| Age | Commit message (Collapse) | Author |
|---|
|
This commit adds support for R_ARC_JMP_SLOT relocations during the
bootstrap phase of the dynamic linker. These relocations will be
generated if uClibc-ng is configured with 'DODEBUG=y'.
|
|
|
|
Reviewed-by: Max Filippov <jcmvbkbc@gmail.com>
|
|
To be more consistent separate all TLS macros in separate files and
remove obsolete macros for not supported architectures.
Reviewed-by: Max Filippov <jcmvbkbc@gmail.com>
|
|
As this is only implemented for a few architecture and not well
tested, just remove it.
|
|
|
|
As this is only implemented for a few architecture and not well
tested, just remove it.
Reviewed-by: Max Filippov <jcmvbkbc@gmail.com>
|
|
|
|
Add test case for the deadlock detection.
Reported-By: Martin Willi <martin@strongswan.org>
|
|
|
|
Signed-off-by: Martin Thomas <mtdev@hamtam.de>
|
|
|
|
In uClibc-ng the syscall macros are in bits/syscalls.h.
|
|
|
|
|
|
Add support for Andes Technology NDS32 architecture.
See here http://www.andestech.com/en/index/index.htm for more
informaton. Verification of the port from an older uClibc
port was done on a sponsored AG101p board.
The testsuite only has 5 errors, three are related to
an existing bug in dlclose() with LT.old, also happening
on cris32 and m68k.
Failures to fallocate/posix_fallocate are unresolved.
Thanks to Andes Technology sponsoring the hardware and
being very helpful while doing the uClibc-ng porting.
Signed-off-by: Waldemar Brodkorb <wbx@uclibc-ng.org>
|
|
Commit 251a3c19cb "sleep: employ __USE_EXTERN_INLINES (with necessary fixes)"
introduces following problems:
1. __USE_EXTERN_INLINES forcibly enabled build fails
...
LD libuClibc-1.0.15.so
libc/libc_so.a(cmsg_nxthdr.os): In function `__GI___cmsg_nxthdr':
cmsg_nxthdr.c:(.text.__GI___cmsg_nxthdr+0x0): multiple definition of `__GI___cmsg_nxthdr'
libc/libc_so.a(close.os):close.c:(.text.__GI___cmsg_nxthdr+0x0): first defined here
libc/libc_so.a(creat.os): In function `__GI___cmsg_nxthdr':
creat.c:(.text.__GI___cmsg_nxthdr+0x0): multiple definition of `__GI___cmsg_nxthdr'
libc/libc_so.a(close.os):close.c:(.text.__GI___cmsg_nxthdr+0x0): first defined here
...
2. libuargp wrongly contains __cmsg_nxthdr/__sigismember/__sigdelset/__sigaddset
global symbols on platforms which includes signal.h from sys/procfs.h
As result, static linking will fail:
TEST_LINK argp/ bug-argp1
/home/wbx/ppc-static/target_qemu-ppc-macppc_uclibc-ng_hard/usr/lib/libc.a(sigsetops.os):
In function `__GI___sigismember':
sigsetops.c:(.text+0x0): multiple definition of `__sigismember'
/home/wbx/ppc-static/target_qemu-ppc-macppc_uclibc-ng_hard/usr/lib/libuargp.a(argp-xinl.os):argp-xinl.c:(.text+0x0):
first defined here
/home/wbx/ppc-static/target_qemu-ppc-macppc_uclibc-ng_hard/usr/lib/libc.a(sigsetops.os):
In function `__GI___sigaddset':
sigsetops.c:(.text+0x28): multiple definition of `__sigaddset'
/home/wbx/ppc-static/target_qemu-ppc-macppc_uclibc-ng_hard/usr/lib/libuargp.a(argp-xinl.os):argp-xinl.c:(.text+0x28):
first defined here
/home/wbx/ppc-static/target_qemu-ppc-macppc_uclibc-ng_hard/usr/lib/libc.a(sigsetops.os):
In function `__GI___sigdelset':
sigsetops.c:(.text+0x4c): multiple definition of `__sigdelset'
/home/wbx/ppc-static/target_qemu-ppc-macppc_uclibc-ng_hard/usr/lib/libuargp.a(argp-xinl.os):argp-xinl.c:(.text+0x4c):
first defined here
We have to partially revert 251a3c19cb to fix problems above. It is
safe to do this after commit
162cfaea20 *: inline constant __sig{add,del}set and __sigismember
since we are able to use new inlines from within libc and leave the
rest of world(__USE_EXTERN_INLINES) equal to glibc now.
Signed-off-by: Leonid Lisovskiy <lly.dev@gmail.com>
|
|
When resolving an unqualified host name, the resolver tries the original
name first before appending the domains from the search list. If a TLD
with the same name exists, the query will succeed (but yield no A record)
and the resolver will return HOST_NOT_FOUND without trying the search
domains.
This patch changes the lookup order for unqualified host names (without
dots) to try the search domains first and the original name last.
Signed-off-by: Ingo van Lil <inguin@gmx.de>
|
|
Currently crt1 takes address of functions (main,_init,_fini) directly
which doesn't generate truely position independent code, but zero based
values instead. e.g.
| __start:
| ...
| add_s r2,sp,0x4
| mov_s r0, main
generates to
| 000156ec <__start>:
| ...
| 156f4: add_s r2,sp,0x4
| 156f6: mov_s r0,0x15f7c
| ...
| 00015f7c <main>:
| 15f7c: push_s blink
This works just fine for the normal (non PIE) dynamic executables since
they are loaded at address 0. However this is not true for PIE
executables. So for Scrt1 we use a true position independent way when
taking function addresses.
Cc: uclibc@uclibc.org <uclibc@uclibc.org>
Cc: devel@uclibc-ng.org <devel@uclibc-ng.org>
Cc: Cupertino Miranda <cmiranda@synopsys.com>
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
|
|
Simplify the switch from uClibc to uClibc-ng.
Apps already built against uClibc-0.9.x.y require .so.0
libs to present on target which in case of current uClibc-ng is
not the case and those apps could not be run.
This change creates symlinks from .so.1 to .so.0 for
most of other libs in the same way as it was done by
23e96d89b6ab "ldso: install backward compatibility symlink by default"
Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
Cc: Waldemar Brodkorb <wbx@uclibc-ng.org>
Cc: Vineet Gupta <vgupta@synopsys.com>
Cc: Anton Kolesov <akolesov@synopsys.com>
|
|
"-msoft-float" makes no sense for ARC because there's no such thing
as "-mhard-float" on ARC. Instead we use our own "-mfpu=XXX" option
when a particular floating-point related HW feature is enabled in
the ARC core.
We used to live with that phony option for quite some time but
with migration to newer GCC following warning now appears:
-------------------->8-----------------
arc-linux-gcc: warning: ‘-msoft-float’ is deprecated
cc1: warning: ‘-msoft-float’ is deprecated [enabled by default]
-------------------->8-----------------
And that warning gets printed for each invocation of gcc with
the option in question, which makes compilation output barely
readable.
So we disable that phony option for ARC now.
Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
Cc: Waldemar Brodkorb <wbx@uclibc-ng.org>
Cc: Vineet Gupta <vgupta@synopsys.com>
Cc: Anton Kolesov <akolesov@synopsys.com>
|
|
Linux Standard Base specifies section .note.ABI-tag that can be considered
as a marker for ELF files targeted to Linux systems. See
https://refspecs.linuxfoundation.org/LSB_1.2.0/gLSB/noteabitag.html
This section, for example, is used by the GDB to identify Linux ELFs as
compared to baremetal ELFs that do not have this section.
Signed-off-by: Anton Kolesov <Anton.Kolesov@synopsys.com>
Cc: Vineet Gupta <Vineet.Gupta1@synopsys.com>
|
|
It can happen under certain cases that the DSO had refcount 0,
but was already loaded. (NODELETE flag is set, or it is pulled
in via both NEEDED dependency and explicit dlopen()).
Add extra reference count for NODELETE objects, this will
ensure that the reference count never drops below one.
It is improved version of
http://lists.busybox.net/pipermail/uclibc/2013-June/047826.html
Signed-off-by: Leonid Lisovskiy <lly.dev@gmail.com>
|
|
Previously, DL_OPENED flag was set in libdl only and never used.
Set it centralized in _dl_load_elf_shared_library() & use it in
both ld.so and libdl.
Additionally, rename it to DL_OPENED2 for clarity.
Signed-off-by: Leonid Lisovskiy <lly.dev@gmail.com>
|
|
This patch is to address a proposal by Waldemar in this thread:
http://mailman.uclibc-ng.org/pipermail/devel/2016-June/001006.html
tst-ethers-line and tst-ethers require /etc/ethers to exist,
otherwise user should create it manually.
Add this info to warning message.
Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
|
|
When trying to resolve a hostname by getaddrinfo() using some specific
settings, it will always return -EAI_NONAME (Name or service not known).
To reproduce this behavior, you need to request an IPv6 address with the
additional AF_V4MAPPED flag set from an non IPv6 capable hostname. If
you choose a IPv4/IPv6 capable hostname like google.com, everything
works fine.
This patch is more or less a port [1][2] from the glibc and their behavior
for the AF_V4MAPPED flag. To test the bug you can use the following snippet.
---- 8< ----
int ret;
struct addrinfo* result;
struct addrinfo hints;
memset(&hints, 0, sizeof(struct addrinfo));
hints.ai_family = AF_INET6;
hints.ai_flags = AI_V4MAPPED;
ret = getaddrinfo("test.com", NULL, &hints, &result);
printf("getaddrinfo(): %i", ret);
---- 8< ----
[1] https://sourceware.org/git/?p=glibc.git;a=commit;f=sysdeps/posix/getaddrinfo.c;h=925c3c5c71596c02f7e58a0ffcdcaae44eb065c1
[2] https://sourceware.org/git/?p=glibc.git;a=commit;f=sysdeps/posix/getaddrinfo.c;h=28977c2c1acb789660ad47e0d88e42486059c916
Signed-off-by: Alexander Wenzel <alexander.wenzel@qsc.de>
|
|
The 'BLT' instruction checks for *signed* values. So if a3, length
parameter of memset, is negative, then value added to the PC will be
large.
memset(buf, 0xaa, 0xffff0000) triggers the bug.
GDB session without the patch:
"""
$ gdb ./main-buggy-memset.elf -q
Reading symbols from ./main-buggy-memset.elf...done.
(gdb) x/i memset
0x8770 <memset>: mov r3, r0
(gdb) r
Starting program: /root/memset/main-buggy-memset.elf
Program received signal SIGSEGV, Segmentation fault.
0x00048808 in ?? ()
"""
The $pc is outside of the memset function because:
"""
(gdb) x/i $pc
=> 0x87e4 <memset+116>: add pc, pc, r2, lsl #2
(gdb) info reg $r2
r2 0x10007 65543
"""
GDB session with the bug fixed (patch applied):
"""
$ gdb ./main-fixed-memset.elf -q
Reading symbols from ./main-fixed-memset.elf...done.
(gdb) x/i memset
0x8770 <memset>: mov r3, r0
(gdb) r
Starting program: /root/memset/main-fixed-memset.elf
Program received signal SIGSEGV, Segmentation fault.
memset () at libc/string/arm/memset.S:92
92 libc/string/arm/memset.S: No such file or directory.
(gdb) x/i $pc
=> 0x87b0 <memset+64>: stmia r3!, {r1, r12}
(gdb) info reg $r3
r3 0x15000 86016
(gdb) info proc mappings
process 5822
Mapped address spaces:
Start Addr End Addr Size Offset objfile
0x8000 0xb000 0x3000 0x0
/root/memset/main-fixed-memset.elf
0x12000 0x15000 0x3000 0x2000
/root/memset/main-fixed-memset.elf
0xb6fff000 0xb7000000 0x1000 0x0 [sigpage]
0xbefdf000 0xbf000000 0x21000 0x0
0xffff0000 0xffff1000 0x1000 0x0 [vectors]
(gdb) info reg $sp
sp 0x14d78 0x14d78
"""
GDB crashes inside the memset function, on the store instruction. This
time the crash is (as expected) because of a memory access imediately
after the memory region that contains the stack -- the buffer that's
being memset'd is allocated on the stack.
Signed-off-by: Lucian Cojocar <lucian.cojocar@vu.nl>
|
|
Select required features. Fix intendation.
Reported-by: Leonid Lisovskiy <lly.dev@gmail.com>
|
|
|
|
|
|
Testregex returned 0 even when some sub-tests
inside the testregex failed. Now it returns error
count.
Signed-off-by: Vlad Zakharov <vzakhar@synopsys.com>
|
|
mmap offset must be a multiple of the page size. It was hardcoded
to 4K, so mmap2 test failed on non-4K page size architectures.
Now we get page size using sysconf(_SC_PAGE_SIZE).
Build and run tests done on nsim arc hs38.
Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
|
|
Do it by following the trail of the existing commented code, which
implemented it by calling get_phys_pages() and get_avphys_pages().
This patch implements these two functions, which are also glibc
extensions.
Some program/libraries (e.g. libuv) assumes that sysconf(_SC_PHYS_PAGES)
works on linux and never check for -1, thus they report an insane amount
of memory.
Signed-off-by: Nicolas Cavallari <nicolas.cavallari@green-communications.fr>
|
|
|
|
|
|
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
|
|
When a 'hard' error occurs, fwrite reports that all data was written or
buffered even if that is not the case. It should report how much data
was actually written and buffered.
Signed-off-by: Jan Vangorp <jan.vangorp_ext@softathome.com>
|
|
The man page for fopencookie prescribes that custom write functions
should return 0 on error (and should definitely not return a negative
value) [1].
However, the uClibc implementation expects a negative return value in
case of an error (libc/stdio/_WRITE.c). If the write function returns 0
on error, we drop into an infinite loop if the error persists.
This patch wraps the user supplied write function such that a 0 return
value is converted to -1. errno is first set to EAGAIN such that if the
custom write function does not set errno in case of error, this is
treated as a "soft" error.
Custom write functions that cater towards uClibc and _do_ return a
negative value are not affected.
If no custom write function is supplied, set errno to EINVAL such that
this condition is treated as a "hard" error. Previously the behaviour
depended on whether the last error before the write happened to be a "hard"
or a "soft" error.
[1] http://git.kernel.org/cgit/docs/man-pages/man-pages.git/tree/man3/fopencookie.3?id=6c0d0ef0c7a9c4bcf805c6f9e9bc1ef1c3865ea0#n164
Signed-off-by: Jan Vangorp <jan.vangorp_ext@softathome.com>
|
|
Simplify and use generic lowlevellock.
Tested-by: Waldemar Brodkorb <wbx@uclibc-ng.org>
Signed-off-by: Leonid Lisovskiy <lly.dev@gmail.com>
|
|
Simplify and use generic lowlevellock.
Tested-by: Waldemar Brodkorb <wbx@uclibc-ng.org>
Signed-off-by: Leonid Lisovskiy <lly.dev@gmail.com>
|
|
Simplify and use generic lowlevellock.
Tested-by: Waldemar Brodkorb <wbx@uclibc-ng.org>
Signed-off-by: Leonid Lisovskiy <lly.dev@gmail.com>
|
|
Rename mmap2 test as this is a ARM specific test, only
execute on ARM systems. Add more new tests from glibc.
|
|
Nobody should use gcc 3.3 nowadays.
|
|
These files are not used, no regression found while
running the testsuite.
|
|
Fix some gcc warnings while compiling the testsuite.
|
|
See here:
https://sourceware.org/git/gitweb.cgi?p=glibc.git;a=commit;h=900056024b75eae8b550d7fee1dec9e71f28344e
Fixes testsuite runs on newer kernels.
|
|
Remove ppc64 bits and bytes, as we don't support ppc64 and
it makes the code more readable without the dead code.
|
|
|
|
lowlevellock.c for arm differs from the generic lowlevellock.c only in
insignificant ways, so can be removed. Follow glibc commit 6d96f5e4c0
Solves __lll_timedlock_wait busy-wait issues described at
http://sourceware.org/bugzilla/show_bug.cgi?id=15119
Signed-off-by: Leonid Lisovskiy <lly.dev@gmail.com>
|
|
unlocked NORMAL mutex.
Althought, it is undefined behavior, there is no reason for segfault.
Program received signal SIGSEGV, Segmentation fault.
__pthread_unlock (lock=lock@entry=0x804b03c <lock+16>)
at libpthread/linuxthreads.old/spinlock.c:231
231 (&lock->__status, oldstatus, (long)(thr->p_nextlock) & ~1L))
It occurs only on platforms which has HAS_COMPARE_AND_SWAP defined.
Restore glibc commit fbaf6e72d6 "spinlock.c (__pthread_unlock): Don't crash if
called for an untaken mutex." behavior, broken later by commit 4ad1d0cfbf.
Signed-off-by: Leonid Lisovskiy <lly.dev@gmail.com>
|
