Age | Commit message (Collapse) | Author |
|
basically from or1k port of uClibc-ng, with fixes for structures in
pthreadtypes.h from 64 bit architectures.
18 testsuite failures counted.
|
|
The return type of syscall() is long so __syscall_error, which is jumped
to by syscall handlers to stash an error number into errno, must return
long too otherwhise it returs 4294967295L instead of -1L. For example,
syscall for x86_64 is defined in libc/sysdeps/linux/x86_64/syscall.S as
syscall:
movq %rdi, %rax /* Syscall number -> rax. */
movq %rsi, %rdi /* shift arg1 - arg5. */
movq %rdx, %rsi
movq %rcx, %rdx
movq %r8, %r10
movq %r9, %r8
movq 8(%rsp),%r9 /* arg6 is on the stack. */
syscall /* Do the system call. */
cmpq $-4095, %rax /* Check %rax for error. */
jae __syscall_error /* Branch forward if it failed. */
ret /* Return to caller. */
In libc/sysdeps/linux/x86_64/__syscall_error.c, __syscall_error is
defined as
int __syscall_error(void) attribute_hidden;
int __syscall_error(void)
{
register int err_no __asm__ ("%rcx");
__asm__ ("mov %rax, %rcx\n\t"
"neg %rcx");
__set_errno(err_no);
return -1;
}
So __syscall_error returns -1 as a 32-bit int in a 64-bit register, %rax
(0x00000000ffffffff, whose decimal value is decimal 4294967295) and a
test like this always returns false:
if (syscall(number, ...) == -1)
foo();
Fix the error by making __syscall_error return a long, like syscall().
The problem can be circumvented by the caller by coercing the returned
value to int before comparing it to -1:
if ((int) syscall(number, ...) == -1)
foo();
The same problem probably occurs on other 64-bit systems but so far only
x86_64 was tested, so this change must be considered experimental.
Signed-off-by: Carlos Santos <unixmania@gmail.com>
|
|
They do not work on MMU-less systems.
For atfork, implement a hidden function that always returns EPERM.
* libpthread/nptl/sysdeps/unix/sysv/linux/fork.c: Disable if
__ARCH_USE_MMU__ is not defined.
* libpthread/nptl/sysdeps/unix/sysv/linux/libc_pthread_init.c
(__libc_pthread_init): Handle __ARCH_USE_MMU__.
* libpthread/nptl/sysdeps/unix/sysv/linux/register-atfork.c: Likewise.
* libpthread/nptl/sysdeps/unix/sysv/linux/unregister-atfork.c: Likewise.
Signed-off-by: Mickaël Guêné <mickael.guene@st.com>
Signed-off-by: Christophe Lyon <christophe.lyon@st.com>
|
|
Only mips/x86/x86_64 needs a special version of lowlevellock.h.
No regressions found.
|
|
Port over NPTL/TLS support from GNU C Library.
In the first step only the slower syscall is used for TLS
access. The uClibc-ng testsuite shows 79 errors, so their
is room for bugfixes and improvements.
|
|
Signed-off-by: Guo Ren <ren_guo@c-sky.com>
|
|
|
|
From or1k-glibc from blueCmd, his commit "Fix TLS, removed too much in
rebase".
Signed-off-by: Stafford Horne <shorne@gmail.com>
|
|
|
|
Fix iteration over signals, synced with GNU C library code and
pending patches. Issues found when running dhcpcd with hook
scripts. (exit status 127)
Reported-By: kapeka <kapeka@bering-uclibc.de>
|
|
Follow the steps to build c-sky uclibc linux system:
1. git clone https://github.com/c-sky/buildroot.git
2. cd buildroot
3. make qemu_csky_ck810_uclibc_defconfig
4. make
Follow the buildroot/board/qemu/csky/readme.txt to run.
This buildroot toolchain is pre-build, But you can rebuild
the c-sky uclibc-ng alone and install it to the buildroot
sysroot manually.
We'll try our best to improve the uclibc-ng continuously.
Signed-off-by: Guo Ren <ren_guo@c-sky.com>
|
|
Signed-off-by: Stafford Horne <shorne@gmail.com>
|
|
warning: unused variable 'self' [-Wunused-variable]
Signed-off-by: Guo Ren <ren_guo@c-sky.com>
|
|
Similar to a changeset planned in GNU C library remove
any assembly code from sysdep-cancel.h. This allows
to port to new architectures in a simpler way.
|
|
|
|
|
|
Signed-off-by: Waldemar Brodkorb <wbx@openadk.org>
|
|
For the linux kernel (since 2.6.12) MAKE_THREAD_CPUCLOCK
macro-like computation should be used to get clockid.
|
|
cleanup unused and unsupported code.
|
|
|
|
Ported over from GNU C Library and runtime tested in Qemu.
|
|
Follow GNU C Library from c579f48edba88380635ab98cb612030e3ed8691e
and remove the PID caching. These simplifies the architecture specific
assembly code.
The run of the test suite found no regressions, it even solves
some of the test failures for x86/x86_64/sparc.
Reviewed-by: Max Filippov <jcmvbkbc@gmail.com>
Reviewed-by: Vineet Gupta <Vineet.Gupta1@synopsys.com>
Acked-by: Matthew Fortune <Matthew.Fortune@imgtec.com>
Acked-by: Alexey Brodkin <Alexey.Brodkin@synopsys.com>
|
|
This commit includes following features.
1. Support NPTL/TLS
2. Add libm function which is used to handle FP rounding and excpetions
(ex: fclrexcpt,fedisblxcpti,feenablxcpt... )
3. Add *context function for operating user context
(ex: setcontext,getcontext,makecontext... )
4. Change the return flow from signal handler
5. Cleanup of old code
The testsuite only has 2 errors, tst-cpuclock1 and tst-cputimer1,
which are related to timing accuracy. (math and locale tests are disabled)
Signed-off-by: Vincent Ren-Wei Chen <vincentc@andestech.com>
|
|
Since librt and libpthread are now integrated into libc, including
unwind-resume and unwind-forcedunwind implementations of unwind code
makes no sense. Only unwind-forcedunwind is now included with
functions hidden to avoid them overriding the ones from libgcc_s.
* libpthread/nptl/sysdeps/generic/unwind-resume.h: New. Define
generic PERSONALITY_PROTO and PERSONALITY_ARGS and set
HAVE_ARCH_UNWIND_RESUME to 0.
* libpthread/nptl/sysdeps/pthread/unwind-resume.c: Move...
* libpthread/nptl/sysdeps/generic/unwind-resume.c: ... here. Include
generic implementation of _Unwind_Resume on the condition that
!HAVE_ARCH_UNWIND_RESUME. Make functions hidden to prevent them
from overriding libgcc_s's ones.
* libpthread/nptl/sysdeps/pthread/unwind-forcedunwind.c: Likewise.
* libpthread/nptl/sysdeps/arm/unwind-resume.h: New. Define
ARM-specific PERSONALITY_PROTO and PERSONALITY_ARGS and set
HAVE_ARCH_UNWIND_RESUME to 1.
* libpthread/nptl/sysdeps/arm/arm-unwind-resume.c,
* libpthread/nptl/sysdeps/arm/pt-arm-unwind-resume.c,
* libpthread/nptl/sysdeps/arm/rt-arm-unwind-resume.c: New.
ARM-specific implementations of _Unwind_Resume resp. for libc,
libpthread and librt.
* libpthread/nptl/sysdeps/Makefile.commonarch: Remove both
arm-unwind-resume and rt-arm-unwind-resume from
libpthread_arch_CSRC.
* libpthread/nptl/sysdeps/unix/sysv/linux/arm/unwind-forcedunwind.c,
* libpthread/nptl/sysdeps/unix/sysv/linux/arm/unwind-resume.c: Remove.
Signed-off-by: Ignacy Gawędzki <ignacy.gawedzki@green-communications.fr>
|
|
|
|
|
|
|
|
|
|
This reverts commit c13f823941b103cf744929e5afcb3e2bc1342354.
|
|
Only static linking is supported for now.
More debugging and analyzing for ld.so, TLS and NPTL
is required. But at least you can bootup a static
root fileystem in Qemu.
|
|
Not perfect, but a starting point.
Some tests of the test suite are failing.
|
|
There was a deadlock hanging in a sycall to futex,
which should be solved now.
Signed-off-by: Waldemar Brodkorb <wbx@uclibc-ng.org>
|
|
Despite the prev fix, tst-mqueue3 was still segfaulting.
The issue was BLINK register not restored properly for return
00002690 <mq_timedsend>:
2690: sub r9,r25,0x448
2698: ld r10,[r9]
269c: cmp r10,0
26a0: beq -36
26a4: st.aw blink,[sp,-4]
26a8: st.aw r0,[sp,-4]
26ac: st.aw r1,[sp,-4]
26b0: st.aw r2,[sp,-4]
26b4: st.aw r3,[sp,-4]
26b8: st.aw r4,[sp,-4]
26bc: bl 1e28 <__librt_enable_asynccancel>
26c0: mov r9,r0
26c4: ld.ab r4,[sp,4]
26c8: ld.ab r3,[sp,4]
26cc: ld.ab r2,[sp,4]
26d0: ld.ab r1,[sp,4]
26d4: ld.ab r0,[sp,4]
26d8: ld.ab blink,[sp, 4] <---- function return BLINK
26dc: mov r8,182
26e0: trap_s 0
26e2: cmp r0,-1024
26e6: st.aw r0,[sp,-4]
26ea: mov r0,r9
26ee: bl 1e90 <__librt_disable_asynccancel> <-- BLINK clobbered
to next PC
26f2: ld.ab r0,[sp,4] <----| loops here until sp is out of bound
26fa: cmp r0,-1024 |
26fe: jls [blink] -----|
2702: b 15d8
2706: nop_s
So the fix was to retain BLINK on stack before function call, and pop it
later
- 26d8: ld.ab blink,[sp, 4]
+ 26d8: ld blink,[sp] <--- restore BLINK, but retain on stack
26dc: mov r8,182
26e0: trap_s 0
26e2: cmp r0,-1024
26e6: st.aw r0,[sp,-4]
26ea: mov r0,r9
26ee: bl 1e90 <__librt_disable_asynccancel>
26f2: ld.ab r0,[sp,4]
+ 26f6: ld.ab blink,[sp,4] <--- finally pop BLINK
26fa: cmp r0,-1024
26fe: jls [blink]
Reported-by: Eugeniy Paltsev <paltsev@synopsys.com>
Cc: Alexey Brodkin <abrodkin@synopsys.com>
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
|
|
This was reported as uClibc test suite failures of tst-mqueue3 and
tst-mqueue5.
The syscall args were getting clobbered, so use scratch regs which are
not used for syscall args
00002690 <mq_timedsend>:
; SINGLE_THREAD_P
2690: sub r1,r25,0x448 <--- clobers r1, r2
2698: ld r2,[r1]
269c: cmp r2,0
26a0: bz mq_timedsend_nocancel
; DOCARGS (saves syscall args but r1, r2 clobbered already)
26a4: st.aw blink,[sp,-4]
26a8: st.aw r0,[sp,-4]
26ac: st.aw r1,[sp,-4]
26b0: st.aw r2,[sp,-4]
26b4: st.aw r3,[sp,-4]
26b8: st.aw r4,[sp,-4]
26bc: bl 1e28 <__librt_enable_asynccancel>
Reported-by: Eugeniy Paltsev <paltsev@synopsys.com>
Cc: Alexey Brodkin <abrodkin@synopsys.com>
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
|
|
Remove powerpc64 bits as we only support powerpc32.
|
|
Similar to musl libc a single libc has many benefits and solves
some open issues with uClibc-ng.
- no pthread_mutex_* weak symbols exported anymore
- applications no longer failing to link when either
-lrt or -lpthread are missing for dynamic and static linking mode
- smaller C library
- slightly better runtime performance
|
|
We do not support 2.4 Linux kernels anyway, and almost
all newer 2.6 kernels should have tgkill syscall.
Cleanup the raise situation, pt-raise.c is unused, sync
raise.c with latest GNU libc.
Signed-off-by: Waldemar Brodkorb <wbx@uclibc-ng.org>
|
|
The code was disabled a while ago in commit:
814b0901f460a246315bfa7933a661f415bdc7fa
Signed-off-by: Waldemar Brodkorb <wbx@uclibc-ng.org>
|
|
Add test case for the deadlock detection.
Reported-By: Martin Willi <martin@strongswan.org>
|
|
Simplify and use generic lowlevellock.
Tested-by: Waldemar Brodkorb <wbx@uclibc-ng.org>
Signed-off-by: Leonid Lisovskiy <lly.dev@gmail.com>
|
|
Simplify and use generic lowlevellock.
Tested-by: Waldemar Brodkorb <wbx@uclibc-ng.org>
Signed-off-by: Leonid Lisovskiy <lly.dev@gmail.com>
|
|
Simplify and use generic lowlevellock.
Tested-by: Waldemar Brodkorb <wbx@uclibc-ng.org>
Signed-off-by: Leonid Lisovskiy <lly.dev@gmail.com>
|
|
lowlevellock.c for arm differs from the generic lowlevellock.c only in
insignificant ways, so can be removed. Follow glibc commit 6d96f5e4c0
Solves __lll_timedlock_wait busy-wait issues described at
http://sourceware.org/bugzilla/show_bug.cgi?id=15119
Signed-off-by: Leonid Lisovskiy <lly.dev@gmail.com>
|
|
License notices in most of the source files refer to an outdated
FSF address. Replace it with URL, like in the rest of the source
files.Signed-off-by: Nikola Forró <nforro@redhat.com>
|
|
Trivial fix.
Signed-Off-By: Leonid Lisovskiy <lly.dev@gmail.com>
|
|
It's even no longer required for non-ported ppc64
architecture. Sync with GNU C library.
This simplify the macros in include/libc-symbols.h.
|
|
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Signed-off-by: Waldemar Brodkorb <wbx@uclibc-ng.org>
|
|
Commit 2d9740a65a "uclibc: nptl: fix __lll_lock_wait_private multiple definition"
did a sweeping change which did for all in tree arches at that time (ARC
wasn't)
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
|
|
Most changes are mechanical replacement of 'retw' instruction with
'abi_ret' macro, defined to 'retw' or 'ret' according to ABI.
Assembly code that makes calls is duplicated for call0 ABI with changed
register numbers for parameters/return value and call instruction.
'entry' instructions are replaced with 'abi_entry' macro.
More interesting changes:
- non-leaf assembly functions (e.g. _dl_tlsdesc_dynamic,
_dl_linux_resolve, SYSCALL_ERROR_HANDLER, PSEUDO) now need to preserve
registers around intermediate calls they make, use temporary stack
frame for that;
- setjmp/longjmp only need to save and restore return address, stack
pointer and callee-saved registers in the jmpbuf;
- __clone and syscall functions had hardcoded offsets to parameter
passed on stack, on call0 ABI they don't need stack frame, so the
offset is different. Replace these offsets with FRAMESIZE macro.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
|
|
|