diff options
Diffstat (limited to 'target/waldux/config/Config.in.network')
| -rw-r--r-- | target/waldux/config/Config.in.network | 267 |
1 files changed, 267 insertions, 0 deletions
diff --git a/target/waldux/config/Config.in.network b/target/waldux/config/Config.in.network new file mode 100644 index 000000000..afbf36c7a --- /dev/null +++ b/target/waldux/config/Config.in.network @@ -0,0 +1,267 @@ +# This file is part of the OpenADK project. OpenADK is copyrighted +# material, please see the LICENCE file in the top-level directory. + +menu "Network support" +depends on ADK_TARGET_WITH_NET \ + || ADK_TARGET_GENERIC + +config ADK_WALDUX_KERNEL_NETDEVICES + bool + +config ADK_WALDUX_KERNEL_ETHERNET + bool + +config ADK_WALDUX_KERNEL_NET + bool + +config ADK_WALDUX_KERNEL_PACKET + bool + +config ADK_WALDUX_KERNEL_UNIX + bool + +config ADK_WALDUX_KERNEL_NET_CORE + bool + +config ADK_WALDUX_KERNEL_INET + bool "Enable TCP/IP support" + select ADK_WALDUX_KERNEL_NET + select ADK_WALDUX_KERNEL_UNIX + select ADK_WALDUX_KERNEL_PACKET + select ADK_WALDUX_KERNEL_NET_CORE + select ADK_WALDUX_KERNEL_NETDEVICES + select ADK_WALDUX_KERNEL_ETHERNET + select ADK_WALDUX_KERNEL_CRYPTO + select ADK_WALDUX_KERNEL_CRYPTO_AES + default y + +config ADK_WALDUX_KERNEL_IP_FIB_HASH + bool + default y + +config ADK_WALDUX_KERNEL_IPV6 + tristate "Enable IPv6 support" + select BUSYBOX_FEATURE_IPV6 + help + This is complemental support for the IP version 6. + You will still be able to do traditional IPv4 networking as well. + + For general information about IPv6, see + <http://playground.sun.com/pub/ipng/html/ipng-main.html>. + For Linux IPv6 development information, see <http://www.linux-ipv6.org>. + For specific information about IPv6 under Linux, read the HOWTO at + <http://www.bieringer.de/linux/IPv6/>. + +config ADK_WALDUX_KERNEL_IPV6_SIT + tristate "IPv6-in-IPv4 tunnel (SIT driver)" + select ADK_WALDUX_KERNEL_INET_TUNNEL + select ADK_WALDUX_KERNEL_NET_IP_TUNNEL + help + Tunneling means encapsulating data of one protocol type within + another protocol and sending it over a channel that understands the + encapsulating protocol. This driver implements encapsulation of IPv6 + into IPv4 packets. This is useful if you want to connect two IPv6 + networks over an IPv4-only path. + +config ADK_WALDUX_KERNEL_SYN_COOKIES + bool "TCP syncookie support" + +config ADK_WALDUX_KERNEL_IP_PNP_BOOTP + bool + +config ADK_WALDUX_KERNEL_IP_PNP_RARP + bool + +config ADK_WALDUX_KERNEL_NET_IPGRE_BROADCAST + bool + +config ADK_WALDUX_KERNEL_NET_IPGRE_DEMUX + bool + +config ADK_WALDUX_KERNEL_PPP_ASYNC + bool + +config ADK_WALDUX_KERNEL_SLHC + bool + +config ADK_WALDUX_KERNEL_IMQ + tristate + +config ADK_WALDUX_KERNEL_LLC + tristate + +config ADK_WALDUX_KERNEL_IP_MULTICAST + bool "Enable IP Multicasting" + +config ADK_WALDUX_KERNEL_IP_MROUTE + bool "Enable IP Multicasting Routing" + +config ADK_WALDUX_KERNEL_ATM + tristate "Asynchronous Transfer Mode (ATM)" + help + ATM is a high-speed networking technology for Local Area Networks + and Wide Area Networks. It uses a fixed packet size and is + connection oriented, allowing for the negotiation of minimum + bandwidth requirements. + + In order to participate in an ATM network, your Linux box needs an + ATM networking card. If you have that, say Y here and to the driver + of your ATM card below. + + Note that you need a set of user-space programs to actually make use + of ATM. See the file <file:Documentation/networking/atm.txt> for + further details. + +config ADK_WALDUX_KERNEL_ATM_BR2684 + tristate "BR2684 ATM module" + select ADK_WALDUX_KERNEL_ATM + +config ADK_WALDUX_KERNEL_BRIDGE + tristate "802.1d Ethernet Bridging" + select ADK_WALDUX_KERNEL_LLC + help + If you say Y here, then your Linux box will be able to act as an + Ethernet bridge, which means that the different Ethernet segments it + is connected to will appear as one Ethernet to the participants. + Several such bridges can work together to create even larger + networks of Ethernets using the IEEE 802.1 spanning tree algorithm. + As this is a standard, Linux bridges will cooperate properly with + other third party bridge products. + + In order to use the Ethernet bridge, you'll need the bridge + configuration tools; see <file:Documentation/networking/bridge.txt> + for location. Please read the Bridge mini-HOWTO for more + information. + + If you enable iptables support along with the bridge support then you + turn your bridge into a bridging IP firewall. + iptables will then see the IP packets being bridged, so you need to + take this into account when setting up your firewall rules. + Enabling arptables support when bridging will let arptables see + bridged ARP traffic in the arptables FORWARD chain. + +config ADK_WALDUX_KERNEL_VLAN_8021Q + tristate "802.1q VLAN support" + help + Select this and you will be able to create 802.1Q VLAN interfaces + on your ethernet interfaces. 802.1Q VLAN supports almost + everything a regular ethernet interface does, including + firewalling, bridging, and of course IP traffic. You will need + the 'vconfig' tool from the VLAN project in order to effectively + use VLANs. See the VLAN web page for more information: + <http://www.candelatech.com/~greear/vlan.html> + +config ADK_WALDUX_KERNEL_INET_TUNNEL + tristate + +config ADK_WALDUX_KERNEL_NET_IP_TUNNEL + tristate + default n + +config ADK_WALDUX_KERNEL_NET_IPIP + tristate "IP in IP encapsulation support" + select ADK_WALDUX_KERNEL_INET_TUNNEL + select ADK_WALDUX_KERNEL_NET_IP_TUNNEL + help + Tunneling means encapsulating data of one protocol type within + another protocol and sending it over a channel that understands the + encapsulating protocol. This particular tunneling driver implements + encapsulation of IP within IP, which sounds kind of pointless, but + can be useful if you want to make your (or some other) machine + appear on a different network than it physically is, or to use + mobile-IP facilities (allowing laptops to seamlessly move between + networks without changing their IP addresses). + +config ADK_WALDUX_KERNEL_NET_IPGRE + tristate "GRE tunnels over IP" + select ADK_WALDUX_KERNEL_NET_IPGRE_BROADCAST + select ADK_WALDUX_KERNEL_NET_IPGRE_DEMUX + select ADK_WALDUX_KERNEL_NET_IP_TUNNEL + help + Tunneling means encapsulating data of one protocol type within + another protocol and sending it over a channel that understands the + encapsulating protocol. This particular tunneling driver implements + GRE (Generic Routing Encapsulation) and at this time allows + encapsulating of IPv4 or IPv6 over existing IPv4 infrastructure. + This driver is useful if the other endpoint is a Cisco router: Cisco + likes GRE much better than the other Linux tunneling driver ("IP + tunneling" above). In addition, GRE allows multicast redistribution + through the tunnel. + +config ADK_WALDUX_KERNEL_PPP + tristate "PPP support" + select ADK_WALDUX_KERNEL_PPP_ASYNC + select ADK_WALDUX_KERNEL_SLHC + select ADK_WALDUX_KERNEL_CRC_CCITT + help + PPP (Point to Point Protocol) is a newer and better SLIP. It serves + the same purpose: sending Internet traffic over telephone (and other + serial) lines. Ask your access provider if they support it, because + otherwise you can't use it; most Internet access providers these + days support PPP rather than SLIP. + + To use PPP, you need an additional program called pppd as described + in the PPP-HOWTO, available at + <http://www.tldp.org/docs.html#howto>. Make sure that you have + the version of pppd recommended in <file:Documentation/Changes>. + The PPP option enlarges your kernel by about 16 KB. + + There are actually two versions of PPP: the traditional PPP for + asynchronous lines, such as regular analog phone lines, and + synchronous PPP which can be used over digital ISDN lines for + example. If you want to use PPP over phone lines or other + asynchronous serial lines, you need to say Y (or M) here and also to + the next option, "PPP support for async serial ports". For PPP over + synchronous lines, you should say Y (or M) here and to "Support + synchronous PPP", below. + +config ADK_WALDUX_KERNEL_PPP_MPPE + tristate "PPP MPPE/MPPC module" + depends on ADK_WALDUX_KERNEL_PPP + select ADK_WALDUX_KERNEL_CRYPTO + select ADK_WALDUX_KERNEL_CRYPTO_ARC4 + select ADK_WALDUX_KERNEL_CRYPTO_SHA1 + select ADK_WALDUX_KERNEL_CRYPTO_ECB + help + Support for the MPPE Encryption protocol, as employed by the + Microsoft Point-to-Point Tunneling Protocol. + + See http://pptpclient.sourceforge.net/ for information on + configuring PPTP clients and servers to utilize this method. + +config ADK_WALDUX_KERNEL_PPPOATM + tristate "PPPoA (PPP over ATM) kernel support" + depends on ADK_WALDUX_KERNEL_PPP + select ADK_WALDUX_KERNEL_ATM + help + Support for PPP over ATM + +config ADK_WALDUX_KERNEL_PPPOE + tristate "PPPoE (PPP over Ethernet) kernel support" + depends on ADK_WALDUX_KERNEL_PPP + help + Support for PPP over Ethernet + +config ADK_WALDUX_KERNEL_TUN + tristate "Universal TUN/TAP driver" + help + Kernel support for the TUN/TAP tunneling device + +config ADK_WALDUX_KERNEL_BONDING + tristate "Bonding driver support" + help + Say 'Y' or 'M' if you wish to be able to 'bond' multiple Ethernet + Channels together. This is called 'Etherchannel' by Cisco, + 'Trunking' by Sun, 802.3ad by the IEEE, and 'Bonding' in Linux. + + The driver supports multiple bonding modes to allow for both high + performance and high availability operation. + + Refer to <file:Documentation/networking/bonding.txt> for more + information. + +source target/waldux//config/Config.in.sched +source target/waldux//config/Config.in.ipsec +source target/waldux//config/Config.in.ipvs + +endmenu |