summaryrefslogtreecommitdiff
path: root/ldso
AgeCommit message (Collapse)Author
2024-01-18c6x: fix duplicate includeWaldemar Brodkorb
2023-12-12elf: support ELF binaries in noMMUGreg Ungerer
The Linux kernels ELF-FDPIC binfmt program loader can support loading and running conventional ELF format binaries on noMMU kernels when compiled appropriately. That is when they are constant displacement binaries such as generated using the -pie compile option. Add a configure option to allow selecting ELF binary support in noMMU mode configurations on architectures that support this. The main requirement is to generate the ldso run-time loader to perform relocation at load time. These configurations do not support shared libraries, so there is no need to generate a full shared library, only the static version is required. The use of ELF format binaries does mean a slightly simpler toolchain generation (does not require a -uclinux- for some architectures) and does not require an extra tool like elf2flt. This initial support targets M68K, ARM and RISC-V architectures. No kernel changes are required, the required support for this is already in mainline kernels (certainly as of linux-6.6). Note that for the M68K and ARM architectures that the initialized registers and stack layout at process startup is slightly different for the flat format loader and the ELF/ELF-FDPIC loaders. So we need some changes to the startup code (crt1.S) for them. I have not done extensive testing outside of M68K, ARM and RISC-V. I had to make changes to a couple of the dl-startup.h architecture files to get them to build for this noMMU case. I did not dig down too deep on the reasons, but they still seem ok for the MMU case as well. Signed-off-by: Greg Ungerer <gerg@linux-m68k.org>
2023-09-23aarch64: disable lazy relocationsWaldemar Brodkorb
Fixes segfaults in curl with gnutls encryption.
2023-08-14c6x compile fix vdso supportlordrasmus
2023-08-14vdso support missing filelordrasmus
2023-08-14add vsdo supportlordrasmus
2022-12-19add getauxval() implementationramin
2022-09-27arc: add support for ARCv3 32-bit processorsSergey Matyukevich
New ARCv3 ISA includes both 64-bit and 32-bit CPU family. This patch adds support for 32-bit ARCv3 HS5x processors. Signed-off-by: Sergey Matyukevich <sergey.matyukevich@synopsys.com> Signed-off-by: Pavel Kozlov <pavel.kozlov@synopsys.com>
2022-09-27arc: add asm macrosSergey Matyukevich
Add a header file with assembler macros to be able to handle in one place the differences between ARCv2 and ARCv3 ISAs. It is a preparatory step before the introduction of support for ARCv3 CPUs. Signed-off-by: Sergey Matyukevich <sergey.matyukevich@synopsys.com> Signed-off-by: Pavel Kozlov <pavel.kozlov@synopsys.com>
2022-09-27ldso: arc: add compiler option checkSergey Matyukevich
Option '-mno-long-calls' is not supported by all arc gcc compilers. For instance, this option is not supported by GCC for ARCv3 processors. Check if this option is supported before applying it. Signed-off-by: Sergey Matyukevich <sergey.matyukevich@synopsys.com> Signed-off-by: Pavel Kozlov <pavel.kozlov@synopsys.com>
2022-09-21xtensa: add static pie supportMax Filippov
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
2022-09-21xtensa: drop ARCH_NEEDS_BOOTSTRAP_RELOCSMax Filippov
Xtensa does not define PERFORM_BOOTSTRAP_RELOC so it doesn't need ARCH_NEEDS_BOOTSTRAP_RELOCS definition. Remove it. Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
2022-09-21xtensa: ldso: make GOT protection adjustment conditionalMax Filippov
Xtensa PERFORM_BOOTSTRAP_GOT macro uses mprotect to make bits of GOT writable, but noMMU linux kernel returns ENOSYS to mprotect syscalls, and syscall wrapper tries to update errno with the error code. This happens well before the relocations are done and results in writes to unrelated locations, memory corruption or protection violations. Only define PERFORM_BOOTSTRAP_GOT when building xtensa configuration with MMU support. Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
2022-09-21ldso: clean up PERFORM_BOOTSTRAP_GOT ifdeferryMax Filippov
3 architectures currently define PERFORM_BOOTSTRAP_GOT: avr32, mips and xtensa. A block of code that applies relative relocations in the DL_START is disabled when PERFORM_BOOTSTRAP_GOT is defined, unless it's avr32 or mips, effectively disabling it only for xtensa. This may be simplified by removing the call to elf_machine_relative from the xtensa PERFORM_BOOTSTRAP_GOT and always using common code. Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
2022-09-07Added support for creation of Static Position-Independent Executables (PIE) ↵linted
on mips Updated config to allow compilation of rcrt1.o for mips and modified it's crt1.S to perform relocates in __start. The mips architecture performs relocations differently then most other architectures. reloc_static_pie was rewritten, taking code from dl-startup.c, in order to perfrom the additional relocations. Modifications were made to mips' dl-startup.h to allow for the use of contained macros without including _start definition. Signed-off-by: linted <linted@users.noreply.github.com>
2022-03-10dl-elf: Supress adding double '/' in library pathnameDaniel Dorau
When searching for shared libraries, it could happen that redudant '/' were added to the pathname with would later be reported via dladdr() in the dli_fname member. Signed-off-by: Daniel Dorau <d.dorau@avm.de>
2021-12-24Fix -Wundef related warningsYann Sionneau
Signed-off-by: Yann Sionneau <ysionneau@kalray.eu>
2021-06-04powerpc: fix PIE/PIC builds with newer gcc/binutils which use secureplt by ↵Yann Sionneau
default This patch fixes segfault of all user space processes (including init, which caused a panic) on recent buildroot powerpc32 builds. The issue has been reported by Romain Naour in this thread: https://mailman.uclibc-ng.org/pipermail/devel/2021-May/002068.html Recent buildroot toolchain enables secure PLT in powerpc gcc. The latter will then supply -msecure-plt to gas invocations by default. Recent buildroot also enables PIE by defaults. For the secure PLT to work in PIC, the r30 register needs to point to the GOT. Old "bss plt" was just a one-instruction-wide PLT slot, pointed-to by a R_PPC_JMP_SLOT relocation, which was written on-the-fly to contain a branch instruction to the correct address. It therefore had to stay writable. New secure PLT only contains read-only code which loads the branch address from the writable GOT. Note: secure PLT without PIC does not need r30 to be set. Because offset between plt stub code and got is known at link-time. In this case the PLT entry looks like: 1009b3e0 <__uClibc_main@plt>: 1009b3e0: 3d 60 10 0e lis r11,4110 1009b3e4: 81 6b 03 74 lwz r11,884(r11) 1009b3e8: 7d 69 03 a6 mtctr r11 1009b3ec: 4e 80 04 20 bctr Whereas secure PLT with PIC - offset between plt and got is unknown at link-time - looks like this: 000af800 <00000000.plt_pic32.__uClibc_main>: af800: 81 7e 03 80 lwz r11,896(r30) af804: 7d 69 03 a6 mtctr r11 af808: 4e 80 04 20 bctr af80c: 60 00 00 00 nop Signed-off-by: Yann Sionneau <yann@sionneau.net>
2021-02-08riscv64: sync ldso relocations with or1k, fixes 5 testsuite errorsWaldemar Brodkorb
2020-10-02kvx: add support for kvx arch to uClibc-ngYann Sionneau
This commit adds support for Kalray VLIW family (kvx) Kalray kv3 core is embedded in Kalray Coolidge SoC. This core which is the third of the KV family has the following features: 32/64 bits execution mode 6-issue VLIW architecture 64 x 64bits general purpose registers SIMD instructions little-endian In order to build a usable toolchain, build scripts are provided at the following address: https://github.com/kalray/build-scripts. Kalray uses FOSS which is available at https://github.com/kalray This includes Linux kernel, uClibc-ng, gcc, binutils, etc. Signed-off-by: Clément Léger <cleger@kalray.eu> Signed-off-by: Guillaume Thouvenin <gthouvenin@kalray.eu> Signed-off-by: Laurent Thevenoux <lthevenoux@kalray.eu> Signed-off-by: Marc Poulhies <mpoulhies@kalray.eu> Signed-off-by: Marius Gligor <mgligor@kalray.eu> Signed-off-by: Yann Sionneau <ysionneau@kalray.eu>
2020-09-22Fix unused variable warning in dl-startup.cYann Sionneau
SEND_STDERR_DEBUG does nothing if __SUPPORT_LD_DEBUG_EARLY__ is not defined thus causing a warning. Fixes this: In file included from ldso/ldso/ldso.c:86:0: ldso/ldso/dl-startup.c: In function '_dl_start': ldso/ldso/dl-startup.c:313:13: warning: variable 'strtab' set but not used [-Wunused-but-set-variable] char *strtab; ^~~~~~ Signed-off-by: Yann Sionneau <ysionneau@kalray.eu>
2020-08-25ldso: Fix pointer cast warningYann Sionneau
Fixes the following compilation warning for 64-bit arch with TLS support: CC ldso/libdl/libdl.oS ldso/libdl/libdl.c: In function 'do_dlsym': ldso/libdl/libdl.c:739:59: warning: cast from pointer to integer of different size [-Wpointer-to-int-cast] ret = _dl_tls_symaddr ((struct link_map *)sym_ref.tpnt, (Elf32_Addr)ret); ^
2020-04-01statx: make include conditional, fixes non-csky arch buildroot buildsWaldemar Brodkorb
2020-04-01or1k: fix some TLS issuesYann Sionneau
Before this commit tst-tls-at-ctor test would segfault. After it passes. testsuite run before: https://pastebin.com/504JgQXa testsuite run after: https://pastebin.com/d2aNciVt Stafford Horne already fixed it in glibc: * https://github.com/openrisc/or1k-glibc/blob/bcd87396ebe78228645c0731b06c934dfd88855a/sysdeps/or1k/dl-machine.h#L298 * https://github.com/openrisc/or1k-glibc/blob/bcd87396ebe78228645c0731b06c934dfd88855a/sysdeps/or1k/dl-machine.h#L99
2020-02-03csky: add statx conditionalsWaldemar Brodkorb
Similar to glibc commit https://sourceware.org/git/?p=glibc.git;a=commit;h=6bbfc5c09fc5b5e3d4a0cddbbd4e2e457767dae7 we need to handle Linux kernel change, which removed stat64 family from default syscall set. Signed-off-by: Waldemar Brodkorb <wbx@openadk.org> Signed-off-by: Waldemar Brodkorb <wbrodkorb@conet.de>
2019-11-08riscv64: implement NPTL/TLSWaldemar Brodkorb
basically from or1k port of uClibc-ng, with fixes for structures in pthreadtypes.h from 64 bit architectures. 18 testsuite failures counted.
2019-11-06riscv64: lazy relocations do not work like sparc/m68kWaldemar Brodkorb
2019-11-01riscv64: add shared library supportWaldemar Brodkorb
2019-04-14Fix build with SUPPORT_LD_DEBUG_EARLY enabledKonstantin Vasin
2018-12-31csky: Add EM_CSKY for ldsoGuo Ren
Support EM_CSKY 252 elf format. Changelog: Increase EM_NUM to 253 Signed-off-by: Guo Ren <ren_guo@c-sky.com> Signed-off-by: Mao Han <han_mao@c-sky.com>
2018-11-01Add support for Thumb-only processors.Christophe Lyon
* ldso/ldso/arm/aeabi_read_tp.S: Add Thumb version. * ldso/ldso/arm/dl-startup.h: Do not force ARM encoding, adjust for Thumb. * ldso/ldso/arm/resolve.S: Force Thumb encoding on Thumb-only processors. * libc/sysdeps/linux/arm/crt1.S: Do not force ARM encoding, adjust for Thumb. Signed-off-by: Mickaël Guêné <mickael.guene@st.com> Signed-off-by: Christophe Lyon <christophe.lyon@st.com>
2018-10-27ARC: Accommodate TLS fix in BinutilsEvgeniy Didin
[1] fixes clash of TLS variables on ARC and since LD now calculates relocations a bit different now we need to update dynamic loader as well otherwise relocs will be calculated improperly. Note this is an ABI change and should go in-line with corresponding ARC tools. That said either arc-2018.09 (to be released in few weeks) or the next version of upstream Binutils (2.32) are required for normal TLS work on ARC. Testcase: ----------------------------------8<------------------------------- #include <stdio.h> int foo3(void); int foo1(void); #ifdef _SHARED int foo1(){ static __thread int val3=1; val3 += 2; return val3; } #elif _SHARED2 int foo3(){ static __thread int val2=0; val2 += 2; return val2; } #else int main(){ printf("foo1 = %d \n", foo1()); printf("foo3 = %d \n", foo3()); return 0; } #endif --------------------------------->8--------------------------------------- The result shoud be: ----8<---- foo1 = 3 foo3 = 2 ---->8---- Commands to build artefacts: ----------------------------------------8<------------------------------- arc-linux-gcc -fPIE -ffunction-sections -fdata-sections -pthread -Os \ -fPIC -o testtls.o -D_SHARED -c tst.c arc-linux-gcc -fPIE -ffunction-sections -fdata-sections -pthread -Os \ -fPIC -o testtls2.o -D_SHARED2 -c tst.c arc-linux-gcc -shared -o libtesttls.so testtls.o testtls2.o -lm -Os arc-linux-gcc tst.c -o tst.out -L./ -ltesttls -Os -fPIE --------------------------------->8--------------------------------------- Add path to libtesttls.so file to LD_LIBRARY_PATH before runnig tst.out application. [1] https://sourceware.org/git/gitweb.cgi?p=binutils-gdb.git;a=commit;h=714e9a954a2e4123dcb26bb8da850e1344de4f5f Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com> Signed-off-by: Evgeniy Didin <didin@synopsys.com> CC: Cupertino Miranda <cmiranda@synopsys.com> CC: Vineet Gupta <vgupta@synopsys.com> CC: Waldemar Brodkorb <wbx@uclibc-ng.org>
2018-08-10rtld: Avoid crash on R_ARM_NONE relocationChristophe Lyon
R_ARM_NONE contains no data, so avoid dereferencing it. * ldso/ldso/arm/elfinterp.c (_dl_do_reloc): Handle R_ARM_NONE relocation (_dl_do_reloc_lazy): Likewise. Signed-off-by: Mickaël Guêné <mickael.guene@st.com> Signed-off-by: Christophe Lyon <christophe.lyon@st.com>
2018-08-10Fix htab_delete loop counterChristophe Lyon
dlclose can crash or stuck the system: When calling dlclose() then system can crash or freeze, because htab_delete() in ldso/ldso/fdpic/dl-inlines.h uses size_t for i which is a typedef to unsigned int. We exit the loop on negative value of i which can never occur since i is an unsigned int. This leads to random free of various pointers that kill the system. * ldso/include/inline-hashtab.h (htab_delete): Change type of 'i' to int. Signed-off-by: Mickaël Guêné <mickael.guene@st.com> Signed-off-by: Christophe Lyon <christophe.lyon@st.com>
2018-08-10rtld: Initialize _dl_error_catch_tsd without FUNCDESC relocationChristophe Lyon
Make _dl_initial_error_catch_tsd hidden, such that we do not need a FUNCDESC relocation when initializing _dl_error_catch_tsd. * ldso/ldso/dl-tls.c (_dl_initial_error_catch_tsd): Declare hidden. Signed-off-by: Mickaël Guêné <mickael.guene@st.com> Signed-off-by: Christophe Lyon <christophe.lyon@st.com>
2018-08-10rtld: Use ELF_RTYPE_CLASS_DLSYMChristophe Lyon
rtld must call _dl_find_hash() with ELF_RTYPE_CLASS_DLSYM since we want a function descriptor. * ldso/ldso/ldso.c (_dl_get_ready_to_run): Support __FDPIC__. Signed-off-by: Mickaël Guêné <mickael.guene@st.com> Signed-off-by: Christophe Lyon <christophe.lyon@st.com>
2018-08-10rtld: Compile with -fno-unwind-tables -fno-asynchronous-unwind-tablesChristophe Lyon
Otherwise we have link errors because of unresolved refs in libgcc.a: ld: /lib/gcc/arm-none-uclinuxfdpiceabi/9.0.0/libgcc.a(pr-support.o): in function `_Unwind_GetDataRelBase': /libgcc/config/arm/pr-support.c:378: undefined reference to `abort' ld: /lib/gcc/arm-none-uclinuxfdpiceabi/9.0.0/libgcc.a(unwind-arm.o): in function `unwind_phase2_forced': /libgcc/unwind-arm-common.inc:511: undefined reference to `memcpy' * ldso/ldso/Makefile.in (CFLAGS-rtld): Always use -fno-unwind-tables -fno-asynchronous-unwind-tables on arm Signed-off-by: Christophe Lyon <christophe.lyon@st.com>
2018-08-10rtld: Add lazy binding supportChristophe Lyon
Add support for R_ARM_FUNCDESC_VALUE and implement _dl_linux_resolver for FDPIC on ARM. * ldso/ldso/arm/elfinterp.c (_dl_linux_resolver): Support __FDPIC__. (_dl_do_lazy_reloc): Likewise. * ldso/ldso/arm/resolve.S (_dl_linux_resolve): Likewise. Signed-off-by: Mickaël Guêné <mickael.guene@st.com> Signed-off-by: Christophe Lyon <christophe.lyon@st.com>
2018-08-10TLS: fix relocation computationChristophe Lyon
* ldso/ldso/dl-elf.c (_dl_load_elf_shared_library): Fix l_tls_initimage computation. * ldso/ldso/ldso.c (_dl_get_ready_to_run): Likewise. Signed-off-by: Mickaël Guêné <mickael.guene@st.com> Signed-off-by: Christophe Lyon <christophe.lyon@st.com>
2018-08-10Fix bug in _dl_pread when using pread64 syscallChristophe Lyon
In ARM_EABI mode, the pread64 syscall parameters are aligned on 64-bits. This syscall is used in rtld when processing FDPIC relocations. * ldso/include/dl-syscall.h (__syscall_pread): Fix definition. (__dl_pread): Fix syscall invocation. * ldso/ldso/fdpic/dl-sysdep.h (__DL_PREAD): Handle __NR_pread64. Signed-off-by: Mickaël Guêné <mickael.guene@st.com> Signed-off-by: Christophe Lyon <christophe.lyon@st.com>
2018-08-10rtld: Add startup codeChristophe Lyon
Implement _start: compute parameters for __self_reloc, and give control to the user program. * ldso/ldso/arm/dl-startup.h: Implement _start for __FDPIC__. Signed-off-by: Mickaël Guêné <mickael.guene@st.com> Signed-off-by: Christophe Lyon <christophe.lyon@st.com>
2018-08-10rtld: Avoid FUNCDESC relocation on _startChristophe Lyon
* ldso/ldso/ldso.c (_start): Fix definition for __FDPIC__. Signed-off-by: Mickaël Guêné <mickael.guene@st.com> Signed-off-by: Christophe Lyon <christophe.lyon@st.com>
2018-08-10rtld: Add FDPIC code for armChristophe Lyon
Add FDPIC dynamic relocations support, similar to what other FDPIC targets do. Lazy binding is implemented in a folllow-up patch. Disable the SEND* macros because they involve relocations to access constant strings that are unsupported by the existing arm version. Define DL_START, START, ARCH_NEEDS_BOOTSTRAP_RELOCS, DL_CHECK_LIB_TYPE similarly to what other FDPIC targets do. Define raise() because _dl_find_hash references __aeabi_uidivmod, which uses __aeabi_idiv0 which in turn references raise. * include/elf.h (R_ARM_FUNCDESC): Define. (R_ARM_FUNCDESC_VALUE): Define. * ldso/include/dl-string.h (SEND_STDERR, SEND_ADDRESS_STDERR) (SEND_NUMBER_STDERR): Define empty for __FDPIC__. * ldso/ldso/arm/dl-inlines.h: New file. * ldso/ldso/arm/dl-startup.h (PERFORM_BOOTSTRAP_RELOC): Fix type of load_addr. Fix handling of R_ARM_RELATIVE, add support for R_ARM_FUNCDESC_VALUE. (DL_START, START): Define for __FDPIC__. (raise): Define. * ldso/ldso/arm/dl-sysdep.h (ARCH_NEEDS_BOOTSTRAP_RELOCS): Define. (DL_CHECK_LIB_TYPE): Define. (elf_machine_type_class): Take into account FDPIC related relocations. (elf_machine_load_address): Support __FDPIC__. (elf_machine_relative): Likewise. * ldso/ldso/arm/elfinterp.c (_dl_linux_resolver): Dummy support for __FDPIC__, implemented in a later patch. (_dl_do_reloc): Fix reloc_adr computation for __FDPIC__, fix handling of local symbols. Fix handling of R_ARM_RELATIVE, add support for R_ARM_FUNCDESC_VALUE, R_ARM_FUNCDESC. * ldso/ldso/arm/resolve.S: Make _dl_linux_resolve hidden. * ldso/ldso/fdpic/dl-inlines.h (htab_delete): Declare. * libc/sysdeps/linux/arm/bits/elf-fdpic.h: New file, similar to bfin's. * libc/sysdeps/linux/arm/crtreloc.c: Likewise. * libc/sysdeps/linux/arm/find_exidx.c (__dl_addr_in_loadaddr) Define. (find_exidx_callback): Support __FDPIC__. Signed-off-by: Mickaël Guêné <mickael.guene@st.com> Signed-off-by: Christophe Lyon <christophe.lyon@st.com>
2018-08-10rtld: Add #if defined (__FDPIC__)Christophe Lyon
Like for other FDPIC targets, add defined(__FDPIC__) where needed. * include/link.h: Include bits/elf-fdpic.h if __FDPIC__ is defined. (link_map): Use elf32_fdpic_loadaddr if __FDPIC__ is defined. (dl_phdr_info): Likewise. * ldso/include/dl-elf.h (__dl_parse_dynamic_info): Support __FDPIC__. * ldso/include/dl-hash.h (elf_resolve): Add funcdesc_ht field if __FDPIC__ is defined. * ldso/ldso/dl-hash.c (_dl_find_hash): Support __FDPIC__. * libc/misc/elf/dl-iterate-phdr.c (dl_iterate_phdr): Support __FDPIC__. Signed-off-by: Mickaël Guêné <mickael.guene@st.com> Signed-off-by: Christophe Lyon <christophe.lyon@st.com>
2018-08-10rtld: Do not protect RELRO segments when we don't use an MMU.Christophe Lyon
Without MMU, we cannot mark memory regions as read-only. * ldso/ldso/dl-elf.c (_dl_protect_relro): Do nothing if __ARCH_USE_MMU__ is defined. Signed-off-by: Christophe Lyon <christophe.lyon@st.com>
2018-06-29ldso/arc: fix LD_DEBUG segv when printing R_ARC_NONEVineet Gupta
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2018-06-06remove unused assembler functions for armFlorian La Roche
These assembler functions seem to be unused/referenced, so we can remove them completely. Signed-off-by: Florian La Roche <Florian.LaRoche@googlemail.com>
2018-04-27libdl: first execute all destructors, then munmap libraryWaldemar Brodkorb
Fix problem which might exist since 2011. We need to execute the destructors for all dependant libraries, before munmap the shared libraries, otherwise running destructor of a dependent library might cause a segfault, trying to access an already unmapped memory. This fixes for example segfaults while running php -m with ldap module. Reported-By: Dave Flogeras <dflogeras2@gmail.com> Tested-By: Dave Flogeras <dflogeras2@gmail.com>
2018-04-27libdl: calculate the length for second parameter of munmap.Dave Flogeras
Revert 35105679b9a900d58dadd0852e679c235f8176ba and add some debug code.
2018-04-22libdl: end must be bigger than startWaldemar Brodkorb
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-15 14:45:43 +0000