summaryrefslogtreecommitdiff
path: root/extra/Configs
AgeCommit message (Collapse)Author
2008-10-14- fix locale dependencies and make default locale generation less verbose.Bernhard Reutner-Fischer
The verbosity can be set to the previous level by passing V=2 to make.
2008-10-06- mention the architectures that currently support fenv(3).Bernhard Reutner-Fischer
i387 works (could be that it works on x86_64, untested), sse code disabled.
2008-10-06- wrap overlong linesBernhard Reutner-Fischer
2008-10-06- move helptexts to their config symbols so that they are actually displayedBernhard Reutner-Fischer
TODO: trick kconfig into displaying choice help properly
2008-10-06- disentangle REALTIME from ADVANCED_REALTIME (Peter S. Mazinger)Bernhard Reutner-Fischer
2008-10-03- add long double math wrappers (Ned Ludd)Bernhard Reutner-Fischer
2008-09-29- do not pass bitwise-or to the assembler. Closes #3164Bernhard Reutner-Fischer
2008-09-25- add CONFIG_MIPS_ISA_MIPS32R2 (Julian Brown)Bernhard Reutner-Fischer
2008-09-25- RPC support currently requires either IPv4 and/or IPv6 supportBernhard Reutner-Fischer
2008-09-25- adjust helptextBernhard Reutner-Fischer
2008-09-15Make menuconfig help bigger and fluffier.Rob Landley
2008-09-09Add optimized memcpy implementation for sh4 (from Stuart Menefy ↵Carmelo Amoroso
@STMicroelectronics). This implementation is based on 'backward copying'. Signed-off-by: Carmelo Amoroso <carmelo.amoroso@st.com>
2008-09-09- adjust range of valid grp buffer size to match pwd buffer sizeBernhard Reutner-Fischer
2008-08-27- flesh out helptext of DOMULTI.Bernhard Reutner-Fischer
Put short, just leave it alone or keep all parts -- alternatively go help with lto if you have time.
2008-07-14- do not force LFS unto x86_64 folksBernhard Reutner-Fischer
vapier, you added this in r12384. What was the reasoning back then?
2008-07-08New .config option UCLIBC_HAS_STUBS, enables fork() stub on NOMMUDenis Vlasenko
2008-06-27Added support for the AI_ADDRCONFIG flag in the hints->ai_flags parameter to ↵Ricard Wanderlof
getaddrinfo(3).
2008-06-07- if UNIX98PTY_ONLY is not set then we're in legacy land anyway which needsBernhard Reutner-Fischer
UCLIBC_HAS_GETPT unconditionally for __libc_ptyname{1,2}[] and related bloat.
2008-06-05- make libcrypt optional. Untested.Bernhard Reutner-Fischer
2008-06-05- fix keyword "depends on"Bernhard Reutner-Fischer
2008-06-05- linuxthreads and linuxthreads.old need nanosleep()Bernhard Reutner-Fischer
2008-06-03- adds several config-options to allow for turning off certain featuresBernhard Reutner-Fischer
like o UCLIBC_HAS_GNU_ERROR o UCLIBC_HAS_BSD_ERR o UCLIBC_HAS_PTY o UCLIBC_HAS_GETPT (1) o UCLIBC_SYSCALL_STUBS o UCLIBC_SYSCALL_STUB_WARNING o UCLIBC_LINUX_SPECIFIC (2) o UCLIBC_BSD_SPECIFIC (3) o UCLIBC_NTP_LEGACY (4) o UCLIBC_SV4_DEPRECATED (5) o UCLIBC_HAVE_REALTIME (6) o UCLIBC_HAVE_ADVANCED_REALTIME (7) o UCLIBC_HAVE_EPOLL (8) o UCLIBC_HAVE_XATTR (9) o UCLIBC_HAVE_PROFILING (10) (1) make non-standard getpt optional and implement standard posix_openpt (2) fstatfs(), inotify_*(), ioperm(), iopl(), madvise(), modify_ldt(), personality() ppoll(), setresuid() (3) mincore(), getdomainname(), setdomainname() (4) ntp_adjtime(), ntp_gettime() aliases (5) ustat() [use statfs(2) in your code instead] (6) All marked as "(REALTIME)" in SUSv3 (7) All marked as "(ADVANCED REALTIME)" in SUSv3 (8) epoll_create(), epoll_ctl(), epoll_wait() (9) all Extended Attributes (10) helpers for gcc's -finstrument-functions - Fixes _dl_exit() - Implements sleep(3) for !UCLIBC_HAVE_REALTIME - Implements usleep(3) for !UCLIBC_HAVE_REALTIME - adds #warning about incorrect posix_fadvise{,64}() - removes unused and unwanted uselib() Net outcome is that an allnoconfig with HAVE_SHARED is now about 88k instead of formerly 130k.
2008-06-02Rename HAVE_NO_SHARED to ARCH_HAS_NO_SHARED, otherwise it's too confusingDenis Vlasenko
with HAVE_SHARED
2008-05-31- default kernel-modules funcs to on.Bernhard Reutner-Fischer
2008-05-21- my manpage sais that init_module, create_module, query_module, delete_moduleBernhard Reutner-Fischer
were removed in linux-2.6
2008-04-25Fix some sh4 specific entriesCarmelo Amoroso
Signed-off-by: Carmelo Amoroso <carmelo.amoroso@st.com>
2008-04-24Fix whitespace damage in top level Config.in.Hans-Christian Egtvedt
2008-04-16Fix whitespace damage in Config.avr32.Hans-Christian Egtvedt
2008-03-26Paul Brook writes:Bernhard Reutner-Fischer
The attached patch adds support for compiling arm uClibc as pure Thumb code. This is needed because some recent ARM codes do not implement traditional ARM mode. Specifically: * Cortex-M1 - An extremely minimal FPGA based core that only implements Thumb-1 (aka ARMv6-M). * Cortex-M3 - A Thumb-2 only ARMv7-M core. Most of uClibc already builds in Thumb mode, all that is left are a handful of assembly bits. Tested on arm-uclinuxeabi.
2008-01-19- wrap superlong linesBernhard Reutner-Fischer
2008-01-19- add C99 floating point environment, rounding and exception handling functionsBernhard Reutner-Fischer
for i386. UCLIBC_HAS_FENV
2008-01-17- remove unused fileBernhard Reutner-Fischer
2008-01-05Chris Zankel writes:Mike Frysinger
The following patches add support for the Xtensa processor architecture to uClibc. They are based on a recent SVN checkout (12/05/2007). The first patch (attached to this post) adds Xtensa support to various shared configuration and make files. The following patches then include the Xtensa specific files and directories. I welcome any feedback and would appreciate it if you could include the patches into the mainline tree. I am certainly committed to maintain the port. Bob Wilson was kind enough to review the patches. Some notes about the architecture: Xtensa is a configurable and extensible processor architecture developed by Tensilica. For more information, please visit: www.linux-xtensa.org.
2008-01-05not everyone is a ninja: explicitly state that people should convert from ↵Mike Frysinger
sys_errlist[] to strerror()
2007-11-16Added AVR32 support to uClibc. Signed-off-by: Hans-Christian Egtvedt ↵Carmelo Amoroso
<hcegtvedt@atmel.com>
2007-11-07Added support for GNU hash style into dynamic linkerCarmelo Amoroso
2007-09-20- spelling fixBernhard Reutner-Fischer
2007-09-15bug 1310: drop hidden aliases to data since some arches crap with this due ↵Mike Frysinger
to copy relocs
2007-04-17- shrink resolver codeBernhard Reutner-Fischer
2007-04-14- doesn't make sense to impose a limit that is too narrow. 12 ought to be fine..Bernhard Reutner-Fischer
2007-04-13Patch by Ricard Wanderlof <ricardw at axis dot com>:Peter Kjellerstedt
* Add configurable buffer sizes for getpwnam() and getgrnam(). The default buffer size is, as before, 256 (glibc seems to use 1024 by default).
2007-03-20- add arm1176 optionsBernhard Reutner-Fischer
2007-03-16No configs actually set LIBGCC_CFLAGS to anything, and it's not even Rob Landley
written into the resulting .config, so remove it.
2007-02-18default to pulling kernel headers from the system installMike Frysinger
2007-02-14make arch default to hostarchMike Frysinger
2007-02-14make sure we declare TARGET_ARCH as a stringMike Frysinger
2007-02-13cleanup styleMike Frysinger
2007-02-12Rehash the PowerPC e500 port to avoid creating symlinks Joakim Tjernlund
in the powerpc arch code and make more code common with classic PowerPC. From Steve Papacharalambous Lets hope I didn't break something.
2007-02-04Add support for PowerPC e500, libc part only.Joakim Tjernlund
Math support to be done. From Steve Papacharalambous, stevep@freescale.com
2007-01-03- s/Attemt/Attempt/Bernhard Reutner-Fischer
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-05 05:40:31 +0000