Age | Commit message (Collapse) | Author |
|
Signed-off-by: Yann Sionneau <ysionneau@kalray.eu>
|
|
default
This patch fixes segfault of all user space processes (including init, which caused a panic) on recent buildroot powerpc32 builds.
The issue has been reported by Romain Naour in this thread: https://mailman.uclibc-ng.org/pipermail/devel/2021-May/002068.html
Recent buildroot toolchain enables secure PLT in powerpc gcc.
The latter will then supply -msecure-plt to gas invocations by default.
Recent buildroot also enables PIE by defaults.
For the secure PLT to work in PIC, the r30 register needs to point to the GOT.
Old "bss plt" was just a one-instruction-wide PLT slot, pointed-to by a R_PPC_JMP_SLOT relocation, which was written on-the-fly to contain a branch instruction to the correct address. It therefore had to stay writable.
New secure PLT only contains read-only code which loads the branch address from the writable GOT.
Note: secure PLT without PIC does not need r30 to be set. Because offset between plt stub code and got is known at link-time. In this case the PLT entry looks like:
1009b3e0 <__uClibc_main@plt>:
1009b3e0: 3d 60 10 0e lis r11,4110
1009b3e4: 81 6b 03 74 lwz r11,884(r11)
1009b3e8: 7d 69 03 a6 mtctr r11
1009b3ec: 4e 80 04 20 bctr
Whereas secure PLT with PIC - offset between plt and got is unknown at link-time - looks like this:
000af800 <00000000.plt_pic32.__uClibc_main>:
af800: 81 7e 03 80 lwz r11,896(r30)
af804: 7d 69 03 a6 mtctr r11
af808: 4e 80 04 20 bctr
af80c: 60 00 00 00 nop
Signed-off-by: Yann Sionneau <yann@sionneau.net>
|
|
|
|
This commit adds support for Kalray VLIW family (kvx)
Kalray kv3 core is embedded in Kalray Coolidge SoC. This core which is the
third of the KV family has the following features:
32/64 bits execution mode
6-issue VLIW architecture
64 x 64bits general purpose registers
SIMD instructions
little-endian
In order to build a usable toolchain, build scripts are provided at the
following address: https://github.com/kalray/build-scripts.
Kalray uses FOSS which is available at https://github.com/kalray
This includes Linux kernel, uClibc-ng, gcc, binutils, etc.
Signed-off-by: Clément Léger <cleger@kalray.eu>
Signed-off-by: Guillaume Thouvenin <gthouvenin@kalray.eu>
Signed-off-by: Laurent Thevenoux <lthevenoux@kalray.eu>
Signed-off-by: Marc Poulhies <mpoulhies@kalray.eu>
Signed-off-by: Marius Gligor <mgligor@kalray.eu>
Signed-off-by: Yann Sionneau <ysionneau@kalray.eu>
|
|
SEND_STDERR_DEBUG does nothing if __SUPPORT_LD_DEBUG_EARLY__ is not defined
thus causing a warning.
Fixes this:
In file included from ldso/ldso/ldso.c:86:0:
ldso/ldso/dl-startup.c: In function '_dl_start':
ldso/ldso/dl-startup.c:313:13: warning: variable 'strtab' set but not used [-Wunused-but-set-variable]
char *strtab;
^~~~~~
Signed-off-by: Yann Sionneau <ysionneau@kalray.eu>
|
|
Fixes the following compilation warning for 64-bit arch with TLS support:
CC ldso/libdl/libdl.oS
ldso/libdl/libdl.c: In function 'do_dlsym':
ldso/libdl/libdl.c:739:59: warning: cast from pointer to integer of different size [-Wpointer-to-int-cast]
ret = _dl_tls_symaddr ((struct link_map *)sym_ref.tpnt, (Elf32_Addr)ret);
^
|
|
|
|
Before this commit tst-tls-at-ctor test would segfault.
After it passes.
testsuite run before: https://pastebin.com/504JgQXa
testsuite run after: https://pastebin.com/d2aNciVt
Stafford Horne already fixed it in glibc:
* https://github.com/openrisc/or1k-glibc/blob/bcd87396ebe78228645c0731b06c934dfd88855a/sysdeps/or1k/dl-machine.h#L298
* https://github.com/openrisc/or1k-glibc/blob/bcd87396ebe78228645c0731b06c934dfd88855a/sysdeps/or1k/dl-machine.h#L99
|
|
Similar to glibc commit
https://sourceware.org/git/?p=glibc.git;a=commit;h=6bbfc5c09fc5b5e3d4a0cddbbd4e2e457767dae7
we need to handle Linux kernel change, which removed stat64 family from default syscall set.
Signed-off-by: Waldemar Brodkorb <wbx@openadk.org>
Signed-off-by: Waldemar Brodkorb <wbrodkorb@conet.de>
|
|
basically from or1k port of uClibc-ng, with fixes for structures in
pthreadtypes.h from 64 bit architectures.
18 testsuite failures counted.
|
|
|
|
|
|
|
|
Support EM_CSKY 252 elf format.
Changelog:
Increase EM_NUM to 253
Signed-off-by: Guo Ren <ren_guo@c-sky.com>
Signed-off-by: Mao Han <han_mao@c-sky.com>
|
|
* ldso/ldso/arm/aeabi_read_tp.S: Add Thumb version.
* ldso/ldso/arm/dl-startup.h: Do not force ARM encoding, adjust
for Thumb.
* ldso/ldso/arm/resolve.S: Force Thumb encoding on Thumb-only
processors.
* libc/sysdeps/linux/arm/crt1.S: Do not force ARM encoding, adjust
for Thumb.
Signed-off-by: Mickaël Guêné <mickael.guene@st.com>
Signed-off-by: Christophe Lyon <christophe.lyon@st.com>
|
|
[1] fixes clash of TLS variables on ARC and since LD now calculates relocations
a bit different now we need to update dynamic loader as well otherwise relocs
will be calculated improperly.
Note this is an ABI change and should go in-line with corresponding ARC tools.
That said either arc-2018.09 (to be released in few weeks) or the next version of upstream
Binutils (2.32) are required for normal TLS work on ARC.
Testcase:
----------------------------------8<-------------------------------
#include <stdio.h>
int foo3(void);
int foo1(void);
#ifdef _SHARED
int foo1(){
static __thread int val3=1;
val3 += 2;
return val3;
}
#elif _SHARED2
int foo3(){
static __thread int val2=0;
val2 += 2;
return val2;
}
#else
int main(){
printf("foo1 = %d \n", foo1());
printf("foo3 = %d \n", foo3());
return 0;
}
#endif
--------------------------------->8---------------------------------------
The result shoud be:
----8<----
foo1 = 3
foo3 = 2
---->8----
Commands to build artefacts:
----------------------------------------8<-------------------------------
arc-linux-gcc -fPIE -ffunction-sections -fdata-sections -pthread -Os \
-fPIC -o testtls.o -D_SHARED -c tst.c
arc-linux-gcc -fPIE -ffunction-sections -fdata-sections -pthread -Os \
-fPIC -o testtls2.o -D_SHARED2 -c tst.c
arc-linux-gcc -shared -o libtesttls.so testtls.o testtls2.o -lm -Os
arc-linux-gcc tst.c -o tst.out -L./ -ltesttls -Os -fPIE
--------------------------------->8---------------------------------------
Add path to libtesttls.so file to LD_LIBRARY_PATH before runnig
tst.out application.
[1] https://sourceware.org/git/gitweb.cgi?p=binutils-gdb.git;a=commit;h=714e9a954a2e4123dcb26bb8da850e1344de4f5f
Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
Signed-off-by: Evgeniy Didin <didin@synopsys.com>
CC: Cupertino Miranda <cmiranda@synopsys.com>
CC: Vineet Gupta <vgupta@synopsys.com>
CC: Waldemar Brodkorb <wbx@uclibc-ng.org>
|
|
R_ARM_NONE contains no data, so avoid dereferencing it.
* ldso/ldso/arm/elfinterp.c (_dl_do_reloc): Handle R_ARM_NONE
relocation
(_dl_do_reloc_lazy): Likewise.
Signed-off-by: Mickaël Guêné <mickael.guene@st.com>
Signed-off-by: Christophe Lyon <christophe.lyon@st.com>
|
|
dlclose can crash or stuck the system:
When calling dlclose() then system can crash or freeze, because
htab_delete() in ldso/ldso/fdpic/dl-inlines.h uses size_t for i which
is a typedef to unsigned int. We exit the loop on negative value of i
which can never occur since i is an unsigned int. This leads to random
free of various pointers that kill the system.
* ldso/include/inline-hashtab.h (htab_delete): Change type of 'i' to int.
Signed-off-by: Mickaël Guêné <mickael.guene@st.com>
Signed-off-by: Christophe Lyon <christophe.lyon@st.com>
|
|
Make _dl_initial_error_catch_tsd hidden, such that we do not need a
FUNCDESC relocation when initializing _dl_error_catch_tsd.
* ldso/ldso/dl-tls.c (_dl_initial_error_catch_tsd): Declare hidden.
Signed-off-by: Mickaël Guêné <mickael.guene@st.com>
Signed-off-by: Christophe Lyon <christophe.lyon@st.com>
|
|
rtld must call _dl_find_hash() with ELF_RTYPE_CLASS_DLSYM since we
want a function descriptor.
* ldso/ldso/ldso.c (_dl_get_ready_to_run): Support __FDPIC__.
Signed-off-by: Mickaël Guêné <mickael.guene@st.com>
Signed-off-by: Christophe Lyon <christophe.lyon@st.com>
|
|
Otherwise we have link errors because of unresolved refs in libgcc.a:
ld: /lib/gcc/arm-none-uclinuxfdpiceabi/9.0.0/libgcc.a(pr-support.o): in function `_Unwind_GetDataRelBase':
/libgcc/config/arm/pr-support.c:378: undefined reference to `abort'
ld: /lib/gcc/arm-none-uclinuxfdpiceabi/9.0.0/libgcc.a(unwind-arm.o): in function `unwind_phase2_forced':
/libgcc/unwind-arm-common.inc:511: undefined reference to `memcpy'
* ldso/ldso/Makefile.in (CFLAGS-rtld): Always use
-fno-unwind-tables -fno-asynchronous-unwind-tables on arm
Signed-off-by: Christophe Lyon <christophe.lyon@st.com>
|
|
Add support for R_ARM_FUNCDESC_VALUE and implement _dl_linux_resolver
for FDPIC on ARM.
* ldso/ldso/arm/elfinterp.c (_dl_linux_resolver): Support __FDPIC__.
(_dl_do_lazy_reloc): Likewise.
* ldso/ldso/arm/resolve.S (_dl_linux_resolve): Likewise.
Signed-off-by: Mickaël Guêné <mickael.guene@st.com>
Signed-off-by: Christophe Lyon <christophe.lyon@st.com>
|
|
* ldso/ldso/dl-elf.c (_dl_load_elf_shared_library): Fix
l_tls_initimage computation.
* ldso/ldso/ldso.c (_dl_get_ready_to_run): Likewise.
Signed-off-by: Mickaël Guêné <mickael.guene@st.com>
Signed-off-by: Christophe Lyon <christophe.lyon@st.com>
|
|
In ARM_EABI mode, the pread64 syscall parameters are aligned on
64-bits. This syscall is used in rtld when processing FDPIC
relocations.
* ldso/include/dl-syscall.h (__syscall_pread): Fix definition.
(__dl_pread): Fix syscall invocation.
* ldso/ldso/fdpic/dl-sysdep.h (__DL_PREAD): Handle __NR_pread64.
Signed-off-by: Mickaël Guêné <mickael.guene@st.com>
Signed-off-by: Christophe Lyon <christophe.lyon@st.com>
|
|
Implement _start: compute parameters for __self_reloc, and give
control to the user program.
* ldso/ldso/arm/dl-startup.h: Implement _start for __FDPIC__.
Signed-off-by: Mickaël Guêné <mickael.guene@st.com>
Signed-off-by: Christophe Lyon <christophe.lyon@st.com>
|
|
* ldso/ldso/ldso.c (_start): Fix definition for __FDPIC__.
Signed-off-by: Mickaël Guêné <mickael.guene@st.com>
Signed-off-by: Christophe Lyon <christophe.lyon@st.com>
|
|
Add FDPIC dynamic relocations support, similar to what other FDPIC
targets do.
Lazy binding is implemented in a folllow-up patch.
Disable the SEND* macros because they involve relocations to
access constant strings that are unsupported by the existing
arm version.
Define DL_START, START, ARCH_NEEDS_BOOTSTRAP_RELOCS,
DL_CHECK_LIB_TYPE similarly to what other FDPIC targets do.
Define raise() because _dl_find_hash references __aeabi_uidivmod,
which uses __aeabi_idiv0 which in turn references raise.
* include/elf.h (R_ARM_FUNCDESC): Define.
(R_ARM_FUNCDESC_VALUE): Define.
* ldso/include/dl-string.h (SEND_STDERR, SEND_ADDRESS_STDERR)
(SEND_NUMBER_STDERR): Define empty for __FDPIC__.
* ldso/ldso/arm/dl-inlines.h: New file.
* ldso/ldso/arm/dl-startup.h (PERFORM_BOOTSTRAP_RELOC): Fix type
of load_addr. Fix handling of R_ARM_RELATIVE, add support for
R_ARM_FUNCDESC_VALUE.
(DL_START, START): Define for __FDPIC__.
(raise): Define.
* ldso/ldso/arm/dl-sysdep.h (ARCH_NEEDS_BOOTSTRAP_RELOCS): Define.
(DL_CHECK_LIB_TYPE): Define.
(elf_machine_type_class): Take into account FDPIC related
relocations.
(elf_machine_load_address): Support __FDPIC__.
(elf_machine_relative): Likewise.
* ldso/ldso/arm/elfinterp.c (_dl_linux_resolver): Dummy support
for __FDPIC__, implemented in a later patch.
(_dl_do_reloc): Fix reloc_adr computation for __FDPIC__, fix
handling of local symbols. Fix handling of R_ARM_RELATIVE, add
support for R_ARM_FUNCDESC_VALUE, R_ARM_FUNCDESC.
* ldso/ldso/arm/resolve.S: Make _dl_linux_resolve hidden.
* ldso/ldso/fdpic/dl-inlines.h (htab_delete): Declare.
* libc/sysdeps/linux/arm/bits/elf-fdpic.h: New file, similar to bfin's.
* libc/sysdeps/linux/arm/crtreloc.c: Likewise.
* libc/sysdeps/linux/arm/find_exidx.c (__dl_addr_in_loadaddr) Define.
(find_exidx_callback): Support __FDPIC__.
Signed-off-by: Mickaël Guêné <mickael.guene@st.com>
Signed-off-by: Christophe Lyon <christophe.lyon@st.com>
|
|
Like for other FDPIC targets, add defined(__FDPIC__) where needed.
* include/link.h: Include bits/elf-fdpic.h if __FDPIC__ is defined.
(link_map): Use elf32_fdpic_loadaddr if __FDPIC__ is defined.
(dl_phdr_info): Likewise.
* ldso/include/dl-elf.h (__dl_parse_dynamic_info): Support
__FDPIC__.
* ldso/include/dl-hash.h (elf_resolve): Add funcdesc_ht field if
__FDPIC__ is defined.
* ldso/ldso/dl-hash.c (_dl_find_hash): Support __FDPIC__.
* libc/misc/elf/dl-iterate-phdr.c (dl_iterate_phdr): Support __FDPIC__.
Signed-off-by: Mickaël Guêné <mickael.guene@st.com>
Signed-off-by: Christophe Lyon <christophe.lyon@st.com>
|
|
Without MMU, we cannot mark memory regions as read-only.
* ldso/ldso/dl-elf.c (_dl_protect_relro): Do nothing if
__ARCH_USE_MMU__ is defined.
Signed-off-by: Christophe Lyon <christophe.lyon@st.com>
|
|
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
|
|
These assembler functions seem to be unused/referenced, so we can remove
them completely.
Signed-off-by: Florian La Roche <Florian.LaRoche@googlemail.com>
|
|
Fix problem which might exist since 2011. We need to execute
the destructors for all dependant libraries, before munmap the
shared libraries, otherwise running destructor of a dependent library
might cause a segfault, trying to access an already unmapped memory.
This fixes for example segfaults while running php -m with ldap
module.
Reported-By: Dave Flogeras <dflogeras2@gmail.com>
Tested-By: Dave Flogeras <dflogeras2@gmail.com>
|
|
Revert 35105679b9a900d58dadd0852e679c235f8176ba and add some debug
code.
|
|
|
|
|
|
The munmap was still called with broken length, as sometimes
start was empty. This finally solves segfaults when running
php -m with ldap module activated.
|
|
|
|
|
|
|
|
This reverts commit bf4c2d242f587700e3eb2ffd5721ddaf3cdbc7e5.
|
|
There is a patch included in https://bugs.busybox.net/show_bug.cgi?id=6158
from 2013, which was never applied.
This really fixes the php -m segfaults.
|
|
This reverts commit 952bb00f0b2eb576b0bf48c4f87018429a42e28d.
And adds this fix for 64 Bit systems.
http://lists.busybox.net/pipermail/uclibc/2014-December/048737.html
|
|
Sync with GNU C library and consolidate duplicate non
architecture specific defines.
MAP_UNINITIALIZED is only defined to 0x4000000 and used by
the Linux kernel when CONFIG_MMAP_ALLOW_UNINITIALIZED is enabled.
CONFIG_MMAP_ALLOW_UNINITIALIZED is only available for nommu.
See Documentation/nommu-mmap.txt.
|
|
R_XTENSA_TLSDESC_ARG is a true RELA relocation, the addend is in the
relocation record itself, not in place.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
|
|
There are multiple errors in _dl_tlsdesc_dynamic:
- the reference C implementation should return pointer to the
thread-local variable, not offset from the thread pointer, because the
xtensa ABI expects TLSDESC_FN to return pointer to the TLS variable;
- addx8 used for indexing into dtv has its second and third registers in
wrong order, the index must be multiplied by 8, not the base;
- the same addx8 uses wrong base: instead of dtv it adds the offset to
the threadptr;
- the return value in the fast path is calculated as
td->tlsinfo.ti_offset - __builtin_thread_pointer, not what was
intended;
- both fast and slow paths should not subtract __builtin_thread_pointer
from the result.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
|
|
Sync with GNU C library commit:
commit a68ba2f3cd3cbe32c1f31e13c20ed13487727b32
Author: Szabolcs Nagy <szabolcs.nagy@arm.com>
Date: Wed Oct 18 17:26:23 2017 +0100
Fixes issues with binutils version > 2.29.1.
|
|
Port over NPTL/TLS support from GNU C Library.
In the first step only the slower syscall is used for TLS
access. The uClibc-ng testsuite shows 79 errors, so their
is room for bugfixes and improvements.
|
|
Signed-off-by: Guo Ren <ren_guo@c-sky.com>
|
|
Follow the steps to build c-sky uclibc linux system:
1. git clone https://github.com/c-sky/buildroot.git
2. cd buildroot
3. make qemu_csky_ck810_uclibc_defconfig
4. make
Follow the buildroot/board/qemu/csky/readme.txt to run.
This buildroot toolchain is pre-build, But you can rebuild
the c-sky uclibc-ng alone and install it to the buildroot
sysroot manually.
We'll try our best to improve the uclibc-ng continuously.
Signed-off-by: Guo Ren <ren_guo@c-sky.com>
|
|
Signed-off-by: Alex Potapenko <opotapenko@gmail.com>
Signed-off-by: Waldemar Brodkorb <wbx@uclibc-ng.org>
|