Age | Commit message (Collapse) | Author |
|
A sample of the warning reported while building for ARM that has not __ASSUME_TGKILL defined.
libpthread/nptl/sysdeps/unix/sysv/linux/raise.c: In function 'raise':
libpthread/nptl/sysdeps/unix/sysv/linux/raise.c:33:5: warning: "__ASSUME_TGKILL" is not defined
Signed-off-by: Carmelo Amoroso <carmelo.amoroso@st.com>
|
|
Finally got around to testing out latest master and
noticed that some buildsystem work last summer broke
shared-builds of nptl on sparc.
A version of __syscall_error.c needs to be linked into
both libpthread and librt
Signed-off-by: Austin Foxley <austinf@cetoncorp.com>
|
|
My change a49b3a18e463cbe8c94c41501e386e7f4c61609e fixed two
Unwind_Resume calls to go via PLT to avoid text relocations for PIC
builds. However, it looks the reason for upstream not using PLT calls
is that ebx gets clobbered. So we need to reload it.
Signed-off-by: Timo Teräs <timo.teras@iki.fi>
Signed-off-by: Austin Foxley <austinf@cetoncorp.com>
|
|
The SSP_ALL_CFLAGS in nptl arch CFLAGS leaks out and forces things
like dl-support.c, brk.c, sbrk.c memcpy, etc to be built with
-fstack-protector-all. This is bad when linking statically since
initializing TLS will call those functions before SSP is initialized.
The libpthread itself will still be built with -fstack-protector-all
due to CFLAGS-nptl has SSP_ALL_CFLAGS in libpthread/nptl/Makefile.in
Thanks to Timo Teras for helping with this.
Signed-off-by: Natanael Copa <natanael.copa@gmail.com>
Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
|
|
If there was an error during syscall then after it's completion a3
register holds a non-zero value and v0 holds an actual error code which
should be saved in errno. This can be achieved by calling
__syscall_error with the value from v0 as a parameter. So this value
should be stored in a0, but the appropriate assembly instructions are
missing. Fixed this now by adding "move a0, v0".
I think it was once fixed by 58c5f8ba4cdf62342d05a546d15404cbbb3c4e07
but then something went wrong. Again...
Signed-off-by: Alexander Gordeev <lasaine@lvk.cs.msu.su>
Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
|
|
text data bss dec hex filename
- 318 4 0 322 142 libc/pwd_grp/lckpwdf.o
+ 312 4 0 316 13c libc/pwd_grp/lckpwdf.o
- 166 0 1 167 a7 libc/stdlib/abort.o
+ 157 0 1 158 9e libc/stdlib/abort.o
- 42 0 0 42 2a libc/sysdeps/linux/common/pause.o
+ 27 0 0 27 1b libc/sysdeps/linux/common/pause.o
Signed-off-by: Denys Vlasenko <dvlasenk@redhat.com>
|
|
This reverts commit f71c0d8af11252f119fad04938ddd5501a7df21a.
|
|
Unwind_Resume needs to be called via PLT. Most calls are already proper,
this fix the remaining two problems.
Signed-off-by: Timo Teräs <timo.teras@iki.fi>
Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
|
|
Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
|
|
Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
|
|
Building things like vlc checks if _POSIX_SPAWN is defined. Since
posix_spawn is not implemented we dont define it.
Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
Signed-off-by: Natanael Copa <ncopa@alpinelinux.org>
|
|
Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
|
|
Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
|
|
__i686 is a gcc-defined macro, so i686 build failed with:
libpthread/nptl/sysdeps/unix/sysv/linux/i386/i686/../i486/pthread_cond_wait.S: Assembler messages:
libpthread/nptl/sysdeps/unix/sysv/linux/i386/i686/../i486/pthread_cond_wait.S:572: Error: junk at end of line, first unrecognized character is `1'
libpthread/nptl/sysdeps/unix/sysv/linux/i386/i686/../i486/pthread_cond_wait.S:573: Error: junk at end of line, first unrecognized character is `1'
libpthread/nptl/sysdeps/unix/sysv/linux/i386/i686/../i486/pthread_cond_wait.S:574: Error: junk at end of line, first unrecognized character is `1'
libpthread/nptl/sysdeps/unix/sysv/linux/i386/i686/../i486/pthread_cond_wait.S:575: Error: junk at end of line, first unrecognized character is `.'
libpthread/nptl/sysdeps/unix/sysv/linux/i386/i686/../i486/pthread_cond_wait.S:576: Error: junk at end of line, first unrecognized character is `1'
libpthread/nptl/sysdeps/unix/sysv/linux/i386/i686/../i486/pthread_cond_wait.S:579: Error: expected comma after name `' in .size directive
Signed-off-by: Roman I Khimov <khimov@altell.ru>
Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
|
|
Now automatically picks the correct (arch and subarch specific) impls in
favour of generic impls.
make O=/tmp/objs PREFIX=/my/sysroot -j
works now as expected (both out-of-tree as well as parallel-safe).
Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
|
|
Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
|
|
Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
|
|
Signed-off-by: Khem Raj <raj.khem@gmail.com>
|
|
blame 6cbeaa5dd11a1b506a8a97b4dfb4e632240f9953
Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
|
|
Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
|
|
Signed-off-by: Khem Raj <raj.khem@gmail.com>
|
|
* Synced with eabi version of sysdep-cancel.h from glibc.
we have been using OABI version which does not work
Signed-off-by: Khem Raj <raj.khem@gmail.com>
|
|
Signed-off-by: Mirko Vogt <dev@nanl.de>
Signed-off-by: Austin Foxley <austinf@cetoncorp.com>
|
|
Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
|
|
Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
|
|
Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
|
|
* When using NPTL get clone.o from nptl.
* Only use vfork if syscall is there.
* Add libc_a_SSRC to LINUX_LIBC_ARCH_OBJ.
* Use CLEAN_* for clean target.
Signed-off-by: Khem Raj <raj.khem@gmail.com>
|
|
* This was dropped accidently in last merge
removal meant a lot of warnings about undefined
_ABI64.
Signed-off-by: Khem Raj <raj.khem@gmail.com>
|
|
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
|
|
Generic ones were broken on x86_64, pthread/ex2 test failed while pthread/ex5
worked fine. So use arch-specific functions and fix linkage failure with
__pthread_mutex_cond_lock_adjust.
Signed-off-by: Roman I Khimov <khimov@altell.ru>
Signed-off-by: Austin Foxley <austinf@cetoncorp.com>
|
|
They were present in sources, but not compiled in. Generic routines are
broken badly on x86_64, even basic threading test like pthread/ex1 didn't
work with them.
Signed-off-by: Roman I Khimov <khimov@altell.ru>
Signed-off-by: Austin Foxley <austinf@cetoncorp.com>
|
|
Signed-off-by: Andreas Schultz <andreas.schultz@gmail.com>
Signed-off-by: Austin Foxley <austinf@cetoncorp.com>
|
|
also sync up not-cancel.h headers between all three thread libraries
Signed-off-by: Austin Foxley <austinf@cetoncorp.com>
|
|
Update all the nptl clean targets (both objects and headers) to
use the new syntax using CLEAN_<full_path> and HEADER_<full_path>.
Signed-off-by: Carmelo Amoroso <carmelo.amoroso@st.com>
|
|
The libc stubs should never override the libpthread provided
functions inside libpthread, otherwise the struct pthread_functions
that is used by the forwarder stubs goes bad.
Signed-off-by: Timo Teras <timo.teras@iki.fi>
Signed-off-by: Austin Foxley <austinf@cetoncorp.com>
|
|
This reverts most of commit 1610762362e651f86ca284ac59a1d7ec88034e4e.
Marking the symbols hidden is wrong, because libc accesses
the pthreads internal symbols for internal locking.
Signed-off-by: Timo Teras <timo.teras@iki.fi>
Signed-off-by: Austin Foxley <austinf@cetoncorp.com>
|
|
Add attribute_hidden to all symbols having libc forwarder. This prevents
recursive self calls which would happen if libc is before libpthread in
linking order: the forwarder functions would call itself via the function
table, since the libpthread symbols would get overwritten with libc ones.
This has not been a problem in glibc since there these symbols are marked
hidden with linker version-script. Since we don't use one, we need to mark
these explicitly.
Signed-off-by: Timo Teräs <timo.teras@iki.fi>
Signed-off-by: Austin Foxley <austinf@cetoncorp.com>
|
|
Remove the -DUSE___THREAD from specific assembler files since its
used everywhere anyway.
This is a cleanup after 447a9d1cc181395c3e2ea77ea88e45dee4b30ce6
Signed-off-by: Natanael Copa <natanael.copa@gmail.com>
Signed-off-by: Austin Foxley <austinf@cetoncorp.com>
|
|
NPTL defines errno as __thread variable. Define USE___THREAD so proper
errno assignment is used in assembly files.
This fixes segfault while building python.
Signed-off-by: Timo Teräs <timo.teras@iki.fi>
Signed-off-by: Natanael Copa <natanael.copa@gmail.com>
Signed-off-by: Austin Foxley <austinf@cetoncorp.com>
|
|
fixes typo in a1ee5b32fc698297149c770417354441ee62701e which forgot to
rename __pthread_attr_getaffinity_np to pthread_attr_getaffinity_np.
Thanks to Andre DRASZIK for mentioning my omission.
Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
|
|
Signed-off-by: Austin Foxley <austinf@cetoncorp.com>
|
|
* Introduce pregen-headers-y which is list of generated headers
during the build and add this to pregen target in top level makefile.
Also add nptl_headers, nptl_arch_headers, nptl_linux_headers
to this if compiling with nptl.
* Replace pthread_pregen var with pregen-headers-y.
* Make nptl_headers, nptl_arch_headers, nptl_linux_headers variables
instead of sub targets.
Signed-off-by: Khem Raj <raj.khem@gmail.com>
|
|
* The changes to clone.S needs testing
Signed-off-by: Khem Raj <raj.khem@gmail.com>
|
|
Signed-off-by: Austin Foxley <austinf@cetoncorp.com>
|
|
This patch fixes a build problem into the lowlevellock.S
when support FUTEX_CLOCK_REALTIME (kernel newer than 2.6.29).
__have_futex_clock_realtime symbol is not defined when set
__ASSUME_FUTEX_CLOCK_REALTIME. The same is on i386 arch.
Signed-off-by: Giuseppe Cavallaro <peppe.cavallaro@st.com>
Signed-off-by: Carmelo Amoroso <carmelo.amoroso@st.com>
|
|
also fix up clone.S from sync
Signed-off-by: Austin Foxley <austinf@cetoncorp.com>
|
|
also cleanup some PIC (should be __PIC__) that snuck in
Signed-off-by: Austin Foxley <austinf@cetoncorp.com>
|
|
Signed-off-by: Austin Foxley <austinf@cetoncorp.com>
|
|
Signed-off-by: Khem Raj <raj.khem@gmail.com>
|
|
Signed-off-by: Khem Raj <raj.khem@gmail.com>
|