summaryrefslogtreecommitdiff
path: root/test
AgeCommit message (Collapse)Author
2012-01-29handle signal-OBXSI.SUSv4.symsBernhard Reutner-Fischer
A couple of sig functions are obsolete in SUSv4. Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
2012-01-29test: ignore undefined symbols for APIBernhard Reutner-Fischer
Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
2012-01-18tests: only test crypt if we have an implBernhard Reutner-Fischer
Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
2012-01-18tests: add sha356/512 testsBernhard Reutner-Fischer
Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
2012-01-18tests: silence warnings in cryptBernhard Reutner-Fischer
Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
2012-01-17tests: mark all helper scripts +xMike Frysinger
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2012-01-16tests: tst-futimens1: add missing mode args to open()Mike Frysinger
Since we use O_CREAT with open(), need to make sure to pass in mode too. Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2012-01-16tests: test-canon: include sys/stat.h for mkdir()Mike Frysinger
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2012-01-16tests: fdopen: add missing mode args to open()Mike Frysinger
We call open() with O_CREAT, so make sure we pass in the mode else we might get build errors with fortify source. Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2012-01-16tests: opendir-tst1: add header for mknod()Mike Frysinger
Include sys/stat.h for mknod() prototype. Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2012-01-16tests: mmap2: ignore permission denied errors on /dev/memMike Frysinger
Non-root users can't open /dev/mem, so it makes it hard to pass. Ignore that case. Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2012-01-15tests: skip redundant -Wstrict-prototypes setupMike Frysinger
We inherit the top-level Rules.mak which sets up this flag for us, so just rely on that. Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2012-01-14buildsys: cache build flags in varsMike Frysinger
Running `make clean` atm takes like 20 seconds because every subdir re-evaluates all the toolchain flags. Add some helpers to automate the process of setting up variables to cache the result of tests, as well as the checking of an already set flag. Now `make clean` takes like 2 seconds on my system. Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-10-01tests: ignore new inet testMike Frysinger
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-10-01tests: add fallback for mktemp()Mike Frysinger
If SuSv3 legacy support is disabled, then mktemp() isn't available, and we end up getting a lot of build errors. So add a fallback built on top of tempnam() since that currently cannot be disabled. Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-05-03test_nptl: fix expected result for tst-cputimer[123]Filippo Arcidiacono
Signed-off-by: Filippo Arcidiacono <filippo.arcidiacono@st.com> Signed-off-by: Carmelo Amoroso <carmelo.amoroso@st.com>
2011-05-02test_nptl: fix expected result for tst-clock2 testFilippo Arcidiacono
tst-clock2 should return 0 when _SC_THREAD_CPUTIME option isn't available, instead of treating it as an error. Further set the expected ret value as 0 avoiding to hide any real failures in case of THREAD_CPUTIME feature available. Signed-off-by: Filippo Arcidiacono <filippo.arcidiacono@st.com> Signed-off-by: Carmelo Amoroso <carmelo.amoroso@st.com>
2011-05-01tests: disable ether tests if !HAS_SOCKETBernhard Reutner-Fischer
Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
2011-05-01inet: add ether_aton testcaseDavid A Ramos
Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
2011-04-18test: fix tst-tls13 expected result and timeoutSalvatore Cro
tst-tls13 is expected to return 0 when passing. Set higher timeout to avoid failure on slow archs. Signed-off-by: Salvatore Cro <salvatore.cro@st.com> Signed-off-by: Carmelo Amoroso <carmelo.amoroso@st.com>
2010-12-01libc: fix strtoqNatanael Copa
strtoq should always return a quad_t and be an alias of strtol on 64 bit and strtoll on 32 bit. Signed-off-by: Natanael Copa <natanael.copa@gmail.com> Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
2010-11-24test: ignore some more binariesBernhard Reutner-Fischer
Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
2010-11-24wchar: bug #1471: fix cornercase in mbrtowcBernhard Reutner-Fischer
Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
2010-11-24test/math: bessel depend on XSI_MATHBernhard Reutner-Fischer
Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
2010-10-31libm: fix tgamma to actually do return true gamma functionDenys Vlasenko
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2010-10-31libm: remove int_WRAPPER_C99 macro, add test which checks that I did not ↵Denys Vlasenko
break it Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2010-10-31libm: fix false positives in double testsDenys Vlasenko
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2010-10-31libm: fix remaining failures in test-floatDenys Vlasenko
These two failures are fixed: Failure: Test: ilogb (0.0) == FP_ILOGB0 plus exceptions allowed Failure: Test: ilogb (NaN) == FP_ILOGBNAN plus exceptions allowed Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2010-10-30libm: fix rint/scalb testcase failuresDenys Vlasenko
These failures no longer happen: Failure: Test: scalb (2.0, 0.5) == NaN plus invalid exception Failure: Test: scalb (3.0, -2.5) == NaN plus invalid exception Failure: Test: rint (0.5) == 0.0 Failure: Test: rint (1.5) == 2.0 Failure: Test: rint (2.5) == 2.0 Failure: Test: rint (3.5) == 4.0 Failure: Test: rint (4.5) == 4.0 Failure: Test: rint (-0.5) == -0.0 Failure: Test: rint (-1.5) == -2.0 Failure: Test: rint (-2.5) == -2.0 Failure: Test: rint (-3.5) == -4.0 Failure: Test: rint (-4.5) == -4.0 Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2010-10-30test/math/*: unbreakDenys Vlasenko
test/math was not running at all, presume it has bit rotted: It was trying to run libm-test.c as if it is a binary. It was looking for libm-test-ulps (file with allowed errors in lower bits) in arch-specific dirs which do not exist in uclibc, as a result wrong file (libm-test.inc) was used instead. Test failure was not showing the error result, user had to fish it out from some .out files. I added libm-test-ulps-ARCH files from recent glibc, this filtered out a lot of false positives. For example, cosf(M_PI_6l * 4.0) ideally should be -0.5, we are getting -0.50000005047356477217, and this isn't a failure (the difference is one lowest bit of mantissa). "make check UCLIBC_ONLY=1 VERBOSE=1" still fails, but not as catastrophically as before. For the record, the failure occurs on the stage where we check 32-bit float functions, these tests fail: Failure: Test: modf (NaN, &x) == NaN Failure: Test: ilogb (NaN) == FP_ILOGBNAN plus exceptions allowed Failure: Test: scalb (2.0, 0.5) == NaN plus invalid exception Failure: Test: scalb (3.0, -2.5) == NaN plus invalid exception Failure: Test: scalb (0, NaN) == NaN Failure: Test: scalb (1, NaN) == NaN Failure: Test: scalb (0, inf) == NaN plus invalid exception Failure: Test: scalb (-0, inf) == NaN plus invalid exception Failure: Test: scalb (1, inf) == inf Failure: Test: scalb (-1, inf) == -inf Failure: Test: scalb (inf, -inf) == NaN plus invalid exception Failure: Test: scalb (-inf, -inf) == NaN plus invalid exception Failure: Test: scalb (1, NaN) == NaN Failure: Test: scalb (0, NaN) == NaN Failure: Test: scalb (inf, NaN) == NaN Failure: Test: pow (1, NaN) == 1 Failure: Test: pow (1, inf) == 1 Failure: Test: pow (-1, inf) == 1 Failure: Test: pow (1, -inf) == 1 Failure: Test: pow (-1, -inf) == 1 Failure: Test: rint (0.5) == 0.0 Failure: Test: rint (1.5) == 2.0 Failure: Test: rint (2.5) == 2.0 Failure: Test: rint (3.5) == 4.0 Failure: Test: rint (4.5) == 4.0 Failure: Test: rint (-0.5) == -0.0 Failure: Test: rint (-1.5) == -2.0 Failure: Test: rint (-2.5) == -2.0 Failure: Test: rint (-3.5) == -4.0 Failure: Test: rint (-4.5) == -4.0 Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2010-09-16libc: Add canonicalize_file_name functionCarmelo Amoroso
Add canonicalize_file_name function and its related tests. Required by elfutils and coreutils (readlink). Signed-off-by: Salvatore Cro <salvatore.cro@st.com> Signed-off-by: Carmelo Amoroso <carmelo.amoroso@st.com>
2010-09-16test: Update gitignore to take into account new tests added.Carmelo Amoroso
Signed-off-by: Carmelo Amoroso <carmelo.amoroso@st.com>
2010-09-15tests: Added new nptl testsSalvatore Cro
tests: Added several nptl tests from glibc 2.10.1 Signed-off-by: Salvatore Cro <salvatore.cro@st.com> Signed-off-by: Carmelo Amoroso <carmelo.amoroso@st.com>
2010-09-09tests: nptl tests dependencies cleanupSalvatore Cro
tests: some cleanings on nptl tests' dependencies. Signed-off-by: Salvatore Cro <salvatore.cro@st.com> Signed-off-by: Carmelo Amoroso <carmelo.amoroso@st.com>
2010-08-17testsuite: nptl/tst-basic5 depends on SUSV4_LEGACYBernhard Reutner-Fischer
Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
2010-08-05getnet: switch to config parserBernhard Reutner-Fischer
Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
2010-08-05sysconf: implement _SC_NPROCESSORS_CONF, _SC_NPROCESSORS_ONLNBernhard Reutner-Fischer
perusing the config parser Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
2010-07-27Fix ctime() standard compliance bugDavid A Ramos
fixes issue2209: ctime() was updated in 0.9.31 to call localtime_r() instead of localtime() to avoid using a static buffer. Unfortunately, this change replaces the static buffer (which is zeroed out on initialization) with an uninitialized local buffer. In the common case, this has no effect. However, with a sufficiently large time_t value, the value returned differs from that returned by asctime(localtime(t)), and thus violates the ANSI/ISO standard. An example input is (on a 64-bit machine): time_t t = 0x7ffffffffff6c600; Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
2010-06-25test/nptl: move eintr.c to where it belongsBernhard Reutner-Fischer
Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
2010-06-25test: silence shadow warningBernhard Reutner-Fischer
Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
2010-06-24use uniform form of C99 keywordsBernhard Reutner-Fischer
Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
2010-06-11testsuite: disable some tests for !LFSBernhard Reutner-Fischer
Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
2010-06-10testsuite: .gitignore symlinkBernhard Reutner-Fischer
Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
2010-06-10testsuite: do not run inet tests if !ipv4 && !ipv6Bernhard Reutner-Fischer
Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
2010-06-10lgamma: fix sign handlingBernhard Reutner-Fischer
add testcase from http://sourceware.org/bugzilla/show_bug.cgi?id=4407 Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
2010-05-09powerpc: Add TLS and NPTL supportKhem Raj
Signed-off-by: Khem Raj <raj.khem@gmail.com> Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
2010-04-14Merge commit 'origin/master' into nptlAustin Foxley
Signed-off-by: Austin Foxley <austinf@cetoncorp.com>
2010-04-13test: add API testBernhard Reutner-Fischer
part1; Needs improvement: Think about a sensible way to map feature sets to the mandated syms. Our LEGACY stuff maps to OB, OBXSI for example. A "normal" config should satisfy the BASE (i.e. $foo.SUSv4.syms) Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
2010-04-06Merge commit 'origin/master' into nptlAustin Foxley
Conflicts: libc/misc/utmp/utent.c libc/sysdeps/linux/i386/bits/syscalls.h Signed-off-by: Austin Foxley <austinf@cetoncorp.com>
2010-04-06getconf: move to utils/Bernhard Reutner-Fischer
Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>