Age | Commit message (Collapse) | Author |
|
regressions introduced in 1b3025b7352f5e432ffa1c7adc57085ac9092b77
"buildsys: switch libc to kbuild-style"
unistd: Handle !UCLIBC_HAS_GET{, SUB}OPT cases
libc/libc_so.a(getsubopt-susv3.os): In function getsubopt':
getsubopt-susv3.c:(.text+0x0): multiple definition of getsubopt'
libc/libc_so.a(getsubopt.os):getsubopt.c:(.text+0x0):
first defined here.
The solution is to filter out the correct files when
UCLIBC_HAS_GETOPT and UCLIBC_HAS_GETSUBOPT are not defined.
inet: Move INET_RPC_{DIR, OUT} before CSRC_ALL
libc/libc_so.a(rpc_thread.oS): In function __rpc_thread_svc_max_pollfd':
rpc_thread.c:(.text+0x148): undefined reference to svc_max_pollfd'
libc/libc_so.a(rpc_thread.oS): In function __rpc_thread_svc_pollfd':
rpc_thread.c:(.text+0x184): undefined reference to svc_pollfd'
The CSRC_ALL variable uses the INET_RPC_DIR variable which is
initialized later on. We fix this problem by moving the
INET_RCP_{DIR,OUT} definitions before we use them in CSRC_ALL
Signed-off-by: Markos Chandras <markos.chandras@imgtec.com>
Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
|
|
Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
|
|
This drops __signed, __volatile, and __const. Only the latter was
used in the code base, and for uClibc, not consistently. Much of
the code used plain "const" which meant "__const" was useless.
Really, the point of this is to stay in sync with what glibc did.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
|
|
This matches a similar change made to glibc.
No functional changes here.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
|
|
Signed-off-by: Peter S. Mazinger <ps.m@gmx.net>
Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
|
|
Signed-off-by: Peter S. Mazinger <ps.m@gmx.net>
Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
|
|
the generic open, close, waitpid, read, write are good for NPTL too
no good reason to have the same sleep in both libc and libpthread (NPTL)
no good reason to add sigwaitinfo, sigtimedwait and sigwait to libpthread (NPTL)
Signed-off-by: Peter S. Mazinger <ps.m@gmx.net>
Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
|
|
Even if glibc reuses the syscall (bloat), we can reuse the function.
Make sure, that we use it only if it is provided by the syscall
and the function is really around (UCLIBC_HAS_REALTIME disables it),
else we get into a loop.
Signed-off-by: Peter S. Mazinger <ps.m@gmx.net>
Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
|
|
Change CANCELLATION_P macro and adapt usage.
Signed-off-by: Peter S. Mazinger <ps.m@gmx.net>
Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
|
|
Signed-off-by: Peter S. Mazinger <ps.m@gmx.net>
Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
|
|
Signed-off-by: Peter S. Mazinger <ps.m@gmx.net>
Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
|
|
Signed-off-by: Peter S. Mazinger <ps.m@gmx.net>
Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
|
|
Signed-off-by: Peter S. Mazinger <ps.m@gmx.net>
Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
|
|
getrlimit previously was only called for NPTL (why?), fix that to be
used everywhere.
Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
|
|
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
|
|
fixes bogus fgets error check
fixes bogus strlen() < 0 check
switches off buffering regardless of tcgetattr() success
prints newline even on error or if there was no '\n' on input
uses sizeof(buf) instead of PWD_BUFFER_SIZE
Signed-off-by: Denys Vlasenko <dvlasenk@redhat.com>
|
|
Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
|
|
Bug was introduced in revision a202cf6f.
Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
|
|
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
|
|
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
|
|
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
|
|
text data bss dec hex filename
- 318 4 0 322 142 libc/pwd_grp/lckpwdf.o
+ 312 4 0 316 13c libc/pwd_grp/lckpwdf.o
- 166 0 1 167 a7 libc/stdlib/abort.o
+ 157 0 1 158 9e libc/stdlib/abort.o
- 42 0 0 42 2a libc/sysdeps/linux/common/pause.o
+ 27 0 0 27 1b libc/sysdeps/linux/common/pause.o
Signed-off-by: Denys Vlasenko <dvlasenk@redhat.com>
|
|
...or rather, it WILL BE code shrink when gcc become clever enough
to not emit a second, useless XORing of ebx:
31 db xor %ebx,%ebx
85 c0 test %eax,%eax
74 11 je 73 <__GI_sleep+0x73>
31 db xor %ebx,%ebx <=== ?!
Signed-off-by: Denys Vlasenko <dvlasenk@redhat.com>
|
|
__USE_EXTERN_INLINES was unused and had bit-rotted, had to fix it
when it didn't work as intended at first.
text data bss dec hex filename
- 168 0 0 168 a8 libc/unistd/sleep.o
+ 146 0 0 146 92 libc/unistd/sleep.o
Signed-off-by: Denys Vlasenko <dvlasenk@redhat.com>
|
|
text data bss dec hex filename
- 197 0 0 197 c5 libc/unistd/sleep.o
+ 168 0 0 168 a8 libc/unistd/sleep.o
Signed-off-by: Denys Vlasenko <dvlasenk@redhat.com>
|
|
It can be easily reconstructed, since it's obvious
Signed-off-by: Denys Vlasenko <dvlasenk@redhat.com>
|
|
Use less stack by using same "sigset_t set" object for new and saved
signal set, remove redundant clearing of set, and do not save/restore
errno around sigprocmask(SIG_SETMASK) - it never changes it.
While at it, improve comments and make code style consistent
across sleep.c file.
text data bss dec hex filename
- 242 0 0 242 f2 libc/unistd/sleep.o
+ 197 0 0 197 c5 libc/unistd/sleep.o
Signed-off-by: Denys Vlasenko <dvlasenk@redhat.com>
|
|
According to POSIX.1-2008 standard, the following syscalls shall be
cancellation points : waitid, sleep, fdatasync, ppoll.
Further, if generic syscall is not available and stubs are
configured, provide the stub implementation for function.
Signed-off-by: Salvatore Cro <salvatore.cro@st.com>
Signed-off-by: Carmelo Amoroso <carmelo.amoroso@st.com>
|
|
Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
|
|
perusing the config parser
Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
|
|
This likes to break nommu systems.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
|
|
* Use getrlimit for ARG_MAX in sysconf on nptl.
* Define NCARGS directly instead of ARG_MAX
Signed-off-by: Khem Raj <raj.khem@gmail.com>
|
|
Conflicts:
libc/unistd/confstr.c
Signed-off-by: Austin Foxley <austinf@cetoncorp.com>
|
|
Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
|
|
Signed-off-by: Austin Foxley <austinf@cetoncorp.com>
|
|
Conflicts:
libc/misc/utmp/utent.c
libc/sysdeps/linux/i386/bits/syscalls.h
Signed-off-by: Austin Foxley <austinf@cetoncorp.com>
|
|
the NPTL should probably print the version-string of the glibc it's
compatible with and not the uClibc version (check what mysql expects).
Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
|
|
Conflicts:
Makefile.in
extra/Configs/Config.in
libc/sysdeps/linux/common/bits/kernel-features.h
libc/sysdeps/linux/common/poll.c
libc/sysdeps/linux/common/sysdep.h
libc/sysdeps/linux/sh/sysdep.h
Signed-off-by: Austin Foxley <austinf@cetoncorp.com>
|
|
Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
|
|
Signed-off-by: Khem Raj <raj.khem@gmail.com>
|
|
Signed-off-by: Austin Foxley <austinf@cetoncorp.com>
|
|
Plus related synch.
Add a testcase for the sysconf variables based on the one from glibc
Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
|
|
* clock_getcpuclockid, clock_gettime, clock_nanosleep, mq_receive,
mq_send, mq_timedreceive, mq_timedsend, _SC_MONOTONIC_CLOCK
Signed-off-by: Austin Foxley <austinf@cetoncorp.com>
|
|
Signed-off-by: Austin Foxley <austinf@cetoncorp.com>
|
|
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
|
|
sed -i -e '/Experimentally off - /d' $(grep -rl "Experimentally off - " *)
sed -i -e '/^\/\*[[:space:]]*libc_hidden_proto(/d' $(grep -rl "libc_hidden_proto" *)
should be a nop
Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
|
|
Make sure we declare the error properly in case a port uses it, and fix the
invocation of exit(). Since clone() will be returning a pid, assume that
the value will not have the MSB set (negative) to simplify the error test a
bit more. If gcc supports it, force this function to always be heavily
optimized in a bid to avoid stack usage as much as possible.
Signed-off-by: James Coleman <james.coleman@ubicom.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
|
|
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
|
|
Handle O=
Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
|
|
Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
|