diff options
Diffstat (limited to 'extra/Configs/Config.h8300')
| -rw-r--r-- | extra/Configs/Config.h8300 | 202 |
1 files changed, 25 insertions, 177 deletions
diff --git a/extra/Configs/Config.h8300 b/extra/Configs/Config.h8300 index 8062fe64b..e3a63a5af 100644 --- a/extra/Configs/Config.h8300 +++ b/extra/Configs/Config.h8300 @@ -1,192 +1,40 @@ -# Library Configuration rules for uClibc # -# This file contains rules which are shared between multiple Makefiles. All -# normal configuration options live in the file named "Config". You probably -# should not mess with this file unless you know what you are doing... -# -# Copyright (C) 2002 Erik Andersen <andersee@debian.org> +# For a description of the syntax of this configuration file, +# see Documentation/kbuild/config-language.txt. # -# This program is free software; you can redistribute it and/or modify it under -# the terms of the GNU Library General Public License as published by the Free -# Software Foundation; either version 2 of the License, or (at your option) any -# later version. -# -# This program is distributed in the hope that it will be useful, but WITHOUT -# ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS -# FOR A PARTICULAR PURPOSE. See the GNU Library General Public License for more -# details. -# -# You should have received a copy of the GNU Library General Public License -# along with this program; if not, write to the Free Software Foundation, Inc., -# 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA -# -# Derived in part from the Linux-8086 C library, the GNU C Library, and several -# other sundry sources. Files within this library are copyright by their -# respective copyright holders. - -# What arch do you want to compile for... -#TARGET_ARCH=arm -#TARGET_ARCH=i386 -#TARGET_ARCH=m68k -#TARGET_ARCH=powerpc -#TARGET_ARCH=sh -#TARGET_ARCH=sparc -TARGET_ARCH=h8300 - -# If you are running a cross compiler, you may want to set this -# to something more interesting... -NATIVE_CC = gcc -CROSS = h8300-hitachi-hms- -CC = $(CROSS)gcc -AR = $(CROSS)ar -LD = $(CROSS)ld -NM = $(CROSS)nm -STRIPTOOL = $(CROSS)strip -#STRIPTOOL = /bin/true - -# Set the following to `true' to make a debuggable build, and `false' for -# production builds. -DODEBUG = false - -# Compiler warnings you want to see -WARNINGS=-Wall - -# Note that the kernel source you use to compile with should be the same as the -# Linux kernel you run your apps on. uClibc doesn't even try to achieve binary -# compatibility across kernel versions. So don't expect, for example, uClibc -# compiled with Linux kernel 2.0.x to implement lchown properly, since 2.0.x -# can't do that. Similarly, if you compile uClibc vs Linux 2.4.x kernel headers, -# but then run on Linux 2.0.x, lchown will be compiled into uClibc, but won't -# work at all. You have been warned. -KERNEL_SOURCE=/opt/uClinux/linux -# Set this to `false' if your CPU doesn't have a memory management unit (MMU). -# Set it to `true' otherwise. -HAS_MMU = false - -# Set this to `false' if you don't have/need basic floating point support -# support in libc (strtod, printf, scanf). Set it to `true' otherwise. -# If this is not true, then libm will not be built. -HAS_FLOATING_POINT = true - -# Set to `true' if you want the math library to contain the full set -# of C99 math library features. Costs an extra 35k or so on x86. -DO_C99_MATH = false - -# Set this to `false' if you don't have/need locale support; `true' otherwise. -# NOTE: Currently does not affect collation. -# You must also generate the locale data and associated .h file. -# See the README in directory extra/locale for details. -HAS_LOCALE = false - -# Set this to `false' if you don't have/need wide char support. -HAS_WCHAR = false - -# This specifies which malloc implementation is used. -# -# "malloc" use mmap for all allocations and so works very well on MMU-less -# systems that do not support the brk() system call. It is pretty smart -# about reusing already allocated memory, and minimizing memory wastage. -# -# "malloc-930716" is derived from libc-5.3.12 and uses the brk() system call -# for all memory allocations. This makes it very fast. It is also pretty -# smart about reusing already allocated memory, and minimizing memory wastage. -# Because this uses brk() it will not work on uClinux MMU-less systems. -MALLOC = malloc -#MALLOC = malloc-930716 +mainmenu "uClibc C Library Configuration" -# If you want large file summit support (greater then 2 Gib), -# turn this on. This has no effect unless your kernel supports -# lfs. This currently does nothing, but may someday... -DOLFS = false +menu "Target Architecture Features and Options" -# If you want to include RPC support, enable this. RPC is almost never used -# for anything except NFS support, so unless you plan to use NFS, leave this -# disabled. This is off by default. -INCLUDE_RPC = true +config HAVE_ELF + bool + default n -# Normally we enable just enough RPC support for things like rshd and -# nfs mount to work. If you find you need the rest of the RPC stuff, -# then enable this. -INCLUDE_FULL_RPC = false +config C_SYMBOL_PREFIX + string + default "_" -# If you want to include support for the next version of the Internet -# Protocol: IP version 6, enable this. This is off by default. -INCLUDE_IPV6 = false +config ARCH_CFLAGS + string + default "-mh -mint32 -fsigned-char" -# If you want to compile the library as PIC code, turn this on. -DOPIC = false +config ARCH_LDFLAGS + string + default "" -# -# ARCH_CFLAGS if your have something special to add to the CFLAGS -# -ARCH_CFLAGS = -mh -mint32 -fsigned-char -# -# this is needed for 2.4 m68knommu builds -# -ARCH_CFLAGS2 = -I$(KERNEL_SOURCE)/include -# -# get this from elsewhere, maybe -# -OPTIMIZATION = $(DEBUG_CFLAGS) -mh -mint32 -fsigned-char - -# This is a COFF compiler (ick), so disable all the cool stuff -HAVE_ELF = false - - - -# Enable support for shared libraries? If this is false, you can -# ignore all the rest of the options in this file... -HAVE_SHARED = false - -# uClibc has a native shared library loader for some architectures. -BUILD_UCLIBC_LDSO=false - -# If you are using shared libraries, but do not want/have a native -# uClibc shared library loader, please specify the name of your -# system's shared library loader here... -#SYSTEM_LDSO=/lib/ld-linux.so.2 - -# When using shared libraries, this path is the location where the -# shared library will be invoked. This value will be compiled into -# every binary compiled with uClibc. -# -# BIG FAT WARNING: -# If you do not have a shared library loader with the correct name -# sitting in the directory this points to, your binaries will not run. -#SHARED_LIB_LOADER_PATH=$(DEVEL_PREFIX)/lib +config LIBGCC_CFLAGS + string + default "" -# C defiend symbols prefix charactor -C_SYMBOL_PREFIX = _ +config ARCH_HAS_NO_MMU + bool + default y -# DEVEL_PREFIX is the directory into which the uClibc development -# environment will be installed. The result will look something -# like the following: -# DEVEL_PREFIX/ -# lib/ <contains all runtime and static libs> -# include/ <Where all the header files go> -# This value is used by the 'make install' Makefile target. Since this -# directory is compiled into the uclibc cross compiler spoofer, you -# have to recompile if you change this value... -#DEVEL_PREFIX = /usr/$(TARGET_ARCH)-linux-uclibc -DEVEL_PREFIX = /opt/uClinux/$(TARGET_ARCH)-coff +source "extra/Configs/Config.in.arch" -# SYSTEM_DEVEL_PREFIX is the directory prefix used when installing -# bin/arch-uclibc-gcc, bin/arch-uclibc-ld, etc. This is only used by -# the 'make install' target, and is not compiled into anything. This -# defaults to $DEVEL_PREFIX/usr, but makers of .rpms and .debs will -# want to set this to "/usr" instead. -SYSTEM_DEVEL_PREFIX = $(DEVEL_PREFIX) +endmenu -# DEVEL_TOOL_PREFIX is the directory prefix used when installing -# bin/gcc, bin/ld, etc. This is only used by the 'make install' -# target, and is not compiled into anything. This defaults to -# $DEVEL_PREFIX/usr, but makers of .rpms and .debs may want to -# set this to something else. -DEVEL_TOOL_PREFIX = $(DEVEL_PREFIX)/usr +source "extra/Configs/Config.in" -# If you want 'make install' to install everything under a temporary -# directory, the define PREFIX during the install step, -# i.e., 'make PREFIX=/var/tmp/uClibc install'. -#PREFIX = $(TOPDIR)/_install |