Age | Commit message (Collapse) | Author |
|
This commit adds support for Kalray VLIW family (kvx)
Kalray kv3 core is embedded in Kalray Coolidge SoC. This core which is the
third of the KV family has the following features:
32/64 bits execution mode
6-issue VLIW architecture
64 x 64bits general purpose registers
SIMD instructions
little-endian
In order to build a usable toolchain, build scripts are provided at the
following address: https://github.com/kalray/build-scripts.
Kalray uses FOSS which is available at https://github.com/kalray
This includes Linux kernel, uClibc-ng, gcc, binutils, etc.
Signed-off-by: Clément Léger <cleger@kalray.eu>
Signed-off-by: Guillaume Thouvenin <gthouvenin@kalray.eu>
Signed-off-by: Laurent Thevenoux <lthevenoux@kalray.eu>
Signed-off-by: Marc Poulhies <mpoulhies@kalray.eu>
Signed-off-by: Marius Gligor <mgligor@kalray.eu>
Signed-off-by: Yann Sionneau <ysionneau@kalray.eu>
|
|
|
|
Support EM_CSKY 252 elf format.
Changelog:
Increase EM_NUM to 253
Signed-off-by: Guo Ren <ren_guo@c-sky.com>
Signed-off-by: Mao Han <han_mao@c-sky.com>
|
|
Add FDPIC dynamic relocations support, similar to what other FDPIC
targets do.
Lazy binding is implemented in a folllow-up patch.
Disable the SEND* macros because they involve relocations to
access constant strings that are unsupported by the existing
arm version.
Define DL_START, START, ARCH_NEEDS_BOOTSTRAP_RELOCS,
DL_CHECK_LIB_TYPE similarly to what other FDPIC targets do.
Define raise() because _dl_find_hash references __aeabi_uidivmod,
which uses __aeabi_idiv0 which in turn references raise.
* include/elf.h (R_ARM_FUNCDESC): Define.
(R_ARM_FUNCDESC_VALUE): Define.
* ldso/include/dl-string.h (SEND_STDERR, SEND_ADDRESS_STDERR)
(SEND_NUMBER_STDERR): Define empty for __FDPIC__.
* ldso/ldso/arm/dl-inlines.h: New file.
* ldso/ldso/arm/dl-startup.h (PERFORM_BOOTSTRAP_RELOC): Fix type
of load_addr. Fix handling of R_ARM_RELATIVE, add support for
R_ARM_FUNCDESC_VALUE.
(DL_START, START): Define for __FDPIC__.
(raise): Define.
* ldso/ldso/arm/dl-sysdep.h (ARCH_NEEDS_BOOTSTRAP_RELOCS): Define.
(DL_CHECK_LIB_TYPE): Define.
(elf_machine_type_class): Take into account FDPIC related
relocations.
(elf_machine_load_address): Support __FDPIC__.
(elf_machine_relative): Likewise.
* ldso/ldso/arm/elfinterp.c (_dl_linux_resolver): Dummy support
for __FDPIC__, implemented in a later patch.
(_dl_do_reloc): Fix reloc_adr computation for __FDPIC__, fix
handling of local symbols. Fix handling of R_ARM_RELATIVE, add
support for R_ARM_FUNCDESC_VALUE, R_ARM_FUNCDESC.
* ldso/ldso/arm/resolve.S: Make _dl_linux_resolve hidden.
* ldso/ldso/fdpic/dl-inlines.h (htab_delete): Declare.
* libc/sysdeps/linux/arm/bits/elf-fdpic.h: New file, similar to bfin's.
* libc/sysdeps/linux/arm/crtreloc.c: Likewise.
* libc/sysdeps/linux/arm/find_exidx.c (__dl_addr_in_loadaddr) Define.
(find_exidx_callback): Support __FDPIC__.
Signed-off-by: Mickaël Guêné <mickael.guene@st.com>
Signed-off-by: Christophe Lyon <christophe.lyon@st.com>
|
|
|
|
Add NT_GNU_BUILD_ID and other defines to allow applications
using it to successfully compile. (f.e. firefox)
|
|
Port over NPTL/TLS support from GNU C Library.
In the first step only the slower syscall is used for TLS
access. The uClibc-ng testsuite shows 79 errors, so their
is room for bugfixes and improvements.
|
|
Follow the steps to build c-sky uclibc linux system:
1. git clone https://github.com/c-sky/buildroot.git
2. cd buildroot
3. make qemu_csky_ck810_uclibc_defconfig
4. make
Follow the buildroot/board/qemu/csky/readme.txt to run.
This buildroot toolchain is pre-build, But you can rebuild
the c-sky uclibc-ng alone and install it to the buildroot
sysroot manually.
We'll try our best to improve the uclibc-ng continuously.
Signed-off-by: Guo Ren <ren_guo@c-sky.com>
|
|
Signed-off-by: Waldemar Brodkorb <wbx@openadk.org>
|
|
Ported over from GNU C Library and runtime tested in Qemu.
|
|
This commit includes following features.
1. Support NPTL/TLS
2. Add libm function which is used to handle FP rounding and excpetions
(ex: fclrexcpt,fedisblxcpti,feenablxcpt... )
3. Add *context function for operating user context
(ex: setcontext,getcontext,makecontext... )
4. Change the return flow from signal handler
5. Cleanup of old code
The testsuite only has 2 errors, tst-cpuclock1 and tst-cputimer1,
which are related to timing accuracy. (math and locale tests are disabled)
Signed-off-by: Vincent Ren-Wei Chen <vincentc@andestech.com>
|
|
Only static linking is supported for now.
More debugging and analyzing for ld.so, TLS and NPTL
is required. But at least you can bootup a static
root fileystem in Qemu.
|
|
Not perfect, but a starting point.
Some tests of the test suite are failing.
|
|
Add support for Andes Technology NDS32 architecture.
See here http://www.andestech.com/en/index/index.htm for more
informaton. Verification of the port from an older uClibc
port was done on a sponsored AG101p board.
The testsuite only has 5 errors, three are related to
an existing bug in dlclose() with LT.old, also happening
on cris32 and m68k.
Failures to fallocate/posix_fallocate are unresolved.
Thanks to Andes Technology sponsoring the hardware and
being very helpful while doing the uClibc-ng porting.
Signed-off-by: Waldemar Brodkorb <wbx@uclibc-ng.org>
|
|
|
|
Both architectures are more or less deprecated.
No Linux upstream support, no gcc support for uClinux.
|
|
Information about Openrisc:
http://opencores.org/or1k/Main_Page
Integrated from:
https://github.com/openrisc/uClibc-or1k
|
|
Closes ticket #4.
http://www.uclibc-ng.org/trac/ticket/4
|
|
|
|
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
|
|
and remove a few ancient entries
Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
|
|
perf in upstream Linux kernel 3.17 onwards expects STT_GNU_IFUNC
replicate it from glibc
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
|
|
This is next gen Instruction Set Architecture from Synopsys and basis
for the ARC HS family of processors.
http://www.synopsys.com/dw/ipdir.php?ds=arc-hs38-processor&elq_mid=5732&elq_cid=458802
http://www.synopsys.com/IP/ProcessorIP/ARCProcessors/arc-hs/Pages/default.aspx
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
|
|
Changes from:
https://github.com/foss-xtensa/uClibc/commits/xtensa_nptl
Author: Chris Zankel <chris@zankel.net>
Author: Baruch Siach <baruch@tkos.co.il>
|
|
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
|
|
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
|
|
Signed-off-by: Markos Chandras <markos.chandras@imgtec.com>
Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
|
|
Signed-off-by: Markos Chandras <markos.chandras@imgtec.com>
Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
|
|
This matches a similar change made to glibc.
No functional changes here.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
|
|
ELFOSABI_GNU replaces ELFOSABI_LINUX, the latter is kept as a compatibility
alias, and ELFOSABI_HURD is removed. See the table on
<http://www.sco.com/developers/gabi/latest/ch4.eheader.html#osabi> for
reference.
Signed-off-by: Thomas Schwinge <thomas@codesourcery.com>
Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
|
|
microblaze can either be with mmu or without
If with, use elf rather than flat, and support shared libs
Signed-off-by: Ryan Flux <ryan.flux@emsolutions.com.au>
Signed-off-by: Steve Bennett <steveb@workware.net.au>
Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
|
|
This adds support for the TI C6X family of processors.
Signed-off-by: Mark Salter <msalter@redhat.com>
Signed-off-by: Aurelien Jacquiot <a-jacquiot@ti.com>
Signed-off-by: Bernd Schmidt <bernds@codesourcery.com>
|
|
Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
|
|
elf.h needs __BYTE_ORDER, and s_scalbn.c needs {LONG,INT}_MAX.
shm.c complains about no prototypes for shm_{open,unlink} without its header.
Signed-off-by: Ron Lee <ron@debian.org>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
|
|
This is to match changes in the toolchain.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
|
|
(Darwin, Windows, etc...)
|
|
|
|
text data bss dec hex filename
- 16709 240 92 17041 4291 lib/ld-uClibc.so
+ 16634 236 92 16962 4242 lib/ld-uClibc.so
- 4602 344 4 4950 1356 lib/libdl-0.9.30-svn.so
+ 4571 328 4 4903 1327 lib/libdl-0.9.30-svn.so
- 4602 344 4 4950 1356 lib/libdl.so
+ 4571 328 4 4903 1327 lib/libdl.so
|
|
|
|
|
|
|
|
The following patches add support for the Xtensa processor architecture
to uClibc. They are based on a recent SVN checkout (12/05/2007).
The first patch (attached to this post) adds Xtensa support to various
shared configuration and make files. The following patches then include
the Xtensa specific files and directories.
I welcome any feedback and would appreciate it if you could include the
patches into the mainline tree. I am certainly committed to maintain the port.
Bob Wilson was kind enough to review the patches.
Some notes about the architecture: Xtensa is a configurable and
extensible processor architecture developed by Tensilica. For more
information, please visit: www.linux-xtensa.org.
|
|
|
|
<hcegtvedt@atmel.com>
|
|
|
|
L1 functions
|
|
|
|
|
|
|
|
|