Age | Commit message (Collapse) | Author |
|
and shuffle tokens memsetting around.
No obj-code changes.
Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
|
|
__check_pf() function is called from getaddrinfo() and it calls
getifaddrs(), which is too much overhead especially if RSBAC-Net
is enabled. So with this patch __check_pf() is being called only
when AI_ADDRCONFIG hint flag is specified - just when we really
need that check.
Signed-off-by: Alexander Komyagin <komyagin@altell.ru>
Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
|
|
Posix says that canonname should use the text representation of an IP address
when a numerical nodename given
See: http://pubs.opengroup.org/onlinepubs/9699919799/functions/getaddrinfo.html
Signed-off-by: Ed Wildgoose <lists@wildgooses.com>
Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
|
|
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
|
|
Some targets include this implicitly, but pull it in explicitly for those
which don't to fix building for them.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
|
|
The current code will sometimes cast the offset to an unsigned long.
On 32bit systems, that doesn't make much sense since we always know
that the off64_t type is 64bits. So drop the ifdef logic, cast it
to an unsigned 64bit value, and then do the shift.
If the system is 32bits, and the address is still too large, then
there's really nothing we could do about it anyways, so the extra
ifdef logic wasn't helping.
URL: https://bugs.busybox.net/show_bug.cgi?id=3853
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
|
|
Otherwise we get:
/tmp/cc14nHjG.s: Assembler messages:
/tmp/cc14nHjG.s: Error: .size expression for _init does not evaluate to a constant
/tmp/cc14nHjG.s: Error: .size expression for _fini does not evaluate to a constant
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
|
|
glibc has split off the arch-specific flag definitions (like
SFD_NONBLOCK) into <arch>/bits/signalfd.h, so that there are no longer
multiple redundant copies of the entire header file. We will adopt the
same scheme in uClibc.
Special cases are included for: alpha mips sparc
hppa was omitted because it has not been updated in glibc.
All others use the common definition.
Signed-off-by: Kevin Cernekee <cernekee@gmail.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
|
|
glibc has split off the arch-specific flag definitions (like
TFD_NONBLOCK) into <arch>/bits/timerfd.h, so that there are no longer
multiple redundant copies of the entire header file. We will adopt the
same scheme in uClibc.
Special cases are included for: alpha mips sparc
hppa was omitted because it has not been updated in glibc.
All others use the common definition.
Signed-off-by: Kevin Cernekee <cernekee@gmail.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
|
|
glibc has split off the arch-specific flag definitions (like
IN_NONBLOCK) into <arch>/bits/inotify.h, so that there are no longer
multiple redundant copies of the entire header file. We will adopt the
same scheme in uClibc.
Special cases are included for: alpha mips sparc
hppa was omitted because it has not been updated in glibc.
All others use the common definition.
Signed-off-by: Kevin Cernekee <cernekee@gmail.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
|
|
2009-01-30 Ulrich Drepper <drepper@redhat.com>
[BZ #7040]
* sysdeps/unix/sysv/linux/sys/inotify.h: Second parameter of
inotify_rm_watch should have type int.
This change allows us to copy inotify.h verbatim from glibc into uClibc.
Signed-off-by: Kevin Cernekee <cernekee@gmail.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
|
|
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
|
|
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
|
|
Fixes handling of e.g. splice
Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
|
|
The Linux syscall takes 3 args, not 4. We have to process flags in
userspace ourselves.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
|
|
Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
|
|
ARM always provides its own userspace funcs for ioperm/iopl.
They've never had syscalls. So disable the stubs on ARM to
avoid multiple definition errors.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
|
|
arm/{ioperm.c,iopl.c}"
This reverts commit 3bcd031f97d61a8f732d865a0f4248aed2d191ab.
The arm code is supposed to provide its own userspace ioperm/iopl
functions. They've never had system calls for these funcs.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
|
|
Pulled assignments out of ifs, added whitespace around operation symbols.
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
|
|
Future branch extends stubs with ret_enosys_stub.
Resolve conflicts, and use superset of future and current master.
Adjust posix_fadvise* accordingly.
Upon future merge, pick this master version as the final state.
Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
|
|
This fixes the following link failure:
LD libuClibc-0.9.33.so
libc/libc_so.a(stubs.os): In function `sync_file_range':
stubs.c:(.text+0x0): multiple definition of `ioperm'
libc/libc_so.a(ioperm.os):ioperm.c:(.text+0x260): first defined here
libc/libc_so.a(stubs.os): In function `sync_file_range':
stubs.c:(.text+0x0): multiple definition of `iopl'
libc/libc_so.a(iopl.os):iopl.c:(.text+0x0): first defined here
collect2: ld returned 1 exit status
make[1]: *** [lib/libc.so] Error 1
Signed-off-by: Jason Woodward <jason.woodward@timesys.com>
Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
|
|
__libc_once is not available / needed when multithreading support
is not enabled, so authnone_create() calls authnone_create_once()
directly.
When LT.{old,new} is used instead of NPTL, it needs to explicitly
include <bits/libc-lock.h> to get __libc_once to be visible.
Signed-off-by: Carmelo Amoroso <carmelo.amoroso@st.com>
|
|
Some test results:
The longer patch posted at Sun 14:46:24 +0100 made my target system
unbootable. I did not attempt to troubleshoot it, as we are focusing
our efforts on the shorter patch now.
The shorter patch posted at Mon 01:50:27 +0100 is a good start, but it
didn't completely fix the problem for me. I am posting an updated
version with a few changes at the end of this message; the patched
uClibc 0.9.32.1 tree passes both of my test cases.
My changes:
1) Need to break out of the loop on "hard" errors. Otherwise the
library call never returns:
open("/dev/null", O_RDONLY) = 4
dup2(4, 1) = 1
write(1, "hello world\n", 12) = -1 EBADF (Bad file descriptor)
write(1, "hello world\n", 12) = -1 EBADF (Bad file descriptor)
write(1, "hello world\n", 12) = -1 EBADF (Bad file descriptor)
write(1, "hello world\n", 12) = -1 EBADF (Bad file descriptor)
...
2) Move all of the error handling logic back into the "else" clause. In
particular, I believe we do not want to be checking errno unless
__WRITE() had indicated a failure, since the value may be undefined:
if (errno == EINTR
|| errno == EAGAIN
/* do we have other "soft" errors? */
) {
3) Whitespace/indentation consistency.
-- 8< --
From: Denys Vlasenko <vda.linux@googlemail.com>
Currently, uclibc retains buffered data on stdio write errors,
and subsequent fclose and fflush will try to write it out again
(in most cases, in vain).
Which results in something like this:
On Wednesday 26 January 2011 13:21, Baruch Siach wrote:
> Hi busybox list,
>
> I'm running the following command under strace (thanks Rob):
>
> echo 56 > /sys/class/gpio/export
>
> and I see the following output:
>
> write(1, "56\n", 3) = -1 EBUSY (Device or resource busy)
> write(1, "5", 1) = 1
>
> The first EBUSY is OK, since GPIO 56 is already requested. But the second
> write() attempt seems strange, and leads to an unwanted outcome. GPIO 5 gets
> exported.
This patch prevents that.
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Signed-off-by: Kevin Cernekee <cernekee@gmail.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
|
|
A microblaze-specific sys/user.h is needed for (e.g.) strace,
so use this version from glibc.
Signed-off-by: Steve Bennett <steveb@workware.net.au>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
|
|
Pulled assignments out of ifs.
do {...} while (1); is a weird method of writing "loop forever",
thus rewrote it.
No code changes: objdump output is the same.
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
|
|
-r is not available on BSD sed so to keep
compatibility avoid using it.
Signed-off-by: Khem Raj <raj.khem@gmail.com>
|
|
This is a port of glibc's fix by Zack Weinberg as reported
in http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=142312,
and discussed in http://sourceware.org/ml/libc-alpha/2002-04/msg00069.html
and following.
Signed-off-by: Carmelo Amoroso <carmelo.amoroso@st.com>
|
|
This is needed for stat'ing loop devices > 255
since otherwise kernel returns EOVERFLOW becasue
it needs st_rdev/st_dev to be larger than 16bits but
in kernel it uses __old_kernel_stat for stat
syscall which has st_rdev/st_dev as unsigned short
Add a testcase
Signed-off-by: Khem Raj <raj.khem@gmail.com>
|
|
use it
Signed-off-by: Khem Raj <raj.khem@gmail.com>
|
|
Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
|
|
A couple of sig functions are obsolete in SUSv4.
Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
|
|
Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
|
|
Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
|
|
Do not pollute libraries with its own implementation of __aeabi_unwind_cpp_pr1 code.
Just add it to uclibc_nonshared.a archive and share it.
This fixes build issue with static linking of application due to multiple symbol
definition in libgcc_eh-a and libpthread.a or librt.a
Signed-off-by: Carmelo Amoroso <carmelo.amoroso@st.com>
|
|
warning: ISO C90 forbids mixed declarations and code [-Wdeclaration-after-statement]
Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
|
|
Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
|
|
harmless copy'n paste error
Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
|
|
When built without NPTL support (or for a sparc target), the system()
function doesn't conform to its specification. Namely, it uses signal()
to install/save/restore signal handlers, which may break applications
using custom handlers installed with sigaction(). In addition, it resets
the SIGCHLD handler to SIG_DFL instead of blocking the signal, which may
result in "lost" signals if a custom handler was installed.
Fix system() by replacing uses of signal() with appropriate calls to
sigaction() and sigprocmask().
Signed-off-by: Richard Braun <rbraun@sceen.net>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
|
|
No code changes
Signed-off-by: Denys Vlasenko <dvlasenk@redhat.com>
|
|
Avoids warning from -Wunused-function about the alias target that is
only used at link-time.
Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
|
|
RTLD_DEEPBIND is not supported in uclibc
Signed-off-by: Khem Raj <raj.khem@gmail.com>
|
|
If backtrace support is turned on, build raise() and abort() with
unwind info (fixup 4c9b7f3c21ff21c199e54bfad2fdf3445fa4573d).
Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
|
|
Build raise and abort function with dwarf2 info by using
-fasynchronous-unwind-tables to make backtrace() working across a
call to abort.
A scenario where it could be useful is within a signal handler that
wants to dump a backtrace when catching some signal (i.e SIGABRT).
Without having abort & raise built with DWARF2 information, it is not
possible for the libgcc stack unwinder to walk through the call stack
out of the abort/raise function.
Impacts in terms of size are really limited
Current
text data bss dec hex filename
164 0 0 164 a4 ./libpthread/nptl/sysdeps/unix/sysv/linux/raise.os
164 0 0 164 a4 ./libpthread/nptl/sysdeps/unix/sysv/linux/raise.oS
220 24 4 248 f8 ./libc/stdlib/abort.os
With (-fasynchronous-unwind-tables)
text data bss dec hex filename
216 0 0 216 d8 ./libpthread/nptl/sysdeps/unix/sysv/linux/raise.os
216 0 0 216 d8 ./libpthread/nptl/sysdeps/unix/sysv/linux/raise.oS
280 24 4 308 134 ./libc/stdlib/abort.os
Signed-off-by: Carmelo Amoroso <carmelo.amoroso@st.com>
Acked-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
|
|
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
|
|
fixes bogus fgets error check
fixes bogus strlen() < 0 check
switches off buffering regardless of tcgetattr() success
prints newline even on error or if there was no '\n' on input
uses sizeof(buf) instead of PWD_BUFFER_SIZE
Signed-off-by: Denys Vlasenko <dvlasenk@redhat.com>
|
|
The current x86_64 setjmp helpers incur a reloc, so fix that up.
$ readelf -r lib/libc.so.0
...
Relocation section '.rela.plt' at offset 0xb058 contains 10 entries:
Offset Info Type Sym. Value Sym. Name + Addend
000000236010 02a400000007 R_X86_64_JUMP_SLO 000000000000b3c4 __sigsetjmp + 0
...
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
|
|
The pututline func calls getutid, so add a hidden def for
it to avoid plt relocs:
$ readelf -r lib/libc.so.0
...
Relocation section '.rela.plt' at offset 0xb058 contains 11 entries:
Offset Info Type Sym. Value Sym. Name + Addend
000000236000 01cf00000007 R_X86_64_JUMP_SLO 00000000000190ab getutid + 0
...
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
|
|
Some places have opencoded the ARRAY_SIZE macro, so move it to a global
internal location so other places can leverage it.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
|
|
Use CROSS_COMPILE instead of CROSS as other projects are doing
(i.e. kernel, busybox, buildroot).
CROSS is still supported for backward compatibility only
Signed-off-by: Carmelo Amoroso <carmelo.amoroso@st.com>
|
|
On several architectures __NR_ulimit syscall number is currently
defined but it is remapped onto sys_ni_syscall, while on other
architectures they are not longer defined.
So use {get,set}rlimit only to implement ulimit interface.
It fixes LTP ulimit01 test case.
Signed-off-by: Carmelo Amoroso <carmelo.amoroso@st.com>
Acked-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
|