| Age | Commit message (Collapse) | Author |
|---|
|
Busybox internally calls syscall(2).
- in unistd.h defined something like
int syscall(nr, ....)
- in syscall.c (common) implemented as
int syscall(nr, arg1, arg3, arg3, arg4, arg5, arg6)
This will not work, busybox thinks syscall should have varargs calling
conventions. But it doesnt in the uclibc implementation so no args go through.
Most architectures this will work. But on openrisc varargs are all sent on the
stack. Regular args are passed in registers.
Commit message and idea from Stafford Horne <shorne@gmail.com>.
Signed-off-by: Joel Stanley <joel@jms.id.au>
|
|
|
|
Add missing member in struct statfs.
It is used by xfsprogs (f.e. 4.13.1).
Reported-by: Joshua Kinard <kumba@gentoo.org>
|
|
Previously we saved everything, but we only need to save the registers
that are promised to be untouched by the setjmp call.
|
|
|
|
Follow-up of e3d6c8bffe79b2c070bc7a3aabc9d9c65f6b099e
Signed-off-by: Eugene Rudoy <gene.devel@gmail.com>
Signed-off-by: Ralf Friedl <Ralf.Friedl@online.de>
|
|
|
|
It is supported both in the sense of being contained in mips version
of statfs/statfs64 structs and also in the sense that it's filled by
the corresponding kernel syscalls.
It is UNsupported in that sense that it's value is the same as that
of f_bsize (at least on older kernel versions, the oldest version
tested is 2.6.13), s. [1] and [2] for details ([1] is the latest
kernel version as of now, [2] is the oldest kernel version git
history is available for).
[1] https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable.git/tree/fs/statfs.c?h=v4.14-rc7#n64
[2] https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable.git/tree/fs/open.c?h=v2.6.12-rc2#n41
Follow-up of 68de9946e914d8c30dcc6667a059ea59e5b74cac
Signed-off-by: Eugene Rudoy <gene.devel@gmail.com>
Signed-off-by: Ralf Friedl <Ralf.Friedl@online.de>
|
|
Fix iteration over signals, synced with GNU C library code and
pending patches. Issues found when running dhcpcd with hook
scripts. (exit status 127)
Reported-By: kapeka <kapeka@bering-uclibc.de>
|
|
Follow the steps to build c-sky uclibc linux system:
1. git clone https://github.com/c-sky/buildroot.git
2. cd buildroot
3. make qemu_csky_ck810_uclibc_defconfig
4. make
Follow the buildroot/board/qemu/csky/readme.txt to run.
This buildroot toolchain is pre-build, But you can rebuild
the c-sky uclibc-ng alone and install it to the buildroot
sysroot manually.
We'll try our best to improve the uclibc-ng continuously.
Signed-off-by: Guo Ren <ren_guo@c-sky.com>
|
|
|
|
Signed-off-by: Stafford Horne <shorne@gmail.com>
|
|
|
|
According to standards SVID and SYSV.
Modified lgamma calling in case when 'signgam' variable should not be used.
Signed-off-by: Waldemar Brodkorb <wbx@uclibc-ng.org>
|
|
After discussion on the busybox mailinglist.
Reported-by: Ralf Friedl <Ralf.Friedl@online.de>
Signed-off-by: Waldemar Brodkorb <wbx@uclibc-ng.org>
|
|
After discussions on the busybox mailinglist.
Reported-by: Ralf Friedl <Ralf.Friedl@online.de>
Signed-off-by: Waldemar Brodkorb <wbx@uclibc-ng.org>
|
|
sysconf creates a lot of code dependencies.
getpagesize dosen't.
staticly linked code that calls malloc is now much smaller.
Signed-off-by: Waldemar Brodkorb <wbx@uclibc-ng.org>
|
|
|
|
As h8/300 architecture does not use deprecated syscalls
after reintroduction into Linux upstream, this part of
the code in vfork.S is always unused.
|
|
|
|
The recvmmsg and sendmmsg is very important for UDP stream application.
If we only use recvmsg for UDP stream, it will only copy one mtu size
of data in a syscall. And recvmmsg copy as many as you want in a syscall.
So recvmmsg is more efficient,and some applications will depends on the
recvmmsg and sendmmsg, eg: UDP media stream player.
Signed-off-by: Guo Ren <ren_guo@c-sky.com>
|
|
In the test-case of statfs from ltp-testsuite, it pass -1 to 2th
argument. eg: fstatfs(fd , -1)
When uclibc-ng parse the buf32 to buf will cause illegal address
access, the kernel will signal the process with SIGSEGV.
If we pass the -1 directly to the syscall of statfs/fstatfs, kernel
use copy_to_user() to prevent the signal of SIGSEGV and just return
EINVAL.
This is the ltp-testsuite expect.
Signed-off-by: Guo Ren <ren_guo@c-sky.com>
|
|
The current uclibc-ng use 4 arguments, and this will cause
ltp-testsuite's preadv/pwritev case failed.
The syscall of preadv/pwritev in current linux-kernel is 5 arguments:
linux/fs/read_write.c:
SYSCALL_DEFINE5(preadv, unsigned long, fd, const struct iovec __user *, vec,
unsigned long, vlen, unsigned long, pos_l, unsigned long, pos_h)
SYSCALL_DEFINE5(pwritev, unsigned long, fd, const struct iovec __user *, vec,
unsigned long, vlen, unsigned long, pos_l, unsigned long, pos_h)
So just update to 5-args-syscall, and off_t could be 32bit or 64bit.
Signed-off-by: Guo Ren <ren_guo@c-sky.com>
|
|
An issue has been found with current implementation of signal restorer
function in uClibc and how GDB handles it. When debugger information is not
present, everything worked fine, because GDB would use a built-in logic to
determine if function is a signal restorer. However when debugging information
is present, debugger would rely solely on it and wouldn't use ARC-specific
functions to detect signal handler frames. Because debug information for signal restorer is generated
completely by the compiler, it lacks a marker, that identifies this as a
signal frame that requires special handling. While it is possible to insert
that marker via inline assembly, that still doesn't solve the whole problem,
because some other expectations are not met by the debug information - there
is no "nop" in front of the function, needed to fool debugger into thinking
that this was a function call, and references to previous frame information
need to be described manually. The simplest way to fix the problem is just
to make sure that signal restorer function will not have any debug function
at all, which can be done by writing it in assembly.
Alternative, more complex, solution, where debug information for signal
frame is manually defined can be found in
glibc/sysdeps/unix/sysv/linux/x86_64/sigaction.c [1].
[1] https://sourceware.org/git/?p=glibc.git;a=blob;f=sysdeps/unix/sysv/linux/x86_64/sigaction.c;hb=HEAD
Signed-off-by: Anton Kolesov <Anton.Kolesov@synopsys.com>
|
|
In cde74b83f9b2 "ARC: remove special CFLAGS/LDFLAGS handling" we
got rid of CONFIG_ARC_CPU_HS which was used to select ARCv2-specific
implementation of optimized string routines. So now ARCv2-tuned
memset/memcpy/strcmp are not used, instead those for ARC700 used for
both ARC700 and ARCHS.
Without uClibc config option we may only tell which CPU type we're
targeting by built-in defines of GCC. I.e. no more conditional file
inclusion in Makefiles. That leaves us only one option - merge both
implementations in 1 file and use ifdefs.
Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
|
|
Remove enum __ptrace_flags along with the only constant it contains,
PTRACE_SEIZE_DEVEL, from Linux's sys/ptrace.h files.
Following GNU C library commit:
60e2846e2633a990bdf474004a373bde54c0bc5f
|
|
|
|
The function towlower doesn't work with locales different from C.
Issue was introduced in commit: 8cde3a9bf2856dcb9a759dec7ecb04a68e712254
Call to setlocale is needed for correct generation of the table uplow_diff.
Otherwise you receive compile time error "range assumption error" after
uncommenting the call.
Similar problem described here:
http://lists.uclibc.org/pipermail/uclibc/2015-March/048852.html
This commit fix the problem by using int32_t values.
|
|
|
|
No NPTL, no LDSO support.
Bootup with Busybox Ash in Qemu working.
Testuite shows only two failures, but mksh continue/break
support doesn't work.
|
|
|
|
Sync with GNU C library. Found while trying to compile
linux-rdma to uClibc-ng.
Reported-by: Alexey Brodkin <Alexey.Brodkin@synopsys.com>
|
|
All flavors of mkstemp create files with mode S_IRUSR | S_IWUSR, as
per POSIX.1-2008. Make mkostemp64 follow that too instead of creating
files with mode S_IRUSR | S_IWUSR | S_IXUSR.
Signed-off-by: Ignacy Gawędzki <ignacy.gawedzki@green-communications.fr>
|
|
|
|
Remove a lot of unused 64 Bit header stuff.
|
|
As reported by Bering-uClibc project uClibc-ng for x86
generates a segfault on SMP machines when trying to run ntpd.
A small test case is here: https://gist.github.com/ddrown
Use a similar nop instruction as for x86_64 in the code.
Signed-off-by: KP.Kirchdoerfer <kapeka@bering-uclibc.de>
|
|
Signed-off-by: Waldemar Brodkorb <wbx@openadk.org>
|
|
|
|
cleanup unused and unsupported code.
|
|
|
|
|
|
Signed-off-by: Waldemar Brodkorb <wbx@openadk.org>
|
|
If you enable these wrappers, be sure you don't need long double
precision on your embedded device, as these only enables
long double warpper functions to the existing double math
functions. Required to build some software as lvm2.
Signed-off-by: Waldemar Brodkorb <wbx@uclibc-ng.org>
|
|
The included RPC implementation is ipv4 only.
Other C library projects have either deprecated the internal
RPC implementation (GNU C Library) or never implemented such
functionality (musl C Library). The latest rpcbind release (0.2.4)
checks for libtirpc and does not allow to be build with uClibc-ng
RPC without patching. The common use case for RPC nowadays is to
use rpcbind together with nfs-utils to provide NFS server or client
support to a system.
The included RPC implementation does create issues with duplicate
symbol failures when statically compiling with RPC enabled.
|
|
This follows the recommendations outlined in Network Operations Division
Cryptographic Requirements published on wikileaks on March 2017.
We discard more bytes of the first keystream to reduce possibility of
non-random bytes.
This is similar to a change in FreeBSD:
https://svnweb.freebsd.org/base?view=revision&revision=315225
Signed-off-by: Loganaden Velvindron <logan@hackers.mu>
|
|
|
|
|
|
Signed-off-by: Waldemar Brodkorb <wbx@openadk.org>
|
|
|
|
Patch fetched from GNU libc mailinglist.
|
