summaryrefslogtreecommitdiff
path: root/package/busybox/config/networking/Config.in
diff options
context:
space:
mode:
Diffstat (limited to 'package/busybox/config/networking/Config.in')
-rw-r--r--package/busybox/config/networking/Config.in921
1 files changed, 921 insertions, 0 deletions
diff --git a/package/busybox/config/networking/Config.in b/package/busybox/config/networking/Config.in
new file mode 100644
index 000000000..3bd3e1e8f
--- /dev/null
+++ b/package/busybox/config/networking/Config.in
@@ -0,0 +1,921 @@
+#
+# For a description of the syntax of this configuration file,
+# see scripts/kbuild/config-language.txt.
+#
+
+menu "Networking Utilities"
+
+config BUSYBOX_FEATURE_IPV6
+ bool "Enable IPv6 support"
+ default n
+ help
+ Enable IPv6 support in busybox.
+ This adds IPv6 support in the networking applets.
+
+config BUSYBOX_FEATURE_PREFER_IPV4_ADDRESS
+ bool "Preferentially use IPv4 addresses from DNS queries"
+ default y
+ depends on BUSYBOX_FEATURE_IPV6
+ help
+ Use IPv4 address of network host if it has one.
+
+ If this option is off, the first returned address will be used.
+ This may cause problems when your DNS server is IPv6-capable and
+ is returning IPv6 host addresses too. If IPv6 address
+ precedes IPv4 one in DNS reply, busybox network applets
+ (e.g. wget) will use IPv6 address. On an IPv6-incapable host
+ or network applets will fail to connect to the host
+ using IPv6 address.
+
+config BUSYBOX_VERBOSE_RESOLUTION_ERRORS
+ bool "Verbose resolution errors"
+ default n
+ help
+ Enable if you are not satisfied with simplistic
+ "can't resolve 'hostname.com'" and want to know more.
+ This may increase size of your executable a bit.
+
+config BUSYBOX_ARP
+ bool "arp"
+ default y
+ help
+ Manipulate the system ARP cache.
+
+config BUSYBOX_ARPING
+ bool "arping"
+ default y
+ help
+ Ping hosts by ARP packets.
+
+config BUSYBOX_BRCTL
+ bool "brctl"
+ default n
+ help
+ Manage ethernet bridges.
+ Supports addbr/delbr and addif/delif.
+
+config BUSYBOX_FEATURE_BRCTL_FANCY
+ bool "Fancy options"
+ default n
+ depends on BUSYBOX_BRCTL
+ help
+ Add support for extended option like:
+ setageing, setfd, sethello, setmaxage,
+ setpathcost, setportprio, setbridgeprio,
+ stp
+ This adds about 600 bytes.
+
+config BUSYBOX_FEATURE_BRCTL_SHOW
+ bool "Support show, showmac and showstp"
+ default n
+ depends on BUSYBOX_BRCTL && BUSYBOX_FEATURE_BRCTL_FANCY
+ help
+ Add support for option which prints the current config:
+ showmacs, showstp, show
+
+config BUSYBOX_DNSD
+ bool "dnsd"
+ default n
+ help
+ Small and static DNS server daemon.
+
+config BUSYBOX_ETHER_WAKE
+ bool "ether-wake"
+ default n
+ help
+ Send a magic packet to wake up sleeping machines.
+
+config BUSYBOX_FAKEIDENTD
+ bool "fakeidentd"
+ default n
+ select BUSYBOX_FEATURE_SYSLOG
+ help
+ fakeidentd listens on the ident port and returns a predefined
+ fake value on any query.
+
+config BUSYBOX_FTPGET
+ bool "ftpget"
+ default n
+ help
+ Retrieve a remote file via FTP.
+
+config BUSYBOX_FTPPUT
+ bool "ftpput"
+ default n
+ help
+ Store a remote file via FTP.
+
+config BUSYBOX_FEATURE_FTPGETPUT_LONG_OPTIONS
+ bool "Enable long options in ftpget/ftpput"
+ default n
+ depends on BUSYBOX_GETOPT_LONG && (BUSYBOX_FTPGET || BUSYBOX_FTPPUT)
+ help
+ Support long options for the ftpget/ftpput applet.
+
+config BUSYBOX_HOSTNAME
+ bool "hostname"
+ default y
+ help
+ Show or set the system's host name.
+
+config BUSYBOX_HTTPD
+ bool "httpd"
+ default n
+ help
+ Serve web pages via an HTTP server.
+
+config BUSYBOX_FEATURE_HTTPD_RANGES
+ bool "Support 'Ranges:' header"
+ default n
+ depends on BUSYBOX_HTTPD
+ help
+ Makes httpd emit "Accept-Ranges: bytes" header and understand
+ "Range: bytes=NNN-[MMM]" header. Allows for resuming interrupted
+ downloads, seeking in multimedia players etc.
+
+config BUSYBOX_FEATURE_HTTPD_USE_SENDFILE
+ bool "Use sendfile system call"
+ default n
+ depends on BUSYBOX_HTTPD
+ help
+ When enabled, httpd will use the kernel sendfile() function
+ instead of read/write loop.
+
+config BUSYBOX_FEATURE_HTTPD_RELOAD_CONFIG_SIGHUP
+ bool "Support reloading of global config file on HUP signal"
+ default n
+ depends on BUSYBOX_HTTPD
+ help
+ This option enables processing of SIGHUP to reload cached
+ configuration settings.
+
+config BUSYBOX_FEATURE_HTTPD_SETUID
+ bool "Enable -u <user> option"
+ default n
+ depends on BUSYBOX_HTTPD
+ help
+ This option allows the server to run as a specific user
+ rather than defaulting to the user that starts the server.
+ Use of this option requires special privileges to change to a
+ different user.
+
+config BUSYBOX_FEATURE_HTTPD_BASIC_AUTH
+ bool "Enable Basic http Authentication"
+ default y
+ depends on BUSYBOX_HTTPD
+ help
+ Utilizes password settings from /etc/httpd.conf for basic
+ authentication on a per url basis.
+
+config BUSYBOX_FEATURE_HTTPD_AUTH_MD5
+ bool "Support MD5 crypted passwords for http Authentication"
+ default n
+ depends on BUSYBOX_FEATURE_HTTPD_BASIC_AUTH
+ help
+ Enables basic per URL authentication from /etc/httpd.conf
+ using md5 passwords.
+
+config BUSYBOX_FEATURE_HTTPD_CONFIG_WITH_MIME_TYPES
+ bool "Support loading additional MIME types at run-time"
+ default n
+ depends on BUSYBOX_HTTPD
+ help
+ This option enables support for additional MIME types at
+ run-time to be specified in the configuration file.
+
+config BUSYBOX_FEATURE_HTTPD_CGI
+ bool "Support Common Gateway Interface (CGI)"
+ default y
+ depends on BUSYBOX_HTTPD
+ help
+ This option allows scripts and executables to be invoked
+ when specific URLs are requested.
+
+config BUSYBOX_FEATURE_HTTPD_CONFIG_WITH_SCRIPT_INTERPR
+ bool "Support for running scripts through an interpreter"
+ default n
+ depends on BUSYBOX_FEATURE_HTTPD_CGI
+ help
+ This option enables support for running scripts through an
+ interpreter. Turn this on if you want PHP scripts to work
+ properly. You need to supply an additional line in your httpd
+ config file:
+ *.php:/path/to/your/php
+
+config BUSYBOX_FEATURE_HTTPD_SET_REMOTE_PORT_TO_ENV
+ bool "Set REMOTE_PORT environment variable for CGI"
+ default n
+ depends on BUSYBOX_FEATURE_HTTPD_CGI
+ help
+ Use of this option can assist scripts in generating
+ references that contain a unique port number.
+
+config BUSYBOX_FEATURE_HTTPD_ENCODE_URL_STR
+ bool "Enable -e option (useful for CGIs written as shell scripts)"
+ default y
+ depends on BUSYBOX_HTTPD
+ help
+ This option allows html encoding of arbitrary strings for display
+ by the browser. Output goes to stdout.
+ For example, httpd -e "<Hello World>" produces
+ "&#60Hello&#32World&#62".
+
+config BUSYBOX_FEATURE_HTTPD_ERROR_PAGES
+ bool "Support for custom error pages"
+ default n
+ depends on BUSYBOX_HTTPD
+ help
+ This option allows you to define custom error pages in
+ the configuration file instead of the default HTTP status
+ error pages. For instance, if you add the line:
+ E404:/path/e404.html
+ in the config file, the server will respond the specified
+ '/path/e404.html' file instead of the terse '404 NOT FOUND'
+ message.
+
+config BUSYBOX_FEATURE_HTTPD_PROXY
+ bool "Support for reverse proxy"
+ default n
+ depends on BUSYBOX_HTTPD
+ help
+ This option allows you to define URLs that will be forwarded
+ to another HTTP server. To setup add the following line to the
+ configuration file
+ P:/url/:http://hostname[:port]/new/path/
+ Then a request to /url/myfile will be forwarded to
+ http://hostname[:port]/new/path/myfile.
+
+config BUSYBOX_IFCONFIG
+ bool "ifconfig"
+ default y
+ help
+ Ifconfig is used to configure the kernel-resident network interfaces.
+
+config BUSYBOX_FEATURE_IFCONFIG_STATUS
+ bool "Enable status reporting output (+7k)"
+ default y
+ depends on BUSYBOX_IFCONFIG
+ help
+ If ifconfig is called with no arguments it will display the status
+ of the currently active interfaces.
+
+config BUSYBOX_FEATURE_IFCONFIG_SLIP
+ bool "Enable slip-specific options \"keepalive\" and \"outfill\""
+ default n
+ depends on BUSYBOX_IFCONFIG
+ help
+ Allow "keepalive" and "outfill" support for SLIP. If you're not
+ planning on using serial lines, leave this unchecked.
+
+config BUSYBOX_FEATURE_IFCONFIG_MEMSTART_IOADDR_IRQ
+ bool "Enable options \"mem_start\", \"io_addr\", and \"irq\""
+ default n
+ depends on BUSYBOX_IFCONFIG
+ help
+ Allow the start address for shared memory, start address for I/O,
+ and/or the interrupt line used by the specified device.
+
+config BUSYBOX_FEATURE_IFCONFIG_HW
+ bool "Enable option \"hw\" (ether only)"
+ default y
+ depends on BUSYBOX_IFCONFIG
+ help
+ Set the hardware address of this interface, if the device driver
+ supports this operation. Currently, we only support the 'ether'
+ class.
+
+config BUSYBOX_FEATURE_IFCONFIG_BROADCAST_PLUS
+ bool "Set the broadcast automatically"
+ default y
+ depends on BUSYBOX_IFCONFIG
+ help
+ Setting this will make ifconfig attempt to find the broadcast
+ automatically if the value '+' is used.
+
+config BUSYBOX_IFENSLAVE
+ bool "ifenslave"
+ default n
+ help
+ Userspace application to bind several interfaces
+ to a logical interface (use with kernel bonding driver).
+
+config BUSYBOX_IFUPDOWN
+ bool "ifupdown"
+ default y
+ help
+ Activate or deactivate the specified interfaces. This applet makes
+ use of either "ifconfig" and "route" or the "ip" command to actually
+ configure network interfaces. Therefore, you will probably also want
+ to enable either IFCONFIG and ROUTE, or enable
+ FEATURE_IFUPDOWN_IP and the various IP options. Of
+ course you could use non-busybox versions of these programs, so
+ against my better judgement (since this will surely result in plenty
+ of support questions on the mailing list), I do not force you to
+ enable these additional options. It is up to you to supply either
+ "ifconfig", "route" and "run-parts" or the "ip" command, either
+ via busybox or via standalone utilities.
+
+config BUSYBOX_IFUPDOWN_IFSTATE_PATH
+ string "Absolute path to ifstate file"
+ default "/var/run/ifstate"
+ depends on BUSYBOX_IFUPDOWN
+ help
+ ifupdown keeps state information in a file called ifstate.
+ Typically it is located in /var/run/ifstate, however
+ some distributions tend to put it in other places
+ (debian, for example, uses /etc/network/run/ifstate).
+ This config option defines location of ifstate.
+
+config BUSYBOX_FEATURE_IFUPDOWN_IP
+ bool "Use ip applet"
+ default y
+ depends on BUSYBOX_IFUPDOWN
+ help
+ Use the iproute "ip" command to implement "ifup" and "ifdown", rather
+ than the default of using the older 'ifconfig' and 'route' utilities.
+
+config BUSYBOX_FEATURE_IFUPDOWN_IP_BUILTIN
+ bool "Use busybox ip applet"
+ default y
+ depends on BUSYBOX_FEATURE_IFUPDOWN_IP
+ select BUSYBOX_IP
+ select BUSYBOX_FEATURE_IP_ADDRESS
+ select BUSYBOX_FEATURE_IP_LINK
+ select BUSYBOX_FEATURE_IP_ROUTE
+ help
+ Use the busybox iproute "ip" applet to implement "ifupdown".
+
+ If left disabled, you must install the full-blown iproute2
+ utility or the "ifup" and "ifdown" applets will not work.
+
+config BUSYBOX_FEATURE_IFUPDOWN_IFCONFIG_BUILTIN
+ bool "Use busybox ifconfig and route applets"
+ default n
+ depends on BUSYBOX_IFUPDOWN && !BUSYBOX_FEATURE_IFUPDOWN_IP
+ select BUSYBOX_IFCONFIG
+ select BUSYBOX_ROUTE
+ help
+ Use the busybox iproute "ifconfig" and "route" applets to
+ implement the "ifup" and "ifdown" utilities.
+
+ If left disabled, you must install the full-blown ifconfig
+ and route utilities, or the "ifup" and "ifdown" applets will not
+ work.
+
+config BUSYBOX_FEATURE_IFUPDOWN_IPV4
+ bool "Support for IPv4"
+ default y
+ depends on BUSYBOX_IFUPDOWN
+ help
+ If you want ifup/ifdown to talk IPv4, leave this on.
+
+config BUSYBOX_FEATURE_IFUPDOWN_IPV6
+ bool "Support for IPv6"
+ default n
+ depends on BUSYBOX_IFUPDOWN && BUSYBOX_FEATURE_IPV6
+ help
+ If you need support for IPv6, turn this option on.
+
+### UNUSED
+###config FEATURE_IFUPDOWN_IPX
+### bool "Support for IPX"
+### default n
+### depends on BUSYBOX_IFUPDOWN
+### help
+### If this option is selected you can use busybox to work with IPX
+### networks.
+
+config BUSYBOX_FEATURE_IFUPDOWN_MAPPING
+ bool "Enable mapping support"
+ default n
+ depends on BUSYBOX_IFUPDOWN
+ help
+ This enables support for the "mapping" stanza, unless you have
+ a weird network setup you don't need it.
+
+config BUSYBOX_FEATURE_IFUPDOWN_EXTERNAL_DHCP
+ bool "Support for external dhcp clients"
+ default n
+ depends on BUSYBOX_IFUPDOWN
+ help
+ This enables support for the external dhcp clients. Clients are
+ tried in the following order: dhcpcd, dhclient, pump and udhcpc.
+ Otherwise, if udhcpc applet is enabled, it is used.
+ Otherwise, ifup/ifdown will have no support for DHCP.
+
+config BUSYBOX_INETD
+ bool "inetd"
+ default n
+ select BUSYBOX_FEATURE_SYSLOG
+ help
+ Internet superserver daemon
+
+config BUSYBOX_FEATURE_INETD_SUPPORT_BUILTIN_ECHO
+ bool "Support echo service"
+ default y
+ depends on BUSYBOX_INETD
+ help
+ Echo received data internal inetd service
+
+config BUSYBOX_FEATURE_INETD_SUPPORT_BUILTIN_DISCARD
+ bool "Support discard service"
+ default y
+ depends on BUSYBOX_INETD
+ help
+ Internet /dev/null internal inetd service
+
+config BUSYBOX_FEATURE_INETD_SUPPORT_BUILTIN_TIME
+ bool "Support time service"
+ default y
+ depends on BUSYBOX_INETD
+ help
+ Return 32 bit time since 1900 internal inetd service
+
+config BUSYBOX_FEATURE_INETD_SUPPORT_BUILTIN_DAYTIME
+ bool "Support daytime service"
+ default y
+ depends on BUSYBOX_INETD
+ help
+ Return human-readable time internal inetd service
+
+config BUSYBOX_FEATURE_INETD_SUPPORT_BUILTIN_CHARGEN
+ bool "Support chargen service"
+ default y
+ depends on BUSYBOX_INETD
+ help
+ Familiar character generator internal inetd service
+
+config BUSYBOX_FEATURE_INETD_RPC
+ bool "Support RPC services"
+ default n
+ depends on BUSYBOX_INETD
+ select BUSYBOX_FEATURE_HAVE_RPC
+ help
+ Support Sun-RPC based services
+
+config BUSYBOX_IP
+ bool "ip"
+ default y
+ help
+ The "ip" applet is a TCP/IP interface configuration and routing
+ utility. You generally don't need "ip" to use busybox with
+ TCP/IP.
+
+config BUSYBOX_FEATURE_IP_ADDRESS
+ bool "ip address"
+ default y
+ depends on BUSYBOX_IP
+ help
+ Address manipulation support for the "ip" applet.
+
+config BUSYBOX_FEATURE_IP_LINK
+ bool "ip link"
+ default y
+ depends on BUSYBOX_IP
+ help
+ Configure network devices with "ip".
+
+config BUSYBOX_FEATURE_IP_ROUTE
+ bool "ip route"
+ default y
+ depends on BUSYBOX_IP
+ help
+ Add support for routing table management to "ip".
+
+config BUSYBOX_FEATURE_IP_TUNNEL
+ bool "ip tunnel"
+ default n
+ depends on BUSYBOX_IP
+ help
+ Add support for tunneling commands to "ip".
+
+config BUSYBOX_FEATURE_IP_RULE
+ bool "ip rule"
+ default n
+ depends on BUSYBOX_IP
+ help
+ Add support for rule commands to "ip".
+
+config BUSYBOX_FEATURE_IP_SHORT_FORMS
+ bool "Support short forms of ip commands"
+ default n
+ depends on BUSYBOX_IP
+ help
+ Also support short-form of ip <OBJECT> commands:
+ ip addr -> ipaddr
+ ip link -> iplink
+ ip route -> iproute
+ ip tunnel -> iptunnel
+ ip rule -> iprule
+
+ Say N unless you desparately need the short form of the ip
+ object commands.
+
+config BUSYBOX_FEATURE_IP_RARE_PROTOCOLS
+ bool "Support displaying rarely used link types"
+ default n
+ depends on BUSYBOX_IP
+ help
+ If you are not going to use links of type "frad", "econet",
+ "bif" etc, you probably don't need to enable this.
+ Ethernet, wireless, infrared, ppp/slip, ip tunnelling
+ link types are supported without this option selected.
+
+config BUSYBOX_IPADDR
+ bool
+ default y
+ depends on BUSYBOX_FEATURE_IP_SHORT_FORMS && BUSYBOX_FEATURE_IP_ADDRESS
+
+config BUSYBOX_IPLINK
+ bool
+ default y
+ depends on BUSYBOX_FEATURE_IP_SHORT_FORMS && BUSYBOX_FEATURE_IP_LINK
+
+config BUSYBOX_IPROUTE
+ bool
+ default y
+ depends on BUSYBOX_FEATURE_IP_SHORT_FORMS && BUSYBOX_FEATURE_IP_ROUTE
+
+config BUSYBOX_IPTUNNEL
+ bool
+ default y
+ depends on BUSYBOX_FEATURE_IP_SHORT_FORMS && BUSYBOX_FEATURE_IP_TUNNEL
+
+config BUSYBOX_IPRULE
+ bool
+ default y
+ depends on BUSYBOX_FEATURE_IP_SHORT_FORMS && BUSYBOX_FEATURE_IP_RULE
+
+config BUSYBOX_IPCALC
+ bool "ipcalc"
+ default n
+ help
+ ipcalc takes an IP address and netmask and calculates the
+ resulting broadcast, network, and host range.
+
+config BUSYBOX_FEATURE_IPCALC_FANCY
+ bool "Fancy IPCALC, more options, adds 1 kbyte"
+ default y
+ depends on BUSYBOX_IPCALC
+ help
+ Adds the options hostname, prefix and silent to the output of
+ "ipcalc".
+
+config BUSYBOX_FEATURE_IPCALC_LONG_OPTIONS
+ bool "Enable long options"
+ default n
+ depends on BUSYBOX_IPCALC && BUSYBOX_GETOPT_LONG
+ help
+ Support long options for the ipcalc applet.
+
+config BUSYBOX_NAMEIF
+ bool "nameif"
+ default n
+ select BUSYBOX_FEATURE_SYSLOG
+ help
+ nameif is used to rename network interface by its MAC address.
+ Renamed interfaces MUST be in the down state.
+ It is possible to use a file (default: /etc/mactab)
+ with list of new interface names and MACs.
+ Maximum interface name length: IFNAMSIZ = 16
+ File fields are separated by space or tab.
+ File format:
+ # Comment
+ new_interface_name XX:XX:XX:XX:XX:XX
+
+config BUSYBOX_FEATURE_NAMEIF_EXTENDED
+ bool "Extended nameif"
+ default n
+ depends on BUSYBOX_NAMEIF
+ help
+ This extends the nameif syntax to support the bus_info and driver
+ checks. The syntax is compatible to the normal nameif.
+ File format:
+ new_interface_name driver=asix bus=usb-0000:00:08.2-3
+ new_interface_name bus=usb-0000:00:08.2-3 00:80:C8:38:91:B5
+ new_interface_name mac=00:80:C8:38:91:B5
+ new_interface_name 00:80:C8:38:91:B5
+
+config BUSYBOX_NC
+ bool "nc"
+ default y
+ help
+ A simple Unix utility which reads and writes data across network
+ connections.
+
+config BUSYBOX_NC_SERVER
+ bool "Netcat server options (-l)"
+ default y
+ depends on BUSYBOX_NC
+ help
+ Allow netcat to act as a server.
+
+config BUSYBOX_NC_EXTRA
+ bool "Netcat extensions (-eiw and filename)"
+ default n
+ depends on BUSYBOX_NC
+ help
+ Add -e (support for executing the rest of the command line after
+ making or receiving a successful connection), -i (delay interval for
+ lines sent), -w (timeout for initial connection).
+
+config BUSYBOX_NETSTAT
+ bool "netstat"
+ default y
+ help
+ netstat prints information about the Linux networking subsystem.
+
+config BUSYBOX_FEATURE_NETSTAT_WIDE
+ bool "Enable wide netstat output"
+ default n
+ depends on BUSYBOX_NETSTAT
+ help
+ Add support for wide columns. Useful when displaying IPv6 addresses
+ (-W option).
+
+config BUSYBOX_FEATURE_NETSTAT_PRG
+ bool "Enable PID/Program name output"
+ default y
+ depends on BUSYBOX_NETSTAT
+ help
+ Add support for -p flag to print out PID and program name.
+ +700 bytes of code.
+
+config BUSYBOX_NSLOOKUP
+ bool "nslookup"
+ default y
+ help
+ nslookup is a tool to query Internet name servers.
+
+config BUSYBOX_PING
+ bool "ping"
+ default y
+ help
+ ping uses the ICMP protocol's mandatory ECHO_REQUEST datagram to
+ elicit an ICMP ECHO_RESPONSE from a host or gateway.
+
+config BUSYBOX_PING6
+ bool "ping6"
+ default n
+ depends on BUSYBOX_FEATURE_IPV6 && BUSYBOX_PING
+ help
+ This will give you a ping that can talk IPv6.
+
+config BUSYBOX_FEATURE_FANCY_PING
+ bool "Enable fancy ping output"
+ default y
+ depends on BUSYBOX_PING
+ help
+ Make the output from the ping applet include statistics, and at the
+ same time provide full support for ICMP packets.
+
+config BUSYBOX_PSCAN
+ bool "pscan"
+ default n
+ help
+ Simple network port scanner.
+
+config BUSYBOX_ROUTE
+ bool "route"
+ default y
+ help
+ Route displays or manipulates the kernel's IP routing tables.
+
+config BUSYBOX_SLATTACH
+ bool "slattach"
+ default n
+ help
+ slattach is a small utility to attach network interfaces to serial
+ lines.
+
+#config TC
+# bool "tc"
+# default n
+# help
+# show / manipulate traffic control settings
+#
+#config FEATURE_TC_INGRESS
+# def_bool n
+# depends on BUSYBOX_TC
+
+config BUSYBOX_TELNET
+ bool "telnet"
+ default y
+ help
+ Telnet is an interface to the TELNET protocol, but is also commonly
+ used to test other simple protocols.
+
+config BUSYBOX_FEATURE_TELNET_TTYPE
+ bool "Pass TERM type to remote host"
+ default y
+ depends on BUSYBOX_TELNET
+ help
+ Setting this option will forward the TERM environment variable to the
+ remote host you are connecting to. This is useful to make sure that
+ things like ANSI colors and other control sequences behave.
+
+config BUSYBOX_FEATURE_TELNET_AUTOLOGIN
+ bool "Pass USER type to remote host"
+ default y
+ depends on BUSYBOX_TELNET
+ help
+ Setting this option will forward the USER environment variable to the
+ remote host you are connecting to. This is useful when you need to
+ log into a machine without telling the username (autologin). This
+ option enables `-a' and `-l USER' arguments.
+
+config BUSYBOX_TELNETD
+ bool "telnetd"
+ default n
+ select BUSYBOX_FEATURE_SYSLOG
+ help
+ A daemon for the TELNET protocol, allowing you to log onto the host
+ running the daemon. Please keep in mind that the TELNET protocol
+ sends passwords in plain text. If you can't afford the space for an
+ SSH daemon and you trust your network, you may say 'y' here. As a
+ more secure alternative, you should seriously consider installing the
+ very small Dropbear SSH daemon instead:
+ http://matt.ucc.asn.au/dropbear/dropbear.html
+
+ Note that for busybox telnetd to work you need several things:
+ First of all, your kernel needs:
+ UNIX98_PTYS=y
+ DEVPTS_FS=y
+
+ Next, you need a /dev/pts directory on your root filesystem:
+
+ $ ls -ld /dev/pts
+ drwxr-xr-x 2 root root 0 Sep 23 13:21 /dev/pts/
+
+ Next you need the pseudo terminal master multiplexer /dev/ptmx:
+
+ $ ls -la /dev/ptmx
+ crw-rw-rw- 1 root tty 5, 2 Sep 23 13:55 /dev/ptmx
+
+ Any /dev/ttyp[0-9]* files you may have can be removed.
+ Next, you need to mount the devpts filesystem on /dev/pts using:
+
+ mount -t devpts devpts /dev/pts
+
+ You need to be sure that Busybox has LOGIN and
+ FEATURE_SUID enabled. And finally, you should make
+ certain that Busybox has been installed setuid root:
+
+ chown root.root /bin/busybox
+ chmod 4755 /bin/busybox
+
+ with all that done, telnetd _should_ work....
+
+
+config BUSYBOX_FEATURE_TELNETD_STANDALONE
+ bool "Support standalone telnetd (not inetd only)"
+ default n
+ depends on BUSYBOX_TELNETD
+ help
+ Selecting this will make telnetd able to run standalone.
+
+config BUSYBOX_TFTP
+ bool "tftp"
+ default n
+ help
+ This enables the Trivial File Transfer Protocol client program. TFTP
+ is usually used for simple, small transfers such as a root image
+ for a network-enabled bootloader.
+
+config BUSYBOX_TFTPD
+ bool "tftpd"
+ default n
+ help
+ This enables the Trivial File Transfer Protocol server program.
+ It expects that stdin is a datagram socket and a packet
+ is already pending on it. It will exit after one transfer.
+ In other words: it should be run from inetd in nowait mode,
+ or from udpsvd. Example: "udpsvd -E 0 69 tftpd DIR"
+
+config BUSYBOX_FEATURE_TFTP_GET
+ bool "Enable \"get\" command"
+ default y
+ depends on BUSYBOX_TFTP || BUSYBOX_TFTPD
+ help
+ Add support for the GET command within the TFTP client. This allows
+ a client to retrieve a file from a TFTP server.
+ Also enable upload support in tftpd, if tftpd is selected.
+
+config BUSYBOX_FEATURE_TFTP_PUT
+ bool "Enable \"put\" command"
+ default y
+ depends on BUSYBOX_TFTP || BUSYBOX_TFTPD
+ help
+ Add support for the PUT command within the TFTP client. This allows
+ a client to transfer a file to a TFTP server.
+ Also enable download support in tftpd, if tftpd is selected.
+
+config BUSYBOX_FEATURE_TFTP_BLOCKSIZE
+ bool "Enable \"blksize\" protocol option"
+ default n
+ depends on BUSYBOX_TFTP || BUSYBOX_TFTPD
+ help
+ Allow tftp to specify block size, and tftpd to understand
+ "blksize" option.
+
+config BUSYBOX_TFTP_DEBUG
+ bool "Enable debug"
+ default n
+ depends on BUSYBOX_TFTP
+ help
+ Enable debug settings for tftp. This is useful if you're running
+ into problems with tftp as the protocol doesn't help you much when
+ you run into problems.
+
+config BUSYBOX_TRACEROUTE
+ bool "traceroute"
+ default y
+ help
+ Utility to trace the route of IP packets
+
+config BUSYBOX_FEATURE_TRACEROUTE_VERBOSE
+ bool "Enable verbose output"
+ default y
+ depends on BUSYBOX_TRACEROUTE
+ help
+ Add some verbosity to traceroute. This includes amongst other things
+ hostnames and ICMP response types.
+
+config BUSYBOX_FEATURE_TRACEROUTE_SOURCE_ROUTE
+ bool "Enable loose source route"
+ default n
+ depends on BUSYBOX_TRACEROUTE
+ help
+ Add option to specify a loose source route gateway
+ (8 maximum).
+
+config BUSYBOX_FEATURE_TRACEROUTE_USE_ICMP
+ bool "Use ICMP instead of UDP"
+ default y
+ depends on BUSYBOX_TRACEROUTE
+ help
+ Add feature to allow for ICMP ECHO instead of UDP datagrams.
+
+source package/busybox/config/networking/udhcp/Config.in
+
+config BUSYBOX_VCONFIG
+ bool "vconfig"
+ default n
+ help
+ Creates, removes, and configures VLAN interfaces
+
+config BUSYBOX_WGET
+ bool "wget"
+ default y
+ help
+ wget is a utility for non-interactive download of files from HTTP,
+ HTTPS, and FTP servers.
+
+config BUSYBOX_FEATURE_WGET_STATUSBAR
+ bool "Enable a nifty process meter (+2k)"
+ default n
+ depends on BUSYBOX_WGET
+ help
+ Enable the transfer progress bar for wget transfers.
+
+config BUSYBOX_FEATURE_WGET_AUTHENTICATION
+ bool "Enable HTTP authentication"
+ default y
+ depends on BUSYBOX_WGET
+ help
+ Support authenticated HTTP transfers.
+
+config BUSYBOX_FEATURE_WGET_LONG_OPTIONS
+ bool "Enable long options"
+ default n
+ depends on BUSYBOX_WGET && BUSYBOX_GETOPT_LONG
+ help
+ Support long options for the wget applet.
+
+config BUSYBOX_ZCIP
+ bool "zcip"
+ default n
+ select BUSYBOX_FEATURE_SYSLOG
+ help
+ ZCIP provides ZeroConf IPv4 address selection, according to RFC 3927.
+ It's a daemon that allocates and defends a dynamically assigned
+ address on the 169.254/16 network, requiring no system administrator.
+
+ See http://www.zeroconf.org for further details, and "zcip.script"
+ in the busybox examples.
+
+config BUSYBOX_TCPSVD
+ bool "tcpsvd"
+ default n
+ help
+ tcpsvd listens on a TCP port and runs a program for each new
+ connection.
+
+config BUSYBOX_UDPSVD
+ bool "udpsvd"
+ default n
+ help
+ udpsvd listens on an UDP port and runs a program for each new
+ connection.
+
+endmenu