summaryrefslogtreecommitdiff
path: root/ldso
AgeCommit message (Collapse)Author
2007-10-21Handle STT_COMMON symbols too. Following binutils releaseJoakim Tjernlund
will set the type of common symbols to STT_COMMON instead of STT_OBJECTS, so the dynamic linker needs to handle this type os symbols too. Same changes have been added to glibc (See: bugzilla #5104). This patch ensures the uclibc will work with later bintuils. Signed-off-by: Carmelo Amoroso <carmelo.amoroso@st.com>
2007-10-13- use the compiler-driver instead of the linkerBernhard Reutner-Fischer
- adjust setting flags accordingly to use (hardcoded, see below) -Wl, Potential improvements: *) --warn-unresolved-symbols should perhaps be used for all libs *) eventually rename LDFLAGS to CC_LDFLAGS *) probe for compiler driver's notion of flag to use for passing in linker flags (i.e. don't hardcode "-Wl,")
2007-10-08Do string comparisos as late as possible during symbol lookup.Mike Frysinger
Signed-off-by: Carmelo Amoroso <carmelo.amoroso@st.com>
2007-09-28Make sure that the DSO has an hash table into its elf, otherwise skipMike Frysinger
the lookup over next DSO. Signed-off-by: Carmelo Amoroso <carmelo.amoroso@st.com>
2007-09-15Blue Swirl writes:Mike Frysinger
I got the library to compile with the attached patches, though dynamic loader crashes early. In buildroot I changed the architecture name by hand from sparc to sparc64, otherwise the compiler produced 32-bit files with V9 (64-bit) instructions. This configuration is not supported by QEMU, so I aimed for pure 64-bit. I think Sparc64 option needs to be added to buildroot. The _Qp_ ops seem to be required by the ABI. This and setjmp patches are just hacks to get the compilation further. The _Qp_ ops can be found in glibc, would it be OK to use those? V9 assembler requires declarations for global register use. The mem* functions in sparc32 directory did not work. They are actually used only by the hybrid 32-bit + V9 CPU configuration.
2007-07-29Remove stray code alignment (.align 16 and .align 4 directives)Denis Vlasenko
from i386 and x86_64.
2007-07-18Apply patch as submitted by Blue Smurfy Swirly <blauwirbel@gmail.com> for ↵"Steven J. Hill"
Sparc32.
2007-06-04Correct return value. Pointed out by psm.Joakim Tjernlund
2007-04-17fix ld.so.cache handling on no-mmu setupsMike Frysinger
2007-03-31Bernd Schmidt writes:Joakim Tjernlund
Currently a static libdl.a doesn't run all the constructors or destructors of the libraries it loads. I can't see a good reason for that, and it does cause aborts in the destructors it does run for things like libgcc.so on the Blackfin. Fixed with the patch below - untested in mainline, but the equivalent has been in our Blackfin tree for a while now.
2007-03-19#1273 if EXTRAVERSION is set, make sure we respect itMike Frysinger
2007-03-13Carmelo Amoroso writes:Joakim Tjernlund
I experiencied some problems while trying to debug the ld.so (sh4) in debug mode. I found that the _start code was not placed into any PT_LOAD segment causing a SIGSEV. I solved this issue explicitely placing the _start code into the .text section (see attached patch).
2007-03-13Carmelo Amoroso writes:Joakim Tjernlund
Hi All, the attached patch completes my previous patch on statically linked application calling dlopen enabling the support for LD_DEBUG. Further it fixes the missing initialization of the _dl_library_path variable. This patch has been fully tested with the uClibc-nptl branch (sh4).
2007-02-21make sure we have rtld_hidden_def(_dl_debug_state)Mike Frysinger
2007-02-17Make _dl_malloc alignment arch configurable.Joakim Tjernlund
From Atsushi Nemoto.
2007-02-16Fix dlopen for static apps.Joakim Tjernlund
From Carmelo Amoroso.
2007-02-13use /*...*/ comments rather than #... so we can preprocessMike Frysinger
2007-01-29- see if defined foo before trying to look at the value of foo (that should ↵Bernhard Reutner-Fischer
be 0 in this case. Avoids some warnings).
2007-01-28fix from Bernd Schmidt to make sure _dl_debug_state isnt optimized away and ↵Mike Frysinger
does not generate relocs
2007-01-28as pointed out by Jocke, use "2" for actual error messages and ↵Mike Frysinger
_dl_debug_file for debug messages
2007-01-26Fix libdl bug reported by Cedric Hombourger inJoakim Tjernlund
http://uclibc.org/lists/uclibc/2007-January/017165.html
2007-01-09Joseph S. Myers writes:Joakim Tjernlund
ELF symbol names are arbitrary 0-terminated sequences of bytes, and the ELF hash function is defined in the ELF specification to use unsigned char. Thus uClibc's _dl_elf_hash, using plain char, breaks when char is signed and symbol names contain bytes with the high bit set, as with GCC's ucnid-* tests. This patch fixes this problem.
2007-01-05Support SecurePLTs for PowerPC. You need a toolchain that supportsJoakim Tjernlund
config option --enable-secureplt. The assembler must also supports R_PPC_REL16* relocations. gcc 4.1.1 and binutils 2.17 is known to do this.
2006-12-06bits/kernel_stat.h is for internal uClibc use only, fix a few otherEric Andersen
minor include file issues
2006-11-21Use constant pool instead of and adr Khem Raj
instruction in unoptimized builds and thumb: thanks Paul Brook
2006-11-17Bernd Schmidt writes: [blackfin updates] add support for FDPIC and include ↵Mike Frysinger
L1 functions
2006-11-17Bernd Schmidt writes:Mike Frysinger
This reintroduces a mechanism identical to the DL_BOOT macro present in older versions of uClibc. On Blackfin and FRV, we want to pass more than one argument to _dl_start. We also want to do something special before returning, so delete the warning when the START macro is defined.
2006-11-16revert rev 16527 changes to ldso/ldso/dl-hash.cEric Andersen
2006-11-16Paul Brook writes:Eric Andersen
The patch below fixes a bug in the new ARM _ld_linux_resolve implementation. I'm don't know if/how the current implementation was tested, but it's completely broken. This patch makes the prologue and epilogue agree on how big the stack frame is, and also makes sure EABI doubleword stack alignment is preserved. Tested on arm-linux-gnueabi.
2006-11-10This change reimplements the ARM _dl_linux_resolve entry point - this isEric Andersen
called to resolve DLL PLT entries. The assembler is changed to be thumb compatible and slightly faster, the C function, _dl_linux_resolver (note the extra r) is changed to take a byte address in place of an 8 byte count (faster in caller and callee, and slightly easier to understand).
2006-11-10arm thumb:Eric Andersen
Put the call_via_rx code into each executable - call_via_ip cannot possibly work if called through the PLT! ldso requires this code too as it is not linked with the crt stuff and thumb ldso does make calls via a register. The patch puts the code into crti.S so that it is linked into every normally built application (if thumb or interworking is selected). This is only 30 extra bytes and it works - the previous code did not because nothing both implemented and exported the APIs (they were in libgcc, but not in the version script). crti.S and crtn.S is also brought up to date with GCC 3.4.4 - this is essential for thumb support because the .init and .fini sections must use arm or thumb code to match the compilation of the libraries. Note that code which pushes stuff into .init or .fini must be compiled with or without -mthumb to match the uclibc compilation - and gcc itself (which does do this) must therefore be compiled to match.
2006-11-04mips64 patch from Atsushi Nemoto:Eric Andersen
64bit MIPS ELF format tweaks. (from glibc) Elf32/ElfW convertions. asm code adjustments.
2006-10-10Make _dl_linux_resolve interworking safe. Thanks Paul BrookKhem Raj
2006-10-07fixup from Bernd Schmidt to properly document DL_ADDR_TO_FUNC_PTRMike Frysinger
2006-10-07Bernd Schmidt writes:Mike Frysinger
This introduces a new SEND_EARLY_STDERR macro that is to be used in dl-startup.c before ld.so is relocated. It is needed on Blackfin (and frv) FDPIC since we have to use special tricks to get the address of a string constant. EARLY_STDERR_SPECIAL gets defined on such a machine and prevents printing of debug strings inside the loop that relocates ld.so, since we can't decide which of the two variants to use.
2006-10-07Don't use r10 to find PIC base. In GCC 4.1.1 onwards ARM PIC handling uses ↵Khem Raj
pseudo register for PIC base so load and relocate it.
2006-09-19merge some more FDPIC related fixes from Bernd SchmidtMike Frysinger
2006-07-05patch from Bernd Schmidt to abstract away initializing of relocation addressesMike Frysinger
2006-07-05patch from Bernd Schmidt to abstract away initializing of prog load addressesMike Frysinger
2006-07-05convert #if 0 code to _dl_if_debug_print()Mike Frysinger
2006-07-05patch from Bernd Schmidt to abstract away load address typesMike Frysinger
2006-07-05patch from Bernd Schmidt to abstract away load address checksMike Frysinger
2006-07-05fixup my copyright notice, trim stale remnants of older notices whichEric Andersen
I had clearly run search/replace on that were cluttering things up.
2006-07-05update licenseMike Frysinger
2006-07-05missed an ElfW(Addr) changeMike Frysinger
2006-07-05patch from Bernd Schmidt to abstract away load addressesMike Frysinger
2006-07-05use ElfW(Addr) in more placesMike Frysinger
2006-07-05revert fdpic patch so we can merge it in bit by bitMike Frysinger
2006-06-30Bernd Schmidt writes: abstract away addresses so we can support FDPIC ELFsMike Frysinger
2006-06-30Bernd Schmidt writes: too many semicolons!Mike Frysinger