Age | Commit message (Collapse) | Author |
|
This patch will re-factor and simplify sysdep headers
handling for nptl branch.
The reason is to use some useful macros in asm code (i.e. ENTRY()) that are available
only into nptl branch because are defined in sysdep.h header under the nptl folder
even if they are not related to NPTL at all (this was likely due to a bad choice done
at the early stage of NPTL porting).
This is a required steps for integrating into master branch some asm code available in
nptl branch for sh4.
The main changes are described below:
nptl/sysdeps/generic/sysdep.h (moved) ---> libc/sysdeps/linux/common/sysdep.h
nptl/sysdeps/arm/sysdep.h (moved) ---> libc/sysdeps/linux/arm/sysdep.h
nptl/sysdeps/sh/sysdep.h ---------------------|
nptl/sysdeps/unix/sh/sysdep.h ----------------|
nptl/sysdeps/unix/sysv/linux/sh/sysdep.h -----|
nptl/sysdeps/unix/sysv/linux/sh/sh4/sysdep.h -|
|(merged) ---> libc/sysdeps/linux/sh
nptl/sysdeps/unix/sysdep.h (deleted)
Similarly the mips and arm sysdep.h should be merged and updated as for sh arch.
Signed-off-by: Carmelo Amoroso <carmelo.amoroso@st.com>
|
|
Signed-off-by: Austin Foxley <austinf@cetoncorp.com>
|
|
Most ports have the same exact mman bit defines, so let's unify things
like the linux kernel has with the asm-generic efforts.
A few ports are left behind as they are non-trivial to merge -- the arch
maintainers can tackle it if they care.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
|
|
* SAVE_PID, RESTORE_PID in vfork.S
* clone.S tweaks to allow for the pid to be reset
Signed-off-by: Austin Foxley <austinf@cetoncorp.com>
|
|
The syscall() impl on aeabi comes from syscall-eabi.S thus we do not
need the generic syscall() impl.
Fixes:
AS libc/sysdeps/linux/arm/syscall-eabi.os
CC libc/sysdeps/linux/common/syscall.os
libc/libc_so.a(syscall.os): In function `syscall':
syscall.c:(.text+0x0): multiple definition of `syscall'
libc/libc_so.a(syscall-eabi.os):(.text+0x0): first defined here
Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
|
|
Drop the "#ifndef O_CLOEXEC" cruft, enable O_CLOEXEC in most fcntl.h
headers, and import __ASSUME_O_CLOEXEC from glibc.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
|
|
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
|
|
sed -i -e '/Experimentally off - /d' $(grep -rl "Experimentally off - " *)
sed -i -e '/^\/\*[[:space:]]*libc_hidden_proto(/d' $(grep -rl "libc_hidden_proto" *)
should be a nop
Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
|
|
This reverts commit b1913a876059949e6c309bafade55e9425ef33fb.
OABI is still a requirement. So we override the common syscall
implementation specifically for arm port.
Signed-off-by: Khem Raj <raj.khem@gmail.com>
|
|
This fixes compilation errors on hosts that turn off long double support
for C99 like powerpc32.
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
|
|
Right now for ARM, MIPS, Xtensa and powerpc posix_fadvise
routines are included conditionally. They should only be
enabled when UCLIBC_HAS_ADVANCED_REALTIME is set. Also fix
code style in powerpc/posix_fadvise64.c
Signed-off-by: Khem Raj <raj.khem@gmail.com>
|
|
Signed-off-by: Khem Raj <raj.khem@gmail.com>
|
|
Avoid including akefile.commonarch in each Makefile.arch.
Include it instead from Makefile.in just after the arch specific
Makefile.arch
Signed-off-by: Carmelo Amoroso <carmelo.amoroso@st.com>
|
|
Fill out the stat structure so that the nanosecond resolution support is
always available. There is a small code size increase for a few ports
(three additional assignments in xstatconv), but otherwise everything
should remain the same.
While we're here, punt __old_kernel_stat from the few headers that still
define it as it is unused in uClibc and causes compile errors after these
nanosecond changes.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
|
|
This patch is a uClibc equivalent of
<http://sourceware.org/ml/libc-ports/2008-11/msg00006.html>, to
compute all syscall arguments on ARM in temporary variables before
loading them into register variables. The principle is as for that
glibc patch; the problem I actually observed was a GCC internal
compiler error building ld.so for Thumb-2.
Signed-off-by: Joseph Myers <joseph@codesourcery.com>
|
|
Declare common NCS (non-constant syscall) variants and convert the existing
ports over to this.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
|
|
Unify all the common syscall defines in syscalls-common.h and scrub all
the duplicated code from relevant ports. This should also make converting
existing ports to INLINE_SYSCALL() much easier as they don't have to get
lost in all the unrelated noise, as well as creating new ports.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
|
|
The test here is a constant expression and will compile out.
For platforms that don't need the shift the code gets slightly smaller
and simpler, for those that do the result is unchanged.
Signed-off-by: Ron Lee <ron@debian.org>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
|
|
This cuts down on a lot of noise from gcc-4.4
Signed-off-by: Ron Lee <ron@debian.org>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
|
|
Make sure each arch has the same complete list to make comparing between
them easier.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
|
|
Many Thumb-2 instructions cannot use sp or pc as operands, and the
assembler now diagnoses these. setjmp had one such instruction, movs;
this patch changes it to mov.
Signed-off-by: Joseph Myers <joseph@codesourcery.com>
|
|
The ARM EABI has a document CLIBABI specifying various __aeabi_*
functions and variables to be provided for the use of portable objects
that can be linked with different EABI-conforming C libraries.
__aeabi_stdin, __aeabi_stdout and __aeabi_stderr were missing in
uClibc; this patch (originally from Nathan Froyd and for glibc) adds
them.
Signed-off-by: Joseph Myers <joseph@codesourcery.com>
|
|
ustat: same, + remove superfluous "conversion"
which does nothing at best, loses high dev bits at worst
i386/bits/kernel_stat.h: update to reflect reality (wider dev_t)
h8300/bits/kernel_stat.h: same
arm/bits/kernel_stat.h: cosmetics to match kernel header to the letter
|
|
and google says only uclibc has it, no users at all.
text data bss dec hex filename
- 229374 1367 11280 242021 3b165 lib/libuClibc-0.9.30-svn.so
+ 229347 1367 11280 241994 3b14a lib/libuClibc-0.9.30-svn.so
|
|
Run tested on i386.
|
|
"Bounds Checking Projects... This project has been abandoned"
for four years at least.
|
|
|
|
__libc_accept __libc_close __libc_connect __libc_creat __libc_creat64
__libc_fsync __libc_lseek __libc_lseek64 __libc_msync __libc_nanosleep
__libc_open __libc_open64 __libc_pause __libc_read __libc_readv
__libc_recv __libc_recvfrom __libc_recvmsg
__libc_send __libc_sendmsg __libc_sendto
__libc_tcdrain __libc_wait __libc_waitpid __libc_write __libc_writev
They were removed from glibc 1 May 2004:
http://sources.redhat.com/ml/libc-hacker/2004-05/msg00001.html
|
|
fix _NSIG for it.
better document what's going on in sigaction().
seems to not induce any actual code changes (sans mips).
|
|
This patch fixes position-independent executables (PIEs) for Thumb-2. In
Thumb assembly, instructions reading pc give a value 4 greater than the
address of the instruction, rather than 8 greater as in ARM mode, so the
offset to the GOT needs to have the right offset. (The Thumb-1 code
already gets this right; it's the code shared by ARM and Thumb-2 that
needs fixing.)
|
|
|
|
Appears to build fine (several .configs tried)
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
(75_all_uClibc-arm-ftruncate64.patch from gentoo)
|
|
Tested successfully on i386..
|
|
|
|
|
|
Repair C89 compliance and severe whitespace-defects while at it.
|
|
in string.h and strings.h. This caught unguarded string ops in
libc/inet/ethers.c __ether_line_w() function.
I will wait for fallout reports for a week or so,
then continue converting more libc_hidden_proto's.
|
|
|
|
- synch F_LINUX_SPECIFIC_BASE related fcntls for all arches
|
|
|
|
|