Age | Commit message (Collapse) | Author |
|
|
|
|
|
TLS_LD should use linker-provided symbol _TLS_MODULE_BASE_ instead of
symbol it resolves to get thread pointer, otherwise linker relaxation
doesn't work correctly, adding extra offset to thread-local variable
address.
This fixes most of tls/tst-tls* tests.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
|
|
Native gdb makes a ptrace (GET_THREAD_AREA) which needs to return the
TP. however when libc sets up TP reg (for main thread), it doesn't call
arc_settls syscall so kernel doesn't know of TP register details
(moreso because clone doesnt have SETTLS flag)
Note that kernel doesn't know about r25 being TP etc.
This commit got lost in merge of NPTL tools into arc-mainline-dev and
showed up again as STAR 9000919529 (native gdb can't debug threaded
apps)
------->8---------------
[ARCLinux]# gdb ./pth
Reading symbols from ./pth...(no debugging symbols found)...done.
(gdb) b main
Breakpoint 1 at 0x106f2
(gdb) r
Starting program: /pth
[Thread debugging using libthread_db enabled]
Using host libthread_db library "/lib/libthread_db.so.1".
thread_get_info_callback: cannot get thread info: generic error
(gdb) q
------->8---------------
Debugged-by: Anton Kolesov <akolesov@synopsys.com>
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
|
|
ret_ERRVAL is used by mq_timedsend and mq_timedreceive, it needs to be
defined to retw, otherwise error return from those functions segfaults.
This fixes the following testsuite failures:
.... tst-mqueue1
FAIL tst-mqueue1 got 1 expected 0
Didn't expect signal from child: got `Segmentation fault'
.... tst-mqueue2
FAIL tst-mqueue2 got 1 expected 0
Didn't expect signal from child: got `Segmentation fault'
.... tst-mqueue3
FAIL tst-mqueue3 got 1 expected 0
Didn't expect signal from child: got `Segmentation fault'
.... tst-mqueue4
FAIL tst-mqueue4 got 1 expected 0
Didn't expect signal from child: got `Segmentation fault'
.... tst-mqueue5
FAIL tst-mqueue5 got 1 expected 0
Didn't expect signal from child: got `Segmentation fault'
.... tst-mqueue6
FAIL tst-mqueue6 got 1 expected 0
Didn't expect signal from child: got `Segmentation fault'
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
|
|
Cancellable syscalls use call8 to call functions that enable/disable
cancellation, thus they cannot use the default FRAMESIZE.
Redefine FRAMESIZE for such syscalls.
This fixes the following testsuite failure:
.... tst-mqueue8
FAIL tst-mqueue8 got 1 expected 0
going to cancel mq_receive in-time
in-time mq_receive cancellation succeeded
going to cancel mq_receive early
Didn't expect signal from child: got `Segmentation fault'
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
|
|
Fixes segfaults when gcc 5.1 is used for x86.
http://git.uclibc.org/uClibc/commit/ldso/ldso/i386/dl-sysdep.h?h=ldso-future&id=7de778389d0040be4a21ffc326310e0eb361570a
Mentioned in #uclibc.
|
|
When built with gcc 5.1, uClibc-ng fails to build with the following
issue:
librt/librt_so.a(rt-unwind-resume.oS): In function `_Unwind_Resume':
rt-unwind-resume.c:(.text+0x3c): undefined reference to
This commit fixes the code in a way similar to what was done in glibc
in commit:
https://sourceware.org/git/gitweb.cgi?p=glibc.git;a=commitdiff;h=175cef4163dd60f95106cfd5f593b8a4e09d02c9
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
|
|
|
|
|
|
into uClibc
|
|
Patch seen here:
http://lists.uclibc.org/pipermail/uclibc/2015-April/048892.html
|
|
|
|
|
|
7c721d31e4b7a0bdf6f803b8e7c38996bf60b59f
|
|
|
|
might come in via nptl so undef it before redefining it
Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
|
|
These days IPv6 is used more and more in different software
packages. And so we're adding IPv6 support by default in uClibc
for ARC cores.
Signed-off-by: Alexey Brodkin <Alexey.Brodkin@synopsys.com>
Cc: Vineet Gupta <vgupta@synopsys.com>
Cc: Anton Kolesov <akolesov@synopsys.com>
Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
|
|
Signed-off-by: Yoshinori Sato <ysato@users.sourceforge.jp>
Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
|
|
Signed-off-by: Yoshinori Sato <ysato@users.sourceforge.jp>
Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
|
|
- wire up new kernel
Signed-off-by: Yoshinori Sato <ysato@users.sourceforge.jp>
Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
|
|
- remove symbol prefix
- new startup
- new clone syscall support
Signed-off-by: Yoshinori Sato <ysato@users.sourceforge.jp>
Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
|
|
Signed-off-by: Yoshinori Sato <ysato@users.sourceforge.jp>
Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
|
|
- New toolchain
- Add new flags
Signed-off-by: Yoshinori Sato <ysato@users.sourceforge.jp>
Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
|
|
uClibc doesn't define signal info for the SIGSYS signal which is issued
in case of hitting a syscall prohibited by seccomp.
This is sad as it makes debugging seccomp filter policies impossible on
some architectures (at least ARM and PowerPC, maybe also others) which
do not coincidentally set si_value.sival_int as the syscall number.
To fix this, import the definitions and macros needed from glibc.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
|
|
When attempting to build uClibc under buildroot, including building the
tests, the silly tests don't currently compile, a result of attempting
to build using a compiler that does not yet have an installed version of
uClibc available. The error is a missing header file, specifically
atomic.h.
Taking inspiration from the nptl tests, I have extended the EXTRA_CFLAGS
variable to add the required include paths. The tests can now be built
under buildroot.
Signed-off-by: Andrew Burgess <andrew.burgess@embecosm.com>
Acked-by: Vineet Gupta <vgupta@synopsys.com>
Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
|
|
The current code implements the 'm' modifier only for 's'
conversions and would cause a segfault if it was used for 'c'
or '[' conversions. This patch extends the code to cover these
cases too.
The original version could write scanned data outside the passed buffer
because index i used in the '[' conversion handling block was clobbered.
Signed-off-by: Will Newton <will.newton@imgtec.com>
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
|
|
Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
|
|
(__pthread_initialize_minimal_internal): Initialize pd->report_events
to that.
This patch helps NPTL report TD_CREATE event, so that GDB could catch the
event and update its thread_list.
Link: http://lists.uclibc.org/pipermail/uclibc/2015-April/048921.html
[shengyong:
- original patch from glibc: commit 7d9d8bd18906fdd17364f372b160d7ab896ce909
- context adjust
- update nptl_db/ChangeLog]
Signed-off-by: Roland McGrath <roland@gnu.org>
Signed-off-by: Sheng Yong <shengyong1@huawei.com>
Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
|
|
pt-initfini eventually depends on xlocale
Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
|
|
Would fix: date -u +%4Y%2m%2d%2H%2M%2S
Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
|
|
Previously V=1 did print abbreviated commands and V=2 the full commands.
Kbuild-based build-systems behave in the opposite way and this is
apparently confusing or inconvenient for users so swap our V handling to
be in line with kbuild (and automake as far as V=0 / V=1 is concerned).
Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
|
|
Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
|
|
Required for !NPTL, !context-funcs for example.
Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
|
|
The list might not exist on target when cross-compiling.
|
|
|
|
This reverts commit bd3eaf83ef1b4954b6c0e7ba8bbdd29b2cd4a833.
They are now implemented.
|
|
As reported by Alexey Brodkin <Alexey.Brodkin@synopsys.com>
these tests do not fail anymore. After upgrading binutils/gcc
tests compile fine.
|
|
|
|
As reported by Buildroot autobuilder following options were missing:
* Libutil stub (UCLIBC_HAS_LIBUTIL option)
http://autobuild.buildroot.org/results/ce3/ce39eb9b9ece0968563641fb2207099d1a37b191/
* Program_invocation_name (UCLIBC_HAS_PROGRAM_INVOCATION_NAME=y)
http://autobuild.buildroot.org/results/154/1546d909e606daefd41b87dece94d642c0fdeba4/
http://autobuild.buildroot.org/results/bd5/bd54581d7b0cc73bc501072d27e870a443dfce79/
* Ifaddrd support (UCLIBC_SUPPORT_AI_ADDRCONFIG=y)
http://autobuild.buildroot.org/results/134/134e78ef1fa87f7fbf26c23ec5dfc68785d79613/
* Libnsl (UCLIBC_HAS_LIBNSL_STUB=y)
http://autobuild.buildroot.net/results/331/331ed781b422448205fb9e7c9730ec0c438d6306/
http://autobuild.buildroot.net/results/402/402d64965ac7ac6e1d4e1990080394958802fe8c/
http://autobuild.buildroot.net/results/960/9605bac2972d3e3d3fb91947ae6921e89210247b/
http://autobuild.buildroot.net/results/6b6/6b61ea80a3a6dcead233c4b408eba8b8d647e841/
* UTMP got reworked recently, which breaks packages such as busybox, gdbserver
etc so enable that too
Enabling mentioned options to make sure more packages could be built with ARC pre-built uClibc tools.
Note UCLIBC_USE_NETLINK is a prerequisite for UCLIBC_SUPPORT_AI_ADDRCONFIG.
Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
Cc: Anton Kolesov <akolesov@synopsys.com>
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
|
|
since ae9e3f46 sched.h pulls in stdlib.h (for malloc() and free()) and
thus also xlocale..
Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
|
|
Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
|
|
It seems the condition was reversed which lead to e.g. arm-920t being
confused
Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
|
|
There seems to be a bug in gold with static TLS at least on x86_64 (?)
Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
|
|
in early debugging code
Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
|
|
Saves a couple of bytes
Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
|
|
When compiling python you get duplicate symbol problem.
Seen in the autobuilders of buildroot project.
|
|
|
|
|
|
In file included from ./include/sys/syscall.h:33:0,
from libc/sysdeps/linux/common/sync_file_range.c:10:
libc/sysdeps/linux/common/sync_file_range.c: In function '__sync_file_range_nocancel':
./include/bits/syscalls.h:144:16: error: conflicting types for '_v3'
register int _v3 __asm__ ("v3") = _v3tmp;
^
./libc/sysdeps/linux/arm/sysdep.h:281:7: note: in expansion of macro 'LOAD_ARGS_7'
LOAD_ARGS_##nr (args) \
^
./libc/sysdeps/linux/arm/sysdep.h:324:2: note: in expansion of macro 'INTERNAL_SYSCALL_RAW'
INTERNAL_SYSCALL_RAW(SYS_ify(name), err, nr, args)
^
./libc/sysdeps/linux/arm/sysdep.h:256:40: note: in expansion of macro 'INTERNAL_SYSCALL'
({ unsigned int _inline_sys_result = INTERNAL_SYSCALL (name, , nr, args); \
^
libc/sysdeps/linux/common/sync_file_range.c:32:9: note: in expansion of macro 'INLINE_SYSCALL'
return INLINE_SYSCALL(sync_file_range, 7, fd, 0,
^
In file included from ./libpthread/nptl/sysdeps/unix/sysv/linux/arm/sysdep-cancel.h:18:0,
from ./include/cancel.h:58,
from libc/sysdeps/linux/common/sync_file_range.c:15:
./libc/sysdeps/linux/arm/sysdep.h:280:21: note: previous definition of '_v3' was here
register int *_v3 __asm__ ("v3") = _sys_buf; \
...
Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
|