summaryrefslogtreecommitdiff
path: root/libpthread/linuxthreads
AgeCommit message (Collapse)Author
2016-09-26use a single libc and deduplicate threading codeWaldemar Brodkorb
Similar to musl libc a single libc has many benefits and solves some open issues with uClibc-ng. - no pthread_mutex_* weak symbols exported anymore - applications no longer failing to link when either -lrt or -lpthread are missing for dynamic and static linking mode - smaller C library - slightly better runtime performance
2016-09-26linuxthreads: use tkill syscall for raiseWaldemar Brodkorb
Seems better and more stable.
2016-09-19linuxthreads: Fix up pthread.h for XPG7.Leonid Lisovskiy
[ glibc commit d3c7e68655 ] Signed-off-by: Leonid Lisovskiy <lly.dev@gmail.com>
2016-08-16linuxthreads: install libpthread_nonshared.aWaldemar Brodkorb
This is useful to build native gcc on targets supporting Linuxthreads instead of NPTL.
2016-06-30nds32: add support for new architectureWaldemar Brodkorb
Add support for Andes Technology NDS32 architecture. See here http://www.andestech.com/en/index/index.htm for more informaton. Verification of the port from an older uClibc port was done on a sponsored AG101p board. The testsuite only has 5 errors, three are related to an existing bug in dlclose() with LT.old, also happening on cris32 and m68k. Failures to fallocate/posix_fallocate are unresolved. Thanks to Andes Technology sponsoring the hardware and being very helpful while doing the uClibc-ng porting. Signed-off-by: Waldemar Brodkorb <wbx@uclibc-ng.org>
2016-06-23libs: install backward compatibility symlinksAlexey Brodkin
Simplify the switch from uClibc to uClibc-ng. Apps already built against uClibc-0.9.x.y require .so.0 libs to present on target which in case of current uClibc-ng is not the case and those apps could not be run. This change creates symlinks from .so.1 to .so.0 for most of other libs in the same way as it was done by 23e96d89b6ab "ldso: install backward compatibility symlink by default" Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com> Cc: Waldemar Brodkorb <wbx@uclibc-ng.org> Cc: Vineet Gupta <vgupta@synopsys.com> Cc: Anton Kolesov <akolesov@synopsys.com>
2016-05-31linuxthreads.old: Fix segfault when pthread_mutex_unlock() called against ↵Leonid Lisovskiy
unlocked NORMAL mutex. Althought, it is undefined behavior, there is no reason for segfault. Program received signal SIGSEGV, Segmentation fault. __pthread_unlock (lock=lock@entry=0x804b03c <lock+16>) at libpthread/linuxthreads.old/spinlock.c:231 231 (&lock->__status, oldstatus, (long)(thr->p_nextlock) & ~1L)) It occurs only on platforms which has HAS_COMPARE_AND_SWAP defined. Restore glibc commit fbaf6e72d6 "spinlock.c (__pthread_unlock): Don't crash if called for an untaken mutex." behavior, broken later by commit 4ad1d0cfbf. Signed-off-by: Leonid Lisovskiy <lly.dev@gmail.com>
2016-05-28linuxthreads: Fix warnings in pthread_tryjoin_np(), pthread_timedjoin_np()Leonid Lisovskiy
Accidentally, commit 43ef9c6b3 wasn't taken into account. Signed-off-by: Leonid Lisovskiy <lly.dev@gmail.com>
2016-05-24microblaze: fix linuxthreads supportWaldemar Brodkorb
Got the working code from https://github.com/jdkoftinoff/mb-linux-msli/, otherwise SIGILL while using linuxthreads.
2016-05-18remove linuxthreads.new, rename linuxthreads.oldWaldemar Brodkorb
Linuxthreads.new isn't really useful with the existence of NPTL/TLS for well supported architectures. There is no reason to use LT.new for ARM/MIPS or other architectures supporting NPTL/TLS. It is not available for noMMU architectures like Blackfin or FR-V. To simplify the live of the few uClibc-ng developers, LT.new is removed and LT.old is renamed to LT. LINUXTHREADS_OLD -> UCLIBC_HAS_LINUXTHREADS
2016-04-15replace FSF addresses with URLsNikola Forró
License notices in most of the source files refer to an outdated FSF address. Replace it with URL, like in the rest of the source files.Signed-off-by: Nikola Forró <nforro@redhat.com>
2015-12-05remove __UCLIBC_ASM_GLOBAL_DIRECTIVE__Waldemar Brodkorb
.globl can be used for every architecture so remove the define. Sync with GNU C library.
2015-10-09add new architecture support for or1kWaldemar Brodkorb
Information about Openrisc: http://opencores.org/or1k/Main_Page Integrated from: https://github.com/openrisc/uClibc-or1k
2015-04-12remove more of the link_warningsWaldemar Brodkorb
Only the stub warnings left for now.
2015-03-29merge uClibc git masterWaldemar Brodkorb
2015-03-13unistd.h: put getppid under XOPEN2K8Bernhard Reutner-Fischer
Add __LEAF to all __THROW, introduce non-leaf __THROWNL Adjust affected spots accordingly. Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
2015-02-14Revert "resolve merge"Waldemar Brodkorb
This reverts commit 6b6ede3d15f04fe825cfa9f697507457e3640344.
2015-02-14resolve mergeWaldemar Brodkorb
2014-10-03linuxthreads: fix compile error for non-MMUWaldemar Brodkorb
Otherwise you get following linking error, because of missing functions in libc.a: undefined reference to `__libc_enable_asynccancel' Fix by Thorsten Glaser while hacking session.
2014-10-03m68k: fix linuxthreads compile for coldfireWaldemar Brodkorb
The tas instruction is not available for most coldfire CPU's. Use bset instead in this case as already used in linuxthreads.old.
2014-09-20linuxthreads: remove unused s390 codeWaldemar Brodkorb
Cleanup linuxthreads by removing unused s390 code. Signed-off-by: Waldemar Brodkorb <wbx@openadk.org>
2014-09-16buildsys: fix IS_IN_lib*Bernhard Reutner-Fischer
define NOT_IN_libc / IS_IN_libxxx appropriately to fix pthread_once Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
2014-09-04sparc: remove sparc64/sparcv9 codeWaldemar Brodkorb
The sparc64/sparcv9 code is incomplete. Furthermore there is no real embedded hardware for sparc64 available, so better remove it until someone comes up with a complete port. Signed-off-by: Waldemar Brodkorb <wbx@openadk.org> Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
2013-03-13LT{,.old}: include stddef.h for size_tVineet Gupta
A user application built with -D_POSIX_C_SOURCE=200112L and #include signal.h, yields following compilation error: ------------------->8----------------------------- arc-linux-uclibc-gcc -D_POSIX_C_SOURCE=200112L hello.c In file included from /opt/INSTALL/lib/gcc/arc-linux-uclibc/4.4.7/../../../../arc-linux-uclibc/sys-include/signal.h:429, from hello.c:1: /opt/INSTALL/lib/gcc/arc-linux-uclibc/4.4.7/../../../../arc-linux-uclibc/sys-include/bits/pthreadtypes.h:48: error: expected specifier-qualifier-list before 'size_t' ------------------->8----------------------------- The fix is to make sure size_t is explicitly provided to pthreadtype.h Signed-off-by: Vineet Gupta <vgupta@synopsys.com> Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
2013-03-07libpthread: Remove useless .cvsignore filesMarkos Chandras
Signed-off-by: Markos Chandras <hwoarang@gentoo.org> Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
2013-02-20not-cancel.h: Use openat if arch does not have the open syscallMarkos Chandras
Signed-off-by: Markos Chandras <markos.chandras@imgtec.com> Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
2012-11-18drop support for pre ISO-C compilersMike Frysinger
This drops __signed, __volatile, and __const. Only the latter was used in the code base, and for uClibc, not consistently. Much of the code used plain "const" which meant "__const" was useless. Really, the point of this is to stay in sync with what glibc did. Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2012-11-18Replace FSF snail mail address with URLsMike Frysinger
This matches a similar change made to glibc. No functional changes here. Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2012-06-15remove arm specific sysdep.h from linuxthreads newPeter S. Mazinger
Signed-off-by: Peter S. Mazinger <ps.m@gmx.net> Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
2012-06-15internals.h: mark __pthread_message hiddenPeter S. Mazinger
Signed-off-by: Peter S. Mazinger <ps.m@gmx.net> Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
2012-06-15linuxthreads: guard *tsd* related stuff correctlyPeter S. Mazinger
Signed-off-by: Peter S. Mazinger <ps.m@gmx.net> Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
2012-06-15linuxthreads: style updatePeter S. Mazinger
Signed-off-by: Peter S. Mazinger <ps.m@gmx.net> Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
2012-06-15linuxthreads: use __UCLIBC_HAS_TLS__ consistentlyPeter S. Mazinger
replace USE_TLS, HAVE___THREAD and USE___THREAD with __UCLIBC_HAS_TLS__ Signed-off-by: Peter S. Mazinger <ps.m@gmx.net> Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
2012-06-15move __libc_pthread_init prototype to pthread-functions.hPeter S. Mazinger
Signed-off-by: Peter S. Mazinger <ps.m@gmx.net> Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
2012-06-15forward.c: no need for attribute_hidden, provided by prototypePeter S. Mazinger
Signed-off-by: Peter S. Mazinger <ps.m@gmx.net> Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
2012-06-15jmp-unwind.c: add hidden _longjmp_unwindPeter S. Mazinger
Signed-off-by: Peter S. Mazinger <ps.m@gmx.net> Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
2012-06-15internals.h: use sysconf(_SC_PAGESIZE) instead of __pagesizePeter S. Mazinger
Rename PAGE_SIZE to __PAGE_SIZE to be sure that we do not get the definition from uClibc_page.h. Signed-off-by: Peter S. Mazinger <ps.m@gmx.net> Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
2012-06-15allocrtsig.c,pthread.c: disable __libc_allocate_rtsig, unusedPeter S. Mazinger
Signed-off-by: Peter S. Mazinger <ps.m@gmx.net> Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
2012-06-15geopt.c, LT new/pthread.c: s/__mempcpy/mempcpy/Peter S. Mazinger
Signed-off-by: Peter S. Mazinger <ps.m@gmx.net> Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
2012-06-15signal.h: disable ssignal and gsignalPeter S. Mazinger
raise.c: only LT new provided gsignal, disable it Signed-off-by: Peter S. Mazinger <ps.m@gmx.net> Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
2012-06-15cleanup fork()Peter S. Mazinger
Keep only fork (and it's hidden variant) and __libc_fork. Common __libc_fork prototype in unistd.h. Get rid of __fork, by changing HIDDEN_JUMPTARGET(__fork) to use fork I can't see the reason to have fork() in libpthread, but kept it for now making __fork static in these files. Signed-off-by: Peter S. Mazinger <ps.m@gmx.net> Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
2012-06-15semaphore.h, uClibc_local_lim.h: make sure SEM_VALUE_MAX is always definedPeter S. Mazinger
LT old and new provided SEM_VALUE_MAX in semaphore.h, NPTL in local_lim.h Make sure to get the same definitions, independently of the fact, that semaphore.h is included or not. Signed-off-by: Peter S. Mazinger <ps.m@gmx.net> Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
2012-06-15semaphore.c: include limits.h before semaphore.hPeter S. Mazinger
else SEM_VALUE_MAX will be undefined Signed-off-by: Peter S. Mazinger <ps.m@gmx.net> Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
2012-06-15make use of jmpbuf-offsets.h and jmpbuf-unwind.hPeter S. Mazinger
Signed-off-by: Peter S. Mazinger <ps.m@gmx.net> Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
2012-06-15move *longjmp related prototypes to setjmp.hPeter S. Mazinger
Provide common prototypes for __longjmp, __libc_longjmp, __libc_siglongjmp _longjmp_unwind, __libc_unwind_longjmp in setjmp.h in preparation for use in LT new Add __longjmp to h8300 and i960 Make common longjmp.c good for NPTL Guard _longjmp_unwind use in sh's longjmp.c for NPTL (I think sh could use the common one) Remove unneeded attribute_noreturn, prototype provides it already Signed-off-by: Peter S. Mazinger <ps.m@gmx.net> Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
2012-06-15signal.h: provide prototype for __libc_sigaction and remove all othersPeter S. Mazinger
Signed-off-by: Peter S. Mazinger <ps.m@gmx.net> Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
2012-06-15do not include libc-internal.hPeter S. Mazinger
it is already included by features.h Signed-off-by: Peter S. Mazinger <ps.m@gmx.net> Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
2012-06-06MIPS: Convert __syscall_error() callers to use $a0 for argumentKevin Cernekee
Some callers passed the first argument in $v0, while others used $a0. Change the callers to use $a0 consistently. Signed-off-by: Kevin Cernekee <cernekee@gmail.com> Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
2012-01-14linuxthreads/signals: do not restore handler for invalid signalMarkos Chandras
Invalid signals have no handlers so when trying to restore the old handler to a bad signal a SIGSEGV occurs. This is because the library tries to store the old handler to an invalid memory area where it things the bad signal lives. URL: https://bugs.busybox.net/show_bug.cgi?id=4640 Signed-off-by: Markos Chandras <markos.chandras@imgtec.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-10-27pthreads: fix build when DNS resolver is not enabled.Bernhard Reutner-Fischer
Resolver state is only available if DNS resolver is enabled. Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com> Signed-off-by: Carmelo Amoroso <carmelo.amoroso@st.com>