| Age | Commit message (Collapse) | Author |
|---|
|
Added 32-bit RISC-V support. I have managed to get 32-bit RISC-V No-MMU
Linux running based on mainstream buildroot. It's nice to have uclibc
support this 32-bit No-MMU target.
There's no substantial code change except definations and config
options.
Signed-off-by: Yimin Gu <ustcymgu@gmail.com>
|
|
Modified config files and crt1.S to support static pie elf generation.
Signed-off-by: linted <linted@users.noreply.github.com>
|
|
Add ability to use optimized versions of string functions for ARCv3 32-bit
CPUs with UCLIBC_HAS_STRING_ARCH_OPT option. Add optimized
memcpy/memset/memcmp code for ARCv3 CPUs based on the code from newlib
and adapt for ARCv3 existed optimized strchr/strcmp/strcpy/strlen.
Link to the Synopsys newlib repo with code for ARCv3 on GitHub:
https://github.com/foss-for-synopsys-dwc-arc-processors/newlib
Signed-off-by: Pavel Kozlov <pavel.kozlov@synopsys.com>
|
|
New ARCv3 ISA includes both 64-bit and 32-bit CPU family.
This patch adds support for 32-bit ARCv3 HS5x processors.
Signed-off-by: Sergey Matyukevich <sergey.matyukevich@synopsys.com>
Signed-off-by: Pavel Kozlov <pavel.kozlov@synopsys.com>
|
|
Add a header file with assembler macros to be able to handle in one
place the differences between ARCv2 and ARCv3 ISAs. It is a preparatory
step before the introduction of support for ARCv3 CPUs.
Signed-off-by: Sergey Matyukevich <sergey.matyukevich@synopsys.com>
Signed-off-by: Pavel Kozlov <pavel.kozlov@synopsys.com>
|
|
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
|
|
on mips
Updated config to allow compilation of rcrt1.o for mips and modified it's crt1.S to perform relocates in __start.
The mips architecture performs relocations differently then most other architectures. reloc_static_pie was rewritten, taking code from dl-startup.c, in order to perfrom the additional relocations. Modifications were made to mips' dl-startup.h to allow for the use of contained macros without including _start definition.
Signed-off-by: linted <linted@users.noreply.github.com>
|
|
on aarch64
Updated config to allow compilation of rcrt1.o for aarch64 and modified it's crt1.S to relocate dynamic section prior to __uClibc_main.
Disabled stack protector when compiling reloc_static_pie.c to avoid TLS access prior to it being setup.
Signed-off-by: linted <linted@users.noreply.github.com>
|
|
There is a real-world usage of RUSAGE_THREAD by the pistache project,
https://github.com/oktal/pistache.
Reported-By: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
|
|
on i386, x86_64, and arm.
This patch adds the generation of rcrt1.o which is used by gcc when compiling with the --static-pie flag.
rcrt1.o differs from crt1.o and Scrt1.o in that it the executable has a dynamic section but no relocations have been performed prior to _start being called.
crt1.o assumes there to be no dynamic relocations, and Scrt1.o has all relocations performed prior to execution by lsdo.
The new reloc_static_pie function handles parsing the dynamic section, and performing the relocations in a architecture agnostic method.
It also sets _dl_load_base which is used when initalizing TLS to ensure loading from the proper location.
This allows for easier porting of static-pie support to additional architectures as only modifications to crt1.S to find the load address are required.
Signed-off-by: linted <linted@users.noreply.github.com>
|
|
Implement getcontext, makecontext, setcontext and swapcontext.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
|
|
This macro exists since Linux 2.6.25 [1] and is defined in glibc
since 2.14 [2] for sparc and most supported architectures.
RLIMIT_RTTIME has been added later for mips [3] and alpha [4].
For example, RLIMIT_RTTIME is needed to build qemu 7.0.0 with
Linux user-land emulation support [5].
[1] https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=78f2c7db6068fd6ef75b8c120f04a388848eacb5
[2] https://sourceware.org/git/?p=glibc.git;a=commitdiff;h=67f86a251e0d36107fe28999281d46e76941c7b9
[3] https://sourceware.org/git/?p=glibc.git;a=commitdiff;h=8969f4df1a526aa60dd0bc1c4736cf02104d4a05
[4] https://sourceware.org/git/?p=glibc.git;a=commitdiff;h=53c2cb7641bd866398156625ef672bbd2d78a0d8
[5] https://git.qemu.org/?p=qemu.git;a=commitdiff;h=244fd08323088db73590ff2317dfe86f810b51d7
Signed-off-by: Romain Naour <romain.naour@gmail.com>
|
|
|
|
Defined in kernel v3.14, commit
aab03e05e8f7 ("sched/deadline: Add SCHED_DEADLINE structures & implementation")
Signed-off-by: Petr Vorel <petr.vorel@gmail.com>
|
|
|
|
|
|
|
|
When MD_FALLBACK_FRAME_STATE_FOR handler in libgcc unwind code checks
the second instruction opcode in __default_rt_sa_restorer function,
it expects to see the following values for ARC cores:
- 0x7ee0781e for ARCv2 LE
- 0x003f226f for ARC700 LE
ARC700 value correspond to trap0 instruction. ARCv2 value corresponds
to the following code:
traps_0
j_s [blink]
However, unlike glibc, uClibc implementation of __default_rt_sa_restorer
for ARC does not have that jump. Hence libgcc unwind code is not able
to recognize signal frame correctly on ARCv2 and completes too early.
This change fixes libgcc unwinding over signal frame on ARCv2 adding
missing jump to __default_rt_sa_restorer.
Signed-off-by: Sergey Matyukevich <sergey.matyukevich@synopsys.com>
|
|
Fixes those two warnings:
In file included from <command-line>:
libc/sysdeps/linux/common/openat64.c:18:33: warning: 'openat64' alias between functions of incompatible types 'int(int, const char *, int, ...)' and 'int(int, const char *, int, mode_t)' {aka 'int(int, const char *, int, unsigned int)'} [-Wattribute-alias=]
18 | strong_alias_untyped(__openat64,openat64)
| ^~~~~~~~
./include/libc-symbols.h:177:31: note: in definition of macro '_strong_alias_untyped'
177 | extern __typeof (aliasname) aliasname __attribute__ ((alias (#name))) __attribute_copy__ (name);
| ^~~~~~~~~
libc/sysdeps/linux/common/openat64.c:18:1: note: in expansion of macro 'strong_alias_untyped'
18 | strong_alias_untyped(__openat64,openat64)
| ^~~~~~~~~~~~~~~~~~~~
libc/sysdeps/linux/common/openat64.c:14:12: note: aliased declaration here
14 | static int __openat64(int fd, const char *file, int oflag, mode_t mode)
| ^~~~~~~~~~
and
CC libc/sysdeps/linux/common/stat.os
libc/sysdeps/linux/common/stat.c: In function 'stat':
libc/sysdeps/linux/common/stat.c:28:40: warning: passing argument 3 of 'fstatat64' from incompatible pointer type [-Wincompatible-pointer-types]
28 | return fstatat64(AT_FDCWD, file_name, buf, 0);
| ^~~
| |
| struct stat *
In file included from libc/sysdeps/linux/common/stat.c:11:
./include/sys/stat.h:258:35: note: expected 'struct stat64 * restrict' but argument is of type 'struct stat *'
258 | struct stat64 *__restrict __buf, int __flag)
| ~~~~~~~~~~~~~~~~~~~~~~~~~~^~~~~
Signed-off-by: Yann Sionneau <ysionneau@kalray.eu>
|
|
Signed-off-by: Yann Sionneau <ysionneau@kalray.eu>
|
|
default
This patch fixes segfault of all user space processes (including init, which caused a panic) on recent buildroot powerpc32 builds.
The issue has been reported by Romain Naour in this thread: https://mailman.uclibc-ng.org/pipermail/devel/2021-May/002068.html
Recent buildroot toolchain enables secure PLT in powerpc gcc.
The latter will then supply -msecure-plt to gas invocations by default.
Recent buildroot also enables PIE by defaults.
For the secure PLT to work in PIC, the r30 register needs to point to the GOT.
Old "bss plt" was just a one-instruction-wide PLT slot, pointed-to by a R_PPC_JMP_SLOT relocation, which was written on-the-fly to contain a branch instruction to the correct address. It therefore had to stay writable.
New secure PLT only contains read-only code which loads the branch address from the writable GOT.
Note: secure PLT without PIC does not need r30 to be set. Because offset between plt stub code and got is known at link-time. In this case the PLT entry looks like:
1009b3e0 <__uClibc_main@plt>:
1009b3e0: 3d 60 10 0e lis r11,4110
1009b3e4: 81 6b 03 74 lwz r11,884(r11)
1009b3e8: 7d 69 03 a6 mtctr r11
1009b3ec: 4e 80 04 20 bctr
Whereas secure PLT with PIC - offset between plt and got is unknown at link-time - looks like this:
000af800 <00000000.plt_pic32.__uClibc_main>:
af800: 81 7e 03 80 lwz r11,896(r30)
af804: 7d 69 03 a6 mtctr r11
af808: 4e 80 04 20 bctr
af80c: 60 00 00 00 nop
Signed-off-by: Yann Sionneau <yann@sionneau.net>
|
|
Since Linux 3.11, O_TMPFILE allows to create unnamed files that can be
linked later on. It is internally defined as (O_TMPFILE | O_DIRECTORY)
to make it fail on old kernels.
Copying definitions from glibc for O_TMPFILE is not enough to support
O_TMPFILE; The open() wrapper also need to pass the mode when the flag
contains O_TMPFILE, otherwise, it will pass mode 000 which will succeed
but yield unexpected results.
openat() is curiously not affected since it passes the mode
unconditionally..
Signed-off-by: Nicolas Cavallari <nicolas.cavallari@green-communications.fr>
|
|
The F_DUPFD_CLOEXEC flag was added in POSIX 2008.09.
Signed-off-by: Paul Cercueil <paul@crapouillou.net>
|
|
|
|
|
|
Building uclibc 1.0.37 for SuperH architecture with linux-headers 5.10.7
fails at libpthread level due to missing time-related data structures,
usually defined by the kernel.
Define those missing data structures in SuperH-specific kernel_types.h.
Context: building for sh4eb-r2d[1] and sh4-r2d[1] boards emulations for
QEMU using the buildroot image generation tool.
Regarding the issue, a patch[3] was already issued in the kernel some
time ago, which aimed to solve precisely this problem. After coming up
with a quick and dirty patch for buildroot modifying Linux headers[4],
some discussion was sparked on the subject with Linux folks[5]. Some
analyzing later, conclusion was that:
1) Previously mentioned patch[4] was fixing the symptom, not the ill
2) SuperH-specific code in uclibc could be patched instead, to solve
the problem for other use cases (e.g. building just a toolchain)
[1] https://git.buildroot.net/buildroot/tree/configs/qemu_sh4eb_r2d_defconfig?h=2020.02.9
[2] https://git.buildroot.net/buildroot/tree/configs/qemu_sh4_r2d_defconfig?h=2020.02.9
[3] https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=fc94cf2092c7c1267fa2deb8388d624f50eba808
[4] https://git.buildroot.net/buildroot/commit/?id=742f37de8d0e3797698411dfc6a63bd7e98aafe2
[5] https://patchwork.kernel.org/project/linux-sh/patch/20210123165652.10884-1-geoffrey.legourrierec@gmail.com/
Signed-off-by: Geoffrey Le Gourriérec <geoffrey.legourrierec@gmail.com>
|
|
This commit adds support for Kalray VLIW family (kvx)
Kalray kv3 core is embedded in Kalray Coolidge SoC. This core which is the
third of the KV family has the following features:
32/64 bits execution mode
6-issue VLIW architecture
64 x 64bits general purpose registers
SIMD instructions
little-endian
In order to build a usable toolchain, build scripts are provided at the
following address: https://github.com/kalray/build-scripts.
Kalray uses FOSS which is available at https://github.com/kalray
This includes Linux kernel, uClibc-ng, gcc, binutils, etc.
Signed-off-by: Clément Léger <cleger@kalray.eu>
Signed-off-by: Guillaume Thouvenin <gthouvenin@kalray.eu>
Signed-off-by: Laurent Thevenoux <lthevenoux@kalray.eu>
Signed-off-by: Marc Poulhies <mpoulhies@kalray.eu>
Signed-off-by: Marius Gligor <mgligor@kalray.eu>
Signed-off-by: Yann Sionneau <ysionneau@kalray.eu>
|
|
Kernel stat/stat64 structure and uClibc-ng ones were not
in sync regarding the timespec fields.
Kernel had them but uClibc did not expose it in some cases.
Man page says that stat struct should have timespec fields if:
* _POSIX_C_SOURCE is defined to 200809L or greater
or
* _XOPEN_SOURCE is defined to 700 or greater
or
* _BSD_SOURCE is defined
or
* _SVID_SOURCE is defined
In the case of buildroot vim build, neither _BSD_SOURCE nor _SVID_SOURCE were defined.
Only _POSIX_C_SOURCE and _XOPEN_SOURCE were defined.
uClibc-ng header only checked for _BSD_SOURCE and _SVID_SOURCE via __USE_MISC.
This patch adds a check to __USE_XOPEN2K8 which is defined
if _POSIX_C_SOURCE >= 200809L or _XOPEN_SOURCE >= 700
This for instance fixes a crash at startup of vim (not the busybox one) on aarch64 and all other
arch where in kernel STAT_HAVE_NSEC is set and where stat.h in uClibc-ng comes from libc/sysdeps/linux/common-generic/bits
Signed-off-by: Yann Sionneau <ysionneau@kalray.eu>
|
|
copied from musl 1.2.1.
Signed-off-by: Petr Vorel <petr.vorel@gmail.com>
|
|
Always use the systemcall as uClibc-ng has no vdso support.
Tested with libffi and python in qemu-system-riscv64.
|
|
Reported-By: akater <nuclearspace@gmail.com>
|
|
Add XCHAL definitions for S32C1I and EXCLUSIVE options to
xtensa-config.h, include it in places that implement atomic operations
and add implementations with exclusive access option opcodes.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
|
|
Replace "a" constraints with "+m" to avoid forcing atomic variable
address into a register and let the compiler use non-zero offset in
load/store opcodes.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
|
|
Rename various spare fields in structs to include a namespace
This should avoid accidental clashes with uses of the __unused symbol
in upstream projects. eg currently it causes a compile error in dhcpcd 8.x
due to their re-use of the __unused symbol as a macro
This follows the style of glibc which does something equivalent
|
|
From [1]
"GCC 10 (PR 91233) won't silently allow registers that are not architecturally
available to be present in the clobber list anymore, resulting in build failure
for mips*r6 targets in form of:
...
.../sysdep.h:146:2: error: the register ‘lo’ cannot be clobbered in ‘asm’ for the current target
146 | __asm__ volatile ( \
| ^~~~~~~
This is because base R6 ISA doesn't define hi and lo registers w/o DSP extension.
This patch provides the alternative definitions of __SYSCALL_CLOBBERS for r6
targets that won't include those registers."
[1] https://sourceware.org/git/?p=glibc.git;a=commit;h=020b2a97bb15f807c0482f0faee2184ed05bcad8
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Cc: Waldemar Brodkorb <wbx@openadk.org>
|
|
|
|
It fixes tst-signal6 and friends.
Signed-off-by: Vladimir Murzin <vladimir.murzin@arm.com>
|
|
It fixes tst-cancel1 and friends.
Signed-off-by: Vladimir Murzin <vladimir.murzin@arm.com>
|
|
It fixes:
FAIL sem got 1 expected 0
failed: incorrect sem_nsems!
semget(IPC_CREAT) = 0
semctl(k) = 0
sem_nsems = 0
for aarch64.
Signed-off-by: Vladimir Murzin <vladimir.murzin@arm.com>
|
|
Similar to glibc commit
https://sourceware.org/git/?p=glibc.git;a=commit;h=6bbfc5c09fc5b5e3d4a0cddbbd4e2e457767dae7
we need to handle Linux kernel change, which removed stat64 family from default syscall set.
Signed-off-by: Waldemar Brodkorb <wbx@openadk.org>
Signed-off-by: Waldemar Brodkorb <wbrodkorb@conet.de>
|
|
Avoid calling select with empty sets which hangs the process
This makes uClibc-ng act like glibc and musl
Without this fix the test_poll of python3 testsuite hangs forever
Scenario of the issue:
If you call poll with only invalid file descriptors, like in python3
testsuite
(https://github.com/python/cpython/blob/master/Lib/test/test_poll.py#L83)
You will go through uClibc poll emulation code, which is based on
select syscall.
Your first call to select will fail, it will return -1 and errno will be
set to EBADF: https://github.com/wbx-github/uclibc-ng/blob/master/libc/sysdeps/linux/common/poll.c#L120
Then you will go through the for loop which tests individually each file descriptor by calling
select on each one: https://github.com/wbx-github/uclibc-ng/blob/master/libc/sysdeps/linux/common/poll.c#L163
each call will also return -1 with errno being equal to EBADF.
Therefore all pollfd will have the POLLNVAL flag in their respective revents field.
And, the most important, rset/wset/xset will stay empty.
Then the for loop ends, the "continue" makes the while loop run again.
The following select() is run again: https://github.com/wbx-github/uclibc-ng/blob/master/libc/sysdeps/linux/common/poll.c#L120
But this time the sets are empty.
If the poll was called with timeout set to -1, this select will hang forever because there is no timeout
and the sets are empty so no event will ever wake it up.
test program:
int main(void)
{
struct pollfd pfd;
int ret;
int pipe_fds[2];
pipe(pipe_fds);
close(pipe_fds[0]);
close(pipe_fds[1]);
pfd.fd = pipe_fds[0];
pfd.events = POLLIN | POLLOUT | POLLPRI;
pfd.revents = 0;
ret = poll(&pfd, 1, -1);
printf("ret: %d\n", ret);
if (ret < 0)
printf("error: %s", strerror(errno));
else {
puts("revents: ");
if (pfd.revents & POLLERR)
printf(" POLLERR");
if (pfd.revents & POLLHUP)
printf(" POLLHUP");
if (pfd.revents & POLLNVAL)
printf(" POLLNVAL");
puts("");
}
return 0;
}
This hangs on uClibc-ng aarch64 and Kalray's arch (kv3) but does the following on musl and glibc:
"
ret: 1
revents:
POLLNVAL
"
strace output of this program with uClibc *without* the patch applied:
pselect6(4, [3], [3], [3], NULL, NULL) = -1 EBADF (Bad file descriptor)
pselect6(4, [3], [3], [3], {tv_sec=0, tv_nsec=0}, NULL) = -1 EBADF (Bad file descriptor)
pselect6(0, 0x7ffffffb80, 0x7ffffffb68, 0x7ffffffb50, NULL, NULL
(never finishes)
strace output of this program with uClibc *with* the patch applied:
pselect6(4, [3], [3], [3], NULL, NULL) = -1 EBADF (Bad file descriptor)
pselect6(4, [3], [3], [3], {tv_sec=0, tv_nsec=0}, NULL) = -1 EBADF (Bad file descriptor)
write(1, "ret: 1\n", 7ret: 1
) = 7
write(1, "revents: \n", 10revents:
) = 10
write(1, " POLLNVAL\n", 10 POLLNVAL
) = 10
exit_group(0) = ?
+++ exited with 0 +++
|
|
Hi,
This diff fixes a typo in the PTRACE_EVENT_SECCOMP event code.
The typo itself was introduced in 2012 when syncing with glibc header
files and was itself fixed in 2013 in the glibc headers.
|
|
basically from or1k port of uClibc-ng, with fixes for structures in
pthreadtypes.h from 64 bit architectures.
18 testsuite failures counted.
|
|
|
|
|
|
|
|
The return type of syscall() is long so __syscall_error, which is jumped
to by syscall handlers to stash an error number into errno, must return
long too otherwhise it returs 4294967295L instead of -1L. For example,
syscall for x86_64 is defined in libc/sysdeps/linux/x86_64/syscall.S as
syscall:
movq %rdi, %rax /* Syscall number -> rax. */
movq %rsi, %rdi /* shift arg1 - arg5. */
movq %rdx, %rsi
movq %rcx, %rdx
movq %r8, %r10
movq %r9, %r8
movq 8(%rsp),%r9 /* arg6 is on the stack. */
syscall /* Do the system call. */
cmpq $-4095, %rax /* Check %rax for error. */
jae __syscall_error /* Branch forward if it failed. */
ret /* Return to caller. */
In libc/sysdeps/linux/x86_64/__syscall_error.c, __syscall_error is
defined as
int __syscall_error(void) attribute_hidden;
int __syscall_error(void)
{
register int err_no __asm__ ("%rcx");
__asm__ ("mov %rax, %rcx\n\t"
"neg %rcx");
__set_errno(err_no);
return -1;
}
So __syscall_error returns -1 as a 32-bit int in a 64-bit register, %rax
(0x00000000ffffffff, whose decimal value is decimal 4294967295) and a
test like this always returns false:
if (syscall(number, ...) == -1)
foo();
Fix the error by making __syscall_error return a long, like syscall().
The problem can be circumvented by the caller by coercing the returned
value to int before comparing it to -1:
if ((int) syscall(number, ...) == -1)
foo();
The same problem probably occurs on other 64-bit systems but so far only
x86_64 was tested, so this change must be considered experimental.
Signed-off-by: Carlos Santos <unixmania@gmail.com>
|
|
(gdb) print offsetof(struct __jmp_buf_tag, __mask_was_saved)
$12 = (int *) 0x1f0
using https://stackoverflow.com/a/39663128/2171120
|
|
Update from linux/arch/sparc/include/uapi/asm/uctx.h
|
|
|
