Add an SH port done by Jean-Yves Avenard of Hewlett-Packard - Embedded

and Personal Systems.  Thanks!
 -Erik

1 files changed, 204 insertions, 46 deletions

diff --git a/include/stdarg.h b/include/stdarg.h
index 321e6646e..24f338319 100644
--- a/include/stdarg.h
+++ b/include/stdarg.h
@@ -1,47 +1,205 @@
- /*
-  * @(#) stdarg.h 1.2 91/11/30 21:10:39
-  * 
-  * Sample stdarg.h file for use with the unproto filter.
-  * 
-  * This file serves two purposes.
-  * 
-  * 1 - As an include file for use with ANSI-style C source that implements
-  * variadic functions.
-  * 
-  * 2 - To configure the unproto filter itself. If the _VA_ALIST_ macro is
-  * defined, its value will appear in the place of the "..." in argument
-  * lists of variadic function *definitions* (not declarations).
-  * 
-  * Compilers that pass arguments via the stack can use the default code at the
-  * end of this file (this usually applies for the VAX, MC68k and 80*86
-  * architectures).
-  * 
-  * RISC-based systems often need special tricks. An example of the latter is
-  * given for the SPARC architecture. Read your /usr/include/varargs.h for
-  * more information.
-  * 
-  * You can use the varargs.c program provided with the unproto package to
-  * verify that the stdarg.h file has been set up correctly.
-  */
-
-#ifndef __STDARG_H
-#define __STDARG_H
-
-#ifdef sparc
-#  define _VA_ALIST_		"__builtin_va_alist"
-   typedef char *va_list;
-#  define va_start(ap, p)	(ap = (char *) &__builtin_va_alist)
-#  define va_arg(ap, type)	((type *) __builtin_va_arg_incr((type *) ap))[0]
-#  define va_end(ap)
-#else /* vax, mc68k, 80*86 */
-   typedef char *va_list;
-#  define va_start(ap, p)	(ap = (char *) (&(p)+1))
-#  define va_arg(ap, type)	((type *) (ap += sizeof(type)))[-1]
-#  define va_end(ap)
-#endif
-
-#endif /* __STDARG_H */
-
-#if __FIRST_ARG_IN_AX__
-#error First arg is in a register, stdarg.h cannot take its address
+/* stdarg.h for GNU.
+   Note that the type used in va_arg is supposed to match the
+   actual type **after default promotions**.
+   Thus, va_arg (..., short) is not valid.  */
+
+#ifndef _STDARG_H
+#ifndef _ANSI_STDARG_H_
+#ifndef __need___va_list
+#define _STDARG_H
+#define _ANSI_STDARG_H_
+#endif /* not __need___va_list */
+#undef __need___va_list
+
+#ifdef __clipper__
+#include "va-clipper.h"
+#else
+#ifdef __m88k__
+#include "va-m88k.h"
+#else
+#ifdef __i860__
+#include "va-i860.h"
+#else
+#ifdef __hppa__
+#include "va-pa.h"
+#else
+#ifdef __mips__
+#include "va-mips.h"
+#else
+#ifdef __sparc__
+#include "va-sparc.h"
+#else
+#ifdef __i960__
+#include "va-i960.h"
+#else
+#ifdef __alpha__
+#include "va-alpha.h"
+#else
+#if defined (__H8300__) || defined (__H8300H__) || defined (__H8300S__)
+#include "va-h8300.h"
+#else
+#if defined (__PPC__) && (defined (_CALL_SYSV) || defined (_WIN32))
+#include "va-ppc.h"
+#else
+#ifdef __arc__
+#include "va-arc.h"
+#else
+#ifdef __M32R__
+#include "va-m32r.h"
+#else
+#ifdef __sh__
+#include "va-sh.h"
+#else
+#ifdef __mn10300__
+#include "va-mn10300.h"
+#else
+#ifdef __mn10200__
+#include "va-mn10200.h"
+#else
+#ifdef __v850__
+#include "va-v850.h"
+#else
+
+/* Define __gnuc_va_list.  */
+
+#ifndef __GNUC_VA_LIST
+#define __GNUC_VA_LIST
+#if defined(__svr4__) || defined(_AIX) || defined(_M_UNIX) || defined(__NetBSD__)
+typedef char *__gnuc_va_list;
+#else
+typedef void *__gnuc_va_list;
+#endif
+#endif
+
+/* Define the standard macros for the user,
+   if this invocation was from the user program.  */
+#ifdef _STDARG_H
+
+/* Amount of space required in an argument list for an arg of type TYPE.
+   TYPE may alternatively be an expression whose type is used.  */
+
+#if defined(sysV68)
+#define __va_rounded_size(TYPE)  \
+  (((sizeof (TYPE) + sizeof (short) - 1) / sizeof (short)) * sizeof (short))
+#else
+#define __va_rounded_size(TYPE)  \
+  (((sizeof (TYPE) + sizeof (int) - 1) / sizeof (int)) * sizeof (int))
 #endif
+
+#define va_start(AP, LASTARG) 						\
+ (AP = ((__gnuc_va_list) __builtin_next_arg (LASTARG)))
+
+#undef va_end
+void va_end (__gnuc_va_list);		/* Defined in libgcc.a */
+#define va_end(AP)	((void)0)
+
+/* We cast to void * and then to TYPE * because this avoids
+   a warning about increasing the alignment requirement.  */
+
+#if (defined (__arm__) && ! defined (__ARMEB__)) || defined (__i386__) || defined (__i860__) || defined (__ns32000__) || defined (__vax__)
+/* This is for little-endian machines; small args are padded upward.  */
+#define va_arg(AP, TYPE)						\
+ (AP = (__gnuc_va_list) ((char *) (AP) + __va_rounded_size (TYPE)),	\
+  *((TYPE *) (void *) ((char *) (AP) - __va_rounded_size (TYPE))))
+#else /* big-endian */
+/* This is for big-endian machines; small args are padded downward.  */
+#define va_arg(AP, TYPE)						\
+ (AP = (__gnuc_va_list) ((char *) (AP) + __va_rounded_size (TYPE)),	\
+  *((TYPE *) (void *) ((char *) (AP)					\
+		       - ((sizeof (TYPE) < __va_rounded_size (char)	\
+			   ? sizeof (TYPE) : __va_rounded_size (TYPE))))))
+#endif /* big-endian */
+
+/* Copy __gnuc_va_list into another variable of this type.  */
+#define __va_copy(dest, src) (dest) = (src)
+
+#endif /* _STDARG_H */
+
+#endif /* not v850 */
+#endif /* not mn10200 */
+#endif /* not mn10300 */
+#endif /* not sh */
+#endif /* not m32r */
+#endif /* not arc */
+#endif /* not powerpc with V.4 calling sequence */
+#endif /* not h8300 */
+#endif /* not alpha */
+#endif /* not i960 */
+#endif /* not sparc */
+#endif /* not mips */
+#endif /* not hppa */
+#endif /* not i860 */
+#endif /* not m88k */
+#endif /* not clipper */
+
+#ifdef _STDARG_H
+/* Define va_list, if desired, from __gnuc_va_list. */
+/* We deliberately do not define va_list when called from
+   stdio.h, because ANSI C says that stdio.h is not supposed to define
+   va_list.  stdio.h needs to have access to that data type, 
+   but must not use that name.  It should use the name __gnuc_va_list,
+   which is safe because it is reserved for the implementation.  */
+
+#ifdef _HIDDEN_VA_LIST  /* On OSF1, this means varargs.h is "half-loaded".  */
+#undef _VA_LIST
+#endif
+
+#ifdef _BSD_VA_LIST
+#undef _BSD_VA_LIST
+#endif
+
+#if defined(__svr4__) || (defined(_SCO_DS) && !defined(__VA_LIST))
+/* SVR4.2 uses _VA_LIST for an internal alias for va_list,
+   so we must avoid testing it and setting it here.
+   SVR4 uses _VA_LIST as a flag in stdarg.h, but we should
+   have no conflict with that.  */
+#ifndef _VA_LIST_
+#define _VA_LIST_
+#ifdef __i860__
+#ifndef _VA_LIST
+#define _VA_LIST va_list
+#endif
+#endif /* __i860__ */
+typedef __gnuc_va_list va_list;
+#ifdef _SCO_DS
+#define __VA_LIST
+#endif
+#endif /* _VA_LIST_ */
+#else /* not __svr4__ || _SCO_DS */
+
+/* The macro _VA_LIST_ is the same thing used by this file in Ultrix.
+   But on BSD NET2 we must not test or define or undef it.
+   (Note that the comments in NET 2's ansi.h
+   are incorrect for _VA_LIST_--see stdio.h!)  */
+#if !defined (_VA_LIST_) || defined (__BSD_NET2__) || defined (____386BSD____) || defined (__bsdi__) || defined (__sequent__) || defined (__FreeBSD__) || defined(WINNT)
+/* The macro _VA_LIST_DEFINED is used in Windows NT 3.5  */
+#ifndef _VA_LIST_DEFINED
+/* The macro _VA_LIST is used in SCO Unix 3.2.  */
+#ifndef _VA_LIST
+/* The macro _VA_LIST_T_H is used in the Bull dpx2  */
+#ifndef _VA_LIST_T_H
+typedef __gnuc_va_list va_list;
+#endif /* not _VA_LIST_T_H */
+#endif /* not _VA_LIST */
+#endif /* not _VA_LIST_DEFINED */
+#if !(defined (__BSD_NET2__) || defined (____386BSD____) || defined (__bsdi__) || defined (__sequent__) || defined (__FreeBSD__))
+#define _VA_LIST_
+#endif
+#ifndef _VA_LIST
+#define _VA_LIST
+#endif
+#ifndef _VA_LIST_DEFINED
+#define _VA_LIST_DEFINED
+#endif
+#ifndef _VA_LIST_T_H
+#define _VA_LIST_T_H
+#endif
+
+#endif /* not _VA_LIST_, except on certain systems */
+
+#endif /* not __svr4__ */
+
+#endif /* _STDARG_H */
+
+#endif /* not _ANSI_STDARG_H_ */
+#endif /* not _STDARG_H */