Age | Commit message (Collapse) | Author |
|
glibc has split off the arch-specific flag definitions (like
IN_NONBLOCK) into <arch>/bits/inotify.h, so that there are no longer
multiple redundant copies of the entire header file. We will adopt the
same scheme in uClibc.
Special cases are included for: alpha mips sparc
hppa was omitted because it has not been updated in glibc.
All others use the common definition.
Signed-off-by: Kevin Cernekee <cernekee@gmail.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
|
|
Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
|
|
Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
|
|
RTLD_DEEPBIND is not supported in uclibc
Signed-off-by: Khem Raj <raj.khem@gmail.com>
|
|
We need to define the rules for .S files so it
gets the include paths some architectures like mips
include headers
Some architectures e.g. SH have their own version
of pt-initfini.c so look for that first before resorting
to generic version of pt-initfini.c
Signed-off-by: Khem Raj <raj.khem@gmail.com>
|
|
Removing them generally was not a good idea
This reverts commit 233c504cd940d9802226b6a3a092368b86978f5e.
|
|
sed -i -e '/\.size[[:space:]]/d' $(grep -l "\.size" libc/sysdeps/linux/*/crt*.[sSc])
Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
|
|
Signed-off-by: Peter S. Mazinger <ps.m@gmx.net>
|
|
STRICT_HEADERS
Remove ucontext.h if SUSV4_LEGACY is not set and fix it's references.
Guard sigstack structure with SUSV4_LEGACY and STRICT_HEADERS.
Disable sigstack function prototype, it is not provided by uClibc.
Signed-off-by: Peter S. Mazinger <ps.m@gmx.net>
|
|
A number of new address / protocol families have been added over the
years, so sync with Linux 2.6.38-rc3, adding CAN, ISDN, Phonet, Zigbee, ..
which are starting to be used by applications.
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
|
|
If there was an error during syscall then after it's completion a3
register holds a non-zero value and v0 holds an actual error code which
should be saved in errno. This can be achieved by calling
__syscall_error with the value from v0 as a parameter. So this value
should be stored in a0, but the appropriate assembly instructions are
missing. Fixed this now by adding "move a0, v0".
I think it was once fixed by 58c5f8ba4cdf62342d05a546d15404cbbb3c4e07
but then something went wrong. Again...
Signed-off-by: Alexander Gordeev <lasaine@lvk.cs.msu.su>
Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
|
|
* Current function is a C protype and PSEUDO macro does not
transfer syscall return parameters to correct argument registers
for a C function. This causes problem with syscalls setting wrong
value for errno when they encounter an error.
* Fixes PR/2089 for mips/nptl
Signed-off-by: Khem Raj <raj.khem@gmail.com>
|
|
Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
|
|
This patch avoid the following build error:
AS libc/sysdeps/linux/mips/vfork.os
In file included from libc/sysdeps/linux/mips/vfork.S:22:
./libc/sysdeps/linux/mips/sysdep.h:41:20: error: regdef.h: No such file
or directory
libc/sysdeps/linux/mips/vfork.S: Assembler messages:
libc/sysdeps/linux/mips/vfork.S:40: Warning: Unrecognized register name `sp'
libc/sysdeps/linux/mips/vfork.S:40: Warning: Bad .frame directive
libc/sysdeps/linux/mips/vfork.S:40: Error: junk at end of line, first
unrecognized character is `s'
libc/sysdeps/linux/mips/vfork.S:44: Error: illegal operands `dsubu
sp,FRAMESZ'
libc/sysdeps/linux/mips/vfork.S:45: Error: bad or irreducible absolute
expression
libc/sysdeps/linux/mips/vfork.S:65: Error: illegal operands `daddu
sp,FRAMESZ'
libc/sysdeps/linux/mips/vfork.S:69: Error: illegal operands `li a0,0x4112'
libc/sysdeps/linux/mips/vfork.S:70: Error: illegal operands `move a1,sp'
libc/sysdeps/linux/mips/vfork.S:73: Error: illegal operands `li
v0,(5000+55)'
libc/sysdeps/linux/mips/vfork.S:78: Error: illegal operands `bnez
a3,.Lerror'
libc/sysdeps/linux/mips/vfork.S:88: Error: illegal operands `dla
t9,__syscall_error'
libc/sysdeps/linux/mips/vfork.S:90: Error: illegal operands `jr t9'
Signed-off-by: Abdoulaye Walsimou Gaye <awg@embtoolkit.org>
Signed-off-by: Austin Foxley <austinf@cetoncorp.com>
|
|
* __ss_aligntype is defined to unsigned long int
Signed-off-by: Khem Raj <raj.khem@gmail.com>
|
|
* When using NPTL get clone.o from nptl.
* Only use vfork if syscall is there.
* Add libc_a_SSRC to LINUX_LIBC_ARCH_OBJ.
* Use CLEAN_* for clean target.
Signed-off-by: Khem Raj <raj.khem@gmail.com>
|
|
The MIPS specific INLINE_SYSCALL macro has been renamed to
INLINE_SYSCALL_NCS with:
763bbf9e9a27426c9be8322dca5ddf2cb4dbc464
syscall: unify part 2: NCS variety
Declare common NCS (non-constant syscall) variants and convert the
existing ports over to this.
This change breaks system calls. The code generated with using of the
new macro does not obey the restartable syscall convention used by the
linux kernel. When it tries to restart the syscall the errno value is
not being replaced by the syscall number.
This causes weird behaviour of the 'ping' command in busybox for
example:
root@OpenWrt:/# ping 192.168.1.254
PING 192.168.1.254 (192.168.1.254): 56 data bytes
64 bytes from 192.168.1.254: seq=0 ttl=128 time=6.292 ms
ping: recvfrom: Function not implemented
64 bytes from 192.168.1.254: seq=1 ttl=128 time=0.719 ms
ping: recvfrom: Function not implemented
64 bytes from 192.168.1.254: seq=2 ttl=128 time=0.489 ms
ping: recvfrom: Function not implemented
64 bytes from 192.168.1.254: seq=3 ttl=128 time=0.486 ms
ping: recvfrom: Function not implemented
64 bytes from 192.168.1.254: seq=4 ttl=128 time=0.487 ms
ping: recvfrom: Function not implemented
64 bytes from 192.168.1.254: seq=5 ttl=128 time=0.939 ms
ping: recvfrom: Function not implemented
64 bytes from 192.168.1.254: seq=6 ttl=128 time=0.971 ms
ping: recvfrom: Function not implemented
64 bytes from 192.168.1.254: seq=7 ttl=128 time=0.488 ms
ping: recvfrom: Funct^C
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
Signed-off-by: Austin Foxley <austinf@cetoncorp.com>
|
|
Signed-off-by: Andreas Schultz <andreas.schultz@gmail.com>
Signed-off-by: Austin Foxley <austinf@cetoncorp.com>
|
|
Signed-off-by: Khem Raj <raj.khem@gmail.com>
|
|
Signed-off-by: Khem Raj <raj.khem@gmail.com>
|
|
relocations.
Make use of macros from sys/asm.h in crt1.S
These two changes are needed for mips nptl to boot once again.
Signed-off-by: Khem Raj <raj.khem@gmail.com>
(cherry picked from commit 9c343fd4030dcd7a52616f365893177dded50346)
Signed-off-by: Carmelo Amoroso <carmelo.amoroso@st.com>
|
|
Signed-off-by: Austin Foxley <austinf@cetoncorp.com>
|
|
Now that the kernel supports MAP_UNINITIALIZE, have the malloc places use
it to get real uninitialized memory on no-mmu systems. This avoids a lot
of normally useless overhead involved in zeroing out all of the memory
(sometimes multiple times).
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
|
|
Conflicts:
Rules.mak
libc/misc/sysvipc/msgq.c
test/Rules.mak
Signed-off-by: Austin Foxley <austinf@cetoncorp.com>
|
|
Signed-off-by: Peter S. Mazinger <ps.m@gmx.net>
Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
|
|
Signed-off-by: Austin Foxley <austinf@cetoncorp.com>
|
|
* vfork impl with support for SAVE_PID, RESTORE_PID
* sysdep.h assembly macros
Signed-off-by: Austin Foxley <austinf@cetoncorp.com>
|
|
Drop the "#ifndef O_CLOEXEC" cruft, enable O_CLOEXEC in most fcntl.h
headers, and import __ASSUME_O_CLOEXEC from glibc.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
|
|
The kernel does not save these registers across system calls. GCC 4.4
has gotten more aggressive about using them for temporary variables, so
this shows up as intermittent crashes if you use a recent compiler.
Signed-off-by: Daniel Jacobowitz <dan@codesourcery.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
|
|
sed -i -e '/Experimentally off - /d' $(grep -rl "Experimentally off - " *)
sed -i -e '/^\/\*[[:space:]]*libc_hidden_proto(/d' $(grep -rl "libc_hidden_proto" *)
should be a nop
Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
|
|
This fixes compilation errors on hosts that turn off long double support
for C99 like powerpc32.
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
|
|
Right now for ARM, MIPS, Xtensa and powerpc posix_fadvise
routines are included conditionally. They should only be
enabled when UCLIBC_HAS_ADVANCED_REALTIME is set. Also fix
code style in powerpc/posix_fadvise64.c
Signed-off-by: Khem Raj <raj.khem@gmail.com>
|
|
Avoid including akefile.commonarch in each Makefile.arch.
Include it instead from Makefile.in just after the arch specific
Makefile.arch
Signed-off-by: Carmelo Amoroso <carmelo.amoroso@st.com>
|
|
I always forget that many arches have their own bits/stat.h ...
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
|
|
Fill out the stat structure so that the nanosecond resolution support is
always available. There is a small code size increase for a few ports
(three additional assignments in xstatconv), but otherwise everything
should remain the same.
While we're here, punt __old_kernel_stat from the few headers that still
define it as it is unused in uClibc and causes compile errors after these
nanosecond changes.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
|
|
libc/sysdeps/linux/mips/clone.S: Assembler messages:
libc/sysdeps/linux/mips/clone.S:122: Warning: No .frame pseudo-op used in PIC code
libc/sysdeps/linux/mips/clone.S:75: Warning: Pretending global symbol used as branch target is local.
libc/sysdeps/linux/mips/crt1.S: Assembler messages:
libc/sysdeps/linux/mips/crt1.S:134: Warning: No .cprestore pseudo-op used in PIC code
Signed-off-by: Khem Raj <raj.khem@gmail.com>
|
|
Declare common NCS (non-constant syscall) variants and convert the existing
ports over to this.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
|
|
Unify all the common syscall defines in syscalls-common.h and scrub all
the duplicated code from relevant ports. This should also make converting
existing ports to INLINE_SYSCALL() much easier as they don't have to get
lost in all the unrelated noise, as well as creating new ports.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
|
|
Make sure each arch has the same complete list to make comparing between
them easier.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
|
|
include/signal.h | 42 +++++++++++++++++++-------------
libc/sysdeps/linux/alpha/bits/signum.h | 19 --------------
libc/sysdeps/linux/common/bits/signum.h | 22 ----------------
libc/sysdeps/linux/hppa/bits/signum.h | 17 ------------
libc/sysdeps/linux/mips/bits/signum.h | 23 +----------------
libc/sysdeps/linux/sparc/bits/signum.h | 20 ---------------
6 files changed, 27 insertions(+), 116 deletions(-)
|
|
Run tested on i386.
|
|
"Bounds Checking Projects... This project has been abandoned"
for four years at least.
|
|
__libc_accept __libc_close __libc_connect __libc_creat __libc_creat64
__libc_fsync __libc_lseek __libc_lseek64 __libc_msync __libc_nanosleep
__libc_open __libc_open64 __libc_pause __libc_read __libc_readv
__libc_recv __libc_recvfrom __libc_recvmsg
__libc_send __libc_sendmsg __libc_sendto
__libc_tcdrain __libc_wait __libc_waitpid __libc_write __libc_writev
They were removed from glibc 1 May 2004:
http://sources.redhat.com/ml/libc-hacker/2004-05/msg00001.html
|
|
|
|
fix _NSIG for it.
better document what's going on in sigaction().
seems to not induce any actual code changes (sans mips).
|
|
|
|
|
|
|
|
|
|
|