| Age | Commit message (Collapse) | Author |
|---|
|
I still don't have a good handle on why and when the different
scope values should be used.
|
|
> Not there yet, but the interfaces are much closer now...
> Heading to bed though, since its 5:30am. :-)
This works, but I discovered something "funny". For all
relocs but COPY you can use scope instead of scope->dyn->symbol_scope
and it is much faster to do that. Search for "Funny" in the patch
to see what I mean. Probably I probably broke something, please let me
know if it works for you too.
I think I am done with ldso now. Has been fun and I hope to
actually use uClibc/busybox soon in a project.
Ohh, there is one thing left, double sized PLT entries, but maybe these
aren't needed in uClibc?
Sweet dreams
Jocke
|
|
_dl_parse_lazy_relocation_information() and _dl_parse_copy_information()
so they are all consistant, allowing for future consolidation.
Trim some trailing whitespace as well.
|
|
Here is the cleaned up laze reloc patch.
Summary:
- Minor cleanup.
- disable the "if (finaladdr <= 0x01fffffc || finaladdr >= 0xfe000000)"
test since it almost never triggered.
- Optimized the lazy relocs handling.
Would be great if you could commit ASAP.
Jocke
|
|
|
|
Hi again
I have done some serious clenup of powerpc/elfinterp.c
- Make it look more like glibc.
- Performance modifictions.
- Fixed a few bugs in _dl_do_reloc(). These seem not to have affected
anything, but this how glibc do it.
Jocke
|
|
> Is there anything I can do/provide that would assist in the solving of
> this problem on PowerPC? I'm still concerned about my lack of flash space...
Try this path. It fixes the recent ldso problems for me on my mpc860 board.
You should be able to use ldso without the dcbx patch to the kernel now.
Please report back.
Jocke
|
|
This is just a wild guess, but you could try this to see if it fixes
Richards problem:
|
|
I think I messed up a little in my latest patch to Erik. Can you try
this on top of CVS(which I think you have already)
Jocke
And later writes:
Hi Erik
I just saw something that might be a problem.
The "delta" variable is signed and
the "delta" calculations, such as delta = PLT_LONGBRANCH_ENTRY_WORDS*4 - (insn_addr-plt_addr+4),
are supposed to be unsigned.
Jocke
|
|
Comparing glibc with uClibc makes me think that the delta calculations are
wrong here. Comparing some more I still think there are a
data_words[index] assignments missing. Here is a path that has both the
data_words[index] and the above delta calclations.
This also fixes a terribly obvious bug, also spotted by Joakim, which Erik
introduced when he copied things from the i386 ldso code.
With this patch applied, things now seem to be working perfectly!
|
|
Hi again
Back at work. Here is a patch that fixes the 2 errors I found yesterday.
I have excluded the "data_words[index]" part for now.
|
|
> Very interesting. Do you have any suggestions for how
> we could fix our powerpc shared library loader
Removing those instr. comes with a very big performance
penalty. To flush the dcache you will have read up to 8KB
dummy data and to invalidate the icache you will have to
execute up to 16KB nops. I don't know of any other way from
user space.
hmm, actually I think it will work reliable to perform a
store to the same page(s) as the dcbst/icbi will act on. That
way you will make the DTLB Error happen(if any) prior to the
dcbst/icbi. The worst thing that can happen then is a regular
DTLB Miss and that works for dcbst/icbi.
You will have to lookout for if dcbst/icbi crosses a page
boundary. Then you will have to perform a store to both
pages.
Jocke
# And again later writes:
Hi again
I think I know what the problem is. The
PPC_DCBST;PPC_SYNC;PPC_ICBI;PPC_ISYNC sequence is executed
even if no modification has been done i some cases:
_dl_linux_resolver(), the last else has no store for insns[0].
these is a insns[1] = OPCODE_B(delta - 4) that
does not have a PPC_DCBST.
_dl_do_lazy_reloc(), for R_PPC_NONE there is no store.
for R_PPC_JMP_SLOT there is a
insns[1] = OPCODE_B(delta)that does not
have a PPC_DCBST.
_dl_do_reloc(), for R_PPC_COPY there is no store.
for R_PPC_JMP_SLOT there is a
reloc_addr[1] = OPCODE_B(delta) that does not
have a PPC_DCBST.
_dl_init_got(), I THINK that the
PPC_DCBST(plt);
PPC_DCBST(plt+4);
PPC_DCBST(plt+8);
PPC_SYNC;
PPC_ICBI(plt);
PPC_ICBI(plt+4);
PPC_ICBI(plt+8);
PPC_ISYNC;
is off a bit. The address range does not match the sum
of the plt[] and tramp[] address range.
Jocke
# And then later added the comment:
I think that the tramp[] part should be included in the
PPC_DCBST/PPC_ICBI sequence. Then you have to add entries for
plt+12 and plt+16. If the tramp[] part should be excluded,
then all is well.
Jocke
|
|
|
|
|
|
|
|
some other minor warnings.
|
|
Ok, now i got it after a day of work.
I have had a look into glibc and found the following:
sysdeps/powerpc/dl-machine.c:
...
case R_PPC_JMP_SLOT:
/* It used to be that elf_machine_fixup_plt was used here,
but that doesn't work when ld.so relocates itself
for the second time. On the bright side, there's
no need to worry about thread-safety here. */
{
Elf32_Sword delta = finaladdr - (Elf32_Word) reloc_addr;
...
The comment made me suspicious. The same position in uClibc looks like this:
ldso/ldso/powerpc/elfinterp.c:
...
case R_PPC_JMP_SLOT:
{
unsigned long targ_addr = (unsigned long)_dl_linux_resolve;
int delta = targ_addr - (unsigned long)reloc_addr;
...
When I change it to the following it works:
...
case R_PPC_JMP_SLOT:
{
unsigned long targ_addr = *reloc_addr;
int delta = targ_addr - (unsigned long)reloc_addr;
...
I hope it will not break anything. Can anyone review this change and
commit it into CVS?
thanks,
ron
|
|
|
|
Move all configuration options into the new config system.
-Erik
|
|
shared library support. This also adds some cleaner error
handling, which I (Erik) then ported over to x86 and arm.
In addition Stefan added the following fixes:
- in hash.c was the lvalue handling of global library functions wrong.
To fix this I had to change the prototype of _dl_find_hash. (==> TIS and
ELF spec. Vers. 1.2)
- in ldso.c was the order of the .init sections calls wrong. Before we call
the initialization code of a library we have to check that all dependend
libraries are already initialized. This can easily made by calling it in the
revers loading order. For this I added a previous pointer chain.
- in ldso.c the ELF magics wasn't checked fo PPC, MIPS and SH architecture
|
|
-Erik
|
|
I am very pleased to announce that the MIPS dynamic linker/loader
for uClibc is now working. It works on big and little endian
platforms.
A few minor changes were needed to avoid breaking ldd, and since this
makes some non-trivial changes, I have tested on x86, arm, and powerpc
to be sure thoese arches didn't get broken. Excellent work Steven!
|
|
is encountered...
-Erik
|
|
|
|
-Erik
|
|
things up when we don't care about symbol resolution problems. Make
the lib loader always look first in the directory where the shared lib
loader was found.
-Erik
|
|
|
|
-Erik
|
|
nameing conflicts with std header files.
-Erik
|
|
internal to a library were not relocated correctly, specifically
sys_errlist[].
|
|
of a lib function.
|
|
should work now. R_PPC_JMP_SLOT correctly being lazily relocated.
hash.h: Added a field in elf_resolve to store a ppc-specific address.
boot1.c: Added debugging code. Disabled check that fails on powerpc
because the string literal requires a reloc that isn't performed.
Added check to ignore d_tag if it is out of bounds, as has been
observed with powerpc binaries.
|
|
of _dl_fprintf which should really be _dl_dprintf
-Erik
|
|
-Erik
|
|
Fixed icache clearing during _dl_init_got().
Added a few more reloc types.
Added out-of-range check for R_PPC_REL24.
|
|
of debugging information is still there.
|
