diff options
Diffstat (limited to 'target')
| -rw-r--r-- | target/arm/raspberry-pi/patches/3.17.7/raspberry-pi.patch (renamed from target/arm/raspberry-pi/patches/3.17.5/raspberry-pi.patch) | 0 | ||||
| -rw-r--r-- | target/arm/solidrun-imx6/patches/3.17.5/rmk.patch | 7601 | ||||
| -rw-r--r-- | target/config/Config.in.kernelversion.choice | 6 | ||||
| -rw-r--r-- | target/config/Config.in.kernelversion.default | 13 | ||||
| -rw-r--r-- | target/config/Config.in.toolchain | 4 | ||||
| -rw-r--r-- | target/linux/config/Config.in.netfilter | 10 | ||||
| -rw-r--r-- | target/linux/config/Config.in.netfilter.core | 163 | ||||
| -rw-r--r-- | target/linux/config/Config.in.netfilter.ip4 | 84 | ||||
| -rw-r--r-- | target/linux/patches/3.17.7/bsd-compatibility.patch (renamed from target/linux/patches/3.17.5/bsd-compatibility.patch) | 0 | ||||
| -rw-r--r-- | target/linux/patches/3.17.7/cleankernel.patch (renamed from target/linux/patches/3.17.5/cleankernel.patch) | 0 | ||||
| -rw-r--r-- | target/linux/patches/3.17.7/cris-header.patch (renamed from target/linux/patches/3.17.5/cris-header.patch) | 0 | ||||
| -rw-r--r-- | target/linux/patches/3.17.7/defaults.patch (renamed from target/linux/patches/3.17.5/defaults.patch) | 0 | ||||
| -rw-r--r-- | target/linux/patches/3.17.7/export-symbol-for-exmap.patch (renamed from target/linux/patches/3.17.5/export-symbol-for-exmap.patch) | 0 | ||||
| -rw-r--r-- | target/linux/patches/3.17.7/gemalto.patch (renamed from target/linux/patches/3.17.5/gemalto.patch) | 0 | ||||
| -rw-r--r-- | target/linux/patches/3.17.7/initramfs-nosizelimit.patch (renamed from target/linux/patches/3.17.5/initramfs-nosizelimit.patch) | 0 | ||||
| -rw-r--r-- | target/linux/patches/3.17.7/lemote-rfkill.patch (renamed from target/linux/patches/3.17.5/lemote-rfkill.patch) | 0 | ||||
| -rw-r--r-- | target/linux/patches/3.17.7/microblaze-axi.patch (renamed from target/linux/patches/3.17.5/microblaze-axi.patch) | 0 | ||||
| -rw-r--r-- | target/linux/patches/3.17.7/microblaze-ethernet.patch (renamed from target/linux/patches/3.17.5/microblaze-ethernet.patch) | 0 | ||||
| -rw-r--r-- | target/linux/patches/3.17.7/mkpiggy.patch (renamed from target/linux/patches/3.17.5/mkpiggy.patch) | 0 | ||||
| -rw-r--r-- | target/linux/patches/3.17.7/mtd-rootfs.patch (renamed from target/linux/patches/3.17.5/mtd-rootfs.patch) | 0 | ||||
| -rw-r--r-- | target/linux/patches/3.17.7/nfsv3-tcp.patch (renamed from target/linux/patches/3.17.5/nfsv3-tcp.patch) | 0 | ||||
| -rw-r--r-- | target/linux/patches/3.17.7/non-static.patch (renamed from target/linux/patches/3.17.5/non-static.patch) | 0 | ||||
| -rw-r--r-- | target/linux/patches/3.17.7/patch-fblogo (renamed from target/linux/patches/3.17.5/patch-fblogo) | 0 | ||||
| -rw-r--r-- | target/linux/patches/3.17.7/patch-yaffs2 (renamed from target/linux/patches/3.17.5/patch-yaffs2) | 0 | ||||
| -rw-r--r-- | target/linux/patches/3.17.7/ppc64-missing-zlib.patch (renamed from target/linux/patches/3.17.5/ppc64-missing-zlib.patch) | 0 | ||||
| -rw-r--r-- | target/linux/patches/3.17.7/regmap-boolean.patch (renamed from target/linux/patches/3.17.5/regmap-boolean.patch) | 0 | ||||
| -rw-r--r-- | target/linux/patches/3.17.7/relocs.patch (renamed from target/linux/patches/3.17.5/relocs.patch) | 0 | ||||
| -rw-r--r-- | target/linux/patches/3.17.7/sgidefs.patch (renamed from target/linux/patches/3.17.5/sgidefs.patch) | 0 | ||||
| -rw-r--r-- | target/linux/patches/3.17.7/sortext.patch (renamed from target/linux/patches/3.17.5/sortext.patch) | 0 | ||||
| -rw-r--r-- | target/linux/patches/3.17.7/startup.patch (renamed from target/linux/patches/3.17.5/startup.patch) | 0 | ||||
| -rw-r--r-- | target/linux/patches/3.17.7/wlan-cf.patch (renamed from target/linux/patches/3.17.5/wlan-cf.patch) | 0 | ||||
| -rw-r--r-- | target/linux/patches/3.17.7/xargs.patch (renamed from target/linux/patches/3.17.5/xargs.patch) | 0 | ||||
| -rw-r--r-- | target/m68k/qemu-m68k/patches/3.17.7/qemu-coldfire.patch (renamed from target/m68k/qemu-m68k/patches/3.17.5/qemu-coldfire.patch) | 0 | ||||
| -rw-r--r-- | target/mips64/lemote-yeelong/patches/3.17.7/sm7xx-fb.patch (renamed from target/mips64/lemote-yeelong/patches/3.17.5/sm7xx-fb.patch) | 0 |
34 files changed, 138 insertions, 7743 deletions
diff --git a/target/arm/raspberry-pi/patches/3.17.5/raspberry-pi.patch b/target/arm/raspberry-pi/patches/3.17.7/raspberry-pi.patch index 9e8b16382..9e8b16382 100644 --- a/target/arm/raspberry-pi/patches/3.17.5/raspberry-pi.patch +++ b/target/arm/raspberry-pi/patches/3.17.7/raspberry-pi.patch diff --git a/target/arm/solidrun-imx6/patches/3.17.5/rmk.patch b/target/arm/solidrun-imx6/patches/3.17.5/rmk.patch deleted file mode 100644 index a0e0e7495..000000000 --- a/target/arm/solidrun-imx6/patches/3.17.5/rmk.patch +++ /dev/null @@ -1,7601 +0,0 @@ -diff -Nur linux-3.16.6.orig/arch/arm/boot/dts/imx6dl-hummingboard.dts linux-3.16.6/arch/arm/boot/dts/imx6dl-hummingboard.dts ---- linux-3.16.6.orig/arch/arm/boot/dts/imx6dl-hummingboard.dts 2014-10-15 05:05:43.000000000 -0500 -+++ linux-3.16.6/arch/arm/boot/dts/imx6dl-hummingboard.dts 2014-10-23 12:37:45.114220003 -0500 -@@ -56,15 +56,32 @@ - }; - }; - -+ sound-sgtl5000 { -+ audio-codec = <&sgtl5000>; -+ audio-routing = -+ "MIC_IN", "Mic Jack", -+ "Mic Jack", "Mic Bias", -+ "Headphone Jack", "HP_OUT"; -+ compatible = "fsl,imx-audio-sgtl5000"; -+ model = "On-board Codec"; -+ mux-ext-port = <5>; -+ mux-int-port = <1>; -+ ssi-controller = <&ssi1>; -+ }; -+ - sound-spdif { - compatible = "fsl,imx-audio-spdif"; -- model = "imx-spdif"; -+ model = "On-board SPDIF"; - /* IMX6 doesn't implement this yet */ - spdif-controller = <&spdif>; - spdif-out; - }; - }; - -+&audmux { -+ status = "okay"; -+}; -+ - &can1 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_hummingboard_flexcan1>; -@@ -81,16 +98,24 @@ - &i2c1 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_hummingboard_i2c1>; -- -- /* -- * Not fitted on Carrier-1 board... yet - status = "okay"; - -+ /* Pro model */ - rtc: pcf8523@68 { - compatible = "nxp,pcf8523"; - reg = <0x68>; - }; -- */ -+ -+ /* Pro model */ -+ sgtl5000: sgtl5000@0a { -+ clocks = <&clks 201>; -+ compatible = "fsl,sgtl5000"; -+ pinctrl-names = "default"; -+ pinctrl-0 = <&pinctrl_hummingboard_sgtl5000>; -+ reg = <0x0a>; -+ VDDA-supply = <®_3p3v>; -+ VDDIO-supply = <®_3p3v>; -+ }; - }; - - &i2c2 { -@@ -135,6 +160,16 @@ - >; - }; - -+ pinctrl_hummingboard_sgtl5000: hummingboard-sgtl5000 { -+ fsl,pins = < -+ MX6QDL_PAD_DISP0_DAT19__AUD5_RXD 0x130b0 /*brk*/ -+ MX6QDL_PAD_KEY_COL0__AUD5_TXC 0x130b0 /*ok*/ -+ MX6QDL_PAD_KEY_ROW0__AUD5_TXD 0x110b0 /*brk*/ -+ MX6QDL_PAD_KEY_COL1__AUD5_TXFS 0x130b0 /*ok*/ -+ MX6QDL_PAD_GPIO_5__CCM_CLKO1 0x130b0 -+ >; -+ }; -+ - pinctrl_hummingboard_spdif: hummingboard-spdif { - fsl,pins = <MX6QDL_PAD_GPIO_17__SPDIF_OUT 0x13091>; - }; -@@ -180,12 +215,19 @@ - status = "okay"; - }; - -+&ssi1 { -+ fsl,mode = "i2s-slave"; -+ status = "okay"; -+}; -+ - &usbh1 { -+ disable-over-current; - vbus-supply = <®_usbh1_vbus>; - status = "okay"; - }; - - &usbotg { -+ disable-over-current; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_hummingboard_usbotg_id>; - vbus-supply = <®_usbotg_vbus>; -diff -Nur linux-3.16.6.orig/arch/arm/boot/dts/imx6q-cubox-i.dts linux-3.16.6/arch/arm/boot/dts/imx6q-cubox-i.dts ---- linux-3.16.6.orig/arch/arm/boot/dts/imx6q-cubox-i.dts 2014-10-15 05:05:43.000000000 -0500 -+++ linux-3.16.6/arch/arm/boot/dts/imx6q-cubox-i.dts 2014-10-23 12:26:42.106220014 -0500 -@@ -13,4 +13,8 @@ - - &sata { - status = "okay"; -+ fsl,transmit-level-mV = <1104>; -+ fsl,transmit-boost-mdB = <0>; -+ fsl,transmit-atten-16ths = <9>; -+ fsl,no-spread-spectrum; - }; -diff -Nur linux-3.16.6.orig/arch/arm/boot/dts/imx6qdl-cubox-i.dtsi linux-3.16.6/arch/arm/boot/dts/imx6qdl-cubox-i.dtsi ---- linux-3.16.6.orig/arch/arm/boot/dts/imx6qdl-cubox-i.dtsi 2014-10-15 05:05:43.000000000 -0500 -+++ linux-3.16.6/arch/arm/boot/dts/imx6qdl-cubox-i.dtsi 2014-10-23 12:34:41.266219992 -0500 -@@ -61,7 +61,7 @@ - - sound-spdif { - compatible = "fsl,imx-audio-spdif"; -- model = "imx-spdif"; -+ model = "Integrated SPDIF"; - /* IMX6 doesn't implement this yet */ - spdif-controller = <&spdif>; - spdif-out; -@@ -130,16 +130,23 @@ - fsl,pins = <MX6QDL_PAD_GPIO_17__SPDIF_OUT 0x13091>; - }; - -+ pinctrl_cubox_i_usbh1: cubox-i-usbh1 { -+ fsl,pins = <MX6QDL_PAD_GPIO_3__USB_H1_OC 0x1b0b0>; -+ }; -+ - pinctrl_cubox_i_usbh1_vbus: cubox-i-usbh1-vbus { - fsl,pins = <MX6QDL_PAD_GPIO_0__GPIO1_IO00 0x4001b0b0>; - }; - -- pinctrl_cubox_i_usbotg_id: cubox-i-usbotg-id { -+ pinctrl_cubox_i_usbotg: cubox-i-usbotg { - /* -- * The Cubox-i pulls this low, but as it's pointless -+ * The Cubox-i pulls ID low, but as it's pointless - * leaving it as a pull-up, even if it is just 10uA. - */ -- fsl,pins = <MX6QDL_PAD_GPIO_1__USB_OTG_ID 0x13059>; -+ fsl,pins = < -+ MX6QDL_PAD_GPIO_1__USB_OTG_ID 0x13059 -+ MX6QDL_PAD_KEY_COL4__USB_OTG_OC 0x1b0b0 -+ >; - }; - - pinctrl_cubox_i_usbotg_vbus: cubox-i-usbotg-vbus { -@@ -163,6 +170,28 @@ - MX6QDL_PAD_SD2_DAT3__SD2_DATA3 0x13059 - >; - }; -+ -+ pinctrl_cubox_i_usdhc2_100mhz: cubox-i-usdhc2-100mhz { -+ fsl,pins = < -+ MX6QDL_PAD_SD2_CMD__SD2_CMD 0x170b9 -+ MX6QDL_PAD_SD2_CLK__SD2_CLK 0x100b9 -+ MX6QDL_PAD_SD2_DAT0__SD2_DATA0 0x170b9 -+ MX6QDL_PAD_SD2_DAT1__SD2_DATA1 0x170b9 -+ MX6QDL_PAD_SD2_DAT2__SD2_DATA2 0x170b9 -+ MX6QDL_PAD_SD2_DAT3__SD2_DATA3 0x130b9 -+ >; -+ }; -+ -+ pinctrl_cubox_i_usdhc2_200mhz: cubox-i-usdhc2-200mhz { -+ fsl,pins = < -+ MX6QDL_PAD_SD2_CMD__SD2_CMD 0x170f9 -+ MX6QDL_PAD_SD2_CLK__SD2_CLK 0x100f9 -+ MX6QDL_PAD_SD2_DAT0__SD2_DATA0 0x170f9 -+ MX6QDL_PAD_SD2_DAT1__SD2_DATA1 0x170f9 -+ MX6QDL_PAD_SD2_DAT2__SD2_DATA2 0x170f9 -+ MX6QDL_PAD_SD2_DAT3__SD2_DATA3 0x130f9 -+ >; -+ }; - }; - }; - -@@ -173,20 +202,24 @@ - }; - - &usbh1 { -+ pinctrl-names = "default"; -+ pinctrl-0 = <&pinctrl_cubox_i_usbh1>; - vbus-supply = <®_usbh1_vbus>; - status = "okay"; - }; - - &usbotg { - pinctrl-names = "default"; -- pinctrl-0 = <&pinctrl_cubox_i_usbotg_id>; -+ pinctrl-0 = <&pinctrl_cubox_i_usbotg>; - vbus-supply = <®_usbotg_vbus>; - status = "okay"; - }; - - &usdhc2 { -- pinctrl-names = "default"; -+ pinctrl-names = "default", "state_100mhz", "state_200mhz"; - pinctrl-0 = <&pinctrl_cubox_i_usdhc2_aux &pinctrl_cubox_i_usdhc2>; -+ pinctrl-1 = <&pinctrl_cubox_i_usdhc2_aux &pinctrl_cubox_i_usdhc2_100mhz>; -+ pinctrl-2 = <&pinctrl_cubox_i_usdhc2_aux &pinctrl_cubox_i_usdhc2_200mhz>; - vmmc-supply = <®_3p3v>; - cd-gpios = <&gpio1 4 0>; - status = "okay"; -diff -Nur linux-3.16.6.orig/arch/arm/boot/dts/imx6qdl-cubox-i.dtsi.orig linux-3.16.6/arch/arm/boot/dts/imx6qdl-cubox-i.dtsi.orig ---- linux-3.16.6.orig/arch/arm/boot/dts/imx6qdl-cubox-i.dtsi.orig 1969-12-31 18:00:00.000000000 -0600 -+++ linux-3.16.6/arch/arm/boot/dts/imx6qdl-cubox-i.dtsi.orig 2014-10-23 12:27:10.986220036 -0500 -@@ -0,0 +1,202 @@ -+/* -+ * Copyright (C) 2014 Russell King -+ */ -+#include "imx6qdl-microsom.dtsi" -+#include "imx6qdl-microsom-ar8035.dtsi" -+ -+/ { -+ ir_recv: ir-receiver { -+ compatible = "gpio-ir-receiver"; -+ gpios = <&gpio3 9 1>; -+ pinctrl-names = "default"; -+ pinctrl-0 = <&pinctrl_cubox_i_ir>; -+ }; -+ -+ pwmleds { -+ compatible = "pwm-leds"; -+ pinctrl-names = "default"; -+ pinctrl-0 = <&pinctrl_cubox_i_pwm1>; -+ -+ front { -+ active-low; -+ label = "imx6:red:front"; -+ max-brightness = <248>; -+ pwms = <&pwm1 0 50000>; -+ }; -+ }; -+ -+ regulators { -+ compatible = "simple-bus"; -+ -+ reg_3p3v: 3p3v { -+ compatible = "regulator-fixed"; -+ regulator-name = "3P3V"; -+ regulator-min-microvolt = <3300000>; -+ regulator-max-microvolt = <3300000>; -+ regulator-always-on; -+ }; -+ -+ reg_usbh1_vbus: usb-h1-vbus { -+ compatible = "regulator-fixed"; -+ enable-active-high; -+ gpio = <&gpio1 0 0>; -+ pinctrl-names = "default"; -+ pinctrl-0 = <&pinctrl_cubox_i_usbh1_vbus>; -+ regulator-name = "usb_h1_vbus"; -+ regulator-min-microvolt = <5000000>; -+ regulator-max-microvolt = <5000000>; -+ }; -+ -+ reg_usbotg_vbus: usb-otg-vbus { -+ compatible = "regulator-fixed"; -+ enable-active-high; -+ gpio = <&gpio3 22 0>; -+ pinctrl-names = "default"; -+ pinctrl-0 = <&pinctrl_cubox_i_usbotg_vbus>; -+ regulator-name = "usb_otg_vbus"; -+ regulator-min-microvolt = <5000000>; -+ regulator-max-microvolt = <5000000>; -+ }; -+ }; -+ -+ sound-spdif { -+ compatible = "fsl,imx-audio-spdif"; -+ model = "Integrated SPDIF"; -+ /* IMX6 doesn't implement this yet */ -+ spdif-controller = <&spdif>; -+ spdif-out; -+ }; -+}; -+ -+&hdmi { -+ pinctrl-names = "default"; -+ pinctrl-0 = <&pinctrl_cubox_i_hdmi>; -+ ddc-i2c-bus = <&i2c2>; -+ status = "okay"; -+}; -+ -+&i2c2 { -+ clock-frequency = <100000>; -+ pinctrl-names = "default"; -+ pinctrl-0 = <&pinctrl_cubox_i_i2c2>; -+ status = "okay"; -+}; -+ -+&i2c3 { -+ pinctrl-names = "default"; -+ pinctrl-0 = <&pinctrl_cubox_i_i2c3>; -+ -+ status = "okay"; -+ -+ rtc: pcf8523@68 { -+ compatible = "nxp,pcf8523"; -+ reg = <0x68>; -+ }; -+}; -+ -+&iomuxc { -+ cubox_i { -+ pinctrl_cubox_i_hdmi: cubox-i-hdmi { -+ fsl,pins = < -+ MX6QDL_PAD_KEY_ROW2__HDMI_TX_CEC_LINE 0x1f8b0 -+ >; -+ }; -+ -+ pinctrl_cubox_i_i2c2: cubox-i-i2c2 { -+ fsl,pins = < -+ MX6QDL_PAD_KEY_COL3__I2C2_SCL 0x4001b8b1 -+ MX6QDL_PAD_KEY_ROW3__I2C2_SDA 0x4001b8b1 -+ >; -+ }; -+ -+ pinctrl_cubox_i_i2c3: cubox-i-i2c3 { -+ fsl,pins = < -+ MX6QDL_PAD_EIM_D17__I2C3_SCL 0x4001b8b1 -+ MX6QDL_PAD_EIM_D18__I2C3_SDA 0x4001b8b1 -+ >; -+ }; -+ -+ pinctrl_cubox_i_ir: cubox-i-ir { -+ fsl,pins = < -+ MX6QDL_PAD_EIM_DA9__GPIO3_IO09 0x80000000 -+ >; -+ }; -+ -+ pinctrl_cubox_i_pwm1: cubox-i-pwm1-front-led { -+ fsl,pins = <MX6QDL_PAD_DISP0_DAT8__PWM1_OUT 0x1b0b0>; -+ }; -+ -+ pinctrl_cubox_i_spdif: cubox-i-spdif { -+ fsl,pins = <MX6QDL_PAD_GPIO_17__SPDIF_OUT 0x13091>; -+ }; -+ -+ pinctrl_cubox_i_usbh1: cubox-i-usbh1 { -+ fsl,pins = <MX6QDL_PAD_GPIO_3__USB_H1_OC 0x1b0b0>; -+ }; -+ -+ pinctrl_cubox_i_usbh1_vbus: cubox-i-usbh1-vbus { -+ fsl,pins = <MX6QDL_PAD_GPIO_0__GPIO1_IO00 0x4001b0b0>; -+ }; -+ -+ pinctrl_cubox_i_usbotg: cubox-i-usbotg { -+ /* -+ * The Cubox-i pulls ID low, but as it's pointless -+ * leaving it as a pull-up, even if it is just 10uA. -+ */ -+ fsl,pins = < -+ MX6QDL_PAD_GPIO_1__USB_OTG_ID 0x13059 -+ MX6QDL_PAD_KEY_COL4__USB_OTG_OC 0x1b0b0 -+ >; -+ }; -+ -+ pinctrl_cubox_i_usbotg_vbus: cubox-i-usbotg-vbus { -+ fsl,pins = <MX6QDL_PAD_EIM_D22__GPIO3_IO22 0x4001b0b0>; -+ }; -+ -+ pinctrl_cubox_i_usdhc2_aux: cubox-i-usdhc2-aux { -+ fsl,pins = < -+ MX6QDL_PAD_GPIO_4__GPIO1_IO04 0x1f071 -+ MX6QDL_PAD_KEY_ROW1__SD2_VSELECT 0x1b071 -+ >; -+ }; -+ -+ pinctrl_cubox_i_usdhc2: cubox-i-usdhc2 { -+ fsl,pins = < -+ MX6QDL_PAD_SD2_CMD__SD2_CMD 0x17059 -+ MX6QDL_PAD_SD2_CLK__SD2_CLK 0x10059 -+ MX6QDL_PAD_SD2_DAT0__SD2_DATA0 0x17059 -+ MX6QDL_PAD_SD2_DAT1__SD2_DATA1 0x17059 -+ MX6QDL_PAD_SD2_DAT2__SD2_DATA2 0x17059 -+ MX6QDL_PAD_SD2_DAT3__SD2_DATA3 0x13059 -+ >; -+ }; -+ }; -+}; -+ -+&spdif { -+ pinctrl-names = "default"; -+ pinctrl-0 = <&pinctrl_cubox_i_spdif>; -+ status = "okay"; -+}; -+ -+&usbh1 { -+ pinctrl-names = "default"; -+ pinctrl-0 = <&pinctrl_cubox_i_usbh1>; -+ vbus-supply = <®_usbh1_vbus>; -+ status = "okay"; -+}; -+ -+&usbotg { -+ pinctrl-names = "default"; -+ pinctrl-0 = <&pinctrl_cubox_i_usbotg>; -+ vbus-supply = <®_usbotg_vbus>; -+ status = "okay"; -+}; -+ -+&usdhc2 { -+ pinctrl-names = "default"; -+ pinctrl-0 = <&pinctrl_cubox_i_usdhc2_aux &pinctrl_cubox_i_usdhc2>; -+ vmmc-supply = <®_3p3v>; -+ cd-gpios = <&gpio1 4 0>; -+ status = "okay"; -+}; -diff -Nur linux-3.16.6.orig/arch/arm/boot/dts/imx6qdl-microsom.dtsi linux-3.16.6/arch/arm/boot/dts/imx6qdl-microsom.dtsi ---- linux-3.16.6.orig/arch/arm/boot/dts/imx6qdl-microsom.dtsi 2014-10-15 05:05:43.000000000 -0500 -+++ linux-3.16.6/arch/arm/boot/dts/imx6qdl-microsom.dtsi 2014-10-23 12:34:48.394220240 -0500 -@@ -1,15 +1,95 @@ - /* - * Copyright (C) 2013,2014 Russell King - */ -+#include <dt-bindings/gpio/gpio.h> -+/ { -+ regulators { -+ compatible = "simple-bus"; -+ -+ reg_brcm_osc: brcm-osc-reg { -+ compatible = "regulator-fixed"; -+ enable-active-high; -+ gpio = <&gpio5 5 0>; -+ pinctrl-names = "default"; -+ pinctrl-0 = <&pinctrl_microsom_brcm_osc_reg>; -+ regulator-name = "brcm_osc_reg"; -+ regulator-min-microvolt = <3300000>; -+ regulator-max-microvolt = <3300000>; -+ regulator-always-on; -+ regulator-boot-on; -+ }; -+ -+ reg_brcm: brcm-reg { -+ compatible = "regulator-fixed"; -+ enable-active-high; -+ gpio = <&gpio3 19 0>; -+ pinctrl-names = "default"; -+ pinctrl-0 = <&pinctrl_microsom_brcm_reg>; -+ regulator-name = "brcm_reg"; -+ regulator-min-microvolt = <3300000>; -+ regulator-max-microvolt = <3300000>; -+ startup-delay-us = <200000>; -+ }; -+ }; -+}; - - &iomuxc { - microsom { -+ pinctrl_microsom_brcm_bt: microsom-brcm-bt { -+ fsl,pins = < -+ MX6QDL_PAD_CSI0_DAT14__GPIO6_IO00 0x40013070 -+ MX6QDL_PAD_CSI0_DAT15__GPIO6_IO01 0x40013070 -+ MX6QDL_PAD_CSI0_DAT18__GPIO6_IO04 0x40013070 -+ >; -+ }; -+ -+ pinctrl_microsom_brcm_osc_reg: microsom-brcm-osc-reg { -+ fsl,pins = < -+ MX6QDL_PAD_DISP0_DAT11__GPIO5_IO05 0x40013070 -+ >; -+ }; -+ -+ pinctrl_microsom_brcm_reg: microsom-brcm-reg { -+ fsl,pins = < -+ MX6QDL_PAD_EIM_D19__GPIO3_IO19 0x40013070 -+ >; -+ }; -+ -+ pinctrl_microsom_brcm_wifi: microsom-brcm-wifi { -+ fsl,pins = < -+ MX6QDL_PAD_GPIO_8__XTALOSC_REF_CLK_32K 0x1b0b0 -+ MX6QDL_PAD_CSI0_DATA_EN__GPIO5_IO20 0x40013070 -+ MX6QDL_PAD_CSI0_DAT8__GPIO5_IO26 0x40013070 -+ MX6QDL_PAD_CSI0_DAT9__GPIO5_IO27 0x40013070 -+ >; -+ }; -+ - pinctrl_microsom_uart1: microsom-uart1 { - fsl,pins = < - MX6QDL_PAD_CSI0_DAT10__UART1_TX_DATA 0x1b0b1 - MX6QDL_PAD_CSI0_DAT11__UART1_RX_DATA 0x1b0b1 - >; - }; -+ -+ pinctrl_microsom_uart4_1: microsom-uart4 { -+ fsl,pins = < -+ MX6QDL_PAD_CSI0_DAT12__UART4_TX_DATA 0x1b0b1 -+ MX6QDL_PAD_CSI0_DAT13__UART4_RX_DATA 0x1b0b1 -+ MX6QDL_PAD_CSI0_DAT16__UART4_RTS_B 0x1b0b1 -+ MX6QDL_PAD_CSI0_DAT17__UART4_CTS_B 0x1b0b1 -+ >; -+ }; -+ -+ pinctrl_microsom_usdhc1: microsom-usdhc1 { -+ fsl,pins = < -+ MX6QDL_PAD_SD1_CMD__SD1_CMD 0x17059 -+ MX6QDL_PAD_SD1_CLK__SD1_CLK 0x10059 -+ MX6QDL_PAD_SD1_DAT0__SD1_DATA0 0x17059 -+ MX6QDL_PAD_SD1_DAT1__SD1_DATA1 0x17059 -+ MX6QDL_PAD_SD1_DAT2__SD1_DATA2 0x17059 -+ MX6QDL_PAD_SD1_DAT3__SD1_DATA3 0x17059 -+ >; -+ }; - }; - }; - -@@ -18,3 +98,23 @@ - pinctrl-0 = <&pinctrl_microsom_uart1>; - status = "okay"; - }; -+ -+/* UART4 - Connected to optional BRCM Wifi/BT/FM */ -+&uart4 { -+ pinctrl-names = "default"; -+ pinctrl-0 = <&pinctrl_microsom_brcm_bt &pinctrl_microsom_uart4_1>; -+ fsl,uart-has-rtscts; -+ status = "okay"; -+}; -+ -+/* USDHC1 - Connected to optional BRCM Wifi/BT/FM */ -+&usdhc1 { -+ card-external-vcc-supply = <®_brcm>; -+ card-reset-gpios = <&gpio5 26 GPIO_ACTIVE_LOW>, <&gpio6 0 GPIO_ACTIVE_LOW>; -+ keep-power-in-suspend; -+ non-removable; -+ pinctrl-names = "default"; -+ pinctrl-0 = <&pinctrl_microsom_brcm_wifi &pinctrl_microsom_usdhc1>; -+ vmmc-supply = <®_brcm>; -+ status = "okay"; -+}; -diff -Nur linux-3.16.6.orig/arch/arm/mach-imx/clk-imx6q.c linux-3.16.6/arch/arm/mach-imx/clk-imx6q.c ---- linux-3.16.6.orig/arch/arm/mach-imx/clk-imx6q.c 2014-10-15 05:05:43.000000000 -0500 -+++ linux-3.16.6/arch/arm/mach-imx/clk-imx6q.c 2014-10-23 12:36:09.214219998 -0500 -@@ -461,6 +461,9 @@ - clk_set_parent(clk[ipu2_di0_sel], clk[ipu2_di0_pre]); - clk_set_parent(clk[ipu2_di1_sel], clk[ipu2_di1_pre]); - -+ if (cpu_is_imx6dl()) -+ clk_set_parent(clk[ipu1_sel], clk[pll3_pfd1_540m]); -+ - /* - * The gpmi needs 100MHz frequency in the EDO/Sync mode, - * We can not get the 100MHz from the pll2_pfd0_352m. -diff -Nur linux-3.16.6.orig/arch/arm/mach-imx/clk-pllv3.c linux-3.16.6/arch/arm/mach-imx/clk-pllv3.c ---- linux-3.16.6.orig/arch/arm/mach-imx/clk-pllv3.c 2014-10-15 05:05:43.000000000 -0500 -+++ linux-3.16.6/arch/arm/mach-imx/clk-pllv3.c 2014-10-23 12:36:01.390219997 -0500 -@@ -273,9 +273,10 @@ - struct clk_pllv3 *pll = to_clk_pllv3(hw); - unsigned long min_rate = parent_rate * 27; - unsigned long max_rate = parent_rate * 54; -- u32 val, div; -+ u32 val, newval, div; - u32 mfn, mfd = 1000000; - s64 temp64; -+ int ret; - - if (rate < min_rate || rate > max_rate) - return -EINVAL; -@@ -287,13 +288,27 @@ - mfn = temp64; - - val = readl_relaxed(pll->base); -- val &= ~pll->div_mask; -- val |= div; -- writel_relaxed(val, pll->base); -+ -+ /* set the PLL into bypass mode */ -+ newval = val | BM_PLL_BYPASS; -+ writel_relaxed(newval, pll->base); -+ -+ /* configure the new frequency */ -+ newval &= ~pll->div_mask; -+ newval |= div; -+ writel_relaxed(newval, pll->base); - writel_relaxed(mfn, pll->base + PLL_NUM_OFFSET); -- writel_relaxed(mfd, pll->base + PLL_DENOM_OFFSET); -+ writel(mfd, pll->base + PLL_DENOM_OFFSET); -+ -+ ret = clk_pllv3_wait_lock(pll); -+ if (ret == 0 && val & BM_PLL_POWER) { -+ /* only if it locked can we switch back to the PLL */ -+ newval &= ~BM_PLL_BYPASS; -+ newval |= val & BM_PLL_BYPASS; -+ writel(newval, pll->base); -+ } - -- return clk_pllv3_wait_lock(pll); -+ return ret; - } - - static const struct clk_ops clk_pllv3_av_ops = { -diff -Nur linux-3.16.6.orig/Documentation/devicetree/bindings/ata/ahci-platform.txt linux-3.16.6/Documentation/devicetree/bindings/ata/ahci-platform.txt ---- linux-3.16.6.orig/Documentation/devicetree/bindings/ata/ahci-platform.txt 2014-10-15 05:05:43.000000000 -0500 -+++ linux-3.16.6/Documentation/devicetree/bindings/ata/ahci-platform.txt 2014-10-23 12:15:35.154220017 -0500 -@@ -6,8 +6,6 @@ - Required properties: - - compatible : compatible string, one of: - - "allwinner,sun4i-a10-ahci" -- - "fsl,imx53-ahci" -- - "fsl,imx6q-ahci" - - "hisilicon,hisi-ahci" - - "ibm,476gtr-ahci" - - "marvell,armada-380-ahci" -@@ -22,10 +20,6 @@ - - clocks : a list of phandle + clock specifier pairs - - target-supply : regulator for SATA target power - --"fsl,imx53-ahci", "fsl,imx6q-ahci" required properties: --- clocks : must contain the sata, sata_ref and ahb clocks --- clock-names : must contain "ahb" for the ahb clock -- - Examples: - sata@ffe08000 { - compatible = "snps,spear-ahci"; -diff -Nur linux-3.16.6.orig/Documentation/devicetree/bindings/ata/imx-sata.txt linux-3.16.6/Documentation/devicetree/bindings/ata/imx-sata.txt ---- linux-3.16.6.orig/Documentation/devicetree/bindings/ata/imx-sata.txt 1969-12-31 18:00:00.000000000 -0600 -+++ linux-3.16.6/Documentation/devicetree/bindings/ata/imx-sata.txt 2014-10-23 12:26:27.434219953 -0500 -@@ -0,0 +1,36 @@ -+* Freescale i.MX AHCI SATA Controller -+ -+The Freescale i.MX SATA controller mostly conforms to the AHCI interface -+with some special extensions at integration level. -+ -+Required properties: -+- compatible : should be one of the following: -+ - "fsl,imx53-ahci" for i.MX53 SATA controller -+ - "fsl,imx6q-ahci" for i.MX6Q SATA controller -+- interrupts : interrupt mapping for SATA IRQ -+- reg : registers mapping -+- clocks : list of clock specifiers, must contain an entry for each -+ required entry in clock-names -+- clock-names : should include "sata", "sata_ref" and "ahb" entries -+ -+Optional properties: -+- fsl,transmit-level-mV : transmit voltage level, in millivolts. -+- fsl,transmit-boost-mdB : transmit boost level, in milli-decibels -+- fsl,transmit-atten-16ths : transmit attenuation, in 16ths -+- fsl,receive-eq-mdB : receive equalisation, in milli-decibels -+ Please refer to the technical documentation or the driver source code -+ for the list of legal values for these options. -+- fsl,no-spread-spectrum : disable spread-spectrum clocking on the SATA -+ link. -+ -+Examples: -+ -+sata@02200000 { -+ compatible = "fsl,imx6q-ahci"; -+ reg = <0x02200000 0x4000>; -+ interrupts = <0 39 IRQ_TYPE_LEVEL_HIGH>; -+ clocks = <&clks IMX6QDL_CLK_SATA>, -+ <&clks IMX6QDL_CLK_SATA_REF_100M>, -+ <&clks IMX6QDL_CLK_AHB>; -+ clock-names = "sata", "sata_ref", "ahb"; -+}; -diff -Nur linux-3.16.6.orig/Documentation/devicetree/bindings/mmc/mmc.txt linux-3.16.6/Documentation/devicetree/bindings/mmc/mmc.txt ---- linux-3.16.6.orig/Documentation/devicetree/bindings/mmc/mmc.txt 2014-10-15 05:05:43.000000000 -0500 -+++ linux-3.16.6/Documentation/devicetree/bindings/mmc/mmc.txt 2014-10-23 12:34:18.694220003 -0500 -@@ -5,6 +5,8 @@ - Interpreted by the OF core: - - reg: Registers location and length. - - interrupts: Interrupts used by the MMC controller. -+- clocks: Clocks needed for the host controller, if any. -+- clock-names: Goes with clocks above. - - Card detection: - If no property below is supplied, host native card detect is used. -@@ -41,6 +43,15 @@ - - mmc-hs400-1_8v: eMMC HS400 mode(1.8V I/O) is supported - - mmc-hs400-1_2v: eMMC HS400 mode(1.2V I/O) is supported - -+Card power and reset control: -+The following properties can be specified for cases where the MMC -+peripheral needs additional reset, regulator and clock lines. It is for -+example common for WiFi/BT adapters to have these separate from the main -+MMC bus: -+ - card-reset-gpios: Specify GPIOs for card reset (reset active low) -+ - card-external-vcc-supply: Regulator to drive (independent) card VCC -+ - clock with name "card_ext_clock": External clock provided to the card -+ - *NOTE* on CD and WP polarity. To use common for all SD/MMC host controllers line - polarity properties, we have to fix the meaning of the "normal" and "inverted" - line levels. We choose to follow the SDHCI standard, which specifies both those -diff -Nur linux-3.16.6.orig/Documentation/devicetree/bindings/staging/imx-drm/fsl-imx-drm.txt linux-3.16.6/Documentation/devicetree/bindings/staging/imx-drm/fsl-imx-drm.txt ---- linux-3.16.6.orig/Documentation/devicetree/bindings/staging/imx-drm/fsl-imx-drm.txt 2014-10-15 05:05:43.000000000 -0500 -+++ linux-3.16.6/Documentation/devicetree/bindings/staging/imx-drm/fsl-imx-drm.txt 2014-10-23 12:35:30.946219998 -0500 -@@ -60,8 +60,8 @@ - - compatible: Should be "fsl,imx-parallel-display" - Optional properties: - - interface_pix_fmt: How this display is connected to the -- display interface. Currently supported types: "rgb24", "rgb565", "bgr666" -- and "lvds666". -+ display interface. Currently supported types: "rgb24", "rgb565", "bgr666", -+ "rgb666" and "lvds666". - - edid: verbatim EDID data block describing attached display. - - ddc: phandle describing the i2c bus handling the display data - channel -diff -Nur linux-3.16.6.orig/Documentation/DocBook/media/v4l/pixfmt-packed-rgb.xml linux-3.16.6/Documentation/DocBook/media/v4l/pixfmt-packed-rgb.xml ---- linux-3.16.6.orig/Documentation/DocBook/media/v4l/pixfmt-packed-rgb.xml 2014-10-15 05:05:43.000000000 -0500 -+++ linux-3.16.6/Documentation/DocBook/media/v4l/pixfmt-packed-rgb.xml 2014-10-23 12:35:23.678220004 -0500 -@@ -279,6 +279,45 @@ - <entry></entry> - <entry></entry> - </row> -+ <row id="V4L2-PIX-FMT-RGB666"> -+ <entry><constant>V4L2_PIX_FMT_RGB666</constant></entry> -+ <entry>'RGBH'</entry> -+ <entry></entry> -+ <entry>r<subscript>5</subscript></entry> -+ <entry>r<subscript>4</subscript></entry> -+ <entry>r<subscript>3</subscript></entry> -+ <entry>r<subscript>2</subscript></entry> -+ <entry>r<subscript>1</subscript></entry> -+ <entry>r<subscript>0</subscript></entry> -+ <entry>g<subscript>5</subscript></entry> -+ <entry>g<subscript>4</subscript></entry> -+ <entry></entry> -+ <entry>g<subscript>3</subscript></entry> -+ <entry>g<subscript>2</subscript></entry> -+ <entry>g<subscript>1</subscript></entry> -+ <entry>g<subscript>0</subscript></entry> -+ <entry>b<subscript>5</subscript></entry> -+ <entry>b<subscript>4</subscript></entry> -+ <entry>b<subscript>3</subscript></entry> -+ <entry>b<subscript>2</subscript></entry> -+ <entry></entry> -+ <entry>b<subscript>1</subscript></entry> -+ <entry>b<subscript>0</subscript></entry> -+ <entry></entry> -+ <entry></entry> -+ <entry></entry> -+ <entry></entry> -+ <entry></entry> -+ <entry></entry> -+ <entry></entry> -+ <entry></entry> -+ <entry></entry> -+ <entry></entry> -+ <entry></entry> -+ <entry></entry> -+ <entry></entry> -+ <entry></entry> -+ </row> - <row id="V4L2-PIX-FMT-BGR24"> - <entry><constant>V4L2_PIX_FMT_BGR24</constant></entry> - <entry>'BGR3'</entry> -diff -Nur linux-3.16.6.orig/drivers/ata/ahci_imx.c linux-3.16.6/drivers/ata/ahci_imx.c ---- linux-3.16.6.orig/drivers/ata/ahci_imx.c 2014-10- |