| Age | Commit message (Collapse) | Author |
|---|
|
[1] fixes clash of TLS variables on ARC and since LD now calculates relocations
a bit different now we need to update dynamic loader as well otherwise relocs
will be calculated improperly.
Note this is an ABI change and should go in-line with corresponding ARC tools.
That said either arc-2018.09 (to be released in few weeks) or the next version of upstream
Binutils (2.32) are required for normal TLS work on ARC.
Testcase:
----------------------------------8<-------------------------------
#include <stdio.h>
int foo3(void);
int foo1(void);
#ifdef _SHARED
int foo1(){
static __thread int val3=1;
val3 += 2;
return val3;
}
#elif _SHARED2
int foo3(){
static __thread int val2=0;
val2 += 2;
return val2;
}
#else
int main(){
printf("foo1 = %d \n", foo1());
printf("foo3 = %d \n", foo3());
return 0;
}
#endif
--------------------------------->8---------------------------------------
The result shoud be:
----8<----
foo1 = 3
foo3 = 2
---->8----
Commands to build artefacts:
----------------------------------------8<-------------------------------
arc-linux-gcc -fPIE -ffunction-sections -fdata-sections -pthread -Os \
-fPIC -o testtls.o -D_SHARED -c tst.c
arc-linux-gcc -fPIE -ffunction-sections -fdata-sections -pthread -Os \
-fPIC -o testtls2.o -D_SHARED2 -c tst.c
arc-linux-gcc -shared -o libtesttls.so testtls.o testtls2.o -lm -Os
arc-linux-gcc tst.c -o tst.out -L./ -ltesttls -Os -fPIE
--------------------------------->8---------------------------------------
Add path to libtesttls.so file to LD_LIBRARY_PATH before runnig
tst.out application.
[1] https://sourceware.org/git/gitweb.cgi?p=binutils-gdb.git;a=commit;h=714e9a954a2e4123dcb26bb8da850e1344de4f5f
Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
Signed-off-by: Evgeniy Didin <didin@synopsys.com>
CC: Cupertino Miranda <cmiranda@synopsys.com>
CC: Vineet Gupta <vgupta@synopsys.com>
CC: Waldemar Brodkorb <wbx@uclibc-ng.org>
|
|
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
|
|
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
|
|
This removes _DYNAMIC@gotpc from elf_machine_load_address()
This is a seperate commit to callout the fact that old code was actually
broken but was NOT caught since it never gets called (and will never be)
since ld.so only calls it if kernel doesn't pass AT_BASE auxvt, which is
not true for Linux.
if (!auxvt[AT_BASE].a_un.a_val)
auxvt[AT_BASE].a_un.a_val = elf_machine_load_address();
So while the intent was to remove _DYNAMIC@gotpc construct, we need to
come up with something which works.
The build time address computation of .dynamic which works well is:
- "ld %1, [pcl, _DYNAMIC@gotpc] \n"
+ "ld %1, [pcl, _GLOBAL_OFFSET_TABLE_@pcl] \n"
However the runtime address of .dynamic can only be generated with
"add %0, pcl, _DYNAMIC@pcl \n"
which unfortunately is what is currently broken as it is converted to
i_GLOBAL_OFFSET_TABLE_t and thus refers to runtime address of .got and
not .dyanmic
Thus we resort to using an arbit symbol _dl_start at the expense of an
extra GOT entry and a bogus R_ARC_NONE relo in ldso itself which now
needs to be ignored.
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
|
|
This converts elf_machine_dynamic() to not use the _DYNAMIC@xx construct
which was historically converted by assembler into _GLOBAL_OFFSET_TABLE
Now that "hack" is being removed from assembler, we need to make sure
that no code relies on that magic "conversion".
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
|
|
Signed-off-by: Waldemar Brodkorb <wbx@openadk.org>
|
|
This commit reverses a change introduced in commit 20554a78a9bba that
split some of the ARC code into two based on whether uClibc was
configured with native threads or not.
The native thread code was updated to use the relocation syntax of
modern binutils, while the non-native code path used a syntax only
accepted in older versions of binutils.
The problem with this is that the choice of old binutils or not is
orthogonal to the choice of native threads or not, and so, inevitably a
user with a recent version of binutils can make the choice to configure
uClibc with non-native thread support, and run into code that will not
assemble.
The solution is either to abandon support for the old tools completely,
or to add a new compile time flag for ARC that is set when the version
of binutils being used is old; this new flag would allow the old
relocation structure to be selected.
In this commit I have simply dropped support for older versions of the
tools.
|
|
This commit adds support for R_ARC_JMP_SLOT relocations during the
bootstrap phase of the dynamic linker. These relocations will be
generated if uClibc-ng is configured with 'DODEBUG=y'.
|
|
With new binutils supporting DT_RELACOUNT, ldso was crashing as it was
parsing relocs incorrectly.
Apparently that code ran for first time and was never tested.
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
|
|
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
|
|
The R_ARC_NONE relocation is generated when --gc-sections, used by the
compile time linker, removes some sections. This is completely normal,
and we can see that all other targets (based on random sampling) have
support for R_*_NONE relocations (named for each target).
Handling R_ARC_NONE involves doing nothing with it, which is nice and
easy.
Signed-off-by: Andrew Burgess <andrew.burgess@embecosm.com>
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
|
|
This is next gen Instruction Set Architecture from Synopsys and basis
for the ARC HS family of processors.
http://www.synopsys.com/dw/ipdir.php?ds=arc-hs38-processor&elq_mid=5732&elq_cid=458802
http://www.synopsys.com/IP/ProcessorIP/ARCProcessors/arc-hs/Pages/default.aspx
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
|
|
uClibc mainline supports NPTL which in turns depends on TLS support in
the tools (gcc/binutils), which is yet to be merged in dev branches.
However there is some non NPTL code in uClibc, added as part of NPTL
effort, which relies on certain relocations only provided by NPTL
binutils. As a result building the current upstream even for LT.old
breaks.
So conditionalize that code on tools, bu tin lack of specific versions,
we use NPTL enabling as a sign the tools are equipped to handle those
relos.
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
|
|
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
|
|
Signed-off-by: Joern Rennecke <joern.rennecke@embecosm.com>
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
|
|
Use spaces instead of tabs in the table to accomodate different tab
settings.
Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
|
|
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
|
|
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
|
