diff options
Diffstat (limited to 'extra/Configs/Config.i386')
| -rw-r--r-- | extra/Configs/Config.i386 | 370 |
1 files changed, 184 insertions, 186 deletions
diff --git a/extra/Configs/Config.i386 b/extra/Configs/Config.i386 index 13e4916bb..4b3ff7b5a 100644 --- a/extra/Configs/Config.i386 +++ b/extra/Configs/Config.i386 @@ -1,189 +1,187 @@ -# Library Configuration rules for uClibc # -# This file contains rules which are shared between multiple Makefiles. All -# normal configuration options live in the file named "Config". You probably -# should not mess with this file unless you know what you are doing... -# -# Copyright (C) 2000 by Lineo, inc. -# Copyright (C) 2000,2001 Erik Andersen <andersee@debian.org> +# For a description of the syntax of this configuration file, +# see Documentation/kbuild/config-language.txt. # -# This program is free software; you can redistribute it and/or modify it under -# the terms of the GNU Library General Public License as published by the Free -# Software Foundation; either version 2 of the License, or (at your option) any -# later version. -# -# This program is distributed in the hope that it will be useful, but WITHOUT -# ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS -# FOR A PARTICULAR PURPOSE. See the GNU Library General Public License for more -# details. -# -# You should have received a copy of the GNU Library General Public License -# along with this program; if not, write to the Free Software Foundation, Inc., -# 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA -# -# Derived in part from the Linux-8086 C library, the GNU C Library, and several -# other sundry sources. Files within this library are copyright by their -# respective copyright holders. - -NATIVE_CC = gcc - -# If you are running a cross compiler, you may want to set this -# to something more interesting... Target architecture is determined -# by asking this compiler what arch it compiles stuff for. -CROSS = #$(TARGET_ARCH)-linux- -CC = $(CROSS)gcc -AR = $(CROSS)ar -LD = $(CROSS)ld -NM = $(CROSS)nm -STRIPTOOL = $(CROSS)strip -#STRIPTOOL = /bin/true - -# Set the following to `true' to make a debuggable build, and `false' for -# production builds. -DODEBUG = false - -# Compiler warnings you want to see -WARNINGS=-Wall - -# Note that the kernel source you use to compile with should be the same as the -# Linux kernel you run your apps on. uClibc doesn't even try to achieve binary -# compatibility across kernel versions. So don't expect, for example, uClibc -# compiled with Linux kernel 2.0.x to implement lchown properly, since 2.0.x -# can't do that. Similarly, if you compile uClibc vs Linux 2.4.x kernel headers, -# but then run on Linux 2.0.x, lchown will be compiled into uClibc, but won't -# work at all. You have been warned. -KERNEL_SOURCE=/usr/src/linux - -# Set this to `false' if your CPU doesn't have a memory management unit (MMU). -# Set it to `true' otherwise. -HAS_MMU = true - -# Set this to `false' if you don't have/need basic floating point support -# support in libc (strtod, printf, scanf). Set it to `true' otherwise. -# If this is not true, then libm will not be built. -HAS_FLOATING_POINT = true - -# Set to `true' if you want the math library to contain the full set -# of C99 math library features. Costs an extra 35k or so on x86. -DO_C99_MATH = false - -# Set this to 'false if you don't need shadow password support. -HAS_SHADOW = false - -# Set this to `false' if you don't have/need locale support; `true' otherwise. -# NOTE: Currently does not affect collation. -# You must also generate the locale data and associated .h file. -# See the README in directory extra/locale for details. -HAS_LOCALE = false - -# Set this to `false' if you don't have/need wide char support. -HAS_WCHAR = false - -# This specifies which malloc implementation is used. -# -# "malloc" use mmap for all allocations and so works very well on MMU-less -# systems that do not support the brk() system call. It is pretty smart -# about reusing already allocated memory, and minimizing memory wastage. -# -# "malloc-930716" is derived from libc-5.3.12 and uses the brk() system call -# for all memory allocations. This makes it very fast. It is also pretty -# smart about reusing already allocated memory, and minimizing memory wastage. -# Because this uses brk() it will not work on uClinux MMU-less systems. -#MALLOC = malloc -MALLOC = malloc-930716 - -# If you want large file support (greater then 2 GiB) turn this on. -# Do not enable this unless your kernel provides large file support. -DOLFS = false - -# Posix regular expression code is really big -- 27k all by itself. -# If you don't use regular expressions, turn this off and save space. -# Of course, if you only staticly link, leave this on, since it will -# only be included in your apps if you use regular expressions. -INCLUDE_REGEX=true - -# If you want to include RPC support, enable this. RPC is almost never used -# for anything except NFS support, so unless you plan to use NFS, leave this -# disabled. This is off by default. -INCLUDE_RPC = false - -# Normally we enable just enough RPC support for things like rshd and -# nfs mount to work. If you find you need the rest of the RPC stuff, -# then enable this. -INCLUDE_FULL_RPC = false - -# If you want to include support for the next version of the Internet -# Protocol: IP version 6, enable this. This is off by default. -INCLUDE_IPV6 = false - -# If you want to include threads support, enable this. The C library will -# be compiled thread-safe, and the libpthread library will be built. -INCLUDE_THREADS = true - -# If you want to support only Unix 98 PTYs enable this. Some older -# applications may need this disabled. For most current programs, -# you can generally leave this true. -UNIX98PTY_ONLY = true - -# Enable this if /dev/pts is on a devpts or devfs file system. Both -# these filesystems automatically manage permissions on the /dev/pts -# devices. You may need to mount this fs on /dev/pts for this to work. -# This is true by default. -ASSUME_DEVPTS = true - - -# If you want to compile the library as PIC code, turn this on. -# This is automagically enabled when HAVE_SHARED is true -DOPIC = false - -# Enable support for shared libraries? If this is false, you can -# ignore all the rest of the options in this file... -HAVE_SHARED = true - -# uClibc has a native shared library loader for some architectures. -BUILD_UCLIBC_LDSO=true - -# If you are using shared libraries, but do not want/have a native -# uClibc shared library loader, please specify the name of your -# system's shared library loader here... -#SYSTEM_LDSO=/lib/ld-linux.so.2 - -# When using shared libraries, this path is the location where the -# shared library will be invoked. This value will be compiled into -# every binary compiled with uClibc. -# -# BIG FAT WARNING: -# If you do not have a shared library loader with the correct name -# sitting in the directory this points to, your binaries will not run. -SHARED_LIB_LOADER_PATH=$(DEVEL_PREFIX)/lib - -# DEVEL_PREFIX is the directory into which the uClibc development -# environment will be installed. The result will look something -# like the following: -# DEVEL_PREFIX/ -# lib/ <contains all runtime and static libs> -# include/ <Where all the header files go> -# This value is used by the 'make install' Makefile target. Since this -# directory is compiled into the uclibc cross compiler spoofer, you -# have to recompile if you change this value... -DEVEL_PREFIX = /usr/$(TARGET_ARCH)-linux-uclibc - -# SYSTEM_DEVEL_PREFIX is the directory prefix used when installing -# bin/arch-uclibc-gcc, bin/arch-uclibc-ld, etc. This is only used by -# the 'make install' target, and is not compiled into anything. This -# defaults to $DEVEL_PREFIX/usr, but makers of .rpms and .debs will -# want to set this to "/usr" instead. -SYSTEM_DEVEL_PREFIX = $(DEVEL_PREFIX) - -# DEVEL_TOOL_PREFIX is the directory prefix used when installing -# bin/gcc, bin/ld, etc. This is only used by the 'make install' -# target, and is not compiled into anything. This defaults to -# $DEVEL_PREFIX/usr, but makers of .rpms and .debs may want to -# set this to something else. -DEVEL_TOOL_PREFIX = $(DEVEL_PREFIX)/usr - -# If you want 'make install' to install everything under a temporary -# directory, the define PREFIX during the install step, -# i.e., 'make PREFIX=/var/tmp/uClibc install'. -#PREFIX = $(TOPDIR)/_install + +mainmenu "uClibc C Library Configuration" + +menu "Target Architecture Features and Options" + +choice + prompt "Target Processor Type" + default CONFIG_386 + help + This is the processor type of your CPU. This information is used for + optimizing purposes. To build a library that will run on all x86 CPU + types (albeit not optimally fast), you can specify "386" here. If + you pick anything other than "386", there is no guarantee that uClibc + will even run on anything other than the selected processor type. + + Here are the settings recommended for greatest speed: + - "386" for the AMD/Cyrix/Intel 386DX/DXL/SL/SLC/SX, Cyrix/TI + 486DLC/DLC2, UMC 486SX-S and NexGen Nx586. Only "386" kernels + will run on a 386 class machine. + - "486" for the AMD/Cyrix/IBM/Intel 486DX/DX2/DX4 or + SL/SLC/SLC2/SLC3/SX/SX2 and UMC U5D or U5S. + - "586" for generic Pentium CPUs lacking the TSC + (time stamp counter) register. + - "Pentium-Classic" for the Intel Pentium. + - "Pentium-MMX" for the Intel Pentium MMX. + - "Pentium-Pro" for the Intel Pentium Pro/Celeron/Pentium II. + - "Pentium-III" for the Intel Pentium III + and Celerons based on the Coppermine core. + - "Pentium-4" for the Intel Pentium 4. + - "K6" for the AMD K6, K6-II and K6-III (aka K6-3D). + - "Athlon" for the AMD K7 family (Athlon/Duron/Thunderbird). + - "Crusoe" for the Transmeta Crusoe series. + - "Winchip-C6" for original IDT Winchip. + - "Winchip-2" for IDT Winchip 2. + - "Winchip-2A" for IDT Winchips with 3dNow! capabilities. + - "CyrixIII/VIA C3" for VIA Cyrix III or VIA C3. + + If you don't know what to do, choose "386". + +config CONFIG_386 + bool "386" + +config CONFIG_486 + bool "486" + +config CONFIG_586 + bool "586/K5/5x86/6x86/6x86MX" + +config CONFIG_586TSC + bool "Pentium-Classic" + +config CONFIG_586MMX + bool "Pentium-MMX" + +config CONFIG_686 + bool "Pentium-Pro/Celeron/Pentium-II" + +config CONFIG_PENTIUMIII + bool "Pentium-III/Celeron(Coppermine)" + +config CONFIG_PENTIUM4 + bool "Pentium-4" + +config CONFIG_K6 + bool "K6/K6-II/K6-III" + +config CONFIG_K7 + bool "Athlon/Duron/K7" + +config CONFIG_ELAN + bool "Elan" + +config CONFIG_CRUSOE + bool "Crusoe" + +config CONFIG_WINCHIPC6 + bool "Winchip-C6" + +config CONFIG_WINCHIP2 + bool "Winchip-2" + +config CONFIG_WINCHIP3D + bool "Winchip-2A/Winchip-3" + +config CONFIG_CYRIXIII + bool "CyrixIII/VIA-C3" + +endchoice + +config UCLIBC_HAS_MMU + bool "Target CPU has a memory management unit (MMU)" + default y + help + If your target CPU does not have a memory management unit (MMU), + then answer N here. Normally, Linux runs on systems with an MMU. + If you are building a uClinux system, answer N. + + Most people will answer Y. + +config UCLIBC_HAS_FLOATS + bool "Enable floating point number support" + default y + help + This option allows you to entirely omit all floating point number + support from uClibc. This will cause floating point functions like + strtod() to be entirely omitted from uClibc. Other functions, such + as printf() and scanf() will still be included in the library, but + will not contain support for floating point numbers. + + Answering N to this option can reduce the size of uClibc. Most people + will answer Y. + +config HAS_FPU + bool "Target CPU has a floating point unit (FPU)" + depends on UCLIBC_HAS_FLOATS + default y + help + If your target CPU does not have a floating management unit (FPU), + but you wish to support floating point functions, then uClibc will + need to be compiled with soft floating point support (-msoft-float). + If your target CPU does not have an FPU or an FPU emulator within the + Linux kernel, then you should answer N. + + Most people will answer Y. + +config DO_C99_MATH + bool "Enable full C99 math library support" + depends on UCLIBC_HAS_FLOATS + default n + help + If you want the uClibc math library to contain the full set C99 + math library features, then answer Y. If you leave this set to + N the math library will contain only the math functions that were + listed as part of the traditionla POSIX/IEEE 1003.1b-1993 standard. + Leaving this option set to N will save around 35k on an x86 system. + + If your applications require the newer C99 math library functions, + then answer Y. + +config WARNINGS + string "Compiler Warnings" + default "-Wall" + help + Set this to the set of gcc warnings you wish to see while compiling. + +config KERNEL_SOURCE + string "Linux kernel header location" + default "/usr/src/linux" + help + The kernel source you use to compile with should be the same as the + Linux kernel you run your apps on. uClibc doesn't even try to achieve binary + compatibility across kernel versions. So don't expect, for example, uClibc + compiled with Linux kernel 2.0.x to implement lchown properly, since 2.0.x + can't do that. Similarly, if you compile uClibc vs Linux 2.4.x kernel headers, + but then run on Linux 2.0.x, lchown will be compiled into uClibc, but won't + work at all. You have been warned. + +config C_SYMBOL_PREFIX + string + default "" + +config UCLIBC_UCLINUX_BROKEN_MUNMAP + bool + depends on !HAS_MMU + default y + +config HAVE_ELF + bool + default y + +config NO_UNDERSCORES + bool + default n + +config HAVE_DOT_HIDDEN + bool + default n + +endmenu + +source "extra/Configs/Config.in" + |