Age | Commit message (Collapse) | Author |
|
We switched to detailed per-release Changelog some time ago, available
on the website.
Move the old Changelog for historical reasons.
Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
|
|
Native GDB requires elf_fpregset_t to be defined, even if floating point
registers are absent. In this case we use empty structure. Additionally we
redefined prfpregset_t to use this new type.
And there has been an error: it was defined that user_regs_struct has 20
registers, while it has 40.
Signed-off-by: Anton Kolesov <Anton.Kolesov@synopsys.com>
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
|
|
This showed up due to longstanding test/unistd/clone failure where post
clone, the callback was not exiting and rather falling thru in into main
program.
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
|
|
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
|
|
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
|
|
- Use syscalls-common.h vers of INTERNAL_SYSCALL / INLINE_SYSCALL_NOERR
- INLINE_SYSCALL takes syscall name (e.g. write)
- {INLINE,INTERNAL}_SYSCALL_NCS macros take syscall num (__NR_write)
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
|
|
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
Cc: Mike Frysinger <vapier@gentoo.org>
Cc: Denys Vlasenko <vda.linux@googlemail.com>
Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
|
|
For ARC builds atleast, __NR_xxx was not trickling into in open64.c
causing open64->openat a needless detour via open
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
|
|
When x86_64 cpu contains 'cpu_has_xsave' flag(in kernel),call the
pthread_cancel will have a segmentation fault. Because gcc could
not find the end of stack in user signal stack.
Signed-off-by: Zhang Pu <glen4linux@gmail.com>
Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
|
|
As Will noticed, the header this check is currently done in
is asm-only, and is not meant to be included from C code.
This breaks compilation when compiled for a Thumb2-aware CPU.
Move the BX check to its own header, and revert 7a246fd.
Reported-by: Will Newton <will.newton@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Cc: Will Newton <will.newton@gmail.com>
Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
|
|
When compiling against the 2.6.18 kernel headers, during linking of
the NPTL library it runs into a "undefined reference to PRIVATE_FUTEX"
error in pthread_cond_timedwait.S. This resolves the problem by
ensuring that the definition for PRIVATE_FUTEX is made available to
pthread_cond_timedwait.S.
Signed-off-by: Dan Moulding <dan.moulding@rackwareinc.com>
Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
|
|
The conditional load needs to be made part of an IT block on Thumb2
cores.
Signed-off-by: Will Newton <will.newton@linaro.org>
Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
|
|
Gregory Fong noted that we'd better not install atomic.h
Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
|
|
Commit e1420eca7374cd8f583e9d774c890645a205aaee fixed a bug where a
response code should mean the next server is tried. However, it tries
only the next search domain, and never skips to the next server. This
fix makes sure we try the next server on SERVFAIL.
Signed-off-by: Michel Stam <michel@reverze.net>
Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
|
|
The ULPs format in glibc has changed slightly and now deviates from
that in uClibc, so when using the files directly from glibc, for
certain types of tests the ULPs values were incorrectly defaulting to
0 rather than using the values provided. This caused some tests to
fail despite the max ULPs being correctly marked.
Regenerated and updated part of the ULPs file to fix this issue. This
also added values for exp and log.
Signed-off-by: Gregory Fong <gregory.0xf0@gmail.com>
Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
|
|
The table format is thrown off a bit because some of these names are
too long to fit the previous format so they were put on their own
lines.
Signed-off-by: Gregory Fong <gregory.0xf0@gmail.com>
Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
|
|
These should have been protected by
if (_dl_debug_reloc && _dl_debug_detail)
, but since the previous change "ldso/mips: actually print results of
each relocation" makes this redundant, just eliminate these prints
instead. I think this is the only item that is still printing
regardless of the value of LD_DEBUG when uClibc is built with
SUPPORT_LD_DEBUG=y.
Signed-off-by: Gregory Fong <gregory.0xf0@gmail.com>
Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
|
|
The patched line was outside of the body of the loop over relocations
and so would only print the results of the last relocation, fix that.
Signed-off-by: Gregory Fong <gregory.0xf0@gmail.com>
Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
|
|
Apparently i made a typo when applying
278a06d7abcc8774ba9bb9c15779749c7e2d68cd
sorry..
Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
|
|
Patch "LT.old: Make __errno_location/__h_errno_location thread safe"
uncovered yet another bug with static linking and errno (hopefully this
is last of them all).
Currently, __errno_location is declared weak but is defined strong.
While this provides with the desired weak semantics in dso, it
is subtly broken in static links.
Quoting Joern Rennecke (ARC gcc expert):
| I think the issue is that you declare the function as weak in the
| header file. That is a rare instance where you want the reference
| use declaration that differs a bit from the definition.
| If the reference uses a weakly declared function, that creates a
| weakref, i.e. the linker won't bother to look for this symbol at
| all - if it gets linked in for some other reason, fine,
| otherwise, it stays zero.
So the solution to declare strong, define weak.
Supporting data
-----------------
orig code: ARM mmap wrapper (LT.old build + my prev patch for errno)
_mmap:
@ args = 8, pretend = 0, frame = 0
@ frame_needed = 0, uses_anonymous_args = 0
stmfd sp!, {r4, r5, r7, lr}
ldr r5, [sp, #20]
movs ip, r5, asl #20
beq .L2
bl __errno_location(PLT)
mov r3, #22
str r3, [r0, #0]
mvn r0, #0
...
...
.weak __errno_location
A statically linked hello world program which uses mmap too.
As we can see__errno_location is completely gone - which is
semantically wrong - we need functional errno.
00008274 <__GI_mmap>:
8274: e92d40b0 push {r4, r5, r7, lr}
8278: e59d5014 ldr r5, [sp, #20]
827c: e1b0ca05 lsls ip, r5, #20
8280: 0a000004 beq 8298
8284: e320f000 nop {0}
^^^^^^^^^^
8288: e3a03016 mov r3, #22
828c: e5803000 str r3, [r0]
8290: e3e00000 mvn r0, #0
This in turn is due to a fixup in ARM ld which transforms branch-to-null
into a nop. It is better than crashing but still wrong since errno
handling is removed.
With the patch, errno_location is restored back in test program.
00008274 <__GI_mmap>:
8274: e92d40b0 push {r4, r5, r7, lr}
8278: e59d5014 ldr r5, [sp, #20]
827c: e1b0ca05 lsls ip, r5, #20
8280: 0a000004 beq 8298 <__GI_mmap+0x24>
8284: eb000010 bl 82cc <__errno_location>
8288: e3a03016 mov r3, #22
828c: e5803000 str r3, [r0]
Cc: Christian Ruppert <christian.ruppert@abilis.com>
CC: Francois Bedard <Francois.Bedard@synopsys.com>
Cc: Anton Kolesov <Anton.Kolesov@synopsys.com>
Cc: Joern Rennecke <joern.rennecke@embecosm.com>
Cc: Jeremy Bennett <jeremy.bennett@embecosm.com>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Peter Korsgaard <peter@korsgaard.com>
Cc: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
|
|
WHY: errno in uClibc is not thread safe
HOW: __errno_location and it's sibling __h_errno_location need to be called
via PLT - even from within libc. That way when linked with pthread,
intra-uClibc callers will also use the thread safe version.
This is achieved by removing the GI alias for these functions,
ensuring that they get called normally (via PLT)
Verified with ARC LT.old and ARM cubieboard2 buildroot (LT.old)
NPTL is unaffected by this bug.
------------ History behind this patch ---------------------
This is a long standing bug (https://bugs.busybox.net/show_bug.cgi?id=2089)
Others have tried to fix it in past (alteast Peter Korsgaard's patch in 2010),
but somehow failed to be merged (or were backed out afterwards).
http://lists.uclibc.org/pipermail/uclibc/2010-July/044176.html
One of the causes could be side effect of atleast one more bug related to
pthreads and static link which has now been fixed.
http://lists.uclibc.org/pipermail/uclibc/2013-October/047958.html
I have solved this w/o looking at other pacthes but would like to give
credit to Peter and others for confirming that it makes sense.
Cc: Christian Ruppert <christian.ruppert@abilis.com>
CC: Francois Bedard <Francois.Bedard@synopsys.com>
Cc: Joern Rennecke <joern.rennecke@embecosm.com>
Cc: Jeremy Bennett <jeremy.bennett@embecosm.com>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Peter Korsgaard <peter@korsgaard.com>
Cc: Khem Raj <raj.khem@gmail.com>
Cc: buildroot@busybox.net
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
|
|
Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
|
|
If the dynamic linker is built with LDSO_STANDALONE_SUPPORT=y, it can
load then run a dynamically linked program when explicitly invoked
from the command line. This is used for test and prelink purposes,
and also by other tools like PRoot to force the kernel to load the
right ELF interpreter.
This feature is currently broken on x86_64 since the number of command
line arguments (ie. argc) passed from the kernel is an "elf_addr_t"
(64 bit on x86_64), whereas it is read as an "unsigned int" (32 bit on
x86_64).
Ref: https://github.com/cedric-vincent/PRoot/issues/45
Signed-off-by: Cédric VINCENT <cedric.vincent@st.com>
Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
|
|
Adds the mips and arm test ULPs from glibc.
Signed-off-by: Gregory Fong <gregory.0xf0@gmail.com>
Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
|
|
libm-test.c is a generated file needed by the other math tests, but
test rules were trying to build it as a test if trying to compile the
tests a second time.
Signed-off-by: Gregory Fong <gregory.0xf0@gmail.com>
Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
|
|
Using TARGET_ARCH isn't sufficient when ISA can differ.
Signed-off-by: Gregory Fong <gregory.0xf0@gmail.com>
Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
|
|
Guard against duplicate inclusion.
We should go back to just including the linux/sysinfo.h ..
Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
|
|
508b20ead1710e8c295630d096960e51a65b7e5d disentangled
program_invocation_name and __progname but forgot to make __progname
conditional on __UCLIBC_HAS___PROGNAME__, resulting in getconf
attempting to re-define __progname in case __UCLIBC_HAS___PROGNAME__ was
not defined.
Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
|
|
Use toplevel Rules.mak notion of PTINC as list of includes to use for
the testcases.
Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
|
|
This patch fixes the rest of the set-but-not-used warnings in the MIPS
code by using attribute_unused and also fixes some conversion warnings
by changing __arch_compare_and_exchange_xxx_[8|16]_int. Assigning __cmp
(int type) to __prev (pointer type) generates a warning. Assigning zero
to each separately avoids this warning without having to add a cast.
Signed-off-by: Steve Ellcey <sellcey@mips.com>
Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
|
|
This addition allows building uClibc with -mtext-section-literals
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
|
|
Anton reported:
------------------->8---------------------
Package iperf cannot be built in Buildroot due to following error:
/home/akolesov/env/autobuild/tmp/host/usr/bin/arc-buildroot-linux-uclibc-g++
-Wall -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64
-pipe -Os --static -o iperf -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE
-D_FILE_OFFSET_BITS=64 -pipe -Os -pthread -DHAVE_CONFIG_H Client.o
Extractor.o Launch.o List.o Listener.o Locale.o PerfSocket.o ReportCSV.o
ReportDefault.o Reporter.o Server.o Settings.o SocketAddr.o gnu_getopt.o
gnu_getopt_long.o main.o service.o sockets.o stdio.o tcp_window_size.o
../compat/libcompat.a
/home/akolesov/env/autobuild/tmp/host/usr/arc-buildroot-linux-uclibc/sysroot/usr/lib/libc.a(vfork.os):
In function `vfork':
(.text+0x0): multiple definition of `vfork'
/home/akolesov/env/autobuild/tmp/host/usr/arc-buildroot-linux-uclibc/sysroot/usr/lib/libpthread.a(ptfork.os):ptfork.c:(.text+0xc0):
first defined here
collect2: error: ld returned 1 exit status
------------------->8---------------------
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
Cc: Anton Kolesov <Anton.Kolesov@synopsys.com>
Cc: Francois Bedard <Francois.Bedard@synopsys.com>
Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
|
|
Uclibc is not building for MIPS N64 because pread is trying to use the
pread/pwrite system calls instead of pread64/pwrite64. This patch fixes
the problem and was tested with LFS enabled and disabled.
Signed-off-by: Steve Ellcey <sellcey@mips.com>
Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
|
|
When explicitly running the compile target we were missing a dependency
to generate the libm-test.c.
Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
|
|
Testing linker features has to be done against the correct linker.
Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
|
|
There is support for mips64(r1) already in uclibc, this change adds mips64r2
by adding the MIPS64R2 config variable and checking it in Rules.mak.
Signed-off-by: Steve Ellcey <sellcey@mips.com>
Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
|
|
The INLINE_SYSCALL, INTERNAL_SYSCALL*, and internal_syscall* macros
are defined for MIPS in both libc/sysdeps/linux/mips/sysdep.h and
libc/sysdeps/linux/mips/bits/syscalls.h. The macros are the same
in both cases except that syscalls.h defines internal_syscalls[567]
the same for N32 and N64 ABIs and has a different definition for O32.
I believe that is correct. The sysdep.h header uses the O32 versions
for N32 and has different definitions for N64. I think that is wrong
and that N32 and N64 should share the same definition (modulo the
type 'long' vs. 'long long' for the arguments. This setup (from
sysdep.h) now agrees with what glibc has.
I am not positive about which header (sysdep.h vs syscalls.h) is
really the right one to have these definitions in but using sysdep.h
seems to work for all my builds.
Signed-off-by: Steve Ellcey <sellcey@mips.com>
Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
|
|
The special sync_file_range handling is only needed for the O32 ABI
(regardless of whether it is on mips32 or mips64). The N32 (and N64)
ABI's should both use the standard code. This routine was using the
special code for the N32 ABI because that ABI has a word size of 32 bits
and that is wrong. This patch fixes it by checking the ABI used instead
of checking the word size.
Signed-off-by: Steve Ellcey <sellcey@mips.com>
Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
|
|
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
|
|
cderrno is dead code, comment it out.
Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
|
|
When booting a Linux system with qemu-system-mips64 the execution
of $(pwd) in the ash shell triggers a segmentation fault. Ash uses
setjmp/longjmp for exception handling.
After looking at the glibc implementation,
I found some differences, with this patch tries to resolve.
Now the system boots up fine and no segmentation faults occur.
The global pointer should be restored and the types for the
register values should be wide enough.
See:
http://www.cygwin.com/ml/libc-alpha/2003-03/msg00363.html
Signed-off-by: Waldemar Brodkorb <wbx@openadk.org>
Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
|
|
This patch uses 'attribute_unused' to clean up a number of warnings
messages that are generated when doing a MIPS build. All of the
changes are in MIPS specific files and there are no code changes
other then adding the unused attribute where needed.
Signed-off-by: Steve Ellcey <sellcey@mips.com>
Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
|
|
The MIPS build is failing when UCLIBC_HAS_LFS is set to "n"
because posix_fadvise64.c is included in the build when it
should not be.
Signed-off-by: Steve Ellcey <sellcey@mips.com>
Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
|
|
Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
|
|
As reported by Kristof Provost.
Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
|
|
The clone based version was introduced by commit
58570fc8e1fd601f15be5758ab95013d56771804
vfork: Use clone if arch does not have the vfork syscall
but the code was made unreachable by the previous commit
0a043c30ee71245dfe7c9d82d654312c5e1f6127
vfork: make all archs consistent
that adds a guard which require either __NR_vfork or __NR_fork
to be set.
Neither will be set on an arch that would need to use the
clone based version.
The double declaration of vfork was also introduced by
the merge of the two above mentioned patches.
The missing ; was present in the original patch.
CC: Markos Chandras <markos.chandras@imgtec.com>
CC: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
CC: Peter S. Mazinger <ps.m@gmx.net>
Signed-off-by: Stefan Kristiansson <stefan.kristiansson@saunalahti.fi>
Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
|
|
fork() is broken for MIPS64 N64 ABI. You can check it with a simple
C program statically linked with qemu-mips64 user emulation.
Internally fork() is using the clone system call (at least with NPTL)
with 5 arguments. See ./libpthread/nptl/sysdeps/unix/sysv/linux/i386/fork.c.
The calling conventions for MIPS N32 and N64 allow to use up to 8 registers
for that. See http://en.wikipedia.org/wiki/Calling_convention#MIPS
This is correctly implemented in libc/sysdeps/linux/mips/bits/syscalls.h,
but not in libc/sysdeps/linux/mips/sysdep.h. fork.c uses the later one.
It seems that fork() works fine for MIPS64 N32 with just using the stack like
with the O32 case. There is a user of INLINE_SYSCALL with 7 arguments in
libc/sysdeps/linux/common/sync_file_range.c for MIPS64 N32, so I decided to
only use the macros for the MIPS64 N64 case. With this patch my uClibc based
Linux system boots up fine in qemu-system-mips64.
Signed-off-by: Waldemar Brodkorb <wbx@openadk.org>
Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
|
|
We were ending up with an unrecognised CPP token (which is not diagnosed
for assembler-with-cpp, 59805)
Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
|
|
Fixes gen_lowlevelrobustlock on thumb2
Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
|
|
Use the generic runtime pagesize as per
ce54b92b046b65464e2d16b3842f3e97e3e0f27e
Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
|