_EMAC_TAH is not set -# CONFIG_IBM_NEW_EMAC_EMAC4 is not set -# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set -# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set -# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set -# CONFIG_B44 is not set -CONFIG_CPMAC=y -# CONFIG_NETDEV_1000 is not set -# CONFIG_NETDEV_10000 is not set - -# -# Wireless LAN -# -# CONFIG_WLAN_PRE80211 is not set -# CONFIG_WLAN_80211 is not set - -# -# Enable WiMAX (Networking options) to see the WiMAX drivers -# -# CONFIG_WAN is not set -# CONFIG_PPP is not set -# CONFIG_SLIP is not set -# CONFIG_NETCONSOLE is not set -# CONFIG_NETPOLL is not set -# CONFIG_NET_POLL_CONTROLLER is not set -# CONFIG_ISDN is not set -# CONFIG_PHONE is not set - -# -# Input device support -# -# CONFIG_INPUT is not set - -# -# Hardware I/O ports -# -# CONFIG_SERIO is not set -# CONFIG_GAMEPORT is not set - -# -# Character devices -# -# CONFIG_VT is not set -# CONFIG_DEVKMEM is not set -# CONFIG_SERIAL_NONSTANDARD is not set - -# -# Serial drivers -# -CONFIG_SERIAL_8250=y -CONFIG_SERIAL_8250_CONSOLE=y -CONFIG_SERIAL_8250_NR_UARTS=4 -CONFIG_SERIAL_8250_RUNTIME_UARTS=4 -# CONFIG_SERIAL_8250_EXTENDED is not set - -# -# Non-8250 serial port support -# -CONFIG_SERIAL_CORE=y -CONFIG_SERIAL_CORE_CONSOLE=y -CONFIG_UNIX98_PTYS=y -# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set -# CONFIG_LEGACY_PTYS is not set -# CONFIG_IPMI_HANDLER is not set -# CONFIG_HW_RANDOM is not set -# CONFIG_R3964 is not set -CONFIG_AR7_GPIO=y -# CONFIG_RAW_DRIVER is not set -# CONFIG_TCG_TPM is not set -# CONFIG_I2C is not set -# CONFIG_SPI is not set -# CONFIG_W1 is not set -# CONFIG_POWER_SUPPLY is not set -# CONFIG_HWMON is not set -# CONFIG_THERMAL is not set -# CONFIG_THERMAL_HWMON is not set -CONFIG_WATCHDOG=y -# CONFIG_WATCHDOG_NOWAYOUT is not set - -# -# Watchdog Device Drivers -# -# CONFIG_SOFT_WATCHDOG is not set -CONFIG_AR7_WDT=y -CONFIG_SSB_POSSIBLE=y - -# -# Sonics Silicon Backplane -# -# CONFIG_SSB is not set - -# -# Multifunction device drivers -# -# CONFIG_MFD_CORE is not set -# CONFIG_MFD_SM501 is not set -# CONFIG_HTC_PASIC3 is not set -# CONFIG_MFD_TMIO is not set -# CONFIG_REGULATOR is not set - -# -# Multimedia devices -# - -# -# Multimedia core support -# -# CONFIG_VIDEO_DEV is not set -# CONFIG_DVB_CORE is not set -# CONFIG_VIDEO_MEDIA is not set - -# -# Multimedia drivers -# -# CONFIG_DAB is not set - -# -# Graphics support -# -# CONFIG_VGASTATE is not set -# CONFIG_VIDEO_OUTPUT_CONTROL is not set -# CONFIG_FB is not set -# CONFIG_BACKLIGHT_LCD_SUPPORT is not set - -# -# Display device support -# -# CONFIG_DISPLAY_SUPPORT is not set -# CONFIG_SOUND is not set -# CONFIG_USB_SUPPORT is not set -# CONFIG_MMC is not set -# CONFIG_MEMSTICK is not set -# CONFIG_NEW_LEDS is not set -# CONFIG_ACCESSIBILITY is not set -CONFIG_RTC_LIB=y -# CONFIG_RTC_CLASS is not set -# CONFIG_DMADEVICES is not set -# CONFIG_AUXDISPLAY is not set -# CONFIG_UIO is not set - -# -# TI VLYNQ -# -CONFIG_VLYNQ=y -# CONFIG_STAGING is not set - -# -# File systems -# -# CONFIG_EXT2_FS is not set -# CONFIG_EXT3_FS is not set -# CONFIG_EXT4_FS is not set -# CONFIG_REISERFS_FS is not set -# CONFIG_JFS_FS is not set -# CONFIG_FS_POSIX_ACL is not set -# CONFIG_XFS_FS is not set -# CONFIG_OCFS2_FS is not set -# CONFIG_BTRFS_FS is not set -CONFIG_FILE_LOCKING=y -# CONFIG_DNOTIFY is not set -# CONFIG_INOTIFY is not set -# CONFIG_QUOTA is not set -# CONFIG_AUTOFS_FS is not set -# CONFIG_AUTOFS4_FS is not set -# CONFIG_FUSE_FS is not set - -# -# Caches -# -# CONFIG_FSCACHE is not set - -# -# CD-ROM/DVD Filesystems -# -# CONFIG_ISO9660_FS is not set -# CONFIG_UDF_FS is not set - -# -# DOS/FAT/NT Filesystems -# -# CONFIG_MSDOS_FS is not set -# CONFIG_VFAT_FS is not set -# CONFIG_NTFS_FS is not set - -# -# Pseudo filesystems -# -CONFIG_PROC_FS=y -# CONFIG_PROC_KCORE is not set -CONFIG_PROC_SYSCTL=y -# CONFIG_PROC_PAGE_MONITOR is not set -CONFIG_SYSFS=y -CONFIG_TMPFS=y -# CONFIG_TMPFS_POSIX_ACL is not set -# CONFIG_HUGETLB_PAGE is not set -# CONFIG_CONFIGFS_FS is not set -CONFIG_MISC_FILESYSTEMS=y -# CONFIG_ADFS_FS is not set -# CONFIG_AFFS_FS is not set -# CONFIG_HFS_FS is not set -# CONFIG_HFSPLUS_FS is not set -# CONFIG_BEFS_FS is not set -# CONFIG_BFS_FS is not set -# CONFIG_EFS_FS is not set -# CONFIG_YAFFS_FS is not set -# CONFIG_JFFS2_FS is not set -# CONFIG_CRAMFS is not set -# CONFIG_SQUASHFS is not set -# CONFIG_VXFS_FS is not set -# CONFIG_MINIX_FS is not set -# CONFIG_OMFS_FS is not set -# CONFIG_HPFS_FS is not set -# CONFIG_QNX4FS_FS is not set -# CONFIG_ROMFS_FS is not set -# CONFIG_SYSV_FS is not set -# CONFIG_UFS_FS is not set -# CONFIG_AUFS_FS is not set -# CONFIG_NILFS2_FS is not set -CONFIG_NETWORK_FILESYSTEMS=y -# CONFIG_NFS_FS is not set -# CONFIG_NFSD is not set -# CONFIG_SMB_FS is not set -# CONFIG_CIFS is not set -# CONFIG_NCP_FS is not set -# CONFIG_CODA_FS is not set -# CONFIG_AFS_FS is not set - -# -# Partition Types -# -# CONFIG_PARTITION_ADVANCED is not set -CONFIG_MSDOS_PARTITION=y -# CONFIG_NLS is not set -# CONFIG_DLM is not set - -# -# Kernel hacking -# -CONFIG_TRACE_IRQFLAGS_SUPPORT=y -CONFIG_PRINTK_TIME=y -# CONFIG_ENABLE_WARN_DEPRECATED is not set -# CONFIG_ENABLE_MUST_CHECK is not set -CONFIG_FRAME_WARN=1024 -CONFIG_MAGIC_SYSRQ=y -# CONFIG_UNUSED_SYMBOLS is not set -# CONFIG_DEBUG_FS is not set -# CONFIG_HEADERS_CHECK is not set -# CONFIG_DEBUG_KERNEL is not set -# CONFIG_DEBUG_MEMORY_INIT is not set -# CONFIG_RCU_CPU_STALL_DETECTOR is not set -# CONFIG_SYSCTL_SYSCALL_CHECK is not set -CONFIG_TRACING_SUPPORT=y - -# -# Tracers -# -# CONFIG_IRQSOFF_TRACER is not set -# CONFIG_SCHED_TRACER is not set -# CONFIG_CONTEXT_SWITCH_TRACER is not set -# CONFIG_EVENT_TRACER is not set -# CONFIG_BOOT_TRACER is not set -# CONFIG_TRACE_BRANCH_PROFILING is not set -# CONFIG_KMEMTRACE is not set -# CONFIG_WORKQUEUE_TRACER is not set -# CONFIG_BLK_DEV_IO_TRACE is not set -# CONFIG_SAMPLES is not set -CONFIG_HAVE_ARCH_KGDB=y -CONFIG_CMDLINE="console=ttyS0,38400" - -# -# Security options -# -# CONFIG_KEYS is not set -# CONFIG_SECURITY is not set -# CONFIG_SECURITYFS is not set -# CONFIG_SECURITY_FILE_CAPABILITIES is not set -CONFIG_CRYPTO=y - -# -# Crypto core or helper -# -# CONFIG_CRYPTO_FIPS is not set -# CONFIG_CRYPTO_MANAGER is not set -# CONFIG_CRYPTO_MANAGER2 is not set -# CONFIG_CRYPTO_GF128MUL is not set -# CONFIG_CRYPTO_NULL is not set -# CONFIG_CRYPTO_CRYPTD is not set -# CONFIG_CRYPTO_AUTHENC is not set -# CONFIG_CRYPTO_TEST is not set - -# -# Authenticated Encryption with Associated Data -# -# CONFIG_CRYPTO_CCM is not set -# CONFIG_CRYPTO_GCM is not set -# CONFIG_CRYPTO_SEQIV is not set - -# -# Block modes -# -# CONFIG_CRYPTO_CBC is not set -# CONFIG_CRYPTO_CTR is not set -# CONFIG_CRYPTO_CTS is not set -# CONFIG_CRYPTO_ECB is not set -# CONFIG_CRYPTO_LRW is not set -# CONFIG_CRYPTO_PCBC is not set -# CONFIG_CRYPTO_XTS is not set - -# -# Hash modes -# -# CONFIG_CRYPTO_HMAC is not set -# CONFIG_CRYPTO_XCBC is not set - -# -# Digest -# -# CONFIG_CRYPTO_CRC32C is not set -# CONFIG_CRYPTO_MD4 is not set -# CONFIG_CRYPTO_MD5 is not set -# CONFIG_CRYPTO_MICHAEL_MIC is not set -# CONFIG_CRYPTO_RMD128 is not set -# CONFIG_CRYPTO_RMD160 is not set -# CONFIG_CRYPTO_RMD256 is not set -# CONFIG_CRYPTO_RMD320 is not set -# CONFIG_CRYPTO_SHA1 is not set -# CONFIG_CRYPTO_SHA256 is not set -# CONFIG_CRYPTO_SHA512 is not set -# CONFIG_CRYPTO_TGR192 is not set -# CONFIG_CRYPTO_WP512 is not set - -# -# Ciphers -# -# CONFIG_CRYPTO_AES is not set -# CONFIG_CRYPTO_ANUBIS is not set -# CONFIG_CRYPTO_ARC4 is not set -# CONFIG_CRYPTO_BLOWFISH is not set -# CONFIG_CRYPTO_CAMELLIA is not set -# CONFIG_CRYPTO_CAST5 is not set -# CONFIG_CRYPTO_CAST6 is not set -# CONFIG_CRYPTO_DES is not set -# CONFIG_CRYPTO_FCRYPT is not set -# CONFIG_CRYPTO_KHAZAD is not set -# CONFIG_CRYPTO_SALSA20 is not set -# CONFIG_CRYPTO_SEED is not set -# CONFIG_CRYPTO_SERPENT is not set -# CONFIG_CRYPTO_TEA is not set -# CONFIG_CRYPTO_TWOFISH is not set - -# -# Compression -# -# CONFIG_CRYPTO_DEFLATE is not set -# CONFIG_CRYPTO_ZLIB is not set -# CONFIG_CRYPTO_LZO is not set - -# -# Random Number Generation -# -# CONFIG_CRYPTO_ANSI_CPRNG is not set -# CONFIG_CRYPTO_HW is not set - -# -# OCF Configuration -# -# CONFIG_OCF_OCF is not set -# CONFIG_BINARY_PRINTF is not set - -# -# Library routines -# -CONFIG_GENERIC_FIND_LAST_BIT=y -# CONFIG_CRC_CCITT is not set -# CONFIG_CRC16 is not set -# CONFIG_CRC_T10DIF is not set -# CONFIG_CRC_ITU_T is not set -# CONFIG_CRC32 is not set -# CONFIG_CRC7 is not set -# CONFIG_LIBCRC32C is not set -CONFIG_HAS_IOMEM=y -CONFIG_HAS_IOPORT=y -CONFIG_HAS_DMA=y -CONFIG_NLATTR=y diff --git a/target/wag54g/patches/ar7.patch b/target/wag54g/patches/ar7.patch deleted file mode 100644 index 71139fdb8..000000000 --- a/target/wag54g/patches/ar7.patch +++ /dev/null @@ -1,4501 +0,0 @@ -diff -Nur linux-2.6.30.5.orig/arch/mips/ar7/clock.c linux-2.6.30.5/arch/mips/ar7/clock.c ---- linux-2.6.30.5.orig/arch/mips/ar7/clock.c 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.30.5/arch/mips/ar7/clock.c 2009-08-26 20:05:03.000000000 +0200 -@@ -0,0 +1,483 @@ -+/* -+ * Copyright (C) 2007 Felix Fietkau <nbd@openwrt.org> -+ * Copyright (C) 2007 Eugene Konev <ejka@openwrt.org> -+ * -+ * This program is free software; you can redistribute it and/or modify -+ * it under the terms of the GNU General Public License as published by -+ * the Free Software Foundation; either version 2 of the License, or -+ * (at your option) any later version. -+ * -+ * This program is distributed in the hope that it will be useful, -+ * but WITHOUT ANY WARRANTY; without even the implied warranty of -+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -+ * GNU General Public License for more details. -+ * -+ * You should have received a copy of the GNU General Public License -+ * along with this program; if not, write to the Free Software -+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA -+ */ -+ -+#include <linux/init.h> -+#include <linux/types.h> -+#include <linux/module.h> -+#include <linux/delay.h> -+#include <asm/addrspace.h> -+#include <asm/io.h> -+#include <asm/ar7/ar7.h> -+ -+#define BOOT_PLL_SOURCE_MASK 0x3 -+#define CPU_PLL_SOURCE_SHIFT 16 -+#define BUS_PLL_SOURCE_SHIFT 14 -+#define USB_PLL_SOURCE_SHIFT 18 -+#define DSP_PLL_SOURCE_SHIFT 22 -+#define BOOT_PLL_SOURCE_AFE 0 -+#define BOOT_PLL_SOURCE_BUS 0 -+#define BOOT_PLL_SOURCE_REF 1 -+#define BOOT_PLL_SOURCE_XTAL 2 -+#define BOOT_PLL_SOURCE_CPU 3 -+#define BOOT_PLL_BYPASS 0x00000020 -+#define BOOT_PLL_ASYNC_MODE 0x02000000 -+#define BOOT_PLL_2TO1_MODE 0x00008000 -+ -+#define TNETD7200_CLOCK_ID_CPU 0 -+#define TNETD7200_CLOCK_ID_DSP 1 -+#define TNETD7200_CLOCK_ID_USB 2 -+ -+#define TNETD7200_DEF_CPU_CLK 211000000 -+#define TNETD7200_DEF_DSP_CLK 125000000 -+#define TNETD7200_DEF_USB_CLK 48000000 -+ -+struct tnetd7300_clock { -+ u32 ctrl; -+#define PREDIV_MASK 0x001f0000 -+#define PREDIV_SHIFT 16 -+#define POSTDIV_MASK 0x0000001f -+ u32 unused1[3]; -+ u32 pll; -+#define MUL_MASK 0x0000f000 -+#define MUL_SHIFT 12 -+#define PLL_MODE_MASK 0x00000001 -+#define PLL_NDIV 0x00000800 -+#define PLL_DIV 0x00000002 -+#define PLL_STATUS 0x00000001 -+ u32 unused2[3]; -+}; -+ -+struct tnetd7300_clocks { -+ struct tnetd7300_clock bus; -+ struct tnetd7300_clock cpu; -+ struct tnetd7300_clock usb; -+ struct tnetd7300_clock dsp; -+}; -+ -+struct tnetd7200_clock { -+ u32 ctrl; -+ u32 unused1[3]; -+#define DIVISOR_ENABLE_MASK 0x00008000 -+ u32 mul; -+ u32 prediv; -+ u32 postdiv; -+ u32 postdiv2; -+ u32 unused2[6]; -+ u32 cmd; -+ u32 status; -+ u32 cmden; -+ u32 padding[15]; -+}; -+ -+struct tnetd7200_clocks { -+ struct tnetd7200_clock cpu; -+ struct tnetd7200_clock dsp; -+ struct tnetd7200_clock usb; -+}; -+ -+int ar7_cpu_clock = 150000000; -+EXPORT_SYMBOL(ar7_cpu_clock); -+int ar7_bus_clock = 125000000; -+EXPORT_SYMBOL(ar7_bus_clock); -+int ar7_dsp_clock; -+EXPORT_SYMBOL(ar7_dsp_clock); -+ -+static int gcd(int a, int b) -+{ -+ int c; -+ -+ if (a < b) { -+ c = a; -+ a = b; -+ b = c; -+ } -+ while ((c = (a % b))) { -+ a = b; -+ b = c; -+ } -+ return b; -+} -+ -+static void approximate(int base, int target, int *prediv, -+ int *postdiv, int *mul) -+{ -+ int i, j, k, freq, res = target; -+ for (i = 1; i <= 16; i++) -+ for (j = 1; j <= 32; j++) -+ for (k = 1; k <= 32; k++) { -+ freq = abs(base / j * i / k - target); -+ if (freq < res) { -+ res = freq; -+ *mul = i; -+ *prediv = j; -+ *postdiv = k; -+ } -+ } -+} -+ -+static void calculate(int base, int target, int *prediv, int *postdiv, -+ int *mul) -+{ -+ int tmp_gcd, tmp_base, tmp_freq; -+ -+ for (*prediv = 1; *prediv <= 32; (*prediv)++) { -+ tmp_base = base / *prediv; -+ tmp_gcd = gcd(target, tmp_base); -+ *mul = target / tmp_gcd; -+ *postdiv = tmp_base / tmp_gcd; -+ if ((*mul < 1) || (*mul >= 16)) -+ continue; -+ if ((*postdiv > 0) & (*postdiv <= 32)) -+ break; -+ } -+ -+ if (base / (*prediv) * (*mul) / (*postdiv) != target) { -+ approximate(base, target, prediv, postdiv, mul); -+ tmp_freq = base / (*prediv) * (*mul) / (*postdiv); -+ printk(KERN_WARNING -+ "Adjusted requested frequency %d to %d\n", -+ target, tmp_freq); -+ } -+ -+ printk(KERN_DEBUG "Clocks: prediv: %d, postdiv: %d, mul: %d\n", -+ *prediv, *postdiv, *mul); -+} -+ -+static int tnetd7300_dsp_clock(void) -+{ -+ u32 didr1, didr2; -+ u8 rev = ar7_chip_rev(); -+ didr1 = readl((void *)KSEG1ADDR(AR7_REGS_GPIO + 0x18)); -+ didr2 = readl((void *)KSEG1ADDR(AR7_REGS_GPIO + 0x1c)); -+ if (didr2 & (1 << 23)) -+ return 0; -+ if ((rev >= 0x23) && (rev != 0x57)) -+ return 250000000; -+ if ((((didr2 & 0x1fff) << 10) | ((didr1 & 0xffc00000) >> 22)) -+ > 4208000) -+ return 250000000; -+ return 0; -+} -+ -+static int tnetd7300_get_clock(u32 shift, struct tnetd7300_clock *clock, -+ u32 *bootcr, u32 bus_clock) -+{ -+ int product; -+ int base_clock = AR7_REF_CLOCK; -+ u32 ctrl = readl(&clock->ctrl); -+ u32 pll = readl(&clock->pll); -+ int prediv = ((ctrl & PREDIV_MASK) >> PREDIV_SHIFT) + 1; -+ int postdiv = (ctrl & POSTDIV_MASK) + 1; -+ int divisor = prediv * postdiv; -+ int mul = ((pll & MUL_MASK) >> MUL_SHIFT) + 1; -+ -+ switch ((*bootcr & (BOOT_PLL_SOURCE_MASK << shift)) >> shift) { -+ case BOOT_PLL_SOURCE_BUS: -+ base_clock = bus_clock; -+ break; -+ case BOOT_PLL_SOURCE_REF: -+ base_clock = AR7_REF_CLOCK; -+ break; -+ case BOOT_PLL_SOURCE_XTAL: -+ base_clock = AR7_XTAL_CLOCK; -+ break; -+ case BOOT_PLL_SOURCE_CPU: -+ base_clock = ar7_cpu_clock; -+ break; -+ } -+ -+ if (*bootcr & BOOT_PLL_BYPASS) -+ return base_clock / divisor; -+ -+ if ((pll & PLL_MODE_MASK) == 0) -+ return (base_clock >> (mul / 16 + 1)) / divisor; -+ -+ if ((pll & (PLL_NDIV | PLL_DIV)) == (PLL_NDIV | PLL_DIV)) { -+ product = (mul & 1) ? -+ (base_clock * mul) >> 1 : -+ (base_clock * (mul - 1)) >> 2; -+ return product / divisor; -+ } -+ -+ if (mul == 16) -+ return base_clock / divisor; -+ -+ return base_clock * mul / divisor; -+} -+ -+static void tnetd7300_set_clock(u32 shift, struct tnetd7300_clock *clock, -+ u32 *bootcr, u32 frequency) -+{ -+ int prediv, postdiv, mul; -+ int base_clock = ar7_bus_clock; -+ -+ switch ((*bootcr & (BOOT_PLL_SOURCE_MASK << shift)) >> shift) { -+ case BOOT_PLL_SOURCE_BUS: -+ base_clock = ar7_bus_clock; -+ break; -+ case BOOT_PLL_SOURCE_REF: -+ base_clock = AR7_REF_CLOCK; -+ break; -+ case BOOT_PLL_SOURCE_XTAL: -+ base_clock = AR7_XTAL_CLOCK; -+ break; -+ case BOOT_PLL_SOURCE_CPU: -+ base_clock = ar7_cpu_clock; -+ break; -+ } -+ -+ calculate(base_clock, frequency, &prediv, &postdiv, &mul); -+ -+ writel(((prediv - 1) << PREDIV_SHIFT) | (postdiv - 1), &clock->ctrl); -+ mdelay(1); -+ writel(4, &clock->pll); -+ while (readl(&clock->pll) & PLL_STATUS); -+ writel(((mul - 1) << MUL_SHIFT) | (0xff << 3) | 0x0e, &clock->pll); -+ mdelay(75); -+} -+ -+static void __init tnetd7300_init_clocks(void) -+{ -+ u32 *bootcr = (u32 *)ioremap_nocache(AR7_REGS_DCL, 4); -+ struct tnetd7300_clocks *clocks = -+ (struct tnetd7300_clocks *) -+ ioremap_nocache(AR7_REGS_POWER + 0x20, -+ sizeof(struct tnetd7300_clocks)); -+ -+ ar7_bus_clock = tnetd7300_get_clock(BUS_PLL_SOURCE_SHIFT, -+ &clocks->bus, bootcr, AR7_AFE_CLOCK); -+ -+ if (*bootcr & BOOT_PLL_ASYNC_MODE) -+ ar7_cpu_clock = tnetd7300_get_clock(CPU_PLL_SOURCE_SHIFT, -+ &clocks->cpu, bootcr, AR7_AFE_CLOCK); -+ else -+ ar7_cpu_clock = ar7_bus_clock; -+/* -+ tnetd7300_set_clock(USB_PLL_SOURCE_SHIFT, &clocks->usb, -+ bootcr, 48000000); -+*/ -+ if (ar7_dsp_clock == 250000000) -+ tnetd7300_set_clock(DSP_PLL_SOURCE_SHIFT, &clocks->dsp, -+ bootcr, ar7_dsp_clock); -+ -+ iounmap(clocks); -+ iounmap(bootcr); -+} -+ -+static int tnetd7200_get_clock(int base, struct tnetd7200_clock *clock, -+ u32 *bootcr, u32 bus_clock) -+{ -+ int divisor = ((readl(&clock->prediv) & 0x1f) + 1) * -+ ((readl(&clock->postdiv) & 0x1f) + 1); -+ -+ if (*bootcr & BOOT_PLL_BYPASS) -+ return base / divisor; -+ -+ return base * ((readl(&clock->mul) & 0xf) + 1) / divisor; -+} -+ -+ -+static void tnetd7200_set_clock(int base, struct tnetd7200_clock *clock, -+ int prediv, int postdiv, int postdiv2, int mul, u32 frequency) -+{ -+ printk(KERN_INFO -+ "Clocks: base = %d, frequency = %u, prediv = %d, " -+ "postdiv = %d, postdiv2 = %d, mul = %d\n", -+ base, frequency, prediv, postdiv, postdiv2, mul); -+ -+ writel(0, &clock->ctrl); -+ writel(DIVISOR_ENABLE_MASK | ((prediv - 1) & 0x1F), &clock->prediv); -+ writel((mul - 1) & 0xF, &clock->mul); -+ -+ for (mul = 0; mul < 2000; mul++) /* nop */; -+ -+ while (readl(&clock->status) & 0x1) /* nop */; -+ -+ writel(DIVISOR_ENABLE_MASK | ((postdiv - 1) & 0x1F), &clock->postdiv); -+ -+ writel(readl(&clock->cmden) | 1, &clock->cmden); -+ writel(readl(&clock->cmd) | 1, &clock->cmd); -+ -+ while (readl(&clock->status) & 0x1) /* nop */; -+ -+ writel(DIVISOR_ENABLE_MASK | ((postdiv2 - 1) & 0x1F), &clock->postdiv2); -+ -+ writel(readl(&clock->cmden) | 1, &clock->cmden); -+ writel(readl(&clock->cmd) | 1, &clock->cmd); -+ -+ while (readl(&clock->status) & 0x1) /* nop */; -+ -+ writel(readl(&clock->ctrl) | 1, &clock->ctrl); -+} -+ -+static int tnetd7200_get_clock_base(int clock_id, u32 *bootcr) -+{ -+ if (*bootcr & BOOT_PLL_ASYNC_MODE) -+ /* Async */ -+ switch (clock_id) { -+ case TNETD7200_CLOCK_ID_DSP: -+ return AR7_REF_CLOCK; -+ default: -+ return AR7_AFE_CLOCK; -+ } -+ else -+ /* Sync */ -+ if (*bootcr & BOOT_PLL_2TO1_MODE) -+ /* 2:1 */ -+ switch (clock_id) { -+ case TNETD7200_CLOCK_ID_DSP: -+ return AR7_REF_CLOCK; -+ default: -+ return AR7_AFE_CLOCK; -+ } -+ else -+ /* 1:1 */ -+ return AR7_REF_CLOCK; -+} -+ -+ -+static void __init tnetd7200_init_clocks(void) -+{ -+ u32 *bootcr = (u32 *)ioremap_nocache(AR7_REGS_DCL, 4); -+ struct tnetd7200_clocks *clocks = -+ (struct tnetd7200_clocks *) -+ ioremap_nocache(AR7_REGS_POWER + 0x80, -+ sizeof(struct tnetd7200_clocks)); -+ int cpu_base, cpu_mul, cpu_prediv, cpu_postdiv; -+ int dsp_base, dsp_mul, dsp_prediv, dsp_postdiv; -+ int usb_base, usb_mul, usb_prediv, usb_postdiv; -+ -+/* -+ Log from Fritz!Box 7170 Annex B: -+ -+ CPU revision is: 00018448 -+ Clocks: Async mode -+ Clocks: Setting DSP clock -+ Clocks: prediv: 1, postdiv: 1, mul: 5 -+ Clocks: base = 25000000, frequency = 125000000, prediv = 1, -+ postdiv = 2, postdiv2 = 1, mul = 10 -+ Clocks: Setting CPU clock -+ Adjusted requested frequency 211000000 to 211968000 -+ Clocks: prediv: 1, postdiv: 1, mul: 6 -+ Clocks: base = 35328000, frequency = 211968000, prediv = 1, -+ postdiv = 1, postdiv2 = -1, mul = 6 -+ Clocks: Setting USB clock -+ Adjusted requested frequency 48000000 to 48076920 -+ Clocks: prediv: 13, postdiv: 1, mul: 5 -+ Clocks: base = 125000000, frequency = 48000000, prediv = 13, -+ postdiv = 1, postdiv2 = -1, mul = 5 -+ -+ DSL didn't work if you didn't set the postdiv 2:1 postdiv2 combination, -+ driver hung on startup. -+ Haven't tested this on a synchronous board, -+ neither do i know what to do with ar7_dsp_clock -+*/ -+ -+ cpu_base = tnetd7200_get_clock_base(TNETD7200_CLOCK_ID_CPU, bootcr); -+ dsp_base = tnetd7200_get_clock_base(TNETD7200_CLOCK_ID_DSP, bootcr); -+ -+ if (*bootcr & BOOT_PLL_ASYNC_MODE) { -+ printk(KERN_INFO "Clocks: Async mode\n"); -+ -+ printk(KERN_INFO "Clocks: Setting DSP clock\n"); -+ calculate(dsp_base, TNETD7200_DEF_DSP_CLK, -+ &dsp_prediv, &dsp_postdiv, &dsp_mul); -+ ar7_bus_clock = -+ ((dsp_base / dsp_prediv) * dsp_mul) / dsp_postdiv; -+ tnetd7200_set_clock(dsp_base, &clocks->dsp, -+ dsp_prediv, dsp_postdiv * 2, dsp_postdiv, dsp_mul * 2, -+ ar7_bus_clock); -+ -+ printk(KERN_INFO "Clocks: Setting CPU clock\n"); -+ calculate(cpu_base, TNETD7200_DEF_CPU_CLK, &cpu_prediv, -+ &cpu_postdiv, &cpu_mul); -+ ar7_cpu_clock = -+ ((cpu_base / cpu_prediv) * cpu_mul) / cpu_postdiv; -+ tnetd7200_set_clock(cpu_base, &clocks->cpu, -+ cpu_prediv, cpu_postdiv, -1, cpu_mul, -+ ar7_cpu_clock); -+ -+ } else -+ if (*bootcr & BOOT_PLL_2TO1_MODE) { -+ printk(KERN_INFO "Clocks: Sync 2:1 mode\n"); -+ -+ printk(KERN_INFO "Clocks: Setting CPU clock\n"); -+ calculate(cpu_base, TNETD7200_DEF_CPU_CLK, &cpu_prediv, -+ &cpu_postdiv, &cpu_mul); -+ ar7_cpu_clock = ((cpu_base / cpu_prediv) * cpu_mul) -+ / cpu_postdiv; -+ tnetd7200_set_clock(cpu_base, &clocks->cpu, -+ cpu_prediv, cpu_postdiv, -1, cpu_mul, -+ ar7_cpu_clock); -+ -+ printk(KERN_INFO "Clocks: Setting DSP clock\n"); -+ calculate(dsp_base, TNETD7200_DEF_DSP_CLK, &dsp_prediv, -+ &dsp_postdiv, &dsp_mul); -+ ar7_bus_clock = ar7_cpu_clock / 2; -+ tnetd7200_set_clock(dsp_base, &clocks->dsp, -+ dsp_prediv, dsp_postdiv * 2, dsp_postdiv, -+ dsp_mul * 2, ar7_bus_clock); -+ } else { -+ printk(KERN_INFO "Clocks: Sync 1:1 mode\n"); -+ -+ printk(KERN_INFO "Clocks: Setting DSP clock\n"); -+ calculate(dsp_base, TNETD7200_DEF_DSP_CLK, &dsp_prediv, -+ &dsp_postdiv, &dsp_mul); -+ ar7_bus_clock = ((dsp_base / dsp_prediv) * dsp_mul) -+ / dsp_postdiv; -+ tnetd7200_set_clock(dsp_base, &clocks->dsp, -+ dsp_prediv, dsp_postdiv * 2, dsp_postdiv, -+ dsp_mul * 2, ar7_bus_clock); -+ -+ ar7_cpu_clock = ar7_bus_clock; -+ } -+ -+ printk(KERN_INFO "Clocks: Setting USB clock\n"); -+ usb_base = ar7_bus_clock; -+ calculate(usb_base, TNETD7200_DEF_USB_CLK, &usb_prediv, -+ &usb_postdiv, &usb_mul); -+ tnetd7200_set_clock(usb_base, &clocks->usb, -+ usb_prediv, usb_postdiv, -1, usb_mul, -+ TNETD7200_DEF_USB_CLK); -+ -+ #warning FIXME -+ ar7_dsp_clock = ar7_cpu_clock; -+ -+ iounmap(clocks); -+ iounmap(bootcr); -+} -+ -+void __init ar7_init_clocks(void) -+{ -+ switch (ar7_chip_id()) { -+ case AR7_CHIP_7100: -+#warning FIXME: Check if the new 7200 clock init works for 7100 -+ tnetd7200_init_clocks(); -+ break; -+ case AR7_CHIP_7200: -+ tnetd7200_init_clocks(); -+ break; -+ case AR7_CHIP_7300: -+ ar7_dsp_clock = tnetd7300_dsp_clock(); -+ tnetd7300_init_clocks(); -+ break; -+ default: -+ break; -+ } -+} -diff -Nur linux-2.6.30.5.orig/arch/mips/ar7/gpio.c linux-2.6.30.5/arch/mips/ar7/gpio.c ---- linux-2.6.30.5.orig/arch/mips/ar7/gpio.c 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.30.5/arch/mips/ar7/gpio.c 2009-08-26 20:05:03.000000000 +0200 -@@ -0,0 +1,49 @@ -+/* -+ * Copyright (C) 2007 Felix Fietkau <nbd@openwrt.org> -+ * Copyright (C) 2007 Eugene Konev <ejka@openwrt.org> -+ * -+ * This program is free software; you can redistribute it and/or modify -+ * it under the terms of the GNU General Public License as published by -+ * the Free Software Foundation; either version 2 of the License, or -+ * (at your option) any later version. -+ * -+ * This program is distributed in the hope that it will be useful, -+ * but WITHOUT ANY WARRANTY; without even the implied warranty of -+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -+ * GNU General Public License for more details. -+ * -+ * You should have received a copy of the GNU General Public License -+ * along with this program; if not, write to the Free Software -+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA -+ */ -+ -+#include <linux/module.h> -+ -+#include <asm/ar7/gpio.h> -+ -+static const char *ar7_gpio_list[AR7_GPIO_MAX]; -+ -+int gpio_request(unsigned gpio, const char *label) -+{ -+ if (gpio >= AR7_GPIO_MAX) -+ return -EINVAL; -+ -+ if (ar7_gpio_list[gpio]) -+ return -EBUSY; -+ -+ if (label) { -+ ar7_gpio_list[gpio] = label; -+ } else { -+ ar7_gpio_list[gpio] = "busy"; -+ } -+ -+ return 0; -+} -+EXPORT_SYMBOL(gpio_request); -+ -+void gpio_free(unsigned gpio) -+{ -+ BUG_ON(!ar7_gpio_list[gpio]); -+ ar7_gpio_list[gpio] = NULL; -+} -+EXPORT_SYMBOL(gpio_free); -diff -Nur linux-2.6.30.5.orig/arch/mips/ar7/irq.c linux-2.6.30.5/arch/mips/ar7/irq.c ---- linux-2.6.30.5.orig/arch/mips/ar7/irq.c 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.30.5/arch/mips/ar7/irq.c 2009-08-26 20:05:03.000000000 +0200 -@@ -0,0 +1,183 @@ -+/* -+ * Copyright (C) 2006,2007 Felix Fietkau <nbd@openwrt.org> -+ * Copyright (C) 2006,2007 Eugene Konev <ejka@openwrt.org> -+ * -+ * This program is free software; you can redistribute it and/or modify -+ * it under the terms of the GNU General Public License as published by -+ * the Free Software Foundation; either version 2 of the License, or -+ * (at your option) any later version. -+ * -+ * This program is distributed in the hope that it will be useful, -+ * but WITHOUT ANY WARRANTY; without even the implied warranty of -+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -+ * GNU General Public License for more details. -+ * -+ * You should have received a copy of the GNU General Public License -+ * along with this program; if not, write to the Free Software -+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA -+ */ -+ -+#include <linux/interrupt.h> -+#include <linux/io.h> -+ -+#include <asm/irq_cpu.h> -+#include <asm/mipsregs.h> -+#include <asm/ar7/ar7.h> -+ -+#define EXCEPT_OFFSET 0x80 -+#define PACE_OFFSET 0xA0 -+#define CHNLS_OFFSET 0x200 -+ -+#define REG_OFFSET(irq, reg) ((irq) / 32 * 0x4 + reg * 0x10) -+#define SEC_REG_OFFSET(reg) (EXCEPT_OFFSET + reg * 0x8) -+#define SEC_SR_OFFSET (SEC_REG_OFFSET(0)) /* 0x80 */ -+#define CR_OFFSET(irq) (REG_OFFSET(irq, 1)) /* 0x10 */ -+#define SEC_CR_OFFSET (SEC_REG_OFFSET(1)) /* 0x88 */ -+#define ESR_OFFSET(irq) (REG_OFFSET(irq, 2)) /* 0x20 */ -+#define SEC_ESR_OFFSET (SEC_REG_OFFSET(2)) /* 0x90 */ -+#define ECR_OFFSET(irq) (REG_OFFSET(irq, 3)) /* 0x30 */ -+#define SEC_ECR_OFFSET (SEC_REG_OFFSET(3)) /* 0x98 */ -+#define PIR_OFFSET (0x40) -+#define MSR_OFFSET (0x44) -+#define PM_OFFSET(irq) (REG_OFFSET(irq, 5)) /* 0x50 */ -+#define TM_OFFSET(irq) (REG_OFFSET(irq, 6)) /* 0x60 */ -+ -+#define REG(addr) ((u32 *)(KSEG1ADDR(AR7_REGS_IRQ) + addr)) -+ -+#define CHNL_OFFSET(chnl) (CHNLS_OFFSET + (chnl * 4)) -+ -+static void ar7_unmask_irq(unsigned int irq_nr); -+static void ar7_mask_irq(unsigned int irq_nr); -+static void ar7_ack_irq(unsigned int irq_nr); -+static void ar7_unmask_sec_irq(unsigned int irq_nr); -+static void ar7_mask_sec_irq(unsigned int irq_nr); -+static void ar7_ack_sec_irq(unsigned int irq_nr); -+static void ar7_cascade(void); -+static void ar7_irq_init(int base); -+static int ar7_irq_base; -+ -+static struct irq_chip ar7_irq_type = { -+ .name = "AR7", -+ .unmask = ar7_unmask_irq, -+ .mask = ar7_mask_irq, -+ .ack = ar7_ack_irq -+}; -+ -+static struct irq_chip ar7_sec_irq_type = { -+ .name = "AR7", -+ .unmask = ar7_unmask_sec_irq, -+ .mask = ar7_mask_sec_irq, -+ .ack = ar7_ack_sec_irq, -+}; -+ -+static struct irqaction ar7_cascade_action = { -+ .handler = no_action, -+ .name = "AR7 cascade interrupt" -+}; -+ -+static void ar7_unmask_irq(unsigned int irq) -+{ -+ writel(1 << ((irq - ar7_irq_base) % 32), -+ REG(ESR_OFFSET(irq - ar7_irq_base))); -+} -+ -+static void ar7_mask_irq(unsigned int irq) -+{ -+ writel(1 << ((irq - ar7_irq_base) % 32), -+ REG(ECR_OFFSET(irq - ar7_irq_base))); -+} -+ -+static void ar7_ack_irq(unsigned int irq) -+{ -+ writel(1 << ((irq - ar7_irq_base) % 32), -+ REG(CR_OFFSET(irq - ar7_irq_base))); -+} -+ -+static void ar7_unmask_sec_irq(unsigned int irq) -+{ -+ writel(1 << (irq - ar7_irq_base - 40), REG(SEC_ESR_OFFSET)); -+} -+ -+static void ar7_mask_sec_irq(unsigned int irq) -+{ -+ writel(1 << (irq - ar7_irq_base - 40), REG(SEC_ECR_OFFSET)); -+} -+ -+static void ar7_ack_sec_irq(unsigned int irq) -+{ -+ writel(1 << (irq - ar7_irq_base - 40), REG(SEC_CR_OFFSET)); -+} -+ -+void __init arch_init_irq(void) { -+ mips_cpu_irq_init(); -+ ar7_irq_init(8); -+} -+ -+static void __init ar7_irq_init(int base) -+{ -+ int i; -+ /* -+ * Disable interrupts and clear pending -+ */ -+ writel(0xffffffff, REG(ECR_OFFSET(0))); -+ writel(0xff, REG(ECR_OFFSET(32))); -+ writel(0xffffffff, REG(SEC_ECR_OFFSET)); -+ writel(0xffffffff, REG(CR_OFFSET(0))); -+ writel(0xff, REG(CR_OFFSET(32))); -+ writel(0xffffffff, REG(SEC_CR_OFFSET)); -+ -+ ar7_irq_base = base; -+ -+ for (i = 0; i < 40; i++) { -+ writel(i, REG(CHNL_OFFSET(i))); -+ /* Primary IRQ's */ -+ set_irq_chip_and_handler(base + i, &ar7_irq_type, -+ handle_level_irq); -+ /* Secondary IRQ's */ -+ if (i < 32) -+ set_irq_chip_and_handler(base + i + 40, -+ &ar7_sec_irq_type, -+ handle_level_irq); -+ } -+ -+ setup_irq(2, &ar7_cascade_action); -+ setup_irq(ar7_irq_base, &ar7_cascade_action); -+ set_c0_status(IE_IRQ0); -+} -+ -+static void ar7_cascade(void) -+{ -+ u32 status; -+ int i, irq; -+ -+ /* Primary IRQ's */ -+ irq = readl(REG(PIR_OFFSET)) & 0x3f; -+ if (irq) { -+ do_IRQ(ar7_irq_base + irq); -+ return; -+ } -+ -+ /* Secondary IRQ's are cascaded through primary '0' */ -+ writel(1, REG(CR_OFFSET(irq))); -+ status = readl(REG(SEC_SR_OFFSET)); -+ for (i = 0; i < 32; i++) { -+ if (status & 1) { -+ do_IRQ(ar7_irq_base + i + 40); -+ return; -+ } -+ status >>= 1; -+ } -+ -+ spurious_interrupt(); -+} -+ -+asmlinkage void plat_irq_dispatch(void) -+{ -+ unsigned int pending = read_c0_status() & read_c0_cause() & ST0_IM; -+ if (pending & STATUSF_IP7) /* cpu timer */ -+ do_IRQ(7); -+ else if (pending & STATUSF_IP2) /* int0 hardware line */ -+ ar7_cascade(); -+ else -+ spurious_interrupt(); -+} -diff -Nur linux-2.6.30.5.orig/arch/mips/ar7/Makefile linux-2.6.30.5/arch/mips/ar7/Makefile ---- linux-2.6.30.5.orig/arch/mips/ar7/Makefile 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.30.5/arch/mips/ar7/Makefile 2009-08-26 20:05:03.000000000 +0200 -@@ -0,0 +1,10 @@ -+ -+obj-y := \ -+ prom.o \ -+ setup.o \ -+ memory.o \ -+ irq.o \ -+ time.o \ -+ platform.o \ -+ gpio.o \ -+ clock.o -diff -Nur linux-2.6.30.5.orig/arch/mips/ar7/memory.c linux-2.6.30.5/arch/mips/ar7/memory.c ---- linux-2.6.30.5.orig/arch/mips/ar7/memory.c 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.30.5/arch/mips/ar7/memory.c 2009-08-26 20:05:03.000000000 +0200 -@@ -0,0 +1,74 @@ -+/* -+ * Based on arch/mips/mm/init.c -+ * Copyright (C) 1994 - 2000 Ralf Baechle -+ * Copyright (C) 1999, 2000 Silicon Graphics, Inc. -+ * Kevin D. Kissell, kevink@mips.com and Carsten Langgaard, carstenl@mips.com -+ * Copyright (C) 2000 MIPS Technologies, Inc. All rights reserved. -+ * -+ * This program is free software; you can redistribute it and/or modify -+ * it under the terms of the GNU General Public License as published by -+ * the Free Software Foundation; either version 2 of the License, or -+ * (at your option) any later version. -+ * -+ * This program is distributed in the hope that it will be useful, -+ * but WITHOUT ANY WARRANTY; without even the implied warranty of -+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -+ * GNU General Public License for more details. -+ * -+ * You should have received a copy of the GNU General Public License -+ * along with this program; if not, write to the Free Software -+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA -+ */ -+#include <linux/bootmem.h> -+#include <linux/init.h> -+#include <linux/mm.h> -+#include <linux/module.h> -+#include <linux/pfn.h> -+#include <linux/proc_fs.h> -+#include <linux/string.h> -+#include <linux/swap.h> -+ -+#include <asm/bootinfo.h> -+#include <asm/page.h> -+#include <asm/sections.h> -+ -+#include <asm/mips-boards/prom.h> -+ -+static int __init memsize(void) -+{ -+ u32 size = (64 << 20); -+ u32 *addr = (u32 *)KSEG1ADDR(0x14000000 + size - 4); -+ u32 *kernel_end = (u32 *)KSEG1ADDR(CPHYSADDR((u32)&_end)); -+ u32 *tmpaddr = addr; -+ -+ while (tmpaddr > kernel_end) { -+ *tmpaddr = (u32)tmpaddr; -+ size >>= 1; -+ tmpaddr -= size >> 2; -+ } -+ -+ do { -+ tmpaddr += size >> 2; -+ if (*tmpaddr != (u32)tmpaddr) -+ break; -+ size <<= 1; -+ } while (size < (64 << 20)); -+ -+ writel(tmpaddr, &addr); -+ -+ return size; -+} -+ -+void __init prom_meminit(void) -+{ -+ unsigned long pages; -+ -+ pages = memsize() >> PAGE_SHIFT; -+ add_memory_region(PHYS_OFFSET, pages << PAGE_SHIFT, -+ BOOT_MEM_RAM); -+} -+ -+void __init prom_free_prom_memory(void) -+{ -+ return; -+} -diff -Nur linux-2.6.30.5.orig/arch/mips/ar7/platform.c linux-2.6.30.5/arch/mips/ar7/platform.c ---- linux-2.6.30.5.orig/arch/mips/ar7/platform.c 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.30.5/arch/mips/ar7/platform.c 2009-08-26 20:06:50.000000000 +0200 -@@ -0,0 +1,550 @@ -+/* -+ * Copyright (C) 2006,2007 Felix Fietkau <nbd@openwrt.org> -+ * Copyright (C) 2006,2007 Eugene Konev <ejka@openwrt.org> -+ * -+ * This program is free software; you can redistribute it and/or modify -+ * it under the terms of the GNU General Public License as published by -+ * the Free Software Foundation; either version 2 of the License, or -+ * (at your option) any later version. -+ * -+ * This program is distributed in the hope that it will be useful, -+ * but WITHOUT ANY WARRANTY; without even the implied warranty of -+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -+ * GNU General Public License for more details. -+ * -+ * You should have received a copy of the GNU General Public License -+ * along with this program; if not, write to the Free Software -+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA -+ */ -+ -+#include <linux/autoconf.h> -+#include <linux/init.h> -+#include <linux/types.h> -+#include <linux/module.h> -+#include <linux/delay.h> -+#include <linux/dma-mapping.h> -+#include <linux/platform_device.h> -+#include <linux/mtd/physmap.h> -+#include <linux/serial.h> -+#include <linux/serial_8250.h> -+#include <linux/ioport.h> -+#include <linux/io.h> -+#include <linux/version.h> -+#include <linux/vlynq.h> -+#include <linux/leds.h> -+#include <linux/string.h> -+#include <linux/phy.h> -+#include <linux/phy_fixed.h> -+ -+#include <asm/addrspace.h> -+#include <asm/ar7/ar7.h> -+#include <asm/ar7/gpio.h> -+#include <asm/ar7/prom.h> -+ -+struct plat_vlynq_data { -+ struct plat_vlynq_ops ops; -+ int gpio_bit; -+ int reset_bit; -+}; -+ -+ -+static int vlynq_on(struct vlynq_device *dev) -+{ -+ int result; -+ struct plat_vlynq_data *pdata = dev->dev.platform_data; -+ -+ if ((result = gpio_request(pdata->gpio_bit, "vlynq"))) -+ goto out; -+ -+ ar7_device_reset(pdata->reset_bit); -+ -+ if ((result = ar7_gpio_disable(pdata->gpio_bit))) -+ goto out_enabled; -+ -+ if ((result = ar7_gpio_enable(pdata->gpio_bit))) -+ goto out_enabled; -+ -+ if ((result = gpio_direction_output(pdata->gpio_bit, 0))) -+ goto out_gpio_enabled; -+ -+ mdelay(50); -+ -+ gpio_set_value(pdata->gpio_bit, 1); -+ mdelay(50); -+ -+ return 0; -+ -+out_gpio_enabled: -+ ar7_gpio_disable(pdata->gpio_bit); -+out_enabled: -+ ar7_device_disable(pdata->reset_bit); -+ gpio_free(pdata->gpio_bit); -+out: -+ return result; -+} -+ -+static void vlynq_off(struct vlynq_device *dev) -+{ -+ struct plat_vlynq_data *pdata = dev->dev.platform_data; -+ ar7_gpio_disable(pdata->gpio_bit); -+ gpio_free(pdata->gpio_bit); -+ ar7_device_disable(pdata->reset_bit); -+} -+ -+static struct resource physmap_flash_resource = { -+ .name = "mem", -+ .flags = IORESOURCE_MEM, -+ .start = 0x10000000, -+ .end = 0x107fffff, -+}; -+ -+static struct resource cpmac_low_res[] = { -+ { -+ .name = "regs", -+ .flags = IORESOURCE_MEM, -+ .start = AR7_REGS_MAC0, -+ .end = AR7_REGS_MAC0 + 0x7ff, -+ }, -+ { -+ .name = "irq", -+ .flags = IORESOURCE_IRQ, -+ .start = 27, -+ .end = 27, -+ }, -+}; -+ -+static struct resource cpmac_high_res[] = { -+ { -+ .name = "regs", -+ .flags = IORESOURCE_MEM, -+ .start = AR7_REGS_MAC1, -+ .end = AR7_REGS_MAC1 + 0x7ff, -+ }, -+ { -+ .name = "irq", -+ .flags = IORESOURCE_IRQ, -+ .start = 41, -+ .end = 41, -+ }, -+}; -+ -+static struct resource vlynq_low_res[] = { -+ { -+ .name = "regs", -+ .flags = IORESOURCE_MEM, -+ .start = AR7_REGS_VLYNQ0, -+ .end = AR7_REGS_VLYNQ0 + 0xff, -+ }, -+ { -+ .name = "irq", -+ .flags = IORESOURCE_IRQ, -+ .start = 29, -+ .end = 29, -+ }, -+ { -+ .name = "mem", -+ .flags = IORESOURCE_MEM, -+ .start = 0x04000000, -+ .end = 0x04ffffff, -+ }, -+ { -+ .name = "devirq", -+ .flags = IORESOURCE_IRQ, -+ .start = 80, -+ .end = 111, -+ }, -+}; -+ -+static struct resource vlynq_high_res[] = { -+ { -+ .name = "regs", -+ .flags = IORESOURCE_MEM, -+ .start = AR7_REGS_VLYNQ1, -+ .end = AR7_REGS_VLYNQ1 + 0xff, -+ }, -+ { -+ .name = "irq", -+ .flags = IORESOURCE_IRQ, -+ .start = 33, -+ .end = 33, -+ }, -+ { -+ .name = "mem", -+ .flags = IORESOURCE_MEM, -+ .start = 0x0c000000, -+ .end = 0x0cffffff, -+ }, -+ { -+ .name = "devirq", -+ .flags = IORESOURCE_IRQ, -+ .start = 112, -+ .end = 143, -+ }, -+}; -+ -+static struct resource usb_res[] = { -+ { -+ .name = "regs", -+ .flags = IORESOURCE_MEM, -+ .start = AR7_REGS_USB, -+ .end = AR7_REGS_USB + 0xff, -+ }, -+ { -+ .name = "irq", -+ .flags = IORESOURCE_IRQ, -+ .start = 32, -+ .end = 32, -+ }, -+ { -+ .name = "mem", -+ .flags = IORESOURCE_MEM, -+ .start = 0x03400000, -+ .end = 0x034001fff, -+ }, -+}; -+ -+static struct physmap_flash_data physmap_flash_data = { -+ .width = 2, -+}; -+ -+/* lets assume this is suitable for both high and low cpmacs links */ -+static struct fixed_phy_status fixed_phy_status __initdata = { -+ .link = 1, -+ .speed = 100, -+ .duplex = 1, -+}; -+ -+static struct plat_cpmac_data cpmac_low_data = { -+ .reset_bit = 17, -+ .power_bit = 20, -+ .phy_mask = 0x80000000, -+}; -+ -+static struct plat_cpmac_data cpmac_high_data = { -+ .reset_bit = 21, -+ .power_bit = 22, -+ .phy_mask = 0x7fffffff, -+}; -+ -+static struct plat_vlynq_data vlynq_low_data = { -+ .ops.on = vlynq_on, -+ .ops.off = vlynq_off, -+ .reset_bit = 20, -+ .gpio_bit = 18, -+}; -+ -+static struct plat_vlynq_data vlynq_high_data = { -+ .ops.on = vlynq_on, -+ .ops.off = vlynq_off, -+ .reset_bit = 16, -+ .gpio_bit = 19, -+}; -+ -+static struct platform_device physmap_flash = { -+ .id = 0, -+ .name = "physmap-flash", -+ .dev.platform_data = &physmap_flash_data, -+ .resource = &physmap_flash_resource, -+ .num_resources = 1, -+}; -+ -+static u64 cpmac_dma_mask = DMA_32BIT_MASK; -+static struct platform_device cpmac_low = { -+ .id = 0, -+ .name = "cpmac", -+ .dev = { -+ .dma_mask = &cpmac_dma_mask, -+ .coherent_dma_mask = DMA_32BIT_MASK, -+ .platform_data = &cpmac_low_data, -+ }, -+ .resource = cpmac_low_res, -+ .num_resources = ARRAY_SIZE(cpmac_low_res), -+}; -+ -+static struct platform_device cpmac_high = { -+ .id = 1, -+ .name = "cpmac", -+ .dev = { -+ .dma_mask = &cpmac_dma_mask, -+ .coherent_dma_mask = DMA_32BIT_MASK, -+ .platform_data = &cpmac_high_data, -+ }, -+ .resource = cpmac_high_res, -+ .num_resources = ARRAY_SIZE(cpmac_high_res), -+}; -+ -+static struct platform_device vlynq_low = { -+ .id = 0, -+ .name = "vlynq", -+ .dev.platform_data = &vlynq_low_data, -+ .resource = vlynq_low_res, -+ .num_resources = ARRAY_SIZE(vlynq_low_res), -+}; -+ -+static struct platform_device vlynq_high = { -+ .id = 1, -+ .name = "vlynq", -+ .dev.platform_data = &vlynq_high_data, -+ .resource = vlynq_high_res, -+ .num_resources = ARRAY_SIZE(vlynq_high_res), -+}; -+ -+ -+/* This is proper way to define uart ports, but they are then detected -+ * as xscale and, obviously, don't work... -+ */ -+#if !defined(CONFIG_SERIAL_8250) -+ -+static struct plat_serial8250_port uart0_data = { -+ .mapbase = AR7_REGS_UART0, -+ .irq = AR7_IRQ_UART0, -+ .regshift = 2, -+ .iotype = UPIO_MEM, -+ .flags = UPF_BOOT_AUTOCONF | UPF_IOREMAP, -+}; -+ -+static struct plat_serial8250_port uart1_data = { -+ .mapbase = UR8_REGS_UART1, -+ .irq = AR7_IRQ_UART1, -+ .regshift = 2, -+ .iotype = UPIO_MEM, -+ .flags = UPF_BOOT_AUTOCONF | UPF_IOREMAP, -+}; -+ -+static struct plat_serial8250_port uart_data[] = { -+ uart0_data, -+ uart1_data, -+ { .flags = 0 } -+}; -+ -+static struct plat_serial8250_port uart_data_single[] = { -+ uart0_data, -+ { .flags = 0 } -+}; -+ -+static struct platform_device uart = { -+ .id = 0, -+ .name = "serial8250", -+ .dev.platform_data = uart_data_single -+}; -+#endif -+ -+static struct gpio_led default_leds[] = { -+ { .name = "status", .gpio = 8, .active_low = 1, }, -+}; -+ -+static struct gpio_led dsl502t_leds[] = { -+ { .name = "status", .gpio = 9, .active_low = 1, }, -+ { .name = "ethernet", .gpio = 7, .active_low = 1, }, -+ { .name = "usb", .gpio = 12, .active_low = 1, }, -+}; -+ -+static struct gpio_led dg834g_leds[] = { -+ { .name = "ppp", .gpio = 6, .active_low = 1, }, -+ { .name = "status", .gpio = 7, .active_low = 1, }, -+ { .name = "adsl", .gpio = 8, .active_low = 1, }, -+ { .name = "wifi", .gpio = 12, .active_low = 1, }, -+ { .name = "power", .gpio = 14, .active_low = 1, .default_trigger = "default-on", }, -+}; -+ -+static struct gpio_led fb_sl_leds[] = { -+ { .name = "1", .gpio = 7, }, -+ { .name = "2", .gpio = 13, .active_low = 1, }, -+ { .name = "3", .gpio = 10, .active_low = 1, }, -+ { .name = "4", .gpio = 12, .active_low = 1, }, -+ { .name = "5", .gpio = 9, .active_low = 1, }, -+}; -+ -+static struct gpio_led fb_fon_leds[] = { -+ { .name = "1", .gpio = 8, }, -+ { .name = "2", .gpio = 3, .active_low = 1, }, -+ { .name = "3", .gpio = 5, }, -+ { .name = "4", .gpio = 4, .active_low = 1, }, -+ { .name = "5", .gpio = 11, .active_low = 1, }, -+}; -+ -+static struct gpio_led_platform_data ar7_led_data; -+ -+static struct platform_device ar7_gpio_leds = { -+ .name = "leds-gpio", -+ .id = -1, -+ .dev = { -+ .platform_data = &ar7_led_data, -+ } -+}; -+ -+static struct platform_device ar7_udc = { -+ .id = -1, -+ .name = "ar7_udc", -+ .resource = usb_res, -+ .num_resources = ARRAY_SIZE(usb_res), -+}; -+ -+static inline unsigned char char2hex(char h) -+{ -+ switch (h) { -+ case '0': case '1': case '2': case '3': case '4': -+ case '5': case '6': case '7': case '8': case '9': -+ return h - '0'; -+ case 'A': case 'B': case 'C': case 'D': case 'E': case 'F': -+ return h - 'A' + 10; -+ case 'a': case 'b': case 'c': case 'd': case 'e': case 'f': -+ return h - 'a' + 10; -+ default: -+ return 0; -+ } -+} -+ -+static void cpmac_get_mac(int instance, unsigned char *dev_addr) -+{ -+ int i; -+ char name[5], default_mac[] = "00:00:00:12:34:56", *mac; -+ -+ mac = NULL; -+ sprintf(name, "mac%c", 'a' + instance); -+ mac = prom_getenv(name); -+ if (!mac) { -+ sprintf(name, "mac%c", 'a'); -+ mac = prom_getenv(name); -+ } -+ if (!mac) -+ mac = default_mac; -+ for (i = 0; i < 6; i++) -+ dev_addr[i] = (char2hex(mac[i * 3]) << 4) + -+ char2hex(mac[i * 3 + 1]); -+} -+ -+static void __init detect_leds(void) -+{ -+ char *prId, *usb_prod; -+ -+ /* Default LEDs */ -+ ar7_led_data.num_leds = ARRAY_SIZE(default_leds); -+ ar7_led_data.leds = default_leds; -+ -+ /* FIXME: the whole thing is unreliable */ -+ prId = prom_getenv("ProductID"); -+ usb_prod = prom_getenv("usb_prod"); -+ -+ /* If we can't get the product id from PROM, use the default LEDs */ -+ if (!prId) -+ return; -+ -+ if (strstr(prId, "Fritz_Box_FON")) { -+ ar7_led_data.num_leds = ARRAY_SIZE(fb_fon_leds); -+ ar7_led_data.leds = fb_fon_leds; -+ } else if (strstr(prId, "Fritz_Box_")) { -+ ar7_led_data.num_leds = ARRAY_SIZE(fb_sl_leds); -+ ar7_led_data.leds = fb_sl_leds; -+ } else if ((!strcmp(prId, "AR7RD") || !strcmp(prId, "AR7DB")) && usb_prod != NULL && strstr(usb_prod, "DSL-502T")) { -+ ar7_led_data.num_leds = ARRAY_SIZE(dsl502t_leds); -+ ar7_led_data.leds = dsl502t_leds; -+ } else if (strstr(prId, "DG834")) { -+ ar7_led_data.num_leds = ARRAY_SIZE(dg834g_leds); -+ ar7_led_data.leds = dg834g_leds; -+ } -+} -+ -+static int __init ar7_register_devices(void) -+{ -+ int res; -+ -+#ifdef CONFIG_SERIAL_8250 -+ -+ static struct uart_port uart_port[2]; -+ -+ memset(uart_port, 0, sizeof(struct uart_port) * 2); -+ -+ uart_port[0].type = PORT_AR7; -+ uart_port[0].line = 0; -+ uart_port[0].irq = AR7_IRQ_UART0; -+ uart_port[0].uartclk = ar7_bus_freq() / 2; -+ uart_port[0].iotype = UPIO_MEM; -+ uart_port[0].mapbase = AR7_REGS_UART0; -+ uart_port[0].membase = ioremap(uart_port[0].mapbase, 256); -+ uart_port[0].regshift = 2; -+ res = early_serial_setup(&uart_port[0]); -+ if (res) -+ return res; -+ -+ -+ /* Only TNETD73xx have a second serial port */ -+ if (ar7_has_second_uart()) { -+ uart_port[1].type = PORT_AR7; -+ uart_port[1].line = 1; -+ uart_port[1].irq = AR7_IRQ_UART1; -+ uart_port[1].uartclk = ar7_bus_freq() / 2; -+ uart_port[1].iotype = UPIO_MEM; -+ uart_port[1].mapbase = UR8_REGS_UART1; -+ uart_port[1].membase = ioremap(uart_port[1].mapbase, 256); -+ uart_port[1].regshift = 2; -+ res = early_serial_setup(&uart_port[1]); -+ if (res) -+ return res; -+ } -+ -+#else /* !CONFIG_SERIAL_8250 */ -+ -+ uart_data[0].uartclk = ar7_bus_freq() / 2; -+ uart_data[1].uartclk = uart_data[0].uartclk; -+ -+ /* Only TNETD73xx have a second serial port */ -+ if (ar7_has_second_uart()) -+ uart.dev.platform_data = uart_data; -+ -+ res = platform_device_register(&uart); -+ if (res) -+ return res; -+ -+#endif /* CONFIG_SERIAL_8250 */ -+ -+ res = platform_device_register(&physmap_flash); -+ if (res) -+ return res; -+ -+ ar7_device_disable(vlynq_low_data.reset_bit); -+ res = platform_device_register(&vlynq_low); -+ if (res) -+ return res; -+ -+ if (ar7_has_high_vlynq()) { -+ ar7_device_disable(vlynq_high_data.reset_bit); -+ res = platform_device_register(&vlynq_high); -+ if (res) -+ return res; -+ } -+ -+ if (ar7_has_high_cpmac()) { -+ res = fixed_phy_add(PHY_POLL, cpmac_high.id, &fixed_phy_status); -+ if (res && res != -ENODEV) -+ return res; -+ -+ cpmac_get_mac(1, cpmac_high_data.dev_addr); -+ res = platform_device_register(&cpmac_high); -+ if (res) -+ return res; -+ } else { -+ cpmac_low_data.phy_mask = 0xffffffff; -+ } -+ -+ res = fixed_phy_add(PHY_POLL, cpmac_low.id, &fixed_phy_status); -+ if (res && res != -ENODEV) -+ return res; -+ -+ cpmac_get_mac(0, cpmac_low_data.dev_addr); -+ res = platform_device_register(&cpmac_low); -+ if (res) -+ return res; -+ -+ detect_leds(); -+ res = platform_device_register(&ar7_gpio_leds); -+ if (res) -+ return res; -+ -+ res = platform_device_register(&ar7_udc); -+ -+ return res; -+} -+ -+ -+arch_initcall(ar7_register_devices); -diff -Nur linux-2.6.30.5.orig/arch/mips/ar7/prom.c linux-2.6.30.5/arch/mips/ar7/prom.c ---- linux-2.6.30.5.orig/arch/mips/ar7/prom.c 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.30.5/arch/mips/ar7/prom.c 2009-08-26 20:05:03.000000000 +0200 -@@ -0,0 +1,321 @@ -+/* -+ * Carsten Langgaard, carstenl@mips.com -+ * Copyright (C) 1999,2000 MIPS Technologies, Inc. All rights reserved. -+ * -+ * This program is free software; you can distribute it and/or modify it -+ * under the terms of the GNU General Public License (Version 2) as -+ * published by the Free Software Foundation. -+ * -+ * This program is distributed in the hope it will be useful, but WITHOUT -+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or -+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License -+ * for more details. -+ * -+ * You should have received a copy of the GNU General Public License along -+ * with this program; if not, write to the Free Software Foundation, Inc., -+ * 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. -+ * -+ * Putting things on the screen/serial line using YAMONs facilities. -+ */ -+#include <linux/init.h> -+#include <linux/kernel.h> -+#include <linux/serial_reg.h> -+#include <linux/spinlock.h> -+#include <linux/module.h> -+#include <linux/string.h> -+#include <linux/io.h> -+#include <asm/bootinfo.h> -+ -+#include <asm/ar7/ar7.h> -+#include <asm/ar7/prom.h> -+ -+#define MAX_ENTRY 80 -+ -+struct env_var { -+ char *name; -+ char *value; -+}; -+ -+static struct env_var adam2_env[MAX_ENTRY] = { { 0, }, }; -+ -+char *prom_getenv(const char *name) -+{ -+ int i; -+ for (i = 0; (i < MAX_ENTRY) && adam2_env[i].name; i++) -+ if (!strcmp(name, adam2_env[i].name)) -+ return adam2_env[i].value; -+ -+ return NULL; -+} -+EXPORT_SYMBOL(prom_getenv); -+ -+char * __init prom_getcmdline(void) -+{ -+ return &(arcs_cmdline[0]); -+} -+ -+static void __init ar7_init_cmdline(int argc, char *argv[]) -+{ -+ char *cp; -+ int actr; -+ -+ actr = 1; /* Always ignore argv[0] */ -+ -+ cp = &(arcs_cmdline[0]); -+ while (actr < argc) { -+ strcpy(cp, argv[actr]); -+ cp += strlen(argv[actr]); -+ *cp++ = ' '; -+ actr++; -+ } -+ if (cp != &(arcs_cmdline[0])) { -+ /* get rid of trailing space */ -+ --cp; -+ *cp = '\0'; -+ } -+} -+ -+struct psbl_rec { -+ u32 psbl_size; -+ u32 env_base; -+ u32 env_size; -+ u32 ffs_base; -+ u32 ffs_size; -+}; -+ -+static __initdata char psp_env_version[] = "TIENV0.8"; -+ -+struct psp_env_chunk { -+ u8 num; -+ u8 ctrl; -+ u16 csum; -+ u8 len; -+ char data[11]; -+} __attribute__ ((packed)); -+ -+struct psp_var_map_entry { -+ u8 num; -+ char *value; -+}; -+ -+static struct psp_var_map_entry psp_var_map[] = { -+ { 1, "cpufrequency" }, -+ { 2, "memsize" }, -+ { 3, "flashsize" }, -+ { 4, "modetty0" }, -+ { 5, "modetty1" }, -+ { 8, "maca" }, -+ { 9, "macb" }, -+ { 28, "sysfrequency" }, -+ { 38, "mipsfrequency" }, -+}; -+ -+/* -+ -+Well-known variable (num is looked up in table above for matching variable name) -+Example: cpufrequency=211968000 -++----+----+----+----+----+----+----+----+----+----+----+----+----+----+----+--- -+| 01 |CTRL|CHECKSUM | 01 | _2 | _1 | _1 | _9 | _6 | _8 | _0 | _0 | _0 | \0 | FF -++----+----+----+----+----+----+----+----+----+----+----+----+----+----+----+--- -+ -+Name=Value pair in a single chunk -+Example: NAME=VALUE -++----+----+----+----+----+----+----+----+----+----+----+----+----+----+----+--- -+| 00 |CTRL|CHECKSUM | 01 | _N | _A | _M | _E | _0 | _V | _A | _L | _U | _E | \0 -++----+----+----+----+----+----+----+----+----+----+----+----+----+----+----+--- -+ -+Name=Value pair in 2 chunks (len is the number of chunks) -+Example: bootloaderVersion=1.3.7.15 -++----+----+----+----+----+----+----+----+----+----+----+----+----+----+----+--- -+| 00 |CTRL|CHECKSUM | 02 | _b | _o | _o | _t | _l | _o | _a | _d | _e | _r | _V -++----+----+----+----+----+----+----+----+----+----+----+----+----+----+----+--- -+| _e | _r | _s | _i | _o | _n | \0 | _1 | _. | _3 | _. | _7 | _. | _1 | _5 | \0 -++----+----+----+----+----+----+----+----+----+----+----+----+----+----+----+--- -+ -+Data is padded with 0xFF -+ -+*/ -+ -+#define PSP_ENV_SIZE 4096 -+ -+static char psp_env_data[PSP_ENV_SIZE] = { 0, }; -+ -+static char * __init lookup_psp_var_map(u8 num) -+{ -+ int i; -+ -+ for (i = 0; i < sizeof(psp_var_map); i++) -+ if (psp_var_map[i].num == num) -+ return psp_var_map[i].value; -+ -+ return NULL; -+} -+ -+static void __init add_adam2_var(char *name, char *value) -+{ -+ int i; -+ for (i = 0; i < MAX_ENTRY; i++) { -+ if (!adam2_env[i].name) { -+ adam2_env[i].name = name; -+ adam2_env[i].value = value; -+ return; -+ } else if (!strcmp(adam2_env[i].name, name)) { -+ adam2_env[i].value = value; -+ return; -+ } -+ } -+} -+ -+static int __init parse_psp_env(void *psp_env_base) -+{ -+ int i, n; -+ char *name, *value; -+ struct psp_env_chunk *chunks = (struct psp_env_chunk *)psp_env_data; -+ -+ memcpy_fromio(chunks, psp_env_base, PSP_ENV_SIZE); -+ -+ i = 1; -+ n = PSP_ENV_SIZE / sizeof(struct psp_env_chunk); -+ while (i < n) { -+ if ((chunks[i].num == 0xff) || ((i + chunks[i].len) > n)) -+ break; -+ value = chunks[i].data; -+ if (chunks[i].num) { -+ name = lookup_psp_var_map(chunks[i].num); -+ } else { -+ name = value; -+ value += strlen(name) + 1; -+ } -+ if (name) -+ add_adam2_var(name, value); -+ i += chunks[i].len; -+ } -+ return 0; -+} -+ -+static void __init ar7_init_env(struct env_var *env) -+{ -+ int i; -+ struct psbl_rec *psbl = (struct psbl_rec *)(KSEG1ADDR(0x14000300)); -+ void *psp_env = (void *)KSEG1ADDR(psbl->env_base); -+ -+ if (strcmp(psp_env, psp_env_version) == 0) { -+ parse_psp_env(psp_env); -+ } else { -+ for (i = 0; i < MAX_ENTRY; i++, env++) -+ if (env->name) -+ add_adam2_var(env->name, env->value); -+ } -+} -+ -+static void __init console_config(void) -+{ -+#ifdef CONFIG_SERIAL_8250_CONSOLE -+ char console_string[40]; -+ int baud = 0; -+ char parity = '\0', bits = '\0', flow = '\0'; -+ char *s, *p; -+ -+ if (strstr(prom_getcmdline(), "console=")) -+ return; -+ -+#ifdef CONFIG_KGDB -+ if (!strstr(prom_getcmdline(), "nokgdb")) { -+ strcat(prom_getcmdline(), " console=kgdb"); -+ kgdb_enabled = 1; -+ return; -+ } -+#endif -+ -+ if ((s = prom_getenv("modetty0"))) { -+ baud = simple_strtoul(s, &p, 10); -+ s = p; -+ if (*s == ',') s++; -+ if (*s) parity = *s++; -+ if (*s == ',') s++; -+ if (*s) bits = *s++; -+ if (*s == ',') s++; -+ if (*s == 'h') flow = 'r'; -+ } -+ -+ if (baud == 0) -+ baud = 38400; -+ if (parity != 'n' && parity != 'o' && parity != 'e') -+ parity = 'n'; -+ if (bits != '7' && bits != '8') -+ bits = '8'; -+ -+ if (flow == 'r') -+ sprintf(console_string, " console=ttyS0,%d%c%c%c", baud, -+ parity, bits, flow); -+ else -+ sprintf(console_string, " console=ttyS0,%d%c%c", baud, parity, -+ bits); -+ strcat(prom_getcmdline(), console_string); -+#endif -+} -+ -+void __init prom_init(void) -+{ -+ ar7_init_cmdline(fw_arg0, (char **)fw_arg1); -+ ar7_init_env((struct env_var *)fw_arg2); -+ console_config(); -+} -+ -+#define PORT(offset) (KSEG1ADDR(AR7_REGS_UART0 + (offset * 4))) -+static inline unsigned int serial_in(int offset) -+{ -+ return readb((void *)PORT(offset)); -+} -+ -+static inline void serial_out(int offset, int value) -+{ -+ writeb(value, (void *)PORT(offset)); -+} -+ -+char prom_getchar(void) -+{ -+ while (!(serial_in(UART_LSR) & UART_LSR_DR)); -+ return serial_in(UART_RX); -+} -+ -+int prom_putchar(char c) -+{ -+ while ((serial_in(UART_LSR) & UART_LSR_TEMT) == 0); -+ serial_out(UART_TX, c); -+ return 1; -+} -+ -+/* from adm5120/prom.c */ -+void prom_printf(const char *fmt, ...) -+{ -+ va_list args; -+ int l; -+ char *p, *buf_end; -+ char buf[1024]; -+ -+ va_start(args, fmt); -+ l = vsprintf(buf, fmt, args); /* hopefully i < sizeof(buf) */ -+ va_end(args); -+ -+ buf_end = buf + l; -+ -+ for (p = buf; p < buf_end; p++) { -+ /* Crude cr/nl handling is better than none */ -+ if (*p == '\n') -+ prom_putchar('\r'); -+ prom_putchar(*p); -+ } -+} -+ -+#ifdef CONFIG_KGDB -+int putDebugChar(char c) -+{ -+ return prom_putchar(c); -+} -+ -+char getDebugChar(void) -+{ -+ return prom_getchar(); -+} -+#endif -diff -Nur linux-2.6.30.5.orig/arch/mips/ar7/setup.c linux-2.6.30.5/arch/mips/ar7/setup.c ---- linux-2.6.30.5.orig/arch/mips/ar7/setup.c 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.30.5/arch/mips/ar7/setup.c 2009-08-26 20:05:03.000000000 +0200 -@@ -0,0 +1,105 @@ -+/* -+ * Carsten Langgaard, carstenl@mips.com -+ * Copyright (C) 2000 MIPS Technologies, Inc. All rights reserved. -+ * -+ * This program is free software; you can distribute it and/or modify it -+ * under the terms of the GNU General Public License (Version 2) as -+ * published by the Free Software Foundation. -+ * -+ * This program is distributed in the hope it will be useful, but WITHOUT -+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or -+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License -+ * for more details. -+ * -+ * You should have received a copy of the GNU General Public License along -+ * with this program; if not, write to the Free Software Foundation, Inc., -+ * 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. -+ */ -+#include <linux/version.h> -+#include <linux/init.h> -+#include <linux/ioport.h> -+#include <linux/pm.h> -+ -+#include <asm/reboot.h> -+#include <asm/time.h> -+#include <asm/ar7/ar7.h> -+#include <asm/ar7/prom.h> -+ -+static void ar7_machine_restart(char *command); -+static void ar7_machine_halt(void); -+static void ar7_machine_power_off(void); -+ -+static void ar7_machine_restart(char *command) -+{ -+ u32 *softres_reg = (u32 *)ioremap(AR7_REGS_RESET + -+ AR7_RESET_SOFTWARE, 1); -+ writel(1, softres_reg); -+} -+ -+static void ar7_machine_halt(void) -+{ -+ while (1); -+} -+ -+static void ar7_machine_power_off(void) -+{ -+ u32 *power_reg = (u32 *)ioremap(AR7_REGS_POWER, 1); -+ u32 power_state = readl(power_reg) | (3 << 30); -+ writel(power_state, power_reg); -+ ar7_machine_halt(); -+} -+ -+const char *get_system_type(void) -+{ -+ u16 chip_id = ar7_chip_id(); -+ switch (chip_id) { -+ case AR7_CHIP_7300: -+ return "TI AR7 (TNETD7300)"; -+ case AR7_CHIP_7100: -+ return "TI AR7 (TNETD7100)"; -+ case AR7_CHIP_7200: -+ return "TI AR7 (TNETD7200)"; -+ default: -+ return "TI AR7 (Unknown)"; -+ } -+} -+ -+static int __init ar7_init_console(void) -+{ -+ return 0; -+} -+ -+/* -+ * Initializes basic routines and structures pointers, memory size (as -+ * given by the bios and saves the command line. -+ */ -+ -+extern void ar7_init_clocks(void); -+ -+void __init plat_mem_setup(void) -+{ -+ unsigned long io_base; -+ -+ _machine_restart = ar7_machine_restart; -+ _machine_halt = ar7_machine_halt; -+ pm_power_off = ar7_machine_power_off; -+ panic_timeout = 3; -+ -+ io_base = (unsigned long)ioremap(AR7_REGS_BASE, 0x10000); -+ if (!io_base) panic("Can't remap IO base!\n"); -+ set_io_port_base(io_base); -+ -+ prom_meminit(); -+ ar7_init_clocks(); -+ -+ ioport_resource.start = 0; -+ ioport_resource.end = ~0; -+ iomem_resource.start = 0; -+ iomem_resource.end = ~0; -+ -+ printk(KERN_INFO "%s, ID: 0x%04x, Revision: 0x%02x\n", -+ get_system_type(), -+ ar7_chip_id(), ar7_chip_rev()); -+} -+ -+console_initcall(ar7_init_console); -diff -Nur linux-2.6.30.5.orig/arch/mips/ar7/time.c linux-2.6.30.5/arch/mips/ar7/time.c ---- linux-2.6.30.5.orig/arch/mips/ar7/time.c 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.30.5/arch/mips/ar7/time.c 2009-08-26 20:05:03.000000000 +0200 -@@ -0,0 +1,28 @@ -+/* -+ * Carsten Langgaard, carstenl@mips.com -+ * Copyright (C) 1999,2000 MIPS Technologies, Inc. All rights reserved. -+ * -+ * This program is free software; you can distribute it and/or modify it -+ * under the terms of the GNU General Public License (Version 2) as -+ * published by the Free Software Foundation. -+ * -+ * This program is distributed in the hope it will be useful, but WITHOUT -+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or -+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License -+ * for more details. -+ * -+ * You should have received a copy of the GNU General Public License along -+ * with this program; if not, write to the Free Software Foundation, Inc., -+ * 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. -+ * -+ * Setting up the clock on the MIPS boards. -+ */ -+ -+#include <linux/version.h> -+#include <asm/time.h> -+#include <asm/ar7/ar7.h> -+ -+void __init plat_time_init(void) -+{ -+ mips_hpt_frequency = ar7_cpu_freq() / 2; -+} -diff -Nur linux-2.6.30.5.orig/arch/mips/include/asm/ar7/ar7.h linux-2.6.30.5/arch/mips/include/asm/ar7/ar7.h ---- linux-2.6.30.5.orig/arch/mips/include/asm/ar7/ar7.h 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.30.5/arch/mips/include/asm/ar7/ar7.h 2009-08-26 20:05:03.000000000 +0200 -@@ -0,0 +1,170 @@ -+/* -+ * Copyright (C) 2006,2007 Felix Fietkau <nbd@openwrt.org> -+ * Copyright (C) 2006,2007 Eugene Konev <ejka@openwrt.org> -+ * -+ * This program is free software; you can redistribute it and/or modify -+ * it under the terms of the GNU General Public License as published by -+ * the Free Software Foundation; either version 2 of the License, or -+ * (at your option) any later version. -+ * -+ * This program is distributed in the hope that it will be useful, -+ * but WITHOUT ANY WARRANTY; without even the implied warranty of -+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -+ * GNU General Public License for more details. -+ * -+ * You should have received a copy of the GNU General Public License -+ * along with this program; if not, write to the Free Software -+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA -+ */ -+ -+#ifndef __AR7_H__ -+#define __AR7_H__ -+ -+#include <linux/delay.h> -+#include <asm/addrspace.h> -+#include <linux/io.h> -+ -+#define AR7_REGS_BASE 0x08610000 -+ -+#define AR7_REGS_MAC0 (AR7_REGS_BASE + 0x0000) -+#define AR7_REGS_GPIO (AR7_REGS_BASE + 0x0900) -+/* 0x08610A00 - 0x08610BFF (512 bytes, 128 bytes / clock) */ -+#define AR7_REGS_POWER (AR7_REGS_BASE + 0x0a00) -+#define AR7_REGS_UART0 (AR7_REGS_BASE + 0x0e00) -+#define AR7_REGS_USB (AR7_REGS_BASE + 0x1200) -+#define AR7_REGS_RESET (AR7_REGS_BASE + 0x1600) -+#define AR7_REGS_VLYNQ0 (AR7_REGS_BASE + 0x1800) -+#define AR7_REGS_DCL (AR7_REGS_BASE + 0x1a00) -+#define AR7_REGS_VLYNQ1 (AR7_REGS_BASE + 0x1c00) -+#define AR7_REGS_MDIO (AR7_REGS_BASE + 0x1e00) -+#define AR7_REGS_IRQ (AR7_REGS_BASE + 0x2400) -+#define AR7_REGS_MAC1 (AR7_REGS_BASE + 0x2800) -+ -+#define AR7_REGS_WDT (AR7_REGS_BASE + 0x1f00) -+#define UR8_REGS_WDT (AR7_REGS_BASE + 0x0b00) -+#define UR8_REGS_UART1 (AR7_REGS_BASE + 0x0f00) -+ -+#define AR7_RESET_PEREPHERIAL 0x0 -+#define AR7_RESET_SOFTWARE 0x4 -+#define AR7_RESET_STATUS 0x8 -+ -+#define AR7_RESET_BIT_CPMAC_LO 17 -+#define AR7_RESET_BIT_CPMAC_HI 21 -+#define AR7_RESET_BIT_MDIO 22 -+#define AR7_RESET_BIT_EPHY 26 -+ -+/* GPIO control registers */ -+#define AR7_GPIO_INPUT 0x0 -+#define AR7_GPIO_OUTPUT 0x4 -+#define AR7_GPIO_DIR 0x8 -+#define AR7_GPIO_ENABLE 0xc -+ -+#define AR7_CHIP_7100 0x18 -+#define AR7_CHIP_7200 0x2b -+#define AR7_CHIP_7300 0x05 -+ -+/* Interrupts */ -+#define AR7_IRQ_UART0 15 -+#define AR7_IRQ_UART1 16 -+ -+/* Clocks */ -+#define AR7_AFE_CLOCK 35328000 -+#define AR7_REF_CLOCK 25000000 -+#define AR7_XTAL_CLOCK 24000000 -+ -+struct plat_cpmac_data { -+ int reset_bit; -+ int power_bit; -+ u32 phy_mask; -+ char dev_addr[6]; -+}; -+ -+struct plat_dsl_data { -+ int reset_bit_dsl; -+ int reset_bit_sar; -+}; -+ -+extern int ar7_cpu_clock, ar7_bus_clock, ar7_dsp_clock; -+ -+static inline u16 ar7_chip_id(void) -+{ -+ return readl((void *)KSEG1ADDR(AR7_REGS_GPIO + 0x14)) & 0xffff; -+} -+ -+static inline u8 ar7_chip_rev(void) -+{ -+ return (readl((void *)KSEG1ADDR(AR7_REGS_GPIO + 0x14)) >> 16) & 0xff; -+} -+ -+static inline int ar7_cpu_freq(void) -+{ -+ return ar7_cpu_clock; -+} -+ -+static inline int ar7_bus_freq(void) -+{ -+ return ar7_bus_clock; -+} -+ -+static inline int ar7_vbus_freq(void) -+{ -+ return ar7_bus_clock / 2; -+} -+#define ar7_cpmac_freq ar7_vbus_freq -+ -+static inline int ar7_dsp_freq(void) -+{ -+ return ar7_dsp_clock; -+} -+ -+static inline int ar7_has_high_cpmac(void) -+{ -+ u16 chip_id = ar7_chip_id(); -+ switch (chip_id) { -+ case AR7_CHIP_7100: -+ case AR7_CHIP_7200: -+ return 0; -+ default: -+ return 1; -+ } -+} -+#define ar7_has_high_vlynq ar7_has_high_cpmac -+#define ar7_has_second_uart ar7_has_high_cpmac -+ -+static inline void ar7_device_enable(u32 bit) -+{ -+ void *reset_reg = -+ (void *)KSEG1ADDR(AR7_REGS_RESET + AR7_RESET_PEREPHERIAL); -+ writel(readl(reset_reg) | (1 << bit), reset_reg); -+ mdelay(20); -+} -+ -+static inline void ar7_device_disable(u32 bit) -+{ -+ void *reset_reg = -+ (void *)KSEG1ADDR(AR7_REGS_RESET + AR7_RESET_PEREPHERIAL); -+ writel(readl(reset_reg) & ~(1 << bit), reset_reg); -+ mdelay(20); -+} -+ -+static inline void ar7_device_reset(u32 bit) -+{ -+ ar7_device_disable(bit); -+ ar7_device_enable(bit); -+} -+ -+static inline void ar7_device_on(u32 bit) -+{ -+ void *power_reg = (void *)KSEG1ADDR(AR7_REGS_POWER); -+ writel(readl(power_reg) | (1 << bit), power_reg); -+ mdelay(20); -+} -+ -+static inline void ar7_device_off(u32 bit) -+{ -+ void *power_reg = (void *)KSEG1ADDR(AR7_REGS_POWER); -+ writel(readl(power_reg) & ~(1 << bit), power_reg); -+ mdelay(20); -+} -+ -+#endif /* __AR7_H__ */ -diff -Nur linux-2.6.30.5.orig/arch/mips/include/asm/ar7/gpio.h linux-2.6.30.5/arch/mips/include/asm/ar7/gpio.h ---- linux-2.6.30.5.orig/arch/mips/include/asm/ar7/gpio.h 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.30.5/arch/mips/include/asm/ar7/gpio.h 2009-08-26 20:05:03.000000000 +0200 -@@ -0,0 +1,109 @@ -+/* -+ * Copyright (C) 2007 Florian Fainelli <florian@openwrt.org> -+ * -+ * This program is free software; you can redistribute it and/or modify -+ * it under the terms of the GNU General Public License as published by -+ * the Free Software Foundation; either version 2 of the License, or -+ * (at your option) any later version. -+ * -+ * This program is distributed in the hope that it will be useful, -+ * but WITHOUT ANY WARRANTY; without even the implied warranty of -+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -+ * GNU General Public License for more details. -+ * -+ * You should have received a copy of the GNU General Public License -+ * along with this program; if not, write to the Free Software -+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA -+ */ -+ -+#ifndef __AR7_GPIO_H__ -+#define __AR7_GPIO_H__ -+#include <asm/ar7/ar7.h> -+ -+#define AR7_GPIO_MAX 32 -+ -+extern int gpio_request(unsigned gpio, const char *label); -+extern void gpio_free(unsigned gpio); -+ -+/* Common GPIO layer */ -+static inline int gpio_get_value(unsigned gpio) -+{ -+ void __iomem *gpio_in = -+ (void __iomem *)KSEG1ADDR(AR7_REGS_GPIO + AR7_GPIO_INPUT); -+ -+ return readl(gpio_in) & (1 << gpio); -+} -+ -+static inline void gpio_set_value(unsigned gpio, int value) -+{ -+ void __iomem *gpio_out = -+ (void __iomem *)KSEG1ADDR(AR7_REGS_GPIO + AR7_GPIO_OUTPUT); -+ unsigned tmp; -+ -+ tmp = readl(gpio_out) & ~(1 << gpio); -+ if (value) -+ tmp |= 1 << gpio; -+ writel(tmp, gpio_out); -+} -+ -+static inline int gpio_direction_input(unsigned gpio) -+{ -+ void __iomem *gpio_dir = -+ (void __iomem *)KSEG1ADDR(AR7_REGS_GPIO + AR7_GPIO_DIR); -+ -+ if (gpio >= AR7_GPIO_MAX) -+ return -EINVAL; -+ -+ writel(readl(gpio_dir) | (1 << gpio), gpio_dir); -+ -+ return 0; -+} -+ -+static inline int gpio_direction_output(unsigned gpio, int value) -+{ -+ void __iomem *gpio_dir = -+ (void __iomem *)KSEG1ADDR(AR7_REGS_GPIO + AR7_GPIO_DIR); -+ -+ if (gpio >= AR7_GPIO_MAX) -+ return -EINVAL; -+ -+ gpio_set_value(gpio, value); -+ writel(readl(gpio_dir) & ~(1 << gpio), gpio_dir); -+ -+ return 0; -+} -+ -+static inline int gpio_to_irq(unsigned gpio) -+{ -+ return -EINVAL; -+} -+ -+static inline int irq_to_gpio(unsigned irq) -+{ -+ return -EINVAL; -+} -+ -+/* Board specific GPIO functions */ -+static inline int ar7_gpio_enable(unsigned gpio) -+{ -+ void __iomem *gpio_en = -+ (void __iomem *)KSEG1ADDR(AR7_REGS_GPIO + AR7_GPIO_ENABLE); -+ -+ writel(readl(gpio_en) | (1 << gpio), gpio_en); -+ -+ return 0; -+} -+ -+static inline int ar7_gpio_disable(unsigned gpio) -+{ -+ void __iomem *gpio_en = -+ (void __iomem *)KSEG1ADDR(AR7_REGS_GPIO + AR7_GPIO_ENABLE); -+ -+ writel(readl(gpio_en) & ~(1 << gpio), gpio_en); -+ -+ return 0; -+} -+ -+#include <asm-generic/gpio.h> -+ -+#endif -diff -Nur linux-2.6.30.5.orig/arch/mips/include/asm/ar7/irq.h linux-2.6.30.5/arch/mips/include/asm/ar7/irq.h ---- linux-2.6.30.5.orig/arch/mips/include/asm/ar7/irq.h 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.30.5/arch/mips/include/asm/ar7/irq.h 2009-08-26 20:05:03.000000000 +0200 -@@ -0,0 +1,16 @@ -+/* -+ * This file is subject to the terms and conditions of the GNU General Public -+ * License. See the file "COPYING" in the main directory of this archive -+ * for more details. -+ * -+ * Shamelessly copied from asm-mips/mach-emma2rh/ -+ * Copyright (C) 2003 by Ralf Baechle -+ */ -+#ifndef __ASM_AR7_IRQ_H -+#define __ASM_AR7_IRQ_H -+ -+#define NR_IRQS 256 -+ -+#include_next <irq.h> -+ -+#endif /* __ASM_AR7_IRQ_H */ -diff -Nur linux-2.6.30.5.orig/arch/mips/include/asm/ar7/prom.h linux-2.6.30.5/arch/mips/include/asm/ar7/prom.h ---- linux-2.6.30.5.orig/arch/mips/include/asm/ar7/prom.h 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.30.5/arch/mips/include/asm/ar7/prom.h 2009-08-26 20:05:03.000000000 +0200 -@@ -0,0 +1,26 @@ -+/* -+ * Copyright (C) 2006, 2007 Florian Fainelli <florian@openwrt.org> -+ * -+ * This program is free software; you can redistribute it and/or modify -+ * it under the terms of the GNU General Public License as published by -+ * the Free Software Foundation; either version 2 of the License, or -+ * (at your option) any later version. -+ * -+ * This program is distributed in the hope that it will be useful, -+ * but WITHOUT ANY WARRANTY; without even the implied warranty of -+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -+ * GNU General Public License for more details. -+ * -+ * You should have received a copy of the GNU General Public License -+ * along with this program; if not, write to the Free Software -+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA -+ */ -+ -+#ifndef __PROM_H__ -+#define __PROM_H__ -+ -+extern char *prom_getenv(const char *name); -+extern void prom_printf(const char *fmt, ...) __attribute__((format(printf, 1, 2))); -+extern void prom_meminit(void); -+ -+#endif /* __PROM_H__ */ -diff -Nur linux-2.6.30.5.orig/arch/mips/include/asm/ar7/spaces.h linux-2.6.30.5/arch/mips/include/asm/ar7/spaces.h ---- linux-2.6.30.5.orig/arch/mips/include/asm/ar7/spaces.h 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.30.5/arch/mips/include/asm/ar7/spaces.h 2009-08-26 20:05:03.000000000 +0200 -@@ -0,0 +1,32 @@ -+/* -+ * This file is subject to the terms and conditions of the GNU General Public -+ * License. See the file "COPYING" in the main directory of this archive -+ * for more details. -+ * -+ * Copyright (C) 1994 - 1999, 2000, 03, 04 Ralf Baechle -+ * Copyright (C) 2000, 2002 Maciej W. Rozycki -+ * Copyright (C) 1990, 1999, 2000 Silicon Graphics, Inc. -+ */ -+#ifndef _ASM_AR7_SPACES_H -+#define _ASM_AR7_SPACES_H -+ -+#define CAC_BASE 0x80000000 -+#define IO_BASE 0xa0000000 -+#define UNCAC_BASE 0xa0000000 -+#define MAP_BASE 0xc0000000 -+ -+/* -+ * This handles the memory map. -+ * We handle pages at KSEG0 for kernels with 32 bit address space. -+ */ -+#define PAGE_OFFSET 0x94000000UL -+#define PHYS_OFFSET 0x14000000UL -+ -+/* -+ * Memory above this physical address will be considered highmem. -+ */ -+#ifndef HIGHMEM_START -+#define HIGHMEM_START 0x40000000UL -+#endif -+ -+#endif /* __ASM_AR7_SPACES_H */ -diff -Nur linux-2.6.30.5.orig/arch/mips/include/asm/ar7/war.h linux-2.6.30.5/arch/mips/include/asm/ar7/war.h ---- linux-2.6.30.5.orig/arch/mips/include/asm/ar7/war.h 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.30.5/arch/mips/include/asm/ar7/war.h 2009-08-26 20:05:03.000000000 +0200 -@@ -0,0 +1,25 @@ -+/* -+ * This file is subject to the terms and conditions of the GNU General Public -+ * License. See the file "COPYING" in the main directory of this archive -+ * for more details. -+ * -+ * Copyright (C) 2002, 2004, 2007 by Ralf Baechle <ralf@linux-mips.org> -+ */ -+#ifndef __ASM_MIPS_MACH_BCM947XX_WAR_H -+#define __ASM_MIPS_MACH_BCM947XX_WAR_H -+ -+#define R4600_V1_INDEX_ICACHEOP_WAR 0 -+#define R4600_V1_HIT_CACHEOP_WAR 0 -+#define R4600_V2_HIT_CACHEOP_WAR 0 -+#define R5432_CP0_INTERRUPT_WAR 0 -+#define BCM1250_M3_WAR 0 -+#define SIBYTE_1956_WAR 0 -+#define MIPS4K_ICACHE_REFILL_WAR 0 -+#define MIPS_CACHE_SYNC_WAR 0 -+#define TX49XX_ICACHE_INDEX_INV_WAR 0 -+#define RM9000_CDEX_SMP_WAR 0 -+#define ICACHE_REFILLS_WORKAROUND_WAR 0 -+#define R10000_LLSC_WAR 0 -+#define MIPS34K_MISSED_ITLB_WAR 0 -+ -+#endif /* __ASM_MIPS_MACH_BCM947XX_WAR_H */ -diff -Nur linux-2.6.30.5.orig/arch/mips/include/asm/page.h linux-2.6.30.5/arch/mips/include/asm/page.h ---- linux-2.6.30.5.orig/arch/mips/include/asm/page.h 2009-08-16 23:19:38.000000000 +0200 -+++ linux-2.6.30.5/arch/mips/include/asm/page.h 2009-08-26 20:05:14.000000000 +0200 -@@ -185,8 +185,10 @@ - #define VM_DATA_DEFAULT_FLAGS (VM_READ | VM_WRITE | VM_EXEC | \ - VM_MAYREAD | VM_MAYWRITE | VM_MAYEXEC) - --#define UNCAC_ADDR(addr) ((addr) - PAGE_OFFSET + UNCAC_BASE) --#define CAC_ADDR(addr) ((addr) - UNCAC_BASE + PAGE_OFFSET) -+#define UNCAC_ADDR(addr) ((addr) - PAGE_OFFSET + UNCAC_BASE + \ -+ PHYS_OFFSET) -+#define CAC_ADDR(addr) ((addr) - UNCAC_BASE + PAGE_OFFSET - \ -+ PHYS_OFFSET) - - #include <asm-generic/memory_model.h> - #include <asm-generic/page.h> -diff -Nur linux-2.6.30.5.orig/arch/mips/Kconfig linux-2.6.30.5/arch/mips/Kconfig ---- linux-2.6.30.5.orig/arch/mips/Kconfig 2009-08-16 23:19:38.000000000 +0200 -+++ linux-2.6.30.5/arch/mips/Kconfig 2009-08-27 21:44:10.000000000 +0200 -@@ -19,6 +19,23 @@ - prompt "System type" - default SGI_IP22 - -+config AR7 -+ bool "Texas Instruments AR7" -+ select BOOT_ELF32 -+ select DMA_NONCOHERENT -+ select CEVT_R4K -+ select CSRC_R4K -+ select IRQ_CPU -+ select SWAP_IO_SPACE -+ select SYS_HAS_CPU_MIPS32_R1 -+ select SYS_HAS_EARLY_PRINTK -+ select SYS_SUPPORTS_32BIT_KERNEL -+ select SYS_SUPPORTS_KGDB -+ select SYS_SUPPORTS_LITTLE_ENDIAN -+ select SYS_SUPPORTS_BIG_ENDIAN -+ select GENERIC_GPIO -+ select GENERIC_HARDIRQS_NO__DO_IRQ -+ - config MACH_ALCHEMY - bool "Alchemy processor based machines" - -diff -Nur linux-2.6.30.5.orig/arch/mips/kernel/traps.c linux-2.6.30.5/arch/mips/kernel/traps.c ---- linux-2.6.30.5.orig/arch/mips/kernel/traps.c 2009-08-16 23:19:38.000000000 +0200 -+++ linux-2.6.30.5/arch/mips/kernel/traps.c 2009-08-26 20:05:14.000000000 +0200 -@@ -1256,9 +1256,22 @@ - - exception_handlers[n] = handler; - if (n == 0 && cpu_has_divec) { -- *(u32 *)(ebase + 0x200) = 0x08000000 | -- (0x03ffffff & (handler >> 2)); -- local_flush_icache_range(ebase + 0x200, ebase + 0x204); -+ if ((handler ^ (ebase + 4)) & 0xfc000000) { -+ /* lui k0, 0x0000 */ -+ *(u32 *)(ebase + 0x200) = 0x3c1a0000 | (handler >> 16); -+ /* ori k0, 0x0000 */ -+ *(u32 *)(ebase + 0x204) = -+ 0x375a0000 | (handler & 0xffff); -+ /* jr k0 */ -+ *(u32 *)(ebase + 0x208) = 0x03400008; -+ /* nop */ -+ *(u32 *)(ebase + 0x20C) = 0x00000000; -+ flush_icache_range(ebase + 0x200, ebase + 0x210); -+ } else { -+ *(u32 *)(ebase + 0x200) = -+ 0x08000000 | (0x03ffffff & (handler >> 2)); -+ flush_icache_range(ebase + 0x200, ebase + 0x204); -+ } - } - return (void *)old_handler; - } -diff -Nur linux-2.6.30.5.orig/arch/mips/Makefile linux-2.6.30.5/arch/mips/Makefile ---- linux-2.6.30.5.orig/arch/mips/Makefile 2009-08-16 23:19:38.000000000 +0200 -+++ linux-2.6.30.5/arch/mips/Makefile 2009-08-26 20:05:14.000000000 +0200 -@@ -174,6 +174,13 @@ - # - - # -+# Texas Instruments AR7 -+# -+core-$(CONFIG_AR7) += arch/mips/ar7/ -+cflags-$(CONFIG_AR7) += -Iinclude/asm-mips/ar7 -+load-$(CONFIG_AR7) += 0xffffffff94100000 -+ -+# - # Acer PICA 61, Mips Magnum 4000 and Olivetti M700. - # - core-$(CONFIG_MACH_JAZZ) += arch/mips/jazz/ -diff -Nur linux-2.6.30.5.orig/drivers/char/ar7_gpio.c linux-2.6.30.5/drivers/char/ar7_gpio.c ---- linux-2.6.30.5.orig/drivers/char/ar7_gpio.c 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.30.5/drivers/char/ar7_gpio.c 2009-08-26 20:05:03.000000000 +0200 -@@ -0,0 +1,158 @@ -+/* -+ * Copyright (C) 2007 Nicolas Thill <nico@openwrt.org> -+ * -+ * This program is free software; you can redistribute it and/or modify -+ * it under the terms of the GNU General Public License as published by -+ * the Free Software Foundation; either version 2 of the License, or -+ * (at your option) any later version. -+ * -+ * This program is distributed in the hope that it will be useful, -+ * but WITHOUT ANY WARRANTY; without even the implied warranty of -+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -+ * GNU General Public License for more details. -+ * -+ * You should have received a copy of the GNU General Public License -+ * along with this program; if not, write to the Free Software -+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA -+ */ -+ -+#include <linux/device.h> -+#include <linux/fs.h> -+#include <linux/module.h> -+#include <linux/errno.h> -+#include <linux/kernel.h> -+#include <linux/init.h> -+#include <linux/platform_device.h> -+#include <linux/uaccess.h> -+#include <linux/io.h> -+#include <linux/types.h> -+#include <linux/cdev.h> -+#include <gpio.h> -+ -+#define DRVNAME "ar7_gpio" -+#define LONGNAME "TI AR7 GPIOs Driver" -+ -+MODULE_AUTHOR("Nicolas Thill <nico@openwrt.org>"); -+MODULE_DESCRIPTION(LONGNAME); -+MODULE_LICENSE("GPL"); -+ -+static int ar7_gpio_major; -+ -+static ssize_t ar7_gpio_write(struct file *file, const char __user *buf, -+ size_t len, loff_t *ppos) -+{ -+ int pin = iminor(file->f_dentry->d_inode); -+ size_t i; -+ -+ for (i = 0; i < len; ++i) { -+ char c; -+ if (get_user(c, buf + i)) -+ return -EFAULT; -+ switch (c) { -+ case '0': -+ gpio_set_value(pin, 0); -+ break; -+ case '1': -+ gpio_set_value(pin, 1); -+ break; -+ case 'd': -+ case 'D': -+ ar7_gpio_disable(pin); -+ break; -+ case 'e': -+ case 'E': -+ ar7_gpio_enable(pin); -+ break; -+ case 'i': -+ case 'I': -+ case '<': -+ gpio_direction_input(pin); -+ break; -+ case 'o': -+ case 'O': -+ case '>': -+ gpio_direction_output(pin, 0); -+ break; -+ default: -+ return -EINVAL; -+ } -+ } -+ -+ return len; -+} -+ -+static ssize_t ar7_gpio_read(struct file *file, char __user *buf, -+ size_t len, loff_t *ppos) -+{ -+ int pin = iminor(file->f_dentry->d_inode); -+ int value; -+ -+ value = gpio_get_value(pin); -+ if (put_user(value ? '1' : '0', buf)) -+ return -EFAULT; -+ -+ return 1; -+} -+ -+static int ar7_gpio_open(struct inode *inode, struct file *file) -+{ -+ int m = iminor(inode); -+ -+ if (m >= AR7_GPIO_MAX) -+ return -EINVAL; -+ -+ return nonseekable_open(inode, file); -+} -+ -+static int ar7_gpio_release(struct inode *inode, struct file *file) -+{ -+ return 0; -+} -+ -+static const struct file_operations ar7_gpio_fops = { -+ .owner = THIS_MODULE, -+ .write = ar7_gpio_write, -+ .read = ar7_gpio_read, -+ .open = ar7_gpio_open, -+ .release = ar7_gpio_release, -+ .llseek = no_llseek, -+}; -+ -+static struct platform_device *ar7_gpio_device; -+ -+static int __init ar7_gpio_init(void) -+{ -+ int rc; -+ -+ ar7_gpio_device = platform_device_alloc(DRVNAME, -1); -+ if (!ar7_gpio_device) -+ return -ENOMEM; -+ -+ rc = platform_device_add(ar7_gpio_device); -+ if (rc < 0) -+ goto out_put; -+ -+ rc = register_chrdev(ar7_gpio_major, DRVNAME, &ar7_gpio_fops); -+ if (rc < 0) -+ goto out_put; -+ -+ ar7_gpio_major = rc; -+ -+ rc = 0; -+ -+ goto out; -+ -+out_put: -+ platform_device_put(ar7_gpio_device); -+out: -+ return rc; -+} -+ -+static void __exit ar7_gpio_exit(void) -+{ -+ unregister_chrdev(ar7_gpio_major, DRVNAME); -+ platform_device_unregister(ar7_gpio_device); -+} -+ -+module_init(ar7_gpio_init); -+module_exit(ar7_gpio_exit); -diff -Nur linux-2.6.30.5.orig/drivers/char/Kconfig linux-2.6.30.5/drivers/char/Kconfig ---- linux-2.6.30.5.orig/drivers/char/Kconfig 2009-08-16 23:19:38.000000000 +0200 -+++ linux-2.6.30.5/drivers/char/Kconfig 2009-08-26 20:05:23.000000000 +0200 -@@ -974,6 +974,15 @@ - To compile this driver as a module, choose M here: the - module will be called mwave. - -+config AR7_GPIO -+ tristate "TI AR7 GPIO Support" -+ depends on AR7 -+ help -+ Give userspace access to the GPIO pins on the Texas Instruments AR7 -+ processors. -+ -+ If compiled as a module, it will be called ar7_gpio. -+ - config SCx200_GPIO - tristate "NatSemi SCx200 GPIO Support" - depends on SCx200 -diff -Nur linux-2.6.30.5.orig/drivers/char/Makefile linux-2.6.30.5/drivers/char/Makefile ---- linux-2.6.30.5.orig/drivers/char/Makefile 2009-08-16 23:19:38.000000000 +0200 -+++ linux-2.6.30.5/drivers/char/Makefile 2009-08-26 20:05:23.000000000 +0200 -@@ -90,6 +90,7 @@ - obj-$(CONFIG_PPDEV) += ppdev.o - obj-$(CONFIG_NWBUTTON) += nwbutton.o - obj-$(CONFIG_NWFLASH) += nwflash.o -+obj-$(CONFIG_AR7_GPIO) += ar7_gpio.o - obj-$(CONFIG_SCx200_GPIO) += scx200_gpio.o - obj-$(CONFIG_PC8736x_GPIO) += pc8736x_gpio.o - obj-$(CONFIG_NSC_GPIO) += nsc_gpio.o -diff -Nur linux-2.6.30.5.orig/drivers/char/watchdog/ar7_wdt.c linux-2.6.30.5/drivers/char/watchdog/ar7_wdt.c ---- linux-2.6.30.5.orig/drivers/char/watchdog/ar7_wdt.c 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.30.5/drivers/char/watchdog/ar7_wdt.c 2009-08-26 20:05:03.000000000 +0200 -@@ -0,0 +1,349 @@ -+/* -+ * drivers/watchdog/ar7_wdt.c -+ * -+ * Copyright (C) 2007 Nicolas Thill <nico@openwrt.org> -+ * Copyright (c) 2005 Enrik Berkhan <Enrik.Berkhan@akk.org> -+ * -+ * Some code taken from: -+ * National Semiconductor SCx200 Watchdog support -+ * Copyright (c) 2001,2002 Christer Weinigel <wingel@nano-system.com> -+ * -+ * This program is free software; you can redistribute it and/or modify -+ * it under the terms of the GNU General Public License as published by -+ * the Free Software Foundation; either version 2 of the License, or -+ * (at your option) any later version. -+ * -+ * This program is distributed in the hope that it will be useful, -+ * but WITHOUT ANY WARRANTY; without even the implied warranty of -+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -+ * GNU General Public License for more details. -+ * -+ * You should have received a copy of the GNU General Public License -+ * along with this program; if not, write to the Free Software -+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA -+ */ -+ -+#include <linux/module.h> -+#include <linux/moduleparam.h> -+#include <linux/errno.h> -+#include <linux/init.h> -+#include <linux/miscdevice.h> -+#include <linux/watchdog.h> -+#include <linux/notifier.h> -+#include <linux/reboot.h> -+#include <linux/fs.h> -+#include <linux/ioport.h> -+#include <linux/io.h> -+#include <linux/uaccess.h> -+ -+#include <asm/addrspace.h> -+#include <asm/ar7/ar7.h> -+ -+#define DRVNAME "ar7_wdt" -+#define LONGNAME "TI AR7 Watchdog Timer" -+ -+MODULE_AUTHOR("Nicolas Thill <nico@openwrt.org>"); -+MODULE_DESCRIPTION(LONGNAME); -+MODULE_LICENSE("GPL"); -+MODULE_ALIAS_MISCDEV(WATCHDOG_MINOR); -+ -+static int margin = 60; -+module_param(margin, int, 0); -+MODULE_PARM_DESC(margin, "Watchdog margin in seconds"); -+ -+static int nowayout = WATCHDOG_NOWAYOUT; -+module_param(nowayout, int, 0); -+MODULE_PARM_DESC(nowayout, "Disable watchdog shutdown on close"); -+ -+#define READ_REG(x) readl((void __iomem *)&(x)) -+#define WRITE_REG(x, v) writel((v), (void __iomem *)&(x)) -+ -+struct ar7_wdt { -+ u32 kick_lock; -+ u32 kick; -+ u32 change_lock; -+ u32 change; -+ u32 disable_lock; -+ u32 disable; -+ u32 prescale_lock; -+ u32 prescale; -+}; -+ -+static struct semaphore open_semaphore; -+static unsigned expect_close; -+ -+/* XXX currently fixed, allows max margin ~68.72 secs */ -+#define prescale_value 0xffff -+ -+/* Offset of the WDT registers */ -+static unsigned long ar7_regs_wdt; -+/* Pointer to the remapped WDT IO space */ -+static struct ar7_wdt *ar7_wdt; -+static void ar7_wdt_get_regs(void) -+{ -+ u16 chip_id = ar7_chip_id(); -+ switch (chip_id) { -+ case AR7_CHIP_7100: -+ case AR7_CHIP_7200: -+ ar7_regs_wdt = AR7_REGS_WDT; -+ break; -+ default: -+ ar7_regs_wdt = UR8_REGS_WDT; -+ break; -+ } -+} -+ -+ -+static void ar7_wdt_kick(u32 value) -+{ -+ WRITE_REG(ar7_wdt->kick_lock, 0x5555); -+ if ((READ_REG(ar7_wdt->kick_lock) & 3) == 1) { -+ WRITE_REG(ar7_wdt->kick_lock, 0xaaaa); -+ if ((READ_REG(ar7_wdt->kick_lock) & 3) == 3) { -+ WRITE_REG(ar7_wdt->kick, value); -+ return; -+ } -+ } -+ printk(KERN_ERR DRVNAME ": failed to unlock WDT kick reg\n"); -+} -+ -+static void ar7_wdt_prescale(u32 value) -+{ -+ WRITE_REG(ar7_wdt->prescale_lock, 0x5a5a); -+ if ((READ_REG(ar7_wdt->prescale_lock) & 3) == 1) { -+ WRITE_REG(ar7_wdt->prescale_lock, 0xa5a5); -+ if ((READ_REG(ar7_wdt->prescale_lock) & 3) == 3) { -+ WRITE_REG(ar7_wdt->prescale, value); -+ return; -+ } -+ } -+ printk(KERN_ERR DRVNAME ": failed to unlock WDT prescale reg\n"); -+} -+ -+static void ar7_wdt_change(u32 value) -+{ -+ WRITE_REG(ar7_wdt->change_lock, 0x6666); -+ if ((READ_REG(ar7_wdt->change_lock) & 3) == 1) { -+ WRITE_REG(ar7_wdt->change_lock, 0xbbbb); -+ if ((READ_REG(ar7_wdt->change_lock) & 3) == 3) { -+ WRITE_REG(ar7_wdt->change, value); -+ return; -+ } -+ } -+ printk(KERN_ERR DRVNAME ": failed to unlock WDT change reg\n"); -+} -+ -+static void ar7_wdt_disable(u32 value) -+{ -+ WRITE_REG(ar7_wdt->disable_lock, 0x7777); -+ if ((READ_REG(ar7_wdt->disable_lock) & 3) == 1) { -+ WRITE_REG(ar7_wdt->disable_lock, 0xcccc); -+ if ((READ_REG(ar7_wdt->disable_lock) & 3) == 2) { -+ WRITE_REG(ar7_wdt->disable_lock, 0xdddd); -+ if ((READ_REG(ar7_wdt->disable_lock) & 3) == 3) { -+ WRITE_REG(ar7_wdt->disable, value); -+ return; -+ } -+ } -+ } -+ printk(KERN_ERR DRVNAME ": failed to unlock WDT disable reg\n"); -+} -+ -+static void ar7_wdt_update_margin(int new_margin) -+{ -+ u32 change; -+ -+ change = new_margin * (ar7_vbus_freq() / prescale_value); -+ if (change < 1) change = 1; -+ if (change > 0xffff) change = 0xffff; -+ ar7_wdt_change(change); -+ margin = change * prescale_value / ar7_vbus_freq(); -+ printk(KERN_INFO DRVNAME -+ ": timer margin %d seconds (prescale %d, change %d, freq %d)\n", -+ margin, prescale_value, change, ar7_vbus_freq()); -+} -+ -+static void ar7_wdt_enable_wdt(void) -+{ -+ printk(KERN_DEBUG DRVNAME ": enabling watchdog timer\n"); -+ ar7_wdt_disable(1); -+ ar7_wdt_kick(1); -+} -+ -+static void ar7_wdt_disable_wdt(void) -+{ -+ printk(KERN_DEBUG DRVNAME ": disabling watchdog timer\n"); -+ ar7_wdt_disable(0); -+} -+ -+static int ar7_wdt_open(struct inode *inode, struct file *file) -+{ -+ /* only allow one at a time */ -+ if (down_trylock(&open_semaphore)) -+ return -EBUSY; -+ ar7_wdt_enable_wdt(); -+ expect_close = 0; -+ -+ return nonseekable_open(inode, file); -+} -+ -+static int ar7_wdt_release(struct inode *inode, struct file *file) -+{ -+ if (!expect_close) -+ printk(KERN_WARNING DRVNAME -+ ": watchdog device closed unexpectedly," -+ "will not disable the watchdog timer\n"); -+ else if (!nowayout) -+ ar7_wdt_disable_wdt(); -+ -+ up(&open_semaphore); -+ -+ return 0; -+} -+ -+static int ar7_wdt_notify_sys(struct notifier_block *this, -+ unsigned long code, void *unused) -+{ -+ if (code == SYS_HALT || code == SYS_POWER_OFF) -+ if (!nowayout) -+ ar7_wdt_disable_wdt(); -+ -+ return NOTIFY_DONE; -+} -+ -+static struct notifier_block ar7_wdt_notifier = { -+ .notifier_call = ar7_wdt_notify_sys -+}; -+ -+static ssize_t ar7_wdt_write(struct file *file, const char *data, -+ size_t len, loff_t *ppos) -+{ -+ /* check for a magic close character */ -+ if (len) { -+ size_t i; -+ -+ ar7_wdt_kick(1); -+ -+ expect_close = 0; -+ for (i = 0; i < len; ++i) { -+ char c; -+ if (get_user(c, data+i)) -+ return -EFAULT; -+ if (c == 'V') -+ expect_close = 1; -+ } -+ -+ } -+ return len; -+} -+ -+static int ar7_wdt_ioctl(struct inode *inode, struct file *file, -+ unsigned int cmd, unsigned long arg) -+{ -+ static struct watchdog_info ident = { -+ .identity = LONGNAME, -+ .firmware_version = 1, -+ .options = (WDIOF_SETTIMEOUT | WDIOF_MAGICCLOSE | WDIOF_KEEPALIVEPING), -+ }; -+ int new_margin; -+ -+ switch (cmd) { -+ default: -+ return -ENOTTY; -+ case WDIOC_GETSUPPORT: -+ if (copy_to_user((struct watchdog_info *)arg, &ident, -+ sizeof(ident))) -+ return -EFAULT; -+ return 0; -+ case WDIOC_GETSTATUS: -+ case WDIOC_GETBOOTSTATUS: -+ if (put_user(0, (int *)arg)) -+ return -EFAULT; -+ return 0; -+ case WDIOC_KEEPALIVE: -+ ar7_wdt_kick(1); -+ return 0; -+ case WDIOC_SETTIMEOUT: -+ if (get_user(new_margin, (int *)arg)) -+ return -EFAULT; -+ if (new_margin < 1) -+ return -EINVAL; -+ -+ ar7_wdt_update_margin(new_margin); -+ ar7_wdt_kick(1); -+ -+ case WDIOC_GETTIMEOUT: -+ if (put_user(margin, (int *)arg)) -+ return -EFAULT; -+ return 0; -+ } -+} -+ -+static struct file_operations ar7_wdt_fops = { -+ .owner = THIS_MODULE, -+ .write = ar7_wdt_write, -+ .ioctl = ar7_wdt_ioctl, -+ .open = ar7_wdt_open, -+ .release = ar7_wdt_release, -+}; -+ -+static struct miscdevice ar7_wdt_miscdev = { -+ .minor = WATCHDOG_MINOR, -+ .name = "watchdog", -+ .fops = &ar7_wdt_fops, -+}; -+ -+static int __init ar7_wdt_init(void) -+{ -+ int rc; -+ -+ ar7_wdt_get_regs(); -+ -+ if (!request_mem_region(ar7_regs_wdt, sizeof(struct ar7_wdt), -+ LONGNAME)) { -+ printk(KERN_WARNING DRVNAME ": watchdog I/O region busy\n"); -+ return -EBUSY; -+ } -+ -+ ar7_wdt = (struct ar7_wdt *) -+ ioremap(ar7_regs_wdt, sizeof(struct ar7_wdt)); -+ -+ ar7_wdt_disable_wdt(); -+ ar7_wdt_prescale(prescale_value); -+ ar7_wdt_update_margin(margin); -+ -+ sema_init(&open_semaphore, 1); -+ -+ rc = register_reboot_notifier(&ar7_wdt_notifier); -+ if (rc) { -+ printk(KERN_ERR DRVNAME -+ ": unable to register reboot notifier\n"); -+ goto out_alloc; -+ } -+ -+ rc = misc_register(&ar7_wdt_miscdev); -+ if (rc) { -+ printk(KERN_ERR DRVNAME ": unable to register misc device\n"); -+ goto out_register; -+ } -+ goto out; -+ -+out_register: -+ unregister_reboot_notifier(&ar7_wdt_notifier); -+out_alloc: -+ iounmap(ar7_wdt); -+ release_mem_region(ar7_regs_wdt, sizeof(struct ar7_wdt)); -+out: -+ return rc; -+} -+ -+static void __exit ar7_wdt_cleanup(void) -+{ -+ misc_deregister(&ar7_wdt_miscdev); -+ unregister_reboot_notifier(&ar7_wdt_notifier); -+ iounmap(ar7_wdt); -+ release_mem_region(ar7_regs_wdt, sizeof(struct ar7_wdt)); -+} -+ -+module_init(ar7_wdt_init); -+module_exit(ar7_wdt_cleanup); -diff -Nur linux-2.6.30.5.orig/drivers/Kconfig linux-2.6.30.5/drivers/Kconfig ---- linux-2.6.30.5.orig/drivers/Kconfig 2009-08-16 23:19:38.000000000 +0200 -+++ linux-2.6.30.5/drivers/Kconfig 2009-08-26 20:05:30.000000000 +0200 -@@ -104,6 +104,8 @@ - - source "drivers/uio/Kconfig" - -+source "drivers/vlynq/Kconfig" -+ - source "drivers/xen/Kconfig" - - source "drivers/staging/Kconfig" -diff -Nur linux-2.6.30.5.orig/drivers/Makefile linux-2.6.30.5/drivers/Makefile ---- linux-2.6.30.5.orig/drivers/Makefile 2009-08-16 23:19:38.000000000 +0200 -+++ linux-2.6.30.5/drivers/Makefile 2009-08-26 20:05:30.000000000 +0200 -@@ -103,6 +103,7 @@ - obj-$(CONFIG_HID) += hid/ - obj-$(CONFIG_PPC_PS3) += ps3/ - obj-$(CONFIG_OF) += of/ -+obj-$(CONFIG_VLYNQ) += vlynq/ - obj-$(CONFIG_SSB) += ssb/ - obj-$(CONFIG_VIRTIO) += virtio/ - obj-$(CONFIG_STAGING) += staging/ -diff -Nur linux-2.6.30.5.orig/drivers/mtd/maps/physmap.c linux-2.6.30.5/drivers/mtd/maps/physmap.c ---- linux-2.6.30.5.orig/drivers/mtd/maps/physmap.c 2009-08-16 23:19:38.000000000 +0200 -+++ linux-2.6.30.5/drivers/mtd/maps/physmap.c 2009-08-26 20:05:19.000000000 +0200 -@@ -80,7 +80,7 @@ - "map_rom", - NULL }; - #ifdef CONFIG_MTD_PARTITIONS --static const char *part_probe_types[] = { "cmdlinepart", "RedBoot", NULL }; -+static const char *part_probe_types[] = { "cmdlinepart", "RedBoot", "ar7part", NULL }; - #endif - - static int physmap_flash_probe(struct platform_device *dev) -diff -Nur linux-2.6.30.5.orig/drivers/net/cpmac.c linux-2.6.30.5/drivers/net/cpmac.c ---- linux-2.6.30.5.orig/drivers/net/cpmac.c 2009-08-16 23:19:38.000000000 +0200 -+++ linux-2.6.30.5/drivers/net/cpmac.c 2009-08-26 22:00:29.000000000 +0200 -@@ -615,13 +615,13 @@ - - dev_kfree_skb_irq(desc->skb); - desc->skb = NULL; -- if (netif_subqueue_stopped(dev, queue)) -+ if (__netif_subqueue_stopped(dev, queue)) - netif_wake_subqueue(dev, queue); - } else { - if (netif_msg_tx_err(priv) && net_ratelimit()) - printk(KERN_WARNING - "%s: end_xmit: spurious interrupt\n", dev->name); -- if (netif_subqueue_stopped(dev, queue)) -+ if (__netif_subqueue_stopped(dev, queue)) - netif_wake_subqueue(dev, queue); - } - } -@@ -731,7 +731,6 @@ - - static void cpmac_hw_error(struct work_struct *work) - { -- int i; - struct cpmac_priv *priv = - container_of(work, struct cpmac_priv, reset_work); - -@@ -818,7 +817,6 @@ - - static void cpmac_tx_timeout(struct net_device *dev) - { -- int i; - struct cpmac_priv *priv = netdev_priv(dev); - - spin_lock(&priv->lock); -@@ -1097,15 +1095,18 @@ - - static int __devinit cpmac_probe(struct platform_device *pdev) - { -- int rc, phy_id, i; -- char *mdio_bus_id = "0"; -+ int rc, phy_id; -+ char mdio_bus_id[BUS_ID_SIZE]; - struct resource *mem; - struct cpmac_priv *priv; - struct net_device *dev; - struct plat_cpmac_data *pdata; - - pdata = pdev->dev.platform_data; -+ strncpy(mdio_bus_id, "0", BUS_ID_SIZE); -+ phy_id = pdev->id; - -+ /* - for (phy_id = 0; phy_id < PHY_MAX_ADDR; phy_id++) { - if (!(pdata->phy_mask & (1 << phy_id))) - continue; -@@ -1116,15 +1117,17 @@ - - if (phy_id == PHY_MAX_ADDR) { - if (external_switch || dumb_switch) { -- mdio_bus_id = 0; /* fixed phys bus */ -+ strncpy(mdio_bus_id, "0", BUS_ID_SIZE); - phy_id = pdev->id; - } else { - dev_err(&pdev->dev, "no PHY present\n"); - return -ENODEV; - } - } -+ */ - - dev = alloc_etherdev_mq(sizeof(*priv), CPMAC_QUEUES); -+ //~ dev = alloc_etherdev(sizeof(*priv)); - - if (!dev) { - printk(KERN_ERR "cpmac: Unable to allocate net_device\n"); -@@ -1161,8 +1164,11 @@ - priv->msg_enable = netif_msg_init(debug_level, 0xff); - memcpy(dev->dev_addr, pdata->dev_addr, sizeof(dev->dev_addr)); - -- priv->phy = phy_connect(dev, dev_name(&cpmac_mii->phy_map[phy_id]->dev), -+ snprintf(priv->phy_name, BUS_ID_SIZE, PHY_ID_FMT, mdio_bus_id, phy_id); -+ //priv->phy = phy_connect(dev, dev_name(&cpmac_mii->phy_map[phy_id]->dev), -+ priv->phy = phy_connect(dev, priv->phy_name, - &cpmac_adjust_link, 0, PHY_INTERFACE_MODE_MII); -+ - if (IS_ERR(priv->phy)) { - if (netif_msg_drv(priv)) - printk(KERN_ERR "%s: Could not attach to PHY\n", -@@ -1249,7 +1255,7 @@ - } - - cpmac_mii->phy_mask = ~(mask | 0x80000000); -- snprintf(cpmac_mii->id, MII_BUS_ID_SIZE, "0"); -+ snprintf(cpmac_mii->id, MII_BUS_ID_SIZE, "1"); - - res = mdiobus_register(cpmac_mii); - if (res) -diff -Nur linux-2.6.30.5.orig/drivers/net/Kconfig linux-2.6.30.5/drivers/net/Kconfig ---- linux-2.6.30.5.orig/drivers/net/Kconfig 2009-08-16 23:19:38.000000000 +0200 -+++ linux-2.6.30.5/drivers/net/Kconfig 2009-08-26 20:06:44.000000000 +0200 -@@ -1760,7 +1760,7 @@ - - config CPMAC - tristate "TI AR7 CPMAC Ethernet support (EXPERIMENTAL)" -- depends on NET_ETHERNET && EXPERIMENTAL && AR7 && BROKEN -+ depends on NET_ETHERNET && EXPERIMENTAL && AR7 - select PHYLIB - help - TI AR7 CPMAC Ethernet support -diff -Nur linux-2.6.30.5.orig/drivers/serial/8250.c linux-2.6.30.5/drivers/serial/8250.c ---- linux-2.6.30.5.orig/drivers/serial/8250.c 2009-08-16 23:19:38.000000000 +0200 -+++ linux-2.6.30.5/drivers/serial/8250.c 2009-08-26 20:06:59.000000000 +0200 -@@ -287,6 +287,13 @@ - .fcr = UART_FCR_ENABLE_FIFO | UART_FCR_R_TRIG_10, - .flags = UART_CAP_FIFO, - }, -+ [PORT_AR7] = { -+ .name = "TI-AR7", -+ .fifo_size = 16, -+ .tx_loadsz = 16, -+ .fcr = UART_FCR_ENABLE_FIFO | UART_FCR_R_TRIG_00, -+ .flags = UART_CAP_FIFO | UART_CAP_AFE, -+ }, - }; - - #if defined (CONFIG_SERIAL_8250_AU1X00) -@@ -2702,7 +2709,11 @@ - { - struct uart_8250_port *up = (struct uart_8250_port *)port; - -+#ifdef CONFIG_AR7 -+ wait_for_xmitr(up, BOTH_EMPTY); -+#else - wait_for_xmitr(up, UART_LSR_THRE); -+#endif - serial_out(up, UART_TX, ch); - } - -diff -Nur linux-2.6.30.5.orig/drivers/vlynq/Kconfig linux-2.6.30.5/drivers/vlynq/Kconfig ---- linux-2.6.30.5.orig/drivers/vlynq/Kconfig 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.30.5/drivers/vlynq/Kconfig 2009-08-26 20:05:03.000000000 +0200 -@@ -0,0 +1,13 @@ -+menu "TI VLYNQ" -+ -+config VLYNQ -+ bool "TI VLYNQ bus support" -+ depends on AR7 && EXPERIMENTAL -+ help -+ Support for the TI VLYNQ bus -+ -+ The module will be called vlynq -+ -+ If unsure, say N -+ -+endmenu -diff -Nur linux-2.6.30.5.orig/drivers/vlynq/Makefile linux-2.6.30.5/drivers/vlynq/Makefile ---- linux-2.6.30.5.orig/drivers/vlynq/Makefile 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.30.5/drivers/vlynq/Makefile 2009-08-26 20:05:03.000000000 +0200 -@@ -0,0 +1,5 @@ -+# -+# Makefile for kernel vlynq drivers -+# -+ -+obj-$(CONFIG_VLYNQ) += vlynq.o -diff -Nur linux-2.6.30.5.orig/drivers/vlynq/vlynq.c linux-2.6.30.5/drivers/vlynq/vlynq.c ---- linux-2.6.30.5.orig/drivers/vlynq/vlynq.c 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.30.5/drivers/vlynq/vlynq.c 2009-08-26 20:06:33.000000000 +0200 -@@ -0,0 +1,813 @@ -+/* -+ * Copyright (C) 2006, 2007 Eugene Konev <ejka@openwrt.org> -+ * -+ * This program is free software; you can redistribute it and/or modify -+ * it under the terms of the GNU General Public License as published by -+ * the Free Software Foundation; either version 2 of the License, or -+ * (at your option) any later version. -+ * -+ * This program is distributed in the hope that it will be useful, -+ * but WITHOUT ANY WARRANTY; without even the implied warranty of -+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -+ * GNU General Public License for more details. -+ * -+ * You should have received a copy of the GNU General Public License -+ * along with this program; if not, write to the Free Software -+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA -+ * -+ * Parts of the VLYNQ specification can be found here: -+ * http://www.ti.com/litv/pdf/sprue36a -+ */ -+ -+#include <linux/init.h> -+#include <linux/types.h> -+#include <linux/kernel.h> -+#include <linux/string.h> -+#include <linux/device.h> -+#include <linux/module.h> -+#include <linux/errno.h> -+#include <linux/platform_device.h> -+#include <linux/interrupt.h> -+#include <linux/delay.h> -+#include <linux/io.h> -+ -+#include <linux/vlynq.h> -+ -+#define VLYNQ_CTRL_PM_ENABLE 0x80000000 -+#define VLYNQ_CTRL_CLOCK_INT 0x00008000 -+#define VLYNQ_CTRL_CLOCK_DIV(x) (((x) & 7) << 16) -+#define VLYNQ_CTRL_INT_LOCAL 0x00004000 -+#define VLYNQ_CTRL_INT_ENABLE 0x00002000 -+#define VLYNQ_CTRL_INT_VECTOR(x) (((x) & 0x1f) << 8) -+#define VLYNQ_CTRL_INT2CFG 0x00000080 -+#define VLYNQ_CTRL_RESET 0x00000001 -+ -+#define VLYNQ_CTRL_CLOCK_MASK (0x7 << 16) -+ -+#define VLYNQ_INT_OFFSET 0x00000014 -+#define VLYNQ_REMOTE_OFFSET 0x00000080 -+ -+#define VLYNQ_STATUS_LINK 0x00000001 -+#define VLYNQ_STATUS_LERROR 0x00000080 -+#define VLYNQ_STATUS_RERROR 0x00000100 -+ -+#define VINT_ENABLE 0x00000100 -+#define VINT_TYPE_EDGE 0x00000080 -+#define VINT_LEVEL_LOW 0x00000040 -+#define VINT_VECTOR(x) ((x) & 0x1f) -+#define VINT_OFFSET(irq) (8 * ((irq) % 4)) -+ -+#define VLYNQ_AUTONEGO_V2 0x00010000 -+ -+struct vlynq_regs { -+ u32 revision; -+ u32 control; -+ u32 status; -+ u32 int_prio; -+ u32 int_status; -+ u32 int_pending; -+ u32 int_ptr; -+ u32 tx_offset; -+ struct vlynq_mapping rx_mapping[4]; -+ u32 chip; -+ u32 autonego; -+ u32 unused[6]; -+ u32 int_device[8]; -+}; -+ -+#ifdef CONFIG_VLYNQ_DEBUG -+static void vlynq_dump_regs(struct vlynq_device *dev) -+{ -+ int i; -+ -+ printk(KERN_DEBUG "VLYNQ local=%p remote=%p\n", -+ dev->local, dev->remote); -+ for (i = 0; i < 32; i++) { -+ printk(KERN_DEBUG "VLYNQ: local %d: %08x\n", -+ i + 1, ((u32 *)dev->local)[i]); -+ printk(KERN_DEBUG "VLYNQ: remote %d: %08x\n", -+ i + 1, ((u32 *)dev->remote)[i]); -+ } -+} -+ -+static void vlynq_dump_mem(u32 *base, int count) -+{ -+ int i; -+ -+ for (i = 0; i < (count + 3) / 4; i++) { -+ if (i % 4 == 0) -+ printk(KERN_DEBUG "\nMEM[0x%04x]:", i * 4); -+ printk(KERN_DEBUG " 0x%08x", *(base + i)); -+ } -+ printk(KERN_DEBUG "\n"); -+} -+#endif -+ -+/* Check the VLYNQ link status with a given device */ -+static int vlynq_linked(struct vlynq_device *dev) -+{ -+ int i; -+ -+ for (i = 0; i < 100; i++) -+ if (readl(&dev->local->status) & VLYNQ_STATUS_LINK) -+ return 1; -+ else -+ cpu_relax(); -+ -+ return 0; -+} -+ -+static void vlynq_reset(struct vlynq_device *dev) -+{ -+ writel(readl(&dev->local->control) | VLYNQ_CTRL_RESET, -+ &dev->local->control); -+ -+ /* Wait for the devices to finish resetting */ -+ msleep(5); -+ -+ /* Remove reset bit */ -+ writel(readl(&dev->local->control) & ~VLYNQ_CTRL_RESET, -+ &dev->local->control); -+ -+ /* Give some time for the devices to settle */ -+ msleep(5); -+} -+ -+static void vlynq_irq_unmask(unsigned int irq) -+{ -+ u32 val; -+ struct vlynq_device *dev = get_irq_chip_data(irq); -+ int virq; -+ -+ BUG_ON(!dev); -+ virq = irq - dev->irq_start; -+ val = readl(&dev->remote->int_device[virq >> 2]); -+ val |= (VINT_ENABLE | virq) << VINT_OFFSET(virq); -+ writel(val, &dev->remote->int_device[virq >> 2]); -+} -+ -+static void vlynq_irq_mask(unsigned int irq) -+{ -+ u32 val; -+ struct vlynq_device *dev = get_irq_chip_data(irq); -+ int virq; -+ -+ BUG_ON(!dev); -+ virq = irq - dev->irq_start; -+ val = readl(&dev->remote->int_device[virq >> 2]); -+ val &= ~(VINT_ENABLE << VINT_OFFSET(virq)); -+ writel(val, &dev->remote->int_device[virq >> 2]); -+} -+ -+static int vlynq_irq_type(unsigned int irq, unsigned int flow_type) -+{ -+ u32 val; -+ struct vlynq_device *dev = get_irq_chip_data(irq); -+ int virq; -+ -+ BUG_ON(!dev); -+ virq = irq - dev->irq_start; -+ val = readl(&dev->remote->int_device[virq >> 2]); -+ switch (flow_type & IRQ_TYPE_SENSE_MASK) { -+ case IRQ_TYPE_EDGE_RISING: -+ case IRQ_TYPE_EDGE_FALLING: -+ case IRQ_TYPE_EDGE_BOTH: -+ val |= VINT_TYPE_EDGE << VINT_OFFSET(virq); -+ val &= ~(VINT_LEVEL_LOW << VINT_OFFSET(virq)); -+ break; -+ case IRQ_TYPE_LEVEL_HIGH: -+ val &= ~(VINT_TYPE_EDGE << VINT_OFFSET(virq)); -+ val &= ~(VINT_LEVEL_LOW << VINT_OFFSET(virq)); -+ break; -+ case IRQ_TYPE_LEVEL_LOW: -+ val &= ~(VINT_TYPE_EDGE << VINT_OFFSET(virq)); -+ val |= VINT_LEVEL_LOW << VINT_OFFSET(virq); -+ break; -+ default: -+ return -EINVAL; -+ } -+ writel(val, &dev->remote->int_device[virq >> 2]); -+ return 0; -+} -+ -+static void vlynq_local_ack(unsigned int irq) -+{ -+ struct vlynq_device *dev = get_irq_chip_data(irq); -+ -+ u32 status = readl(&dev->local->status); -+ -+ pr_debug("%s: local status: 0x%08x\n", -+ dev_name(&dev->dev), status); -+ writel(status, &dev->local->status); -+} -+ -+static void vlynq_remote_ack(unsigned int irq) -+{ -+ struct vlynq_device *dev = get_irq_chip_data(irq); -+ -+ u32 status = readl(&dev->remote->status); -+ -+ pr_debug("%s: remote status: 0x%08x\n", -+ dev_name(&dev->dev), status); -+ writel(status, &dev->remote->status); -+} -+ -+static irqreturn_t vlynq_irq(int irq, void *dev_id) -+{ -+ struct vlynq_device *dev = dev_id; -+ u32 status; -+ int virq = 0; -+ -+ status = readl(&dev->local->int_status); -+ writel(status, &dev->local->int_status); -+ -+ if (unlikely(!status)) -+ spurious_interrupt(); -+ -+ while (status) { -+ if (status & 1) -+ do_IRQ(dev->irq_start + virq); -+ status >>= 1; -+ virq++; -+ } -+ -+ return IRQ_HANDLED; -+} -+ -+static struct irq_chip vlynq_irq_chip = { -+ .name = "vlynq", -+ .unmask = vlynq_irq_unmask, -+ .mask = vlynq_irq_mask, -+ .set_type = vlynq_irq_type, -+}; -+ -+static struct irq_chip vlynq_local_chip = { -+ .name = "vlynq local error", -+ .unmask = vlynq_irq_unmask, -+ .mask = vlynq_irq_mask, -+ .ack = vlynq_local_ack, -+}; -+ -+static struct irq_chip vlynq_remote_chip = { -+ .name = "vlynq local error", -+ .unmask = vlynq_irq_unmask, -+ .mask = vlynq_irq_mask, -+ .ack = vlynq_remote_ack, -+}; -+ -+static int vlynq_setup_irq(struct vlynq_device *dev) -+{ -+ u32 val; -+ int i, virq; -+ -+ if (dev->local_irq == dev->remote_irq) { -+ printk(KERN_ERR -+ "%s: local vlynq irq should be different from remote\n", -+ dev_name(&dev->dev)); -+ return -EINVAL; -+ } -+ -+ /* Clear local and remote error bits */ -+ writel(readl(&dev->local->status), &dev->local->status); -+ writel(readl(&dev->remote->status), &dev->remote->status); -+ -+ /* Now setup interrupts */ -+ val = VLYNQ_CTRL_INT_VECTOR(dev->local_irq); -+ val |= VLYNQ_CTRL_INT_ENABLE | VLYNQ_CTRL_INT_LOCAL | -+ VLYNQ_CTRL_INT2CFG; -+ val |= readl(&dev->local->control); -+ writel(VLYNQ_INT_OFFSET, &dev->local->int_ptr); -+ writel(val, &dev->local->control); -+ -+ val = VLYNQ_CTRL_INT_VECTOR(dev->remote_irq); -+ val |= VLYNQ_CTRL_INT_ENABLE; -+ val |= readl(&dev->remote->control); -+ writel(VLYNQ_INT_OFFSET, &dev->remote->int_ptr); -+ writel(val, &dev->remote->int_ptr); -+ writel(val, &dev->remote->control); -+ -+ for (i = dev->irq_start; i <= dev->irq_end; i++) { -+ virq = i - dev->irq_start; -+ if (virq == dev->local_irq) { -+ set_irq_chip_and_handler(i, &vlynq_local_chip, -+ handle_level_irq); -+ set_irq_chip_data(i, dev); -+ } else if (virq == dev->remote_irq) { -+ set_irq_chip_and_handler(i, &vlynq_remote_chip, -+ handle_level_irq); -+ set_irq_chip_data(i, dev); -+ } else { -+ set_irq_chip_and_handler(i, &vlynq_irq_chip, -+ handle_simple_irq); -+ set_irq_chip_data(i, dev); -+ writel(0, &dev->remote->int_device[virq >> 2]); -+ } -+ } -+ -+ if (request_irq(dev->irq, vlynq_irq, IRQF_SHARED, "vlynq", dev)) { -+ printk(KERN_ERR "%s: request_irq failed\n", -+ dev_name(&dev->dev)); -+ return -EAGAIN; -+ } -+ -+ return 0; -+} -+ -+static void vlynq_device_release(struct device *dev) -+{ -+ struct vlynq_device *vdev = to_vlynq_device(dev); -+ kfree(vdev); -+} -+ -+static int vlynq_device_match(struct device *dev, -+ struct device_driver *drv) -+{ -+ struct vlynq_device *vdev = to_vlynq_device(dev); -+ struct vlynq_driver *vdrv = to_vlynq_driver(drv); -+ struct vlynq_device_id *ids = vdrv->id_table; -+ -+ while (ids->id) { -+ if (ids->id == vdev->dev_id) { -+ vdev->divisor = ids->divisor; -+ vlynq_set_drvdata(vdev, ids); -+ printk(KERN_INFO "Driver found for VLYNQ " -+ "device: %08x\n", vdev->dev_id); -+ return 1; -+ } -+ printk(KERN_DEBUG "Not using the %08x VLYNQ device's driver" -+ " for VLYNQ device: %08x\n", ids->id, vdev->dev_id); -+ ids++; -+ } -+ return 0; -+} -+ -+static int vlynq_device_probe(struct device *dev) -+{ -+ struct vlynq_device *vdev = to_vlynq_device(dev); -+ struct vlynq_driver *drv = to_vlynq_driver(dev->driver); -+ struct vlynq_device_id *id = vlynq_get_drvdata(vdev); -+ int result = -ENODEV; -+ -+ if (drv->probe) -+ result = drv->probe(vdev, id); -+ if (result) -+ put_device(dev); -+ return result; -+} -+ -+static int vlynq_device_remove(struct device *dev) -+{ -+ struct vlynq_driver *drv = to_vlynq_driver(dev->driver); -+ -+ if (drv->remove) -+ drv->remove(to_vlynq_device(dev)); -+ -+ return 0; -+} -+ -+int __vlynq_register_driver(struct vlynq_driver *driver, struct module *owner) -+{ -+ driver->driver.name = driver->name; -+ driver->driver.bus = &vlynq_bus_type; -+ return driver_register(&driver->driver); -+} -+EXPORT_SYMBOL(__vlynq_register_driver); -+ -+void vlynq_unregister_driver(struct vlynq_driver *driver) -+{ -+ driver_unregister(&driver->driver); -+} -+EXPORT_SYMBOL(vlynq_unregister_driver); -+ -+/* -+ * A VLYNQ remote device can clock the VLYNQ bus master -+ * using a dedicated clock line. In that case, both the -+ * remove device and the bus master should have the same -+ * serial clock dividers configured. Iterate through the -+ * 8 possible dividers until we actually link with the -+ * device. -+ */ -+static int __vlynq_try_remote(struct vlynq_device *dev) -+{ -+ int i; -+ -+ vlynq_reset(dev); -+ for (i = dev->dev_id ? vlynq_rdiv2 : vlynq_rdiv8; dev->dev_id ? -+ i <= vlynq_rdiv8 : i >= vlynq_rdiv2; -+ dev->dev_id ? i++ : i--) { -+ -+ if (!vlynq_linked(dev)) -+ break; -+ -+ writel((readl(&dev->remote->control) & -+ ~VLYNQ_CTRL_CLOCK_MASK) | -+ VLYNQ_CTRL_CLOCK_INT | -+ VLYNQ_CTRL_CLOCK_DIV(i - vlynq_rdiv1), -+ &dev->remote->control); -+ writel((readl(&dev->local->control) -+ & ~(VLYNQ_CTRL_CLOCK_INT | -+ VLYNQ_CTRL_CLOCK_MASK)) | -+ VLYNQ_CTRL_CLOCK_DIV(i - vlynq_rdiv1), -+ &dev->local->control); -+ -+ if (vlynq_linked(dev)) { -+ printk(KERN_DEBUG -+ "%s: using remote clock divisor %d\n", -+ dev_name(&dev->dev), i - vlynq_rdiv1 + 1); -+ dev->divisor = i; -+ return 0; -+ } else { -+ vlynq_reset(dev); -+ } -+ } -+ -+ return -ENODEV; -+} -+ -+/* -+ * A VLYNQ remote device can be clocked by the VLYNQ bus -+ * master using a dedicated clock line. In that case, only -+ * the bus master configures the serial clock divider. -+ * Iterate through the 8 possible dividers until we -+ * actually get a link with the device. -+ */ -+static int __vlynq_try_local(struct vlynq_device *dev) -+{ -+ int i; -+ -+ vlynq_reset(dev); -+ -+ for (i = dev->dev_id ? vlynq_ldiv2 : vlynq_ldiv8; dev->dev_id ? -+ i <= vlynq_ldiv8 : i >= vlynq_ldiv2; -+ dev->dev_id ? i++ : i--) { -+ -+ writel((readl(&dev->local->control) & -+ ~VLYNQ_CTRL_CLOCK_MASK) | -+ VLYNQ_CTRL_CLOCK_INT | -+ VLYNQ_CTRL_CLOCK_DIV(i - vlynq_ldiv1), -+ &dev->local->control); -+ -+ if (vlynq_linked(dev)) { -+ printk(KERN_DEBUG -+ "%s: using local clock divisor %d\n", -+ dev_name(&dev->dev), i - vlynq_ldiv1 + 1); -+ dev->divisor = i; -+ return 0; -+ } else { -+ vlynq_reset(dev); -+ } -+ } -+ -+ return -ENODEV; -+} -+ -+/* -+ * When using external clocking method, serial clock -+ * is supplied by an external oscillator, therefore we -+ * should mask the local clock bit in the clock control -+ * register for both the bus master and the remote device. -+ */ -+static int __vlynq_try_external(struct vlynq_device *dev) -+{ -+ vlynq_reset(dev); -+ if (!vlynq_linked(dev)) -+ return -ENODEV; -+ -+ writel((readl(&dev->remote->control) & -+ ~VLYNQ_CTRL_CLOCK_INT), -+ &dev->remote->control); -+ -+ writel((readl(&dev->local->control) & -+ ~VLYNQ_CTRL_CLOCK_INT), -+ &dev->local->control); -+ -+ if (vlynq_linked(dev)) { -+ printk(KERN_DEBUG "%s: using external clock\n", -+ dev_name(&dev->dev)); -+ dev->divisor = vlynq_div_external; -+ return 0; -+ } -+ -+ return -ENODEV; -+} -+ -+static int __vlynq_enable_device(struct vlynq_device *dev) -+{ -+ int result; -+ struct plat_vlynq_ops *ops = dev->dev.platform_data; -+ -+ result = ops->on(dev); -+ if (result) -+ return result; -+ -+ switch (dev->divisor) { -+ case vlynq_div_external: -+ case vlynq_div_auto: -+ /* When the device is brought from reset it should have clock -+ * generation negotiated by hardware. -+ * Check which device is generating clocks and perform setup -+ * accordingly */ -+ if (vlynq_linked(dev) && readl(&dev->remote->control) & -+ VLYNQ_CTRL_CLOCK_INT) { -+ if (!__vlynq_try_remote(dev) || -+ !__vlynq_try_local(dev) || -+ !__vlynq_try_external(dev)) -+ return 0; -+ } else { -+ if (!__vlynq_try_external(dev) || -+ !__vlynq_try_local(dev) || -+ !__vlynq_try_remote(dev)) -+ return 0; -+ } -+ break; -+ case vlynq_ldiv1: -+ case vlynq_ldiv2: -+ case vlynq_ldiv3: -+ case vlynq_ldiv4: -+ case vlynq_ldiv5: -+ case vlynq_ldiv6: -+ case vlynq_ldiv7: -+ case vlynq_ldiv8: -+ writel(VLYNQ_CTRL_CLOCK_INT | -+ VLYNQ_CTRL_CLOCK_DIV(dev->divisor - -+ vlynq_ldiv1), &dev->local->control); -+ writel(0, &dev->remote->control); -+ if (vlynq_linked(dev)) { -+ printk(KERN_DEBUG -+ "%s: using local clock divisor %d\n", -+ dev_name(&dev->dev), -+ dev->divisor - vlynq_ldiv1 + 1); -+ return 0; -+ } -+ break; -+ case vlynq_rdiv1: -+ case vlynq_rdiv2: -+ case vlynq_rdiv3: -+ case vlynq_rdiv4: -+ case vlynq_rdiv5: -+ case vlynq_rdiv6: -+ case vlynq_rdiv7: -+ case vlynq_rdiv8: -+ writel(0, &dev->local->control); -+ writel(VLYNQ_CTRL_CLOCK_INT | -+ VLYNQ_CTRL_CLOCK_DIV(dev->divisor - -+ vlynq_rdiv1), &dev->remote->control); -+ if (vlynq_linked(dev)) { -+ printk(KERN_DEBUG -+ "%s: using remote clock divisor %d\n", -+ dev_name(&dev->dev), -+ dev->divisor - vlynq_rdiv1 + 1); -+ return 0; -+ } -+ break; -+ } -+ -+ ops->off(dev); -+ return -ENODEV; -+} -+ -+int vlynq_enable_device(struct vlynq_device *dev) -+{ -+ struct plat_vlynq_ops *ops = dev->dev.platform_data; -+ int result = -ENODEV; -+ -+ result = __vlynq_enable_device(dev); -+ if (result) -+ return result; -+ -+ result = vlynq_setup_irq(dev); -+ if (result) -+ ops->off(dev); -+ -+ dev->enabled = !result; -+ return result; -+} -+EXPORT_SYMBOL(vlynq_enable_device); -+ -+ -+void vlynq_disable_device(struct vlynq_device *dev) -+{ -+ struct plat_vlynq_ops *ops = dev->dev.platform_data; -+ -+ dev->enabled = 0; -+ free_irq(dev->irq, dev); -+ ops->off(dev); -+} -+EXPORT_SYMBOL(vlynq_disable_device); -+ -+int vlynq_set_local_mapping(struct vlynq_device *dev, u32 tx_offset, -+ struct vlynq_mapping *mapping) -+{ -+ int i; -+ -+ if (!dev->enabled) -+ return -ENXIO; -+ -+ writel(tx_offset, &dev->local->tx_offset); -+ for (i = 0; i < 4; i++) { -+ writel(mapping[i].offset, &dev->local->rx_mapping[i].offset); -+ writel(mapping[i].size, &dev->local->rx_mapping[i].size); -+ } -+ return 0; -+} -+EXPORT_SYMBOL(vlynq_set_local_mapping); -+ -+int vlynq_set_remote_mapping(struct vlynq_device *dev, u32 tx_offset, -+ struct vlynq_mapping *mapping) -+{ -+ int i; -+ -+ if (!dev->enabled) -+ return -ENXIO; -+ -+ writel(tx_offset, &dev->remote->tx_offset); -+ for (i = 0; i < 4; i++) { -+ writel(mapping[i].offset, &dev->remote->rx_mapping[i].offset); -+ writel(mapping[i].size, &dev->remote->rx_mapping[i].size); -+ } -+ return 0; -+} -+EXPORT_SYMBOL(vlynq_set_remote_mapping); -+ -+int vlynq_set_local_irq(struct vlynq_device *dev, int virq) -+{ -+ int irq = dev->irq_start + virq; -+ if (dev->enabled) -+ return -EBUSY; -+ -+ if ((irq < dev->irq_start) || (irq > dev->irq_end)) -+ return -EINVAL; -+ -+ if (virq == dev->remote_irq) -+ return -EINVAL; -+ -+ dev->local_irq = virq; -+ -+ return 0; -+} -+EXPORT_SYMBOL(vlynq_set_local_irq); -+ -+int vlynq_set_remote_irq(struct vlynq_device *dev, int virq) -+{ -+ int irq = dev->irq_start + virq; -+ if (dev->enabled) -+ return -EBUSY; -+ -+ if ((irq < dev->irq_start) || (irq > dev->irq_end)) -+ return -EINVAL; -+ -+ if (virq == dev->local_irq) -+ return -EINVAL; -+ -+ dev->remote_irq = virq; -+ -+ return 0; -+} -+EXPORT_SYMBOL(vlynq_set_remote_irq); -+ -+static int vlynq_probe(struct platform_device *pdev) -+{ -+ struct vlynq_device *dev; -+ struct resource *regs_res, *mem_res, *irq_res; -+ int len, result; -+ -+ regs_res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "regs"); -+ if (!regs_res) -+ return -ENODEV; -+ -+ mem_res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "mem"); -+ if (!mem_res) -+ return -ENODEV; -+ -+ irq_res = platform_get_resource_byname(pdev, IORESOURCE_IRQ, "devirq"); -+ if (!irq_res) -+ return -ENODEV; -+ -+ dev = kzalloc(sizeof(*dev), GFP_KERNEL); -+ if (!dev) { -+ printk(KERN_ERR -+ "vlynq: failed to allocate device structure\n"); -+ return -ENOMEM; -+ } -+ -+ dev->id = pdev->id; -+ dev->dev.bus = &vlynq_bus_type; -+ dev->dev.parent = &pdev->dev; -+ dev_set_name(&dev->dev, "vlynq%d", dev->id); -+ dev->dev.platform_data = pdev->dev.platform_data; -+ dev->dev.release = vlynq_device_release; -+ -+ dev->regs_start = regs_res->start; -+ dev->regs_end = regs_res->end; -+ dev->mem_start = mem_res->start; -+ dev->mem_end = mem_res->end; -+ -+ len = regs_res->end - regs_res->start; -+ if (!request_mem_region(regs_res->start, len, dev_name(&dev->dev))) { -+ printk(KERN_ERR "%s: Can't request vlynq registers\n", -+ dev_name(&dev->dev)); -+ result = -ENXIO; -+ goto fail_request; -+ } -+ -+ dev->local = ioremap(regs_res->start, len); -+ if (!dev->local) { -+ printk(KERN_ERR "%s: Can't remap vlynq registers\n", -+ dev_name(&dev->dev)); -+ result = -ENXIO; -+ goto fail_remap; -+ } -+ -+ dev->remote = (struct vlynq_regs *)((void *)dev->local + -+ VLYNQ_REMOTE_OFFSET); -+ -+ dev->irq = platform_get_irq_byname(pdev, "irq"); -+ dev->irq_start = irq_res->start; -+ dev->irq_end = irq_res->end; -+ dev->local_irq = dev->irq_end - dev->irq_start; -+ dev->remote_irq = dev->local_irq - 1; -+ -+ if (device_register(&dev->dev)) -+ goto fail_register; -+ platform_set_drvdata(pdev, dev); -+ -+ printk(KERN_INFO "%s: regs 0x%p, irq %d, mem 0x%p\n", -+ dev_name(&dev->dev), (void *)dev->regs_start, dev->irq, -+ (void *)dev->mem_start); -+ -+ dev->dev_id = 0; -+ dev->divisor = vlynq_div_auto; -+ result = __vlynq_enable_device(dev); -+ if (result == 0) { -+ dev->dev_id = readl(&dev->remote->chip); -+ ((struct plat_vlynq_ops *)(dev->dev.platform_data))->off(dev); -+ } -+ if (dev->dev_id) -+ printk(KERN_INFO "Found a VLYNQ device: %08x\n", dev->dev_id); -+ -+ return 0; -+ -+fail_register: -+ iounmap(dev->local); -+fail_remap: -+fail_request: -+ release_mem_region(regs_res->start, len); -+ kfree(dev); -+ return result; -+} -+ -+static int vlynq_remove(struct platform_device *pdev) -+{ -+ struct vlynq_device *dev = platform_get_drvdata(pdev); -+ -+ device_unregister(&dev->dev); -+ iounmap(dev->local); -+ release_mem_region(dev->regs_start, dev->regs_end - dev->regs_start); -+ -+ kfree(dev); -+ -+ return 0; -+} -+ -+static struct platform_driver vlynq_platform_driver = { -+ .driver.name = "vlynq", -+ .probe = vlynq_probe, -+ .remove = __devexit_p(vlynq_remove), -+}; -+ -+struct bus_type vlynq_bus_type = { -+ .name = "vlynq", -+ .match = vlynq_device_match, -+ .probe = vlynq_device_probe, -+ .remove = vlynq_device_remove, -+}; -+EXPORT_SYMBOL(vlynq_bus_type); -+ -+static int __devinit vlynq_init(void) -+{ -+ int res = 0; -+ -+ res = bus_register(&vlynq_bus_type); -+ if (res) -+ goto fail_bus; -+ -+ res = platform_driver_register(&vlynq_platform_driver); -+ if (res) -+ goto fail_platform; -+ -+ return 0; -+ -+fail_platform: -+ bus_unregister(&vlynq_bus_type); -+fail_bus: -+ return res; -+} -+ -+static void __devexit vlynq_exit(void) -+{ -+ platform_driver_unregister(&vlynq_platform_driver); -+ bus_unregister(&vlynq_bus_type); -+} -+ -+module_init(vlynq_init); -+module_exit(vlynq_exit); -diff -Nur linux-2.6.30.5.orig/drivers/watchdog/ar7_wdt.c linux-2.6.30.5/drivers/watchdog/ar7_wdt.c ---- linux-2.6.30.5.orig/drivers/watchdog/ar7_wdt.c 2009-08-16 23:19:38.000000000 +0200 -+++ linux-2.6.30.5/drivers/watchdog/ar7_wdt.c 2009-08-26 20:06:40.000000000 +0200 -@@ -298,14 +298,28 @@ - .fops = &ar7_wdt_fops, - }; - -+#define AR7_WDT_HARDWARE_ENABLE 0x10 -+ - static int __init ar7_wdt_init(void) - { - int rc; -+ u32 *bootcr; -+ u32 bootcr_value; - - spin_lock_init(&wdt_lock); - - ar7_wdt_get_regs(); - -+ /* arch/mips/ar7/clocks.c is the only other thing that reads this */ -+ bootcr = (u32 *)ioremap_nocache(AR7_REGS_DCL, 4); -+ bootcr_value = *bootcr; -+ iounmap(bootcr); -+ -+ if (!(bootcr_value & AR7_WDT_HARDWARE_ENABLE)) { -+ printk(KERN_INFO DRVNAME ": watchdog disabled in hardware (bootcr=%#x)\n", bootcr_value); -+ return -ENODEV; -+ } -+ - if (!request_mem_region(ar7_regs_wdt, sizeof(struct ar7_wdt), - LONGNAME)) { - printk(KERN_WARNING DRVNAME ": watchdog I/O region busy\n"); -diff -Nur linux-2.6.30.5.orig/include/asm-mips/ar7/ar7.h linux-2.6.30.5/include/asm-mips/ar7/ar7.h ---- linux-2.6.30.5.orig/include/asm-mips/ar7/ar7.h 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.30.5/include/asm-mips/ar7/ar7.h 2009-08-26 20:05:02.000000000 +0200 -@@ -0,0 +1,170 @@ -+/* -+ * Copyright (C) 2006,2007 Felix Fietkau <nbd@openwrt.org> -+ * Copyright (C) 2006,2007 Eugene Konev <ejka@openwrt.org> -+ * -+ * This program is free software; you can redistribute it and/or modify -+ * it under the terms of the GNU General Public License as published by -+ * the Free Software Foundation; either version 2 of the License, or -+ * (at your option) any later version. -+ * -+ * This program is distributed in the hope that it will be useful, -+ * but WITHOUT ANY WARRANTY; without even the implied warranty of -+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -+ * GNU General Public License for more details. -+ * -+ * You should have received a copy of the GNU General Public License -+ * along with this program; if not, write to the Free Software -+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA -+ */ -+ -+#ifndef __AR7_H__ -+#define __AR7_H__ -+ -+#include <linux/delay.h> -+#include <asm/addrspace.h> -+#include <linux/io.h> -+ -+#define AR7_REGS_BASE 0x08610000 -+ -+#define AR7_REGS_MAC0 (AR7_REGS_BASE + 0x0000) -+#define AR7_REGS_GPIO (AR7_REGS_BASE + 0x0900) -+/* 0x08610A00 - 0x08610BFF (512 bytes, 128 bytes / clock) */ -+#define AR7_REGS_POWER (AR7_REGS_BASE + 0x0a00) -+#define AR7_REGS_UART0 (AR7_REGS_BASE + 0x0e00) -+#define AR7_REGS_USB (AR7_REGS_BASE + 0x1200) -+#define AR7_REGS_RESET (AR7_REGS_BASE + 0x1600) -+#define AR7_REGS_VLYNQ0 (AR7_REGS_BASE + 0x1800) -+#define AR7_REGS_DCL (AR7_REGS_BASE + 0x1a00) -+#define AR7_REGS_VLYNQ1 (AR7_REGS_BASE + 0x1c00) -+#define AR7_REGS_MDIO (AR7_REGS_BASE + 0x1e00) -+#define AR7_REGS_IRQ (AR7_REGS_BASE + 0x2400) -+#define AR7_REGS_MAC1 (AR7_REGS_BASE + 0x2800) -+ -+#define AR7_REGS_WDT (AR7_REGS_BASE + 0x1f00) -+#define UR8_REGS_WDT (AR7_REGS_BASE + 0x0b00) -+#define UR8_REGS_UART1 (AR7_REGS_BASE + 0x0f00) -+ -+#define AR7_RESET_PEREPHERIAL 0x0 -+#define AR7_RESET_SOFTWARE 0x4 -+#define AR7_RESET_STATUS 0x8 -+ -+#define AR7_RESET_BIT_CPMAC_LO 17 -+#define AR7_RESET_BIT_CPMAC_HI 21 -+#define AR7_RESET_BIT_MDIO 22 -+#define AR7_RESET_BIT_EPHY 26 -+ -+/* GPIO control registers */ -+#define AR7_GPIO_INPUT 0x0 -+#define AR7_GPIO_OUTPUT 0x4 -+#define AR7_GPIO_DIR 0x8 -+#define AR7_GPIO_ENABLE 0xc -+ -+#define AR7_CHIP_7100 0x18 -+#define AR7_CHIP_7200 0x2b -+#define AR7_CHIP_7300 0x05 -+ -+/* Interrupts */ -+#define AR7_IRQ_UART0 15 -+#define AR7_IRQ_UART1 16 -+ -+/* Clocks */ -+#define AR7_AFE_CLOCK 35328000 -+#define AR7_REF_CLOCK 25000000 -+#define AR7_XTAL_CLOCK 24000000 -+ -+struct plat_cpmac_data { -+ int reset_bit; -+ int power_bit; -+ u32 phy_mask; -+ char dev_addr[6]; -+}; -+ -+struct plat_dsl_data { -+ int reset_bit_dsl; -+ int reset_bit_sar; -+}; -+ -+extern int ar7_cpu_clock, ar7_bus_clock, ar7_dsp_clock; -+ -+static inline u16 ar7_chip_id(void) -+{ -+ return readl((void *)KSEG1ADDR(AR7_REGS_GPIO + 0x14)) & 0xffff; -+} -+ -+static inline u8 ar7_chip_rev(void) -+{ -+ return (readl((void *)KSEG1ADDR(AR7_REGS_GPIO + 0x14)) >> 16) & 0xff; -+} -+ -+static inline int ar7_cpu_freq(void) -+{ -+ return ar7_cpu_clock; -+} -+ -+static inline int ar7_bus_freq(void) -+{ -+ return ar7_bus_clock; -+} -+ -+static inline int ar7_vbus_freq(void) -+{ -+ return ar7_bus_clock / 2; -+} -+#define ar7_cpmac_freq ar7_vbus_freq -+ -+static inline int ar7_dsp_freq(void) -+{ -+ return ar7_dsp_clock; -+} -+ -+static inline int ar7_has_high_cpmac(void) -+{ -+ u16 chip_id = ar7_chip_id(); -+ switch (chip_id) { -+ case AR7_CHIP_7100: -+ case AR7_CHIP_7200: -+ return 0; -+ default: -+ return 1; -+ } -+} -+#define ar7_has_high_vlynq ar7_has_high_cpmac -+#define ar7_has_second_uart ar7_has_high_cpmac -+ -+static inline void ar7_device_enable(u32 bit) -+{ -+ void *reset_reg = -+ (void *)KSEG1ADDR(AR7_REGS_RESET + AR7_RESET_PEREPHERIAL); -+ writel(readl(reset_reg) | (1 << bit), reset_reg); -+ mdelay(20); -+} -+ -+static inline void ar7_device_disable(u32 bit) -+{ -+ void *reset_reg = -+ (void *)KSEG1ADDR(AR7_REGS_RESET + AR7_RESET_PEREPHERIAL); -+ writel(readl(reset_reg) & ~(1 << bit), reset_reg); -+ mdelay(20); -+} -+ -+static inline void ar7_device_reset(u32 bit) -+{ -+ ar7_device_disable(bit); -+ ar7_device_enable(bit); -+} -+ -+static inline void ar7_device_on(u32 bit) -+{ -+ void *power_reg = (void *)KSEG1ADDR(AR7_REGS_POWER); -+ writel(readl(power_reg) | (1 << bit), power_reg); -+ mdelay(20); -+} -+ -+static inline void ar7_device_off(u32 bit) -+{ -+ void *power_reg = (void *)KSEG1ADDR(AR7_REGS_POWER); -+ writel(readl(power_reg) & ~(1 << bit), power_reg); -+ mdelay(20); -+} -+ -+#endif /* __AR7_H__ */ -diff -Nur linux-2.6.30.5.orig/include/asm-mips/ar7/gpio.h linux-2.6.30.5/include/asm-mips/ar7/gpio.h ---- linux-2.6.30.5.orig/include/asm-mips/ar7/gpio.h 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.30.5/include/asm-mips/ar7/gpio.h 2009-08-26 20:05:02.000000000 +0200 -@@ -0,0 +1,109 @@ -+/* -+ * Copyright (C) 2007 Florian Fainelli <florian@openwrt.org> -+ * -+ * This program is free software; you can redistribute it and/or modify -+ * it under the terms of the GNU General Public License as published by -+ * the Free Software Foundation; either version 2 of the License, or -+ * (at your option) any later version. -+ * -+ * This program is distributed in the hope that it will be useful, -+ * but WITHOUT ANY WARRANTY; without even the implied warranty of -+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -+ * GNU General Public License for more details. -+ * -+ * You should have received a copy of the GNU General Public License -+ * along with this program; if not, write to the Free Software -+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA -+ */ -+ -+#ifndef __AR7_GPIO_H__ -+#define __AR7_GPIO_H__ -+#include <asm/ar7/ar7.h> -+ -+#define AR7_GPIO_MAX 32 -+ -+extern int gpio_request(unsigned gpio, const char *label); -+extern void gpio_free(unsigned gpio); -+ -+/* Common GPIO layer */ -+static inline int gpio_get_value(unsigned gpio) -+{ -+ void __iomem *gpio_in = -+ (void __iomem *)KSEG1ADDR(AR7_REGS_GPIO + AR7_GPIO_INPUT); -+ -+ return readl(gpio_in) & (1 << gpio); -+} -+ -+static inline void gpio_set_value(unsigned gpio, int value) -+{ -+ void __iomem *gpio_out = -+ (void __iomem *)KSEG1ADDR(AR7_REGS_GPIO + AR7_GPIO_OUTPUT); -+ unsigned tmp; -+ -+ tmp = readl(gpio_out) & ~(1 << gpio); -+ if (value) -+ tmp |= 1 << gpio; -+ writel(tmp, gpio_out); -+} -+ -+static inline int gpio_direction_input(unsigned gpio) -+{ -+ void __iomem *gpio_dir = -+ (void __iomem *)KSEG1ADDR(AR7_REGS_GPIO + AR7_GPIO_DIR); -+ -+ if (gpio >= AR7_GPIO_MAX) -+ return -EINVAL; -+ -+ writel(readl(gpio_dir) | (1 << gpio), gpio_dir); -+ -+ return 0; -+} -+ -+static inline int gpio_direction_output(unsigned gpio, int value) -+{ -+ void __iomem *gpio_dir = -+ (void __iomem *)KSEG1ADDR(AR7_REGS_GPIO + AR7_GPIO_DIR); -+ -+ if (gpio >= AR7_GPIO_MAX) -+ return -EINVAL; -+ -+ gpio_set_value(gpio, value); -+ writel(readl(gpio_dir) & ~(1 << gpio), gpio_dir); -+ -+ return 0; -+} -+ -+static inline int gpio_to_irq(unsigned gpio) -+{ -+ return -EINVAL; -+} -+ -+static inline int irq_to_gpio(unsigned irq) -+{ -+ return -EINVAL; -+} -+ -+/* Board specific GPIO functions */ -+static inline int ar7_gpio_enable(unsigned gpio) -+{ -+ void __iomem *gpio_en = -+ (void __iomem *)KSEG1ADDR(AR7_REGS_GPIO + AR7_GPIO_ENABLE); -+ -+ writel(readl(gpio_en) | (1 << gpio), gpio_en); -+ -+ return 0; -+} -+ -+static inline int ar7_gpio_disable(unsigned gpio) -+{ -+ void __iomem *gpio_en = -+ (void __iomem *)KSEG1ADDR(AR7_REGS_GPIO + AR7_GPIO_ENABLE); -+ -+ writel(readl(gpio_en) & ~(1 << gpio), gpio_en); -+ -+ return 0; -+} -+ -+#include <asm-generic/gpio.h> -+ -+#endif -diff -Nur linux-2.6.30.5.orig/include/asm-mips/ar7/irq.h linux-2.6.30.5/include/asm-mips/ar7/irq.h ---- linux-2.6.30.5.orig/include/asm-mips/ar7/irq.h 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.30.5/include/asm-mips/ar7/irq.h 2009-08-26 20:05:02.000000000 +0200 -@@ -0,0 +1,16 @@ -+/* -+ * This file is subject to the terms and conditions of the GNU General Public -+ * License. See the file "COPYING" in the main directory of this archive -+ * for more details. -+ * -+ * Shamelessly copied from asm-mips/mach-emma2rh/ -+ * Copyright (C) 2003 by Ralf Baechle -+ */ -+#ifndef __ASM_AR7_IRQ_H -+#define __ASM_AR7_IRQ_H -+ -+#define NR_IRQS 256 -+ -+#include_next <irq.h> -+ -+#endif /* __ASM_AR7_IRQ_H */ -diff -Nur linux-2.6.30.5.orig/include/asm-mips/ar7/prom.h linux-2.6.30.5/include/asm-mips/ar7/prom.h ---- linux-2.6.30.5.orig/include/asm-mips/ar7/prom.h 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.30.5/include/asm-mips/ar7/prom.h 2009-08-26 20:05:02.000000000 +0200 -@@ -0,0 +1,26 @@ -+/* -+ * Copyright (C) 2006, 2007 Florian Fainelli <florian@openwrt.org> -+ * -+ * This program is free software; you can redistribute it and/or modify -+ * it under the terms of the GNU General Public License as published by -+ * the Free Software Foundation; either version 2 of the License, or -+ * (at your option) any later version. -+ * -+ * This program is distributed in the hope that it will be useful, -+ * but WITHOUT ANY WARRANTY; without even the implied warranty of -+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -+ * GNU General Public License for more details. -+ * -+ * You should have received a copy of the GNU General Public License -+ * along with this program; if not, write to the Free Software -+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA -+ */ -+ -+#ifndef __PROM_H__ -+#define __PROM_H__ -+ -+extern char *prom_getenv(const char *name); -+extern void prom_printf(const char *fmt, ...) __attribute__((format(printf, 1, 2))); -+extern void prom_meminit(void); -+ -+#endif /* __PROM_H__ */ -diff -Nur linux-2.6.30.5.orig/include/asm-mips/ar7/spaces.h linux-2.6.30.5/include/asm-mips/ar7/spaces.h ---- linux-2.6.30.5.orig/include/asm-mips/ar7/spaces.h 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.30.5/include/asm-mips/ar7/spaces.h 2009-08-26 20:05:02.000000000 +0200 -@@ -0,0 +1,32 @@ -+/* -+ * This file is subject to the terms and conditions of the GNU General Public -+ * License. See the file "COPYING" in the main directory of this archive -+ * for more details. -+ * -+ * Copyright (C) 1994 - 1999, 2000, 03, 04 Ralf Baechle -+ * Copyright (C) 2000, 2002 Maciej W. Rozycki -+ * Copyright (C) 1990, 1999, 2000 Silicon Graphics, Inc. -+ */ -+#ifndef _ASM_AR7_SPACES_H -+#define _ASM_AR7_SPACES_H -+ -+#define CAC_BASE 0x80000000 -+#define IO_BASE 0xa0000000 -+#define UNCAC_BASE 0xa0000000 -+#define MAP_BASE 0xc0000000 -+ -+/* -+ * This handles the memory map. -+ * We handle pages at KSEG0 for kernels with 32 bit address space. -+ */ -+#define PAGE_OFFSET 0x94000000UL -+#define PHYS_OFFSET 0x14000000UL -+ -+/* -+ * Memory above this physical address will be considered highmem. -+ */ -+#ifndef HIGHMEM_START -+#define HIGHMEM_START 0x40000000UL -+#endif -+ -+#endif /* __ASM_AR7_SPACES_H */ -diff -Nur linux-2.6.30.5.orig/include/asm-mips/ar7/war.h linux-2.6.30.5/include/asm-mips/ar7/war.h ---- linux-2.6.30.5.orig/include/asm-mips/ar7/war.h 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.30.5/include/asm-mips/ar7/war.h 2009-08-26 20:05:02.000000000 +0200 -@@ -0,0 +1,25 @@ -+/* -+ * This file is subject to the terms and conditions of the GNU General Public -+ * License. See the file "COPYING" in the main directory of this archive -+ * for more details. -+ * -+ * Copyright (C) 2002, 2004, 2007 by Ralf Baechle <ralf@linux-mips.org> -+ */ -+#ifndef __ASM_MIPS_MACH_BCM947XX_WAR_H -+#define __ASM_MIPS_MACH_BCM947XX_WAR_H -+ -+#define R4600_V1_INDEX_ICACHEOP_WAR 0 -+#define R4600_V1_HIT_CACHEOP_WAR 0 -+#define R4600_V2_HIT_CACHEOP_WAR 0 -+#define R5432_CP0_INTERRUPT_WAR 0 -+#define BCM1250_M3_WAR 0 -+#define SIBYTE_1956_WAR 0 -+#define MIPS4K_ICACHE_REFILL_WAR 0 -+#define MIPS_CACHE_SYNC_WAR 0 -+#define TX49XX_ICACHE_INDEX_INV_WAR 0 -+#define RM9000_CDEX_SMP_WAR 0 -+#define ICACHE_REFILLS_WORKAROUND_WAR 0 -+#define R10000_LLSC_WAR 0 -+#define MIPS34K_MISSED_ITLB_WAR 0 -+ -+#endif /* __ASM_MIPS_MACH_BCM947XX_WAR_H */ -diff -Nur linux-2.6.30.5.orig/include/linux/serial_core.h linux-2.6.30.5/include/linux/serial_core.h ---- linux-2.6.30.5.orig/include/linux/serial_core.h 2009-08-16 23:19:38.000000000 +0200 -+++ linux-2.6.30.5/include/linux/serial_core.h 2009-08-26 20:06:59.000000000 +0200 -@@ -41,6 +41,7 @@ - #define PORT_XSCALE 15 - #define PORT_RM9000 16 /* PMC-Sierra RM9xxx internal UART */ - #define PORT_OCTEON 17 /* Cavium OCTEON internal UART */ -+#define PORT_AR7 18 /* TI AR7 internal UART */ - #define PORT_MAX_8250 17 /* max port ID */ - - /* -diff -Nur linux-2.6.30.5.orig/include/linux/vlynq.h linux-2.6.30.5/include/linux/vlynq.h ---- linux-2.6.30.5.orig/include/linux/vlynq.h 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.30.5/include/linux/vlynq.h 2009-08-26 20:05:02.000000000 +0200 -@@ -0,0 +1,161 @@ -+/* -+ * Copyright (C) 2006, 2007 Eugene Konev <ejka@openwrt.org> -+ * -+ * This program is free software; you can redistribute it and/or modify -+ * it under the terms of the GNU General Public License as published by -+ * the Free Software Foundation; either version 2 of the License, or -+ * (at your option) any later version. -+ * -+ * This program is distributed in the hope that it will be useful, -+ * but WITHOUT ANY WARRANTY; without even the implied warranty of -+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -+ * GNU General Public License for more details. -+ * -+ * You should have received a copy of the GNU General Public License -+ * along with this program; if not, write to the Free Software -+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA -+ */ -+ -+#ifndef __VLYNQ_H__ -+#define __VLYNQ_H__ -+ -+#include <linux/device.h> -+#include <linux/module.h> -+#include <linux/types.h> -+ -+#define VLYNQ_NUM_IRQS 32 -+ -+struct vlynq_mapping { -+ u32 size; -+ u32 offset; -+}; -+ -+enum vlynq_divisor { -+ vlynq_div_auto = 0, -+ vlynq_ldiv1, -+ vlynq_ldiv2, -+ vlynq_ldiv3, -+ vlynq_ldiv4, -+ vlynq_ldiv5, -+ vlynq_ldiv6, -+ vlynq_ldiv7, -+ vlynq_ldiv8, -+ vlynq_rdiv1, -+ vlynq_rdiv2, -+ vlynq_rdiv3, -+ vlynq_rdiv4, -+ vlynq_rdiv5, -+ vlynq_rdiv6, -+ vlynq_rdiv7, -+ vlynq_rdiv8, -+ vlynq_div_external -+}; -+ -+struct vlynq_device_id { -+ u32 id; -+ enum vlynq_divisor divisor; -+ unsigned long driver_data; -+}; -+ -+struct vlynq_regs; -+struct vlynq_device { -+ u32 id, dev_id; -+ int local_irq; -+ int remote_irq; -+ enum vlynq_divisor divisor; -+ u32 regs_start, regs_end; -+ u32 mem_start, mem_end; -+ u32 irq_start, irq_end; -+ int irq; -+ int enabled; -+ struct vlynq_regs *local; -+ struct vlynq_regs *remote; -+ struct device dev; -+}; -+ -+struct vlynq_driver { -+ char *name; -+ struct vlynq_device_id *id_table; -+ int (*probe)(struct vlynq_device *dev, struct vlynq_device_id *id); -+ void (*remove)(struct vlynq_device *dev); -+ struct device_driver driver; -+}; -+ -+struct plat_vlynq_ops { -+ int (*on)(struct vlynq_device *dev); -+ void (*off)(struct vlynq_device *dev); -+}; -+ -+static inline struct vlynq_driver *to_vlynq_driver(struct device_driver *drv) -+{ -+ return container_of(drv, struct vlynq_driver, driver); -+} -+ -+static inline struct vlynq_device *to_vlynq_device(struct device *device) -+{ -+ return container_of(device, struct vlynq_device, dev); -+} -+ -+extern struct bus_type vlynq_bus_type; -+ -+extern int __vlynq_register_driver(struct vlynq_driver *driver, -+ struct module *owner); -+ -+static inline int vlynq_register_driver(struct vlynq_driver *driver) -+{ -+ return __vlynq_register_driver(driver, THIS_MODULE); -+} -+ -+static inline void *vlynq_get_drvdata(struct vlynq_device *dev) -+{ -+ return dev_get_drvdata(&dev->dev); -+} -+ -+static inline void vlynq_set_drvdata(struct vlynq_device *dev, void *data) -+{ -+ dev_set_drvdata(&dev->dev, data); -+} -+ -+static inline u32 vlynq_mem_start(struct vlynq_device *dev) -+{ -+ return dev->mem_start; -+} -+ -+static inline u32 vlynq_mem_end(struct vlynq_device *dev) -+{ -+ return dev->mem_end; -+} -+ -+static inline u32 vlynq_mem_len(struct vlynq_device *dev) -+{ -+ return dev->mem_end - dev->mem_start + 1; -+} -+ -+static inline int vlynq_virq_to_irq(struct vlynq_device *dev, int virq) -+{ -+ int irq = dev->irq_start + virq; -+ if ((irq < dev->irq_start) || (irq > dev->irq_end)) -+ return -EINVAL; -+ -+ return irq; -+} -+ -+static inline int vlynq_irq_to_virq(struct vlynq_device *dev, int irq) -+{ -+ if ((irq < dev->irq_start) || (irq > dev->irq_end)) -+ return -EINVAL; -+ -+ return irq - dev->irq_start; -+} -+ -+extern void vlynq_unregister_driver(struct vlynq_driver *driver); -+extern int vlynq_enable_device(struct vlynq_device *dev); -+extern void vlynq_disable_device(struct vlynq_device *dev); -+extern int vlynq_set_local_mapping(struct vlynq_device *dev, u32 tx_offset, -+ struct vlynq_mapping *mapping); -+extern int vlynq_set_remote_mapping(struct vlynq_device *dev, u32 tx_offset, -+ struct vlynq_mapping *mapping); -+extern int vlynq_set_local_irq(struct vlynq_device *dev, int virq); -+extern int vlynq_set_remote_irq(struct vlynq_device *dev, int virq); -+ -+#endif /* __VLYNQ_H__ */ diff --git a/target/wag54g/target.mk b/target/wag54g/target.mk deleted file mode 100644 index e42414ae7..000000000 --- a/target/wag54g/target.mk +++ /dev/null @@ -1,7 +0,0 @@ -ARCH:= mips -CPU_ARCH:= mipsel -KERNEL_VERSION:= 2.6.35.7 -KERNEL_RELEASE:= 1 -KERNEL_MD5SUM:= f741879bcd3a5366a1bbe0ad5cdb7935 -TARGET_OPTIMIZATION:= -Os -pipe -TARGET_CFLAGS_ARCH:= -march=mips32 diff --git a/target/wag54g/tools/addpattern/Makefile b/target/wag54g/tools/addpattern/Makefile deleted file mode 100644 index 3ac1884fa..000000000 --- a/target/wag54g/tools/addpattern/Makefile +++ /dev/null @@ -1,4 +0,0 @@ -include $(TOPDIR)/rules.mk - -all: - $(HOSTCC) ${HOSTCFLAGS} -o ${STAGING_TOOLS}/bin/addpattern addpattern.c diff --git a/target/wag54g/tools/addpattern/addpattern.c b/target/wag54g/tools/addpattern/addpattern.c deleted file mode 100644 index 6f2a036c0..000000000 --- a/target/wag54g/tools/addpattern/addpattern.c +++ /dev/null @@ -1,255 +0,0 @@ -/* - * Copyright (C) 2004 Manuel Novoa III <mjn3@codepoet.org> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - * General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ - -/* July 29, 2004 - * - * This is a hacked replacement for the 'addpattern' utility used to - * create wrt54g .bin firmware files. It isn't pretty, but it does - * the job for me. - * - * Extensions: - * -v allows setting the version string on the command line. - * -{0|1} sets the (currently ignored) hw_ver flag in the header - * to 0 or 1 respectively. - */ - -/* January 12, 2005 - * - * Modified by rodent at rodent dot za dot net - * Support added for the new WRT54G v2.2 and WRT54GS v1.1 "flags" - * Without the flags set to 0x7, the above units will refuse to flash. - * - * Extensions: - * -{0|1|2} sets {0|1} sets hw_ver flag to 0/1. {2} sets hw_ver to 1 - * and adds the new hardware "flags" for the v2.2/v1.1 units -*/ - -/* January 1, 2007 - * - * Modified by juan.i.gonzalez at subdown dot net - * Support added for the AG241v2 and similar - * - * Extensions: - * -r #.# adds revision hardware flags. AG241v2 and similar. - * - * AG241V2 firmware sets the hw_ver to 0x44. - * - * Example: -r 2.0 - * - * Convert 2.0 to 20 to be an integer, and add 0x30 to skip special ASCII - * #define HW_Version ((HW_REV * 10) + 0x30) -> from cyutils.h -*/ - -#include <stdio.h> -#include <stdlib.h> -#include <string.h> -#include <time.h> -#include <unistd.h> -#include <sys/stat.h> - -/**********************************************************************/ - -#define CODE_ID "U2ND" /* from code_pattern.h */ -#define CODE_PATTERN "W54S" /* from code_pattern.h */ -#define PBOT_PATTERN "PBOT" - -#define CYBERTAN_VERSION "v3.37.2" /* from cyutils.h */ - -/* WRT54G v2.2 and WRT54GS v1.1 "flags" (from 3.37.32 firmware cyutils.h) */ -#define SUPPORT_4712_CHIP 0x0001 -#define SUPPORT_INTEL_FLASH 0x0002 -#define SUPPORT_5325E_SWITCH 0x0004 - -struct code_header { /* from cyutils.h */ - char magic[4]; - char res1[4]; /* for extra magic */ - char fwdate[3]; - char fwvern[3]; - char id[4]; /* U2ND */ - char hw_ver; /* 0: for 4702, 1: for 4712 -- new in 2.04.3 */ - char unused; - unsigned char flags[2]; /* SUPPORT_ flags new for 3.37.2 (WRT54G v2.2 and WRT54GS v1.1) */ - unsigned char res2[10]; -} ; - -/**********************************************************************/ - -void usage(void) __attribute__ (( __noreturn__ )); - -void usage(void) -{ - fprintf(stderr, "Usage: addpattern [-i trxfile] [-o binfile] [-p pattern] [-g] [-b] [-v v#.#.#] [-r #.#] [-{0|1|2|4}] -h\n"); - exit(EXIT_FAILURE); -} - -int main(int argc, char **argv) -{ - char buf[1024]; /* keep this at 1k or adjust garbage calc below */ - struct code_header *hdr; - FILE *in = stdin; - FILE *out = stdout; - char *ifn = NULL; - char *ofn = NULL; - char *pattern = CODE_PATTERN; - char *pbotpat = PBOT_PATTERN; - char *version = CYBERTAN_VERSION; - int gflag = 0; - int pbotflag = 0; - int c; - int v0, v1, v2; - size_t off, n; - time_t t; - struct tm *ptm; - - fprintf(stderr, "mjn3's addpattern replacement - v0.81\n"); - - hdr = (struct code_header *) buf; - memset(hdr, 0, sizeof(struct code_header)); - - while ((c = getopt(argc, argv, "i:o:p:gbv:0124hr:")) != -1) { - switch (c) { - case 'i': - ifn = optarg; - break; - case 'o': - ofn = optarg; - break; - case 'p': - pattern = optarg; - break; - case 'g': - gflag = 1; - break; - case 'b': - pbotflag = 1; - break; - case 'v': /* extension to allow setting version */ - version = optarg; - break; - case '0': - hdr->hw_ver = 0; - break; - case '1': - hdr->hw_ver = 1; - break; - case '2': /* new 54G v2.2 and 54GS v1.1 flags */ - hdr->hw_ver = 1; - hdr->flags[0] |= SUPPORT_4712_CHIP; - hdr->flags[0] |= SUPPORT_INTEL_FLASH; - hdr->flags[0] |= SUPPORT_5325E_SWITCH; - break; - case '4': - /* V4 firmware sets the flags to 0x1f */ - hdr->hw_ver = 0; - hdr->flags[0] = 0x1f; - break; - case 'r': - hdr->hw_ver = (char)(atof(optarg)*10)+0x30; - break; - - case 'h': - default: - usage(); - } - } - - if (optind != argc || optind == 1) { - fprintf(stderr, "illegal arg \"%s\"\n", argv[optind]); - usage(); - } - - if (strlen(pattern) != 4) { - fprintf(stderr, "illegal pattern \"%s\": length != 4\n", pattern); - usage(); - } - - if (ifn && !(in = fopen(ifn, "r"))) { - fprintf(stderr, "can not open \"%s\" for reading\n", ifn); - usage(); - } - - if (ofn && !(out = fopen(ofn, "w"))) { - fprintf(stderr, "can not open \"%s\" for writing\n", ofn); - usage(); - } - - if (time(&t) == (time_t)(-1)) { - fprintf(stderr, "time call failed\n"); - return EXIT_FAILURE; - } - - ptm = localtime(&t); - - if (3 != sscanf(version, "v%d.%d.%d", &v0, &v1, &v2)) { - fprintf(stderr, "bad version string \"%s\"\n", version); - return EXIT_FAILURE; - } - - memcpy(&hdr->magic, pattern, 4); - if (pbotflag) - memcpy(&hdr->res1, pbotpat, 4); - hdr->fwdate[0] = ptm->tm_year % 100; - hdr->fwdate[1] = ptm->tm_mon + 1; - hdr->fwdate[2] = ptm->tm_mday; - hdr->fwvern[0] = v0; - hdr->fwvern[1] = v1; - hdr->fwvern[2] = v2; - memcpy(&hdr->id, CODE_ID, strlen(CODE_ID)); - - off = sizeof(struct code_header); - - fprintf(stderr, "writing firmware v%d.%d.%d on %d/%d/%d (y/m/d)\n", - v0, v1, v2, - hdr->fwdate[0], hdr->fwdate[1], hdr->fwdate[2]); - - - while ((n = fread(buf + off, 1, sizeof(buf)-off, in) + off) > 0) { - off = 0; - if (n < sizeof(buf)) { - if (ferror(in)) { - FREAD_ERROR: - fprintf(stderr, "fread error\n"); - return EXIT_FAILURE; - } - if (gflag) { - gflag = sizeof(buf) - n; - memset(buf + n, 0xff, gflag); - fprintf(stderr, "adding %d bytes of garbage\n", gflag); - n = sizeof(buf); - } - } - if (!fwrite(buf, n, 1, out)) { - FWRITE_ERROR: - fprintf(stderr, "fwrite error\n"); - return EXIT_FAILURE; - } - } - - if (ferror(in)) { - goto FREAD_ERROR; - } - - if (fflush(out)) { - goto FWRITE_ERROR; - } - - fclose(in); - fclose(out); - - return EXIT_SUCCESS; -} diff --git a/target/wag54g/tools/rules.mk b/target/wag54g/tools/rules.mk deleted file mode 100644 index 8d03c031a..000000000 --- a/target/wag54g/tools/rules.mk +++ /dev/null @@ -1,9 +0,0 @@ -# $Id$ -#- -# This file is part of the OpenADK project. OpenADK is copyrighted -# material, please see the LICENCE file in the top-level directory. - -WRKDIR_BASE= ${TOOLS_BUILD_DIR} -WRKDIR= ${WRKDIR_BASE} - -include ${TOPDIR}/mk/buildhlp.mk diff --git a/target/wag54g/tools/squashfs/Makefile b/target/wag54g/tools/squashfs/Makefile deleted file mode 100644 index 0887afc22..000000000 --- a/target/wag54g/tools/squashfs/Makefile +++ /dev/null @@ -1,27 +0,0 @@ -# $Id$ -#- -# This file is part of the OpenADK project. OpenADK is copyrighted -# material, please see the LICENCE file in the top-level directory. - -include $(TOPDIR)/rules.mk - -PKG_NAME:= squashfs -PKG_VERSION:= 4.0 -PKG_RELEASE:= 1 -PKG_MD5SUM:= a3c23391da4ebab0ac4a75021ddabf96 -PKG_SITES:= ${MASTER_SITE_SOURCEFORGE:=squashfs/} -DISTFILES:= ${PKG_NAME}${PKG_VERSION}.tar.gz -WRKDIST= ${WRKDIR}/$(PKG_NAME)${PKG_VERSION} - -include ../rules.mk - -$(WRKBUILD)/.compiled: ${WRKDIST}/.prepared - $(MAKE) -C $(WRKBUILD)/squashfs-tools - touch $@ - -$(WRKBUILD)/.installed: - $(INSTALL_BIN) $(WRKBUILD)/squashfs-tools/mksquashfs \ - ${STAGING_TOOLS}/bin - touch $@ - -include $(TOPDIR)/mk/tools.mk diff --git a/target/wag54g/tools/srec2bin/Makefile b/target/wag54g/tools/srec2bin/Makefile deleted file mode 100644 index dd6a285fd..000000000 --- a/target/wag54g/tools/srec2bin/Makefile +++ /dev/null @@ -1,4 +0,0 @@ -include $(TOPDIR)/rules.mk - -all: - $(HOSTCC) ${HOSTCFLAGS} -o ${STAGING_TOOLS}/bin/srec2bin srec2bin.c diff --git a/target/wag54g/tools/srec2bin/srec2bin.c b/target/wag54g/tools/srec2bin/srec2bin.c deleted file mode 100644 index 1cffbaed9..000000000 --- a/target/wag54g/tools/srec2bin/srec2bin.c +++ /dev/null @@ -1,524 +0,0 @@ -#include <stdio.h> -#include <ctype.h> -#include <string.h> - -//Rev 0.1 Original -// 8 Jan 2001 MJH Added code to write data to Binary file -// note: outputfile is name.bin, where name is first part -// of input file. ie tmp.rec -> tmp.bin -// -// srec2bin <input SREC file> <Output Binary File> <If Present, Big Endian> -// -// TAG -// bit32u TAG_BIG = 0xDEADBE42; -// bit32u TAG_LITTLE = 0xFEEDFA42; -// -// File Structure -// -// TAG : 32 Bits -// [DATA RECORDS] -// -// Data Records Structure -// -// LENGTH : 32 Bits <- Length of DATA, excludes ADDRESS and CHECKSUM -// ADDRESS : 32 Bits -// DATA : 8 Bits * LENGTH -// CHECKSUM: 32 Bits <- 0 - (Sum of Length --> End of Data) -// -// Note : If Length == 0, Address will be Program Start -// -// -// -// -// - -#define MajRevNum 0 -#define MinRevNum 2 - - -#define EndianSwitch(x) ((x >> 24) | (x << 24) | ((x << 8) & (0x00FF0000)) | ((x >> 8) & (0x0000FF00)) ) - -typedef unsigned char bit8u; -typedef unsigned int bit32u; -typedef int bit32; - -#define FALSE 0 -#define TRUE (!FALSE) - - -bit32u CheckSum; -int RecStart; -int debug; -int verbose; - -FILE *OpenOutputFile( char *Name ); -FILE *fOut; -bit32u RecLength=0; - -bit32u AddressCurrent; - -bit32u gh(char *cp,int nibs); - -int BigEndian; - -int inputline; - -// char buf[16*1024]; - -char buffer[2048]; -char *cur_ptr; -int cur_line=0; -int cur_len=0; - -int s1s2s3_total=0; - -bit32u PBVal; -int PBValid; -bit32u PBAdr; - - -void dumpfTell(char *s, bit32u Value) -{ - int Length; - Length = (int) RecLength; - if (debug) - printf("[%s ] ftell()[0x%08lX] Length[0x%4X] Length[%4d] Value[0x%08x]\n", - s, ftell(fOut), Length, Length, Value); -} - -void DispHex(bit32u Hex) -{ -// printf("%X", Hex); -} - -void WaitDisplay(void) -{ - static int Count=0; - static int Index=0; - char iline[]={"-\\|/"}; - - Count++; - if ((Count % 32)==0) - { - if (verbose) - printf("%c%c",iline[Index++],8); - Index &= 3; - } -} - - -void binOut32 ( bit32u Data ) -{ -// On UNIX machine all 32bit writes need ENDIAN switched -// Data = EndianSwitch(Data); -// fwrite( &Data, sizeof(bit32u), 1, fOut); - - char sdat[4]; - int i; - - for(i=0;i<4;i++) - sdat[i]=(char)(Data>>(i*8)); - fwrite( sdat, 1, 4, fOut); - dumpfTell("Out32" , Data); -} - -// Only update RecLength on Byte Writes -// All 32 bit writes will be for Length etc - -void binOut8 ( bit8u Data ) -{ - int n; - dumpfTell("B4Data" , (bit32u) (Data & 0xFF) ); - n = fwrite( &Data, sizeof(bit8u), 1, fOut); - if (n != 1) - printf("Error in writing %X for Address 0x%8X\n", Data, AddressCurrent); - RecLength += 1; -} - -// Currently ONLY used for outputting Program Start - -void binRecStart(bit32u Address) -{ - RecLength = 0; - CheckSum = Address; - RecStart = TRUE; - - if (debug) - printf("[RecStart] CheckSum[0x%08X] Length[%4d] Address[0x%08X]\n", - CheckSum, RecLength, Address); - - - dumpfTell("RecLength", RecLength); - binOut32( RecLength ); - dumpfTell("Address", Address); - binOut32( Address ); -} - -void binRecEnd(void) -{ - long RecEnd; - - if (!RecStart) // if no record started, do not end it - { - return; - } - - RecStart = FALSE; - - - RecEnd = ftell(fOut); // Save Current position - - if (debug) - printf("[RecEnd ] CheckSum[0x%08X] Length[%4d] Length[0x%X] RecEnd[0x%08lX]\n", - CheckSum, RecLength, RecLength, RecEnd); - - fseek( fOut, -((long) RecLength), SEEK_CUR); // move back Start Of Data - - dumpfTell("Data ", -1); - - fseek( fOut, -4, SEEK_CUR); // move back Start Of Address - - dumpfTell("Address ", -1); - - fseek( fOut, -4, SEEK_CUR); // move back Start Of Length - - dumpfTell("Length ", -1); - - binOut32( RecLength ); - - fseek( fOut, RecEnd, SEEK_SET); // move to end of Record - - CheckSum += RecLength; - - CheckSum = ~CheckSum + 1; // Two's complement - - binOut32( CheckSum ); - - if (verbose) - printf("[Created Record of %d Bytes with CheckSum [0x%8X]\n", RecLength, CheckSum); -} - -void binRecOutProgramStart(bit32u Address) -{ - if (Address != (AddressCurrent+1)) - { - binRecEnd(); - binRecStart(Address); - } - AddressCurrent = Address; -} -void binRecOutByte(bit32u Address, bit8u Data) -{ - // If Address is one after Current Address, output Byte - // If not, close out last record, update Length, write checksum - // Then Start New Record, updating Current Address - - if (Address != (AddressCurrent+1)) - { - binRecEnd(); - binRecStart(Address); - } - AddressCurrent = Address; - CheckSum += Data; - binOut8( Data ); -} - -//============================================================================= -// SUPPORT FUNCTIONS -//============================================================================= -int readline(FILE *fil,char *buf,int len) -{ - int rlen; - - rlen=0; - if (len==0) return(0); - while(1) - { - if (cur_len==0) - { - cur_len=fread(buffer, 1, sizeof(buffer), fil); - if (cur_len==0) - { - if (rlen) - { - *buf=0; - return(rlen); - } - return(-1); - } - cur_ptr=buffer; - } - if (cur_len) - { - if (*cur_ptr=='\n') - { - *buf=0; - cur_ptr++; - cur_len--; - return(rlen); - } - else - { - if ((len>1)&&(*cur_ptr!='\r')) - { - *buf++=*cur_ptr++; - len--; - } - else - cur_ptr++; - - rlen++; - cur_len--; - } - } - else - { - *buf=0; - cur_ptr++; - cur_len--; - return(rlen); - } - } -} - - -int SRLerrorout(char *c1,char *c2) -{ - printf("\nERROR: %s - '%s'.",c1,c2); - return(FALSE); -} - - -int checksum(char *cp,int count) -{ - char *scp; - int cksum; - int dum; - - scp=cp; - while(*scp) - { - if (!isxdigit(*scp++)) - return(SRLerrorout("Invalid hex digits",cp)); - } - scp=cp; - - cksum=count; - - while(count) - { - cksum += gh(scp,2); - if (count == 2) - dum = ~cksum; - scp += 2; - count--; - } - cksum&=0x0ff; - // printf("\nCk:%02x",cksum); - return(cksum==0x0ff); -} - -bit32u gh(char *cp,int nibs) -{ - int i; - bit32u j; - - j=0; - - for(i=0;i<nibs;i++) - { - j<<=4; - if ((*cp>='a')&&(*cp<='z')) *cp &= 0x5f; - if ((*cp>='0')&&(*cp<='9')) - j += (*cp-0x30); - else - if ((*cp>='A')&&(*cp<='F')) - j += (*cp-0x37); - else - SRLerrorout("Bad Hex char", cp); - cp++; - } - return(j); -} - - -//============================================================================= -// PROCESS SREC LINE -//============================================================================= - -int srecLine(char *pSrecLine) -{ - char *scp,ch; - int itmp,count,dat; - bit32u adr; - static bit32u RecordCounter=0; - - cur_line++; - scp=pSrecLine; - - if (*pSrecLine!='S') - return(SRLerrorout("Not an Srecord file",scp)); - pSrecLine++; - if (strlen(pSrecLine)<4) - return(SRLerrorout("Srecord too short",scp)); - - ch=*pSrecLine++; - - count=gh(pSrecLine,2); - - pSrecLine += 2; - - // if(debug) - // printf("count %d, strlen(pSrecLine) = %d, pSrecLine =[%s]\n", count, strlen(pSrecLine), pSrecLine); - RecordCounter++; - DispHex(RecordCounter); - - if ((count*2) != strlen(pSrecLine)) return(SRLerrorout("Count field larger than record",scp)); - - if (!checksum(pSrecLine, count)) return(SRLerrorout("Bad Checksum",scp)); - - switch(ch) - { - case '0': if (count<3) return(SRLerrorout("Invalid Srecord count field",scp)); - itmp=gh(pSrecLine,4); pSrecLine+=4; count-=2; - if (itmp) return(SRLerrorout("Srecord 1 address not zero",scp)); - break; - case '1': if (count<3) return(SRLerrorout("Invalid Srecord count field",scp)); - return(SRLerrorout("Srecord Not valid for MIPS",scp)); - break; - case '2': if (count<4) return(SRLerrorout("Invalid Srecord count field",scp)); - return(SRLerrorout("Srecord Not valid for MIPS",scp)); - break; - case '3': if (count<5) return(SRLerrorout("Invalid Srecord count field",scp)); - adr=gh(pSrecLine,8); pSrecLine+=8; count-=4; - count--; - while(count) - { - dat=gh(pSrecLine,2); pSrecLine+=2; count--; - binRecOutByte(adr, (char) (dat & 0xFF)); - adr++; - } - s1s2s3_total++; - break; - case '4': return(SRLerrorout("Invalid Srecord type",scp)); - break; - case '5': if (count<3) return(SRLerrorout("Invalid Srecord count field",scp)); - itmp=gh(pSrecLine,4); pSrecLine+=4; count-=2; - if (itmp|=s1s2s3_total) return(SRLerrorout("Incorrect number of S3 Record processed",scp)); - break; - case '6': return(SRLerrorout("Invalid Srecord type",scp)); - break; - case '7': // PROGRAM START - if (count<5) return(SRLerrorout("Invalid Srecord count field",scp)); - adr=gh(pSrecLine,8); pSrecLine+=8; count-=4; - if (count!=1) return(SRLerrorout("Invalid Srecord count field",scp)); - binRecOutProgramStart(adr); - break; - case '8': if (count<4) return(SRLerrorout("Invalid Srecord count field",scp)); - return(SRLerrorout("Srecord Not valid for MIPS",scp)); - break; - case '9': if (count<3) return(SRLerrorout("Invalid Srecord count field",scp)); - return(SRLerrorout("Srecord Not valid for MIPS",scp)); - break; - default: - break; - } - return(TRUE); -} - - -//============================================================================= -// MAIN LOGIC, READS IN LINE AND OUTPUTS BINARY -//============================================================================= - -int srec2bin(int argc,char *argv[],int verbose) -{ - int i,rlen,sts; - FILE *fp; - char ac; - char buff[256]; - bit32u TAG_BIG = 0xDEADBE42; - bit32u TAG_LITTLE = 0xFEEDFA42; - - bit32u Tag; - - - if(argc < 3) - { - printf("\nError: <srec2bin <srec input file> <bin output file>\n\n"); - return(0); - } - - if (argc > 3) BigEndian=TRUE; else BigEndian=FALSE; - - if (BigEndian) - Tag = TAG_BIG; - else - Tag = TAG_LITTLE; - - if (verbose) - printf("\nEndian: %s, Tag is 0x%8X\n",(BigEndian)?"BIG":"LITTLE", Tag); - - fp = fopen(argv[1],"rt"); - - if (fp==NULL) - { - printf("\nError: Opening input file, %s.", argv[1]); - return(0); - } - - fOut = fopen( argv[2], "wb"); - - if (fOut==NULL) - { - printf("\nError: Opening Output file, %s.", argv[2]); - if(fp) fclose(fp); - return(0); - } - - RecStart = FALSE; - - AddressCurrent = 0xFFFFFFFFL; - - // Setup Tag - - dumpfTell("Tag", Tag); - - binOut32(Tag); - - - inputline=0; - sts=TRUE; - - rlen = readline(fp,buff,sizeof buff); - - while( (sts) && (rlen != -1)) - { - if (strlen(buff)) - { - sts &= srecLine(buff); - WaitDisplay(); - } - rlen = readline(fp,buff,sizeof buff); - } - - - // printf("PC: 0x%08X, Length 0x%08X, Tag 0x%08X\n", ProgramStart, RecLength, TAG_LITTLE); - - binRecEnd(); - - if(fp) fclose(fp); - if(fOut) fclose(fOut); - - return(1); -} - -main(int argc, char *argv[]) -{ - debug = TRUE; - debug = FALSE; - verbose = FALSE; - srec2bin(argc,argv,verbose); - return 0; -} - diff --git a/target/wag54g/uclibc.config b/target/wag54g/uclibc.config deleted file mode 100644 index bc9ffb3fc..000000000 --- a/target/wag54g/uclibc.config +++ /dev/null @@ -1,233 +0,0 @@ -# -# Automatically generated make config: don't edit -# Version: 0.9.30.1 -# Sun Aug 23 20:28:49 2009 -# -# TARGET_alpha is not set -# TARGET_arm is not set -# TARGET_avr32 is not set -# TARGET_bfin is not set -# TARGET_cris is not set -# TARGET_e1 is not set -# TARGET_frv is not set -# TARGET_h8300 is not set -# TARGET_hppa is not set -# TARGET_i386 is not set -# TARGET_i960 is not set -# TARGET_ia64 is not set -# TARGET_m68k is not set -# TARGET_microblaze is not set -TARGET_mips=y -# TARGET_nios is not set -# TARGET_nios2 is not set -# TARGET_powerpc is not set -# TARGET_sh is not set -# TARGET_sh64 is not set -# TARGET_sparc is not set -# TARGET_v850 is not set -# TARGET_vax is not set -# TARGET_x86_64 is not set -# TARGET_xtensa is not set - -# -# Target Architecture Features and Options -# -TARGET_ARCH="mips" -FORCE_OPTIONS_FOR_ARCH=y -ARCH_CFLAGS="-mno-split-addresses" -CONFIG_MIPS_O32_ABI=y -# CONFIG_MIPS_N32_ABI is not set -# CONFIG_MIPS_N64_ABI is not set -# CONFIG_MIPS_ISA_1 is not set -# CONFIG_MIPS_ISA_2 is not set -# CONFIG_MIPS_ISA_3 is not set -# CONFIG_MIPS_ISA_4 is not set -CONFIG_MIPS_ISA_MIPS32=y -# CONFIG_MIPS_ISA_MIPS32R2 is not set -# CONFIG_MIPS_ISA_MIPS64 is not set -TARGET_SUBARCH="" - -# -# Using ELF file format -# -ARCH_ANY_ENDIAN=y -ARCH_LITTLE_ENDIAN=y -# ARCH_WANTS_BIG_ENDIAN is not set -ARCH_WANTS_LITTLE_ENDIAN=y -ARCH_HAS_MMU=y -ARCH_USE_MMU=y -UCLIBC_HAS_FLOATS=y -UCLIBC_HAS_FPU=y -DO_C99_MATH=y -UCLIBC_HAS_FENV=y -KERNEL_HEADERS="/home/wbx/lemote/toolchain_build_mipsel/libc_dev/usr/include" -HAVE_DOT_CONFIG=y - -# -# General Library Settings -# -# HAVE_NO_PIC is not set -DOPIC=y -# ARCH_HAS_NO_SHARED is not set -# ARCH_HAS_NO_LDSO is not set -HAVE_SHARED=y -# FORCE_SHAREABLE_TEXT_SEGMENTS is not set -LDSO_LDD_SUPPORT=y -LDSO_CACHE_SUPPORT=y -# LDSO_PRELOAD_FILE_SUPPORT is not set -LDSO_BASE_FILENAME="ld.so" -# UCLIBC_STATIC_LDCONFIG is not set -LDSO_RUNPATH=y -UCLIBC_CTOR_DTOR=y -# LDSO_GNU_HASH_SUPPORT is not set -# HAS_NO_THREADS is not set -UCLIBC_HAS_THREADS=y -# PTHREADS_DEBUG_SUPPORT is not set -LINUXTHREADS_OLD=y -UCLIBC_HAS_SYSLOG=y -UCLIBC_HAS_LFS=y -# MALLOC is not set -# MALLOC_SIMPLE is not set -MALLOC_STANDARD=y -MALLOC_GLIBC_COMPAT=y -UCLIBC_DYNAMIC_ATEXIT=y -COMPAT_ATEXIT=y -UCLIBC_SUSV3_LEGACY=y -# UCLIBC_SUSV3_LEGACY_MACROS is not set -# UCLIBC_HAS_STUBS is not set -UCLIBC_HAS_SHADOW=y -UCLIBC_HAS_PROGRAM_INVOCATION_NAME=y -UCLIBC_HAS___PROGNAME=y -UCLIBC_HAS_PTY=y -ASSUME_DEVPTS=y -UNIX98PTY_ONLY=y -# UCLIBC_HAS_GETPT is not set -UCLIBC_HAS_TM_EXTENSIONS=y -UCLIBC_HAS_TZ_CACHING=y -UCLIBC_HAS_TZ_FILE=y -UCLIBC_HAS_TZ_FILE_READ_MANY=y -UCLIBC_TZ_FILE_PATH="/etc/TZ" - -# -# Advanced Library Settings -# -UCLIBC_PWD_BUFFER_SIZE=256 -UCLIBC_GRP_BUFFER_SIZE=256 - -# -# Support various families of functions -# -# UCLIBC_LINUX_MODULE_24 is not set -UCLIBC_LINUX_SPECIFIC=y -UCLIBC_HAS_GNU_ERROR=y -UCLIBC_BSD_SPECIFIC=y -UCLIBC_HAS_BSD_ERR=y -# UCLIBC_HAS_OBSOLETE_BSD_SIGNAL is not set -# UCLIBC_HAS_OBSOLETE_SYSV_SIGNAL is not set -# UCLIBC_NTP_LEGACY is not set -# UCLIBC_SV4_DEPRECATED is not set -UCLIBC_HAS_REALTIME=y -UCLIBC_HAS_ADVANCED_REALTIME=y -UCLIBC_HAS_EPOLL=y -UCLIBC_HAS_XATTR=y -# UCLIBC_HAS_PROFILING is not set -UCLIBC_HAS_CRYPT_IMPL=y -UCLIBC_HAS_CRYPT=y -UCLIBC_HAS_NETWORK_SUPPORT=y -UCLIBC_HAS_SOCKET=y -UCLIBC_HAS_IPV4=y -UCLIBC_HAS_IPV6=y -UCLIBC_HAS_RPC=y -UCLIBC_HAS_FULL_RPC=y -UCLIBC_HAS_REENTRANT_RPC=y -UCLIBC_USE_NETLINK=y -UCLIBC_SUPPORT_AI_ADDRCONFIG=y -UCLIBC_HAS_BSD_RES_CLOSE=y - -# -# String and Stdio Support -# -UCLIBC_HAS_STRING_GENERIC_OPT=y -UCLIBC_HAS_STRING_ARCH_OPT=y -UCLIBC_HAS_CTYPE_TABLES=y -UCLIBC_HAS_CTYPE_SIGNED=y -# UCLIBC_HAS_CTYPE_UNSAFE is not set -UCLIBC_HAS_CTYPE_CHECKED=y -# UCLIBC_HAS_CTYPE_ENFORCED is not set -UCLIBC_HAS_WCHAR=y -# UCLIBC_HAS_LOCALE is not set -UCLIBC_HAS_HEXADECIMAL_FLOATS=y -UCLIBC_HAS_GLIBC_CUSTOM_PRINTF=y -UCLIBC_PRINTF_SCANF_POSITIONAL_ARGS=9 -UCLIBC_HAS_SCANF_GLIBC_A_FLAG=y -# UCLIBC_HAS_STDIO_BUFSIZ_NONE is not set -# UCLIBC_HAS_STDIO_BUFSIZ_256 is not set -# UCLIBC_HAS_STDIO_BUFSIZ_512 is not set -# UCLIBC_HAS_STDIO_BUFSIZ_1024 is not set -# UCLIBC_HAS_STDIO_BUFSIZ_2048 is not set -UCLIBC_HAS_STDIO_BUFSIZ_4096=y -# UCLIBC_HAS_STDIO_BUFSIZ_8192 is not set -UCLIBC_HAS_STDIO_BUILTIN_BUFFER_NONE=y -# UCLIBC_HAS_STDIO_BUILTIN_BUFFER_4 is not set -# UCLIBC_HAS_STDIO_BUILTIN_BUFFER_8 is not set -# UCLIBC_HAS_STDIO_SHUTDOWN_ON_ABORT is not set -UCLIBC_HAS_STDIO_GETC_MACRO=y -UCLIBC_HAS_STDIO_PUTC_MACRO=y -UCLIBC_HAS_STDIO_AUTO_RW_TRANSITION=y -# UCLIBC_HAS_FOPEN_LARGEFILE_MODE is not set -UCLIBC_HAS_FOPEN_EXCLUSIVE_MODE=y -UCLIBC_HAS_GLIBC_CUSTOM_STREAMS=y -UCLIBC_HAS_PRINTF_M_SPEC=y -UCLIBC_HAS_ERRNO_MESSAGES=y -# UCLIBC_HAS_SYS_ERRLIST is not set -UCLIBC_HAS_SIGNUM_MESSAGES=y -# UCLIBC_HAS_SYS_SIGLIST is not set -UCLIBC_HAS_GNU_GETOPT=y -UCLIBC_HAS_GNU_GETSUBOPT=y - -# -# Big and Tall -# -UCLIBC_HAS_REGEX=y -UCLIBC_HAS_REGEX_OLD=y -UCLIBC_HAS_FNMATCH=y -UCLIBC_HAS_FNMATCH_OLD=y -UCLIBC_HAS_WORDEXP=y -UCLIBC_HAS_FTW=y -UCLIBC_HAS_GLOB=y -UCLIBC_HAS_GNU_GLOB=y - -# -# Library Installation Options -# -SHARED_LIB_LOADER_PREFIX="/lib" -RUNTIME_PREFIX="/" -DEVEL_PREFIX="/usr/" - -# -# Security options -# -# UCLIBC_BUILD_PIE is not set -UCLIBC_HAS_ARC4RANDOM=y -# HAVE_NO_SSP is not set -# UCLIBC_HAS_SSP is not set -UCLIBC_BUILD_RELRO=y -# UCLIBC_BUILD_NOW is not set -UCLIBC_BUILD_NOEXECSTACK=y - -# -# uClibc development/debugging options -# -CROSS_COMPILER_PREFIX="" -UCLIBC_EXTRA_CFLAGS="" -# DODEBUG is not set -# DODEBUG_PT is not set -DOSTRIP=y -# DOASSERTS is not set -# SUPPORT_LD_DEBUG is not set -# SUPPORT_LD_DEBUG_EARLY is not set -# UCLIBC_MALLOC_DEBUGGING is not set -WARNINGS="-Wall" -# EXTRA_WARNINGS is not set -# DOMULTI is not set -# UCLIBC_MJN3_ONLY is not set |