summaryrefslogtreecommitdiff
path: root/extra/Configs/Config.in
AgeCommit message (Collapse)Author
2004-12-22Patch from Peter S. Mazinger:Eric Andersen
rename UCLIBC_PIE_SUPPORT to UCLIBC_BUILD_PIE
2004-12-22Patch from Peter S. Mazinger to simplify PIE handlingEric Andersen
2004-12-21Add support for the Analog Devices Blackfin mmuless processorEric Andersen
2004-12-20- Added support for 13 new syscalls to allow more things to compile when ↵Ned Ludd
using uClibc. mincore() and the ones for Extended Attributes setxattr(), lsetxattr(), fsetxattr(), getxattr(), lgetxattr(), fgetxattr(), listxattr(), llistxattr(), flistxattr(), removexattr(), lremovexattr(), fremovexattr() which are optional.
2004-10-06Puts common defines into dl-defs.h (in ldso/include) from dl-elf.h andJoakim Tjernlund
dl-cache.h and make use of it. Also disables the lib-path-redundancy check for the case the cache is not used. Makes use of _PRELOAD_FILE_SUPPORT. From Peter Mazinger.
2004-10-06PIE option correction for Config.in. From Peter Mazinger.Joakim Tjernlund
2004-10-05Peter Kjellerstedt writes:Joakim Tjernlund
After the addition of a configuration option for enabling the support of /etc/ld.so.cache, I thought it might be a good idea to add one for the support of the /etc/ld.so.preload file too. So here it is. While doing this, I also noticed that the dynamic linker would hang indefinitely if either LD_PRELOAD or /etc/ld.so.preload contained a library which was already loaded, so I made a patch for that too. And of course, I could not resist from doing a little clean up of comments and indentation, so here is a patch for that too.
2004-10-03This patch from Mike Frysinger, extended from an earlier patch from Peter S.Eric Andersen
Mazinger implements the changes suggested by me on the uclibc list. On Tuesday 28 September 2004 02:24 pm, Erik Andersen wrote: > What I think should be done is > > *) Someone that cares about USE_CACHE should fix that option > up to be sure it works, and give it a proper config entry > in extra/Configs/Config.in, and rename it to something > more appropriate such as LDSO_CACHE_SUPPORT. > > *) When LDSO_CACHE_SUPPORT=n, UCLIBC_RUNTIME_PREFIX /usr/X11R6/lib > should be included in the default library search path in > dl-elf.c, ldd, and ldconfig. > > *) When LDSO_CACHE_SUPPORT=y, UCLIBC_RUNTIME_PREFIX /usr/X11R6/lib > should be excluded from the default library search path in > dl-elf.c, ldd, and ldconfig, and those wishing to include > X11 stuff should add that into /etc/ld.so.conf and re-run > ldconfig. > > *) At present, LDSO_CONF and LDSO_CACHE use the same names > and same structure as glibc. This precludes > LDSO_CACHE_SUPPORT being uses in any sane fashion on a > dial glibc and uClibc system. Just as it was necessary > for use to use a different name for 'libuClibc' rather > than 'libc', and 'ld-uClibc.so.0' rather than > 'ld-linux.so.2' it seems that these configuration files > really ought to be given different names. >
2004-09-07uClibc gettext support is under development and really shouldn'tEric Andersen
be used by the unsuspecting masses quite yet.
2004-09-02Add a couple of mips-specific string funcs.Manuel Novoa III
Port the generic optimized string funcs from glibc, with some tweaks to cut their size a little. The main change is making memmove call memcpy for forward copying to trim redundant code. Make use of both the generic and arch-specific speed-optimized string funcs configurable. Arch-specific take precedence over generic, and generic takes precedence over basic size-optimized uClibc funcs.
2004-08-28solar asked that this bit be reverted.Manuel Novoa III
2004-08-26Fixes from gentoo.Manuel Novoa III
2004-08-21Kill off all support for 'gcc -pg' / 'gprof' style profiling. There is both aEric Andersen
size and performance penalty to profiling applications this way, as well as Heisenberg effects, where the act of measuring changes what is measured. There are better tools for doing profiling, such as OProfile, that do not require gcc to instrument the application code. -Erik
2004-07-16Pete Popov writes:Eric Andersen
Hi Erik, I'm not sure why the NIOS support is not in uClibc -- perhaps the patch was rejected or never submitted? In any case, I'm playing with some NIOS stuff and created this patch against 0.9.26. The work was done by Microtronix. I'm not sure who else contributed to it. It would be great to have the NIOS support available in uClibc so developers don't have to go searching for these bits. Pete
2004-05-07UCLIBC_COMPLETELY_PIC does nothing, so kill itEric Andersen
2004-03-09More detail about malloc-simpleEric Andersen
2004-02-18Alexandre Oliva writes:Eric Andersen
This patch adds code to uClibc to support a new ABI designed for the FR-V architecture, that enables text segments of executables and shared libraries to be shared by multiple processes on an OS such as uClinux, that can run on FR-V processors without an MMU. Patches for binutils and GCC have just been posted in the corresponding mailing lists. The binutils patch was approved, but there's one additional patch pending review, that I posted this week. An updated GCC patch will be posted to gcc-patches@gcc.gnu.org as soon as I complete testing (I used a known-good compiler to test the uClibc patch below). Since the existing dynamic loader code didn't support independent relocation of segments, it required changes that were somewhat extensive. I've added a number of new machine-specific macros to try to keep the platform and ABI-specific details outside the generic code. I hope this is not a problem.
2004-01-16s/UCLIBC_HAS_MMU/ARCH_HAS_MMU/gEric Andersen
2004-01-02Peter S. Mazinger writes:Eric Andersen
Hello Erik! I have made some cosmetical changes to the files, removed the added SCRT=-fPIC option from building the crt0.S file (but it is a requirement to build them with -fPIC), and changed some comments. I have left the ldso.c patch with PIE_SUPPORT ifdefs, but consider applying it w/o them (see some earlier comment from PaX Team on this issue, as it is considered a bug). To have it work correctly, you'll also need removing COMPLETELY_PIC. One thing is missing: PIE_SUPPORT should be usable only for i386 (for now). Also added the support for propolice protection (that works for me and catches memcpy/strcpy attacks (but needs a special gcc version). Thanks, Peter
2003-12-30Rework malloc. The new default implementation is based on dlmalloc from DougEric Andersen
Lea. It is about 2x faster than the old malloc-930716, and behave itself much better -- it will properly release memory back to the system, and it uses a combination of brk() for small allocations and mmap() for larger allocations. -Erik
2003-12-04Set the default stdio buffer size to 4096, rather then 256.Eric Andersen
256 is fine of course, but many applications use this value and expect it to be larger.
2003-11-05Yet more messing with selecting sane default configsEric Andersen
2003-11-05Yet more config system updatesEric Andersen
2003-11-04Peter S. Mazinger writes:Eric Andersen
Hello! The latest changes document ldd in RUNTIME_PREFIX/bin, but it is installed in RUNTIME_PREFIX/usr/bin Peter
2003-11-04Naming things this way will be much easier to deal withEric Andersen
2003-11-04Rework the config system. Better utilize the Kconfig languageEric Andersen
which should simplify enabling arbitrary architectures. -Erik
2003-10-31Some more soft float fixes... for arm in particular (libfloat).Manuel Novoa III
Remove the ADD_LIBGCC_FUNCTIONS option and do things the right way. Either we have a shared libgcc available, or the libgcc routines aren't PIC and don't belong in the shared libc anyway.
2003-10-18Add a new RUNTIME_PREFIXEric Andersen
2003-10-16More detail on the use of MALLOC_DEBUGEric Andersen
2003-09-09Force Large File Support disabled on Cris, since somethingEric Andersen
appears to be wrong with their toolchain that is tickled by LFS.
2003-09-09Attack of the spelling police....Eric Andersen
2003-09-09Enable automagic locale data downloadsEric Andersen
2003-09-09Add in several config system updates for locale support.Eric Andersen
2003-09-09Fix wctype.c so that wchar can be enabled without ctype table-based functions.Manuel Novoa III
2003-09-08Add back in table-less ctype funcs for those interested in minimizingManuel Novoa III
static build sizes and not needing wchar support. Add in a SUSv3 getopt as an option for those not needing gnu getopt. Again, mainly for the static linking crowd.
2003-09-06Update old_vfconfig help and some dependencies.Manuel Novoa III
2003-09-06Let people enable ftw, make glob an option, add a new "Big and Tall"Eric Andersen
top level config menu.
2003-09-01Rob Landley writes:Eric Andersen
SYSTEM_DEVEL_PREFIX says: "This defaults to $(DEVEL_PREFIX)/usr", but it actually defaults to just "($DEVEL_PREFIX)". Just thought I'd mention it... :)
2003-08-24Reluctantly add wordexp()Eric Andersen
2003-08-08Add in a MALLOC_GLIBC_COMPAT option to let people decide if theyEric Andersen
want glibc style malloc(0) behavior
2003-08-05Shuffle options around a bitEric Andersen
2003-08-01Add a new *scanf implementation, includeing the *wscanf functions.Manuel Novoa III
Should be standards compliant and with several optional features, including support for hexadecimal float notation, locale awareness, glibc-like locale-specific digit grouping with the `'' flag, and positional arg support. I tested it pretty well (finding several bugs in glibc's scanf in the process), but it is brand new so be aware. The *wprintf functions now support floating point output. Also, a couple of bugs were squashed. Finally, %a/%A conversions are now implemented. Implement the glibc xlocale interface for thread-specific locale support. Also add the various *_l(args, locale_t loc_arg) funcs. NOTE!!! setlocale() is NOT threadsafe! NOTE!!! The strto{floating point} conversion functions are now locale aware. The also now support hexadecimal floating point notation. Add the wcsto{floating point} conversion functions. Fix a bug in mktime() related to dst. Note that unlike glibc's mktime, uClibc's version always normalizes the struct tm before attempting to determine the correct dst setting if tm_isdst == -1 on entry. Add a stub version of the libintl functions. (untested) Fixed a known memory leak in setlocale() related to the collation data. Add lots of new config options (which Erik agreed to sort out :-), including finally exposing some of the stripped down stdio configs. Be careful with those though, as they haven't been tested in a long time. (temporary) GOTCHAs... The ctype functions are currently incorrect for 8-bit locales. They will be fixed shortly. The ctype functions are now table-based, resulting in larger staticly linked binaries. I'll be adding an option to use the old approach in the stub locale configuration.
2003-06-27Add config option to enable 'struct tm' timezone extension fieldsEric Andersen
2003-03-04Seperate pthread debugging from uClibc debugging. They are usedEric Andersen
for different things.
2003-03-03Initial effort at adding profiling support.Eric Andersen
2003-02-05Patch from Stefan Allius to make adding libgcc functions to the library anEric Andersen
option, to avoid the possibility of adding non PIC code into the shared PIC uClibc library, thereby making the .text segment unshareable.
2002-12-13Only build the ncurses stuff when it is needed, based on aEric Andersen
patch from Stefan Allius (though the extra/config/Makefile rework is mine), -Erik
2002-12-02Spelling fixesEric Andersen
-Erik
2002-11-27Make support for global constructors and global destructors beEric Andersen
configurable, so people who do not need or want ctor/dtor support can disable it and make their binaries a little bit smaller. -Erik
2002-11-21Improve malloc debugging support.Miles Bader
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-16 02:21:21 +0000