diff options
| -rw-r--r-- | .cvsignore | 1 | ||||
| -rw-r--r-- | Makefile | 19 | ||||
| -rw-r--r-- | Rules.mak | 6 | ||||
| -rw-r--r-- | extra/Configs/Config.arm | 147 | ||||
| -rw-r--r-- | extra/Configs/Config.i386 | 147 | ||||
| -rw-r--r-- | extra/Configs/Config.m68k | 161 | ||||
| -rw-r--r-- | extra/Configs/Config.mips | 148 | ||||
| -rw-r--r-- | extra/Configs/Config.mipsel | 148 | ||||
| -rw-r--r-- | extra/Configs/Config.powerpc | 147 | ||||
| -rw-r--r-- | extra/Configs/Config.sh | 169 | ||||
| -rw-r--r-- | extra/Configs/Config.x86 | 147 | ||||
| -rw-r--r-- | include/math.h | 22 | ||||
| -rw-r--r-- | libc/misc/internals/Makefile | 2 | ||||
| -rw-r--r-- | libc/stdlib/Makefile | 2 | ||||
| -rw-r--r-- | libm/Makefile | 8 |
15 files changed, 1250 insertions, 24 deletions
diff --git a/.cvsignore b/.cvsignore index 0197571b1..45aa35e0c 100644 --- a/.cvsignore +++ b/.cvsignore @@ -6,3 +6,4 @@ uClibc_config.h uClibc-0* libuClibc-0* lib +Config @@ -83,20 +83,25 @@ uClibc_config.h: Config else \ echo "#undef __UCLIBC_HAS_MMU__" >> uClibc_config.h ; \ fi - @if [ "$(HAS_FLOATS)" = "true" ] ; then \ + @if [ "$(HAS_FLOATING_POINT)" = "true" ] ; then \ echo "#define __UCLIBC_HAS_FLOATS__ 1" >> uClibc_config.h ; \ else \ echo "#undef __UCLIBC_HAS_FLOATS__" >> uClibc_config.h ; \ fi - @if [ "$(HAS_DOUBLE)" = "true" ] ; then \ - echo "#define __UCLIBC_HAS_DOUBLE__ 1" >> uClibc_config.h ; \ + @if [ "$(HAS_LIBM_FLOAT)" = "true" ] ; then \ + echo "#define __UCLIBC_HAS_LIBM_FLOAT__ 1" >> uClibc_config.h ; \ else \ - echo "#undef __UCLIBC_HAS_DOUBLE__" >> uClibc_config.h ; \ + echo "#undef __UCLIBC_HAS_LIBM_FLOAT__" >> uClibc_config.h ; \ fi - @if [ "$(HAS_LONG_DOUBLE)" = "true" ] ; then \ - echo "#define __UCLIBC_HAS_LONG_DOUBLE__ 1" >> uClibc_config.h ; \ + @if [ "$(HAS_LIBM_DOUBLE)" = "true" ] ; then \ + echo "#define __UCLIBC_HAS_LIBM_DOUBLE__ 1" >> uClibc_config.h ; \ else \ - echo "#undef __UCLIBC_HAS_LONG_DOUBLE__" >> uClibc_config.h ; \ + echo "#undef __UCLIBC_HAS_LIBM_DOUBLE__" >> uClibc_config.h ; \ + fi + @if [ "$(HAS_LIBM_LONG_DOUBLE)" = "true" ] ; then \ + echo "#define __UCLIBC_HAS_LIBM_LONG_DOUBLE__ 1" >> uClibc_config.h ; \ + else \ + echo "#undef __UCLIBC_HAS_LIBM_LONG_DOUBLE__" >> uClibc_config.h ; \ fi @if [ "$(HAS_LONG_LONG)" = "true" ] ; then \ echo "#define __UCLIBC_HAS_LONG_LONG__ 1" >> uClibc_config.h ; \ @@ -85,6 +85,12 @@ else DYNAMIC_LINKER=$(SYSTEM_LDSO) endif +# Disable libm if HAS_FLOATING_POINT isn't true. +ifneq ($(HAS_FLOATING_POINT),true) + HAS_LIBM_FLOAT = false + HAS_LIBM_DOUBLE = false + HAS_LIBM_LONG_DOUBLE = false +endif # It turns out the currently, function-sections causes ldelf2flt to segfault. # So till further notice, this is disabled by default.... diff --git a/extra/Configs/Config.arm b/extra/Configs/Config.arm new file mode 100644 index 000000000..1d5433b3f --- /dev/null +++ b/extra/Configs/Config.arm @@ -0,0 +1,147 @@ +# Library Configuration rules for uClibc +# +# This file contains rules which are shared between multiple Makefiles. Feel +# free to adjust to taste... +# -Erik Andersen <andersen@lineo.com> <andersee@debian.org> +# +# Copyright (C) 2000 by Lineo, inc. +# +# This program is free software; you can redistribute it and/or modify it under +# the terms of the GNU Library General Public License as published by the Free +# Software Foundation; either version 2 of the License, or (at your option) any +# later version. +# +# This program is distributed in the hope that it will be useful, but WITHOUT +# ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS +# FOR A PARTICULAR PURPOSE. See the GNU Library General Public License for more +# details. +# +# You should have received a copy of the GNU Library General Public License +# along with this program; if not, write to the Free Software Foundation, Inc., +# 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA +# +# Derived in part from the Linux-8086 C library, the GNU C Library, and several +# other sundry sources. Files within this library are copyright by their +# respective copyright holders. + +# What arch do you want to compile for... +TARGET_ARCH=arm +#TARGET_ARCH=i386 +#TARGET_ARCH=m68k +#TARGET_ARCH=powerpc +#TARGET_ARCH=sh +#TARGET_ARCH=sparc + +# If you are running a cross compiler, you may want to set this +# to something more interesting... +NATIVE_CC = gcc +CROSS = #arm-linux- +CC = $(CROSS)gcc +AR = $(CROSS)ar +LD = $(CROSS)ld +STRIPTOOL = $(CROSS)strip +#STRIPTOOL = /bin/true + +# Set the following to `true' to make a debuggable build, and `false' for +# production builds. +DODEBUG = false + +# Compiler warnings you want to see +WARNINGS=-Wall + +# Note that the kernel source you use to compile with should be the same as the +# Linux kernel you run your apps on. uClibc doesn't even try to achieve binary +# compatibility across kernel versions. So don't expect, for example, uClibc +# compiled with Linux kernel 2.0.x to implement lchown properly, since 2.0.x +# can't do that. Similarly, if you compile uClibc vs Linux 2.4.x kernel headers, +# but then run on Linux 2.0.x, lchown will be compiled into uClibc, but won't +# work at all. You have been warned. +KERNEL_SOURCE=/usr/src/linux + +# Set this to `false' if your CPU doesn't have a memory management unit (MMU). +# Set it to `true' otherwise. +HAS_MMU = false + +# Set this to `false' if you don't have/need basic floating point support +# support in libc (strtod, printf, scanf). Set it to `true' otherwise. +# Note: If not true, Rules.mak disables libm as well. +HAS_FLOATING_POINT = false + +# Set this to `false' if you don't have/need float functions in libm. +# Set it to `true' otherwise, and make sure HAS_FLOATING_POINT is true as well. +HAS_LIBM_FLOAT = false + +# Set this to `false' if you don't have/need double functions in libm. +# Set it to `true' otherwise, and make sure HAS_FLOATING_POINT is true as well. +HAS_LIBM_DOUBLE = false + +# Set this to `false' if you don't have/need long double functions in libm. +# Set it to `true' otherwise, and make sure HAS_FLOATING_POINT is true as well. +HAS_LIBM_LONG_DOUBLE = false + +# Set this to `false' if you don't have/need "(unsigned) long long int" support. +# Set it to `true' otherwise. +# Affects *printf and *scanf functions. +# Also omits strto(u)ll, and (u)lltostr from the library if `false'. +HAS_LONG_LONG = true + +# Set this to `false' if you don't have/need locale support; `true' otherwise. +# Note: Currently only affects the ctype functions. You must also generate +# a locale file for anything but the C locale. See directory extra/locale for +# a utility to do so. Also see the following option. +HAS_LOCALE = false + +# Set this to the path of your uClibc locale file directory. +# Warning! This must be different than the glibc locale directory to avoid +# name conflicts, as the locale files are entirely different in format! +LOCALE_DIR = "/usr/share/uClibc-locale/" + +# This specifies which malloc implementation is used. +# "malloc-simple" is very, very small, but is also very, very dumb +# and does not try to make good use of memory or clean up after itself. +# +# "malloc" on the other hand is a bit bigger, but is pretty smart thereby +# minimizing memory wastage and reusing already allocated memory. This +# can be lots faster and safer IMHO. +# +# "malloc-930716" is from libc-5.3.12 and was/is the standard gnu malloc. +# It is actually smaller than "malloc", at least on i386. Right now, it +# only works on i386 (and maybe m68k) because it needs sbrk. +#MALLOC = malloc-simple +MALLOC = malloc +#MALLOC = malloc-930716 + +# If you want to collect common syscall code into one function, set to this to +# `true'. Set it to false otherwise. +# On i386 this saves about than 2.8k over all syscalls. +# The idea came from the implementation in dietlibc. +# At present, only affects i386. +UNIFIED_SYSCALL = false + +# If you want large file summit support (greater then 2 Gib), +# turn this on. This has no effect unless your kernel supports +# lfs. This currently does nothing, but may someday... +DOLFS = false + +# If you want to include RPC support, enable this. RPC is almost never used +# for anything except NFS support, so unless you plan to use NFS, leave this +# disabled. This is off by default. +INCLUDE_RPC = false + +# Installation location. For the default uClinux installation from +# Lineo for m68k, it should be: +# /opt/uClinux/m68k-pic-coff +# so includes installed in: /opt/uClinux/m68k-pic-coff/include +# libc.a and crt0.o in: /opt/uClinux/m68k-pic-coff/lib +# +# For ARM it should be: +# /opt/uClinux/arm-pic-elf +# so includes installed in: /opt/uClinux/arm-pic-elf/include +# libc.a and crt0.o in: /opt/uClinux/arm-pic-elf/lib +# +# For x86 this should be: +# /usr/i386-linux-uclibc +# so includes installed in: /usr/i386-linux-uclibc/include +# libc.a, libc.so.#, crt0.o in: /usr/i386-linux-uclibc/lib +# +INSTALL_DIR = /usr/$(TARGET_ARCH)-linux-uclibc diff --git a/extra/Configs/Config.i386 b/extra/Configs/Config.i386 new file mode 100644 index 000000000..e05059bd4 --- /dev/null +++ b/extra/Configs/Config.i386 @@ -0,0 +1,147 @@ +# Library Configuration rules for uClibc +# +# This file contains rules which are shared between multiple Makefiles. Feel +# free to adjust to taste... +# -Erik Andersen <andersen@lineo.com> <andersee@debian.org> +# +# Copyright (C) 2000 by Lineo, inc. +# +# This program is free software; you can redistribute it and/or modify it under +# the terms of the GNU Library General Public License as published by the Free +# Software Foundation; either version 2 of the License, or (at your option) any +# later version. +# +# This program is distributed in the hope that it will be useful, but WITHOUT +# ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS +# FOR A PARTICULAR PURPOSE. See the GNU Library General Public License for more +# details. +# +# You should have received a copy of the GNU Library General Public License +# along with this program; if not, write to the Free Software Foundation, Inc., +# 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA +# +# Derived in part from the Linux-8086 C library, the GNU C Library, and several +# other sundry sources. Files within this library are copyright by their +# respective copyright holders. + +# What arch do you want to compile for... +#TARGET_ARCH=arm +TARGET_ARCH=i386 +#TARGET_ARCH=m68k +#TARGET_ARCH=powerpc +#TARGET_ARCH=sh +#TARGET_ARCH=sparc + +# If you are running a cross compiler, you may want to set this +# to something more interesting... +NATIVE_CC = gcc +CROSS = #i386-linux- +CC = $(CROSS)gcc +AR = $(CROSS)ar +LD = $(CROSS)ld +STRIPTOOL = $(CROSS)strip +#STRIPTOOL = /bin/true + +# Set the following to `true' to make a debuggable build, and `false' for +# production builds. +DODEBUG = false + +# Compiler warnings you want to see +WARNINGS=-Wall + +# Note that the kernel source you use to compile with should be the same as the +# Linux kernel you run your apps on. uClibc doesn't even try to achieve binary +# compatibility across kernel versions. So don't expect, for example, uClibc +# compiled with Linux kernel 2.0.x to implement lchown properly, since 2.0.x +# can't do that. Similarly, if you compile uClibc vs Linux 2.4.x kernel headers, +# but then run on Linux 2.0.x, lchown will be compiled into uClibc, but won't +# work at all. You have been warned. +KERNEL_SOURCE=/usr/src/linux + +# Set this to `false' if your CPU doesn't have a memory management unit (MMU). +# Set it to `true' otherwise. +HAS_MMU = true + +# Set this to `false' if you don't have/need basic floating point support +# support in libc (strtod, printf, scanf). Set it to `true' otherwise. +# Note: If not true, Rules.mak disables libm as well. +HAS_FLOATING_POINT = true + +# Set this to `false' if you don't have/need float functions in libm. +# Set it to `true' otherwise, and make sure HAS_FLOATING_POINT is true as well. +HAS_LIBM_FLOAT = false + +# Set this to `false' if you don't have/need double functions in libm. +# Set it to `true' otherwise, and make sure HAS_FLOATING_POINT is true as well. +HAS_LIBM_DOUBLE = false + +# Set this to `false' if you don't have/need long double functions in libm. +# Set it to `true' otherwise, and make sure HAS_FLOATING_POINT is true as well. +HAS_LIBM_LONG_DOUBLE = false + +# Set this to `false' if you don't have/need "(unsigned) long long int" support. +# Set it to `true' otherwise. +# Affects *printf and *scanf functions. +# Also omits strto(u)ll, and (u)lltostr from the library if `false'. +HAS_LONG_LONG = true + +# Set this to `false' if you don't have/need locale support; `true' otherwise. +# Note: Currently only affects the ctype functions. You must also generate +# a locale file for anything but the C locale. See directory extra/locale for +# a utility to do so. Also see the following option. +HAS_LOCALE = false + +# Set this to the path of your uClibc locale file directory. +# Warning! This must be different than the glibc locale directory to avoid +# name conflicts, as the locale files are entirely different in format! +LOCALE_DIR = "/usr/share/uClibc-locale/" + +# This specifies which malloc implementation is used. +# "malloc-simple" is very, very small, but is also very, very dumb +# and does not try to make good use of memory or clean up after itself. +# +# "malloc" on the other hand is a bit bigger, but is pretty smart thereby +# minimizing memory wastage and reusing already allocated memory. This +# can be lots faster and safer IMHO. +# +# "malloc-930716" is from libc-5.3.12 and was/is the standard gnu malloc. +# It is actually smaller than "malloc", at least on i386. Right now, it +# only works on i386 (and maybe m68k) because it needs sbrk. +#MALLOC = malloc-simple +MALLOC = malloc +#MALLOC = malloc-930716 + +# If you want to collect common syscall code into one function, set to this to +# `true'. Set it to false otherwise. +# On i386 this saves about than 2.8k over all syscalls. +# The idea came from the implementation in dietlibc. +# At present, only affects i386. +UNIFIED_SYSCALL = false + +# If you want large file summit support (greater then 2 Gib), +# turn this on. This has no effect unless your kernel supports +# lfs. This currently does nothing, but may someday... +DOLFS = false + +# If you want to include RPC support, enable this. RPC is almost never used +# for anything except NFS support, so unless you plan to use NFS, leave this +# disabled. This is off by default. +INCLUDE_RPC = false + +# Installation location. For the default uClinux installation from +# Lineo for m68k, it should be: +# /opt/uClinux/m68k-pic-coff +# so includes installed in: /opt/uClinux/m68k-pic-coff/include +# libc.a and crt0.o in: /opt/uClinux/m68k-pic-coff/lib +# +# For ARM it should be: +# /opt/uClinux/arm-pic-elf +# so includes installed in: /opt/uClinux/arm-pic-elf/include +# libc.a and crt0.o in: /opt/uClinux/arm-pic-elf/lib +# +# For x86 this should be: +# /usr/i386-linux-uclibc +# so includes installed in: /usr/i386-linux-uclibc/include +# libc.a, libc.so.#, crt0.o in: /usr/i386-linux-uclibc/lib +# +INSTALL_DIR = /usr/$(TARGET_ARCH)-linux-uclibc diff --git a/extra/Configs/Config.m68k b/extra/Configs/Config.m68k new file mode 100644 index 000000000..69a9623c8 --- /dev/null +++ b/extra/Configs/Config.m68k @@ -0,0 +1,161 @@ +# Library Configuration rules for uClibc +# +# This file contains rules which are shared between multiple Makefiles. Feel +# free to adjust to taste... +# -Erik Andersen <andersen@lineo.com> <andersee@debian.org> +# +# Copyright (C) 2000 by Lineo, inc. +# +# This program is free software; you can redistribute it and/or modify it under +# the terms of the GNU Library General Public License as published by the Free +# Software Foundation; either version 2 of the License, or (at your option) any +# later version. +# +# This program is distributed in the hope that it will be useful, but WITHOUT +# ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS +# FOR A PARTICULAR PURPOSE. See the GNU Library General Public License for more +# details. +# +# You should have received a copy of the GNU Library General Public License +# along with this program; if not, write to the Free Software Foundation, Inc., +# 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA +# +# Derived in part from the Linux-8086 C library, the GNU C Library, and several +# other sundry sources. Files within this library are copyright by their +# respective copyright holders. + +# What arch do you want to compile for... +#TARGET_ARCH=arm +#TARGET_ARCH=i386 +TARGET_ARCH=m68k +#TARGET_ARCH=powerpc +#TARGET_ARCH=sh +#TARGET_ARCH=sparc + +# If you are running a cross compiler, you may want to set this +# to something more interesting... +NATIVE_CC = gcc +#CROSS = m68k-elf- +CC = $(CROSS)gcc +AR = $(CROSS)ar +LD = $(CROSS)ld +STRIPTOOL = $(CROSS)strip +#STRIPTOOL = /bin/true + +# Set the following to `true' to make a debuggable build, and `false' for +# production builds. +DODEBUG = false + +# Compiler warnings you want to see +WARNINGS=-Wall + +# Note that the kernel source you use to compile with should be the same as the +# Linux kernel you run your apps on. uClibc doesn't even try to achieve binary +# compatibility across kernel versions. So don't expect, for example, uClibc +# compiled with Linux kernel 2.0.x to implement lchown properly, since 2.0.x +# can't do that. Similarly, if you compile uClibc vs Linux 2.4.x kernel headers, +# but then run on Linux 2.0.x, lchown will be compiled into uClibc, but won't +# work at all. You have been warned. +KERNEL_SOURCE=/usr/src/linux + +# Set this to `false' if your CPU doesn't have a memory management unit (MMU). +# Set it to `true' otherwise. +HAS_MMU = false + +# Set this to `false' if you don't have/need basic floating point support +# support in libc (strtod, printf, scanf). Set it to `true' otherwise. +# Note: If not true, Rules.mak disables libm as well. +HAS_FLOATING_POINT = false + +# Set this to `false' if you don't have/need float functions in libm. +# Set it to `true' otherwise, and make sure HAS_FLOATING_POINT is true as well. +HAS_LIBM_FLOAT = false + +# Set this to `false' if you don't have/need double functions in libm. +# Set it to `true' otherwise, and make sure HAS_FLOATING_POINT is true as well. +HAS_LIBM_DOUBLE = false + +# Set this to `false' if you don't have/need long double functions in libm. +# Set it to `true' otherwise, and make sure HAS_FLOATING_POINT is true as well. +HAS_LIBM_LONG_DOUBLE = false + +# Set this to `false' if you don't have/need "(unsigned) long long int" support. +# Set it to `true' otherwise. +# Affects *printf and *scanf functions. +# Also omits strto(u)ll, and (u)lltostr from the library if `false'. +HAS_LONG_LONG = false + +# Set this to `false' if you don't have/need locale support; `true' otherwise. +# Note: Currently only affects the ctype functions. You must also generate +# a locale file for anything but the C locale. See directory extra/locale for +# a utility to do so. Also see the following option. +HAS_LOCALE = false + +# Set this to the path of your uClibc locale file directory. +# Warning! This must be different than the glibc locale directory to avoid +# name conflicts, as the locale files are entirely different in format! +LOCALE_DIR = "/usr/share/uClibc-locale/" + +# This specifies which malloc implementation is used. +# "malloc-simple" is very, very small, but is also very, very dumb +# and does not try to make good use of memory or clean up after itself. +# +# "malloc" on the other hand is a bit bigger, but is pretty smart thereby +# minimizing memory wastage and reusing already allocated memory. This +# can be lots faster and safer IMHO. +# +# "malloc-930716" is from libc-5.3.12 and was/is the standard gnu malloc. +# It is actually smaller than "malloc", at least on i386. Right now, it +# only works on i386 (and maybe m68k) because it needs sbrk. +MALLOC = malloc-simple +#MALLOC = malloc +#MALLOC = malloc-930716 + +# If you want to collect common syscall code into one function, set to this to +# `true'. Set it to false otherwise. +# On i386 this saves about than 2.8k over all syscalls. +# The idea came from the implementation in dietlibc. +# At present, only affects i386. +UNIFIED_SYSCALL = false + +# If you want large file summit support (greater then 2 Gib), +# turn this on. This has no effect unless your kernel supports +# lfs. This currently does nothing, but may someday... +DOLFS = false + +# If you want to include RPC support, enable this. RPC is almost never used +# for anything except NFS support, so unless you plan to use NFS, leave this +# disabled. This is off by default. +INCLUDE_RPC = true + +# Installation location. For the default uClinux installation from +# Lineo for m68k, it should be: +# /opt/uClinux/m68k-pic-coff +# so includes installed in: /opt/uClinux/m68k-pic-coff/include +# libc.a and crt0.o in: /opt/uClinux/m68k-pic-coff/lib +# +# For ARM it should be: +# /opt/uClinux/arm-pic-elf +# so includes installed in: /opt/uClinux/arm-pic-elf/include +# libc.a and crt0.o in: /opt/uClinux/arm-pic-elf/lib +# +# For x86 this should be: +# /usr/i386-linux-uclibc +# so includes installed in: /usr/i386-linux-uclibc/include +# libc.a, libc.so.#, crt0.o in: /usr/i386-linux-uclibc/lib +# +INSTALL_DIR = /opt/uClinux/$(TARGET_ARCH)-pic-elf + +# +# ARCH_CFLAGS if your have something special to add to the CFLAGS +# +ARCH_CFLAGS = -Wa,--bitwise-or +# +# this is needed for 2.4 m68knommu builds +# +ARCH_CFLAGS2 = -I$(KERNEL_SOURCE)/include +# +# get this from elsewhere, maybe +# +OPTIMIZATION = $(DEBUG_CFLAGS) + diff --git a/extra/Configs/Config.mips b/extra/Configs/Config.mips new file mode 100644 index 000000000..a3a45c623 --- /dev/null +++ b/extra/Configs/Config.mips @@ -0,0 +1,148 @@ +# Library Configuration rules for uClibc +# +# This file contains rules which are shared between multiple Makefiles. Feel +# free to adjust to taste... +# -Erik Andersen <andersen@lineo.com> <andersee@debian.org> +# +# Copyright (C) 2000 by Lineo, inc. +# +# This program is free software; you can redistribute it and/or modify it under +# the terms of the GNU Library General Public License as published by the Free +# Software Foundation; either version 2 of the License, or (at your option) any +# later version. +# +# This program is distributed in the hope that it will be useful, but WITHOUT +# ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS +# FOR A PARTICULAR PURPOSE. See the GNU Library General Public License for more +# details. +# +# You should have received a copy of the GNU Library General Public License +# along with this program; if not, write to the Free Software Foundation, Inc., +# 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA +# +# Derived in part from the Linux-8086 C library, the GNU C Library, and several +# other sundry sources. Files within this library are copyright by their +# respective copyright holders. + +# What arch do you want to compile for... +#TARGET_ARCH=arm +#TARGET_ARCH=i386 +#TARGET_ARCH=m68k +#TARGET_ARCH=powerpc +#TARGET_ARCH=sh +#TARGET_ARCH=sparc +TARGET_ARCH=mipsel + +# If you are running a cross compiler, you may want to set this +# to something more interesting... +NATIVE_CC = gcc +CROSS = mipsel-linux- +CC = $(CROSS)gcc +AR = $(CROSS)ar +LD = $(CROSS)ld +STRIPTOOL = $(CROSS)strip +#STRIPTOOL = /bin/true + +# Set the following to `true' to make a debuggable build, and `false' for +# production builds. +DODEBUG = false + +# Compiler warnings you want to see +WARNINGS=-Wall + +# Note that the kernel source you use to compile with should be the same as the +# Linux kernel you run your apps on. uClibc doesn't even try to achieve binary +# compatibility across kernel versions. So don't expect, for example, uClibc +# compiled with Linux kernel 2.0.x to implement lchown properly, since 2.0.x +# can't do that. Similarly, if you compile uClibc vs Linux 2.4.x kernel headers, +# but then run on Linux 2.0.x, lchown will be compiled into uClibc, but won't +# work at all. You have been warned. +KERNEL_SOURCE=/home/ds/mips/linux-2.4.3-pre3-idt-rthal + +# Set this to `false' if your CPU doesn't have a memory management unit (MMU). +# Set it to `true' otherwise. +HAS_MMU = false + +# Set this to `false' if you don't have/need basic floating point support +# support in libc (strtod, printf, scanf). Set it to `true' otherwise. +# Note: If not true, Rules.mak disables libm as well. +HAS_FLOATING_POINT = true + +# Set this to `false' if you don't have/need float functions in libm. +# Set it to `true' otherwise, and make sure HAS_FLOATING_POINT is true as well. +HAS_LIBM_FLOAT = false + +# Set this to `false' if you don't have/need double functions in libm. +# Set it to `true' otherwise, and make sure HAS_FLOATING_POINT is true as well. +HAS_LIBM_DOUBLE = false + +# Set this to `false' if you don't have/need long double functions in libm. +# Set it to `true' otherwise, and make sure HAS_FLOATING_POINT is true as well. +HAS_LIBM_LONG_DOUBLE = false + +# Set this to `false' if you don't have/need "(unsigned) long long int" support. +# Set it to `true' otherwise. +# Affects *printf and *scanf functions. +# Also omits strto(u)ll, and (u)lltostr from the library if `false'. +HAS_LONG_LONG = true + +# Set this to `false' if you don't have/need locale support; `true' otherwise. +# Note: Currently only affects the ctype functions. You must also generate +# a locale file for anything but the C locale. See directory extra/locale for +# a utility to do so. Also see the following option. +HAS_LOCALE = false + +# Set this to the path of your uClibc locale file directory. +# Warning! This must be different than the glibc locale directory to avoid +# name conflicts, as the locale files are entirely different in format! +LOCALE_DIR = "/usr/share/uClibc-locale/" + +# This specifies which malloc implementation is used. +# "malloc-simple" is very, very small, but is also very, very dumb +# and does not try to make good use of memory or clean up after itself. +# +# "malloc" on the other hand is a bit bigger, but is pretty smart thereby +# minimizing memory wastage and reusing already allocated memory. This +# can be lots faster and safer IMHO. +# +# "malloc-930716" is from libc-5.3.12 and was/is the standard gnu malloc. +# It is actually smaller than "malloc", at least on i386. Right now, it +# only works on i386 (and maybe m68k) because it needs sbrk. +#MALLOC = malloc-simple +MALLOC = malloc +#MALLOC = malloc-930716 + +# If you want to collect common syscall code into one function, set to this to +# `true'. Set it to false otherwise. +# On i386 this saves about than 2.8k over all syscalls. +# The idea came from the implementation in dietlibc. +# At present, only affects i386. +UNIFIED_SYSCALL = false + +# If you want large file summit support (greater then 2 Gib), +# turn this on. This has no effect unless your kernel supports +# lfs. This currently does nothing, but may someday... +DOLFS = false + +# If you want to include RPC support, enable this. RPC is almost never used +# for anything except NFS support, so unless you plan to use NFS, leave this +# disabled. This is off by default. +INCLUDE_RPC = false + +# Installation location. For the default uClinux installation from +# Lineo for m68k, it should be: +# /opt/uClinux/m68k-pic-coff +# so includes installed in: /opt/uClinux/m68k-pic-coff/include +# libc.a and crt0.o in: /opt/uClinux/m68k-pic-coff/lib +# +# For ARM it should be: +# /opt/uClinux/arm-pic-elf +# so includes installed in: /opt/uClinux/arm-pic-elf/include +# libc.a and crt0.o in: /opt/uClinux/arm-pic-elf/lib +# +# For x86 this should be: +# /usr/i386-linux-uclibc +# so includes installed in: /usr/i386-linux-uclibc/include +# libc.a, libc.so.#, crt0.o in: /usr/i386-linux-uclibc/lib +# +INSTALL_DIR = /usr/$(TARGET_ARCH)-linux-uclibc diff --git a/extra/Configs/Config.mipsel b/extra/Configs/Config.mipsel new file mode 100644 index 000000000..a3a45c623 --- /dev/null +++ b/extra/Configs/Config.mipsel @@ -0,0 +1,148 @@ +# Library Configuration rules for uClibc +# +# This file contains rules which are shared between multiple Makefiles. Feel +# free to adjust to taste... +# -Erik Andersen <andersen@lineo.com> <andersee@debian.org> +# +# Copyright (C) 2000 by Lineo, inc. +# +# This program is free software; you can redistribute it and/or modify it under +# the terms of the GNU Library General Public License as published by the Free +# Software Foundation; either version 2 of the License, or (at your option) any +# later version. +# +# This program is distributed in the hope that it will be useful, but WITHOUT +# ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS +# FOR A PARTICULAR PURPOSE. See the GNU Library General Public License for more +# details. +# +# You should have received a copy of the GNU Library General Public License +# along with this program; if not, write to the Free Software Foundation, Inc., +# 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA +# +# Derived in part from the Linux-8086 C library, the GNU C Library, and several +# other sundry sources. Files within this library are copyright by their +# respective copyright holders. + +# What arch do you want to compile for... +#TARGET_ARCH=arm +#TARGET_ARCH=i386 +#TARGET_ARCH=m68k +#TARGET_ARCH=powerpc +#TARGET_ARCH=sh +#TARGET_ARCH=sparc +TARGET_ARCH=mipsel + +# If you are running a cross compiler, you may want to set this +# to something more interesting... +NATIVE_CC = gcc +CROSS = mipsel-linux- +CC = $(CROSS)gcc +AR = $(CROSS)ar +LD = $(CROSS)ld +STRIPTOOL = $(CROSS)strip +#STRIPTOOL = /bin/true + +# Set the following to `true' to make a debuggable build, and `false' for +# production builds. +DODEBUG = false + +# Compiler warnings you want to see +WARNINGS=-Wall + +# Note that the kernel source you use to compile with should be the same as the +# Linux kernel you run your apps on. uClibc doesn't even try to achieve binary +# compatibility across kernel versions. So don't expect, for example, uClibc +# compiled with Linux kernel 2.0.x to implement lchown properly, since 2.0.x +# can't do that. Similarly, if you compile uClibc vs Linux 2.4.x kernel headers, +# but then run on Linux 2.0.x, lchown will be compiled into uClibc, but won't +# work at all. You have been warned. +KERNEL_SOURCE=/home/ds/mips/linux-2.4.3-pre3-idt-rthal + +# Set this to `false' if your CPU doesn't have a memory management unit (MMU). +# Set it to `true' otherwise. +HAS_MMU = false + +# Set this to `false' if you don't have/need basic floating point support +# support in libc (strtod, printf, scanf). Set it to `true' otherwise. +# Note: If not true, Rules.mak disables libm as well. +HAS_FLOATING_POINT = true + +# Set this to `false' if you don't have/need float functions in libm. +# Set it to `true' otherwise, and make sure HAS_FLOATING_POINT is true as well. +HAS_LIBM_FLOAT = false + +# Set this to `false' if you don't have/need double functions in libm. +# Set it to `true' otherwise, and make sure HAS_FLOATING_POINT is true as well. +HAS_LIBM_DOUBLE = false + +# Set this to `false' if you don't have/need long double functions in libm. +# Set it to `true' otherwise, and make sure HAS_FLOATING_POINT is true as well. +HAS_LIBM_LONG_DOUBLE = false + +# Set this to `false' if you don't have/need "(unsigned) long long int" support. +# Set it to `true' otherwise. +# Affects *printf and *scanf functions. +# Also omits strto(u)ll, and (u)lltostr from the library if `false'. +HAS_LONG_LONG = true + +# Set this to `false' if you don't have/need locale support; `true' otherwise. +# Note: Currently only affects the ctype functions. You must also generate +# a locale file for anything but the C locale. See directory extra/locale for +# a utility to do so. Also see the following option. +HAS_LOCALE = false + +# Set this to the path of your uClibc locale file directory. +# Warning! This must be different than the glibc locale directory to avoid +# name conflicts, as the locale files are entirely different in format! +LOCALE_DIR = "/usr/share/uClibc-locale/" + +# This specifies which malloc implementation is used. +# "malloc-simple" is very, very small, but is also very, very dumb +# and does not try to make good use of memory or clean up after itself. +# +# "malloc" on the other hand is a bit bigger, but is pretty smart thereby +# minimizing memory wastage and reusing already allocated memory. This +# can be lots faster and safer IMHO. +# +# "malloc-930716" is from libc-5.3.12 and was/is the standard gnu malloc. +# It is actually smaller than "malloc", at least on i386. Right now, it +# only works on i386 (and maybe m68k) because it needs sbrk. +#MALLOC = malloc-simple +MALLOC = malloc +#MALLOC = malloc-930716 + +# If you want to collect common syscall code into one function, set to this to +# `true'. Set it to false otherwise. +# On i386 this saves about than 2.8k over all syscalls. +# The idea came from the implementation in dietlibc. +# At present, only affects i386. +UNIFIED_SYSCALL = false + +# If you want large file summit support (greater then 2 Gib), +# turn this on. This has no effect unless your kernel supports +# lfs. This currently does nothing, but may someday... +DOLFS = false + +# If you want to include RPC support, enable this. RPC is almost never used +# for anything except NFS support, so unless you plan to use NFS, leave this +# disabled. This is off by default. +INCLUDE_RPC = false + +# Installation location. For the default uClinux installation from +# Lineo for m68k, it should be: +# /opt/uClinux/m68k-pic-coff +# so includes installed in: /opt/uClinux/m68k-pic-coff/include +# libc.a and crt0.o in: /opt/uClinux/m68k-pic-coff/lib +# +# For ARM it should be: +# /opt/uClinux/arm-pic-elf +# so includes installed in: /opt/uClinux/arm-pic-elf/include +# libc.a and crt0.o in: /opt/uClinux/arm-pic-elf/lib +# +# For x86 this should be: +# /usr/i386-linux-uclibc +# so includes installed in: /usr/i386-linux-uclibc/include +# libc.a, libc.so.#, crt0.o in: /usr/i386-linux-uclibc/lib +# +INSTALL_DIR = /usr/$(TARGET_ARCH)-linux-uclibc diff --git a/extra/Configs/Config.powerpc b/extra/Configs/Config.powerpc new file mode 100644 index 000000000..07b2efc5f --- /dev/null +++ b/extra/Configs/Config.powerpc @@ -0,0 +1,147 @@ +# Library Configuration rules for uClibc +# +# This file contains rules which are shared between multiple Makefiles. Feel +# free to adjust to taste... +# -Erik Andersen <andersen@lineo.com> <andersee@debian.org> +# +# Copyright (C) 2000 by Line |