6 files changed, 160 insertions, 1 deletions
diff --git a/libc/sysdeps/linux/arm/__longjmp.S b/libc/sysdeps/linux/arm/__longjmp.S
index 44837911b..822e15a69 100644
--- a/libc/sysdeps/linux/arm/__longjmp.S
+++ b/libc/sysdeps/linux/arm/__longjmp.S
@@ -33,9 +33,28 @@ __longjmp:
 	moveq	r0, #1		/* can't let setjmp() return zero! */
 
 #if defined __UCLIBC_HAS_FLOATS__ && ! defined __UCLIBC_HAS_SOFT_FLOAT__
+# ifdef __MAVERICK__
+	cfldrd	mvd4,  [ip], #8 ; nop
+	cfldrd	mvd5,  [ip], #8 ; nop
+	cfldrd	mvd6,  [ip], #8 ; nop
+	cfldrd	mvd7,  [ip], #8 ; nop
+	cfldrd	mvd8,  [ip], #8 ; nop
+	cfldrd	mvd9,  [ip], #8 ; nop
+	cfldrd	mvd10, [ip], #8 ; nop
+	cfldrd	mvd11, [ip], #8 ; nop
+	cfldrd	mvd12, [ip], #8 ; nop
+	cfldrd	mvd13, [ip], #8 ; nop
+	cfldrd	mvd14, [ip], #8 ; nop
+	cfldrd	mvd15, [ip], #8
+# else
 	lfmfd	f4, 4, [ip] !	/* load the floating point regs */
+# endif
 #else
+# ifdef __MAVERICK__
+	add		ip, ip, #96		/* skip the FP registers */
+# else
 	add		ip, ip, #48		/* skip the FP registers */
+# endif
 #endif	
 
 	ldmia     ip ,  {v1-v6, sl, fp, sp, pc}
diff --git a/libc/sysdeps/linux/arm/bits/endian.h b/libc/sysdeps/linux/arm/bits/endian.h
index 4f60bd7d2..27946cdee 100644
--- a/libc/sysdeps/linux/arm/bits/endian.h
+++ b/libc/sysdeps/linux/arm/bits/endian.h
@@ -12,7 +12,7 @@
 /* FPA floating point units are always big-endian, irrespective of the
    CPU endianness.  VFP floating point units use the same endianness
    as the rest of the system.  */
-#ifdef __VFP_FP__
+#if defined __VFP_FP__ || defined __MAVERICK__
 # define __FLOAT_WORD_ORDER __BYTE_ORDER 
 #else
 # define __FLOAT_WORD_ORDER __BIG_ENDIAN
diff --git a/libc/sysdeps/linux/arm/bits/fenv.h b/libc/sysdeps/linux/arm/bits/fenv.h
index 7bd242385..3764d7749 100644
--- a/libc/sysdeps/linux/arm/bits/fenv.h
+++ b/libc/sysdeps/linux/arm/bits/fenv.h
@@ -20,6 +20,45 @@
 # error "Never use <bits/fenv.h> directly; include <fenv.h> instead."
 #endif
 
+#ifdef __MAVERICK__
+
+/* Define bits representing exceptions in the FPU status word.  */
+enum
+  {
+    FE_INVALID = 1,
+#define FE_INVALID FE_INVALID
+    FE_OVERFLOW = 4,
+#define FE_OVERFLOW FE_OVERFLOW
+    FE_UNDERFLOW = 8,
+#define FE_UNDERFLOW FE_UNDERFLOW
+    FE_INEXACT = 16,
+#define FE_INEXACT FE_INEXACT
+  };
+
+/* Amount to shift by to convert an exception to a mask bit.  */
+#define FE_EXCEPT_SHIFT    5
+
+/* All supported exceptions.  */
+#define FE_ALL_EXCEPT  \
+	(FE_INVALID | FE_OVERFLOW | FE_UNDERFLOW | FE_INEXACT)
+
+/* IEEE rounding modes.  */
+enum
+  {
+    FE_TONEAREST = 0,
+#define FE_TONEAREST    FE_TONEAREST
+    FE_TOWARDZERO = 0x400,
+#define FE_TOWARDZERO   FE_TOWARDZERO
+    FE_DOWNWARD = 0x800,
+#define FE_DOWNWARD     FE_DOWNWARD
+    FE_UPWARD = 0xc00,
+#define FE_UPWARD       FE_UPWARD
+  };
+
+#define FE_ROUND_MASK (FE_UPWARD)
+
+#else /* !__MAVERICK__ */
+
 /* Define bits representing exceptions in the FPU status word.  */
 enum
   {
@@ -44,6 +83,8 @@ enum
    modes exist, but you have to encode them in the actual instruction.  */
 #define FE_TONEAREST	0
 
+#endif /* __MAVERICK__ */
+
 /* Type representing exception flags. */
 typedef unsigned long int fexcept_t;
 
diff --git a/libc/sysdeps/linux/arm/bits/setjmp.h b/libc/sysdeps/linux/arm/bits/setjmp.h
index dd8524303..e1d51468f 100644
--- a/libc/sysdeps/linux/arm/bits/setjmp.h
+++ b/libc/sysdeps/linux/arm/bits/setjmp.h
@@ -25,8 +25,12 @@
 #ifndef _ASM
 /* Jump buffer contains v1-v6, sl, fp, sp and pc.  Other registers are not
    saved.  */
+#ifdef __MAVERICK__
+typedef int __jmp_buf[34];
+#else
 typedef int __jmp_buf[22];
 #endif
+#endif
 
 #define __JMP_BUF_SP		20
 
diff --git a/libc/sysdeps/linux/arm/fpu_control.h b/libc/sysdeps/linux/arm/fpu_control.h
index 65912e496..8c13ca3a3 100644
--- a/libc/sysdeps/linux/arm/fpu_control.h
+++ b/libc/sysdeps/linux/arm/fpu_control.h
@@ -20,6 +20,76 @@
 #ifndef _FPU_CONTROL_H
 #define _FPU_CONTROL_H
 
+#ifdef __MAVERICK__
+
+/* DSPSC register: (from EP9312 User's Guide)
+ *
+ * bits 31..29	- DAID
+ * bits 28..26	- HVID
+ * bits 25..24	- RSVD
+ * bit  23	- ISAT
+ * bit  22	- UI
+ * bit  21	- INT
+ * bit  20	- AEXC
+ * bits 19..18	- SAT
+ * bits 17..16	- FCC
+ * bit  15	- V
+ * bit  14	- FWDEN
+ * bit  13	- Invalid
+ * bit	12	- Denorm
+ * bits 11..10	- RM
+ * bits 9..5	- IXE, UFE, OFE, RSVD, IOE
+ * bits 4..0	- IX, UF, OF, RSVD, IO
+ */
+
+/* masking of interrupts */
+#define _FPU_MASK_IM	(1 << 5)	/* invalid operation */
+#define _FPU_MASK_ZM	0		/* divide by zero */
+#define _FPU_MASK_OM	(1 << 7)	/* overflow */
+#define _FPU_MASK_UM	(1 << 8)	/* underflow */
+#define _FPU_MASK_PM	(1 << 9)	/* inexact */
+#define _FPU_MASK_DM	0		/* denormalized operation */
+
+#define _FPU_RESERVED	0xfffff000	/* These bits are reserved.  */
+
+#define _FPU_DEFAULT	0x00b00000	/* Default value.  */
+#define _FPU_IEEE	0x00b003a0	/* Default + exceptions enabled. */
+
+/* Type of the control word.  */
+typedef unsigned int fpu_control_t;
+
+/* Macros for accessing the hardware control word.  */
+#define _FPU_GETCW(cw) ({			\
+	register int __t1, __t2;		\
+						\
+	__asm__ volatile (			\
+	"cfmvr64l	%1, mvdx0\n\t"		\
+	"cfmvr64h	%2, mvdx0\n\t"		\
+	"cfmv32sc	mvdx0, dspsc\n\t"	\
+	"cfmvr64l	%0, mvdx0\n\t"		\
+	"cfmv64lr	mvdx0, %1\n\t"		\
+	"cfmv64hr	mvdx0, %2"		\
+	: "=r" (cw), "=r" (__t1), "=r" (__t2)	\
+	);					\
+})
+
+#define _FPU_SETCW(cw) ({			\
+	register int __t0, __t1, __t2;		\
+						\
+	__asm__ volatile (			\
+	"cfmvr64l	%1, mvdx0\n\t"		\
+	"cfmvr64h	%2, mvdx0\n\t"		\
+	"cfmv64lr	mvdx0, %0\n\t"		\
+	"cfmvsc32	dspsc, mvdx0\n\t"	\
+	"cfmv64lr	mvdx0, %1\n\t"		\
+	"cfmv64hr	mvdx0, %2"		\
+	: "=r" (__t0), "=r" (__t1), "=r" (__t2)	\
+	: "0" (cw)				\
+	);					\
+})
+
+#else /* !__MAVERICK__ */
+
 /* We have a slight terminology confusion here.  On the ARM, the register
  * we're interested in is actually the FPU status word - the FPU control
  * word is something different (which is implementation-defined and only
@@ -96,6 +166,8 @@ typedef unsigned int fpu_control_t;
 #define _FPU_GETCW(cw) __asm__ ("rfs %0" : "=r" (cw))
 #define _FPU_SETCW(cw) __asm__ ("wfs %0" : : "r" (cw))
 
+#endif /* __MAVERICK__ */
+
 /* Default control word set at startup.  */
 extern fpu_control_t __fpu_control;
 
diff --git a/libc/sysdeps/linux/arm/setjmp.S b/libc/sysdeps/linux/arm/setjmp.S
index 73f08b71d..4048d7934 100644
--- a/libc/sysdeps/linux/arm/setjmp.S
+++ b/libc/sysdeps/linux/arm/setjmp.S
@@ -28,14 +28,37 @@
 __sigsetjmp:
 	/* Save registers */
 #if defined __UCLIBC_HAS_FLOATS__ && ! defined __UCLIBC_HAS_SOFT_FLOAT__
+# ifdef __MAVERICK__
+	cfstrd	mvd4,  [r0], #8 ; nop
+	cfstrd	mvd5,  [r0], #8 ; nop
+	cfstrd	mvd6,  [r0], #8 ; nop
+	cfstrd	mvd7,  [r0], #8 ; nop
+	cfstrd	mvd8,  [r0], #8 ; nop
+	cfstrd	mvd9,  [r0], #8 ; nop
+	cfstrd	mvd10, [r0], #8 ; nop
+	cfstrd	mvd11, [r0], #8 ; nop
+	cfstrd	mvd12, [r0], #8 ; nop
+	cfstrd	mvd13, [r0], #8 ; nop
+	cfstrd	mvd14, [r0], #8 ; nop
+	cfstrd	mvd15, [r0], #8
+# else
 	sfmea   f4, 4, [r0]!
+# endif
 #else
+# ifdef __MAVERICK__
+	add     r0, r0, #96		/* skip the FP registers */
+# else
 	add     r0, r0, #48		/* skip the FP registers */
+# endif
 #endif
 	stmia   r0, {v1-v6, sl, fp, sp, lr}
 
 	/* Restore pointer to jmp_buf */
+#ifdef __MAVERICK__
+	sub     r0, r0, #96
+#else
 	sub     r0, r0, #48
+#endif
 
 	/* Make a tail call to __sigjmp_save; it takes the same args.  */
 #ifdef __PIC__