Initial import

24 files changed, 6712 insertions, 0 deletions

diff --git a/package/busybox/config/Config.in b/package/busybox/config/Config.in
new file mode 100644
index 000000000..b8894d4c5
--- /dev/null
+++ b/package/busybox/config/Config.in
@@ -0,0 +1,605 @@
+#
+# For a description of the syntax of this configuration file,
+# see scripts/kbuild/config-language.txt.
+#
+
+# mainmenu "BusyBox Configuration"
+
+config BUSYBOX_HAVE_DOT_CONFIG
+	bool
+	default y
+
+menu "Busybox Settings"
+
+menu "General Configuration"
+
+config BUSYBOX_DESKTOP
+	bool "Enable options for full-blown desktop systems"
+	default n
+	help
+	  Enable options and features which are not essential.
+	  Select this only if you plan to use busybox on full-blown
+	  desktop machine with common Linux distro, not on an embedded box.
+
+config BUSYBOX_EXTRA_COMPAT
+	bool "Provide compatible behavior for rare corner cases (bigger code)"
+	default n
+	help
+	  This option makes grep, sed etc handle rare corner cases
+	  (embedded NUL bytes and such). This makes code bigger and uses
+	  some GNU extensions in libc. You probably only need this option
+	  if you plan to run busybox on desktop.
+
+config BUSYBOX_FEATURE_ASSUME_UNICODE
+	bool "Assume that 1:1 char/glyph correspondence is not true"
+	default n
+	help
+	  This makes various applets aware that one byte is not
+	  one character on screen.
+
+	  Busybox aims to eventually work correctly with Unicode displays.
+	  Any older encodings are not guaranteed to work.
+	  Probably by the time when busybox will be fully Unicode-clean,
+	  other encodings will be mainly of historic interest.
+
+choice
+	prompt "Buffer allocation policy"
+	default FEATURE_BUFFERS_USE_MALLOC
+	help
+	  There are 3 ways BusyBox can handle buffer allocations:
+	  - Use malloc. This costs code size for the call to xmalloc.
+	  - Put them on stack. For some very small machines with limited stack
+	    space, this can be deadly. For most folks, this works just fine.
+	  - Put them in BSS. This works beautifully for computers with a real
+	    MMU (and OS support), but wastes runtime RAM for uCLinux. This
+	    behavior was the only one available for BusyBox versions 0.48 and
+	    earlier.
+
+config BUSYBOX_FEATURE_BUFFERS_USE_MALLOC
+	bool "Allocate with Malloc"
+
+config BUSYBOX_FEATURE_BUFFERS_GO_ON_STACK
+	bool "Allocate on the Stack"
+
+config BUSYBOX_FEATURE_BUFFERS_GO_IN_BSS
+	bool "Allocate in the .bss section"
+
+endchoice
+
+config BUSYBOX_SHOW_USAGE
+	bool "Show terse applet usage messages"
+	default y
+	help
+	  All BusyBox applets will show help messages when invoked with
+	  wrong arguments. You can turn off printing these terse usage
+	  messages if you say no here.
+	  This will save you up to 7k.
+
+config BUSYBOX_FEATURE_VERBOSE_USAGE
+	bool "Show verbose applet usage messages"
+	default y
+	select BUSYBOX_SHOW_USAGE
+	help
+	  All BusyBox applets will show more verbose help messages when
+	  busybox is invoked with --help. This will add a lot of text to the
+	  busybox binary. In the default configuration, this will add about
+	  13k, but it can add much more depending on your configuration.
+
+config BUSYBOX_FEATURE_COMPRESS_USAGE
+	bool "Store applet usage messages in compressed form"
+	default y
+	depends on BUSYBOX_SHOW_USAGE
+	help
+	  Store usage messages in compressed form, uncompress them on-the-fly
+	  when <applet> --help is called.
+
+	  If you have a really tiny busybox with few applets enabled (and
+	  bunzip2 isn't one of them), the overhead of the decompressor might
+	  be noticeable. Also, if you run executables directly from ROM
+	  and have very little memory, this might not be a win. Otherwise,
+	  you probably want this.
+
+config BUSYBOX_FEATURE_INSTALLER
+	bool "Support --install [-s] to install applet links at runtime"
+	default n
+	help
+	  Enable 'busybox --install [-s]' support. This will allow you to use
+	  busybox at runtime to create hard links or symlinks for all the
+	  applets that are compiled into busybox.
+
+config BUSYBOX_LOCALE_SUPPORT
+	bool "Enable locale support (system needs locale for this to work)"
+	default n
+	help
+	  Enable this if your system has locale support and you would like
+	  busybox to support locale settings.
+
+config BUSYBOX_GETOPT_LONG
+	bool "Support for --long-options"
+	default y
+	help
+	  Enable this if you want busybox applets to use the gnu --long-option
+	  style, in addition to single character -a -b -c style options.
+
+config BUSYBOX_FEATURE_DEVPTS
+	bool "Use the devpts filesystem for Unix98 PTYs"
+	default y
+	help
+	  Enable if you want BusyBox to use Unix98 PTY support. If enabled,
+	  busybox will use /dev/ptmx for the master side of the pseudoterminal
+	  and /dev/pts/<number> for the slave side. Otherwise, BSD style
+	  /dev/ttyp<number> will be used. To use this option, you should have
+	  devpts mounted.
+
+config BUSYBOX_FEATURE_CLEAN_UP
+	bool "Clean up all memory before exiting (usually not needed)"
+	default n
+	help
+	  As a size optimization, busybox normally exits without explicitly
+	  freeing dynamically allocated memory or closing files. This saves
+	  space since the OS will clean up for us, but it can confuse debuggers
+	  like valgrind, which report tons of memory and resource leaks.
+
+	  Don't enable this unless you have a really good reason to clean
+	  things up manually.
+
+config BUSYBOX_FEATURE_PIDFILE
+	bool "Support writing pidfiles"
+	default n
+	help
+	  This option makes some applets (e.g. crond, syslogd, inetd) write
+	  a pidfile in /var/run. Some applications rely on them.
+
+config BUSYBOX_FEATURE_SUID
+	bool "Support for SUID/SGID handling"
+	default y
+	help
+	  With this option you can install the busybox binary belonging
+	  to root with the suid bit set, and it will automatically drop
+	  priviledges for applets that don't need root access.
+
+	  If you are really paranoid and don't want to do this, build two
+	  busybox binaries with different applets in them (and the appropriate
+	  symlinks pointing to each binary), and only set the suid bit on the
+	  one that needs it. The applets currently marked to need the suid bit
+	  are:
+
+	  crontab, dnsd, findfs, ipcrm, ipcs, login, passwd, ping, su,
+	  traceroute, vlock.
+
+config BUSYBOX_FEATURE_SUID_CONFIG
+	bool "Runtime SUID/SGID configuration via /etc/busybox.conf"
+	default n if FEATURE_SUID
+	depends on BUSYBOX_FEATURE_SUID
+	help
+	  Allow the SUID / SGID state of an applet to be determined at runtime
+	  by checking /etc/busybox.conf. (This is sort of a poor man's sudo.)
+	  The format of this file is as follows:
+
+	  <applet> = [Ssx-][Ssx-][x-] (<username>|<uid>).(<groupname>|<gid>)
+
+	  An example might help:
+
+	  [SUID]
+	  su = ssx root.0 # applet su can be run by anyone and runs with
+	                  # euid=0/egid=0
+	  su = ssx        # exactly the same
+
+	  mount = sx- root.disk # applet mount can be run by root and members
+	                        # of group disk and runs with euid=0
+
+	  cp = --- # disable applet cp for everyone
+
+	  The file has to be owned by user root, group root and has to be
+	  writeable only by root:
+	        (chown 0.0 /etc/busybox.conf; chmod 600 /etc/busybox.conf)
+	  The busybox executable has to be owned by user root, group
+	  root and has to be setuid root for this to work:
+	        (chown 0.0 /bin/busybox; chmod 4755 /bin/busybox)
+
+	  Robert 'sandman' Griebl has more information here:
+	  <url: http://www.softforge.de/bb/suid.html >.
+
+config BUSYBOX_FEATURE_SUID_CONFIG_QUIET
+	bool "Suppress warning message if /etc/busybox.conf is not readable"
+	default y
+	depends on BUSYBOX_FEATURE_SUID_CONFIG
+	help
+	  /etc/busybox.conf should be readable by the user needing the SUID,
+	  check this option to avoid users to be notified about missing
+	  permissions.
+
+#config BUSYBOX_SELINUX
+#	bool "Support NSA Security Enhanced Linux"
+#	default n
+#	help
+#	  Enable support for SELinux in applets ls, ps, and id. Also provide
+#	  the option of compiling in SELinux applets.
+#
+#	  If you do not have a complete SELinux userland installed, this stuff
+#	  will not compile. Go visit
+#		http://www.nsa.gov/selinux/index.html
+#	  to download the necessary stuff to allow busybox to compile with
+#	  this option enabled. Specifially, libselinux 1.28 or better is
+#	  directly required by busybox. If the installation is located in a
+#	  non-standard directory, provide it by invoking make as follows:
+#		CFLAGS=-I<libselinux-include-path> \
+#		LDFLAGS=-L<libselinux-lib-path> \
+#		make
+#
+#	  Most people will leave this set to 'N'.
+
+config BUSYBOX_FEATURE_PREFER_APPLETS
+	bool "exec prefers applets"
+	default n
+	help
+	  This is an experimental option which directs applets about to
+	  call 'exec' to try and find an applicable busybox applet before
+	  searching the PATH. This is typically done by exec'ing
+	  /proc/self/exe.
+	  This may affect shell, find -exec, xargs and similar applets.
+	  They will use applets even if /bin/<applet> -> busybox link
+	  is missing (or is not a link to busybox). However, this causes
+	  problems in chroot jails without mounted /proc and with ps/top
+	  (command name can be shown as 'exe' for applets started this way).
+
+config BUSYBOX_BUSYBOX_EXEC_PATH
+	string "Path to BusyBox executable"
+	default "/proc/self/exe"
+	help
+	  When Busybox applets need to run other busybox applets, BusyBox
+	  sometimes needs to exec() itself. When the /proc filesystem is
+	  mounted, /proc/self/exe always points to the currently running
+	  executable. If you haven't got /proc, set this to wherever you
+	  want to run BusyBox from.
+
+# These are auto-selected by other options
+
+config BUSYBOX_FEATURE_SYSLOG
+	bool #No description makes it a hidden option
+	default n
+	#help
+	#  This option is auto-selected when you select any applet which may
+	#  send its output to syslog. You do not need to select it manually.
+
+config BUSYBOX_FEATURE_HAVE_RPC
+	bool #No description makes it a hidden option
+	default n
+	#help
+	#  This is automatically selected if any of enabled applets need it.
+	#  You do not need to select it manually.
+
+endmenu
+
+menu 'Build Options'
+
+#config BUSYBOX_STATIC
+#	bool "Build BusyBox as a static binary (no shared libs)"
+#	default n
+#	help
+#	  If you want to build a static BusyBox binary, which does not
+#	  use or require any shared libraries, then enable this option.
+#	  This can cause BusyBox to be considerably larger, so you should
+#	  leave this option false unless you have a good reason (i.e.
+#	  your target platform does not support shared libraries, or
+#	  you are building an initrd which doesn't need anything but
+#	  BusyBox, etc).
+#
+#	  Most people will leave this set to 'N'.
+#
+#config BUSYBOX_PIE
+#	bool "Build BusyBox as a position independent executable"
+#	default n
+#	depends on !BUSYBOX_STATIC
+#	help
+#	  (TODO: what is it and why/when is it useful?)
+#	  Most people will leave this set to 'N'.
+#
+#config BUSYBOX_NOMMU
+#	bool "Force NOMMU build"
+#	default n
+#	help
+#	  Busybox tries to detect whether architecture it is being
+#	  built against supports MMU or not. If this detection fails,
+#	  or if you want to build NOMMU version of busybox for testing,
+#	  you may force NOMMU build here.
+#
+#	  Most people will leave this set to 'N'.
+
+# PIE can be made to work with BUILD_LIBBUSYBOX, but currently
+# build system does not support that
+#config BUSYBOX_BUILD_LIBBUSYBOX
+#	bool "Build shared libbusybox"
+#	default n
+#	depends on !BUSYBOX_FEATURE_PREFER_APPLETS && !BUSYBOX_PIE && !BUSYBOX_STATIC
+#	help
+#	  Build a shared library libbusybox.so.N.N.N which contains all
+#	  busybox code.
+#
+#	  This feature allows every applet to be built as a tiny
+#	  separate executable. Enabling it for "one big busybox binary"
+#	  approach serves no purpose and increases code size.
+#	  You should almost certainly say "no" to this.
+
+### config FEATURE_FULL_LIBBUSYBOX
+###	bool "Feature-complete libbusybox"
+###	default n if !FEATURE_SHARED_BUSYBOX
+###	depends on BUSYBOX_BUILD_LIBBUSYBOX
+###	help
+###	  Build a libbusybox with the complete feature-set, disregarding
+###	  the actually selected config.
+###
+###	  Normally, libbusybox will only contain the features which are
+###	  used by busybox itself. If you plan to write a separate
+###	  standalone application which uses libbusybox say 'Y'.
+###
+###	  Note: libbusybox is GPL, not LGPL, and exports no stable API that
+###	  might act as a copyright barrier. We can and will modify the
+###	  exported function set between releases (even minor version number
+###	  changes), and happily break out-of-tree features.
+###
+###	  Say 'N' if in doubt.
+
+#config BUSYBOX_FEATURE_INDIVIDUAL
+#	bool "Produce a binary for each applet, linked against libbusybox"
+#	default y
+#	depends on BUSYBOX_BUILD_LIBBUSYBOX
+#	help
+#	  If your CPU architecture doesn't allow for sharing text/rodata
+#	  sections of running binaries, but allows for runtime dynamic
+#	  libraries, this option will allow you to reduce memory footprint
+#	  when you have many different applets running at once.
+#
+#	  If your CPU architecture allows for sharing text/rodata,
+#	  having single binary is more optimal.
+#
+#	  Each applet will be a tiny program, dynamically linked
+#	  against libbusybox.so.N.N.N.
+#
+#	  You need to have a working dynamic linker.
+
+#config BUSYBOX_FEATURE_SHARED_BUSYBOX
+#	bool "Produce additional busybox binary linked against libbusybox"
+#	default y
+#	depends on BUSYBOX_BUILD_LIBBUSYBOX
+#	help
+#	  Build busybox, dynamically linked against libbusybox.so.N.N.N.
+#
+#	  You need to have a working dynamic linker.
+
+### config BUILD_AT_ONCE
+###	bool "Compile all sources at once"
+###	default n
+###	help
+###	  Normally each source-file is compiled with one invocation of
+###	  the compiler.
+###	  If you set this option, all sources are compiled at once.
+###	  This gives the compiler more opportunities to optimize which can
+###	  result in smaller and/or faster binaries.
+###
+###	  Setting this option will consume alot of memory, e.g. if you
+###	  enable all applets with all features, gcc uses more than 300MB
+###	  RAM during compilation of busybox.
+###
+###	  This option is most likely only beneficial for newer compilers
+###	  such as gcc-4.1 and above.
+###
+###	  Say 'N' unless you know what you are doing.
+
+config BUSYBOX_LFS
+	bool "Build with Large File Support (for accessing files > 2 GB)"
+	default y
+	select BUSYBOX_FDISK_SUPPORT_LARGE_DISKS
+	help
+	  If you want to build BusyBox with large file support, then enable
+	  this option. This will have no effect if your kernel or your C
+	  library lacks large file support for large files. Some of the
+	  programs that can benefit from large file support include dd, gzip,
+	  cp, mount, tar, and many others. If you want to access files larger
+	  than 2 Gigabytes, enable this option. Otherwise, leave it set to 'N'.
+
+config BUSYBOX_CROSS_COMPILER_PREFIX
+	string "Cross Compiler prefix"
+	default ""
+	help
+	  If you want to build BusyBox with a cross compiler, then you
+	  will need to set this to the cross-compiler prefix, for example,
+	  "i386-uclibc-".
+
+	  Note that CROSS_COMPILE environment variable or
+	  "make CROSS_COMPILE=xxx ..." will override this selection.
+
+	  Native builds leave this empty.
+
+endmenu
+
+menu 'Debugging Options'
+
+config BUSYBOX_DEBUG
+	bool "Build BusyBox with extra Debugging symbols"
+	default n
+	help
+	  Say Y here if you wish to examine BusyBox internals while applets are
+	  running. This increases the size of the binary considerably, and
+	  should only be used when doing development. If you are doing
+	  development and want to debug BusyBox, answer Y.
+
+	  Most people should answer N.
+
+config BUSYBOX_DEBUG_PESSIMIZE
+	bool "Disable compiler optimizations"
+	default n
+	depends on BUSYBOX_DEBUG
+	help
+	  The compiler's optimization of source code can eliminate and reorder
+	  code, resulting in an executable that's hard to understand when
+	  stepping through it with a debugger. This switches it off, resulting
+	  in a much bigger executable that more closely matches the source
+	  code.
+
+# triggers problems on cris with __attribute__((packed))
+#config BUSYBOX_WERROR
+#	bool "Abort compilation on any warning"
+#	default n
+#	help
+#	  Selecting this will add -Werror to gcc command line.
+#
+#	  Most people should answer N.
+
+choice
+	prompt "Additional debugging library"
+	default NO_DEBUG_LIB
+	help
+	  Using an additional debugging library will make BusyBox become
+	  considerable larger and will cause it to run more slowly. You
+	  should always leave this option disabled for production use.
+
+	  dmalloc support:
+	  ----------------
+	  This enables compiling with dmalloc ( http://dmalloc.com/ )
+	  which is an excellent public domain mem leak and malloc problem
+	  detector. To enable dmalloc, before running busybox you will
+	  want to properly set your environment, for example:
+	    export DMALLOC_OPTIONS=debug=0x34f47d83,inter=100,log=logfile
+	  The 'debug=' value is generated using the following command
+	    dmalloc -p log-stats -p log-non-free -p log-bad-space \
+	       -p log-elapsed-time -p check-fence -p check-heap \
+	       -p check-lists -p check-blank -p check-funcs -p realloc-copy \
+	       -p allow-free-null
+
+	  Electric-fence support:
+	  -----------------------
+	  This enables compiling with Electric-fence support. Electric
+	  fence is another very useful malloc debugging library which uses
+	  your computer's virtual memory hardware to detect illegal memory
+	  accesses. This support will make BusyBox be considerable larger
+	  and run slower, so you should leave this option disabled unless
+	  you are hunting a hard to find memory problem.
+
+
+config BUSYBOX_NO_DEBUG_LIB
+	bool "None"
+
+config BUSYBOX_DMALLOC
+	bool "Dmalloc"
+
+config BUSYBOX_EFENCE
+	bool "Electric-fence"
+
+endchoice
+
+config BUSYBOX_INCLUDE_SUSv2
+	bool "Enable obsolete features removed before SUSv3?"
+	default y
+	help
+	  This option will enable backwards compatibility with SuSv2,
+	  specifically, old-style numeric options ('command -1 <file>')
+	  will be supported in head, tail, and fold. (Note: should
+	  affect renice too.)
+
+### config PARSE
+### 	bool "Uniform config file parser debugging applet: parse"
+
+endmenu
+
+menu 'Installation Options'
+
+config BUSYBOX_INSTALL_NO_USR
+	bool "Don't use /usr"
+	default n
+	help
+	  Disable use of /usr. Don't activate this option if you don't know
+	  that you really want this behaviour.
+
+choice
+	prompt "Applets links"
+	default INSTALL_APPLET_SYMLINKS
+	help
+	  Choose how you install applets links.
+
+config BUSYBOX_INSTALL_APPLET_SYMLINKS
+	bool "as soft-links"
+	help
+	  Install applets as soft-links to the busybox binary. This needs some
+	  free inodes on the filesystem, but might help with filesystem
+	  generators that can't cope with hard-links.
+
+config BUSYBOX_INSTALL_APPLET_HARDLINKS
+	bool "as hard-links"
+	help
+	  Install applets as hard-links to the busybox binary. This might
+	  count on a filesystem with few inodes.
+
+config BUSYBOX_INSTALL_APPLET_SCRIPT_WRAPPERS
+	bool "as script wrappers"
+	help
+	  Install applets as script wrappers that call the busybox binary.
+
+config BUSYBOX_INSTALL_APPLET_DONT
+	bool "not installed"
+	depends on BUSYBOX_FEATURE_INSTALLER || BUSYBOX_FEATURE_SH_STANDALONE || BUSYBOX_FEATURE_PREFER_APPLETS
+	help
+	  Do not install applet links. Useful when using the -install feature
+	  or a standalone shell for rescue purposes.
+
+endchoice
+
+choice
+	prompt "/bin/sh applet link"
+	default INSTALL_SH_APPLET_SYMLINK
+	depends on BUSYBOX_INSTALL_APPLET_SCRIPT_WRAPPERS
+	help
+	  Choose how you install /bin/sh applet link.
+
+config BUSYBOX_INSTALL_SH_APPLET_SYMLINK
+	bool "as soft-link"
+	help
+	  Install /bin/sh applet as soft-link to the busybox binary.
+
+config BUSYBOX_INSTALL_SH_APPLET_HARDLINK
+	bool "as hard-link"
+	help
+	  Install /bin/sh applet as hard-link to the busybox binary.
+
+config BUSYBOX_INSTALL_SH_APPLET_SCRIPT_WRAPPER
+	bool "as script wrapper"
+	help
+	  Install /bin/sh applet as script wrapper that call the busybox
+	  binary.
+
+endchoice
+
+config BUSYBOX_PREFIX
+	string "BusyBox installation prefix"
+	default "@IDIR@"
+	help
+	  Define your directory to install BusyBox files/subdirs in.
+
+endmenu
+
+source package/busybox/config/libbb/Config.in
+
+endmenu
+
+comment "Applets"
+
+source package/busybox/config/archival/Config.in
+source package/busybox/config/coreutils/Config.in
+source package/busybox/config/console-tools/Config.in
+source package/busybox/config/debianutils/Config.in
+source package/busybox/config/editors/Config.in
+source package/busybox/config/findutils/Config.in
+source package/busybox/config/init/Config.in
+source package/busybox/config/loginutils/Config.in
+source package/busybox/config/e2fsprogs/Config.in
+source package/busybox/config/modutils/Config.in
+source package/busybox/config/util-linux/Config.in
+source package/busybox/config/miscutils/Config.in
+source package/busybox/config/networking/Config.in
+source package/busybox/config/printutils/Config.in
+source package/busybox/config/mailutils/Config.in
+source package/busybox/config/procps/Config.in
+source package/busybox/config/runit/Config.in
+source package/busybox/config/selinux/Config.in
+source package/busybox/config/shell/Config.in
+source package/busybox/config/sysklogd/Config.in
diff --git a/package/busybox/config/archival/Config.in b/package/busybox/config/archival/Config.in
new file mode 100644
index 000000000..0242dea05
--- /dev/null
+++ b/package/busybox/config/archival/Config.in
@@ -0,0 +1,300 @@
+#
+# For a description of the syntax of this configuration file,
+# see scripts/kbuild/config-language.txt.
+#
+
+menu "Archival Utilities"
+
+config BUSYBOX_FEATURE_SEAMLESS_LZMA
+	bool "Make tar, rpm, modprobe etc understand .lzma data"
+	default n
+	help
+	  Make tar, rpm, modprobe etc understand .lzma data.
+
+config BUSYBOX_FEATURE_SEAMLESS_BZ2
+	bool "Make tar, rpm, modprobe etc understand .bz2 data"
+	default n
+	help
+	  Make tar, rpm, modprobe etc understand .bz2 data.
+
+config BUSYBOX_FEATURE_SEAMLESS_GZ
+	bool "Make tar, rpm, modprobe etc understand .gz data"
+	default n
+	help
+	  Make tar, rpm, modprobe etc understand .gz data.
+
+config BUSYBOX_FEATURE_SEAMLESS_Z
+	bool "Make tar and gunzip understand .Z data"
+	default n
+	help
+	  Make tar and gunzip understand .Z data.
+
+config BUSYBOX_AR
+	bool "ar"
+	default n
+	help
+	  ar is an archival utility program used to create, modify, and
+	  extract contents from archives. An archive is a single file holding
+	  a collection of other files in a structure that makes it possible to
+	  retrieve the original individual files (called archive members).
+	  The original files' contents, mode (permissions), timestamp, owner,
+	  and group are preserved in the archive, and can be restored on
+	  extraction.
+
+	  The stored filename is limited to 15 characters. (for more information
+	  see long filename support).
+	  ar has 60 bytes of overheads for every stored file.
+
+	  This implementation of ar can extract archives, it cannot create or
+	  modify them.
+	  On an x86 system, the ar applet adds about 1K.
+
+	  Unless you have a specific application which requires ar, you should
+	  probably say N here.
+
+config BUSYBOX_FEATURE_AR_LONG_FILENAMES
+	bool "Support for long filenames (not need for debs)"
+	default n
+	depends on BUSYBOX_AR
+	help
+	  By default the ar format can only store the first 15 characters of
+	  the filename, this option removes that limitation.
+	  It supports the GNU ar long filename method which moves multiple long
+	  filenames into a the data section of a new ar entry.
+
+config BUSYBOX_BUNZIP2
+	bool "bunzip2"
+	default y
+	help
+	  bunzip2 is a compression utility using the Burrows-Wheeler block
+	  sorting text compression algorithm, and Huffman coding. Compression
+	  is generally considerably better than that achieved by more
+	  conventional LZ77/LZ78-based compressors, and approaches the
+	  performance of the PPM family of statistical compressors.
+
+	  Unless you have a specific application which requires bunzip2, you
+	  should probably say N here.
+
+config BUSYBOX_BZIP2
+	bool "bzip2"
+	default n
+	help
+	  bzip2 is a compression utility using the Burrows-Wheeler block
+	  sorting text compression algorithm, and Huffman coding. Compression
+	  is generally considerably better than that achieved by more
+	  conventional LZ77/LZ78-based compressors, and approaches the
+	  performance of the PPM family of statistical compressors.
+
+	  Unless you have a specific application which requires bzip2, you
+	  should probably say N here.
+
+config BUSYBOX_CPIO
+	bool "cpio"
+	default y
+	help
+	  cpio is an archival utility program used to create, modify, and
+	  extract contents from archives.
+	  cpio has 110 bytes of overheads for every stored file.
+
+	  This implementation of cpio can extract cpio archives created in the
+	  "newc" or "crc" format, it cannot create or modify them.
+
+	  Unless you have a specific application which requires cpio, you
+	  should probably say N here.
+
+config BUSYBOX_FEATURE_CPIO_O
+	bool "Support for archive creation"
+	default n
+	depends on BUSYBOX_CPIO
+	help
+	  This implementation of cpio can create cpio archives in the "newc"
+	  format only.
+
+config BUSYBOX_DPKG
+	bool "dpkg"
+	default n
+	select BUSYBOX_FEATURE_SEAMLESS_GZ
+	help
+	  dpkg is a medium-level tool to install, build, remove and manage
+	  Debian packages.
+
+	  This implementation of dpkg has a number of limitations,
+	  you should use the official dpkg if possible.
+
+config BUSYBOX_DPKG_DEB
+	bool "dpkg_deb"
+	default n
+	select BUSYBOX_FEATURE_SEAMLESS_GZ
+	help
+	  dpkg-deb unpacks and provides information about Debian archives.
+
+	  This implementation of dpkg-deb cannot pack archives.
+
+	  Unless you have a specific application which requires dpkg-deb,
+	  say N here.
+
+config BUSYBOX_FEATURE_DPKG_DEB_EXTRACT_ONLY
+	bool "Extract only (-x)"
+	default n
+	depends on BUSYBOX_DPKG_DEB
+	help
+	  This reduces dpkg-deb to the equivalent of
+	  "ar -p <deb> data.tar.gz | tar -zx". However it saves space as none
+	  of the extra dpkg-deb, ar or tar options are needed, they are linked
+	  to internally.
+
+config BUSYBOX_GUNZIP
+	bool "gunzip"
+	default y
+	help
+	  gunzip is used to decompress archives created by gzip.
+	  You can use the `-t' option to test the integrity of
+	  an archive, without decompressing it.
+
+config BUSYBOX_GZIP
+	bool "gzip"
+	default y
+	help
+	  gzip is used to compress files.
+	  It's probably the most widely used UNIX compression program.
+
+config BUSYBOX_IPKG
+	bool "ipkg"
+	default y
+	select BUSYBOX_MD5SUM
+	select BUSYBOX_WGET
+	help
+	  ipkg is the itsy package management system.
+
+config BUSYBOX_RPM2CPIO
+	bool "rpm2cpio"
+	default n
+	help
+	  Converts an RPM file into a CPIO archive.
+
+config BUSYBOX_RPM
+	bool "rpm"
+	default n
+	help
+	  Mini RPM applet - queries and extracts RPM packages.
+
+config BUSYBOX_TAR
+	bool "tar"
+	default y
+	help
+	  tar is an archiving program. It's commonly used with gzip to
+	  create compressed archives. It's probably the most widely used
+	  UNIX archive program.
+
+if TAR
+
+config BUSYBOX_FEATURE_TAR_CREATE
+	bool "Enable archive creation"
+	default y
+	depends on BUSYBOX_TAR
+	help
+	  If you enable this option you'll be able to create
+	  tar archives using the `-c' option.
+
+config BUSYBOX_FEATURE_TAR_AUTODETECT
+	bool "Autodetect gz/bz2 compressed tarballs"
+	default n
+	depends on BUSYBOX_FEATURE_SEAMLESS_Z || BUSYBOX_FEATURE_SEAMLESS_GZ || BUSYBOX_FEATURE_SEAMLESS_BZ2 || BUSYBOX_FEATURE_SEAMLESS_LZMA
+	help
+	  With this option tar can automatically detect gzip/bzip2 compressed
+	  tarballs. Currently it works only on files (not pipes etc).
+
+config BUSYBOX_FEATURE_TAR_FROM
+	bool "Enable -X (exclude from) and -T (include from) options)"
+	default y
+	depends on BUSYBOX_TAR
+	help
+	  If you enable this option you'll be able to specify
+	  a list of files to include or exclude from an archive.
+
+config BUSYBOX_FEATURE_TAR_OLDGNU_COMPATIBILITY
+	bool "Support for old tar header format"
+	default N
+	depends on BUSYBOX_TAR
+	help
+	  This option is required to unpack archives created in
+	  the old GNU format; help to kill this old format by
+	  repacking your ancient archives with the new format.
+
+config BUSYBOX_FEATURE_TAR_OLDSUN_COMPATIBILITY
+	bool "Enable untarring of tarballs with checksums produced by buggy Sun tar"
+	default N
+	depends on BUSYBOX_TAR
+	help
+	  This option is required to unpack archives created by some old
+	  version of Sun's tar (it was calculating checksum using signed
+	  arithmetic). It is said to be fixed in newer Sun tar, but "old"
+	  tarballs still exist.
+
+config BUSYBOX_FEATURE_TAR_GNU_EXTENSIONS
+	bool "Support for GNU tar extensions (long filenames)"
+	default y
+	depends on BUSYBOX_TAR
+	help
+	  With this option busybox supports GNU long filenames and
+	  linknames.
+
+config BUSYBOX_FEATURE_TAR_LONG_OPTIONS
+	bool "Enable long options"
+	default n
+	depends on BUSYBOX_TAR && BUSYBOX_GETOPT_LONG
+	help
+	  Enable use of long options, increases size by about 400 Bytes
+
+config BUSYBOX_FEATURE_TAR_UNAME_GNAME
+	bool "Enable use of user and group names"
+	default n
+	depends on B