diff options
Diffstat (limited to 'extra/Configs')
| -rw-r--r-- | extra/Configs/Config.alpha | 18 | ||||
| -rw-r--r-- | extra/Configs/Config.arm | 16 | ||||
| -rw-r--r-- | extra/Configs/Config.cross.arm.uclinux | 18 | ||||
| -rw-r--r-- | extra/Configs/Config.h8300 | 18 | ||||
| -rw-r--r-- | extra/Configs/Config.i386 | 16 | ||||
| -rw-r--r-- | extra/Configs/Config.i960 | 16 | ||||
| -rw-r--r-- | extra/Configs/Config.m68k | 18 | ||||
| -rw-r--r-- | extra/Configs/Config.m68k.coff | 18 | ||||
| -rw-r--r-- | extra/Configs/Config.mips | 16 | ||||
| -rw-r--r-- | extra/Configs/Config.mipsel | 16 | ||||
| -rw-r--r-- | extra/Configs/Config.powerpc | 16 | ||||
| -rw-r--r-- | extra/Configs/Config.sh | 18 | ||||
| -rw-r--r-- | extra/Configs/Config.sparc | 16 | ||||
| -rw-r--r-- | extra/Configs/Config.v850e | 16 |
14 files changed, 104 insertions, 132 deletions
diff --git a/extra/Configs/Config.alpha b/extra/Configs/Config.alpha index f8cc9ddbc..d5160c1fa 100644 --- a/extra/Configs/Config.alpha +++ b/extra/Configs/Config.alpha @@ -86,19 +86,17 @@ HAS_LOCALE = false HAS_WCHAR = false # This specifies which malloc implementation is used. -# "malloc-simple" is very, very small, but is also very, very dumb -# and does not try to make good use of memory or clean up after itself. # -# "malloc" on the other hand is a bit bigger, but is pretty smart thereby -# minimizing memory wastage and reusing already allocated memory. This -# can be lots faster and safer IMHO. +# "malloc" use mmap for all allocations and so works very well on MMU-less +# systems that do not support the brk() system call. It is pretty smart +# about reusing already allocated memory, and minimizing memory wastage. # -# "malloc-930716" is from libc-5.3.12 and was/is the standard gnu malloc. -# It is actually smaller than "malloc", but because it is based on brk/sbrk -# it will only work on systems with an MMU. -MALLOC = malloc-simple +# "malloc-930716" is derived from libc-5.3.12 and uses the brk() system call +# for all memory allocations. This makes it very fast. It is also pretty +# smart about reusing already allocated memory, and minimizing memory wastage. +# Because this uses brk() it will not work on uClinux MMU-less systems. #MALLOC = malloc -#MALLOC = malloc-930716 +MALLOC = malloc-930716 # If you want to collect common syscall code into one function, set to this to # `true'. Set it to false otherwise. diff --git a/extra/Configs/Config.arm b/extra/Configs/Config.arm index 4d552624f..7c91b5fc6 100644 --- a/extra/Configs/Config.arm +++ b/extra/Configs/Config.arm @@ -90,17 +90,15 @@ HAS_LOCALE = false HAS_WCHAR = false # This specifies which malloc implementation is used. -# "malloc-simple" is very, very small, but is also very, very dumb -# and does not try to make good use of memory or clean up after itself. # -# "malloc" on the other hand is a bit bigger, but is pretty smart thereby -# minimizing memory wastage and reusing already allocated memory. This -# can be lots faster and safer IMHO. +# "malloc" use mmap for all allocations and so works very well on MMU-less +# systems that do not support the brk() system call. It is pretty smart +# about reusing already allocated memory, and minimizing memory wastage. # -# "malloc-930716" is from libc-5.3.12 and was/is the standard gnu malloc. -# It is actually smaller than "malloc", but because it is based on brk/sbrk -# it will only work on systems with an MMU. -#MALLOC = malloc-simple +# "malloc-930716" is derived from libc-5.3.12 and uses the brk() system call +# for all memory allocations. This makes it very fast. It is also pretty +# smart about reusing already allocated memory, and minimizing memory wastage. +# Because this uses brk() it will not work on uClinux MMU-less systems. #MALLOC = malloc MALLOC = malloc-930716 diff --git a/extra/Configs/Config.cross.arm.uclinux b/extra/Configs/Config.cross.arm.uclinux index a86931f0b..30a915f26 100644 --- a/extra/Configs/Config.cross.arm.uclinux +++ b/extra/Configs/Config.cross.arm.uclinux @@ -86,18 +86,16 @@ HAS_LOCALE = false HAS_WCHAR = false # This specifies which malloc implementation is used. -# "malloc-simple" is very, very small, but is also very, very dumb -# and does not try to make good use of memory or clean up after itself. # -# "malloc" on the other hand is a bit bigger, but is pretty smart thereby -# minimizing memory wastage and reusing already allocated memory. This -# can be lots faster and safer IMHO. +# "malloc" use mmap for all allocations and so works very well on MMU-less +# systems that do not support the brk() system call. It is pretty smart +# about reusing already allocated memory, and minimizing memory wastage. # -# "malloc-930716" is from libc-5.3.12 and was/is the standard gnu malloc. -# It is actually smaller than "malloc", but because it is based on brk/sbrk -# it will only work on systems with an MMU. -MALLOC = malloc-simple -#MALLOC = malloc +# "malloc-930716" is derived from libc-5.3.12 and uses the brk() system call +# for all memory allocations. This makes it very fast. It is also pretty +# smart about reusing already allocated memory, and minimizing memory wastage. +# Because this uses brk() it will not work on uClinux MMU-less systems. +MALLOC = malloc #MALLOC = malloc-930716 # Having brk allows one to use malloc-930716, which is an order diff --git a/extra/Configs/Config.h8300 b/extra/Configs/Config.h8300 index 8f29b8bd8..716c19d57 100644 --- a/extra/Configs/Config.h8300 +++ b/extra/Configs/Config.h8300 @@ -89,18 +89,16 @@ HAS_LOCALE = false HAS_WCHAR = false # This specifies which malloc implementation is used. -# "malloc-simple" is very, very small, but is also very, very dumb -# and does not try to make good use of memory or clean up after itself. # -# "malloc" on the other hand is a bit bigger, but is pretty smart thereby -# minimizing memory wastage and reusing already allocated memory. This -# can be lots faster and safer IMHO. +# "malloc" use mmap for all allocations and so works very well on MMU-less +# systems that do not support the brk() system call. It is pretty smart +# about reusing already allocated memory, and minimizing memory wastage. # -# "malloc-930716" is from libc-5.3.12 and was/is the standard gnu malloc. -# It is actually smaller than "malloc", but because it is based on brk/sbrk -# it will only work on systems with an MMU. -MALLOC = malloc-simple -#MALLOC = malloc +# "malloc-930716" is derived from libc-5.3.12 and uses the brk() system call +# for all memory allocations. This makes it very fast. It is also pretty +# smart about reusing already allocated memory, and minimizing memory wastage. +# Because this uses brk() it will not work on uClinux MMU-less systems. +MALLOC = malloc #MALLOC = malloc-930716 # If you want to collect common syscall code into one function, set to this to diff --git a/extra/Configs/Config.i386 b/extra/Configs/Config.i386 index 706a34223..0125417e7 100644 --- a/extra/Configs/Config.i386 +++ b/extra/Configs/Config.i386 @@ -86,17 +86,15 @@ HAS_LOCALE = false HAS_WCHAR = false # This specifies which malloc implementation is used. -# "malloc-simple" is very, very small, but is also very, very dumb -# and does not try to make good use of memory or clean up after itself. # -# "malloc" on the other hand is a bit bigger, but is pretty smart thereby -# minimizing memory wastage and reusing already allocated memory. This -# can be lots faster and safer IMHO. +# "malloc" use mmap for all allocations and so works very well on MMU-less +# systems that do not support the brk() system call. It is pretty smart +# about reusing already allocated memory, and minimizing memory wastage. # -# "malloc-930716" is from libc-5.3.12 and was/is the standard gnu malloc. -# It is actually smaller than "malloc", but because it is based on brk/sbrk -# it will only work on systems with an MMU. -#MALLOC = malloc-simple +# "malloc-930716" is derived from libc-5.3.12 and uses the brk() system call +# for all memory allocations. This makes it very fast. It is also pretty +# smart about reusing already allocated memory, and minimizing memory wastage. +# Because this uses brk() it will not work on uClinux MMU-less systems. #MALLOC = malloc MALLOC = malloc-930716 diff --git a/extra/Configs/Config.i960 b/extra/Configs/Config.i960 index 65d563b7f..0c073e9e8 100644 --- a/extra/Configs/Config.i960 +++ b/extra/Configs/Config.i960 @@ -86,17 +86,15 @@ HAS_LOCALE = false HAS_WCHAR = false # This specifies which malloc implementation is used. -# "malloc-simple" is very, very small, but is also very, very dumb -# and does not try to make good use of memory or clean up after itself. # -# "malloc" on the other hand is a bit bigger, but is pretty smart thereby -# minimizing memory wastage and reusing already allocated memory. This -# can be lots faster and safer IMHO. +# "malloc" use mmap for all allocations and so works very well on MMU-less +# systems that do not support the brk() system call. It is pretty smart +# about reusing already allocated memory, and minimizing memory wastage. # -# "malloc-930716" is from libc-5.3.12 and was/is the standard gnu malloc. -# It is actually smaller than "malloc", but because it is based on brk/sbrk -# it will only work on systems with an MMU. -#MALLOC = malloc-simple +# "malloc-930716" is derived from libc-5.3.12 and uses the brk() system call +# for all memory allocations. This makes it very fast. It is also pretty +# smart about reusing already allocated memory, and minimizing memory wastage. +# Because this uses brk() it will not work on uClinux MMU-less systems. MALLOC = malloc #MALLOC = malloc-930716 diff --git a/extra/Configs/Config.m68k b/extra/Configs/Config.m68k index 90e1d4783..6a68fe786 100644 --- a/extra/Configs/Config.m68k +++ b/extra/Configs/Config.m68k @@ -86,18 +86,16 @@ HAS_LOCALE = false HAS_WCHAR = false # This specifies which malloc implementation is used. -# "malloc-simple" is very, very small, but is also very, very dumb -# and does not try to make good use of memory or clean up after itself. # -# "malloc" on the other hand is a bit bigger, but is pretty smart thereby -# minimizing memory wastage and reusing already allocated memory. This -# can be lots faster and safer IMHO. +# "malloc" use mmap for all allocations and so works very well on MMU-less +# systems that do not support the brk() system call. It is pretty smart +# about reusing already allocated memory, and minimizing memory wastage. # -# "malloc-930716" is from libc-5.3.12 and was/is the standard gnu malloc. -# It is actually smaller than "malloc", but because it is based on brk/sbrk -# it will only work on systems with an MMU. -MALLOC = malloc-simple -#MALLOC = malloc +# "malloc-930716" is derived from libc-5.3.12 and uses the brk() system call +# for all memory allocations. This makes it very fast. It is also pretty +# smart about reusing already allocated memory, and minimizing memory wastage. +# Because this uses brk() it will not work on uClinux MMU-less systems. +MALLOC = malloc #MALLOC = malloc-930716 # Having brk allows one to use malloc-930716, which is an order diff --git a/extra/Configs/Config.m68k.coff b/extra/Configs/Config.m68k.coff index 0ca204a7c..73cc40d23 100644 --- a/extra/Configs/Config.m68k.coff +++ b/extra/Configs/Config.m68k.coff @@ -86,18 +86,16 @@ HAS_LOCALE = false HAS_WCHAR = false # This specifies which malloc implementation is used. -# "malloc-simple" is very, very small, but is also very, very dumb -# and does not try to make good use of memory or clean up after itself. # -# "malloc" on the other hand is a bit bigger, but is pretty smart thereby -# minimizing memory wastage and reusing already allocated memory. This -# can be lots faster and safer IMHO. +# "malloc" use mmap for all allocations and so works very well on MMU-less +# systems that do not support the brk() system call. It is pretty smart +# about reusing already allocated memory, and minimizing memory wastage. # -# "malloc-930716" is from libc-5.3.12 and was/is the standard gnu malloc. -# It is actually smaller than "malloc", but because it is based on brk/sbrk -# it will only work on systems with an MMU. -MALLOC = malloc-simple -#MALLOC = malloc +# "malloc-930716" is derived from libc-5.3.12 and uses the brk() system call +# for all memory allocations. This makes it very fast. It is also pretty +# smart about reusing already allocated memory, and minimizing memory wastage. +# Because this uses brk() it will not work on uClinux MMU-less systems. +MALLOC = malloc #MALLOC = malloc-930716 # Having brk allows one to use malloc-930716, which is an order diff --git a/extra/Configs/Config.mips b/extra/Configs/Config.mips index eac4dd6ad..75ad13b43 100644 --- a/extra/Configs/Config.mips +++ b/extra/Configs/Config.mips @@ -89,17 +89,15 @@ HAS_LOCALE = false HAS_WCHAR = false # This specifies which malloc implementation is used. -# "malloc-simple" is very, very small, but is also very, very dumb -# and does not try to make good use of memory or clean up after itself. # -# "malloc" on the other hand is a bit bigger, but is pretty smart thereby -# minimizing memory wastage and reusing already allocated memory. This -# can be lots faster and safer IMHO. +# "malloc" use mmap for all allocations and so works very well on MMU-less +# systems that do not support the brk() system call. It is pretty smart +# about reusing already allocated memory, and minimizing memory wastage. # -# "malloc-930716" is from libc-5.3.12 and was/is the standard gnu malloc. -# It is actually smaller than "malloc", but because it is based on brk/sbrk -# it will only work on systems with an MMU. -#MALLOC = malloc-simple +# "malloc-930716" is derived from libc-5.3.12 and uses the brk() system call +# for all memory allocations. This makes it very fast. It is also pretty +# smart about reusing already allocated memory, and minimizing memory wastage. +# Because this uses brk() it will not work on uClinux MMU-less systems. #MALLOC = malloc MALLOC = malloc-930716 diff --git a/extra/Configs/Config.mipsel b/extra/Configs/Config.mipsel index acb00142b..c302199f7 100644 --- a/extra/Configs/Config.mipsel +++ b/extra/Configs/Config.mipsel @@ -89,17 +89,15 @@ HAS_LOCALE = false HAS_WCHAR = false # This specifies which malloc implementation is used. -# "malloc-simple" is very, very small, but is also very, very dumb -# and does not try to make good use of memory or clean up after itself. # -# "malloc" on the other hand is a bit bigger, but is pretty smart thereby -# minimizing memory wastage and reusing already allocated memory. This -# can be lots faster and safer IMHO. +# "malloc" use mmap for all allocations and so works very well on MMU-less +# systems that do not support the brk() system call. It is pretty smart +# about reusing already allocated memory, and minimizing memory wastage. # -# "malloc-930716" is from libc-5.3.12 and was/is the standard gnu malloc. -# It is actually smaller than "malloc", but because it is based on brk/sbrk -# it will only work on systems with an MMU. -#MALLOC = malloc-simple +# "malloc-930716" is derived from libc-5.3.12 and uses the brk() system call +# for all memory allocations. This makes it very fast. It is also pretty +# smart about reusing already allocated memory, and minimizing memory wastage. +# Because this uses brk() it will not work on uClinux MMU-less systems. #MALLOC = malloc MALLOC = malloc-930716 diff --git a/extra/Configs/Config.powerpc b/extra/Configs/Config.powerpc index 4cd446979..1d1cacf68 100644 --- a/extra/Configs/Config.powerpc +++ b/extra/Configs/Config.powerpc @@ -86,17 +86,15 @@ HAS_LOCALE = false HAS_WCHAR = false # This specifies which malloc implementation is used. -# "malloc-simple" is very, very small, but is also very, very dumb -# and does not try to make good use of memory or clean up after itself. # -# "malloc" on the other hand is a bit bigger, but is pretty smart thereby -# minimizing memory wastage and reusing already allocated memory. This -# can be lots faster and safer IMHO. +# "malloc" use mmap for all allocations and so works very well on MMU-less +# systems that do not support the brk() system call. It is pretty smart +# about reusing already allocated memory, and minimizing memory wastage. # -# "malloc-930716" is from libc-5.3.12 and was/is the standard gnu malloc. -# It is actually smaller than "malloc", but because it is based on brk/sbrk -# it will only work on systems with an MMU. -#MALLOC = malloc-simple +# "malloc-930716" is derived from libc-5.3.12 and uses the brk() system call +# for all memory allocations. This makes it very fast. It is also pretty +# smart about reusing already allocated memory, and minimizing memory wastage. +# Because this uses brk() it will not work on uClinux MMU-less systems. #MALLOC = malloc MALLOC = malloc-930716 diff --git a/extra/Configs/Config.sh b/extra/Configs/Config.sh index 399d6bcc5..0b6fccc25 100644 --- a/extra/Configs/Config.sh +++ b/extra/Configs/Config.sh @@ -110,18 +110,16 @@ HAS_LOCALE = false HAS_WCHAR = false # This specifies which malloc implementation is used. -# "malloc-simple" is very, very small, but is also very, very dumb -# and does not try to make good use of memory or clean up after itself. # -# "malloc" on the other hand is a bit bigger, but is pretty smart thereby -# minimizing memory wastage and reusing already allocated memory. This -# can be lots faster and safer IMHO. +# "malloc" use mmap for all allocations and so works very well on MMU-less +# systems that do not support the brk() system call. It is pretty smart +# about reusing already allocated memory, and minimizing memory wastage. # -# "malloc-930716" is from libc-5.3.12 and was/is the standard gnu malloc. -# It is actually smaller than "malloc", but because it is based on brk/sbrk -# it will only work on systems with an MMU. -MALLOC = malloc-simple -#MALLOC = malloc +# "malloc-930716" is derived from libc-5.3.12 and uses the brk() system call +# for all memory allocations. This makes it very fast. It is also pretty +# smart about reusing already allocated memory, and minimizing memory wastage. +# Because this uses brk() it will not work on uClinux MMU-less systems. +MALLOC = malloc #MALLOC = malloc-930716 # If you want to collect common syscall code into one function, set to this to diff --git a/extra/Configs/Config.sparc b/extra/Configs/Config.sparc index 761262365..f96e83020 100644 --- a/extra/Configs/Config.sparc +++ b/extra/Configs/Config.sparc @@ -86,17 +86,15 @@ HAS_LOCALE = false HAS_WCHAR = false # This specifies which malloc implementation is used. -# "malloc-simple" is very, very small, but is also very, very dumb -# and does not try to make good use of memory or clean up after itself. # -# "malloc" on the other hand is a bit bigger, but is pretty smart thereby -# minimizing memory wastage and reusing already allocated memory. This -# can be lots faster and safer IMHO. +# "malloc" use mmap for all allocations and so works very well on MMU-less +# systems that do not support the brk() system call. It is pretty smart +# about reusing already allocated memory, and minimizing memory wastage. # -# "malloc-930716" is from libc-5.3.12 and was/is the standard gnu malloc. -# It is actually smaller than "malloc", but because it is based on brk/sbrk -# it will only work on systems with an MMU. -#MALLOC = malloc-simple +# "malloc-930716" is derived from libc-5.3.12 and uses the brk() system call +# for all memory allocations. This makes it very fast. It is also pretty +# smart about reusing already allocated memory, and minimizing memory wastage. +# Because this uses brk() it will not work on uClinux MMU-less systems. #MALLOC = malloc MALLOC = malloc-930716 diff --git a/extra/Configs/Config.v850e b/extra/Configs/Config.v850e index f1e618a0c..bd0a62c9b 100644 --- a/extra/Configs/Config.v850e +++ b/extra/Configs/Config.v850e @@ -88,17 +88,15 @@ HAS_LOCALE = false HAS_WCHAR = false # This specifies which malloc implementation is used. -# "malloc-simple" is very, very small, but is also very, very dumb -# and does not try to make good use of memory or clean up after itself. # -# "malloc" on the other hand is a bit bigger, but is pretty smart thereby -# minimizing memory wastage and reusing already allocated memory. This -# can be lots faster and safer IMHO. +# "malloc" use mmap for all allocations and so works very well on MMU-less +# systems that do not support the brk() system call. It is pretty smart +# about reusing already allocated memory, and minimizing memory wastage. # -# "malloc-930716" is from libc-5.3.12 and was/is the standard gnu malloc. -# It is actually smaller than "malloc", but because it is based on brk/sbrk -# it will only work on systems with an MMU. -#MALLOC = malloc-simple +# "malloc-930716" is derived from libc-5.3.12 and uses the brk() system call +# for all memory allocations. This makes it very fast. It is also pretty +# smart about reusing already allocated memory, and minimizing memory wastage. +# Because this uses brk() it will not work on uClinux MMU-less systems. MALLOC = malloc #MALLOC = malloc-930716 |