Age | Commit message (Collapse) | Author |
|
0f85b228 used 'filter-pout' instead of 'filter-out'. Fix that.
Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
|
|
Commits 1f6601a and 094d82d introduced the "else ifeq" construct, which
requires GNU make v3.81 or higher. This breaks the build on RHEL4 hosts.
Signed-off-by: Kevin Cernekee <cernekee@gmail.com>
Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
|
|
Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
|
|
See GCC PR47577; TODO: Remove them.
Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
|
|
When a string format is processed and the argument is NULL, this yields
"(null)" regardless of precision. This does not make sense, precision
should not be exceeded. A simple test shows that glibc outputs nothing
if precision is smaller than six and the attached patch implements this
same behaviour.
Consider the not uncommon case of strings implemented like this:
struct string { int len; char *ptr; };
There is often no nultermination and they may be printed like this:
printf("%.*s", string.len, string.ptr);
If len is 0 then ptr may be anything, but NULL is a common value.
Obviously the empty string would be expected, not "(null)".
Signed-off-by: Jones Desougi <jones.desougi@27m.se>
Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
|
|
A number of new address / protocol families have been added over the
years, so sync with Linux 2.6.38-rc3, adding CAN, ISDN, Phonet, Zigbee, ..
which are starting to be used by applications.
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
|
|
Thanks to Nitin Garg for notincing!
Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
|
|
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
|
|
Nios II is not i386 :-)
Signed-off-by: Tobias Klauser <tklauser@distanz.ch>
Signed-off-by: Carmelo Amoroso <carmelo.amoroso@st.com>
|
|
Signed-off-by: Khem Raj <raj.khem@gmail.com>
|
|
harmless copy'n paste error in #error
Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
|
|
Thanks Waldemar Brodkorb for reporting
Signed-off-by: Khem Raj <raj.khem@gmail.com>
|
|
It's been found that on uclibc-based system most of the programs log with
'user' facility despite the calls to openlog() with other facilities explicitly
set. Most but not all. Investigating that I've found that the ones logging with
proper facilities used LOG_NDELAY in openlog(). The problem is that LogFacility
is overwritten in openlog_intern and LOG_USER is passed to it from vsyslog() no
matter what the program set with openlog().
Signed-off-by: Roman I Khimov <khimov@altell.ru>
Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
|
|
closes bug #3037
Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
|
|
Signed-off-by: Khem Raj <raj.khem@gmail.com>
|
|
To compile the quad float emulation library gcc needs
__LONG_DOUBLE_128__ macro defined. Check first, if not
supported then revert to the qp_ops.c stubs
Signed-off-by: Konrad Eisele <konrad@gaisler.com>
Signed-off-by: Khem Raj <raj.khem@gmail.com>
|
|
* libc/sysdeps/linux/sh/sysdep.h: Add LOCAL macro
* libm/sh/sh4/Makefile.arch: Include asm source in the build
* libm/sh/sh4/s_lrintf.S [NEW]: optimised asm lrintf
* libm/sh/sh4/s_lroundf.S [NEW]: optimised asm lroundf
Signed-off-by: Christian Bruel <christian.bruel@st.com>
Signed-off-by: Carmelo Amoroso <carmelo.amoroso@st.com>
|
|
Instead of emitting a warning even when compiling for SH4, stop
compilation with an #error directive when not on SH4 core.
Signed-off-by: Carmelo Amoroso <carmelo.amoroso@st.com>
|
|
This patch fixes a bug in the memcpy that doesn't save/restore
the FR12-FR15 registers (callee save registers in ST40 ABI) while
copying many cache lines with FPU in single paired precision mode
and by using all FPU registers (DR and XD).
Signed-off-by: Giuseppe Cavallaro <peppe.cavallaro@st.com>
Reviewed-by: Carmelo Amoroso <carmelo.amoroso@st.com>
Signed-off-by: Carmelo Amoroso <carmelo.amoroso@st.com>
|
|
strtoq should always return a quad_t and be an alias of strtol on
64 bit and strtoll on 32 bit.
Signed-off-by: Natanael Copa <natanael.copa@gmail.com>
Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
|
|
On x86_64, when WORDSIZE_COMPAT32 is enabled, the ut_tv field
of 'struct utmp' and 'struct utmpx' are defined as two nested structs
instead of being defined as 'struct timeval', so it is not possible to
directly assign the two ut_tv values.
This patch split the assignment by setting each fields (tv_sec, tv_usec)
of the ut_tv filed separately
It is als compatible with 'struct timeval' usage.
Signed-off-by: Carmelo Amoroso <carmelo.amoroso@st.com>
|
|
about implicit declaration of memset in system()
Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
|
|
Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
|
|
Patch attached:
Fix a bug in offset calculations when parsing /etc/hosts in resolv.c.
Formerly a miscalculation meant that having found the correct line, the code
was trashing its own result data.
Signed-off-by: Philip Nye <philipn@engarts.com>
Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
|
|
Sparc-Gcc generates q_xxx intrinsic calls for quad float ("long double")
code. The routines from glibc's glibc-2.9/sysdeps/sparc/sparc32/soft-fp/*
where taken and ported to uclibc.
Signed-off-by: Konrad Eisele <konrad@gaisler.com>
Signed-off-by: Austin Foxley <austinf@cetoncorp.com>
|
|
Fix Microblaze config and makefiles.
Signed-off-by: Steven J. Magnani <steve@digidescorp.com>
Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
|
|
Header files needed to build linuxthreads.old for microblaze.
Signed-off-by: Steven J. Magnani <steve@digidescorp.com>
Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
|
|
Port optimized memcpy/memmove from the kernel.
Signed-off-by: Steven J. Magnani <steve@digidescorp.com>
Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
|
|
Other header files for uClibc compilation.
Signed-off-by: Steven J. Magnani <steve@digidescorp.com>
Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
|
|
Sync kernel header definitions with those used in recent mainline kernels.
Signed-off-by: Steven J. Magnani <steve@digidescorp.com>
Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
|
|
Software floating point for microblaze.
Signed-off-by: Steven J. Magnani <steve@digidescorp.com>
Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
|
|
Fix the microblaze vfork() and clone() implementations.
Add support for clone2().
Signed-off-by: Steven J. Magnani <steve@digidescorp.com>
Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
|
|
Fix the microblaze syscall interface.
Recent mainline kernels no longer carry userland code to invoke syscalls
and microblaze can use the uClibc generic code.
Signed-off-by: Steven J. Magnani <steve@digidescorp.com>
Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
|
|
Rework crt bootstrap to work with the new __uClibc_main(),
and hardwire crt init/fini code since the awk approach to generating it on
the fly doesn't work for microblaze. The output from the gcc 4.1.2 compiler
is scrambled so that the tags expected by the awk script to bracket the
init/fini entry and exit code no longer do.
Signed-off-by: Steven J. Magnani <steve@digidescorp.com>
Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
|
|
Some state and registers are missing from setjmp/longjmp handling.
Signed-off-by: Steven J. Magnani <steve@digidescorp.com>
Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
|
|
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
|
|
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
|
|
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
|
|
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
|
|
An architecture that _may_ have a MMU (and thus implements
the msync syscall), but for which the kernel and uClibc are built as
noMMU, we have a stub for msync.
Thanks to Steven J. Magnani for noticing.
Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
|
|
If there was an error during syscall then after it's completion a3
register holds a non-zero value and v0 holds an actual error code which
should be saved in errno. This can be achieved by calling
__syscall_error with the value from v0 as a parameter. So this value
should be stored in a0, but the appropriate assembly instructions are
missing. Fixed this now by adding "move a0, v0".
I think it was once fixed by 58c5f8ba4cdf62342d05a546d15404cbbb3c4e07
but then something went wrong. Again...
Signed-off-by: Alexander Gordeev <lasaine@lvk.cs.msu.su>
Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
|
|
text data bss dec hex filename
- 318 4 0 322 142 libc/pwd_grp/lckpwdf.o
+ 312 4 0 316 13c libc/pwd_grp/lckpwdf.o
- 166 0 1 167 a7 libc/stdlib/abort.o
+ 157 0 1 158 9e libc/stdlib/abort.o
- 42 0 0 42 2a libc/sysdeps/linux/common/pause.o
+ 27 0 0 27 1b libc/sysdeps/linux/common/pause.o
Signed-off-by: Denys Vlasenko <dvlasenk@redhat.com>
|
|
Signed-off-by: Denys Vlasenko <dvlasenk@redhat.com>
|
|
...or rather, it WILL BE code shrink when gcc become clever enough
to not emit a second, useless XORing of ebx:
31 db xor %ebx,%ebx
85 c0 test %eax,%eax
74 11 je 73 <__GI_sleep+0x73>
31 db xor %ebx,%ebx <=== ?!
Signed-off-by: Denys Vlasenko <dvlasenk@redhat.com>
|
|
__USE_EXTERN_INLINES was unused and had bit-rotted, had to fix it
when it didn't work as intended at first.
text data bss dec hex filename
- 168 0 0 168 a8 libc/unistd/sleep.o
+ 146 0 0 146 92 libc/unistd/sleep.o
Signed-off-by: Denys Vlasenko <dvlasenk@redhat.com>
|
|
text data bss dec hex filename
- 197 0 0 197 c5 libc/unistd/sleep.o
+ 168 0 0 168 a8 libc/unistd/sleep.o
Signed-off-by: Denys Vlasenko <dvlasenk@redhat.com>
|
|
It can be easily reconstructed, since it's obvious
Signed-off-by: Denys Vlasenko <dvlasenk@redhat.com>
|
|
Use less stack by using same "sigset_t set" object for new and saved
signal set, remove redundant clearing of set, and do not save/restore
errno around sigprocmask(SIG_SETMASK) - it never changes it.
While at it, improve comments and make code style consistent
across sleep.c file.
text data bss dec hex filename
- 242 0 0 242 f2 libc/unistd/sleep.o
+ 197 0 0 197 c5 libc/unistd/sleep.o
Signed-off-by: Denys Vlasenko <dvlasenk@redhat.com>
|
|
No code changes according to objdump.
Signed-off-by: Denys Vlasenko <dvlasenk@redhat.com>
|
|
objdump confirms that I did not mess it up.
Signed-off-by: Denys Vlasenko <dvlasenk@redhat.com>
|