diff options
Diffstat (limited to 'libpthread/linuxthreads/linuxthreads.texi')
| -rw-r--r-- | libpthread/linuxthreads/linuxthreads.texi | 1428 |
1 files changed, 1428 insertions, 0 deletions
diff --git a/libpthread/linuxthreads/linuxthreads.texi b/libpthread/linuxthreads/linuxthreads.texi new file mode 100644 index 000000000..7a98103b3 --- /dev/null +++ b/libpthread/linuxthreads/linuxthreads.texi @@ -0,0 +1,1428 @@ +@node POSIX Threads +@c @node POSIX Threads, , Top, Top +@chapter POSIX Threads +@c %MENU% The standard threads library + +@c This chapter needs more work bigtime. -zw + +This chapter describes the pthreads (POSIX threads) library. This +library provides support functions for multithreaded programs: thread +primitives, synchronization objects, and so forth. It also implements +POSIX 1003.1b semaphores (not to be confused with System V semaphores). + +The threads operations (@samp{pthread_*}) do not use @var{errno}. +Instead they return an error code directly. The semaphore operations do +use @var{errno}. + +@menu +* Basic Thread Operations:: Creating, terminating, and waiting for threads. +* Thread Attributes:: Tuning thread scheduling. +* Cancellation:: Stopping a thread before it's done. +* Cleanup Handlers:: Deallocating resources when a thread is + cancelled. +* Mutexes:: One way to synchronize threads. +* Condition Variables:: Another way. +* POSIX Semaphores:: And a third way. +* Thread-Specific Data:: Variables with different values in + different threads. +* Threads and Signal Handling:: Why you should avoid mixing the two, and + how to do it if you must. +* Miscellaneous Thread Functions:: A grab bag of utility routines. +@end menu + +@node Basic Thread Operations +@section Basic Thread Operations + +These functions are the thread equivalents of @code{fork}, @code{exit}, +and @code{wait}. + +@comment pthread.h +@comment POSIX +@deftypefun int pthread_create (pthread_t * @var{thread}, pthread_attr_t * @var{attr}, void * (*@var{start_routine})(void *), void * @var{arg}) +@code{pthread_create} creates a new thread of control that executes +concurrently with the calling thread. The new thread calls the +function @var{start_routine}, passing it @var{arg} as first argument. The +new thread terminates either explicitly, by calling @code{pthread_exit}, +or implicitly, by returning from the @var{start_routine} function. The +latter case is equivalent to calling @code{pthread_exit} with the result +returned by @var{start_routine} as exit code. + +The @var{attr} argument specifies thread attributes to be applied to the +new thread. @xref{Thread Attributes}, for details. The @var{attr} +argument can also be @code{NULL}, in which case default attributes are +used: the created thread is joinable (not detached) and has an ordinary +(not realtime) scheduling policy. + +On success, the identifier of the newly created thread is stored in the +location pointed by the @var{thread} argument, and a 0 is returned. On +error, a non-zero error code is returned. + +This function may return the following errors: +@table @code +@item EAGAIN +Not enough system resources to create a process for the new thread, +or more than @code{PTHREAD_THREADS_MAX} threads are already active. +@end table +@end deftypefun + +@comment pthread.h +@comment POSIX +@deftypefun void pthread_exit (void *@var{retval}) +@code{pthread_exit} terminates the execution of the calling thread. All +cleanup handlers (@pxref{Cleanup Handlers}) that have been set for the +calling thread with @code{pthread_cleanup_push} are executed in reverse +order (the most recently pushed handler is executed first). Finalization +functions for thread-specific data are then called for all keys that +have non-@code{NULL} values associated with them in the calling thread +(@pxref{Thread-Specific Data}). Finally, execution of the calling +thread is stopped. + +The @var{retval} argument is the return value of the thread. It can be +retrieved from another thread using @code{pthread_join}. + +The @code{pthread_exit} function never returns. +@end deftypefun + +@comment pthread.h +@comment POSIX +@deftypefun int pthread_cancel (pthread_t @var{thread}) + +@code{pthread_cancel} sends a cancellation request to the thread denoted +by the @var{thread} argument. If there is no such thread, +@code{pthread_cancel} fails and returns @code{ESRCH}. Otherwise it +returns 0. @xref{Cancellation}, for details. +@end deftypefun + +@comment pthread.h +@comment POSIX +@deftypefun int pthread_join (pthread_t @var{th}, void **thread_@var{return}) +@code{pthread_join} suspends the execution of the calling thread until +the thread identified by @var{th} terminates, either by calling +@code{pthread_exit} or by being cancelled. + +If @var{thread_return} is not @code{NULL}, the return value of @var{th} +is stored in the location pointed to by @var{thread_return}. The return +value of @var{th} is either the argument it gave to @code{pthread_exit}, +or @code{PTHREAD_CANCELED} if @var{th} was cancelled. + +The joined thread @code{th} must be in the joinable state: it must not +have been detached using @code{pthread_detach} or the +@code{PTHREAD_CREATE_DETACHED} attribute to @code{pthread_create}. + +When a joinable thread terminates, its memory resources (thread +descriptor and stack) are not deallocated until another thread performs +@code{pthread_join} on it. Therefore, @code{pthread_join} must be called +once for each joinable thread created to avoid memory leaks. + +At most one thread can wait for the termination of a given +thread. Calling @code{pthread_join} on a thread @var{th} on which +another thread is already waiting for termination returns an error. + +@code{pthread_join} is a cancellation point. If a thread is canceled +while suspended in @code{pthread_join}, the thread execution resumes +immediately and the cancellation is executed without waiting for the +@var{th} thread to terminate. If cancellation occurs during +@code{pthread_join}, the @var{th} thread remains not joined. + +On success, the return value of @var{th} is stored in the location +pointed to by @var{thread_return}, and 0 is returned. On error, one of +the following values is returned: +@table @code +@item ESRCH +No thread could be found corresponding to that specified by @var{th}. +@item EINVAL +The @var{th} thread has been detached, or another thread is already +waiting on termination of @var{th}. +@item EDEADLK +The @var{th} argument refers to the calling thread. +@end table +@end deftypefun + +@node Thread Attributes +@section Thread Attributes + +@comment pthread.h +@comment POSIX + +Threads have a number of attributes that may be set at creation time. +This is done by filling a thread attribute object @var{attr} of type +@code{pthread_attr_t}, then passing it as second argument to +@code{pthread_create}. Passing @code{NULL} is equivalent to passing a +thread attribute object with all attributes set to their default values. + +Attribute objects are consulted only when creating a new thread. The +same attribute object can be used for creating several threads. +Modifying an attribute object after a call to @code{pthread_create} does +not change the attributes of the thread previously created. + +@comment pthread.h +@comment POSIX +@deftypefun int pthread_attr_init (pthread_attr_t *@var{attr}) +@code{pthread_attr_init} initializes the thread attribute object +@var{attr} and fills it with default values for the attributes. (The +default values are listed below for each attribute.) + +Each attribute @var{attrname} (see below for a list of all attributes) +can be individually set using the function +@code{pthread_attr_set@var{attrname}} and retrieved using the function +@code{pthread_attr_get@var{attrname}}. +@end deftypefun + +@comment pthread.h +@comment POSIX +@deftypefun int pthread_attr_destroy (pthread_attr_t *@var{attr}) +@code{pthread_attr_destroy} destroys the attribute object pointed to by +@var{attr} releasing any resources associated with it. @var{attr} is +left in an undefined state, and you must not use it again in a call to +any pthreads function until it has been reinitialized. +@end deftypefun + +@findex pthread_attr_setinheritsched +@findex pthread_attr_setschedparam +@findex pthread_attr_setschedpolicy +@findex pthread_attr_setscope +@comment pthread.h +@comment POSIX +@deftypefun int pthread_attr_set@var{attr} (pthread_attr_t *@var{obj}, int @var{value}) +Set attribute @var{attr} to @var{value} in the attribute object pointed +to by @var{obj}. See below for a list of possible attributes and the +values they can take. + +On success, these functions return 0. If @var{value} is not meaningful +for the @var{attr} being modified, they will return the error code +@code{EINVAL}. Some of the functions have other failure modes; see +below. +@end deftypefun + +@findex pthread_attr_getinheritsched +@findex pthread_attr_getschedparam +@findex pthread_attr_getschedpolicy +@findex pthread_attr_getscope +@comment pthread.h +@comment POSIX +@deftypefun int pthread_attr_get@var{attr} (const pthread_attr_t *@var{obj}, int *@var{value}) +Store the current setting of @var{attr} in @var{obj} into the variable +pointed to by @var{value}. + +These functions always return 0. +@end deftypefun + +The following thread attributes are supported: +@table @samp +@item detachstate +Choose whether the thread is created in the joinable state (value +@code{PTHREAD_CREATE_JOINABLE}) or in the detached state +(@code{PTHREAD_CREATE_DETACHED}). The default is +@code{PTHREAD_CREATE_JOINABLE}. + +In the joinable state, another thread can synchronize on the thread +termination and recover its termination code using @code{pthread_join}, +but some of the thread resources are kept allocated after the thread +terminates, and reclaimed only when another thread performs +@code{pthread_join} on that thread. + +In the detached state, the thread resources are immediately freed when +it terminates, but @code{pthread_join} cannot be used to synchronize on +the thread termination. + +A thread created in the joinable state can later be put in the detached +thread using @code{pthread_detach}. + +@item schedpolicy +Select the scheduling policy for the thread: one of @code{SCHED_OTHER} +(regular, non-realtime scheduling), @code{SCHED_RR} (realtime, +round-robin) or @code{SCHED_FIFO} (realtime, first-in first-out). +The default is @code{SCHED_OTHER}. +@c Not doc'd in our manual: FIXME. +@c See @code{sched_setpolicy} for more information on scheduling policies. + +The realtime scheduling policies @code{SCHED_RR} and @code{SCHED_FIFO} +are available only to processes with superuser privileges. +@code{pthread_attr_setschedparam} will fail and return @code{ENOTSUP} if +you try to set a realtime policy when you are unprivileged. + +The scheduling policy of a thread can be changed after creation with +@code{pthread_setschedparam}. + +@item schedparam +Change the scheduling parameter (the scheduling priority) +for the thread. The default is 0. + +This attribute is not significant if the scheduling policy is +@code{SCHED_OTHER}; it only matters for the realtime policies +@code{SCHED_RR} and @code{SCHED_FIFO}. + +The scheduling priority of a thread can be changed after creation with +@code{pthread_setschedparam}. + +@item inheritsched +Choose whether the scheduling policy and scheduling parameter for the +newly created thread are determined by the values of the +@var{schedpolicy} and @var{schedparam} attributes (value +@code{PTHREAD_EXPLICIT_SCHED}) or are inherited from the parent thread +(value @code{PTHREAD_INHERIT_SCHED}). The default is +@code{PTHREAD_EXPLICIT_SCHED}. + +@item scope +Choose the scheduling contention scope for the created thread. The +default is @code{PTHREAD_SCOPE_SYSTEM}, meaning that the threads contend +for CPU time with all processes running on the machine. In particular, +thread priorities are interpreted relative to the priorities of all +other processes on the machine. The other possibility, +@code{PTHREAD_SCOPE_PROCESS}, means that scheduling contention occurs +only between the threads of the running process: thread priorities are +interpreted relative to the priorities of the other threads of the +process, regardless of the priorities of other processes. + +@code{PTHREAD_SCOPE_PROCESS} is not supported in LinuxThreads. If you +try to set the scope to this value @code{pthread_attr_setscope} will +fail and return @code{ENOTSUP}. +@end table + +@node Cancellation +@section Cancellation + +Cancellation is the mechanism by which a thread can terminate the +execution of another thread. More precisely, a thread can send a +cancellation request to another thread. Depending on its settings, the +target thread can then either ignore the request, honor it immediately, +or defer it till it reaches a cancellation point. When threads are +first created by @code{pthread_create}, they always defer cancellation +requests. + +When a thread eventually honors a cancellation request, it behaves as if +@code{pthread_exit(PTHREAD_CANCELED)} was called. All cleanup handlers +are executed in reverse order, finalization functions for +thread-specific data are called, and finally the thread stops executing. +If the cancelled thread was joinable, the return value +@code{PTHREAD_CANCELED} is provided to whichever thread calls +@var{pthread_join} on it. See @code{pthread_exit} for more information. + +Cancellation points are the points where the thread checks for pending +cancellation requests and performs them. The POSIX threads functions +@code{pthread_join}, @code{pthread_cond_wait}, +@code{pthread_cond_timedwait}, @code{pthread_testcancel}, +@code{sem_wait}, and @code{sigwait} are cancellation points. In +addition, these system calls are cancellation points: + +@multitable @columnfractions .33 .33 .33 +@item @t{accept} @tab @t{open} @tab @t{sendmsg} +@item @t{close} @tab @t{pause} @tab @t{sendto} +@item @t{connect} @tab @t{read} @tab @t{system} +@item @t{fcntl} @tab @t{recv} @tab @t{tcdrain} +@item @t{fsync} @tab @t{recvfrom} @tab @t{wait} +@item @t{lseek} @tab @t{recvmsg} @tab @t{waitpid} +@item @t{msync} @tab @t{send} @tab @t{write} +@item @t{nanosleep} +@end multitable + +@noindent +All library functions that call these functions (such as +@code{printf}) are also cancellation points. + +@comment pthread.h +@comment POSIX +@deftypefun int pthread_setcancelstate (int @var{state}, int *@var{oldstate}) +@code{pthread_setcancelstate} changes the cancellation state for the +calling thread -- that is, whether cancellation requests are ignored or +not. The @var{state} argument is the new cancellation state: either +@code{PTHREAD_CANCEL_ENABLE} to enable cancellation, or +@code{PTHREAD_CANCEL_DISABLE} to disable cancellation (cancellation +requests are ignored). + +If @var{oldstate} is not @code{NULL}, the previous cancellation state is +stored in the location pointed to by @var{oldstate}, and can thus be +restored later by another call to @code{pthread_setcancelstate}. + +If the @var{state} argument is not @code{PTHREAD_CANCEL_ENABLE} or +@code{PTHREAD_CANCEL_DISABLE}, @code{pthread_setcancelstate} fails and +returns @code{EINVAL}. Otherwise it returns 0. +@end deftypefun + +@comment pthread.h +@comment POSIX +@deftypefun int pthread_setcanceltype (int @var{type}, int *@var{oldtype}) +@code{pthread_setcanceltype} changes the type of responses to +cancellation requests for the calling thread: asynchronous (immediate) +or deferred. The @var{type} argument is the new cancellation type: +either @code{PTHREAD_CANCEL_ASYNCHRONOUS} to cancel the calling thread +as soon as the cancellation request is received, or +@code{PTHREAD_CANCEL_DEFERRED} to keep the cancellation request pending +until the next cancellation point. If @var{oldtype} is not @code{NULL}, +the previous cancellation state is stored in the location pointed to by +@var{oldtype}, and can thus be restored later by another call to +@code{pthread_setcanceltype}. + +If the @var{type} argument is not @code{PTHREAD_CANCEL_DEFERRED} or +@code{PTHREAD_CANCEL_ASYNCHRONOUS}, @code{pthread_setcanceltype} fails +and returns @code{EINVAL}. Otherwise it returns 0. +@end deftypefun + +@comment pthread.h +@comment POSIX +@deftypefun void pthread_testcancel (@var{void}) +@code{pthread_testcancel} does nothing except testing for pending +cancellation and executing it. Its purpose is to introduce explicit +checks for cancellation in long sequences of code that do not call +cancellation point functions otherwise. +@end deftypefun + +@node Cleanup Handlers +@section Cleanup Handlers + +Cleanup handlers are functions that get called when a thread terminates, +either by calling @code{pthread_exit} or because of +cancellation. Cleanup handlers are installed and removed following a +stack-like discipline. + +The purpose of cleanup handlers is to free the resources that a thread +may hold at the time it terminates. In particular, if a thread exits or +is cancelled while it owns a locked mutex, the mutex will remain locked +forever and prevent other threads from executing normally. The best way +to avoid this is, just before locking the mutex, to install a cleanup +handler whose effect is to unlock the mutex. Cleanup handlers can be +used similarly to free blocks allocated with @code{malloc} or close file +descriptors on thread termination. + +Here is how to lock a mutex @var{mut} in such a way that it will be +unlocked if the thread is canceled while @var{mut} is locked: + +@smallexample +pthread_cleanup_push(pthread_mutex_unlock, (void *) &mut); +pthread_mutex_lock(&mut); +/* do some work */ +pthread_mutex_unlock(&mut); +pthread_cleanup_pop(0); +@end smallexample + +Equivalently, the last two lines can be replaced by + +@smallexample +pthread_cleanup_pop(1); +@end smallexample + +Notice that the code above is safe only in deferred cancellation mode +(see @code{pthread_setcanceltype}). In asynchronous cancellation mode, a +cancellation can occur between @code{pthread_cleanup_push} and +@code{pthread_mutex_lock}, or between @code{pthread_mutex_unlock} and +@code{pthread_cleanup_pop}, resulting in both cases in the thread trying +to unlock a mutex not locked by the current thread. This is the main +reason why asynchronous cancellation is difficult to use. + +If the code above must also work in asynchronous cancellation mode, +then it must switch to deferred mode for locking and unlocking the +mutex: + +@smallexample +pthread_setcanceltype(PTHREAD_CANCEL_DEFERRED, &oldtype); +pthread_cleanup_push(pthread_mutex_unlock, (void *) &mut); +pthread_mutex_lock(&mut); +/* do some work */ +pthread_cleanup_pop(1); +pthread_setcanceltype(oldtype, NULL); +@end smallexample + +The code above can be rewritten in a more compact and efficient way, +using the non-portable functions @code{pthread_cleanup_push_defer_np} +and @code{pthread_cleanup_pop_restore_np}: + +@smallexample +pthread_cleanup_push_defer_np(pthread_mutex_unlock, (void *) &mut); +pthread_mutex_lock(&mut); +/* do some work */ +pthread_cleanup_pop_restore_np(1); +@end smallexample + +@comment pthread.h +@comment POSIX +@deftypefun void pthread_cleanup_push (void (*@var{routine}) (void *), void *@var{arg}) + +@code{pthread_cleanup_push} installs the @var{routine} function with +argument @var{arg} as a cleanup handler. From this point on to the +matching @code{pthread_cleanup_pop}, the function @var{routine} will be +called with arguments @var{arg} when the thread terminates, either +through @code{pthread_exit} or by cancellation. If several cleanup +handlers are active at that point, they are called in LIFO order: the +most recently installed handler is called first. +@end deftypefun + +@comment pthread.h +@comment POSIX +@deftypefun void pthread_cleanup_pop (int @var{execute}) +@code{pthread_cleanup_pop} removes the most recently installed cleanup +handler. If the @var{execute} argument is not 0, it also executes the +handler, by calling the @var{routine} function with arguments +@var{arg}. If the @var{execute} argument is 0, the handler is only +removed but not executed. +@end deftypefun + +Matching pairs of @code{pthread_cleanup_push} and +@code{pthread_cleanup_pop} must occur in the same function, at the same +level of block nesting. Actually, @code{pthread_cleanup_push} and +@code{pthread_cleanup_pop} are macros, and the expansion of +@code{pthread_cleanup_push} introduces an open brace @code{@{} with the +matching closing brace @code{@}} being introduced by the expansion of the +matching @code{pthread_cleanup_pop}. + +@comment pthread.h +@comment GNU +@deftypefun void pthread_cleanup_push_defer_np (void (*@var{routine}) (void *), void *@var{arg}) +@code{pthread_cleanup_push_defer_np} is a non-portable extension that +combines @code{pthread_cleanup_push} and @code{pthread_setcanceltype}. +It pushes a cleanup handler just as @code{pthread_cleanup_push} does, +but also saves the current cancellation type and sets it to deferred +cancellation. This ensures that the cleanup mechanism is effective even +if the thread was initially in asynchronous cancellation mode. +@end deftypefun + +@comment pthread.h +@comment GNU +@deftypefun void pthread_cleanup_pop_restore_np (int @var{execute}) +@code{pthread_cleanup_pop_restore_np} pops a cleanup handler introduced +by @code{pthread_cleanup_push_defer_np}, and restores the cancellation +type to its value at the time @code{pthread_cleanup_push_defer_np} was +called. +@end deftypefun + +@code{pthread_cleanup_push_defer_np} and +@code{pthread_cleanup_pop_restore_np} must occur in matching pairs, at +the same level of block nesting. + +The sequence + +@smallexample +pthread_cleanup_push_defer_np(routine, arg); +... +pthread_cleanup_pop_defer_np(execute); +@end smallexample + +@noindent +is functionally equivalent to (but more compact and efficient than) + +@smallexample +@{ + int oldtype; + pthread_setcanceltype(PTHREAD_CANCEL_DEFERRED, &oldtype); + pthread_cleanup_push(routine, arg); + ... + pthread_cleanup_pop(execute); + pthread_setcanceltype(oldtype, NULL); +@} +@end smallexample + + +@node Mutexes +@section Mutexes + +A mutex is a MUTual EXclusion device, and is useful for protecting +shared data structures from concurrent modifications, and implementing +critical sections and monitors. + +A mutex has two possible states: unlocked (not owned by any thread), +and locked (owned by one thread). A mutex can never be owned by two +different threads simultaneously. A thread attempting to lock a mutex +that is already locked by another thread is suspended until the owning +thread unlocks the mutex first. + +None of the mutex functions is a cancellation point, not even +@code{pthread_mutex_lock}, in spite of the fact that it can suspend a +thread for arbitrary durations. This way, the status of mutexes at +cancellation points is predictable, allowing cancellation handlers to +unlock precisely those mutexes that need to be unlocked before the +thread stops executing. Consequently, threads using deferred +cancellation should never hold a mutex for extended periods of time. + +It is not safe to call mutex functions from a signal handler. In +particular, calling @code{pthread_mutex_lock} or +@code{pthread_mutex_unlock} from a signal handler may deadlock the +calling thread. + +@comment pthread.h +@comment POSIX +@deftypefun int pthread_mutex_init (pthread_mutex_t *@var{mutex}, const pthread_mutexattr_t *@var{mutexattr}) + +@code{pthread_mutex_init} initializes the mutex object pointed to by +@var{mutex} according to the mutex attributes specified in @var{mutexattr}. +If @var{mutexattr} is @code{NULL}, default attributes are used instead. + +The LinuxThreads implementation supports only one mutex attribute, +the @var{mutex kind}, which is either ``fast'', ``recursive'', or +``error checking''. The kind of a mutex determines whether +it can be locked again by a thread that already owns it. +The default kind is ``fast''. + +Variables of type @code{pthread_mutex_t} can also be initialized +statically, using the constants @code{PTHREAD_MUTEX_INITIALIZER} (for +fast mutexes), @code{PTHREAD_RECURSIVE_MUTEX_INITIALIZER_NP} (for +recursive mutexes), and @code{PTHREAD_ERRORCHECK_MUTEX_INITIALIZER_NP} +(for error checking mutexes). + +@code{pthread_mutex_init} always returns 0. +@end deftypefun + +@comment pthread.h +@comment POSIX +@deftypefun int pthread_mutex_lock (pthread_mutex_t *mutex)) +@code{pthread_mutex_lock} locks the given mutex. If the mutex is +currently unlocked, it becomes locked and owned by the calling thread, +and @code{pthread_mutex_lock} returns immediately. If the mutex is +already locked by another thread, @code{pthread_mutex_lock} suspends the +calling thread until the mutex is unlocked. + +If the mutex is already locked by the calling thread, the behavior of +@code{pthread_mutex_lock} depends on the kind of the mutex. If the mutex +is of the ``fast'' kind, the calling thread is suspended. It will +remain suspended forever, because no other thread can unlock the mutex. +If the mutex is of the ``error checking'' kind, @code{pthread_mutex_lock} +returns immediately with the error code @code{EDEADLK}. If the mutex is +of the ``recursive'' kind, @code{pthread_mutex_lock} succeeds and +returns immediately, recording the number of times the calling thread +has locked the mutex. An equal number of @code{pthread_mutex_unlock} +operations must be performed before the mutex returns to the unlocked +state. +@end deftypefun + +@comment pthread.h +@comment POSIX +@deftypefun int pthread_mutex_trylock (pthread_mutex_t *@var{mutex}) +@code{pthread_mutex_trylock} behaves identically to +@code{pthread_mutex_lock}, except that it does not block the calling +thread if the mutex is already locked by another thread (or by the +calling thread in the case of a ``fast'' mutex). Instead, +@code{pthread_mutex_trylock} returns immediately with the error code +@code{EBUSY}. +@end deftypefun + +@comment pthread.h +@comment POSIX +@deftypefun int pthread_mutex_unlock (pthread_mutex_t *@var{mutex}) +@code{pthread_mutex_unlock} unlocks the given mutex. The mutex is +assumed to be locked and owned by the calling thread on entrance to +@code{pthread_mutex_unlock}. If the mutex is of the ``fast'' kind, +@code{pthread_mutex_unlock} always returns it to the unlocked state. If +it is of the ``recursive'' kind, it decrements the locking count of the +mutex (number of @code{pthread_mutex_lock} operations performed on it by +the calling thread), and only when this count reaches zero is the mutex +actually unlocked. + +On ``error checking'' mutexes, @code{pthread_mutex_unlock} actually +checks at run-time that the mutex is locked on entrance, and that it was +locked by the same thread that is now calling +@code{pthread_mutex_unlock}. If these conditions are not met, +@code{pthread_mutex_unlock} returns @code{EPERM}, and the mutex remains +unchanged. ``Fast'' and ``recursive'' mutexes perform no such checks, +thus allowing a locked mutex to be unlocked by a thread other than its +owner. This is non-portable behavior and must not be relied upon. +@end deftypefun + +@comment pthread.h +@comment POSIX +@deftypefun int pthread_mutex_destroy (pthread_mutex_t *@var{mutex}) +@code{pthread_mutex_destroy} destroys a mutex object, freeing the +resources it might hold. The mutex must be unlocked on entrance. In the +LinuxThreads implementation, no resources are associated with mutex +objects, thus @code{pthread_mutex_destroy} actually does nothing except +checking that the mutex is unlocked. + +If the mutex is locked by some thread, @code{pthread_mutex_destroy} +returns @code{EBUSY}. Otherwise it returns 0. +@end deftypefun + +If any of the above functions (except @code{pthread_mutex_init}) +is applied to an uninitialized mutex, they will simply return +@code{EINVAL} and do nothing. + +A shared global variable @var{x} can be protected by a mutex as follows: + +@smallexample +int x; +pthread_mutex_t mut = PTHREAD_MUTEX_INITIALIZER; +@end smallexample + +All accesses and modifications to @var{x} should be bracketed by calls to +@code{pthread_mutex_lock} and @code{pthread_mutex_unlock} as follows: + +@smallexample +pthread_mutex_lock(&mut); +/* operate on x */ +pthread_mutex_unlock(&mut); +@end smallexample + +Mutex attributes can be specified at mutex creation time, by passing a +mutex attribute object as second argument to @code{pthread_mutex_init}. +Passing @code{NULL} is equivalent to passing a mutex attribute object +with all attributes set to their default values. + +@comment pthread.h +@comment POSIX +@deftypefun int pthread_mutexattr_init (pthread_mutexattr_t *@var{attr}) +@code{pthread_mutexattr_init} initializes the mutex attribute object +@var{attr} and fills it with default values for the attributes. + +This function always returns 0. +@end deftypefun + +@comment pthread.h +@comment POSIX +@deftypefun int pthread_mutexattr_destroy (pthread_mutexattr_t *@var{attr}) +@code{pthread_mutexattr_destroy} destroys a mutex attribute object, +which must not be reused until it is +reinitialized. @code{pthread_mutexattr_destroy} does nothing in the +LinuxThreads implementation. + +This function always returns 0. +@end deftypefun + +LinuxThreads supports only one mutex attribute: the mutex kind, which is +either @code{PTHREAD_MUTEX_FAST_NP} for ``fast'' mutexes, +@code{PTHREAD_MUTEX_RECURSIVE_NP} for ``recursive'' mutexes, or +@code{PTHREAD_MUTEX_ERRORCHECK_NP} for ``error checking'' mutexes. As +the @code{NP} suffix indicates, this is a non-portable extension to the +POSIX standard and should not be employed in portable programs. + +The mutex kind determines what happens if a thread attempts to lock a +mutex it already owns with @code{pthread_mutex_lock}. If the mutex is of +the ``fast'' kind, @code{pthread_mutex_lock} simply suspends the calling +thread forever. If the mutex is of the ``error checking'' kind, +@code{pthread_mutex_lock} returns immediately with the error code +@code{EDEADLK}. If the mutex is of the ``recursive'' kind, the call to +@code{pthread_mutex_lock} returns immediately with a success return +code. The number of times the thread owning the mutex has locked it is +recorded in the mutex. The owning thread must call +@code{pthread_mutex_unlock} the same number of times before the mutex +returns to the unlocked state. + +The default mutex kind is ``fast'', that is, @code{PTHREAD_MUTEX_FAST_NP}. + +@comment pthread.h +@comment GNU +@deftypefun int pthread_mutexattr_setkind_np (pthread_mutexattr_t *@var{attr}, int @var{kind}) +@code{pthread_mutexattr_setkind_np} sets the mutex kind attribute in +@var{attr} to the value specified by @var{kind}. + +If @var{kind} is not @code{PTHREAD_MUTEX_FAST_NP}, +@code{PTHREAD_MUTEX_RECURSIVE_NP}, or +@code{PTHREAD_MUTEX_ERRORCHECK_NP}, this function will return +@code{EINVAL} and leave @var{attr} unchanged. +@end deftypefun + +@comment pthread.h +@comment GNU +@deftypefun int pthread_mutexattr_getkind_np (const pthread_mutexattr_t *@var{attr}, int *@var{kind}) +@code{pthread_mutexattr_getkind_np} retrieves the current value of the +mutex kind attribute in @var{attr} and stores it in the location pointed +to by @var{kind}. + +This function always returns 0. +@end deftypefun + +@node Condition Variables +@section Condition Variables + +A condition (short for ``condition variable'') is a synchronization +device that allows threads to suspend execution until some predicate on +shared data is satisfied. The basic operations on conditions are: signal +the condition (when the predicate becomes true), and wait for the +condition, suspending the thread execution until another thread signals +the condition. + +A condition variable must always be associated with a mutex, to avoid +the race condition where a thread prepares to wait on a condition +variable and another thread signals the condition just before the first +thread actually waits on it. + +@comment pthread.h +@comment POSIX +@deftypefun int pthread_cond_init (pthread_cond_t *@var{cond}, pthread_condattr_t *cond_@var{attr}) + +@code{pthread_cond_init} initializes the condition variable @var{cond}, +using the condition attributes specified in @var{cond_attr}, or default +attributes if @var{cond_attr} is @code{NULL}. The LinuxThreads +implementation supports no attributes for conditions, hence the +@var{cond_attr} parameter is actually ignored. + +Variables of type @code{pthread_cond_t} can also be initialized +statically, using the constant @code{PTHREAD_COND_INITIALIZER}. + +This function always returns 0. +@end deftypefun + +@comment pthread.h +@comment POSIX +@deftypefun int pthread_cond_signal (pthread_cond_t *@var{cond}) +@code{pthread_cond_signal} restarts one of the threads that are waiting +on the condition variable @var{cond}. If no threads are waiting on +@var{cond}, nothing happens. If several threads are waiting on +@var{cond}, exactly one is restarted, but it is not specified which. + +This function always returns 0. +@end deftypefun + +@comment pthread.h +@comment POSIX +@deftypefun int pthread_cond_broadcast (pthread_cond_t *@var{cond}) +@code{pthread_cond_broadcast} restarts all the threads that are waiting +on the condition variable @var{cond}. Nothing happens if no threads are +waiting on @var{cond}. + +This function always returns 0. +@end deftypefun + +@comment pthread.h +@comment POSIX +@deftypefun int pthread_cond_wait (pthread_cond_t *@var{cond}, pthread_mutex_t *@var{mutex}) +@code{pthread_cond_wait} atomically unlocks the @var{mutex} (as per +@code{pthread_unlock_mutex}) and waits for the condition variable +@var{cond} to be signaled. The thread execution is suspended and does +not consume any CPU time until the condition variable is signaled. The +@var{mutex} must be locked by the calling thread on entrance to +@code{pthread_cond_wait}. Before returning to the calling thread, +@code{pthread_cond_wait} re-acquires @var{mutex} (as per +@code{pthread_lock_mutex}). + +Unlocking the mutex and suspending on the condition variable is done +atomically. Thus, if all threads always acquire the mutex before +signaling the condition, this guarantees that the condition cannot be +signaled (and thus ignored) between the time a thread locks the mutex +and the time it waits on the condition variable. + +This function always returns 0. +@end deftypefun + +@comment pthread.h +@comment POSIX +@deftypefun int pthread_cond_timedwait (pthread_cond_t *@var{cond}, pthread_mutex_t *@var{mutex}, const struct timespec *@var{abstime}) +@code{pthread_cond_timedwait} atomically unlocks @var{mutex} and waits +on @var{cond}, as @code{pthread_cond_wait} does, but it also bounds the +duration of the wait. If @var{cond} has not been signaled before time +@var{abstime}, the mutex @var{mutex} is re-acquired and +@code{pthread_cond_timedwait} returns the error code @code{ETIMEDOUT}. +The wait can also be interrupted by a signal; in that case +@code{pthread_cond_timedwait} returns @code{EINTR}. + +The @var{abstime} parameter specifies an absolute time, with the same +origin as @code{time} and @code{gettimeofday}: an @var{abstime} of 0 +corresponds to 00:00:00 GMT, January 1, 1970. +@end deftypefun + +@comment pthread.h +@comment POSIX +@deftypefun int pthread_cond_destroy (pthread_cond_t *@var{cond}) +@code{pthread_cond_destroy} destroys the condition variable @var{cond}, +freeing the resources it might hold. If any threads are waiting on the +condition variable, @code{pthread_cond_destroy} leaves @var{cond} +untouched and returns @code{EBUSY}. Otherwise it returns 0, and +@var{cond} must not be used again until it is reinitialized. + +In the LinuxThreads implementation, no resources are associated with +condition variables, so @code{pthread_cond_destroy} actually does +nothing. +@end deftypefun + +@code{pthread_cond_wait} and @code{pthread_cond_timedwait} are +cancellation points. If a thread is cancelled while suspended in one of +these functions, the thread immediately resumes execution, relocks the +mutex specified by @var{mutex}, and finally executes the cancellation. +Consequently, cleanup handlers are assured that @var{mutex} is locked +when they are called. + +It is not safe to call the condition variable functions from a signal +handler. In particular, calling @code{pthread_cond_signal} or +@code{pthread_cond_broadcast} from a signal handler may deadlock the +calling thread. + +Consider two shared variables @var{x} and @var{y}, protected by the +mutex @var{mut}, and a condition variable @var{cond} that is to be +signaled whenever @var{x} becomes greater than @var{y}. + +@smallexample +int x,y; +pthread_mutex_t mut = PTHREAD_MUTEX_INITIALIZER; +pthread_cond_t cond = PTHREAD_COND_INITIALIZER; +@end smallexample + +Waiting until @var{x} is greater than @var{y} is performed as follows: + +@smallexample +pthread_mutex_lock(&mut); +while (x <= y) @{ + pthread_cond_wait(&cond, &mut); +@} +/* operate on x and y */ +pthread_mutex_unlock(&mut); +@end smallexample + +Modifications on @var{x} and @var{y} that may cause @var{x} to become greater than +@var{y} should signal the condition if needed: + +@smallexample +pthread_mutex_lock(&mut); +/* modify x and y */ +if (x > y) pthread_cond_broadcast(&cond); +pthread_mutex_unlock(&mut); +@end smallexample + +If it can be proved that at most one waiting thread needs to be waken +up (for instance, if there are only two threads communicating through +@var{x} and @var{y}), @code{pthread_cond_signal} can be used as a slightly more +efficient alternative to @code{pthread_cond_broadcast}. In doubt, use +@code{pthread_cond_broadcast}. + +To wait for @var{x} to becomes greater than @var{y} with a timeout of 5 +seconds, do: + +@smallexample +struct timeval now; +struct timespec timeout; +int retcode; + +pthread_mutex_lock(&mut); +gettimeofday(&now); +timeout.tv_sec = now.tv_sec + 5; +timeout.tv_nsec = now.tv_usec * 1000; +retcode = 0; +while (x <= y && retcode != ETIMEDOUT) @{ + retcode = pthread_cond_timedwait(&cond, &mut, &timeout); +@} +if (retcode == ETIMEDOUT) @{ + /* timeout occurred */ +@} else @{ + /* operate on x and y */ +@} +pthread_mutex_unlock(&mut); +@end smallexample + +Condition attributes can be specified at condition creation time, by +passing a condition attribute object as second argument to +@code{pthread_cond_init}. Passing @code{NULL} is equivalent to passing +a condition attribute object with all attributes set to their default +values. + +The LinuxThreads implementation supports no attributes for +conditions. The functions on condition attributes are included only for +compliance with the POSIX standard. + +@comment pthread.h +@comment POSIX +@deftypefun int pthread_condattr_init (pthread_condattr_t *@var{attr}) +@deftypefunx int pthread_condattr_destroy (pthread_condattr_t *@var{attr}) +@code{pthread_condattr_init} initializes the condition attribute object +@var{attr} and fills it with default values for the attributes. +@code{pthread_condattr_destroy} destroys the condition attribute object +@var{attr}. + +Both functions do nothing in the LinuxThreads implementation. + +@code{pthread_condattr_init} and @code{pthread_condattr_destroy} always +return 0. +@end deftypefun + +@node POSIX Semaphores +@section POSIX Semaphores + +@vindex SEM_VALUE_MAX +Semaphores are counters for resources shared between threads. The +basic operations on semaphores are: increment the counter atomically, +and wait until the counter is non-null and decrement it atomically. + +Semaphores have a maximum value past which they cannot be incremented. +The macro @code{SEM_VALUE_MAX} is defined to be this maximum value. In +the GNU C library, @code{SEM_VALUE_MAX} is equal to @code{INT_MAX} +(@pxref{Range of Type}), but it may be much smaller on other systems. + +The pthreads library implements POSIX 1003.1b semaphores. These should +not be confused with System V semaphores (@code{ipc}, @code{semctl} and +@code{semop}). +@c !!! SysV IPC is not doc'd at all in our manual + +All the semaphore functions and macros are defined in @file{semaphore.h}. + +@comment semaphore.h +@comment POSIX +@deftypefun int sem_init (sem_t *@var{sem}, int @var{pshared}, unsigned int @var{value}) +@code{sem_init} initializes the semaphore object pointed to by +@var{sem}. The count associated with the semaphore is set initially to +@var{value}. The @var{pshared} argument indicates whether the semaphore +is local to the current process (@var{pshared} is zero) or is to be +shared between several processes (@var{pshared} is not zero). + +On success @code{sem_init} returns 0. On failure it returns -1 and sets +@var{errno} to one of the following values: + +@table @code +@item EINVAL +@var{value} exceeds the maximal counter value @code{SEM_VALUE_MAX} + +@item ENOSYS +@var{pshared} is not zero. LinuxThreads currently does not support +process-shared semaphores. (This will eventually change.) +@end table +@end deftypefun + +@comment semaphore.h +@comment POSIX +@deftypefun int sem_destroy (sem_t * @var{sem}) +@code{sem_destroy} destroys a semaphore object, freeing the resources it +might hold. If any threads are waiting on the semaphore when +@code{sem_destroy} is called, it fails and sets @var{errno} to +@code{EBUSY}. + +In the LinuxThreads implementation, no resources are associated with +semaphore objects, thus @code{sem_destroy} actually does nothing except +checking that no thread is waiting on the semaphore. This will change +when process-shared semaphores are implemented. +@end deftypefun + +@comment semaphore.h +@comment POSIX +@deftypefun int sem_wait (sem_t * @var{sem}) +@code{sem_wait} suspends the calling thread until the semaphore pointed +to by @var{sem} has non-zero count. It then atomically decreases the +semaphore count. + +@code{sem_wait} is a cancellation point. It always returns 0. +@end deftypefun + +@comment semaphore.h +@comment POSIX +@deftypefun int sem_trywait (sem_t * @var{sem}) +@code{sem_trywait} is a non-blocking variant of @code{sem_wait}. If the +semaphore pointed to by @var{sem} has non-zero count, the count is +atomically decreased and @code{sem_trywait} immediately returns 0. If +the semaphore count is zero, @code{sem_trywait} immediately returns -1 +and sets errno to @code{EAGAIN}. +@end deftypefun + +@comment semaphore.h +@comment POSIX +@deftypefun int sem_post (sem_t * @var{sem}) +@code{sem_post} atomically increases the count of the semaphore pointed to +by @var{sem}. This function never blocks. + +@c !!! This para appears not to agree with the code. +On processors supporting atomic compare-and-swap (Intel 486, Pentium and +later, Alpha, PowerPC, MIPS II, Motorola 68k, Ultrasparc), the +@code{sem_post} function is can safely be called from signal handlers. +This is the only thread synchronization function provided by POSIX +threads that is async-signal safe. On the Intel 386 and earlier Sparc +chips, the current LinuxThreads implementation of @code{sem_post} is not +async-signal safe, because the hardware does not support the required +atomic operations. + +@code{sem_post} always succeeds and returns 0, unless the semaphore +count would exceed @code{SEM_VALUE_MAX} after being incremented. In +that case @code{sem_post} returns -1 and sets @var{errno} to +@code{EINVAL}. The semaphore count is left unchanged. +@end deftypefun + +@comment semaphore.h +@comment POSIX +@deftypefun int sem_getvalue (sem_t * @var{sem}, int * @var{sval}) +@code{sem_getvalue} stores in the location pointed to by @var{sval} the +current count of the semaphore @var{sem}. It always returns 0. +@end deftypefun + +@node Thread-Specific Data +@section Thread-Specific Data + +Programs often need global or static variables that have different +values in different threads. Since threads share one memory space, this +cannot be achieved with regular variables. Thread-specific data is the +POSIX threads answer to this need. + +Each thread possesses a private memory block, the thread-specific data +area, or TSD area for short. This area is indexed by TSD keys. The TSD +area associates values of type @code{void *} to TSD keys. TSD keys are +common to all threads, but the value associated with a given TSD key can +be different in each thread. + +For concreteness, the TSD areas can be viewed as arrays of @code{void *} +pointers, TSD keys as integer indices into these arrays, and the value +of a TSD key as the value of the corresponding array element in the +calling thread. + +When a thread is created, its TSD area initially associates @code{NULL} +with all keys. + +@comment pthread.h +@comment POSIX +@deftypefun int pthread_key_create (pthread_key_t *@var{key}, void (*destr_function) (void *)) +@code{pthread_key_create} allocates a new TSD key. The key is stored in +the location pointed to by @var{key}. There is a limit of +@code{PTHREAD_KEYS_MAX} on the number of keys allocated at a given +time. The value initially associated with the returned key is +@code{NULL} in all currently executing threads. + +The @var{destr_function} argument, if not @code{NULL}, specifies a +destructor function associated with the key. When a thread terminates +via @code{pthread_exit} or by cancellation, @var{destr_function} is +called on the value associated with the key in that thread. The +@var{destr_function} is not called if a key is deleted with +@code{pthread_key_delete} or a value is changed with +@code{pthread_setspecific}. The order in which destructor functions are +called at thread termination time is unspecified. + +Before the destructor function is called, the @code{NULL} value is +associated with the key in the current thread. A destructor function +might, however, re-associate non-@code{NULL} values to that key or some +other key. To deal with this, if after all the destructors have been +called for all non-@code{NULL} values, there are still some +non-@code{NULL} values with associated destructors, then the process is +repeated. The LinuxThreads implementation stops the process after +@code{PTHREAD_DESTRUCTOR_ITERATIONS} iterations, even if some +non-@code{NULL} values with associated descriptors remain. Other +implementations may loop indefinitely. + +@code{pthread_key_create} returns 0 unless @code{PTHREAD_KEYS_MAX} keys +have already been allocated, in which case it fails and returns +@code{EAGAIN}. +@end deftypefun + + +@comment pthread.h +@comment POSIX +@deftypefun int pthread_key_delete (pthread_key_t @var{key}) +@code{pthread_key_delete} deallocates a TSD key. It does not check +whether non-@code{NULL} values are associated with that key in the +currently executing threads, nor call the destructor function associated +with the key. + +If there is no such key @var{key}, it returns @code{EINVAL}. Otherwise +it returns 0. +@end deftypefun + +@comment pthread.h +@comment POSIX +@deftypefun int pthread_setspecific (pthread_key_t @var{key}, const void *@var{pointer}) +@code{pthread_setspecific} changes the value associated with @var{key} +in the calling thread, storing the given @var{pointer} instead. + +If there is no such key @var{key}, it returns @code{EINVAL}. Otherwise +it returns 0. +@end deftypefun + +@comment pthread.h +@comment POSIX +@deftypefun {void *} pthread_getspecific (pthread_key_t @var{key}) +@code{pthread_getspecific} returns the value currently associated with +@var{key} in the calling thread. + +If there is no such key @var{key}, it returns @code{NULL}. +@end deftypefun + +The following code fragment allocates a thread-specific array of 100 +characters, with automatic reclaimation at thread exit: + +@smallexample +/* Key for the thread-specific buffer */ +static pthread_key_t buffer_key; + +/* Once-only initialisation of the key */ +static pthread_once_t buffer_key_once = PTHREAD_ONCE_INIT; + +/* Allocate the thread-specific buffer */ +void buffer_alloc(void) +@{ + pthread_once(&buffer_key_once, buffer_key_alloc); + pthread_setspecific(buffer_key, malloc(100)); +@} + +/* Return the thread-specific buffer */ +char * get_buffer(void) +@{ + return (char *) pthread_getspecific(buffer_key); +@} + +/* Allocate the key */ +static void buffer_key_alloc() +@{ + pthread_key_create(&buffer_key, buffer_destroy); +@} + +/* Free the thread-specific buffer */ +static void buffer_destroy(void * buf) +@{ + free(buf); +@} +@end smallexample + +@node Threads and Signal Handling +@section Threads and Signal Handling + +@comment pthread.h +@comment POSIX +@deftypefun int pthread_sigmask (int @var{how}, const sigset_t *@var{newmask}, sigset_t *@var{oldmask}) +@code{pthread_sigmask} changes the signal mask for the calling thread as +described by the @var{how} and @var{newmask} arguments. If @var{oldmask} +is not @code{NULL}, the previous signal mask is stored in the location +pointed to by @var{oldmask}. + +The meaning of the @var{how} and @var{newmask} arguments is the same as +for @code{sigprocmask}. If @var{how} is @code{SIG_SETMASK}, the signal +mask is set to @var{newmask}. If @var{how} is @code{SIG_BLOCK}, the +signals specified to @var{newmask} are added to the current signal mask. +If @var{how} is @code{SIG_UNBLOCK}, the signals specified to +@var{newmask} are removed from the current signal mask. + +Recall that signal masks are set on a per-thread basis, but signal +actions and signal handlers, as set with @code{sigaction}, are shared +between all threads. + +The @code{pthread_sigmask} function returns 0 on success, and one of the +following error codes on error: +@table @code +@item EINVAL +@var{how} is not one of @code{SIG_SETMASK}, @code{SIG_BLOCK}, or @code{SIG_UNBLOCK} + +@item EFAULT +@var{newmask} or @var{oldmask} point to invalid addresses +@end table +@end deftypefun + +@comment pthread.h +@comment POSIX +@deftypefun int pthread_kill (pthread_t @var{thread}, int @var{signo}) +@code{pthread_kill} sends signal number @var{signo} to the thread +@var{thread}. The signal is delivered and handled as described in +@ref{Signal Handling}. + +@code{pthread_kill} returns 0 on success, one of the following error codes +on error: +@table @code +@item EINVAL +@var{signo} is not a valid signal number + +@item ESRCH +The thread @var{thread} does not exist (e.g. it has already terminated) +@end table +@end deftypefun + +@comment pthread.h +@comment POSIX +@deftypefun int sigwait (const sigset_t *@var{set}, int *@var{sig}) +@code{sigwait} suspends the calling thread until one of the signals in +@var{set} is delivered to the calling thread. It then stores the number +of the signal received in the location pointed to by @var{sig} and +returns. The signals in @var{set} must be blocked and not ignored on +entrance to @code{sigwait}. If the delivered signal has a signal handler +function attached, that function is @emph{not} called. + +@code{sigwait} is a cancellation point. It always returns 0. +@end deftypefun + +For @code{sigwait} to work reliably, the signals being waited for must be +blocked in all threads, not only in the calling thread, since +otherwise the POSIX semantics for signal delivery do not guarantee +that it's the thread doing the @code{sigwait} that will receive the signal. +The best way to achieve this is block those signals before any threads +are created, and never unblock them in the program other than by +calling @code{sigwait}. + +Signal handling in LinuxThreads departs significantly from the POSIX +standard. According to the standard, ``asynchronous'' (external) signals +are addressed to the whole process (the collection of all threads), +which then delivers them to one particular thread. The thread that +actually receives the signal is any thread that does not currently block +the signal. + +In LinuxThreads, each thread is actually a kernel process with its own +PID, so external signals are always directed to one particular thread. +If, for instance, another thread is blocked in @code{sigwait} on that +signal, it will not be restarted. + +The LinuxThreads implementation of @code{sigwait} installs dummy signal +handlers for the signals in @var{set} for the duration of the +wait. Since signal handlers are shared between all threads, other +threads must not attach their own signal handlers to these signals, or +alternatively they should all block these signals (which is recommended +anyway). + +@node Miscellaneous Thread Functions +@section Miscellaneous Thread Functions + +@comment pthread.h +@comment POSIX +@deftypefun {pthread_t} pthread_self (@var{void}) +@code{pthread_self} returns the thread identifier for the calling thread. +@end deftypefun + +@comment pthread.h +@comment POSIX +@deftypefun int pthread_equal (pthread_t thread1, pthread_t thread2) +@code{pthread_equal} determines if two thread identifiers refer to the same +thread. + +A non-zero value is returned if @var{thread1} and @var{thread2} refer to +the same thread. Otherwise, 0 is returned. +@end deftypefun + +@comment pthread.h +@comment POSIX +@deftypefun int pthread_detach (pthread_t @var{th}) +@code{pthread_detach} puts the thread @var{th} in the detached +state. This guarantees that the memory resources consumed by @var{th} +will be freed immediately when @var{th} terminates. However, this +prevents other threads from synchronizing on the termination of @var{th} +using @code{pthread_join}. + +A thread can be created initially in the detached state, using the +@code{detachstate} attribute to @code{pthread_create}. In contrast, +@code{pthread_detach} applies to threads created in the joinable state, +and which need to be put in the detached state later. + +After @code{pthread_detach} completes, subsequent attempts to perform +@code{pthread_join} on @var{th} will fail. If another thread is already +joining the thread @var{th} at the time @code{pthread_detach} is called, +@code{pthread_detach} does nothing and leaves @var{th} in the joinable +state. + +On success, 0 is returned. On error, one of the following codes is +returned: +@table @code +@item ESRCH +No thread could be found corresponding to that specified by @var{th} +@item EINVAL +The thread @var{th} is already in the detached state +@end table +@end deftypefun + +@comment pthread.h +@comment POSIX +@deftypefun int pthread_atfork (void (*@var{prepare})(void), void (*@var{parent})(void), void (*@var{child})(void)) + +@code{pthread_atfork} registers handler functions to be called just +before and just after a new process is created with @code{fork}. The +@var{prepare} handler will be called from the parent process, just +before the new process is created. The @var{parent} handler will be +called from the parent process, just before @code{fork} returns. The +@var{child} handler will be called from the child process, just before +@code{fork} returns. + +@code{pthread_atfork} returns 0 on success and a non-zero error code on +error. + +One or more of the three handlers @var{prepare}, @var{parent} and +@var{child} can be given as @code{NULL}, meaning that no handler needs +to be called at the corresponding point. + +@code{pthread_atfork} can be called several times to install several +sets of handlers. At @code{fork} time, the @var{prepare} handlers are +called in LIFO order (last added with @code{pthread_atfork}, first +called before @code{fork}), while the @var{parent} and @var{child} +handlers are called in FIFO order (first added, first called). + +If there is insufficient memory available to register the handlers, +@code{pthread_atfork} fails and returns @code{ENOMEM}. Otherwise it +returns 0. +@end deftypefun + +To understand the purpose of @code{pthread_atfork}, recall that +@code{fork} duplicates the whole memory space, including mutexes in +their current locking state, but only the calling thread: other threads +are not running in the child process. Thus, if a mutex is locked by a +thread other than the thread calling @code{fork}, that mutex will remain +locked forever in the child process, possibly blocking the execution of +the child process. To avoid this, install handlers with +@code{pthread_atfork} as follows: the @var{prepare} handler locks the +global mutexes (in locking order), and the @var{parent} and @var{child} +handlers unlock them (in reverse order). Alternatively, @var{prepare} +and @var{parent} can be set to @code{NULL} and @var{child} to a function +that calls @code{pthread_mutex_init} on the global mutexes. + +@comment pthread.h +@comment GNU +@deftypefun void pthread_kill_other_threads_np (@var{void}) +@code{pthread_kill_other_threads_np} is a non-portable LinuxThreads extension. +It causes all threads in the program to terminate immediately, except +the calling thread which proceeds normally. It is intended to be +called just before a thread calls one of the @code{exec} functions, +e.g. @code{execve}. + +Termination of the other threads is not performed through +@code{pthread_cancel} and completely bypasses the cancellation +mechanism. Hence, the current settings for cancellation state and +cancellation type are ignored, and the cleanup handlers are not +executed in the terminated threads. + +According to POSIX 1003.1c, a successful @code{exec*} in one of the +threads should automatically terminate all other threads in the program. +This behavior is not yet implemented in LinuxThreads. Calling +@code{pthread_kill_other_threads_np} before @code{exec*} achieves much +of the same behavior, except that if @code{exec*} ultimately fails, then +all other threads are already killed. +@end deftypefun + +@comment pthread.h +@comment POSIX +@deftypefun int pthread_once (pthread_once_t *once_@var{control}, void (*@var{init_routine}) (void)) + +The purpose of @code{pthread_once} is to ensure that a piece of +initialization code is executed at most once. The @var{once_control} +argument points to a static or extern variable statically initialized +to @code{PTHREAD_ONCE_INIT}. + +The first time @code{pthread_once} is called with a given +@var{once_control} argument, it calls @var{init_routine} with no +argument and changes the value of the @var{once_control} variable to +record that initialization has been performed. Subsequent calls to +@code{pthread_once} with the same @code{once_control} argument do +nothing. + +@code{pthread_once} always returns 0. +@end deftypefun + +@comment pthread.h +@comment POSIX +@deftypefun int pthread_setschedparam (pthread_t target_@var{thread}, int @var{policy}, const struct sched_param *@var{param}) + +@code{pthread_setschedparam} sets the scheduling parameters for the +thread @var{target_thread} as indicated by @var{policy} and +@var{param}. @var{policy} can be either @code{SCHED_OTHER} (regular, +non-realtime scheduling), @code{SCHED_RR} (realtime, round-robin) or +@code{SCHED_FIFO} (realtime, first-in first-out). @var{param} specifies +the scheduling priority for the two realtime policies. See +@code{sched_setpolicy} for more information on scheduling policies. + +The realtime scheduling policies @code{SCHED_RR} and @code{SCHED_FIFO} +are available only to processes with superuser privileges. + +On success, @code{pthread_setschedparam} returns 0. On error it returns +one of the following codes: +@table @code +@item EINVAL +@var{policy} is not one of @code{SCHED_OTHER}, @code{SCHED_RR}, +@code{SCHED_FIFO}, or the priority value specified by @var{param} is not +valid for the specified policy + +@item EPERM +Realtime scheduling was requested but the calling process does not have +sufficient privileges. + +@item ESRCH +The @var{target_thread} is invalid or has already terminated + +@item EFAULT +@var{param} points outside the process memory space +@end table +@end deftypefun + +@comment pthread.h +@comment POSIX +@deftypefun int pthread_getschedparam (pthread_t target_@var{thread}, int *@var{policy}, struct sched_param *@var{param}) + +@code{pthread_getschedparam} retrieves the scheduling policy and +scheduling parameters for the thread @var{target_thread} and stores them +in the locations pointed to by @var{policy} and @var{param}, +respectively. + +@code{pthread_getschedparam} returns 0 on success, or one of the +following error codes on failure: +@table @code +@item ESRCH +The @var{target_thread} is invalid or has already terminated. + +@item EFAULT +@var{policy} or @var{param} point outside the process memory space. + +@end table +@end deftypefun |