Age | Commit message (Collapse) | Author |
|
Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
|
|
Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
|
|
This builds and installs the crt files.
Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
|
|
Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
|
|
Patch attached:
Fix a bug in offset calculations when parsing /etc/hosts in resolv.c.
Formerly a miscalculation meant that having found the correct line, the code
was trashing its own result data.
Signed-off-by: Philip Nye <philipn@engarts.com>
Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
|
|
I dont see a dependency between shared library and v7.
The difference between v7 and v8 is that in v8 you have
the added math asm-insns: smul/umul/udiv/sdiv/urem.
It shouldnt affect shared libraries creation.
Signed-off-by: Konrad Eisele <konrad@gaisler.com>
Signed-off-by: Austin Foxley <austinf@cetoncorp.com>
|
|
Sparc-Gcc generates q_xxx intrinsic calls for quad float ("long double")
code. The routines from glibc's glibc-2.9/sysdeps/sparc/sparc32/soft-fp/*
where taken and ported to uclibc.
Signed-off-by: Konrad Eisele <konrad@gaisler.com>
Signed-off-by: Austin Foxley <austinf@cetoncorp.com>
|
|
The SSP_ALL_CFLAGS in nptl arch CFLAGS leaks out and forces things
like dl-support.c, brk.c, sbrk.c memcpy, etc to be built with
-fstack-protector-all. This is bad when linking statically since
initializing TLS will call those functions before SSP is initialized.
The libpthread itself will still be built with -fstack-protector-all
due to CFLAGS-nptl has SSP_ALL_CFLAGS in libpthread/nptl/Makefile.in
Thanks to Timo Teras for helping with this.
Signed-off-by: Natanael Copa <natanael.copa@gmail.com>
Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
|
|
Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
|
|
Fix Microblaze config and makefiles.
Signed-off-by: Steven J. Magnani <steve@digidescorp.com>
Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
|
|
Header files needed to build linuxthreads.old for microblaze.
Signed-off-by: Steven J. Magnani <steve@digidescorp.com>
Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
|
|
Port optimized memcpy/memmove from the kernel.
Signed-off-by: Steven J. Magnani <steve@digidescorp.com>
Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
|
|
Other header files for uClibc compilation.
Signed-off-by: Steven J. Magnani <steve@digidescorp.com>
Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
|
|
Sync kernel header definitions with those used in recent mainline kernels.
Signed-off-by: Steven J. Magnani <steve@digidescorp.com>
Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
|
|
Software floating point for microblaze.
Signed-off-by: Steven J. Magnani <steve@digidescorp.com>
Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
|
|
Fix the microblaze vfork() and clone() implementations.
Add support for clone2().
Signed-off-by: Steven J. Magnani <steve@digidescorp.com>
Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
|
|
Fix the microblaze syscall interface.
Recent mainline kernels no longer carry userland code to invoke syscalls
and microblaze can use the uClibc generic code.
Signed-off-by: Steven J. Magnani <steve@digidescorp.com>
Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
|
|
Rework crt bootstrap to work with the new __uClibc_main(),
and hardwire crt init/fini code since the awk approach to generating it on
the fly doesn't work for microblaze. The output from the gcc 4.1.2 compiler
is scrambled so that the tags expected by the awk script to bracket the
init/fini entry and exit code no longer do.
Signed-off-by: Steven J. Magnani <steve@digidescorp.com>
Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
|
|
Some state and registers are missing from setjmp/longjmp handling.
Signed-off-by: Steven J. Magnani <steve@digidescorp.com>
Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
|
|
The warning was repeated for every .c file which is including
this header:
./ldso/include/dl-hash.h: In function '_dl_find_hash':
./ldso/include/dl-hash.h:150: warning: unused parameter 'tpntp'
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
|
|
Tested: ran testsuite
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
|
|
It is deemed too unsafe. Quoting Timo:
If I'm building with "-fPIC -pg" it instruments all C functions with
profiler stuff which is called via PLT and causes EBX reloads
--> crash
-fno-omit-frame-pointer is sometimes useful for profiling too
--> crash
Also the upcoming -fsplit-stack will be broken by this too (that might
need additional uclibc support though).
And I'm pretty sure there's also other similar compiler features.
There's no predefined #defines in gcc for any of these.
What I'm trying to say that there are *numerous* situations when the
compiler can create stack frame for you without you ever knowing it. And
if you want to do a tail jump, you really should be doing it from .S
file where you control fully the prologue/epilogue code. (GCC naked
attribute does not seem to work on x86.)
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
|
|
Thanks, Timo!
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
|
|
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
|
|
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
|
|
break it
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
|
|
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
|
|
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
|
|
These two failures are fixed:
Failure: Test: ilogb (0.0) == FP_ILOGB0 plus exceptions allowed
Failure: Test: ilogb (NaN) == FP_ILOGBNAN plus exceptions allowed
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
|
|
These failures no longer happen:
Failure: Test: scalb (2.0, 0.5) == NaN plus invalid exception
Failure: Test: scalb (3.0, -2.5) == NaN plus invalid exception
Failure: Test: rint (0.5) == 0.0
Failure: Test: rint (1.5) == 2.0
Failure: Test: rint (2.5) == 2.0
Failure: Test: rint (3.5) == 4.0
Failure: Test: rint (4.5) == 4.0
Failure: Test: rint (-0.5) == -0.0
Failure: Test: rint (-1.5) == -2.0
Failure: Test: rint (-2.5) == -2.0
Failure: Test: rint (-3.5) == -4.0
Failure: Test: rint (-4.5) == -4.0
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
|
|
Fixed failures:
Failure: Test: pow (1, NaN) == 1
Failure: Test: pow (1, inf) == 1
Failure: Test: pow (-1, inf) == 1
Failure: Test: pow (1, -inf) == 1
Failure: Test: pow (-1, -inf) == 1
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
|
|
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
|
|
This error is gone:
Failure: Test: modf (NaN, &x) == NaN
Result:
is: -0.00000000000000000000e+00 -0
should be: nan nan
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
|
|
test/math was not running at all, presume it has bit rotted:
It was trying to run libm-test.c as if it is a binary.
It was looking for libm-test-ulps (file with allowed
errors in lower bits) in arch-specific dirs which do not exist
in uclibc, as a result wrong file (libm-test.inc) was used instead.
Test failure was not showing the error result, user had to
fish it out from some .out files.
I added libm-test-ulps-ARCH files from recent glibc,
this filtered out a lot of false positives.
For example, cosf(M_PI_6l * 4.0) ideally should be -0.5,
we are getting -0.50000005047356477217, and this isn't
a failure (the difference is one lowest bit of mantissa).
"make check UCLIBC_ONLY=1 VERBOSE=1" still fails,
but not as catastrophically as before.
For the record, the failure occurs on the stage where we check
32-bit float functions, these tests fail:
Failure: Test: modf (NaN, &x) == NaN
Failure: Test: ilogb (NaN) == FP_ILOGBNAN plus exceptions allowed
Failure: Test: scalb (2.0, 0.5) == NaN plus invalid exception
Failure: Test: scalb (3.0, -2.5) == NaN plus invalid exception
Failure: Test: scalb (0, NaN) == NaN
Failure: Test: scalb (1, NaN) == NaN
Failure: Test: scalb (0, inf) == NaN plus invalid exception
Failure: Test: scalb (-0, inf) == NaN plus invalid exception
Failure: Test: scalb (1, inf) == inf
Failure: Test: scalb (-1, inf) == -inf
Failure: Test: scalb (inf, -inf) == NaN plus invalid exception
Failure: Test: scalb (-inf, -inf) == NaN plus invalid exception
Failure: Test: scalb (1, NaN) == NaN
Failure: Test: scalb (0, NaN) == NaN
Failure: Test: scalb (inf, NaN) == NaN
Failure: Test: pow (1, NaN) == 1
Failure: Test: pow (1, inf) == 1
Failure: Test: pow (-1, inf) == 1
Failure: Test: pow (1, -inf) == 1
Failure: Test: pow (-1, -inf) == 1
Failure: Test: rint (0.5) == 0.0
Failure: Test: rint (1.5) == 2.0
Failure: Test: rint (2.5) == 2.0
Failure: Test: rint (3.5) == 4.0
Failure: Test: rint (4.5) == 4.0
Failure: Test: rint (-0.5) == -0.0
Failure: Test: rint (-1.5) == -2.0
Failure: Test: rint (-2.5) == -2.0
Failure: Test: rint (-3.5) == -4.0
Failure: Test: rint (-4.5) == -4.0
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
|
|
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
|
|
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
|
|
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
|
|
An architecture that _may_ have a MMU (and thus implements
the msync syscall), but for which the kernel and uClibc are built as
noMMU, we have a stub for msync.
Thanks to Steven J. Magnani for noticing.
Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
|
|
If there was an error during syscall then after it's completion a3
register holds a non-zero value and v0 holds an actual error code which
should be saved in errno. This can be achieved by calling
__syscall_error with the value from v0 as a parameter. So this value
should be stored in a0, but the appropriate assembly instructions are
missing. Fixed this now by adding "move a0, v0".
I think it was once fixed by 58c5f8ba4cdf62342d05a546d15404cbbb3c4e07
but then something went wrong. Again...
Signed-off-by: Alexander Gordeev <lasaine@lvk.cs.msu.su>
Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
|
|
text data bss dec hex filename
- 318 4 0 322 142 libc/pwd_grp/lckpwdf.o
+ 312 4 0 316 13c libc/pwd_grp/lckpwdf.o
- 166 0 1 167 a7 libc/stdlib/abort.o
+ 157 0 1 158 9e libc/stdlib/abort.o
- 42 0 0 42 2a libc/sysdeps/linux/common/pause.o
+ 27 0 0 27 1b libc/sysdeps/linux/common/pause.o
Signed-off-by: Denys Vlasenko <dvlasenk@redhat.com>
|
|
Signed-off-by: Denys Vlasenko <dvlasenk@redhat.com>
|
|
...or rather, it WILL BE code shrink when gcc become clever enough
to not emit a second, useless XORing of ebx:
31 db xor %ebx,%ebx
85 c0 test %eax,%eax
74 11 je 73 <__GI_sleep+0x73>
31 db xor %ebx,%ebx <=== ?!
Signed-off-by: Denys Vlasenko <dvlasenk@redhat.com>
|
|
__USE_EXTERN_INLINES was unused and had bit-rotted, had to fix it
when it didn't work as intended at first.
text data bss dec hex filename
- 168 0 0 168 a8 libc/unistd/sleep.o
+ 146 0 0 146 92 libc/unistd/sleep.o
Signed-off-by: Denys Vlasenko <dvlasenk@redhat.com>
|
|
text data bss dec hex filename
- 197 0 0 197 c5 libc/unistd/sleep.o
+ 168 0 0 168 a8 libc/unistd/sleep.o
Signed-off-by: Denys Vlasenko <dvlasenk@redhat.com>
|
|
GCC can emit prologue/epilogue code for the functions in various
different cases:
- frame pointers
- PIC build (to load ebx for indirect calls/jumps)
- forced stack smashing protection
If we used jump in such cases, we'd corrupt the call stack and
crash.
Signed-off-by: Timo Teräs <timo.teras@iki.fi>
Signed-off-by: Denys Vlasenko <dvlasenk@redhat.com>
|
|
It can be easily reconstructed, since it's obvious
Signed-off-by: Denys Vlasenko <dvlasenk@redhat.com>
|
|
Use less stack by using same "sigset_t set" object for new and saved
signal set, remove redundant clearing of set, and do not save/restore
errno around sigprocmask(SIG_SETMASK) - it never changes it.
While at it, improve comments and make code style consistent
across sleep.c file.
text data bss dec hex filename
- 242 0 0 242 f2 libc/unistd/sleep.o
+ 197 0 0 197 c5 libc/unistd/sleep.o
Signed-off-by: Denys Vlasenko <dvlasenk@redhat.com>
|
|
No code changes according to objdump.
Signed-off-by: Denys Vlasenko <dvlasenk@redhat.com>
|
|
objdump confirms that I did not mess it up.
Signed-off-by: Denys Vlasenko <dvlasenk@redhat.com>
|
|
Example:
--ppfs->maxposarg;
Verified with objdump that no code is changed
Signed-off-by: Denys Vlasenko <dvlasenk@redhat.com>
|