Age | Commit message (Collapse) | Author |
|
We need to define the rules for .S files so it
gets the include paths some architectures like mips
include headers
Some architectures e.g. SH have their own version
of pt-initfini.c so look for that first before resorting
to generic version of pt-initfini.c
Signed-off-by: Khem Raj <raj.khem@gmail.com>
|
|
Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
|
|
Signed-off-by: Khem Raj <raj.khem@gmail.com>
|
|
use cancellation (with two 'l') uniformly.
Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
|
|
use __ret uniformly to avoid shadow warnings as seen on x86_64.
Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
|
|
Fixes compilation if NPTL is off.
I hope this doesn't break ARM EABI but cannot check ATM.
Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
|
|
Signed-off-by: Peter S. Mazinger <ps.m@gmx.net>
|
|
This commit gives us a fully functioning NPTL on x86-64 by using the GOTOFF macro
as needed.
Signed-off-by: William Pitcock <nenolod@dereferenced.org>
Signed-off-by: Khem Raj <raj.khem@gmail.com>
|
|
Add some missing prototypes
Signed-off-by: Peter S. Mazinger <ps.m@gmx.net>
|
|
NPTL build did not use the correct bits/sigthread.h, use a common version
avoiding this.
Signed-off-by: Peter S. Mazinger <ps.m@gmx.net>
|
|
Add some missing prototypes
Signed-off-by: Peter S. Mazinger <ps.m@gmx.net>
|
|
ARM disables by default the support for ASM CFI directives.
Anyway using an old version of binutils that does not support some new
pseudo-op, the build fails as below:
AS libpthread/nptl/sysdeps/unix/sysv/linux/close.oS
libpthread/nptl/sysdeps/unix/sysv/linux/close.S: Assembler messages:
libpthread/nptl/sysdeps/unix/sysv/linux/close.S:9: Error: unknown pseudo-op: `.cfi_sections'
The problem is that the .cfi_sections pseudo should be wrapped by a macro
that expands to nothing when the CFI is off.
Signed-off-by: Carmelo Amoroso <carmelo.amoroso@st.com>
CC: Khem Ray <ray.khem@gmail.com>
|
|
Thanks to Nitin Garg for notincing!
Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
|
|
Signed-off-by: Nitin Garg <nitingarg98@gmail.com>
Signed-off-by: Carmelo Amoroso <carmelo.amoroso@st.com>
|
|
Signed-off-by: Khem Raj <raj.khem@gmail.com>
|
|
A sample of the warning reported while building for ARM that has not __ASSUME_TGKILL defined.
libpthread/nptl/sysdeps/unix/sysv/linux/raise.c: In function 'raise':
libpthread/nptl/sysdeps/unix/sysv/linux/raise.c:33:5: warning: "__ASSUME_TGKILL" is not defined
Signed-off-by: Carmelo Amoroso <carmelo.amoroso@st.com>
|
|
Finally got around to testing out latest master and
noticed that some buildsystem work last summer broke
shared-builds of nptl on sparc.
A version of __syscall_error.c needs to be linked into
both libpthread and librt
Signed-off-by: Austin Foxley <austinf@cetoncorp.com>
|
|
pt-*.c files
Signed-off-by: Khem Raj <raj.khem@gmail.com>
|
|
My change a49b3a18e463cbe8c94c41501e386e7f4c61609e fixed two
Unwind_Resume calls to go via PLT to avoid text relocations for PIC
builds. However, it looks the reason for upstream not using PLT calls
is that ebx gets clobbered. So we need to reload it.
Signed-off-by: Timo Teräs <timo.teras@iki.fi>
Signed-off-by: Austin Foxley <austinf@cetoncorp.com>
|
|
Add __tls_get_addr function to static libc allowing to handle
local dynamic TLS access model.
On SH, linker optimizations are not required, so __tls_get_addr
can be called even in statically linked binaries.
Signed-off-by: Filippo Arcidiacono <filippo.arcidiacono@st.com>
Signed-off-by: Carmelo Amoroso <carmelo.amoroso@st.com>
|
|
implementation"
This reverts commit 0c468129356f5ce6780e7369c271d74631ae03ba.
Indeed recent updates into buildsys managed to filter-out generic implementation
when arch specific one is defined, so duplicated symbols into the libc.a
In the meanwhile, do a minor fix into mips version not using relative path
to include <generic/libc-tls.c>
Signed-off-by: Carmelo Amoroso <carmelo.amoroso@st.com>
|
|
libpthread/nptl/sysdeps/generic/libc-tls.c is built as well, so it does not need
that arch specific version of libc-tls.c (MIPS and ALPHA) includes it.
The arch libc-tls.s is aimed to provide the implementation of __tls_get_addr
for the static libc.a, because on these archs the linker relaxations are not
required and it could be possible to have local-dynamic access models in static
libraries as well.
Signed-off-by: Carmelo Amoroso <carmelo.amoroso@st.com>
|
|
The SSP_ALL_CFLAGS in nptl arch CFLAGS leaks out and forces things
like dl-support.c, brk.c, sbrk.c memcpy, etc to be built with
-fstack-protector-all. This is bad when linking statically since
initializing TLS will call those functions before SSP is initialized.
The libpthread itself will still be built with -fstack-protector-all
due to CFLAGS-nptl has SSP_ALL_CFLAGS in libpthread/nptl/Makefile.in
Thanks to Timo Teras for helping with this.
Signed-off-by: Natanael Copa <natanael.copa@gmail.com>
Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
|
|
If there was an error during syscall then after it's completion a3
register holds a non-zero value and v0 holds an actual error code which
should be saved in errno. This can be achieved by calling
__syscall_error with the value from v0 as a parameter. So this value
should be stored in a0, but the appropriate assembly instructions are
missing. Fixed this now by adding "move a0, v0".
I think it was once fixed by 58c5f8ba4cdf62342d05a546d15404cbbb3c4e07
but then something went wrong. Again...
Signed-off-by: Alexander Gordeev <lasaine@lvk.cs.msu.su>
Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
|
|
text data bss dec hex filename
- 318 4 0 322 142 libc/pwd_grp/lckpwdf.o
+ 312 4 0 316 13c libc/pwd_grp/lckpwdf.o
- 166 0 1 167 a7 libc/stdlib/abort.o
+ 157 0 1 158 9e libc/stdlib/abort.o
- 42 0 0 42 2a libc/sysdeps/linux/common/pause.o
+ 27 0 0 27 1b libc/sysdeps/linux/common/pause.o
Signed-off-by: Denys Vlasenko <dvlasenk@redhat.com>
|
|
This reverts commit f71c0d8af11252f119fad04938ddd5501a7df21a.
|
|
Unwind_Resume needs to be called via PLT. Most calls are already proper,
this fix the remaining two problems.
Signed-off-by: Timo Teräs <timo.teras@iki.fi>
Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
|
|
Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
|
|
Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
|
|
Building things like vlc checks if _POSIX_SPAWN is defined. Since
posix_spawn is not implemented we dont define it.
Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
Signed-off-by: Natanael Copa <ncopa@alpinelinux.org>
|
|
Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
|
|
Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
|
|
Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
|
|
__i686 is a gcc-defined macro, so i686 build failed with:
libpthread/nptl/sysdeps/unix/sysv/linux/i386/i686/../i486/pthread_cond_wait.S: Assembler messages:
libpthread/nptl/sysdeps/unix/sysv/linux/i386/i686/../i486/pthread_cond_wait.S:572: Error: junk at end of line, first unrecognized character is `1'
libpthread/nptl/sysdeps/unix/sysv/linux/i386/i686/../i486/pthread_cond_wait.S:573: Error: junk at end of line, first unrecognized character is `1'
libpthread/nptl/sysdeps/unix/sysv/linux/i386/i686/../i486/pthread_cond_wait.S:574: Error: junk at end of line, first unrecognized character is `1'
libpthread/nptl/sysdeps/unix/sysv/linux/i386/i686/../i486/pthread_cond_wait.S:575: Error: junk at end of line, first unrecognized character is `.'
libpthread/nptl/sysdeps/unix/sysv/linux/i386/i686/../i486/pthread_cond_wait.S:576: Error: junk at end of line, first unrecognized character is `1'
libpthread/nptl/sysdeps/unix/sysv/linux/i386/i686/../i486/pthread_cond_wait.S:579: Error: expected comma after name `' in .size directive
Signed-off-by: Roman I Khimov <khimov@altell.ru>
Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
|
|
thanks to khem for noticing
Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
|
|
Signed-off-by: Khem Raj <raj.khem@gmail.com>
|
|
Now automatically picks the correct (arch and subarch specific) impls in
favour of generic impls.
make O=/tmp/objs PREFIX=/my/sysroot -j
works now as expected (both out-of-tree as well as parallel-safe).
Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
|
|
Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
|
|
Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
|
|
* Current function is a C protype and PSEUDO macro does not
transfer syscall return parameters to correct argument registers
for a C function. This causes problem with syscalls setting wrong
value for errno when they encounter an error.
* Fixes PR/2089 for mips/nptl
Signed-off-by: Khem Raj <raj.khem@gmail.com>
|
|
* mips has it own variant.
* we dont need to build dl-tls.c here its already
built as part of ldso.
Signed-off-by: Khem Raj <raj.khem@gmail.com>
|
|
Signed-off-by: Khem Raj <raj.khem@gmail.com>
|
|
blame 6cbeaa5dd11a1b506a8a97b4dfb4e632240f9953
Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
|
|
Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
|
|
Signed-off-by: Khem Raj <raj.khem@gmail.com>
|
|
* Synced with eabi version of sysdep-cancel.h from glibc.
we have been using OABI version which does not work
Signed-off-by: Khem Raj <raj.khem@gmail.com>
|
|
Signed-off-by: Mirko Vogt <dev@nanl.de>
Signed-off-by: Austin Foxley <austinf@cetoncorp.com>
|
|
Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
|
|
Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
|
|
Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
|