summaryrefslogtreecommitdiff
path: root/extra/Configs
AgeCommit message (Collapse)Author
2013-08-02malloc: enable assert() when malloc debuggingBaruch Siach
UCLIBC_MALLOC_DEBUGGING is useless without assert(). Signed-off-by: Baruch Siach <baruch@tkos.co.il> Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
2013-06-14config: UCLIBC_HAS_OBSTACK to optionally enable obstack supportAnthony G. Basile
Signed-off-by: Anthony G. Basile <blueness@gentoo.org> Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
2013-05-19i386: punt all config options that just control -marchMike Frysinger
You can set these yourself in your CFLAGS, and our list is incomplete and pointless (we agreed some time ago to stop doing this). We keep around CONFIG_[3456]86 because it is used to select between different optimized subdirs of handcoded assembly. Also take this opportunity to up the default to i686. If you're using an older cpu, then you can handle changing this yourself. Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2013-04-04add UCLIBC_SUSV2_LEGACY to hide vallocBernhard Reutner-Fischer
valloc was marked as LEGACY in SUSv2, removed from SUSv3 and later. TODO: Remove this (point people to memalign and it's successors?). Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
2013-03-14Add support for the Meta architectureMarkos Chandras
Meta cores are 32-bit, hardware multithreaded, general purpose, embedded processors which also feature a DSP instruction set, and can be found in many digital radios. They are capable of running different operating systems on different hardware threads, for example a digital radio might run RTOSes for DAB decoding and audio decoding on 3 hardware threads, and run Linux on the 4th hardware thread to manage the user interface, networking etc. HTPs are also capable of running SMP Linux on multiple hardware threads. Signed-off-by: Markos Chandras <markos.chandras@imgtec.com> Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
2013-03-14libpthread: linuxthreads.old: Allow building for no-legacy-syscalls ABIVineet Gupta
Since NPTL port to an ARCH can be non-trivial, we must allow the legacy pthread lib to be built for the common-generic syscall ABI Note that only linuxthreads.old is allowed, since "newer" linuxthreads relies on sysctl which the ABI no longer provides. Signed-off-by: Vineet Gupta <vgupta@synopsys.com> Cc: Markos Chandras <markos.chandras@imgtec.com> Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
2013-02-20Config.in: Introduce symbol for arches with deprecated syscallsMarkos Chandras
Linuxthreads(old and new) need deprecated syscalls to build. Existing architectures support these system calls but new architectures don't. This symbol has no functional change apart from hidding the Linuxthreads symbols from arches that don't support them. Signed-off-by: Markos Chandras <markos.chandras@imgtec.com> Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
2013-01-26buildsys: allow the toolchain to search its dirs for kernel headersMike Frysinger
Setting KERNEL_HEADERS up to the exact path all the time is a pita, especially when the toolchain is often times already configured to do the right thing. So if the user has set that to "", don't force any specific paths. Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2013-01-16config: improve help of UCLIBC_HAS_RESOLVER_SUPPORTBernhard Reutner-Fischer
Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
2013-01-10buildsys: remove superfluous default nBernhard Reutner-Fischer
kconfig's default defaults to n so spelling out default n is redundant Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
2013-01-10libc: add {get,set,swap,make}context user context manipulation functionsFlorian Fainelli
Add the obsolescent SUSv3 family of user context manipulating functions for arm, i386, mips, x86_64. Signed-off-by: Timon ter Braak <timonterbraak@gmail.com> Signed-off-by: Florian Fainelli <florian@openwrt.org> Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com> Signed-off-by: Natanael Copa <ncopa@alpinelinux.org> Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
2012-06-15update arc4random from bug #885Peter S. Mazinger
Add config option to provide arc4random without device access. Signed-off-by: Peter S. Mazinger <ps.m@gmx.net> Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
2012-06-15ssp: rework, sync messages with the ones in glibcPeter S. Mazinger
Touch signals only if DODEBUG is enabled. Make the signal selection dependent on DODEBUG, as last resort use SIGKILL. Use internal functions with less arguments, some savings. Fix a warning about unused argument. Do not use openlog/closelog, while there remove their hidden versions. Signed-off-by: Peter S. Mazinger <ps.m@gmx.net> Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
2012-06-15make UCLIBC_HAS_PROGRAM_INVOCATION_NAME and UCLIBC_HAS___PROGNAME ↵Peter S. Mazinger
independent options Signed-off-by: Peter S. Mazinger <ps.m@gmx.net> Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
2012-06-15add LDSO_SAFE_RUNPATH config optionPeter S. Mazinger
Signed-off-by: Peter S. Mazinger <ps.m@gmx.net> Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
2012-06-15Config.in.arch: remove UCLIBC_FORMAT_ELF config optionPeter S. Mazinger
Unused option (and is in !ARCH_HAS_MMU guarded section, but depends on ARCH_HAS_MMU) Signed-off-by: Peter S. Mazinger <ps.m@gmx.net> Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
2012-06-15Config.in: NPTL does not compile with disabled UCLIBC_HAS_REALTIMEPeter S. Mazinger
Select it. Signed-off-by: Peter S. Mazinger <ps.m@gmx.net> Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
2012-05-21stdio: implement assignment-allocation "m" characterMike Frysinger
The latest POSIX spec introduces a "m" character to allocate buffers for the user when using scanf type functions. This is like the old glibc "a" flag, but now standardized. With packages starting to use these, we need to implement it. for example: char *s; sscanf("foo", "%ms", &s); printf("%s\n", s); free(s); This will automatically allocate storage for "s", read in "foo" to it, and then display it. I'm not terribly familiar with the stdio layer, so this could be wrong. But it seems to work for me. Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2012-05-03config: tweak STRICT_HEADERS descriptionBernhard Reutner-Fischer
Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
2012-04-18config: Fix alphabetical sort order of targetsBernhard Reutner-Fischer
Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
2012-01-29config: ftw is SUSv4-obsoleteBernhard Reutner-Fischer
Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
2012-01-26buildsys: turn off forced EXTRA_WARNINGS on i386Bernhard Reutner-Fischer
Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
2012-01-02config: remove some redundant words in the menusMike Frysinger
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-12-22libcrypt: add support for SHA256-CRYPT password hashingWilliam Pitcock
This is based on Ulrich Drepper's implementation in GLIBC, but hacked up to work in uClibc. The differences from the GLIBC version are as follows: - b64_from_24bit() has been converted into a macro - Usage of GLIBC-isms (such as libc_freeres_ptr) have been removed It is enabled by the UCLIBC_HAS_SHA256_CRYPT_IMPL configuration symbol. You must have UCLIBC_HAS_CRYPT_IMPL enabled as well. Signed-off-by: William Pitcock <nenolod@dereferenced.org> Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
2011-12-22libcrypt: add support for SHA512-CRYPT password hashingWilliam Pitcock
This is based on Ulrich Drepper's implementation in GLIBC, but hacked up to work in uClibc. The differences from the GLIBC version are as follows: - b64_from_24bit() has been converted into a macro - Usage of GLIBC-isms (such as libc_freeres_ptr) have been removed It is enabled by the UCLIBC_HAS_SHA512_CRYPT_IMPL configuration symbol. You must have UCLIBC_HAS_CRYPT_IMPL enabled as well. Signed-off-by: William Pitcock <nenolod@dereferenced.org> Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
2011-11-20stdio: add support for "e" flag with fopen()Mike Frysinger
Support this useful glibc extension for optionally setting O_CLOEXEC on fopen streams. Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-11-04config: document eventfdBernhard Reutner-Fischer
in LINUX_SPECIFIC Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
2011-11-02stubs: handle linux module functionsBernhard Reutner-Fischer
Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
2011-11-02stubs: handle linux-specificBernhard Reutner-Fischer
Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
2011-10-27resolver: add a dependencies for DNS resolver featureCarmelo Amoroso
DNS resolver needs at least IPV4 or IPV6 support enabled to be correctly built. Add such dependency. Signed-off-by: Carmelo Amoroso <carmelo.amoroso@st.com>
2011-10-25ldso: let people disable to lookup into LD_LIBRARY_PATHCarmelo Amoroso
On hardened system it could be useful to disable the use of LD_LIBRARY_PATH. Signed-off-by: Carmelo Amoroso <carmelo.amoroso@st.com>
2011-10-25config: revise defconfigs strategyCarmelo Amoroso
Revise the way defconfigs are defined, by renaming them from defconfigs/<arch> to defconfigs/<arch>/defconfig. It allows to have multiple defconfigs per arch. Signed-off-by: Carmelo Amoroso <carmelo.amoroso@st.com>
2011-10-14Config.in: fix erroneously deleted lineBernhard Reutner-Fischer
blame e9d74358093b61e2e597fa9e066ba0468df14cba Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
2011-10-06microblaze mmu/elf/shared lib supportRyan Flux
microblaze can either be with mmu or without If with, use elf rather than flat, and support shared libs Signed-off-by: Ryan Flux <ryan.flux@emsolutions.com.au> Signed-off-by: Steve Bennett <steveb@workware.net.au> Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
2011-10-06microblaze can be either big or little endianSteve Bennett
Signed-off-by: Steve Bennett <steveb@workware.net.au> Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
2011-10-06microblaze has long double support tooRyan Flux
Signed-off-by: Ryan Flux <ryan.flux@emsolutions.com.au> Signed-off-by: Steve Bennett <steveb@workware.net.au> Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
2011-09-12config: tweak help textBernhard Reutner-Fischer
Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
2011-08-26inet/resolv: add ns_{put,get}{16,32}Daniel Mack
This patch introduces a new config directive 'UCLIBC_HAS_RESOLVER_SUPPORT' and adds the new symbols conditionally. Signed-off-by: Daniel Mack <zonque@gmail.com>
2011-08-26extra/Configs/Config.in: drop "default n" linesDaniel Mack
"default n" is the default default. No need to mention it explicitly. Signed-off-by: Daniel Mack <zonque@gmail.com>
2011-07-25libdl: add option for controlling dl_cleanupRichard Braun
When debugging memory leaks with Valgrind, it is required that dynamically loaded shared objects are not unloaded when a process exits, otherwise symbols from those files aren't correctly resolved in allocation traces. This patch adds the LDSO_NO_CLEANUP configuration option to control this behaviour. Signed-off-by: Richard Braun <rbraun@sceen.net> Signed-off-by: Carmelo Amoroso <carmelo.amoroso@st.com>
2011-07-01Config.in.arch: Free UCLIBC_HAS_FPU setting from depending on UCLIBC_HAS_FLOATSKhem Raj
UCLIBC_HAS_FLOATS and UCLIBC_HAS_FPU are denoting two different aspects. UCLIBC_HAS_FLOATS covers the floating point operations which has nothing to do if you have FPU or not. Signed-off-by: Khem Raj <raj.khem@gmail.com>
2011-06-24Merge remote-tracking branch 'origin/master' into prelinkCarmelo Amoroso
* origin/master: (61 commits) fts: fix warning due to old-style function definition ldso_tls: fix compiler warning due to missing cast resolv: fix bug in res_init with ipv6 nameservers config: Fix passing defconfig args buildsys: pt-initfini.s depends on uClibc_config.h libdl: search for ELF_RTYPE_CLASS_DLSYM in dlsym() resolv: try next server on SERVFAIL getaddrinfo: allow numeric service without any hints bump version to 0.9.33-git nptl/pthread: Correct path for machine specific pt-initfini.c ctor/dtor nptl: Fix init and fini function compilation Rules.mak: Rearrange appending UCLIBC_EXTRA_CFLAGS to CFLAGS ARM: remove EABI/OABI selection ARM: detect BX availibility at build time ARM: #include <bits/arm_asm.h> where __USE_BX__ is used ARM: transform the EABI/OABI choice into a boolean ARM: remove sub-arch/variants selection from menuconfig ARM: introduce blind options to select & force THUMB mode ARM: reorder "Use BX" option Fix __libc_epoll_pwait compile failure on x86 ... Conflicts: ldso/libdl/libdl.c Signed-off-by: Carmelo Amoroso <carmelo.amoroso@st.com>
2011-06-11ARM: detect BX availibility at build timeYann E. MORIN
The "use BX" option is now a suggestion that BX be used if available. Use a macro to detect if BX is available at build time. If so, and the user requested it be used, then use it. Otherwise, error out. Macro courtesy Khem RAJ: http://lists.uclibc.org/pipermail/uclibc/2009-April/042301.html Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr> Cc: Khem Raj <raj.khem@gmail.com> Cc: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com> Cc: Carmelo AMOROSO <carmelo.amoroso@st.com> Signed-off-by: Khem Raj <raj.khem@gmail.com>
2011-06-11ARM: transform the EABI/OABI choice into a booleanYann E. MORIN
The CONFIG_ARM_OABI option is never used. Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr> Cc: Khem Raj <raj.khem@gmail.com> Cc: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com> Cc: Carmelo AMOROSO <carmelo.amoroso@st.com> Signed-off-by: Khem Raj <raj.khem@gmail.com>
2011-06-11ARM: remove sub-arch/variants selection from menuconfigYann E. MORIN
Rely on the compiler to be correctly set up to generate appropriate code for the target variant. This exposes the Thumb option, as it is no longer auto-selected. The "Use BX" no longer depends on supported CPU to be selected, so it now defaults to 'n' as it shall work by default on CPUs that do not have BX. Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr> Cc: Khem Raj <raj.khem@gmail.com> Cc: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com> Cc: Carmelo AMOROSO <carmelo.amoroso@st.com> Signed-off-by: Khem Raj <raj.khem@gmail.com>
2011-06-11ARM: introduce blind options to select & force THUMB modeYann E. MORIN
Add three new blind options to set use of Thumb mode: - COMPILE_IN_THUMB_MODE - if set, CFLAGS will contain -mthumb - if unset, the compiler's default is used - HAS_THUMB - CPUS with Thumb instruction set can select this - use of BX depends on this - FORCE_THUMB - CPUs that are Thumb-only must select this - this selects: HAS_THUMB, COMPILE_IN_THUMB_MODE and USE_BX Also, remove leading space in Rules.mak. Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr> Cc: Khem Raj <raj.khem@gmail.com> Cc: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com> Cc: Carmelo AMOROSO <carmelo.amoroso@st.com> Signed-off-by: Khem Raj <raj.khem@gmail.com>
2011-06-11ARM: reorder "Use BX" optionYann E. MORIN
"Use BX" is not available on all CPUs, so the option depends on a correct CPU to be chosen . It is weird that e BX" then appears _above_ the CPU selection, not below. Move the "Use BX" after the CPU selection. Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr> Cc: Khem Raj <raj.khem@gmail.com> Cc: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com> Cc: Carmelo AMOROSO <carmelo.amoroso@st.com> Signed-off-by: Khem Raj <raj.khem@gmail.com>
2011-05-12linux_specific: handle accept4 and pipe2Bernhard Reutner-Fischer
Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
2011-05-11add pipe2()Bernhard Reutner-Fischer
Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
2011-05-04Merge remote-tracking branch 'origin/master' into prelinkCarmelo Amoroso
* origin/master: (32 commits) libubacktrace: fix backtrace support on arm-eabi, which needs libgcc_eh linked too getaddrinfo.c: fix incorrect check for ERANGE from gethostbyaddr_r getaddrinfo.c: improve code readability. No functional changes string: remove unused variable x86_64: silence warning if !TLS buildsys: prettify ssp.c handling madvise is LINUX_SPECIFIC test_nptl: fix expected result for tst-cputimer[123] test_nptl: fix expected result for tst-clock2 test buildsys: make $(LOCAL_INSTALL_PATH) phony ether_aton: reject invalid input tests: disable ether tests if !HAS_SOCKET inet: add ether_aton testcase sysconf: clock_getres depends on HAS_REALTIME __rt_sigwaitinfo: depends on HAS_REALTIME buildsys: minor fixes in Makefile.arch for C6X buildsys: minor fixes in Makefile.arch for microblaze libubacktrace: enabled for all archs indeed. sparc: don't access fp registers when configured for no fpu libubacktrace: generic implementation based dwarf ... Conflicts: ldso/ldso/dl-elf.c ldso/ldso/mips/elfinterp.c ldso/ldso/x86_64/elfinterp.c Signed-off-by: Carmelo Amoroso <carmelo.amoroso@st.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-25 23:56:46 +0000