19 files changed, 98 insertions, 26 deletions
diff --git a/target/arm/Makefile b/target/arm/Makefile
index 77148e261..a652003eb 100644
--- a/target/arm/Makefile
+++ b/target/arm/Makefile
@@ -70,6 +70,12 @@ ifeq ($(ADK_TARGET_SYSTEM_QEMU_ARM)$(ADK_TARGET_SYSTEM_QEMU_ARMHF),y)
 	@echo 'qemu-system-arm -M $(MACH) -nographic $(NET) -kernel $(FW_DIR)/$(TARGET_KERNEL) -hda qemu-${CPU_ARCH}.img'
 endif
 endif
+ifeq ($(ADK_TARGET_FS),initramfsarchive)
+imageinstall: $(FW_DIR)/$(ROOTFSTARBALL)
+	@cp $(KERNEL) $(FW_DIR)/$(TARGET_KERNEL)
+	@echo 'The kernel file is: $(FW_DIR)/${TARGET_KERNEL}'
+	@echo "The RootFS tarball is: $(FW_DIR)/$(ROOTFSTARBALL)"
+endif
 ifeq ($(ADK_TARGET_FS),initramfs)
 imageinstall: $(FW_DIR)/$(INITRAMFS)
 	@cp $(KERNEL) $(FW_DIR)/$(TARGET_KERNEL)
diff --git a/target/config/Config.in b/target/config/Config.in
index ee6aaa695..79f067bf3 100644
--- a/target/config/Config.in
+++ b/target/config/Config.in
@@ -251,7 +251,6 @@ config ADK_TARGET_QEMU_ARM_MODEL_SPITZ
 	select ADK_soft_float
 	select ADK_eabi
 	select ADK_CPU_XSCALE
-	select ADK_TARGET_WITH_VGA
 	depends on ADK_TARGET_SYSTEM_QEMU_ARM
 
 endchoice
@@ -259,6 +258,7 @@ endchoice
 choice
 prompt "Qemu Emulation with permanent storage device (disk/flash)"
 depends on ADK_HARDWARE_QEMU
+default ADK_TARGET_QEMU_WITH_BLOCK if ADK_TARGET_ROOTFS_ARCHIVE
 
 config ADK_TARGET_QEMU_WITHOUT_BLOCK
 	boolean "disabled"
@@ -304,7 +304,13 @@ endchoice
 
 choice
 prompt "Qemu Emulation using VirtIO drivers"
-depends on ADK_TARGET_SYSTEM_QEMU_SPARC64
+depends on ADK_TARGET_SYSTEM_QEMU_SPARC64 || \
+		ADK_TARGET_SYSTEM_QEMU_I686 || \
+		ADK_TARGET_SYSTEM_QEMU_X86_64
+default ADK_TARGET_QEMU_WITH_VIRTIO if ADK_TARGET_SYSTEM_QEMU_SPARC64
+
+config ADK_TARGET_QEMU_WITHOUT_VIRTIO
+	boolean "disabled"
 
 config ADK_TARGET_QEMU_WITH_VIRTIO
 	boolean "enabled"
@@ -314,9 +320,6 @@ config ADK_TARGET_QEMU_WITH_VIRTIO
 	select ADK_KERNEL_VIRTIO_NET
 	select ADK_KERNEL_VIRTIO_BLK
 
-config ADK_TARGET_QEMU_WITHOUT_VIRTIO
-	boolean "disabled"
-
 endchoice
 
 
@@ -757,6 +760,7 @@ config ADK_TARGET_SUFFIX
 choice
 prompt "Target firmware type"
 depends on !ADK_CHOOSE_TARGET_SYSTEM && !ADK_CHOOSE_TARGET_ARCH && !ADK_TOOLCHAIN
+default ADK_TARGET_ROOTFS_INITRAMFSARCHIVE if ADK_PKG_TEST
 default ADK_TARGET_ROOTFS_ARCHIVE
 
 config ADK_TARGET_ROOTFS_INITRAMFS
@@ -897,10 +901,17 @@ config ADK_TARGET_ROOTFS_ISO
 	help
 	  Use this option to create a bootable ISO image.
 
+config ADK_TARGET_ROOTFS_INITRAMFSARCHIVE
+	bool "Archive usable for initramfs creation"
+	help
+	  Use this option if your palnning to create a initramfs,
+	  useful for adk-test-framework.
+
 config ADK_TARGET_ROOTFS_ARCHIVE
 	bool "Archive usable for different filesystems"
 	select ADK_HOST_NEED_GENEXT2FS if ADK_HARDWARE_QEMU
 	select ADK_KERNEL_EXT2_FS if ADK_HARDWARE_QEMU
+	select ADK_TARGET_QEMU_WITH_BLOCK if ADK_HARDWARE_QEMU
 	help
 	  Use this option if your root filesystem is ext2/ext3/ext4/xfs.
 
diff --git a/target/m68k/Makefile b/target/m68k/Makefile
index 282cb5496..d68393b84 100644
--- a/target/m68k/Makefile
+++ b/target/m68k/Makefile
@@ -15,6 +15,12 @@ imageinstall: $(FW_DIR)/$(ROOTFSTARBALL)
 	@echo 'The kernel file is: $(FW_DIR)/${TARGET_KERNEL}'
 	@echo "The RootFS tarball is: $(FW_DIR)/$(ROOTFSTARBALL)"
 endif
+ifeq ($(ADK_TARGET_FS),initramfsarchive)
+imageinstall: $(FW_DIR)/$(ROOTFSTARBALL)
+	@cp $(KERNEL) $(FW_DIR)/$(TARGET_KERNEL)
+	@echo 'The kernel file is: $(FW_DIR)/${TARGET_KERNEL}'
+	@echo "The RootFS tarball is: $(FW_DIR)/$(ROOTFSTARBALL)"
+endif
 ifeq ($(ADK_TARGET_FS),initramfs)
 imageinstall: $(FW_DIR)/$(INITRAMFS)
 	@cp $(KERNEL) $(FW_DIR)/$(TARGET_KERNEL)
diff --git a/target/microblaze/Makefile b/target/microblaze/Makefile
index 74f8d3dd0..c60545e56 100644
--- a/target/microblaze/Makefile
+++ b/target/microblaze/Makefile
@@ -58,5 +58,12 @@ endif
 ifeq ($(ADK_TARGET_FS),archive)
 imageinstall: $(FW_DIR)/$(ROOTFSTARBALL)
 	@cp $(KERNEL) $(FW_DIR)/$(TARGET_KERNEL)
+	@echo 'The kernel file is: $(FW_DIR)/${TARGET_KERNEL}'
+	@echo "The RootFS tarball is: $(FW_DIR)/$(ROOTFSTARBALL)"
+endif
+ifeq ($(ADK_TARGET_FS),initramfsarchive)
+imageinstall: $(FW_DIR)/$(ROOTFSTARBALL)
+	@cp $(KERNEL) $(FW_DIR)/$(TARGET_KERNEL)
+	@echo 'The kernel file is: $(FW_DIR)/${TARGET_KERNEL}'
 	@echo "The RootFS tarball is: $(FW_DIR)/$(ROOTFSTARBALL)"
 endif
diff --git a/target/mips/Makefile b/target/mips/Makefile
index 68c2ea0fe..9fd479d5d 100644
--- a/target/mips/Makefile
+++ b/target/mips/Makefile
@@ -112,6 +112,12 @@ ifeq ($(ADK_TARGET_SYSTEM_LEMOTE_YEELONG),y)
 	@echo "The root parameter have to be changed."
 endif
 endif
+ifeq ($(ADK_TARGET_FS),initramfsarchive)
+imageinstall: $(FW_DIR)/$(ROOTFSTARBALL)
+	@cp $(KERNEL) $(FW_DIR)/$(TARGET_KERNEL)
+	@echo 'The kernel file is: $(FW_DIR)/${TARGET_KERNEL}'
+	@echo "The RootFS tarball is: $(FW_DIR)/$(ROOTFSTARBALL)"
+endif
 ifeq ($(ADK_TARGET_FS),initramfs)
 imageinstall: $(FW_DIR)/$(INITRAMFS)
 	@cp $(KERNEL) $(FW_DIR)/$(TARGET_KERNEL)
diff --git a/target/mips/kernel/qemu-mips b/target/mips/kernel/qemu-mips
index 4f5c34fd6..3f06298bf 100644
--- a/target/mips/kernel/qemu-mips
+++ b/target/mips/kernel/qemu-mips
@@ -12,5 +12,3 @@ CONFIG_E1000=y
 CONFIG_PHYLIB=y
 CONFIG_SERIAL_8250=y
 CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_SERIAL_8250_NR_UARTS=1
-CONFIG_SERIAL_8250_RUNTIME_UARTS=1
diff --git a/target/mips/kernel/qemu-mips64 b/target/mips/kernel/qemu-mips64
index a3accc1a6..d4ef42c15 100644
--- a/target/mips/kernel/qemu-mips64
+++ b/target/mips/kernel/qemu-mips64
@@ -14,5 +14,3 @@ CONFIG_NET_VENDOR_INTEL=y
 CONFIG_E1000=y
 CONFIG_SERIAL_8250=y
 CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_SERIAL_8250_NR_UARTS=1
-CONFIG_SERIAL_8250_RUNTIME_UARTS=1
diff --git a/target/mips/kernel/qemu-mipsel b/target/mips/kernel/qemu-mipsel
index f1f7adcec..e16f008b7 100644
--- a/target/mips/kernel/qemu-mipsel
+++ b/target/mips/kernel/qemu-mipsel
@@ -12,5 +12,3 @@ CONFIG_E1000=y
 CONFIG_PHYLIB=y
 CONFIG_SERIAL_8250=y
 CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_SERIAL_8250_NR_UARTS=1
-CONFIG_SERIAL_8250_RUNTIME_UARTS=1
diff --git a/target/packages/pkg-available/test b/target/packages/pkg-available/test
index ab8e0a75c..7bbbe5310 100644
--- a/target/packages/pkg-available/test
+++ b/target/packages/pkg-available/test
@@ -4,10 +4,12 @@ config ADK_PKG_TEST
 	select ADK_PACKAGE_STRACE
 	select ADK_PACKAGE_SOCAT
 	select ADK_PACKAGE_MAKE
+	select ADK_PACKAGE_FILE
 	select ADK_KERNEL_BLK_DEV_INITRD
 	select ADK_KERNEL_COMP_XZ
 	select ADK_KERNEL_INITRAMFS_COMPRESSION_XZ
 	select ADK_SIMPLE_NETWORK_CONFIG
+	select ADK_KPACKAGE_KMOD_IPV6
 	default n
 	help
 	  Package collection used to build adk-test-framework root
diff --git a/target/ppc/Makefile b/target/ppc/Makefile
index 3085e98cc..ceb31e5f5 100644
--- a/target/ppc/Makefile
+++ b/target/ppc/Makefile
@@ -22,6 +22,12 @@ ifeq ($(ADK_HARDWARE_QEMU),y)
 	@echo 'qemu-system-ppc -M mac99 -nographic -kernel $(FW_DIR)/$(TARGET_KERNEL) qemu-${CPU_ARCH}.img'
 endif
 endif
+ifeq ($(ADK_TARGET_FS),initramfsarchive)
+imageinstall: $(FW_DIR)/$(ROOTFSTARBALL)
+	@cp $(KERNEL) $(FW_DIR)/$(TARGET_KERNEL)
+	@echo 'The kernel file is: $(FW_DIR)/${TARGET_KERNEL}'
+	@echo "The RootFS tarball is: $(FW_DIR)/$(ROOTFSTARBALL)"
+endif
 ifeq ($(ADK_TARGET_FS),initramfs)
 imageinstall: $(FW_DIR)/$(INITRAMFS)
 	@cp $(KERNEL) $(FW_DIR)/$(TARGET_KERNEL)
diff --git a/target/ppc64/Makefile b/target/ppc64/Makefile
index 2bc6e66cb..0ad0843c0 100644
--- a/target/ppc64/Makefile
+++ b/target/ppc64/Makefile
@@ -22,6 +22,12 @@ ifeq ($(ADK_HARDWARE_QEMU),y)
 	@echo 'qemu-system-ppc64 -nographic -kernel $(FW_DIR)/$(TARGET_KERNEL) qemu-${CPU_ARCH}.img'
 endif
 endif
+ifeq ($(ADK_TARGET_FS),initramfsarchive)
+imageinstall: $(FW_DIR)/$(ROOTFSTARBALL)
+	@cp $(KERNEL) $(FW_DIR)/$(TARGET_KERNEL)
+	@echo 'The kernel file is: $(FW_DIR)/${TARGET_KERNEL}'
+	@echo "The RootFS tarball is: $(FW_DIR)/$(ROOTFSTARBALL)"
+endif
 ifeq ($(ADK_TARGET_FS),initramfs)
 imageinstall: $(FW_DIR)/$(INITRAMFS)
 	@cp $(KERNEL) $(FW_DIR)/$(TARGET_KERNEL)
diff --git a/target/sh/Makefile b/target/sh/Makefile
index 3cf65f614..160ed6b74 100644
--- a/target/sh/Makefile
+++ b/target/sh/Makefile
@@ -22,6 +22,12 @@ ifneq ($(ADK_HARDWARE_QEMU),)
 	@echo 'qemu-system-${CPU_ARCH} ${QEMU_ARGS} -M r2d -kernel $(FW_DIR)/$(TARGET_KERNEL) qemu-${CPU_ARCH}.img'
 endif
 endif
+ifeq ($(ADK_TARGET_FS),initramfsarchive)
+imageinstall: $(FW_DIR)/$(ROOTFSTARBALL)
+	@cp $(KERNEL) $(FW_DIR)/$(TARGET_KERNEL)
+	@echo 'The kernel file is: $(FW_DIR)/${TARGET_KERNEL}'
+	@echo "The RootFS tarball is: $(FW_DIR)/$(ROOTFSTARBALL)"
+endif
 ifeq ($(ADK_TARGET_FS),initramfs)
 imageinstall: $(FW_DIR)/$(INITRAMFS)
 	@cp $(KERNEL) $(FW_DIR)/$(TARGET_KERNEL)
diff --git a/target/sparc/Makefile b/target/sparc/Makefile
index 6960aed4c..abe521e66 100644
--- a/target/sparc/Makefile
+++ b/target/sparc/Makefile
@@ -21,6 +21,12 @@ ifeq ($(ADK_TARGET_SYSTEM_QEMU_SPARC),y)
 	@echo 'qemu-system-sparc -M SS-5 -nographic -kernel $(FW_DIR)/$(TARGET_KERNEL) qemu-${CPU_ARCH}.img -append "root=/dev/sda1"'
 endif
 endif
+ifeq ($(ADK_TARGET_FS),initramfsarchive)
+imageinstall: $(FW_DIR)/$(ROOTFSTARBALL)
+	@cp $(KERNEL) $(FW_DIR)/$(TARGET_KERNEL)
+	@echo 'The kernel file is: $(FW_DIR)/${TARGET_KERNEL}'
+	@echo "The RootFS tarball is: $(FW_DIR)/$(ROOTFSTARBALL)"
+endif
 ifeq ($(ADK_TARGET_FS),initramfs)
 imageinstall: $(FW_DIR)/$(INITRAMFS)
 	@cp $(KERNEL) $(FW_DIR)/$(TARGET_KERNEL)
diff --git a/target/sparc64/Makefile b/target/sparc64/Makefile
index 8fe5ebbcc..0d3dc560b 100644
--- a/target/sparc64/Makefile
+++ b/target/sparc64/Makefile
@@ -9,6 +9,17 @@ include $(TOPDIR)/mk/image.mk
 
 KERNEL:=$(LINUX_DIR)/vmlinux
 
+QEMU_ARGS:=-M sun4u
+ifeq ($(ADK_TARGET_QEMU_WITH_GRAPHICS),)
+QEMU_ARGS+=-nographic
+endif
+ifeq ($(ADK_TARGET_QEMU_WITH_VIRTIO),y)
+QEMU_ARGS+=-net nic,model=virtio -net user
+ifeq ($(ADK_TARGET_FS),archive)
+QEMU_ARGS+=-drive file=qemu-${CPU_ARCH}.img,if=virtio,index=0
+endif
+endif
+
 ifeq ($(ADK_TARGET_FS),archive)
 imageinstall: $(FW_DIR)/$(ROOTFSTARBALL)
 	@cp $(KERNEL) $(FW_DIR)/${TARGET_KERNEL}
@@ -18,12 +29,14 @@ ifeq ($(ADK_TARGET_SYSTEM_QEMU_SPARC64),y)
 	@echo "Use following command to create a QEMU Image:"
 	@echo "./scripts/create.sh +g qemu-${CPU_ARCH}.img $(FW_DIR)/$(ROOTFSTARBALL)"
 	@echo "Start qemu with following command line:"
-ifeq ($(ADK_TARGET_QEMU_WITH_VIRTIO),y)
-	@echo 'qemu-system-sparc64 -nographic -kernel $(FW_DIR)/$(TARGET_KERNEL) -drive file=qemu-${CPU_ARCH}.img,if=virtio,index=0 -net nic,model=virtio -net user'
-else
-	@echo 'qemu-system-sparc64 -nographic -kernel $(FW_DIR)/$(TARGET_KERNEL) qemu-${CPU_ARCH}.img'
+	@echo 'qemu-system-sparc64 $(QEMU_ARGS) -kernel $(FW_DIR)/$(TARGET_KERNEL) qemu-${CPU_ARCH}.img'
 endif
 endif
+ifeq ($(ADK_TARGET_FS),initramfsarchive)
+imageinstall: $(FW_DIR)/$(ROOTFSTARBALL)
+	@cp $(KERNEL) $(FW_DIR)/$(TARGET_KERNEL)
+	@echo 'The kernel file is: $(FW_DIR)/${TARGET_KERNEL}'
+	@echo "The RootFS tarball is: $(FW_DIR)/$(ROOTFSTARBALL)"
 endif
 ifeq ($(ADK_TARGET_FS),initramfs)
 imageinstall: $(FW_DIR)/$(INITRAMFS)
@@ -32,7 +45,7 @@ imageinstall: $(FW_DIR)/$(INITRAMFS)
 	@echo 'The initramfs image is: ${FW_DIR}/${INITRAMFS}'
 ifeq ($(ADK_TARGET_SYSTEM_QEMU_SPARC64),y)
 	@echo "Start qemu with following command line:"
-	@echo 'qemu-system-sparc64 -nographic -kernel $(FW_DIR)/$(TARGET_KERNEL) -initrd ${FW_DIR}/${INITRAMFS}'
+	@echo 'qemu-system-sparc64 $(QEMU_ARGS) -kernel $(FW_DIR)/$(TARGET_KERNEL) -initrd ${FW_DIR}/${INITRAMFS}'
 endif
 endif
 ifeq ($(ADK_TARGET_FS),initramfs-piggyback)
@@ -41,6 +54,6 @@ imageinstall: createinitramfs
 	@echo 'The kernel+initramfs file is: $(FW_DIR)/${TARGET_KERNEL}'
 ifeq ($(ADK_TARGET_SYSTEM_QEMU_SPARC64),y)
 	@echo "Start qemu with following command line:"
-	@echo 'qemu-system-sparc64 -nographic -kernel $(FW_DIR)/$(TARGET_KERNEL)'
+	@echo 'qemu-system-sparc64 $(QEMU_ARGS) -kernel $(FW_DIR)/$(TARGET_KERNEL)'
 endif
 endif
diff --git a/target/sparc64/kernel/qemu-sparc64 b/target/sparc64/kernel/qemu-sparc64
index e78fd6071..a2b048860 100644
--- a/target/sparc64/kernel/qemu-sparc64
+++ b/target/sparc64/kernel/qemu-sparc64
@@ -12,9 +12,6 @@ CONFIG_OF_NET=y
 CONFIG_OF_PCI=y
 CONFIG_IOMMU_SUPPORT=y
 CONFIG_OF_IOMMU=y
-CONFIG_NET_VENDOR_NATSEMI=y
-CONFIG_NET_VENDOR_8390=y
-CONFIG_NE2K_PCI=y
 CONFIG_SERIAL_CONSOLE=y
 CONFIG_SERIAL_SUNCORE=y
 CONFIG_SERIAL_SUNSU=y
diff --git a/target/x86/Makefile b/target/x86/Makefile
index 91c9cef17..489d4dd1d 100644
--- a/target/x86/Makefile
+++ b/target/x86/Makefile
@@ -42,6 +42,12 @@ ifeq ($(ADK_HARDWARE_VBOX),y)
 	@echo "./scripts/create.sh -T vdi vbox-${CPU_ARCH}.img $(FW_DIR)/$(ROOTFSTARBALL)"
 endif
 endif
+ifeq ($(ADK_TARGET_FS),initramfsarchive)
+imageinstall: $(FW_DIR)/$(ROOTFSTARBALL)
+	@cp $(KERNEL) $(FW_DIR)/$(TARGET_KERNEL)
+	@echo 'The kernel file is: $(FW_DIR)/${TARGET_KERNEL}'
+	@echo "The RootFS tarball is: $(FW_DIR)/$(ROOTFSTARBALL)"
+endif
 ifeq ($(ADK_TARGET_FS),usb)
 imageinstall: $(FW_DIR)/$(ROOTFSTARBALL)
 	@echo "The RootFS tarball is: $(FW_DIR)/$(ROOTFSTARBALL)"
diff --git a/target/x86/kernel/qemu-i686 b/target/x86/kernel/qemu-i686
index 275b49592..7eb708745 100644
--- a/target/x86/kernel/qemu-i686
+++ b/target/x86/kernel/qemu-i686
@@ -9,6 +9,3 @@ CONFIG_NET_VENDOR_INTEL=y
 CONFIG_E1000=y
 CONFIG_SERIAL_8250=y
 CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_FIX_EARLYCON_MEM=y
-CONFIG_SERIAL_8250_NR_UARTS=1
-CONFIG_SERIAL_8250_RUNTIME_UARTS=1
diff --git a/target/x86_64/Makefile b/target/x86_64/Makefile
index 596f2923f..7087c9ca1 100644
--- a/target/x86_64/Makefile
+++ b/target/x86_64/Makefile
@@ -20,6 +20,12 @@ ifeq ($(ADK_TARGET_SYSTEM_QEMU_X86_64),y)
 	@echo 'qemu-system-x86_64 ${ADK_QEMU_ARGS} -net user -net nic,model=e1000 -kernel $(FW_DIR)/$(TARGET_KERNEL) qemu-${CPU_ARCH}.img'
 endif
 endif
+ifeq ($(ADK_TARGET_FS),initramfsarchive)
+imageinstall: $(FW_DIR)/$(ROOTFSTARBALL)
+	@cp $(KERNEL) $(FW_DIR)/$(TARGET_KERNEL)
+	@echo 'The kernel file is: $(FW_DIR)/${TARGET_KERNEL}'
+	@echo "The RootFS tarball is: $(FW_DIR)/$(ROOTFSTARBALL)"
+endif
 ifeq ($(ADK_TARGET_FS),usb)
 imageinstall: $(FW_DIR)/$(ROOTFSTARBALL)
 	@echo "The RootFS tarball is: $(FW_DIR)/$(ROOTFSTARBALL)"
diff --git a/target/x86_64/kernel/qemu-x86_64 b/target/x86_64/kernel/qemu-x86_64
index 9c1a14724..e0183cc39 100644
--- a/target/x86_64/kernel/qemu-x86_64
+++ b/target/x86_64/kernel/qemu-x86_64
@@ -24,6 +24,3 @@ CONFIG_E1000=y
 CONFIG_SERIAL_8250=y
 CONFIG_SERIAL_8250_PNP=y
 CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_FIX_EARLYCON_MEM=y
-CONFIG_SERIAL_8250_NR_UARTS=1
-CONFIG_SERIAL_8250_RUNTIME_UARTS=1