diff options
Diffstat (limited to 'extra/Configs')
| -rw-r--r-- | extra/Configs/Config.arm | 78 | ||||
| -rw-r--r-- | extra/Configs/Config.cross.arm.uclinux | 74 | ||||
| -rw-r--r-- | extra/Configs/Config.i386 | 78 | ||||
| -rw-r--r-- | extra/Configs/Config.m68k | 73 | ||||
| -rw-r--r-- | extra/Configs/Config.m68k.coff | 74 | ||||
| -rw-r--r-- | extra/Configs/Config.mips | 78 | ||||
| -rw-r--r-- | extra/Configs/Config.mipsel | 78 | ||||
| -rw-r--r-- | extra/Configs/Config.powerpc | 81 | ||||
| -rw-r--r-- | extra/Configs/Config.sh | 75 |
9 files changed, 427 insertions, 262 deletions
diff --git a/extra/Configs/Config.arm b/extra/Configs/Config.arm index ee2d52804..5e7ce4db9 100644 --- a/extra/Configs/Config.arm +++ b/extra/Configs/Config.arm @@ -50,9 +50,6 @@ DODEBUG = false # Compiler warnings you want to see WARNINGS=-Wall -# Enable support for shared libraries? -HAVE_SHARED = true - # Note that the kernel source you use to compile with should be the same as the # Linux kernel you run your apps on. uClibc doesn't even try to achieve binary # compatibility across kernel versions. So don't expect, for example, uClibc @@ -112,8 +109,8 @@ LOCALE_DIR = "/usr/share/uClibc-locale/" # It is actually smaller than "malloc", at least on i386. Right now, it # only works on i386 (and maybe m68k) because it needs sbrk. #MALLOC = malloc-simple -MALLOC = malloc -#MALLOC = malloc-930716 +#MALLOC = malloc +MALLOC = malloc-930716 # If you want to collect common syscall code into one function, set to this to # `true'. Set it to false otherwise. @@ -139,30 +136,51 @@ INCLUDE_IPV6 = false # If you want to compile the library as PIC code, turn this on. DOPIC = false -# PREFIX is the directory prefix that is applied to all installed -# files. Typically, it is set to /usr or /usr/local, although it could -# also be /opt/vendor_name_here/some/random/path/. The install_runtime -# makefile target installs a few symbolic links based on PREFIX, not -# DEVEL_PREFIX. -# -# DEVEL_PREFIX is the directory where the development environment will -# be installed. The uClibc header files are installed into -# $(DEVEL_PREFIX)/include, static libraries are installed into -# $(DEVEL_PREFIX)/lib, etc. This directory is compiled into the uclibc -# cross compiler spoofer. Generally, DEVEL_PREFIX should be set to -# the same thing as $(PREFIX). DEVEL_PREFIX is used by the Makefile install -# targets install_gcc, install_dev, and install_runtime. + + +# Enable support for shared libraries? If this is false, you can +# ignore all the rest of the options in this file... +HAVE_SHARED = true + +# uClibc has a native shared library loader for some architectures. +BUILD_UCLIBC_LDSO=true + +# If you are using shared libraries, but do not want/have a native +# uClibc shared library loader, please specify the name of your +# system's shared library loader here... +#SYSTEM_LDSO=/lib/ld-linux.so.2 + +# When using shared libraries, this path is the location where the +# shared library will be invoked. This value will be compiled into +# every binary compiled with uClibc. # -# TARGET_PREFIX is the directory into which the target runtime -# environment is installed. The target runtime environment is what one -# would use for a embedded system where uclibc is the native libaray. -# This will typically be a staging area for creating a root filesystem -# for the target system, so the default is in the local directory. -# -# If you want to install to a temporary directory before copying files -# to their final location, define DESTDIR during the install step, -# i.e., 'make install DESTDIR=/home/foo/uclibc/_install'. -PREFIX = /usr/$(TARGET_ARCH)-linux-uclibc -DEVEL_PREFIX = $(PREFIX) -TARGET_PREFIX = / +# BIG FAT WARNING: +# If you do not have a shared library loader with the correct name +# sitting in the directory this points to, your binaries will not run. +SHARED_LIB_LOADER_PATH=$(DEVEL_PREFIX)/lib + +# DEVEL_PREFIX is the directory into which the uClibc development +# environment will be installed. The result will look something +# like the following: +# DEVEL_PREFIX/ +# bin/ <contains gcc, ld, etc> +# lib/ <contains all runtime and static libs> +# include/ <Where all the header files go> +# This value is used by the 'make install' Makefile target. Since this +# directory is compiled into the uclibc cross compiler spoofer, you +# have to recompile if you change this value... +DEVEL_PREFIX = /usr/$(TARGET_ARCH)-linux-uclibc + +# SYSTEM_DEVEL_PREFIX is the directory prefix used when installing +# usr/bin/arch-uclibc-gcc, usr/bin/arch-uclibc-ld, etc. This is only +# used by the 'make install' target, and is not compiled into anything. +# This defaults to $DEVEL_PREFIX, but makers of .rpms and .debs will +# want to set this to "/" instead. +SYSTEM_DEVEL_PREFIX = $(DEVEL_PREFIX) + +# If you want 'make install' to install everything under a temporary +# directory, the define PREFIX during the install step, +# i.e., 'make PREFIX=/var/tmp/uClibc install'. +#PREFIX = $(TOPDIR)/_install +PREFIX = diff --git a/extra/Configs/Config.cross.arm.uclinux b/extra/Configs/Config.cross.arm.uclinux index 344273efb..cc3501f70 100644 --- a/extra/Configs/Config.cross.arm.uclinux +++ b/extra/Configs/Config.cross.arm.uclinux @@ -50,9 +50,6 @@ DODEBUG = false # Compiler warnings you want to see WARNINGS=-Wall -# Enable support for shared libraries? -HAVE_SHARED = false - # Note that the kernel source you use to compile with should be the same as the # Linux kernel you run your apps on. uClibc doesn't even try to achieve binary # compatibility across kernel versions. So don't expect, for example, uClibc @@ -139,30 +136,51 @@ INCLUDE_IPV6 = false # If you want to compile the library as PIC code, turn this on. DOPIC = false -# PREFIX is the directory prefix that is applied to all installed -# files. Typically, it is set to /usr or /usr/local, although it could -# also be /opt/vendor_name_here/some/random/path/. The install_runtime -# makefile target installs a few symbolic links based on PREFIX, not -# DEVEL_PREFIX. -# -# DEVEL_PREFIX is the directory where the development environment will -# be installed. The uClibc header files are installed into -# $(DEVEL_PREFIX)/include, static libraries are installed into -# $(DEVEL_PREFIX)/lib, etc. This directory is compiled into the uclibc -# cross compiler spoofer. Generally, DEVEL_PREFIX should be set to -# the same thing as $(PREFIX). DEVEL_PREFIX is used by the Makefile install -# targets install_gcc, install_dev, and install_runtime. + + +# Enable support for shared libraries? If this is false, you can +# ignore all the rest of the options in this file... +HAVE_SHARED = false + +# uClibc has a native shared library loader for some architectures. +BUILD_UCLIBC_LDSO=false + +# If you are using shared libraries, but do not want/have a native +# uClibc shared library loader, please specify the name of your +# system's shared library loader here... +#SYSTEM_LDSO=/lib/ld-linux.so.2 + +# When using shared libraries, this path is the location where the +# shared library will be invoked. This value will be compiled into +# every binary compiled with uClibc. # -# TARGET_PREFIX is the directory into which the target runtime -# environment is installed. The target runtime environment is what one -# would use for a embedded system where uclibc is the native libaray. -# This will typically be a staging area for creating a root filesystem -# for the target system, so the default is in the local directory. -# -# If you want to install to a temporary directory before copying files -# to their final location, define DESTDIR during the install step, -# i.e., 'make install DESTDIR=/home/foo/uclibc/_install'. -PREFIX = /opt/uClinux -DEVEL_PREFIX = $(PREFIX)/$(TARGET_ARCH)-elf -TARGET_PREFIX = $(TOPDIR)/_install +# BIG FAT WARNING: +# If you do not have a shared library loader with the correct name +# sitting in the directory this points to, your binaries will not run. +#SHARED_LIB_LOADER_PATH=$(DEVEL_PREFIX)/lib + +# DEVEL_PREFIX is the directory into which the uClibc development +# environment will be installed. The result will look something +# like the following: +# DEVEL_PREFIX/ +# bin/ <contains gcc, ld, etc> +# lib/ <contains all runtime and static libs> +# include/ <Where all the header files go> +# This value is used by the 'make install' Makefile target. Since this +# directory is compiled into the uclibc cross compiler spoofer, you +# have to recompile if you change this value... +DEVEL_PREFIX = /opt/uClinux/$(TARGET_ARCH)-elf + +# SYSTEM_DEVEL_PREFIX is the directory prefix used when installing +# usr/bin/arch-uclibc-gcc, usr/bin/arch-uclibc-ld, etc. This is only +# used by the 'make install' target, and is not compiled into anything. +# This defaults to $DEVEL_PREFIX, but makers of .rpms and .debs will +# want to set this to "/" instead. +SYSTEM_DEVEL_PREFIX = / + +# If you want 'make install' to install everything under a temporary +# directory, the define PREFIX during the install step, +# i.e., 'make PREFIX=/var/tmp/uClibc install'. +#PREFIX = $(TOPDIR)/_install +PREFIX = diff --git a/extra/Configs/Config.i386 b/extra/Configs/Config.i386 index 7eb9a0095..33ce45a4e 100644 --- a/extra/Configs/Config.i386 +++ b/extra/Configs/Config.i386 @@ -35,7 +35,7 @@ TARGET_ARCH=i386 # If you are running a cross compiler, you may want to set this # to something more interesting... NATIVE_CC = gcc -CROSS = #i386-linux- +CROSS = #$(TARGET_ARCH)-linux- CC = $(CROSS)gcc AR = $(CROSS)ar LD = $(CROSS)ld @@ -45,14 +45,11 @@ STRIPTOOL = $(CROSS)strip # Set the following to `true' to make a debuggable build, and `false' for # production builds. -DODEBUG = true +DODEBUG = false # Compiler warnings you want to see WARNINGS=-Wall -# Enable support for shared libraries? -HAVE_SHARED = true - # Note that the kernel source you use to compile with should be the same as the # Linux kernel you run your apps on. uClibc doesn't even try to achieve binary # compatibility across kernel versions. So don't expect, for example, uClibc @@ -139,30 +136,51 @@ INCLUDE_IPV6 = false # If you want to compile the library as PIC code, turn this on. DOPIC = false -# PREFIX is the directory prefix that is applied to all installed -# files. Typically, it is set to /usr or /usr/local, although it could -# also be /opt/vendor_name_here/some/random/path/. The install_runtime -# makefile target installs a few symbolic links based on PREFIX, not -# DEVEL_PREFIX. -# -# DEVEL_PREFIX is the directory where the development environment will -# be installed. The uClibc header files are installed into -# $(DEVEL_PREFIX)/include, static libraries are installed into -# $(DEVEL_PREFIX)/lib, etc. This directory is compiled into the uclibc -# cross compiler spoofer. Generally, DEVEL_PREFIX should be set to -# the same thing as $(PREFIX). DEVEL_PREFIX is used by the Makefile install -# targets install_gcc, install_dev, and install_runtime. + + +# Enable support for shared libraries? If this is false, you can +# ignore all the rest of the options in this file... +HAVE_SHARED = true + +# uClibc has a native shared library loader for some architectures. +BUILD_UCLIBC_LDSO=true + +# If you are using shared libraries, but do not want/have a native +# uClibc shared library loader, please specify the name of your +# system's shared library loader here... +#SYSTEM_LDSO=/lib/ld-linux.so.2 + +# When using shared libraries, this path is the location where the +# shared library will be invoked. This value will be compiled into +# every binary compiled with uClibc. # -# TARGET_PREFIX is the directory into which the target runtime -# environment is installed. The target runtime environment is what one -# would use for a embedded system where uclibc is the native libaray. -# This will typically be a staging area for creating a root filesystem -# for the target system, so the default is in the local directory. -# -# If you want to install to a temporary directory before copying files -# to their final location, define DESTDIR during the install step, -# i.e., 'make install DESTDIR=/home/foo/uclibc/_install'. -PREFIX = /usr/$(TARGET_ARCH)-linux-uclibc -DEVEL_PREFIX = $(PREFIX) -TARGET_PREFIX = / +# BIG FAT WARNING: +# If you do not have a shared library loader with the correct name +# sitting in the directory this points to, your binaries will not run. +SHARED_LIB_LOADER_PATH=$(DEVEL_PREFIX)/lib + +# DEVEL_PREFIX is the directory into which the uClibc development +# environment will be installed. The result will look something +# like the following: +# DEVEL_PREFIX/ +# bin/ <contains gcc, ld, etc> +# lib/ <contains all runtime and static libs> +# include/ <Where all the header files go> +# This value is used by the 'make install' Makefile target. Since this +# directory is compiled into the uclibc cross compiler spoofer, you +# have to recompile if you change this value... +DEVEL_PREFIX = /usr/$(TARGET_ARCH)-linux-uclibc + +# SYSTEM_DEVEL_PREFIX is the directory prefix used when installing +# usr/bin/arch-uclibc-gcc, usr/bin/arch-uclibc-ld, etc. This is only +# used by the 'make install' target, and is not compiled into anything. +# This defaults to $DEVEL_PREFIX, but makers of .rpms and .debs will +# want to set this to "/" instead. +SYSTEM_DEVEL_PREFIX = $(DEVEL_PREFIX) + +# If you want 'make install' to install everything under a temporary +# directory, the define PREFIX during the install step, +# i.e., 'make PREFIX=/var/tmp/uClibc install'. +#PREFIX = $(TOPDIR)/_install +PREFIX = diff --git a/extra/Configs/Config.m68k b/extra/Configs/Config.m68k index b9447b844..3168eb366 100644 --- a/extra/Configs/Config.m68k +++ b/extra/Configs/Config.m68k @@ -50,9 +50,6 @@ DODEBUG = false # Compiler warnings you want to see WARNINGS=-Wall -# Enable support for shared libraries? -HAVE_SHARED = false - # Note that the kernel source you use to compile with should be the same as the # Linux kernel you run your apps on. uClibc doesn't even try to achieve binary # compatibility across kernel versions. So don't expect, for example, uClibc @@ -153,30 +150,50 @@ ARCH_CFLAGS2 = -I$(KERNEL_SOURCE)/include OPTIMIZATION = $(DEBUG_CFLAGS) -# PREFIX is the directory prefix that is applied to all installed -# files. Typically, it is set to /usr or /usr/local, although it could -# also be /opt/vendor_name_here/some/random/path/. The install_runtime -# makefile target installs a few symbolic links based on PREFIX, not -# DEVEL_PREFIX. -# -# DEVEL_PREFIX is the directory where the development environment will -# be installed. The uClibc header files are installed into -# $(DEVEL_PREFIX)/include, static libraries are installed into -# $(DEVEL_PREFIX)/lib, etc. This directory is compiled into the uclibc -# cross compiler spoofer. Generally, DEVEL_PREFIX should be set to -# the same thing as $(PREFIX). DEVEL_PREFIX is used by the Makefile install -# targets install_gcc, install_dev, and install_runtime. + +# Enable support for shared libraries? If this is false, you can +# ignore all the rest of the options in this file... +HAVE_SHARED = false + +# uClibc has a native shared library loader for some architectures. +BUILD_UCLIBC_LDSO=false + +# If you are using shared libraries, but do not want/have a native +# uClibc shared library loader, please specify the name of your +# system's shared library loader here... +#SYSTEM_LDSO=/lib/ld-linux.so.2 + +# When using shared libraries, this path is the location where the +# shared library will be invoked. This value will be compiled into +# every binary compiled with uClibc. # -# TARGET_PREFIX is the directory into which the target runtime -# environment is installed. The target runtime environment is what one -# would use for a embedded system where uclibc is the native libaray. -# This will typically be a staging area for creating a root filesystem -# for the target system, so the default is in the local directory. -# -# If you want to install to a temporary directory before copying files -# to their final location, define DESTDIR during the install step, -# i.e., 'make install DESTDIR=/home/foo/uclibc/_install'. -PREFIX = /opt/uClinux -DEVEL_PREFIX = $(PREFIX)/$(TARGET_ARCH)-elf -TARGET_PREFIX = $(TOPDIR)/_install +# BIG FAT WARNING: +# If you do not have a shared library loader with the correct name +# sitting in the directory this points to, your binaries will not run. +#SHARED_LIB_LOADER_PATH=$(DEVEL_PREFIX)/lib + +# DEVEL_PREFIX is the directory into which the uClibc development +# environment will be installed. The result will look something +# like the following: +# DEVEL_PREFIX/ +# bin/ <contains gcc, ld, etc> +# lib/ <contains all runtime and static libs> +# include/ <Where all the header files go> +# This value is used by the 'make install' Makefile target. Since this +# directory is compiled into the uclibc cross compiler spoofer, you +# have to recompile if you change this value... +DEVEL_PREFIX = /opt/uClinux/$(TARGET_ARCH)-elf + +# SYSTEM_DEVEL_PREFIX is the directory prefix used when installing +# usr/bin/arch-uclibc-gcc, usr/bin/arch-uclibc-ld, etc. This is only +# used by the 'make install' target, and is not compiled into anything. +# This defaults to $DEVEL_PREFIX, but makers of .rpms and .debs will +# want to set this to "/" instead. +SYSTEM_DEVEL_PREFIX = / + +# If you want 'make install' to install everything under a temporary +# directory, the define PREFIX during the install step, +# i.e., 'make PREFIX=/var/tmp/uClibc install'. +#PREFIX = $(TOPDIR)/_install +PREFIX = diff --git a/extra/Configs/Config.m68k.coff b/extra/Configs/Config.m68k.coff index 541089407..8ae49475f 100644 --- a/extra/Configs/Config.m68k.coff +++ b/extra/Configs/Config.m68k.coff @@ -50,9 +50,6 @@ DODEBUG = false # Compiler warnings you want to see WARNINGS=-Wall -# Enable support for shared libraries? -HAVE_SHARED = false - # Note that the kernel source you use to compile with should be the same as the # Linux kernel you run your apps on. uClibc doesn't even try to achieve binary # compatibility across kernel versions. So don't expect, for example, uClibc @@ -155,30 +152,51 @@ OPTIMIZATION = $(DEBUG_CFLAGS) # This is a COFF compiler (ick), so disable all the cool stuff HAVE_ELF = false -# PREFIX is the directory prefix that is applied to all installed -# files. Typically, it is set to /usr or /usr/local, although it could -# also be /opt/vendor_name_here/some/random/path/. The install_runtime -# makefile target installs a few symbolic links based on PREFIX, not -# DEVEL_PREFIX. -# -# DEVEL_PREFIX is the directory where the development environment will -# be installed. The uClibc header files are installed into -# $(DEVEL_PREFIX)/include, static libraries are installed into -# $(DEVEL_PREFIX)/lib, etc. This directory is compiled into the uclibc -# cross compiler spoofer. Generally, DEVEL_PREFIX should be set to -# the same thing as $(PREFIX). DEVEL_PREFIX is used by the Makefile install -# targets install_gcc, install_dev, and install_runtime. + + +# Enable support for shared libraries? If this is false, you can +# ignore all the rest of the options in this file... +HAVE_SHARED = false + +# uClibc has a native shared library loader for some architectures. +BUILD_UCLIBC_LDSO=false + +# If you are using shared libraries, but do not want/have a native +# uClibc shared library loader, please specify the name of your +# system's shared library loader here... +#SYSTEM_LDSO=/lib/ld-linux.so.2 + +# When using shared libraries, this path is the location where the +# shared library will be invoked. This value will be compiled into +# every binary compiled with uClibc. # -# TARGET_PREFIX is the directory into which the target runtime -# environment is installed. The target runtime environment is what one -# would use for a embedded system where uclibc is the native libaray. -# This will typically be a staging area for creating a root filesystem -# for the target system, so the default is in the local directory. -# -# If you want to install to a temporary directory before copying files -# to their final location, define DESTDIR during the install step, -# i.e., 'make install DESTDIR=/home/foo/uclibc/_install'. -PREFIX = /opt/uClinux -DEVEL_PREFIX = $(PREFIX)/$(TARGET_ARCH)-coff -TARGET_PREFIX = $(TOPDIR)/_install +# BIG FAT WARNING: +# If you do not have a shared library loader with the correct name +# sitting in the directory this points to, your binaries will not run. +#SHARED_LIB_LOADER_PATH=$(DEVEL_PREFIX)/lib + +# DEVEL_PREFIX is the directory into which the uClibc development +# environment will be installed. The result will look something +# like the following: +# DEVEL_PREFIX/ +# bin/ <contains gcc, ld, etc> +# lib/ <contains all runtime and static libs> +# include/ <Where all the header files go> +# This value is used by the 'make install' Makefile target. Since this +# directory is compiled into the uclibc cross compiler spoofer, you +# have to recompile if you change this value... +DEVEL_PREFIX = /opt/uClinux/$(TARGET_ARCH)-coff + +# SYSTEM_DEVEL_PREFIX is the directory prefix used when installing +# usr/bin/arch-uclibc-gcc, usr/bin/arch-uclibc-ld, etc. This is only +# used by the 'make install' target, and is not compiled into anything. +# This defaults to $DEVEL_PREFIX, but makers of .rpms and .debs will +# want to set this to "/" instead. +SYSTEM_DEVEL_PREFIX = / + +# If you want 'make install' to install everything under a temporary +# directory, the define PREFIX during the install step, +# i.e., 'make PREFIX=/var/tmp/uClibc install'. +#PREFIX = $(TOPDIR)/_install +PREFIX = diff --git a/extra/Configs/Config.mips b/extra/Configs/Config.mips index 4f8a38c7f..8e3b4ce36 100644 --- a/extra/Configs/Config.mips +++ b/extra/Configs/Config.mips @@ -50,9 +50,6 @@ DODEBUG = false # Compiler warnings you want to see WARNINGS=-Wall -# Enable support for shared libraries? -HAVE_SHARED = false - # Note that the kernel source you use to compile with should be the same as the # Linux kernel you run your apps on. uClibc doesn't even try to achieve binary # compatibility across kernel versions. So don't expect, for example, uClibc @@ -111,8 +108,8 @@ LOCALE_DIR = "/usr/share/uClibc-locale/" # "malloc-930716" is from libc-5.3.12 and was/is the standard gnu malloc. # It is actually smaller than "malloc", at least on i386. Right now, it # only works on i386 (and maybe m68k) because it needs sbrk. -#MALLOC = malloc-simple -MALLOC = malloc +MALLOC = malloc-simple +#MALLOC = malloc #MALLOC = malloc-930716 # If you want to collect common syscall code into one function, set to this to @@ -139,30 +136,51 @@ INCLUDE_IPV6 = false # If you want to compile the library as PIC code, turn this on. DOPIC = false -# PREFIX is the directory prefix that is applied to all installed -# files. Typically, it is set to /usr or /usr/local, although it could -# also be /opt/vendor_name_here/some/random/path/. The install_runtime -# makefile target installs a few symbolic links based on PREFIX, not -# DEVEL_PREFIX. -# -# DEVEL_PREFIX is the directory where the development environment will -# be installed. The uClibc header files are installed into -# $(DEVEL_PREFIX)/include, static libraries are installed into -# $(DEVEL_PREFIX)/lib, etc. This directory is compiled into the uclibc -# cross compiler spoofer. Generally, DEVEL_PREFIX should be set to -# the same thing as $(PREFIX). DEVEL_PREFIX is used by the Makefile install -# targets install_gcc, install_dev, and install_runtime. + + +# Enable support for shared libraries? If this is false, you can +# ignore all the rest of the options in this file... +HAVE_SHARED = false + +# uClibc has a native shared library loader for some architectures. +BUILD_UCLIBC_LDSO=false + +# If you are using shared libraries, but do not want/have a native +# uClibc shared library loader, please specify the name of your +# system's shared library loader here... +#SYSTEM_LDSO=/lib/ld-linux.so.2 + +# When using shared libraries, this path is the location where the +# shared library will be invoked. This value will be compiled into +# every binary compiled with uClibc. # -# TARGET_PREFIX is the directory into which the target runtime -# environment is installed. The target runtime environment is what one -# would use for a embedded system where uclibc is the native libaray. -# This will typically be a staging area for creating a root filesystem -# for the target system, so the default is in the local directory. -# -# If you want to install to a temporary directory before copying files -# to their final location, define DESTDIR during the install step, -# i.e., 'make install DESTDIR=/home/foo/uclibc/_install'. -PREFIX = /usr/$(TARGET_ARCH)-linux-uclibc -DEVEL_PREFIX = $(PREFIX) -TARGET_PREFIX = / +# BIG FAT WARNING: +# If you do not have a shared library loader with the correct name +# sitting in the directory this points to, your binaries will not run. +#SHARED_LIB_LOADER_PATH=$(DEVEL_PREFIX)/lib + +# DEVEL_PREFIX is the directory into which the uClibc development +# environment will be installed. The result will look something +# like the following: +# DEVEL_PREFIX/ +# bin/ <contains gcc, ld, etc> +# lib/ <contains all runtime and static libs> +# include/ <Where all the header files go> +# This value is used by the 'make install' Makefile target. Since this +# directory is compiled into the uclibc cross compiler spoofer, you +# have to recompile if you change this value... +DEVEL_PREFIX = /usr/$(TARGET_ARCH)-linux-uclibc + +# SYSTEM_DEVEL_PREFIX is the directory prefix used when installing +# usr/bin/arch-uclibc-gcc, usr/bin/arch-uclibc-ld, etc. This is only +# used by the 'make install' target, and is not compiled into anything. +# This defaults to $DEVEL_PREFIX, but makers of .rpms and .debs will +# want to set this to "/" instead. +SYSTEM_DEVEL_PREFIX = $(DEVEL_PREFIX) + +# If you want 'make install' to install everything under a temporary +# directory, the define PREFIX during the install step, +# i.e., 'make PREFIX=/var/tmp/uClibc install'. +#PREFIX = $(TOPDIR)/_install +PREFIX = diff --git a/extra/Configs/Config.mipsel b/extra/Configs/Config.mipsel index 4f8a38c7f..8e3b4ce36 100644 --- a/extra/Configs/Config.mipsel +++ b/extra/Configs/Config.mipsel @@ -50,9 +50,6 @@ DODEBUG = false # Compiler warnings you want to see WARNINGS=-Wall -# Enable support for shared libraries? -HAVE_SHARED = false - # Note that the kernel source you use to compile with should be the same as the # Linux kernel you run your apps on. uClibc doesn't even try to achieve binary # compatibility across kernel versions. So don't expect, for example, uClibc @@ -111,8 +108,8 @@ LOCALE_DIR = "/usr/share/uClibc-locale/" # "malloc-930716" is from libc-5.3.12 and was/is the standard gnu malloc. # It is actually smaller than "malloc", at least on i386. Right now, it # only works on i386 (and maybe m68k) because it needs sbrk. -#MALLOC = malloc-simple -MALLOC = malloc +MALLOC = malloc-simple +#MALLOC = malloc #MALLOC = malloc-930716 # If you want to collect common syscall code into one function, set to this to @@ -139,30 +136,51 @@ INCLUDE_IPV6 = false # If you want to compile the library as PIC code, turn this on. DOPIC = false -# PREFIX is the directory prefix that is applied to all installed -# files. Typically, it is set to /usr or /usr/local, although it could -# also be /opt/vendor_name_here/some/random/path/. The install_runtime -# makefile target installs a few symbolic links based on PREFIX, not -# DEVEL_PREFIX. -# -# DEVEL_PREFIX is the directory where the development environment will -# be installed. The uClibc header files are installed into -# $(DEVEL_PREFIX)/include, static libraries are installed into -# $(DEVEL_PREFIX)/lib, etc. This directory is compiled into the uclibc -# cross compiler spoofer. Generally, DEVEL_PREFIX should be set to -# the same thing as $(PREFIX). DEVEL_PREFIX is used by the Makefile install -# targets install_gcc, install_dev, and install_runtime. + + +# Enable support for shared libraries? If this is false, you can +# ignore all the rest of the options in this file... +HAVE_SHARED = false + +# uClibc has a native shared library loader for some architectures. +BUILD_UCLIBC_LDSO=false + +# If you are using shared libraries, but do not want/have a native +# uClibc shared library loader, please specify the name of your +# system's shared library loader here... +#SYSTEM_LDSO=/lib/ld-linux.so.2 + +# When using shared libraries, this path is the location where the +# shared library will be invoked. This value will be compiled into +# every binary compiled with uClibc. # -# TARGET_PREFIX is the directory into which the target runtime -# environment is installed. The target runtime environment is what one -# would use for a embedded system where uclibc is the native libaray. -# This will typically be a staging area for creating a root filesystem -# for the target system, so the default is in the local directory. -# -# If you want to install to a temporary directory before copying files -# to their final location, define DESTDIR during the install step, -# i.e., 'make install DESTDIR=/home/foo/uclibc/_install'. -PREFIX = /usr/$(TARGET_ARCH)-linux-uclibc -DEVEL_PREFIX = $(PREFIX) -TARGET_PREFIX = / +# BIG FAT WARNING: +# If you do not have a shared library loader with the correct name +# sitting in the directory this points to, your binaries will not run. +#SHARED_LIB_LOADER_PATH=$(DEVEL_PREFIX)/lib + +# DEVEL_PREFIX is the directory into which the uClibc development +# environment will be installed. The result will look something +# like the following: +# DEVEL_PREFIX/ +# bin/ <contains gcc, ld, etc> +# lib/ <contains all runtime and static libs> +# include/ <Where all the header files go> +# This value is used by the 'make install' Makefile target. Since this +# directory is compiled into the uclibc cross compiler spoofer, you +# have to recompile if you change this value... +DEVEL_PREFIX = /usr/$(TARGET_ARCH)-linux-uclibc + +# SYSTEM_DEVEL_PREFIX is the directory prefix used when installing +# usr/bin/arch-uclibc-gcc, usr/bin/arch-uclibc-ld, etc. This is only +# used by the 'make install' target, and is not compiled into anything. +# This defaults to $DEVEL_PREFIX, but makers of .rpms and .debs will +# want to set this to "/" instead. +SYSTEM_DEVEL_PREFIX = $(DEVEL_PREFIX) + +# If you want 'make install' to install everything under a temporary +# directory, the define PREFIX during the install step, +# i.e., 'make PREFIX=/var/tmp/uClibc install'. +#PREFIX = $(TOPDIR)/_install +PREFIX = diff --git a/extra/Configs/Config.powerpc b/extra/Configs/Config.powerpc index 2e2aa692e..c36b82703 100644 --- a/extra/Configs/Config.powerpc +++ b/extra/Configs/Config.powerpc @@ -50,9 +50,6 @@ DODEBUG = false # Compiler warnings you want to see WARNINGS=-Wall -# Enable support for shared libraries? -HAVE_SHARED = true - # Note that the kernel source you use to compile with should be the same as the # Linux kernel you run your apps on. uClibc doesn't even try to achieve binary # compatibility across kernel versions. So don't expect, for example, uClibc @@ -112,8 +109,8 @@ LOCALE_DIR = "/usr/share/uClibc-locale/" # It is actually smaller than "malloc", at least on i386. Right now, it # only works on i386 (and maybe m68k) because it needs sbrk. #MALLOC = malloc-simple -MALLOC = malloc -#MALLOC = malloc-930716 +#MALLOC = malloc +MALLOC = malloc-930716 # If you want to collect common syscall code into one function, set to this to # `true'. Set it to false otherwise. @@ -139,30 +136,54 @@ INCLUDE_IPV6 = false # If you want to compile the library as PIC code, turn this on. DOPIC = false -# PREFIX is the directory prefix that is applied to all installed -# files. Typically, it is set to /usr or /usr/local, although it could -# also be /opt/vendor_name_here/some/random/path/. The install_runtime -# makefile target installs a few symbolic links based on PREFIX, not -# DEVEL_PREFIX. -# -# DEVEL_PREFIX is the directory where the development environment will -# be installed. The uClibc header files are installed into -# $(DEVEL_PREFIX)/include, static libraries are installed into -# $(DEVEL_PREFIX)/lib, etc. This directory is compiled into the uclibc -# cross compiler spoofer. Generally, DEVEL_PREFIX should be set to -# the same thing as $(PREFIX). DEVEL_PREFIX is used by the Makefile install -# targets install_gcc, install_dev, and install_runtime. + + +# Enable support for shared libraries? If this is false, you can +# ignore all the rest of the options in this file... +HAVE_SHARED = true + +# uClibc has a native shared library loader for some architectures. +BUILD_UCLIBC_LDSO=false + +# If you are using shared libraries, but do not want/have a native +# uClibc shared library loader, please specify the name of your +# system's shared library loader here... +#SYSTEM_LDSO=/lib/ld-linux.so.2 +SYSTEM_LDSO=$(shell for each in `$(CC) -print-search-dirs| \ + grep ^libraries| sed -e 's/^libraries: //' -e 's/:/ /g'`;\ + do ls $$each/ld.so.* 2>/dev/null;done) + +# When using shared libraries, this path is the location where the +# shared library will be invoked. This value will be compiled into +# every binary compiled with uClibc. # -# TARGET_PREFIX is the directory into which the target runtime -# environment is installed. The target runtime environment is what one -# would use for a embedded system where uclibc is the native libaray. -# This will typically be a staging area for creating a root filesystem -# for the target system, so the default is in the local directory. -# -# If you want to install to a temporary directory before copying files -# to their final location, define DESTDIR during the install step, -# i.e., 'make install DESTDIR=/home/foo/uclibc/_install'. -PREFIX = /usr/$(TARGET_ARCH)-linux-uclibc -DEVEL_PREFIX = $(PREFIX) -TARGET_PREFIX = $(TOPDIR)/_install +# BIG FAT WARNING: +# If you do not have a shared library loader with the correct name +# sitting in the directory this points to, your binaries will not run. +SHARED_LIB_LOADER_PATH=$(DEVEL_PREFIX)/lib + +# DEVEL_PREFIX is the directory into which the uClibc development +# environment will be installed. The result will look something +# like the following: +# DEVEL_PREFIX/ +# bin/ <contains gcc, ld, etc> +# lib/ <contains all runtime and static libs> +# include/ <Where all the header files go> +# This value is used by the 'make install' Makefile target. Since this +# directory is compiled into the uclibc cross compiler spoofer, you +# have to recompile if you change this value... +DEVEL_PREFIX = /usr/$(TARGET_ARCH)-linux-uclibc + +# SYSTEM_DEVEL_PREFIX is the directory prefix used when installing +# usr/bin/arch-uclibc-gcc, usr/bin/arch-uclibc-ld, etc. This is only +# used by the 'make install' target, and is not compiled into anything. +# This defaults to $DEVEL_PREFIX, but makers of .rpms and .debs will +# want to set this to "/" instead. +SYSTEM_DEVEL_PREFIX = $(DEVEL_PREFIX) + +# If you want 'make install' to install everything under a temporary +# directory, the define PREFIX during the install step, +# i.e., 'make PREFIX=/var/tmp/uClibc install'. +#PREFIX = $(TOPDIR)/_install +PREFIX = diff --git a/extra/Configs/Config.sh b/extra/Configs/Config.sh index dc8cb0c35..e0dfb9e8f 100644 --- a/extra/Configs/Config.sh +++ b/extra/Configs/Config.sh @@ -51,9 +51,6 @@ DODEBUG = false # Compiler warnings you want to see WARNINGS=-Wall -# Enable support for shared libraries? -HAVE_SHARED = false - # Note that the kernel source you use to compile with should be the same as the # Linux kernel you run your apps on. uClibc doesn't even try to achieve binary # compatibility across kernel versions. So don't expect, for example, uClibc @@ -160,30 +157,52 @@ INCLUDE_IPV6 = false # If you want to compile the library as PIC code, turn this on. DOPIC = false -# PREFIX is the directory prefix that is applied to all installed -# files. Typically, it is set to /usr or /usr/local, although it could -# also be /opt/vendor_name_here/some/random/path/. The install_runtime -# makefile target installs a few symbolic links based on PREFIX, not -# DEVEL_PREFIX. -# -# DEVEL_PREFIX is the directory where the development environment will -# be installed. The uClibc header files are installed into -# $(DEVEL_PREFIX)/include, static libraries are installed into -# $(DEVEL_PREFIX)/lib, etc. This directory is compiled into the uclibc -# cross compiler spoofer. Generally, DEVEL_PREFIX should be set to -# the same thing as $(PREFIX). DEVEL_PREFIX is used by the Makefile install -# targets install_gcc, install_dev, and install_runtime. + + +# Enable support for shared libraries? If this is false, you can +# ignore all the rest of the options in this file... +HAVE_SHARED = false + +# uClibc has a native shared library loader for some architectures. +BUILD_UCLIBC_LDSO=false + +# If you are using shared libraries, but do not want/have a native +# uClibc shared library loader, please specify the name of your +# system's shared library loader here... +#SYSTEM_LDSO=/lib/ld-linux.so.2 + +# When using shared libraries, this path is the location where the +# shared library will be invoked. This value will be compiled into +# every binary compiled with uClibc. # -# TARGET_PREFIX is the directory into which the target runtime -# environment is installed. The target runtime environment is what one -# would use for a embedded system where uclibc is the native libaray. -# This will typically be a staging area for creating a root filesystem -# for the target system, so the default is in the local directory. -# -# If you want to install to a temporary directory before copying files -# to their final location, define DESTDIR during the install step, -# i.e., 'make install DESTDIR=/home/foo/uclibc/_install'. -PREFIX = /opt/uClinux -DEVEL_PREFIX = $(PREFIX)/$(TARGET_ARCH)-elf -TARGET_PREFIX = $(TOPDIR)/_install +# BIG FAT WARNING: +# If you do not have a shared library loader with the correct name +# sitting in the directory this points to, your binaries will not run. +#SHARED_LIB_LOADER_PATH=$(DEVEL_PREFIX)/lib + +# DEVEL_PREFIX is the directory into which the uClibc development +# environment will be installed. The result will look something +# like the following: +# DEVEL_PREFIX/ +# bin/ <contains gcc, ld, etc> +# lib/ <contains all runtime and static libs> +# include/ <Where all the header files go> +# This value is used by the 'make install' Makefile target. Since this +# directory is compiled into the uclibc cross compiler spoofer, you +# have to recompile if you change this value... +DEVEL_PREFIX = /opt/uClinux/$(TARGET_ARCH)-elf + +# SYSTEM_DEVEL_PREFIX is the directory prefix used when installing +# usr/bin/arch-uclibc-gcc, usr/bin/arch-uclibc-ld, etc. This is only +# used by the 'make install' target, and is not compiled into anything. +# This defaults to $DEVEL_PREFIX, but makers of .rpms and .debs will +# want to set this to "/" instead. +SYSTEM_DEVEL_PREFIX = / + +# If you want 'make install' to install everything under a temporary +# directory, the define PREFIX during the install step, +# i.e., 'make PREFIX=/var/tmp/uClibc install'. +#PREFIX = $(TOPDIR)/_install +PREFIX = + |