summaryrefslogtreecommitdiff
path: root/target/m68k
AgeCommit message (Collapse)Author
2025-04-26m68k: enable fenv support in uClibc-ng configWaldemar Brodkorb
2025-03-04m68k: use malloc-standard for MMU targetsWaldemar Brodkorb
2025-03-04arcturus-uc5328: no kernel add serial supportWaldemar Brodkorb
2025-03-03m68k: enable nfsrootWaldemar Brodkorb
2025-03-02arcturus-uc5328: add basic infraWaldemar Brodkorb
2025-01-07target: linux: config: Set COMPAT_32BIT_TIME on 32bit architecturesPhil Sutter
Without it, on these architectures 'lvm pvscan' will busy-loop printing: | io_getevents failed: No such file or directory The symbol is defined in kernel's arch/Kconfig with 'default !64BIT || COMPAT'. Introduce Config.in.compat which has the symbol default to y unless a known 64bit ADK_TARGET_ARCH is enabled. Drop the symbol from all target/*/kernel/* for which the default applies. On 64bit systems, enabling this symbol is probably useful to provide comaptibility towards 32bit user space. Not sure if this is a possible choice in OpenADK, but just in case the symbol was not removed from: - target/aarch64/kernel/raspberry-pi4-64 - target/mips64/kernel/qemu-mips64 - target/riscv64/kernel/qemu-riscv64 Another case is targets explicitly having the symbol disabled, namely kvx. Given that the two kernel configs in question are full copies of the kernel-generated one, they are likely not a deliberate choice and thus removed as well. Signed-off-by: Phil Sutter <phil@nwl.cc>
2024-03-03uclibc-ng: refresh configs, enable time64 for architectures supporting itWaldemar Brodkorb
2024-01-18support nommu with ELF binariesWaldemar Brodkorb
2023-08-18enable 32Bit compat for aranymWaldemar Brodkorb
2023-08-15m68k: use more RAM by defaultWaldemar Brodkorb
2023-08-15m68k: qemu virt depends on m68040 cpuWaldemar Brodkorb
2023-08-13m68k: add qemu virt support, seems more reliable at the moment then q800Waldemar Brodkorb
2023-01-24enable CONFIG_COMPAT_32BIT_TIMEWaldemar Brodkorb
2019-10-10m68k: unbreak coldfire build with defconfigWaldemar Brodkorb
2018-05-25rework hardware and C library settingsWaldemar Brodkorb
Make the menu system for configuration more intuitive. First choose operating system, then hardware, starting with architecture. Then choose either generic or a sample system. When choosing a sample be more strict in case of MMU or Endianess selection, so a misconfiguration isn't possible. Furthermore put a new top level menu for C library configuration and add Binary format, Instruction set, version selection, float type and any C library specific options. Refactor the duplicate definition of Qemu system versatile and Synopsys NSIM.
2018-01-02uclibc-ng: remove COMPAT_ATEXITWaldemar Brodkorb
2017-12-31m68k: uClibc-ng now support NPTL/TLSWaldemar Brodkorb
2017-06-26uclibc-ng: update default configsWaldemar Brodkorb
2016-12-31uclibc-ng: update default configsWaldemar Brodkorb
2016-12-04uclibc-ng: refresh configs, enable sha512Waldemar Brodkorb
2016-10-30linux: update older kernelsWaldemar Brodkorb
2016-10-30linux: update to 3.18.44Waldemar Brodkorb
2016-10-30linux: update to 4.1.35Waldemar Brodkorb
2016-09-29alix1c: fix keyboard support, add SERIO symbols and cleanup aranym/lemote stuffWaldemar Brodkorb
2016-08-15linux: update 4.x kernel, add m68k patch and allow one memory flatWaldemar Brodkorb
2016-06-19linux: update to 3.14.72, add working solidrun patchWaldemar Brodkorb
2016-05-29uClibc-ng: update to 1.0.15, refresh configsWaldemar Brodkorb
Signed-off-by: Waldemar Brodkorb <wbx@openadk.org>
2016-05-16bump linux kernel versionsWaldemar Brodkorb
2016-05-09coldfire: move serial driver to Config.in.serialWaldemar Brodkorb
2016-05-03update rpi kernel patch, add mkknlimg back, more fixesWaldemar Brodkorb
2016-04-28linux: bump all kernelsWaldemar Brodkorb
2016-04-22cleanup patch, remove orig fileWaldemar Brodkorb
2016-04-01linux: update to 4.1.20, add solidrun patch for 4.4.6Waldemar Brodkorb
2016-03-19qemu-m68k-q800: add disk supportWaldemar Brodkorb
2016-03-16disable uClibc-ng obstack, gdb/binutils has its own copyWaldemar Brodkorb
2016-03-12uclibc-ng: disable long double math in default configWaldemar Brodkorb
2016-03-07rework menu based config systemWaldemar Brodkorb
After the addition of bare metal toolchains the menu system allowed to create non-valid configurations. I reworked it so we can also add other operating system support if we wish. So first you choose your operating system, then your architecture and endianess, after that your embedded system, emulator or generic device and then you choose your task you want to run. Tasks may be toolchain, a new appliance/application or some preconfigured sets of packages and configurations as kodi, mpd, firefox and more. The tasks are limited to a plausible choice of hardware and software. Deduplicate CPU configuration. You don't wanna compile Kodi for a H8/300 microcontroller ;)
2016-02-07uclibc-ng: simplify config, only use uclibc-ng.config as git master is now ↵Waldemar Brodkorb
1.0 config
2016-01-24linux: update to 4.1.16Waldemar Brodkorb
2016-01-10update to uClibc-ng 1.0.11, enable argp option, refresh configsWaldemar Brodkorb
Signed-off-by: Waldemar Brodkorb <wbx@openadk.org>
2015-12-24bump kernelversionsWaldemar Brodkorb
2015-11-30linux: update 4.1.x to latest stable upstream versionWaldemar Brodkorb
2015-11-12do not allow to build broken kernel images with compressionWaldemar Brodkorb
Some targets do not support compressed kernels or initramfs. OpenADK combines both, there is no support for mixed setups. For example Kernel with gzip, initramfs with xz. Qemu-Metag f.e. can only use uncompressed initramfs. The kernel could be compressed, but mixed setup isn't available for now.
2015-11-01fix fec problem in qemu-m68k-mcf5208Waldemar Brodkorb
2015-10-25disable UCLIBC_HAS_FENV for git configs, tooWaldemar Brodkorb
2015-10-25uClibc-ng: disable UCLIBC_HAS_FENV in the default configWaldemar Brodkorb
2015-10-24add new symbol for systems with tcp/ip but without netdevice. like arc ↵Waldemar Brodkorb
simulator running test-suites with network functions
2015-10-07move patch dirs, tooWaldemar Brodkorb
2015-09-02refactor kernel mini.config.Waldemar Brodkorb
We do not need to manually set mini.config file anymore. Every target system, even Qemu emulating different models get it its own. Cleaner and simpler to add new targets.
2015-08-13kernel: make net and block support optionalWaldemar Brodkorb
generated by cgit v1.2.3 (git 2.25.1) at 2025-07-16 04:10:47 +0000