diff options
Diffstat (limited to 'extra')
| -rw-r--r-- | extra/Configs/Config.alpha | 17 | ||||
| -rw-r--r-- | extra/Configs/Config.arm | 11 | ||||
| -rw-r--r-- | extra/Configs/Config.cross.arm.uclinux | 20 | ||||
| -rw-r--r-- | extra/Configs/Config.h8300 | 25 | ||||
| -rw-r--r-- | extra/Configs/Config.i386 | 11 | ||||
| -rw-r--r-- | extra/Configs/Config.i960 | 27 | ||||
| -rw-r--r-- | extra/Configs/Config.m68k | 11 | ||||
| -rw-r--r-- | extra/Configs/Config.m68k.coff | 20 | ||||
| -rw-r--r-- | extra/Configs/Config.mips | 15 | ||||
| -rw-r--r-- | extra/Configs/Config.mipsel | 15 | ||||
| -rw-r--r-- | extra/Configs/Config.powerpc | 17 | ||||
| -rw-r--r-- | extra/Configs/Config.sh | 11 | ||||
| -rw-r--r-- | extra/Configs/Config.sparc | 17 | ||||
| -rw-r--r-- | extra/Configs/Config.v850e | 13 |
14 files changed, 164 insertions, 66 deletions
diff --git a/extra/Configs/Config.alpha b/extra/Configs/Config.alpha index 8fbfbf375..614384df6 100644 --- a/extra/Configs/Config.alpha +++ b/extra/Configs/Config.alpha @@ -176,7 +176,6 @@ SHARED_LIB_LOADER_PATH=$(DEVEL_PREFIX)/lib # environment will be installed. The result will look something # like the following: # DEVEL_PREFIX/ -# bin/ <contains gcc, ld, etc> # lib/ <contains all runtime and static libs> # include/ <Where all the header files go> # This value is used by the 'make install' Makefile target. Since this @@ -185,13 +184,21 @@ SHARED_LIB_LOADER_PATH=$(DEVEL_PREFIX)/lib DEVEL_PREFIX = /usr/$(TARGET_ARCH)-linux-uclibc # SYSTEM_DEVEL_PREFIX is the directory prefix used when installing -# usr/bin/arch-uclibc-gcc, usr/bin/arch-uclibc-ld, etc. This is only -# used by the 'make install' target, and is not compiled into anything. -# This defaults to $DEVEL_PREFIX, but makers of .rpms and .debs will -# want to set this to "/" instead. +# bin/arch-uclibc-gcc, bin/arch-uclibc-ld, etc. This is only used by +# the 'make install' target, and is not compiled into anything. This +# defaults to $DEVEL_PREFIX/usr, but makers of .rpms and .debs will +# want to set this to "/usr" instead. SYSTEM_DEVEL_PREFIX = $(DEVEL_PREFIX) +# DEVEL_TOOL_PREFIX is the directory prefix used when installing +# bin/gcc, bin/ld, etc. This is only used by the 'make install' +# target, and is not compiled into anything. This defaults to +# $DEVEL_PREFIX/usr, but makers of .rpms and .debs may want to +# set this to something else. +DEVEL_TOOL_PREFIX = $(DEVEL_PREFIX)/usr + # If you want 'make install' to install everything under a temporary # directory, the define PREFIX during the install step, # i.e., 'make PREFIX=/var/tmp/uClibc install'. #PREFIX = $(TOPDIR)/_install + diff --git a/extra/Configs/Config.arm b/extra/Configs/Config.arm index 3e4ded20a..528d9c8b9 100644 --- a/extra/Configs/Config.arm +++ b/extra/Configs/Config.arm @@ -177,7 +177,6 @@ SHARED_LIB_LOADER_PATH=$(DEVEL_PREFIX)/lib # environment will be installed. The result will look something # like the following: # DEVEL_PREFIX/ -# bin/ <contains gcc, ld, etc> # lib/ <contains all runtime and static libs> # include/ <Where all the header files go> # This value is used by the 'make install' Makefile target. Since this @@ -190,9 +189,17 @@ DEVEL_PREFIX = /usr/$(TARGET_ARCH)-linux-uclibc # the 'make install' target, and is not compiled into anything. This # defaults to $DEVEL_PREFIX/usr, but makers of .rpms and .debs will # want to set this to "/usr" instead. -SYSTEM_DEVEL_PREFIX = $(DEVEL_PREFIX)/usr +SYSTEM_DEVEL_PREFIX = $(DEVEL_PREFIX) + +# DEVEL_TOOL_PREFIX is the directory prefix used when installing +# bin/gcc, bin/ld, etc. This is only used by the 'make install' +# target, and is not compiled into anything. This defaults to +# $DEVEL_PREFIX/usr, but makers of .rpms and .debs may want to +# set this to something else. +DEVEL_TOOL_PREFIX = $(DEVEL_PREFIX)/usr # If you want 'make install' to install everything under a temporary # directory, the define PREFIX during the install step, # i.e., 'make PREFIX=/var/tmp/uClibc install'. #PREFIX = $(TOPDIR)/_install + diff --git a/extra/Configs/Config.cross.arm.uclinux b/extra/Configs/Config.cross.arm.uclinux index 2a2abaeb6..9c474dc5a 100644 --- a/extra/Configs/Config.cross.arm.uclinux +++ b/extra/Configs/Config.cross.arm.uclinux @@ -174,22 +174,30 @@ BUILD_UCLIBC_LDSO=false # environment will be installed. The result will look something # like the following: # DEVEL_PREFIX/ -# bin/ <contains gcc, ld, etc> # lib/ <contains all runtime and static libs> # include/ <Where all the header files go> # This value is used by the 'make install' Makefile target. Since this # directory is compiled into the uclibc cross compiler spoofer, you # have to recompile if you change this value... +#DEVEL_PREFIX = /usr/$(TARGET_ARCH)-linux-uclibc DEVEL_PREFIX = /opt/uClinux/$(TARGET_ARCH)-elf # SYSTEM_DEVEL_PREFIX is the directory prefix used when installing -# usr/bin/arch-uclibc-gcc, usr/bin/arch-uclibc-ld, etc. This is only -# used by the 'make install' target, and is not compiled into anything. -# This defaults to $DEVEL_PREFIX, but makers of .rpms and .debs will -# want to set this to "/" instead. -SYSTEM_DEVEL_PREFIX = / +# bin/arch-uclibc-gcc, bin/arch-uclibc-ld, etc. This is only used by +# the 'make install' target, and is not compiled into anything. This +# defaults to $DEVEL_PREFIX/usr, but makers of .rpms and .debs will +# want to set this to "/usr" instead. +SYSTEM_DEVEL_PREFIX = $(DEVEL_PREFIX) + +# DEVEL_TOOL_PREFIX is the directory prefix used when installing +# bin/gcc, bin/ld, etc. This is only used by the 'make install' +# target, and is not compiled into anything. This defaults to +# $DEVEL_PREFIX/usr, but makers of .rpms and .debs may want to +# set this to something else. +DEVEL_TOOL_PREFIX = $(DEVEL_PREFIX)/usr # If you want 'make install' to install everything under a temporary # directory, the define PREFIX during the install step, # i.e., 'make PREFIX=/var/tmp/uClibc install'. #PREFIX = $(TOPDIR)/_install + diff --git a/extra/Configs/Config.h8300 b/extra/Configs/Config.h8300 index fab139099..9d27b7e9c 100644 --- a/extra/Configs/Config.h8300 +++ b/extra/Configs/Config.h8300 @@ -168,30 +168,37 @@ BUILD_UCLIBC_LDSO=false # sitting in the directory this points to, your binaries will not run. #SHARED_LIB_LOADER_PATH=$(DEVEL_PREFIX)/lib +# C defiend symbols prefix charactor +C_SYMBOL_PREFIX = _ + # DEVEL_PREFIX is the directory into which the uClibc development # environment will be installed. The result will look something # like the following: # DEVEL_PREFIX/ -# bin/ <contains gcc, ld, etc> # lib/ <contains all runtime and static libs> # include/ <Where all the header files go> # This value is used by the 'make install' Makefile target. Since this # directory is compiled into the uclibc cross compiler spoofer, you # have to recompile if you change this value... +#DEVEL_PREFIX = /usr/$(TARGET_ARCH)-linux-uclibc DEVEL_PREFIX = /opt/uClinux/$(TARGET_ARCH)-coff # SYSTEM_DEVEL_PREFIX is the directory prefix used when installing -# usr/bin/arch-uclibc-gcc, usr/bin/arch-uclibc-ld, etc. This is only -# used by the 'make install' target, and is not compiled into anything. -# This defaults to $DEVEL_PREFIX, but makers of .rpms and .debs will -# want to set this to "/" instead. -SYSTEM_DEVEL_PREFIX = / +# bin/arch-uclibc-gcc, bin/arch-uclibc-ld, etc. This is only used by +# the 'make install' target, and is not compiled into anything. This +# defaults to $DEVEL_PREFIX/usr, but makers of .rpms and .debs will +# want to set this to "/usr" instead. +SYSTEM_DEVEL_PREFIX = $(DEVEL_PREFIX) + +# DEVEL_TOOL_PREFIX is the directory prefix used when installing +# bin/gcc, bin/ld, etc. This is only used by the 'make install' +# target, and is not compiled into anything. This defaults to +# $DEVEL_PREFIX/usr, but makers of .rpms and .debs may want to +# set this to something else. +DEVEL_TOOL_PREFIX = $(DEVEL_PREFIX)/usr # If you want 'make install' to install everything under a temporary # directory, the define PREFIX during the install step, # i.e., 'make PREFIX=/var/tmp/uClibc install'. #PREFIX = $(TOPDIR)/_install -PREFIX = -# C defiend symbols prefix charactor -C_SYMBOL_PREFIX = _ diff --git a/extra/Configs/Config.i386 b/extra/Configs/Config.i386 index f107f6cc1..c2e3d3607 100644 --- a/extra/Configs/Config.i386 +++ b/extra/Configs/Config.i386 @@ -173,7 +173,6 @@ SHARED_LIB_LOADER_PATH=$(DEVEL_PREFIX)/lib # environment will be installed. The result will look something # like the following: # DEVEL_PREFIX/ -# bin/ <contains gcc, ld, etc> # lib/ <contains all runtime and static libs> # include/ <Where all the header files go> # This value is used by the 'make install' Makefile target. Since this @@ -186,9 +185,17 @@ DEVEL_PREFIX = /usr/$(TARGET_ARCH)-linux-uclibc # the 'make install' target, and is not compiled into anything. This # defaults to $DEVEL_PREFIX/usr, but makers of .rpms and .debs will # want to set this to "/usr" instead. -SYSTEM_DEVEL_PREFIX = $(DEVEL_PREFIX)/usr +SYSTEM_DEVEL_PREFIX = $(DEVEL_PREFIX) + +# DEVEL_TOOL_PREFIX is the directory prefix used when installing +# bin/gcc, bin/ld, etc. This is only used by the 'make install' +# target, and is not compiled into anything. This defaults to +# $DEVEL_PREFIX/usr, but makers of .rpms and .debs may want to +# set this to something else. +DEVEL_TOOL_PREFIX = $(DEVEL_PREFIX)/usr # If you want 'make install' to install everything under a temporary # directory, the define PREFIX during the install step, # i.e., 'make PREFIX=/var/tmp/uClibc install'. #PREFIX = $(TOPDIR)/_install + diff --git a/extra/Configs/Config.i960 b/extra/Configs/Config.i960 index 6ee2352a7..2004bfef3 100644 --- a/extra/Configs/Config.i960 +++ b/extra/Configs/Config.i960 @@ -189,31 +189,36 @@ BUILD_UCLIBC_LDSO=false # sitting in the directory this points to, your binaries will not run. #SHARED_LIB_LOADER_PATH=$(DEVEL_PREFIX)/lib +# C defiend symbols prefix charactor +C_SYMBOL_PREFIX = _ + # DEVEL_PREFIX is the directory into which the uClibc development # environment will be installed. The result will look something # like the following: # DEVEL_PREFIX/ -# bin/ <contains gcc, ld, etc> # lib/ <contains all runtime and static libs> # include/ <Where all the header files go> # This value is used by the 'make install' Makefile target. Since this # directory is compiled into the uclibc cross compiler spoofer, you # have to recompile if you change this value... -DEVEL_PREFIX = /usr/local/cross-compilers/i960-intel-coff +DEVEL_PREFIX = /usr/$(TARGET_ARCH)-linux-uclibc # SYSTEM_DEVEL_PREFIX is the directory prefix used when installing -# usr/bin/arch-uclibc-gcc, usr/bin/arch-uclibc-ld, etc. This is only -# used by the 'make install' target, and is not compiled into anything. -# This defaults to $DEVEL_PREFIX, but makers of .rpms and .debs will -# want to set this to "/" instead. -#SYSTEM_DEVEL_PREFIX = $(DEVEL_PREFIX) -SYSTEM_DEVEL_PREFIX = /tmp/uclibc-trashed +# bin/arch-uclibc-gcc, bin/arch-uclibc-ld, etc. This is only used by +# the 'make install' target, and is not compiled into anything. This +# defaults to $DEVEL_PREFIX/usr, but makers of .rpms and .debs will +# want to set this to "/usr" instead. +SYSTEM_DEVEL_PREFIX = $(DEVEL_PREFIX) + +# DEVEL_TOOL_PREFIX is the directory prefix used when installing +# bin/gcc, bin/ld, etc. This is only used by the 'make install' +# target, and is not compiled into anything. This defaults to +# $DEVEL_PREFIX/usr, but makers of .rpms and .debs may want to +# set this to something else. +DEVEL_TOOL_PREFIX = $(DEVEL_PREFIX)/usr # If you want 'make install' to install everything under a temporary # directory, the define PREFIX during the install step, # i.e., 'make PREFIX=/var/tmp/uClibc install'. #PREFIX = $(TOPDIR)/_install -# C defiend symbols prefix charactor -C_SYMBOL_PREFIX = _ - diff --git a/extra/Configs/Config.m68k b/extra/Configs/Config.m68k index 4686d869f..ea85f38a2 100644 --- a/extra/Configs/Config.m68k +++ b/extra/Configs/Config.m68k @@ -186,7 +186,6 @@ SHARED_LIB_LOADER_PATH=$(DEVEL_PREFIX)/lib # environment will be installed. The result will look something # like the following: # DEVEL_PREFIX/ -# bin/ <contains gcc, ld, etc> # lib/ <contains all runtime and static libs> # include/ <Where all the header files go> # This value is used by the 'make install' Makefile target. Since this @@ -199,9 +198,17 @@ DEVEL_PREFIX = /usr/$(TARGET_ARCH)-linux-uclibc # the 'make install' target, and is not compiled into anything. This # defaults to $DEVEL_PREFIX/usr, but makers of .rpms and .debs will # want to set this to "/usr" instead. -SYSTEM_DEVEL_PREFIX = $(DEVEL_PREFIX)/usr +SYSTEM_DEVEL_PREFIX = $(DEVEL_PREFIX) + +# DEVEL_TOOL_PREFIX is the directory prefix used when installing +# bin/gcc, bin/ld, etc. This is only used by the 'make install' +# target, and is not compiled into anything. This defaults to +# $DEVEL_PREFIX/usr, but makers of .rpms and .debs may want to +# set this to something else. +DEVEL_TOOL_PREFIX = $(DEVEL_PREFIX)/usr # If you want 'make install' to install everything under a temporary # directory, the define PREFIX during the install step, # i.e., 'make PREFIX=/var/tmp/uClibc install'. #PREFIX = $(TOPDIR)/_install + diff --git a/extra/Configs/Config.m68k.coff b/extra/Configs/Config.m68k.coff index e35dc020c..4a340943c 100644 --- a/extra/Configs/Config.m68k.coff +++ b/extra/Configs/Config.m68k.coff @@ -189,22 +189,30 @@ BUILD_UCLIBC_LDSO=false # environment will be installed. The result will look something # like the following: # DEVEL_PREFIX/ -# bin/ <contains gcc, ld, etc> # lib/ <contains all runtime and static libs> # include/ <Where all the header files go> # This value is used by the 'make install' Makefile target. Since this # directory is compiled into the uclibc cross compiler spoofer, you # have to recompile if you change this value... +#DEVEL_PREFIX = /usr/$(TARGET_ARCH)-linux-uclibc DEVEL_PREFIX = /opt/uClinux/$(TARGET_ARCH)-coff # SYSTEM_DEVEL_PREFIX is the directory prefix used when installing -# usr/bin/arch-uclibc-gcc, usr/bin/arch-uclibc-ld, etc. This is only -# used by the 'make install' target, and is not compiled into anything. -# This defaults to $DEVEL_PREFIX, but makers of .rpms and .debs will -# want to set this to "/" instead. -SYSTEM_DEVEL_PREFIX = / +# bin/arch-uclibc-gcc, bin/arch-uclibc-ld, etc. This is only used by +# the 'make install' target, and is not compiled into anything. This +# defaults to $DEVEL_PREFIX/usr, but makers of .rpms and .debs will +# want to set this to "/usr" instead. +SYSTEM_DEVEL_PREFIX = $(DEVEL_PREFIX) + +# DEVEL_TOOL_PREFIX is the directory prefix used when installing +# bin/gcc, bin/ld, etc. This is only used by the 'make install' +# target, and is not compiled into anything. This defaults to +# $DEVEL_PREFIX/usr, but makers of .rpms and .debs may want to +# set this to something else. +DEVEL_TOOL_PREFIX = $(DEVEL_PREFIX)/usr # If you want 'make install' to install everything under a temporary # directory, the define PREFIX during the install step, # i.e., 'make PREFIX=/var/tmp/uClibc install'. #PREFIX = $(TOPDIR)/_install + diff --git a/extra/Configs/Config.mips b/extra/Configs/Config.mips index d2868bead..8b3b1b247 100644 --- a/extra/Configs/Config.mips +++ b/extra/Configs/Config.mips @@ -174,7 +174,6 @@ SHARED_LIB_LOADER_PATH = $(DEVEL_PREFIX)/lib # environment will be installed. The result will look something # like the following: # DEVEL_PREFIX/ -# bin/ <contains gcc, ld, etc> # lib/ <contains all runtime and static libs> # include/ <Where all the header files go> # This value is used by the 'make install' Makefile target. Since this @@ -187,9 +186,17 @@ DEVEL_PREFIX = /usr/$(TARGET_ARCH)-linux-uclibc # the 'make install' target, and is not compiled into anything. This # defaults to $DEVEL_PREFIX/usr, but makers of .rpms and .debs will # want to set this to "/usr" instead. -SYSTEM_DEVEL_PREFIX = /usr +SYSTEM_DEVEL_PREFIX = $(DEVEL_PREFIX) + +# DEVEL_TOOL_PREFIX is the directory prefix used when installing +# bin/gcc, bin/ld, etc. This is only used by the 'make install' +# target, and is not compiled into anything. This defaults to +# $DEVEL_PREFIX/usr, but makers of .rpms and .debs may want to +# set this to something else. +DEVEL_TOOL_PREFIX = $(DEVEL_PREFIX)/usr # If you want 'make install' to install everything under a temporary -# directory, then define PREFIX during the install step, +# directory, the define PREFIX during the install step, # i.e., 'make PREFIX=/var/tmp/uClibc install'. -PREFIX = $(TOPDIR)/_install +#PREFIX = $(TOPDIR)/_install + diff --git a/extra/Configs/Config.mipsel b/extra/Configs/Config.mipsel index c5df6ce0a..9c2c89d57 100644 --- a/extra/Configs/Config.mipsel +++ b/extra/Configs/Config.mipsel @@ -174,7 +174,6 @@ SHARED_LIB_LOADER_PATH = /lib # environment will be installed. The result will look something # like the following: # DEVEL_PREFIX/ -# bin/ <contains gcc, ld, etc> # lib/ <contains all runtime and static libs> # include/ <Where all the header files go> # This value is used by the 'make install' Makefile target. Since this @@ -187,9 +186,17 @@ DEVEL_PREFIX = /usr/$(TARGET_ARCH)-linux-uclibc # the 'make install' target, and is not compiled into anything. This # defaults to $DEVEL_PREFIX/usr, but makers of .rpms and .debs will # want to set this to "/usr" instead. -SYSTEM_DEVEL_PREFIX = /usr +SYSTEM_DEVEL_PREFIX = $(DEVEL_PREFIX) + +# DEVEL_TOOL_PREFIX is the directory prefix used when installing +# bin/gcc, bin/ld, etc. This is only used by the 'make install' +# target, and is not compiled into anything. This defaults to +# $DEVEL_PREFIX/usr, but makers of .rpms and .debs may want to +# set this to something else. +DEVEL_TOOL_PREFIX = $(DEVEL_PREFIX)/usr # If you want 'make install' to install everything under a temporary -# directory, then define PREFIX during the install step, +# directory, the define PREFIX during the install step, # i.e., 'make PREFIX=/var/tmp/uClibc install'. -PREFIX = $(TOPDIR)/_install +#PREFIX = $(TOPDIR)/_install + diff --git a/extra/Configs/Config.powerpc b/extra/Configs/Config.powerpc index 3c8ab7a17..c93590ed9 100644 --- a/extra/Configs/Config.powerpc +++ b/extra/Configs/Config.powerpc @@ -176,7 +176,6 @@ SHARED_LIB_LOADER_PATH=$(DEVEL_PREFIX)/lib # environment will be installed. The result will look something # like the following: # DEVEL_PREFIX/ -# bin/ <contains gcc, ld, etc> # lib/ <contains all runtime and static libs> # include/ <Where all the header files go> # This value is used by the 'make install' Makefile target. Since this @@ -185,13 +184,21 @@ SHARED_LIB_LOADER_PATH=$(DEVEL_PREFIX)/lib DEVEL_PREFIX = /usr/$(TARGET_ARCH)-linux-uclibc # SYSTEM_DEVEL_PREFIX is the directory prefix used when installing -# usr/bin/arch-uclibc-gcc, usr/bin/arch-uclibc-ld, etc. This is only -# used by the 'make install' target, and is not compiled into anything. -# This defaults to $DEVEL_PREFIX, but makers of .rpms and .debs will -# want to set this to "/" instead. +# bin/arch-uclibc-gcc, bin/arch-uclibc-ld, etc. This is only used by +# the 'make install' target, and is not compiled into anything. This +# defaults to $DEVEL_PREFIX/usr, but makers of .rpms and .debs will +# want to set this to "/usr" instead. SYSTEM_DEVEL_PREFIX = $(DEVEL_PREFIX) +# DEVEL_TOOL_PREFIX is the directory prefix used when installing +# bin/gcc, bin/ld, etc. This is only used by the 'make install' +# target, and is not compiled into anything. This defaults to +# $DEVEL_PREFIX/usr, but makers of .rpms and .debs may want to +# set this to something else. +DEVEL_TOOL_PREFIX = $(DEVEL_PREFIX)/usr + # If you want 'make install' to install everything under a temporary # directory, the define PREFIX during the install step, # i.e., 'make PREFIX=/var/tmp/uClibc install'. #PREFIX = $(TOPDIR)/_install + diff --git a/extra/Configs/Config.sh b/extra/Configs/Config.sh index a46b823c1..0bf18d9fa 100644 --- a/extra/Configs/Config.sh +++ b/extra/Configs/Config.sh @@ -193,7 +193,6 @@ SHARED_LIB_LOADER_PATH=$(DEVEL_PREFIX)/lib # environment will be installed. The result will look something # like the following: # DEVEL_PREFIX/ -# bin/ <contains gcc, ld, etc> # lib/ <contains all runtime and static libs> # include/ <Where all the header files go> # This value is used by the 'make install' Makefile target. Since this @@ -206,9 +205,17 @@ DEVEL_PREFIX = /usr/$(TARGET_ARCH)-linux-uclibc # the 'make install' target, and is not compiled into anything. This # defaults to $DEVEL_PREFIX/usr, but makers of .rpms and .debs will # want to set this to "/usr" instead. -SYSTEM_DEVEL_PREFIX = $(DEVEL_PREFIX)/usr +SYSTEM_DEVEL_PREFIX = $(DEVEL_PREFIX) + +# DEVEL_TOOL_PREFIX is the directory prefix used when installing +# bin/gcc, bin/ld, etc. This is only used by the 'make install' +# target, and is not compiled into anything. This defaults to +# $DEVEL_PREFIX/usr, but makers of .rpms and .debs may want to +# set this to something else. +DEVEL_TOOL_PREFIX = $(DEVEL_PREFIX)/usr # If you want 'make install' to install everything under a temporary # directory, the define PREFIX during the install step, # i.e., 'make PREFIX=/var/tmp/uClibc install'. #PREFIX = $(TOPDIR)/_install + diff --git a/extra/Configs/Config.sparc b/extra/Configs/Config.sparc index bfd3c6904..00dc30ff5 100644 --- a/extra/Configs/Config.sparc +++ b/extra/Configs/Config.sparc @@ -181,7 +181,6 @@ SHARED_LIB_LOADER_PATH=$(DEVEL_PREFIX)/lib # environment will be installed. The result will look something # like the following: # DEVEL_PREFIX/ -# bin/ <contains gcc, ld, etc> # lib/ <contains all runtime and static libs> # include/ <Where all the header files go> # This value is used by the 'make install' Makefile target. Since this @@ -190,13 +189,21 @@ SHARED_LIB_LOADER_PATH=$(DEVEL_PREFIX)/lib DEVEL_PREFIX = /usr/$(TARGET_ARCH)-linux-uclibc # SYSTEM_DEVEL_PREFIX is the directory prefix used when installing -# usr/bin/arch-uclibc-gcc, usr/bin/arch-uclibc-ld, etc. This is only -# used by the 'make install' target, and is not compiled into anything. -# This defaults to $DEVEL_PREFIX, but makers of .rpms and .debs will -# want to set this to "/" instead. +# bin/arch-uclibc-gcc, bin/arch-uclibc-ld, etc. This is only used by +# the 'make install' target, and is not compiled into anything. This +# defaults to $DEVEL_PREFIX/usr, but makers of .rpms and .debs will +# want to set this to "/usr" instead. SYSTEM_DEVEL_PREFIX = $(DEVEL_PREFIX) +# DEVEL_TOOL_PREFIX is the directory prefix used when installing +# bin/gcc, bin/ld, etc. This is only used by the 'make install' +# target, and is not compiled into anything. This defaults to +# $DEVEL_PREFIX/usr, but makers of .rpms and .debs may want to +# set this to something else. +DEVEL_TOOL_PREFIX = $(DEVEL_PREFIX)/usr + # If you want 'make install' to install everything under a temporary # directory, the define PREFIX during the install step, # i.e., 'make PREFIX=/var/tmp/uClibc install'. #PREFIX = $(TOPDIR)/_install + diff --git a/extra/Configs/Config.v850e b/extra/Configs/Config.v850e index ba60a83d7..39b5f8f7e 100644 --- a/extra/Configs/Config.v850e +++ b/extra/Configs/Config.v850e @@ -175,22 +175,29 @@ SHARED_LIB_LOADER_PATH=$(DEVEL_PREFIX)/lib # environment will be installed. The result will look something # like the following: # DEVEL_PREFIX/ -# bin/ <contains gcc, ld, etc> # lib/ <contains all runtime and static libs> # include/ <Where all the header files go> # This value is used by the 'make install' Makefile target. Since this # directory is compiled into the uclibc cross compiler spoofer, you # have to recompile if you change this value... -DEVEL_PREFIX = $(DESTDIR)/$(TARGET_ARCH)-uclibc +DEVEL_PREFIX = /usr/$(TARGET_ARCH)-linux-uclibc # SYSTEM_DEVEL_PREFIX is the directory prefix used when installing # bin/arch-uclibc-gcc, bin/arch-uclibc-ld, etc. This is only used by # the 'make install' target, and is not compiled into anything. This # defaults to $DEVEL_PREFIX/usr, but makers of .rpms and .debs will # want to set this to "/usr" instead. -SYSTEM_DEVEL_PREFIX = $(DESTDIR) +SYSTEM_DEVEL_PREFIX = $(DEVEL_PREFIX) + +# DEVEL_TOOL_PREFIX is the directory prefix used when installing +# bin/gcc, bin/ld, etc. This is only used by the 'make install' +# target, and is not compiled into anything. This defaults to +# $DEVEL_PREFIX/usr, but makers of .rpms and .debs may want to +# set this to something else. +DEVEL_TOOL_PREFIX = $(DEVEL_PREFIX)/usr # If you want 'make install' to install everything under a temporary # directory, the define PREFIX during the install step, # i.e., 'make PREFIX=/var/tmp/uClibc install'. #PREFIX = $(TOPDIR)/_install + |