| Age | Commit message (Collapse) | Author |
|---|
|
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
|
|
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
|
|
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
|
|
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
|
|
An architecture that _may_ have a MMU (and thus implements
the msync syscall), but for which the kernel and uClibc are built as
noMMU, we have a stub for msync.
Thanks to Steven J. Magnani for noticing.
Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
|
|
If there was an error during syscall then after it's completion a3
register holds a non-zero value and v0 holds an actual error code which
should be saved in errno. This can be achieved by calling
__syscall_error with the value from v0 as a parameter. So this value
should be stored in a0, but the appropriate assembly instructions are
missing. Fixed this now by adding "move a0, v0".
I think it was once fixed by 58c5f8ba4cdf62342d05a546d15404cbbb3c4e07
but then something went wrong. Again...
Signed-off-by: Alexander Gordeev <lasaine@lvk.cs.msu.su>
Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
|
|
text data bss dec hex filename
- 318 4 0 322 142 libc/pwd_grp/lckpwdf.o
+ 312 4 0 316 13c libc/pwd_grp/lckpwdf.o
- 166 0 1 167 a7 libc/stdlib/abort.o
+ 157 0 1 158 9e libc/stdlib/abort.o
- 42 0 0 42 2a libc/sysdeps/linux/common/pause.o
+ 27 0 0 27 1b libc/sysdeps/linux/common/pause.o
Signed-off-by: Denys Vlasenko <dvlasenk@redhat.com>
|
|
Signed-off-by: Denys Vlasenko <dvlasenk@redhat.com>
|
|
...or rather, it WILL BE code shrink when gcc become clever enough
to not emit a second, useless XORing of ebx:
31 db xor %ebx,%ebx
85 c0 test %eax,%eax
74 11 je 73 <__GI_sleep+0x73>
31 db xor %ebx,%ebx <=== ?!
Signed-off-by: Denys Vlasenko <dvlasenk@redhat.com>
|
|
__USE_EXTERN_INLINES was unused and had bit-rotted, had to fix it
when it didn't work as intended at first.
text data bss dec hex filename
- 168 0 0 168 a8 libc/unistd/sleep.o
+ 146 0 0 146 92 libc/unistd/sleep.o
Signed-off-by: Denys Vlasenko <dvlasenk@redhat.com>
|
|
text data bss dec hex filename
- 197 0 0 197 c5 libc/unistd/sleep.o
+ 168 0 0 168 a8 libc/unistd/sleep.o
Signed-off-by: Denys Vlasenko <dvlasenk@redhat.com>
|
|
It can be easily reconstructed, since it's obvious
Signed-off-by: Denys Vlasenko <dvlasenk@redhat.com>
|
|
Use less stack by using same "sigset_t set" object for new and saved
signal set, remove redundant clearing of set, and do not save/restore
errno around sigprocmask(SIG_SETMASK) - it never changes it.
While at it, improve comments and make code style consistent
across sleep.c file.
text data bss dec hex filename
- 242 0 0 242 f2 libc/unistd/sleep.o
+ 197 0 0 197 c5 libc/unistd/sleep.o
Signed-off-by: Denys Vlasenko <dvlasenk@redhat.com>
|
|
No code changes according to objdump.
Signed-off-by: Denys Vlasenko <dvlasenk@redhat.com>
|
|
objdump confirms that I did not mess it up.
Signed-off-by: Denys Vlasenko <dvlasenk@redhat.com>
|
|
Example:
--ppfs->maxposarg;
Verified with objdump that no code is changed
Signed-off-by: Denys Vlasenko <dvlasenk@redhat.com>
|
|
God knows this file is hard to read as-is, some readability improvement
is in order.
Signed-off-by: Denys Vlasenko <dvlasenk@redhat.com>
|
|
We increase line buffer size, reduce MAXALIASES and make sure we don't
segfault when there are too manuy aliases in /etc/protocols.
Signed-off-by: Natanael Copa <natanael.copa@gmail.com>
Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
|
|
Reduce MAXALIASES to something lower. There will probably never be
need for more than 1 alias but we allow a few extra.
While here we alos fix segfault when there are too many aliases.
Signed-off-by: Natanael Copa <natanael.copa@gmail.com>
Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
|
|
Don't try to be smart by dynamically realloc buffersize as it doesn't
work. Instead, be simple and allocate a buffer big enough.
This fixes a memory leak when calling getserv{ent,byname,byport}
multiple times.
To save memory we reduce number of max aliases. We seldomly will need
more than 1 anyways. While here, fix segfault that happened if there
were too many aliases.
Signed-off-by: Natanael Copa <natanael.copa@gmail.com>
Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
|
|
If line is longer then size of given buffer and buffer is not allocated by
the config parser itself, then discard rest of line.
Signed-off-by: Natanael Copa <natanael.copa@gmail.com>
Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
|
|
We must always initialize line pointer since data pointer might
have changed due to a realloc (in getserv.c for example).
Signed-off-by: Natanael Copa <natanael.copa@gmail.com>
Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
|
|
This fixes issue introduced by 72e1a1ce186c39f07282398e2af9eb0253e60f15
This should also fix the following testcase to exit with error rather
than cause an endless loop.
int main(void) {
if (getservbyname("non-existing", "udp") == NULL)
err(1, "getservbyname");
return 0;
}
Reported by Pirmin Walthert
http://lists.uclibc.org/pipermail/uclibc/2010-August/044277.html
Signed-off-by: Natanael Copa <natanael.copa@gmail.com>
Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
|
|
We need to update the parser->line pointer on realloc and do not
initialize the token array til after the potensial realloc in
bb_get_chunk_with_continuation().
While here, also replace a realloc() with malloc() where pointer always
is NULL.
Signed-off-by: Natanael Copa <natanael.copa@gmail.com>
Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
|
|
return value of pipe on success is supposed to be 0
Signed-off-by: Austin Foxley <austinf@cetoncorp.com>
|
|
NPTL library needs both madvise and statfs symbols, that are guarded
by UCLIBC_LINUX_SPECIFIC option. This fix provides these symbols too
when NPTL is used, indipendently by UCLIBC_LINUX_SPECIFIC choice.
Otherwise libpthread link fails as below:
LD libpthread-0.9.32-git.so
libpthread/nptl/libpthread_so.a(pthread_create.oS): In function `__free_tcb':
pthread_create.c:(.text+0x1184): undefined reference to `madvise'
libpthread/nptl/libpthread_so.a(sem_open.oS): In function `__where_is_shmfs':
sem_open.c:(.text+0x764): undefined reference to `statfs'
collect2: ld returned 1 exit status
make: *** [lib/libpthread.so] Error 1
Signed-off-by: Carmelo Amoroso <carmelo.amoroso@st.com>
|
|
For those archs that provide non multiplexed socket calls
it possible to implement the lib C wrappers without calling the
multi-purpose __socketcall. For a subset of these functions that
are cancellation point, it needs to correctly handle cancellation.
Signed-off-by: Francesco Rundo <francesco.rundo@st.com>
Signed-off-by: Carmelo Amoroso <carmelo.amoroso@st.com>
|
|
Signed-off-by: Carmelo Amoroso <carmelo.amoroso@st.com>
|
|
Add canonicalize_file_name function and its related tests.
Required by elfutils and coreutils (readlink).
Signed-off-by: Salvatore Cro <salvatore.cro@st.com>
Signed-off-by: Carmelo Amoroso <carmelo.amoroso@st.com>
|
|
After exploring different prefetch distance-degree combinations
in this new update of the memcpy function, a new loop has been added
for moving many cache lines with an aggressive prefetching schema.
Prefetch has been removed when move few cache line aligned blocks.
As final result, this memcpy gives us the same performances for small
sizes (we already had!) and better numbers for big copies.
In case of SH4-300 CPU Series, benchmarks show a gain of ~20% for sizes
from 4KiB to 256KiB.
In case of the SH4-200, there is a gain of ~40% for sizes bigger than
32KiB.
Signed-off-by: Giuseppe Cavallaro <peppe.cavallaro@st.com>
Signed-off-by: Carmelo Amoroso <carmelo.amoroso@st.com>
|
|
With this patch the movca.l instruction is used within the memset.
The current memset implementation only uses the FPU and there is
an real gain for all the sizes.
Adding the movca.l instruction numbers always are better than the generic code.
There is a big gain for size greater than 64 KiB but number are worst for 4-32KiB
sizes compared with the implementation without movca.l.
Time Memory Bandwidth (Mbytes)
-------------------------------------------------
Generic SH4 SH4
(FPU) (FPU+movca.l)
-------------------------------------------------
512 1143 1998 1596
1 KiB 1273 2567 1915
2 KiB 1350 2993 2128
4-32KiB 1391 3262 2252
64KiB-16MiB 170 186 *830*
Signed-off-by: Giuseppe Cavallaro <peppe.cavallaro@st.com>
Signed-off-by: Carmelo Amoroso <carmelo.amoroso@st.com>
|
|
According to POSIX.1-2008 standard, the following syscalls shall be
cancellation points : waitid, sleep, fdatasync, ppoll.
Further, if generic syscall is not available and stubs are
configured, provide the stub implementation for function.
Signed-off-by: Salvatore Cro <salvatore.cro@st.com>
Signed-off-by: Carmelo Amoroso <carmelo.amoroso@st.com>
|
|
misc: Added support for accessing user accounting database based
on utmpx structure.
Signed-off-by: Salvatore Cro <salvatore.cro@st.com>
Signed-off-by: Carmelo Amoroso <carmelo.amoroso@st.com>
|
|
This patch fixes the following build error:
CC libc/misc/internals/__h_errno_location.os
CC libc/misc/internals/parse_config.os
libc/misc/internals/parse_config.c: In function
'bb_get_chunk_with_continuation':
libc/misc/internals/parse_config.c:77: error: 'PAGE_SIZE' undeclared (first use in this function)
libc/misc/internals/parse_config.c:77: error: (Each undeclared identifier is reported only once
libc/misc/internals/parse_config.c:77: error: for each function it appears in.)
make[2]: *** [libc/misc/internals/parse_config.os] Error 1
Signed-off-by: Abdoulaye Walsimou Gaye <awg@embtoolkit.org>
Signed-off-by: Carmelo Amoroso <carmelo.amoroso@st.com>
|
|
Indeed unistd.h header does export '__getpgid' by default, while
uClibc provide only 'getpgid' implementation. The 'getpgid' symbol
is exported by standard header if __USE_XOPEN_EXTENDED is defined.
This patch alignes uClibc implementation with standard header (matching
with glibc behaviour).
Signed-off-by: Carmelo Amoroso <carmelo.amoroso@st.com>
|
|
The combination of
commit aab4df0fb51660300559f5f29290709db2f7bfee
resolv.c: add support for per thread res_state
commit cca45baf8353d1e338d232f5bdb2d1d6b357f1da
/etc/resolv.conf: support "timeout:n" and "attempts:n" options
.. and NPTL results in broken resolver in very annoying ways.
Now, it seems that most of the uclibc code does not work well
if res_state is TLS variable. Technically, this is the correct thing
to do since this gives proper per-thread resolving behavior, and
it also makes the config options overridable per thread. This
probably what apps expect as glibc does it too.
But alas, most places use _res to sync up static global variables
which results in breakage. It gets more or less randomly selected
which threads options get applied. Also in case of multiple servers
it looks like the retry logic is shared between all threads, e.g.
two concurrent resolutions can make other resolvers skip nameservers
due to shared "last_ns_num".
And finally the timeout/attempts commit breaks the accumulated stuff
horribly. What happens is:
1. multithreaded application startups, initializes resolver,
resolves things just fine
2. resolv.conf gets changed, application calls res_init
after res_init uclibc will call res_sync on all resolver functions
to refresh globals from the TLS variable _res
3. res_init was called only in one thread, so other thread's
_res contains all zeroes (yes, this is correct app usage:
res_init should be called only from one thread)
4. threads not calling res_init get broken resolver due to timeout
being set to zero
Now, one proper solution would be to:
1. make __open_nameservers return the configuration options
2. pass the config options struct to res_sync_func so it can do
the proper overrides from per-thread _res
3. remove the related globals and use locally config options from
__open_nameservers
But technically, the correct thing (as in glibc does this) is:
- res_init increases global "res_init timestamp"
- use _res (or pointer within there) for resolver retries etc.
get proper per-thread behavior
- resolvers functions call "maybe_init" which reinitialize the
TLS'ed resolver state (e.g. reload resolv.conf) if their res_init
timestamp is out dated
As an immediate emergency kludge fix, the following might do:
resolv: fix options handling for TLS _res
If _res is in TLS (NPTL), it might not get initialized. Assume
zeroes mean default values.
Signed-off-by: Timo Teräs <timo.teras@iki.fi>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
|
|
Signed-off-by: Denys Vlasenko <dvlasenk@redhat.com>
|
|
Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
|
|
e.g. getservbyname()
Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
|
|
fgets will happily write over allocated area limits. Adjusted the
buffer size according to how much is already read.
Also increase the maximum default line length, as 80 is slightly
small. It might be better if bb_get_chunk_with_continuation would
reallocate the line buffer if it was not user given.
Signed-off-by: Timo Teräs <timo.teras@iki.fi>
Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
|
|
Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
|
|
Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
|
|
Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
|
|
Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
|
|
Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
|
|
Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
|
|
perusing the config parser
Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
|
|
Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
|
|
Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
Signed-off-by: Henning Heinold <heinold@inf.fu-berlin.de>
|
|
Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
|
