Age | Commit message (Collapse) | Author |
|
Sometimes references for these functions show up (like when debugging is
enabled), so add hidden aliases for them if needed.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
|
|
The majority of the byteswap functions are the same across all arches, so
setup a common header to provide definitions if they don't exist. This
allows arches to override only the ones they actually want to implement
with inline assembly.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
|
|
Undo my old mistake. I added UCLIBC_INTERNAL define,
but later I realized _LIBC is doing exactly the same thing.
This change converts all usages of UCLIBC_INTERNAL to _LIBC,
removing all instances of UCLIBC_INTERNAL.
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
|
|
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
|
|
libc/sysdeps/linux/mips/clone.S: Assembler messages:
libc/sysdeps/linux/mips/clone.S:122: Warning: No .frame pseudo-op used in PIC code
libc/sysdeps/linux/mips/clone.S:75: Warning: Pretending global symbol used as branch target is local.
libc/sysdeps/linux/mips/crt1.S: Assembler messages:
libc/sysdeps/linux/mips/crt1.S:134: Warning: No .cprestore pseudo-op used in PIC code
Signed-off-by: Khem Raj <raj.khem@gmail.com>
|
|
These arches are generic C implementations of the byteswap functions, so
rather than keep a useless local copy, use the common C one.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
|
|
The cris/hppa code appears to be easy to convert, so go ahead and do it
for them. Build tested only.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
|
|
A port or two (like hppa) does define ENOTSUP, so don't assume that
everyone needs this fallback define.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
|
|
The INLINE_SYSCALL_NCS() macro was using "res" and "err" as local variable
names, but this caused conflicts with some code (like clock_getres) whose
arguments were named the same.
libc/sysdeps/linux/common/clock_getres.c: In function 'clock_getres':
libc/sysdeps/linux/common/clock_getres.c:15: warning: 'res' is used uninitialized in this function
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
|
|
If an arch (like alpha and others) have no ldso support at all, then there
is no point in attempting to walk loaded modules in the dl-* helper funcs.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
|
|
The latest sanitized linux kernel headers no longer export asm/elf.h, so do
not rely on it anymore.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
|
|
The latest alpha Linux kernel defines __NR_fdatasync like everyone else and
deprecates the older __NR_osf_fdatasync, so support that setup.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
|
|
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
|
|
Tested basic functionality with coreutils and things seem to work. At
least gives us a basis to jump from.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
|
|
This syncs the dirent related functions with the glibc behavior -- rather
than take void pointers everywhere, make the struct dirent pointers
explicit in the API. After all, the functions themselves will cast the
pointers to a dirent structure, so if it isn't as expected, people will
crash.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
|
|
Avoid gcc warnings about #if statements with defines that aren't defined.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
|
|
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
|
|
Reported-by: Denys Vlasenko <vda.linux@googlemail.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
|
|
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
|
|
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
|
|
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
|
|
This patch is a uClibc equivalent of
<http://sourceware.org/ml/libc-ports/2008-11/msg00006.html>, to
compute all syscall arguments on ARM in temporary variables before
loading them into register variables. The principle is as for that
glibc patch; the problem I actually observed was a GCC internal
compiler error building ld.so for Thumb-2.
Signed-off-by: Joseph Myers <joseph@codesourcery.com>
|
|
Signed-off-by: Hideo Saito <saito@densan.co.jp>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
Signed-off-by: Giuseppe Cavallaro <peppe.cavallaro@st.com>
See Linux Kernel commit:
http://git.kernel.org/?p=linux/kernel/git/torvalds/linux-2.6.git;a=commit;h=e08b954c9a140f2062649faec72514eb505f18c3
Signed-off-by: Carmelo Amoroso <carmelo.amoroso@st.com>
|
|
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
|
|
Declare common NCS (non-constant syscall) variants and convert the existing
ports over to this.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
|
|
Generate PIC relocations when __PIC__ is defined rather than
__HAVE_SHARED__ (like other architectures).
Signed-off-by: Peter Griffin <pgriffin@mpc-data.co.uk>
Signed-off-by: Carmelo Amoroso <carmelo.amoroso@st.com>
|
|
Ports missing INLINE_SYSCALL() support need to get fixed, so drop the cruft
keeping them alive since it no longer works with the unification.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
|
|
Unify all the common syscall defines in syscalls-common.h and scrub all
the duplicated code from relevant ports. This should also make converting
existing ports to INLINE_SYSCALL() much easier as they don't have to get
lost in all the unrelated noise, as well as creating new ports.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
|
|
Signed-off-by: Austin Foxley <austinf@cetoncorp.com>
|
|
Signed-off-by: Ron Lee <ron@debian.org>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
|
|
The test here is a constant expression and will compile out.
For platforms that don't need the shift the code gets slightly smaller
and simpler, for those that do the result is unchanged.
Signed-off-by: Ron Lee <ron@debian.org>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
|
|
Once again all of these reduce the noise from gcc-4.4.
Replaces a few more (USE_TLS && HAVE___THREAD) with USE___THREAD while we need
to mess with them for this anyhow.
Signed-off-by: Ron Lee <ron@debian.org>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
|
|
This cuts down on a lot of noise from gcc-4.4
Signed-off-by: Ron Lee <ron@debian.org>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
|
|
The __syscall_error() function stores the errno value in the edx register
before invoking the __set_errno() macro. When using the pthread library
this macro calls thread_self() to determine the errno location, which might
clobber the edx register. The errno value must be stored in a "real"
variable so the compiler can take care of saving/restoring it if necessary.
Signed-off-by: Ingo van Lil <inguin@gmx.de>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
|
|
Make sure each arch has the same complete list to make comparing between
them easier.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
|
|
Signed-off-by: Giuseppe Cavallaro <peppe.cavallaro@st.com>
Signed-off-by: Carmelo Amoroso <carmelo.amoroso@st.com>
|
|
The comments on register usage in ARM memcpy had dest and src the
wrong way round; this patch (originally from Mark Shinwell) corrects
this and adds a note on the return value.
Signed-off-by: Joseph Myers <joseph@codesourcery.com>
|
|
Many Thumb-2 instructions cannot use sp or pc as operands, and the
assembler now diagnoses these. setjmp had one such instruction, movs;
this patch changes it to mov.
Signed-off-by: Joseph Myers <joseph@codesourcery.com>
|
|
When an IT block was changed from having two instructions to having
one, the IT instruction at the start of the block was not updated,
causing memcpy to fail to assemble for Thumb-2; this patch makes the
obvious fix.
Signed-off-by: Joseph Myers <joseph@codesourcery.com>
|
|
The ARM EABI has a document CLIBABI specifying various __aeabi_*
functions and variables to be provided for the use of portable objects
that can be linked with different EABI-conforming C libraries.
__aeabi_stdin, __aeabi_stdout and __aeabi_stderr were missing in
uClibc; this patch (originally from Nathan Froyd and for glibc) adds
them.
Signed-off-by: Joseph Myers <joseph@codesourcery.com>
|
|
The error message should output "fromcode -> tocode" rather than
"tocode -> fromcode". Seems to be a typo due to the order of the func
called:
iconv_t iconv_open(const char *tocode, const char *fromcode);
Signed-off-by: André Goddard Rosa <andre.goddard@gmail.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
|
|
Rather than ripping out the default output format from the linker, include
the big/little endian alternatives for the people who link with bi-endian
toolchains.
URL: http://lists.uclibc.org/pipermail/uclibc/2009-June/042595.html
Signed-off-by: Steve Bennett <steveb@workware.net.au>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
|
|
The POSIX waitid() takes 4 args, but the Linux one takes 5 args, so make
sure we stuff the 5th arg with a NULL. Otherwise garbage gets randomly
passed up and considering this is a pointer, that's baaaad.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
|
|
Also get rid of warning in sparc sigaction
Signed-off-by: Austin Foxley <austinf@cetoncorp.com>
|
|
Signed-off-by: Austin Foxley <austinf@cetoncorp.com>
|
|
This will generate a Scrt1.o that is linked to executabled
when compiled as PIE code (position independent executable) without
requiring relocation in .text section (not allowed on uclibc/sh4).
Signed-off-by: Peter Griffin <pgriffin@mpc-data.co.uk>
Signed-off-by: Filippo Arcidiacono <filippo.arcidiacono@st.com>
|
|
|
|
Collapse __length_dotted into __length_question (the sole user of it).
Make __length_question and __decode_answer static, they are used only once
by only one function.
Delete __decode_question, it is unused.
All in all, four less .o files in libc.a.
Document what __dns_lookup returns (length of the packet).
Propagate packet len into __decode_answer, __length_question, __decode_dotted
and check that we do not use data past the end of the packet.
Rename some variables/parameters to better names (len -> packet_len,
data -> packet etc).
Add mini-doc how DNS packets look like.
Style cleanup.
|
|
while the parent is sharing the stack
|
|
|