summaryrefslogtreecommitdiff
path: root/target/rb433/patches/ar71xx.patch
diff options
context:
space:
mode:
Diffstat (limited to 'target/rb433/patches/ar71xx.patch')
-rw-r--r--target/rb433/patches/ar71xx.patch9913
1 files changed, 9913 insertions, 0 deletions
diff --git a/target/rb433/patches/ar71xx.patch b/target/rb433/patches/ar71xx.patch
new file mode 100644
index 000000000..3646174f4
--- /dev/null
+++ b/target/rb433/patches/ar71xx.patch
@@ -0,0 +1,9913 @@
+diff -Nur linux-2.6.29.1.orig/arch/mips/Kconfig linux-2.6.29.1/arch/mips/Kconfig
+--- linux-2.6.29.1.orig/arch/mips/Kconfig 2009-04-02 22:55:27.000000000 +0200
++++ linux-2.6.29.1/arch/mips/Kconfig 2009-04-13 14:27:23.734393467 +0200
+@@ -22,6 +22,23 @@
+ config MACH_ALCHEMY
+ bool "Alchemy processor based machines"
+
++config ATHEROS_AR71XX
++ bool "Atheros AR71xx based boards"
++ select CEVT_R4K
++ select CSRC_R4K
++ select DMA_NONCOHERENT
++ select HW_HAS_PCI
++ select IRQ_CPU
++ select ARCH_REQUIRE_GPIOLIB
++ select SYS_HAS_CPU_MIPS32_R1
++ select SYS_HAS_CPU_MIPS32_R2
++ select SYS_SUPPORTS_32BIT_KERNEL
++ select SYS_SUPPORTS_BIG_ENDIAN
++ select SYS_HAS_EARLY_PRINTK
++ select MIPS_MACHINE
++ help
++ Support for Atheros AR71xx based boards.
++
+ config BASLER_EXCITE
+ bool "Basler eXcite smart camera"
+ select CEVT_R4K
+@@ -640,6 +657,7 @@
+ endchoice
+
+ source "arch/mips/alchemy/Kconfig"
++source "arch/mips/ar71xx/Kconfig"
+ source "arch/mips/basler/excite/Kconfig"
+ source "arch/mips/jazz/Kconfig"
+ source "arch/mips/lasat/Kconfig"
+@@ -810,6 +828,9 @@
+ config SYNC_R4K
+ bool
+
++config MIPS_MACHINE
++ def_bool n
++
+ config NO_IOPORT
+ def_bool n
+
+diff -Nur linux-2.6.29.1.orig/arch/mips/Makefile linux-2.6.29.1/arch/mips/Makefile
+--- linux-2.6.29.1.orig/arch/mips/Makefile 2009-04-02 22:55:27.000000000 +0200
++++ linux-2.6.29.1/arch/mips/Makefile 2009-04-13 14:27:34.483063970 +0200
+@@ -602,6 +602,14 @@
+ load-$(CONFIG_CPU_CAVIUM_OCTEON) += 0xffffffff81100000
+ endif
+
++#
++# Atheros AR71xx
++#
++core-$(CONFIG_ATHEROS_AR71XX) += arch/mips/ar71xx/
++cflags-$(CONFIG_ATHEROS_AR71XX) += -I$(srctree)/arch/mips/include/asm/mach-ar71xx
++load-$(CONFIG_ATHEROS_AR71XX) += 0xffffffff80060000
++
++
+ cflags-y += -I$(srctree)/arch/mips/include/asm/mach-generic
+ drivers-$(CONFIG_PCI) += arch/mips/pci/
+
+diff -Nur linux-2.6.29.1.orig/arch/mips/ar71xx/Kconfig linux-2.6.29.1/arch/mips/ar71xx/Kconfig
+--- linux-2.6.29.1.orig/arch/mips/ar71xx/Kconfig 1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.29.1/arch/mips/ar71xx/Kconfig 2009-04-13 14:27:34.483063970 +0200
+@@ -0,0 +1,64 @@
++if ATHEROS_AR71XX
++
++config AR71XX_EARLY_SERIAL
++ bool "Use early serial console"
++ default n
++
++menu "Atheros AR71xx machine selection"
++
++config AR71XX_MACH_AP81
++ bool "Atheros AP81 board support"
++ default y
++
++config AR71XX_MACH_AP83
++ bool "Atheros AP83 board support"
++ default y
++
++config AR71XX_MACH_PB42
++ bool "Atheros PB42 board support"
++ default y
++
++config AR71XX_MACH_AW_NR580
++ bool "AzureWave AW-NR580 board support"
++ default y
++
++config AR71XX_MACH_GENERIC
++ bool "Generic AR71xx based machine support"
++ default y
++
++config AR71XX_MACH_WP543
++ bool "Compex WP543 board support"
++ select MYLOADER
++ default y
++
++config AR71XX_MACH_RB_4XX
++ bool "MikroTik RouterBOARD 4xx series support"
++ default y
++
++config AR71XX_MACH_WNR2000
++ bool "NETGEAR WNR2000 board support"
++ default y
++
++config AR71XX_MACH_MZK_W04NU
++ bool "Planex MZK-W04NU board support"
++ default y
++
++config AR71XX_MACH_MZK_W300NH
++ bool "Planex MZK-W300NH board support"
++ default y
++
++config AR71XX_MACH_TL_WR941ND
++ bool "TP-LINK TL-WR941ND support"
++ default y
++
++config AR71XX_MACH_TEW_632BRP
++ bool "TRENDnet TEW-632BRP support"
++ default y
++
++config AR71XX_MACH_UBNT
++ bool "Ubiquiti AR71xx based boards support"
++ default y
++
++endmenu
++
++endif
+diff -Nur linux-2.6.29.1.orig/arch/mips/ar71xx/Makefile linux-2.6.29.1/arch/mips/ar71xx/Makefile
+--- linux-2.6.29.1.orig/arch/mips/ar71xx/Makefile 1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.29.1/arch/mips/ar71xx/Makefile 2009-04-13 14:27:34.487064480 +0200
+@@ -0,0 +1,25 @@
++#
++# Makefile for the Atheros AR71xx SoC specific parts of the kernel
++#
++# Copyright (C) 2008-2009 Gabor Juhos <juhosg@openwrt.org>
++# Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org>
++#
++# This program is free software; you can redistribute it and/or modify it
++# under the terms of the GNU General Public License version 2 as published
++# by the Free Software Foundation.
++
++obj-y := prom.o irq.o setup.o devices.o gpio.o ar71xx.o
++
++obj-$(CONFIG_AR71XX_MACH_AP81) += mach-ap81.o
++obj-$(CONFIG_AR71XX_MACH_AP83) += mach-ap83.o
++obj-$(CONFIG_AR71XX_MACH_AW_NR580) += mach-aw-nr580.o
++obj-$(CONFIG_AR71XX_MACH_GENERIC) += mach-generic.o
++obj-$(CONFIG_AR71XX_MACH_MZK_W04NU) += mach-mzk-w04nu.o
++obj-$(CONFIG_AR71XX_MACH_MZK_W300NH) += mach-mzk-w300nh.o
++obj-$(CONFIG_AR71XX_MACH_PB42) += mach-pb42.o
++obj-$(CONFIG_AR71XX_MACH_RB_4XX) += mach-rb-4xx.o
++obj-$(CONFIG_AR71XX_MACH_TEW_632BRP) += mach-tew-632brp.o
++obj-$(CONFIG_AR71XX_MACH_TL_WR941ND) += mach-tl-wr941nd.o
++obj-$(CONFIG_AR71XX_MACH_UBNT) += mach-ubnt.o
++obj-$(CONFIG_AR71XX_MACH_WNR2000) += mach-wnr2000.o
++obj-$(CONFIG_AR71XX_MACH_WP543) += mach-wp543.o
+diff -Nur linux-2.6.29.1.orig/arch/mips/ar71xx/ar71xx.c linux-2.6.29.1/arch/mips/ar71xx/ar71xx.c
+--- linux-2.6.29.1.orig/arch/mips/ar71xx/ar71xx.c 1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.29.1/arch/mips/ar71xx/ar71xx.c 2009-04-13 14:27:34.487064480 +0200
+@@ -0,0 +1,100 @@
++/*
++ * AR71xx SoC routines
++ *
++ * Copyright (C) 2008 Gabor Juhos <juhosg@openwrt.org>
++ * Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org>
++ *
++ * This program is free software; you can redistribute it and/or modify it
++ * under the terms of the GNU General Public License version 2 as published
++ * by the Free Software Foundation.
++ */
++
++#include <linux/kernel.h>
++#include <linux/module.h>
++#include <linux/types.h>
++
++#include <asm/mach-ar71xx/ar71xx.h>
++
++void __iomem *ar71xx_ddr_base;
++EXPORT_SYMBOL_GPL(ar71xx_ddr_base);
++
++void __iomem *ar71xx_pll_base;
++EXPORT_SYMBOL_GPL(ar71xx_pll_base);
++
++void __iomem *ar71xx_reset_base;
++EXPORT_SYMBOL_GPL(ar71xx_reset_base);
++
++void __iomem *ar71xx_gpio_base;
++EXPORT_SYMBOL_GPL(ar71xx_gpio_base);
++
++void __iomem *ar71xx_usb_ctrl_base;
++EXPORT_SYMBOL_GPL(ar71xx_usb_ctrl_base);
++
++void ar71xx_device_stop(u32 mask)
++{
++ unsigned long flags;
++ u32 t;
++
++ switch (ar71xx_soc) {
++ case AR71XX_SOC_AR7130:
++ case AR71XX_SOC_AR7141:
++ case AR71XX_SOC_AR7161:
++ local_irq_save(flags);
++ t = ar71xx_reset_rr(AR71XX_RESET_REG_RESET_MODULE);
++ ar71xx_reset_wr(AR71XX_RESET_REG_RESET_MODULE, t | mask);
++ local_irq_restore(flags);
++ break;
++
++ case AR71XX_SOC_AR9130:
++ case AR71XX_SOC_AR9132:
++ local_irq_save(flags);
++ t = ar71xx_reset_rr(AR91XX_RESET_REG_RESET_MODULE);
++ ar71xx_reset_wr(AR91XX_RESET_REG_RESET_MODULE, t | mask);
++ local_irq_restore(flags);
++ break;
++
++ default:
++ BUG();
++ }
++}
++EXPORT_SYMBOL_GPL(ar71xx_device_stop);
++
++void ar71xx_device_start(u32 mask)
++{
++ unsigned long flags;
++ u32 t;
++
++ switch (ar71xx_soc) {
++ case AR71XX_SOC_AR7130:
++ case AR71XX_SOC_AR7141:
++ case AR71XX_SOC_AR7161:
++ local_irq_save(flags);
++ t = ar71xx_reset_rr(AR71XX_RESET_REG_RESET_MODULE);
++ ar71xx_reset_wr(AR71XX_RESET_REG_RESET_MODULE, t & ~mask);
++ local_irq_restore(flags);
++ break;
++
++ case AR71XX_SOC_AR9130:
++ case AR71XX_SOC_AR9132:
++ local_irq_save(flags);
++ t = ar71xx_reset_rr(AR91XX_RESET_REG_RESET_MODULE);
++ ar71xx_reset_wr(AR91XX_RESET_REG_RESET_MODULE, t & ~mask);
++ local_irq_restore(flags);
++ break;
++
++ default:
++ BUG();
++ }
++}
++EXPORT_SYMBOL_GPL(ar71xx_device_start);
++
++void ar71xx_ddr_flush(u32 reg)
++{
++ ar71xx_ddr_wr(reg, 1);
++ while ((ar71xx_ddr_rr(reg) & 0x1));
++
++ ar71xx_ddr_wr(reg, 1);
++ while ((ar71xx_ddr_rr(reg) & 0x1));
++}
++EXPORT_SYMBOL_GPL(ar71xx_ddr_flush);
++
+diff -Nur linux-2.6.29.1.orig/arch/mips/ar71xx/devices.c linux-2.6.29.1/arch/mips/ar71xx/devices.c
+--- linux-2.6.29.1.orig/arch/mips/ar71xx/devices.c 1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.29.1/arch/mips/ar71xx/devices.c 2009-04-13 14:27:34.491064431 +0200
+@@ -0,0 +1,675 @@
++/*
++ * Atheros AR71xx SoC platform devices
++ *
++ * Copyright (C) 2008-2009 Gabor Juhos <juhosg@openwrt.org>
++ * Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org>
++ *
++ * Parts of this file are based on Atheros' 2.6.15 BSP
++ *
++ * This program is free software; you can redistribute it and/or modify it
++ * under the terms of the GNU General Public License version 2 as published
++ * by the Free Software Foundation.
++ */
++
++#include <linux/kernel.h>
++#include <linux/init.h>
++#include <linux/delay.h>
++#include <linux/dma-mapping.h>
++#include <linux/etherdevice.h>
++#include <linux/platform_device.h>
++#include <linux/serial_8250.h>
++#include <linux/ath9k_platform.h>
++
++#include <asm/mach-ar71xx/ar71xx.h>
++
++#include "devices.h"
++
++static u8 ar71xx_mac_base[ETH_ALEN] __initdata;
++
++/*
++ * OHCI (USB full speed host controller)
++ */
++static struct resource ar71xx_ohci_resources[] = {
++ [0] = {
++ .start = AR71XX_OHCI_BASE,
++ .end = AR71XX_OHCI_BASE + AR71XX_OHCI_SIZE - 1,
++ .flags = IORESOURCE_MEM,
++ },
++ [1] = {
++ .start = AR71XX_MISC_IRQ_OHCI,
++ .end = AR71XX_MISC_IRQ_OHCI,
++ .flags = IORESOURCE_IRQ,
++ },
++};
++
++static u64 ar71xx_ohci_dmamask = DMA_BIT_MASK(32);
++static struct platform_device ar71xx_ohci_device = {
++ .name = "ar71xx-ohci",
++ .id = -1,
++ .resource = ar71xx_ohci_resources,
++ .num_resources = ARRAY_SIZE(ar71xx_ohci_resources),
++ .dev = {
++ .dma_mask = &ar71xx_ohci_dmamask,
++ .coherent_dma_mask = DMA_BIT_MASK(32),
++ },
++};
++
++/*
++ * EHCI (USB full speed host controller)
++ */
++static struct resource ar71xx_ehci_resources[] = {
++ [0] = {
++ .start = AR71XX_EHCI_BASE,
++ .end = AR71XX_EHCI_BASE + AR71XX_EHCI_SIZE - 1,
++ .flags = IORESOURCE_MEM,
++ },
++ [1] = {
++ .start = AR71XX_CPU_IRQ_USB,
++ .end = AR71XX_CPU_IRQ_USB,
++ .flags = IORESOURCE_IRQ,
++ },
++};
++
++
++static u64 ar71xx_ehci_dmamask = DMA_BIT_MASK(32);
++static struct ar71xx_ehci_platform_data ar71xx_ehci_data;
++
++static struct platform_device ar71xx_ehci_device = {
++ .name = "ar71xx-ehci",
++ .id = -1,
++ .resource = ar71xx_ehci_resources,
++ .num_resources = ARRAY_SIZE(ar71xx_ehci_resources),
++ .dev = {
++ .dma_mask = &ar71xx_ehci_dmamask,
++ .coherent_dma_mask = DMA_BIT_MASK(32),
++ .platform_data = &ar71xx_ehci_data,
++ },
++};
++
++#define AR71XX_USB_RESET_MASK \
++ (RESET_MODULE_USB_HOST | RESET_MODULE_USB_PHY \
++ | RESET_MODULE_USB_OHCI_DLL)
++
++static void ar71xx_usb_setup(void)
++{
++ ar71xx_device_stop(AR71XX_USB_RESET_MASK);
++ mdelay(1000);
++ ar71xx_device_start(AR71XX_USB_RESET_MASK);
++
++ /* Turning on the Buff and Desc swap bits */
++ ar71xx_usb_ctrl_wr(USB_CTRL_REG_CONFIG, 0xf0000);
++
++ /* WAR for HW bug. Here it adjusts the duration between two SOFS */
++ ar71xx_usb_ctrl_wr(USB_CTRL_REG_FLADJ, 0x20c00);
++
++ mdelay(900);
++}
++
++static void ar91xx_usb_setup(void)
++{
++ ar71xx_device_stop(RESET_MODULE_USBSUS_OVERRIDE);
++ mdelay(10);
++
++ ar71xx_device_start(RESET_MODULE_USB_HOST);
++ mdelay(10);
++
++ ar71xx_device_start(RESET_MODULE_USB_PHY);
++ mdelay(10);
++}
++
++void __init ar71xx_add_device_usb(void)
++{
++ switch (ar71xx_soc) {
++ case AR71XX_SOC_AR7130:
++ case AR71XX_SOC_AR7141:
++ case AR71XX_SOC_AR7161:
++ ar71xx_usb_setup();
++ platform_device_register(&ar71xx_ohci_device);
++ platform_device_register(&ar71xx_ehci_device);
++ break;
++
++ case AR71XX_SOC_AR9130:
++ case AR71XX_SOC_AR9132:
++ ar91xx_usb_setup();
++ ar71xx_ehci_data.is_ar91xx = 1;
++ platform_device_register(&ar71xx_ehci_device);
++ break;
++
++ default:
++ BUG();
++ }
++}
++
++#ifndef CONFIG_AR71XX_EARLY_SERIAL
++static struct resource ar71xx_uart_resources[] = {
++ {
++ .start = AR71XX_UART_BASE,
++ .end = AR71XX_UART_BASE + AR71XX_UART_SIZE - 1,
++ .flags = IORESOURCE_MEM,
++ },
++};
++
++#define AR71XX_UART_FLAGS (UPF_BOOT_AUTOCONF | UPF_SKIP_TEST | UPF_IOREMAP)
++static struct plat_serial8250_port ar71xx_uart_data[] = {
++ {
++ .mapbase = AR71XX_UART_BASE,
++ .irq = AR71XX_MISC_IRQ_UART,
++ .flags = AR71XX_UART_FLAGS,
++ .iotype = UPIO_MEM32,
++ .regshift = 2,
++ }, {
++ /* terminating entry */
++ }
++};
++
++static struct platform_device ar71xx_uart_device = {
++ .name = "serial8250",
++ .id = PLAT8250_DEV_PLATFORM,
++ .resource = ar71xx_uart_resources,
++ .num_resources = ARRAY_SIZE(ar71xx_uart_resources),
++ .dev = {
++ .platform_data = ar71xx_uart_data
++ },
++};
++
++void __init ar71xx_add_device_uart(void)
++{
++ ar71xx_uart_data[0].uartclk = ar71xx_ahb_freq;
++ platform_device_register(&ar71xx_uart_device);
++}
++#endif /* CONFIG_AR71XX_EARLY_SERIAL */
++
++static struct resource ar71xx_mdio_resources[] = {
++ {
++ .name = "mdio_base",
++ .flags = IORESOURCE_MEM,
++ .start = AR71XX_GE0_BASE + 0x20,
++ .end = AR71XX_GE0_BASE + 0x38 - 1,
++ }
++};
++
++static struct ag71xx_mdio_platform_data ar71xx_mdio_data = {
++ .phy_mask = 0xffffffff,
++};
++
++static struct platform_device ar71xx_mdio_device = {
++ .name = "ag71xx-mdio",
++ .id = -1,
++ .resource = ar71xx_mdio_resources,
++ .num_resources = ARRAY_SIZE(ar71xx_mdio_resources),
++ .dev = {
++ .platform_data = &ar71xx_mdio_data,
++ },
++};
++
++void __init ar71xx_add_device_mdio(u32 phy_mask)
++{
++ ar71xx_mdio_data.phy_mask = phy_mask;
++ platform_device_register(&ar71xx_mdio_device);
++}
++
++static void ar71xx_set_pll(u32 cfg_reg, u32 pll_reg, u32 pll_val, u32 shift)
++{
++ void __iomem *base;
++ u32 t;
++
++ base = ioremap_nocache(AR71XX_PLL_BASE, AR71XX_PLL_SIZE);
++
++ t = __raw_readl(base + cfg_reg);
++ t &= ~(3 << shift);
++ t |= (2 << shift);
++ __raw_writel(t, base + cfg_reg);
++ udelay(100);
++
++ __raw_writel(pll_val, base + pll_reg);
++
++ t |= (3 << shift);
++ __raw_writel(t, base + cfg_reg);
++ udelay(100);
++
++ t &= ~(3 << shift);
++ __raw_writel(t, base + cfg_reg);
++ udelay(100);
++
++ printk(KERN_DEBUG "ar71xx: pll_reg %#x: %#x\n",
++ (unsigned int)(base + pll_reg), __raw_readl(base + pll_reg));
++
++ iounmap(base);
++}
++
++static void ar71xx_set_pll_ge0(u32 val)
++{
++ ar71xx_set_pll(AR71XX_PLL_REG_SEC_CONFIG, AR71XX_PLL_REG_ETH0_INT_CLOCK,
++ val, AR71XX_ETH0_PLL_SHIFT);
++}
++
++static void ar71xx_set_pll_ge1(u32 val)
++{
++ ar71xx_set_pll(AR71XX_PLL_REG_SEC_CONFIG, AR71XX_PLL_REG_ETH1_INT_CLOCK,
++ val, AR71XX_ETH1_PLL_SHIFT);
++}
++
++static void ar91xx_set_pll_ge0(u32 val)
++{
++ ar71xx_set_pll(AR91XX_PLL_REG_ETH_CONFIG, AR91XX_PLL_REG_ETH0_INT_CLOCK,
++ val, AR91XX_ETH0_PLL_SHIFT);
++}
++
++static void ar91xx_set_pll_ge1(u32 val)
++{
++ ar71xx_set_pll(AR91XX_PLL_REG_ETH_CONFIG, AR91XX_PLL_REG_ETH1_INT_CLOCK,
++ val, AR91XX_ETH1_PLL_SHIFT);
++}
++
++static void ar71xx_ddr_flush_ge0(void)
++{
++ ar71xx_ddr_flush(AR71XX_DDR_REG_FLUSH_GE0);
++}
++
++static void ar71xx_ddr_flush_ge1(void)
++{
++ ar71xx_ddr_flush(AR71XX_DDR_REG_FLUSH_GE1);
++}
++
++static void ar91xx_ddr_flush_ge0(void)
++{
++ ar71xx_ddr_flush(AR91XX_DDR_REG_FLUSH_GE0);
++}
++
++static void ar91xx_ddr_flush_ge1(void)
++{
++ ar71xx_ddr_flush(AR91XX_DDR_REG_FLUSH_GE1);
++}
++
++static struct resource ar71xx_eth0_resources[] = {
++ {
++ .name = "mac_base",
++ .flags = IORESOURCE_MEM,
++ .start = AR71XX_GE0_BASE,
++ .end = AR71XX_GE0_BASE + 0x20 - 1,
++ }, {
++ .name = "mac_base2",
++ .flags = IORESOURCE_MEM,
++ .start = AR71XX_GE0_BASE + 0x38,
++ .end = AR71XX_GE0_BASE + 0x200 - 1,
++ }, {
++ .name = "mii_ctrl",
++ .flags = IORESOURCE_MEM,
++ .start = AR71XX_MII_BASE + MII_REG_MII0_CTRL,
++ .end = AR71XX_MII_BASE + MII_REG_MII0_CTRL + 3,
++ }, {
++ .name = "mac_irq",
++ .flags = IORESOURCE_IRQ,
++ .start = AR71XX_CPU_IRQ_GE0,
++ .end = AR71XX_CPU_IRQ_GE0,
++ },
++};
++
++struct ag71xx_platform_data ar71xx_eth0_data = {
++ .reset_bit = RESET_MODULE_GE0_MAC,
++};
++
++static struct platform_device ar71xx_eth0_device = {
++ .name = "ag71xx",
++ .id = 0,
++ .resource = ar71xx_eth0_resources,
++ .num_resources = ARRAY_SIZE(ar71xx_eth0_resources),
++ .dev = {
++ .platform_data = &ar71xx_eth0_data,
++ },
++};
++
++static struct resource ar71xx_eth1_resources[] = {
++ {
++ .name = "mac_base",
++ .flags = IORESOURCE_MEM,
++ .start = AR71XX_GE1_BASE,
++ .end = AR71XX_GE1_BASE + 0x20 - 1,
++ }, {
++ .name = "mac_base2",
++ .flags = IORESOURCE_MEM,
++ .start = AR71XX_GE1_BASE + 0x38,
++ .end = AR71XX_GE1_BASE + 0x200 - 1,
++ }, {
++ .name = "mii_ctrl",
++ .flags = IORESOURCE_MEM,
++ .start = AR71XX_MII_BASE + MII_REG_MII1_CTRL,
++ .end = AR71XX_MII_BASE + MII_REG_MII1_CTRL + 3,
++ }, {
++ .name = "mac_irq",
++ .flags = IORESOURCE_IRQ,
++ .start = AR71XX_CPU_IRQ_GE1,
++ .end = AR71XX_CPU_IRQ_GE1,
++ },
++};
++
++struct ag71xx_platform_data ar71xx_eth1_data = {
++ .reset_bit = RESET_MODULE_GE1_MAC,
++};
++
++static struct platform_device ar71xx_eth1_device = {
++ .name = "ag71xx",
++ .id = 1,
++ .resource = ar71xx_eth1_resources,
++ .num_resources = ARRAY_SIZE(ar71xx_eth1_resources),
++ .dev = {
++ .platform_data = &ar71xx_eth1_data,
++ },
++};
++
++static int ar71xx_eth_instance __initdata;
++void __init ar71xx_add_device_eth(unsigned int id)
++{
++ struct platform_device *pdev;
++ struct ag71xx_platform_data *pdata;
++
++ switch (id) {
++ case 0:
++ switch (ar71xx_eth0_data.phy_if_mode) {
++ case PHY_INTERFACE_MODE_MII:
++ ar71xx_eth0_data.mii_if = MII0_CTRL_IF_MII;
++ break;
++ case PHY_INTERFACE_MODE_GMII:
++ ar71xx_eth0_data.mii_if = MII0_CTRL_IF_GMII;
++ break;
++ case PHY_INTERFACE_MODE_RGMII:
++ ar71xx_eth0_data.mii_if = MII0_CTRL_IF_RGMII;
++ break;
++ case PHY_INTERFACE_MODE_RMII:
++ ar71xx_eth0_data.mii_if = MII0_CTRL_IF_RMII;
++ break;
++ default:
++ printk(KERN_ERR "ar71xx: invalid PHY interface mode "
++ "for eth0\n");
++ return;
++ }
++ pdev = &ar71xx_eth0_device;
++ break;
++ case 1:
++ switch (ar71xx_eth1_data.phy_if_mode) {
++ case PHY_INTERFACE_MODE_RMII:
++ ar71xx_eth1_data.mii_if = MII1_CTRL_IF_RMII;
++ break;
++ case PHY_INTERFACE_MODE_RGMII:
++ ar71xx_eth1_data.mii_if = MII1_CTRL_IF_RGMII;
++ break;
++ default:
++ printk(KERN_ERR "ar71xx: invalid PHY interface mode "
++ "for eth1\n");
++ return;
++ }
++ pdev = &ar71xx_eth1_device;
++ break;
++ default:
++ printk(KERN_ERR "ar71xx: invalid ethernet id %d\n", id);
++ return;
++ }
++
++ pdata = pdev->dev.platform_data;
++
++ switch (ar71xx_soc) {
++ case AR71XX_SOC_AR7130:
++ pdata->ddr_flush = id ? ar71xx_ddr_flush_ge1
++ : ar71xx_ddr_flush_ge0;
++ pdata->set_pll = id ? ar71xx_set_pll_ge1
++ : ar71xx_set_pll_ge0;
++ break;
++
++ case AR71XX_SOC_AR7141:
++ case AR71XX_SOC_AR7161:
++ pdata->ddr_flush = id ? ar71xx_ddr_flush_ge1
++ : ar71xx_ddr_flush_ge0;
++ pdata->set_pll = id ? ar71xx_set_pll_ge1
++ : ar71xx_set_pll_ge0;
++ pdata->has_gbit = 1;
++ break;
++
++ case AR71XX_SOC_AR9130:
++ pdata->ddr_flush = id ? ar91xx_ddr_flush_ge1
++ : ar91xx_ddr_flush_ge0;
++ pdata->set_pll = id ? ar91xx_set_pll_ge1
++ : ar91xx_set_pll_ge0;
++ pdata->is_ar91xx = 1;
++ break;
++
++ case AR71XX_SOC_AR9132:
++ pdata->ddr_flush = id ? ar91xx_ddr_flush_ge1
++ : ar91xx_ddr_flush_ge0;
++ pdata->set_pll = id ? ar91xx_set_pll_ge1
++ : ar91xx_set_pll_ge0;
++ pdata->is_ar91xx = 1;
++ pdata->has_gbit = 1;
++ break;
++
++ default:
++ BUG();
++ }
++
++ switch (pdata->phy_if_mode) {
++ case PHY_INTERFACE_MODE_GMII:
++ case PHY_INTERFACE_MODE_RGMII:
++ if (!pdata->has_gbit) {
++ printk(KERN_ERR "ar71xx: no gbit available on eth%d\n",
++ id);
++ return;
++ }
++ /* fallthrough */
++ default:
++ break;
++ }
++
++ if (is_valid_ether_addr(ar71xx_mac_base)) {
++ memcpy(pdata->mac_addr, ar71xx_mac_base, ETH_ALEN);
++ pdata->mac_addr[5] += ar71xx_eth_instance;
++ } else {
++ random_ether_addr(pdata->mac_addr);
++ printk(KERN_DEBUG
++ "ar71xx: using random MAC address for eth%d\n",
++ ar71xx_eth_instance);
++ }
++
++ platform_device_register(pdev);
++ ar71xx_eth_instance++;
++}
++
++static struct resource ar71xx_spi_resources[] = {
++ [0] = {
++ .start = AR71XX_SPI_BASE,
++ .end = AR71XX_SPI_BASE + AR71XX_SPI_SIZE - 1,
++ .flags = IORESOURCE_MEM,
++ },
++};
++
++static struct platform_device ar71xx_spi_device = {
++ .name = "ar71xx-spi",
++ .id = -1,
++ .resource = ar71xx_spi_resources,
++ .num_resources = ARRAY_SIZE(ar71xx_spi_resources),
++};
++
++void __init ar71xx_add_device_spi(struct ar71xx_spi_platform_data *pdata,
++ struct spi_board_info const *info,
++ unsigned n)
++{
++ spi_register_board_info(info, n);
++ ar71xx_spi_device.dev.platform_data = pdata;
++ platform_device_register(&ar71xx_spi_device);
++}
++
++void __init ar71xx_add_device_leds_gpio(int id, unsigned num_leds,
++ struct gpio_led *leds)
++{
++ struct platform_device *pdev;
++ struct gpio_led_platform_data pdata;
++ struct gpio_led *p;
++ int err;
++
++ p = kmalloc(num_leds * sizeof(*p), GFP_KERNEL);
++ if (!p)
++ return;
++
++ memcpy(p, leds, num_leds * sizeof(*p));
++
++ pdev = platform_device_alloc("leds-gpio", id);
++ if (!pdev)
++ goto err_free_leds;
++
++ memset(&pdata, 0, sizeof(pdata));
++ pdata.num_leds = num_leds;
++ pdata.leds = p;
++
++ err = platform_device_add_data(pdev, &pdata, sizeof(pdata));
++ if (err)
++ goto err_put_pdev;
++
++ err = platform_device_add(pdev);
++ if (err)
++ goto err_put_pdev;
++
++ return;
++
++err_put_pdev:
++ platform_device_put(pdev);
++
++err_free_leds:
++ kfree(p);
++}
++
++void __init ar71xx_add_device_gpio_buttons(int id,
++ unsigned poll_interval,
++ unsigned nbuttons,
++ struct gpio_button *buttons)
++{
++ struct platform_device *pdev;
++ struct gpio_buttons_platform_data pdata;
++ struct gpio_button *p;
++ int err;
++
++ p = kmalloc(nbuttons * sizeof(*p), GFP_KERNEL);
++ if (!p)
++ return;
++
++ memcpy(p, buttons, nbuttons * sizeof(*p));
++
++ pdev = platform_device_alloc("gpio-buttons", id);
++ if (!pdev)
++ goto err_free_buttons;
++
++ memset(&pdata, 0, sizeof(pdata));
++ pdata.poll_interval = poll_interval;
++ pdata.nbuttons = nbuttons;
++ pdata.buttons = p;
++
++ err = platform_device_add_data(pdev, &pdata, sizeof(pdata));
++ if (err)
++ goto err_put_pdev;
++
++
++ err = platform_device_add(pdev);
++ if (err)
++ goto err_put_pdev;
++
++ return;
++
++err_put_pdev:
++ platform_device_put(pdev);
++
++err_free_buttons:
++ kfree(p);
++}
++
++void __init ar71xx_add_device_wdt(void)
++{
++ platform_device_register_simple("ar71xx-wdt", -1, NULL, 0);
++}
++
++void __init ar71xx_set_mac_base(unsigned char *mac)
++{
++ memcpy(ar71xx_mac_base, mac, ETH_ALEN);
++}
++
++void __init ar71xx_parse_mac_addr(char *mac_str)
++{
++ u8 tmp[ETH_ALEN];
++ int t;
++
++ t = sscanf(mac_str, "%02hhx:%02hhx:%02hhx:%02hhx:%02hhx:%02hhx",
++ &tmp[0], &tmp[1], &tmp[2], &tmp[3], &tmp[4], &tmp[5]);
++
++ if (t != ETH_ALEN)
++ t = sscanf(mac_str, "%02hhx.%02hhx.%02hhx.%02hhx.%02hhx.%02hhx",
++ &tmp[0], &tmp[1], &tmp[2], &tmp[3], &tmp[4], &tmp[5]);
++
++ if (t == ETH_ALEN)
++ ar71xx_set_mac_base(tmp);
++ else
++ printk(KERN_DEBUG "ar71xx: failed to parse mac address "
++ "\"%s\"\n", mac_str);
++}
++
++static struct resource ar91xx_wmac_resources[] = {
++ {
++ .start = AR91XX_WMAC_BASE,
++ .end = AR91XX_WMAC_BASE + AR91XX_WMAC_SIZE - 1,
++ .flags = IORESOURCE_MEM,
++ }, {
++ .start = AR71XX_CPU_IRQ_WMAC,
++ .end = AR71XX_CPU_IRQ_WMAC,
++ .flags = IORESOURCE_IRQ,
++ },
++};
++
++static struct ath9k_platform_data ar91xx_wmac_data;
++
++static struct platform_device ar91xx_wmac_device = {
++ .name = "ath9k",
++ .id = -1,
++ .resource = ar91xx_wmac_resources,
++ .num_resources = ARRAY_SIZE(ar91xx_wmac_resources),
++ .dev = {
++ .platform_data = &ar91xx_wmac_data,
++ },
++};
++
++void __init ar91xx_add_device_wmac(void)
++{
++ u8 *ee = (u8 *) KSEG1ADDR(0x1fff1000);
++
++ memcpy(ar91xx_wmac_data.eeprom_data, ee,
++ sizeof(ar91xx_wmac_data.eeprom_data));
++
++ ar71xx_device_stop(RESET_MODULE_AMBA2WMAC);
++ mdelay(10);
++
++ ar71xx_device_start(RESET_MODULE_AMBA2WMAC);
++ mdelay(10);
++
++ platform_device_register(&ar91xx_wmac_device);
++}
++
++static struct platform_device ar71xx_dsa_switch_device = {
++ .name = "dsa",
++ .id = 0,
++};
++
++void __init ar71xx_add_device_dsa(unsigned int id,
++ struct dsa_platform_data *d)
++{
++ switch (id) {
++ case 0:
++ d->netdev = &ar71xx_eth0_device.dev;
++ break;
++ case 1:
++ d->netdev = &ar71xx_eth1_device.dev;
++ break;
++ default:
++ printk(KERN_ERR
++ "ar71xx: invalid ethernet id %d for DSA switch\n",
++ id);
++ return;
++ }
++ d->mii_bus = &ar71xx_mdio_device.dev;
++ ar71xx_dsa_switch_device.dev.platform_data = d;
++
++ platform_device_register(&ar71xx_dsa_switch_device);
++}
+diff -Nur linux-2.6.29.1.orig/arch/mips/ar71xx/devices.h linux-2.6.29.1/arch/mips/ar71xx/devices.h
+--- linux-2.6.29.1.orig/arch/mips/ar71xx/devices.h 1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.29.1/arch/mips/ar71xx/devices.h 2009-04-13 14:27:34.491064431 +0200
+@@ -0,0 +1,58 @@
++/*
++ * Atheros AR71xx SoC device definitions
++ *
++ * Copyright (C) 2008-2009 Gabor Juhos <juhosg@openwrt.org>
++ * Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org>
++ *
++ * This program is free software; you can redistribute it and/or modify it
++ * under the terms of the GNU General Public License version 2 as published
++ * by the Free Software Foundation.
++ */
++
++#ifndef __AR71XX_DEVICES_H
++#define __AR71XX_DEVICES_H
++
++#include <asm/mach-ar71xx/platform.h>
++
++#include <linux/leds.h>
++#include <linux/gpio_buttons.h>
++#include <net/dsa.h>
++
++void ar71xx_add_device_spi(struct ar71xx_spi_platform_data *pdata,
++ struct spi_board_info const *info,
++ unsigned n) __init;
++
++void ar71xx_set_mac_base(unsigned char *mac) __init;
++void ar71xx_parse_mac_addr(char *mac_str) __init;
++
++extern struct ag71xx_platform_data ar71xx_eth0_data;
++extern struct ag71xx_platform_data ar71xx_eth1_data;
++void ar71xx_add_device_eth(unsigned int id) __init;
++
++void ar71xx_add_device_mdio(u32 phy_mask) __init;
++
++void ar71xx_add_device_leds_gpio(int id,
++ unsigned num_leds,
++ struct gpio_led *leds) __init;
++
++void ar71xx_add_device_gpio_buttons(int id,
++ unsigned poll_interval,
++ unsigned nbuttons,
++ struct gpio_button *buttons) __init;
++
++void ar71xx_add_device_usb(void) __init;
++
++#ifdef CONFIG_AR71XX_EARLY_SERIAL
++static inline void ar71xx_add_device_uart(void) {}
++#else
++void ar71xx_add_device_uart(void) __init;
++#endif
++
++void ar71xx_add_device_wdt(void) __init;
++
++void ar91xx_add_device_wmac(void) __init;
++
++void ar71xx_add_device_dsa(unsigned int id,
++ struct dsa_platform_data *d) __init;
++
++#endif /* __AR71XX_DEVICES_H */
+diff -Nur linux-2.6.29.1.orig/arch/mips/ar71xx/gpio.c linux-2.6.29.1/arch/mips/ar71xx/gpio.c
+--- linux-2.6.29.1.orig/arch/mips/ar71xx/gpio.c 1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.29.1/arch/mips/ar71xx/gpio.c 2009-04-13 14:27:34.495064103 +0200
+@@ -0,0 +1,154 @@
++/*
++ * Atheros AR71xx SoC GPIO API support
++ *
++ * Copyright (C) 2008 Gabor Juhos <juhosg@openwrt.org>
++ * Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org>
++ *
++ * This program is free software; you can redistribute it and/or modify it
++ * under the terms of the GNU General Public License version 2 as published
++ * by the Free Software Foundation.
++ */
++
++#include <linux/kernel.h>
++#include <linux/init.h>
++#include <linux/module.h>
++#include <linux/types.h>
++#include <linux/spinlock.h>
++#include <linux/io.h>
++#include <linux/ioport.h>
++#include <linux/gpio.h>
++
++#include <asm/mach-ar71xx/ar71xx.h>
++
++static DEFINE_SPINLOCK(ar71xx_gpio_lock);
++
++unsigned long ar71xx_gpio_count;
++EXPORT_SYMBOL(ar71xx_gpio_count);
++
++void __ar71xx_gpio_set_value(unsigned gpio, int value)
++{
++ unsigned long flags;
++
++ spin_lock_irqsave(&ar71xx_gpio_lock, flags);
++
++ if (value)
++ ar71xx_gpio_wr(GPIO_REG_SET, (1 << gpio));
++ else
++ ar71xx_gpio_wr(GPIO_REG_CLEAR, (1 << gpio));
++
++ spin_unlock_irqrestore(&ar71xx_gpio_lock, flags);
++}
++EXPORT_SYMBOL(__ar71xx_gpio_set_value);
++
++int __ar71xx_gpio_get_value(unsigned gpio)
++{
++ return (ar71xx_gpio_rr(GPIO_REG_IN) & (1 << gpio)) ? 1 : 0;
++}
++EXPORT_SYMBOL(__ar71xx_gpio_get_value);
++
++static int ar71xx_gpio_get_value(struct gpio_chip *chip, unsigned offset)
++{
++ return __ar71xx_gpio_get_value(offset);
++}
++
++static void ar71xx_gpio_set_value(struct gpio_chip *chip,
++ unsigned offset, int value)
++{
++ __ar71xx_gpio_set_value(offset, value);
++}
++
++static int ar71xx_gpio_direction_input(struct gpio_chip *chip,
++ unsigned offset)
++{
++ unsigned long flags;
++
++ spin_lock_irqsave(&ar71xx_gpio_lock, flags);
++
++ ar71xx_gpio_wr(GPIO_REG_OE,
++ ar71xx_gpio_rr(GPIO_REG_OE) & ~(1 << offset));
++
++ spin_unlock_irqrestore(&ar71xx_gpio_lock, flags);
++
++ return 0;
++}
++
++static int ar71xx_gpio_direction_output(struct gpio_chip *chip,
++ unsigned offset, int value)
++{
++ unsigned long flags;
++
++ spin_lock_irqsave(&ar71xx_gpio_lock, flags);
++
++ if (value)
++ ar71xx_gpio_wr(GPIO_REG_SET, (1 << offset));
++ else
++ ar71xx_gpio_wr(GPIO_REG_CLEAR, (1 << offset));
++
++ ar71xx_gpio_wr(GPIO_REG_OE,
++ ar71xx_gpio_rr(GPIO_REG_OE) | (1 << offset));
++
++ spin_unlock_irqrestore(&ar71xx_gpio_lock, flags);
++
++ return 0;
++}
++
++static struct gpio_chip ar71xx_gpio_chip = {
++ .label = "ar71xx",
++ .get = ar71xx_gpio_get_value,
++ .set = ar71xx_gpio_set_value,
++ .direction_input = ar71xx_gpio_direction_input,
++ .direction_output = ar71xx_gpio_direction_output,
++ .base = 0,
++ .ngpio = AR71XX_GPIO_COUNT,
++};
++
++void ar71xx_gpio_function_enable(u32 mask)
++{
++ unsigned long flags;
++
++ spin_lock_irqsave(&ar71xx_gpio_lock, flags);
++
++ ar71xx_gpio_wr(GPIO_REG_FUNC, ar71xx_gpio_rr(GPIO_REG_FUNC) | mask);
++
++ spin_unlock_irqrestore(&ar71xx_gpio_lock, flags);
++}
++
++void ar71xx_gpio_function_disable(u32 mask)
++{
++ unsigned long flags;
++
++ spin_lock_irqsave(&ar71xx_gpio_lock, flags);
++
++ ar71xx_gpio_wr(GPIO_REG_FUNC, ar71xx_gpio_rr(GPIO_REG_FUNC) & ~mask);
++
++ spin_unlock_irqrestore(&ar71xx_gpio_lock, flags);
++}
++
++void __init ar71xx_gpio_init(void)
++{
++ int err;
++
++ if (!request_mem_region(AR71XX_GPIO_BASE, AR71XX_GPIO_SIZE,
++ "AR71xx GPIO controller"))
++ panic("cannot allocate AR71xx GPIO registers page");
++
++ switch (ar71xx_soc) {
++ case AR71XX_SOC_AR7130:
++ case AR71XX_SOC_AR7141:
++ case AR71XX_SOC_AR7161:
++ ar71xx_gpio_chip.ngpio = AR71XX_GPIO_COUNT;
++ break;
++
++ case AR71XX_SOC_AR9130:
++ case AR71XX_SOC_AR9132:
++ ar71xx_gpio_chip.ngpio = AR91XX_GPIO_COUNT;
++ break;
++
++ default:
++ BUG();
++ }
++
++ err = gpiochip_add(&ar71xx_gpio_chip);
++ if (err)
++ panic("cannot add AR71xx GPIO chip, error=%d", err);
++}
+diff -Nur linux-2.6.29.1.orig/arch/mips/ar71xx/irq.c linux-2.6.29.1/arch/mips/ar71xx/irq.c
+--- linux-2.6.29.1.orig/arch/mips/ar71xx/irq.c 1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.29.1/arch/mips/ar71xx/irq.c 2009-04-13 14:27:34.543070220 +0200
+@@ -0,0 +1,302 @@
++/*
++ * Atheros AR71xx SoC specific interrupt handling
++ *
++ * Copyright (C) 2008 Gabor Juhos <juhosg@openwrt.org>
++ * Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org>
++ *
++ * Parts of this file are based on Atheros' 2.6.15 BSP
++ *
++ * This program is free software; you can redistribute it and/or modify it
++ * under the terms of the GNU General Public License version 2 as published
++ * by the Free Software Foundation.
++ */
++
++#include <linux/kernel.h>
++#include <linux/init.h>
++#include <linux/interrupt.h>
++#include <linux/irq.h>
++
++#include <asm/irq_cpu.h>
++#include <asm/mipsregs.h>
++
++#include <asm/mach-ar71xx/ar71xx.h>
++
++#ifdef CONFIG_PCI
++static void ar71xx_pci_irq_dispatch(void)
++{
++ u32 pending;
++
++ pending = ar71xx_reset_rr(AR71XX_RESET_REG_PCI_INT_STATUS) &
++ ar71xx_reset_rr(AR71XX_RESET_REG_PCI_INT_ENABLE);
++
++ if (pending & PCI_INT_DEV0)
++ do_IRQ(AR71XX_PCI_IRQ_DEV0);
++
++ else if (pending & PCI_INT_DEV1)
++ do_IRQ(AR71XX_PCI_IRQ_DEV1);
++
++ else if (pending & PCI_INT_DEV2)
++ do_IRQ(AR71XX_PCI_IRQ_DEV2);
++
++ else
++ spurious_interrupt();
++}
++
++static void ar71xx_pci_irq_unmask(unsigned int irq)
++{
++ irq -= AR71XX_PCI_IRQ_BASE;
++ ar71xx_reset_wr(AR71XX_RESET_REG_PCI_INT_ENABLE,
++ ar71xx_reset_rr(AR71XX_RESET_REG_PCI_INT_ENABLE) | (1 << irq));
++}
++
++static void ar71xx_pci_irq_mask(unsigned int irq)
++{
++ irq -= AR71XX_PCI_IRQ_BASE;
++ ar71xx_reset_wr(AR71XX_RESET_REG_PCI_INT_ENABLE,
++ ar71xx_reset_rr(AR71XX_RESET_REG_PCI_INT_ENABLE) & ~(1 << irq));
++}
++
++static struct irq_chip ar71xx_pci_irq_chip = {
++ .name = "AR71XX PCI ",
++ .mask = ar71xx_pci_irq_mask,
++ .unmask = ar71xx_pci_irq_unmask,
++ .mask_ack = ar71xx_pci_irq_mask,
++};
++
++static struct irqaction ar71xx_pci_irqaction = {
++ .handler = no_action,
++ .name = "cascade [AR71XX PCI]",
++};
++
++static void __init ar71xx_pci_irq_init(void)
++{
++ int i;
++
++ ar71xx_reset_wr(AR71XX_RESET_REG_PCI_INT_ENABLE, 0);
++ ar71xx_reset_wr(AR71XX_RESET_REG_PCI_INT_STATUS, 0);
++
++ for (i = AR71XX_PCI_IRQ_BASE;
++ i < AR71XX_PCI_IRQ_BASE + AR71XX_PCI_IRQ_COUNT; i++) {
++ irq_desc[i].status = IRQ_DISABLED;
++ set_irq_chip_and_handler(i, &ar71xx_pci_irq_chip,
++ handle_level_irq);
++ }
++
++ setup_irq(AR71XX_CPU_IRQ_PCI, &ar71xx_pci_irqaction);
++}
++#endif /* CONFIG_PCI */
++
++static void ar71xx_gpio_irq_dispatch(void)
++{
++ u32 pending;
++
++ pending = ar71xx_gpio_rr(GPIO_REG_INT_PENDING)
++ & ar71xx_gpio_rr(GPIO_REG_INT_ENABLE);
++
++ if (pending)
++ do_IRQ(AR71XX_GPIO_IRQ_BASE + fls(pending) - 1);
++ else
++ spurious_interrupt();
++}
++
++static void ar71xx_gpio_irq_unmask(unsigned int irq)
++{
++ irq -= AR71XX_GPIO_IRQ_BASE;
++ ar71xx_gpio_wr(GPIO_REG_INT_ENABLE,
++ ar71xx_gpio_rr(GPIO_REG_INT_ENABLE) | (1 << irq));
++}
++
++static void ar71xx_gpio_irq_mask(unsigned int irq)
++{
++ irq -= AR71XX_GPIO_IRQ_BASE;
++ ar71xx_gpio_wr(GPIO_REG_INT_ENABLE,
++ ar71xx_gpio_rr(GPIO_REG_INT_ENABLE) & ~(1 << irq));
++}
++
++#if 0
++static int ar71xx_gpio_irq_set_type(unsigned int irq, unsigned int flow_type)
++{
++ /* TODO: implement */
++ return 0;
++}
++#else
++#define ar71xx_gpio_irq_set_type NULL
++#endif
++
++struct irq_chip ar71xx_gpio_irq_chip = {
++ .name = "AR71XX GPIO",
++ .unmask = ar71xx_gpio_irq_unmask,
++ .mask = ar71xx_gpio_irq_mask,
++ .mask_ack = ar71xx_gpio_irq_mask,
++ .set_type = ar71xx_gpio_irq_set_type,
++};
++
++static struct irqaction ar71xx_gpio_irqaction = {
++ .handler = no_action,
++ .name = "cascade [AR71XX GPIO]",
++};
++
++#define GPIO_IRQ_INIT_STATUS (IRQ_LEVEL | IRQ_TYPE_LEVEL_HIGH | IRQ_DISABLED)
++#define GPIO_INT_ALL 0xffff
++
++static void __init ar71xx_gpio_irq_init(void)
++{
++ int i;
++
++ ar71xx_gpio_wr(GPIO_REG_INT_ENABLE, 0);
++ ar71xx_gpio_wr(GPIO_REG_INT_PENDING, 0);
++
++ /* setup type of all GPIO interrupts to level sensitive */
++ ar71xx_gpio_wr(GPIO_REG_INT_TYPE, GPIO_INT_ALL);
++
++ /* setup polarity of all GPIO interrupts to active high */
++ ar71xx_gpio_wr(GPIO_REG_INT_POLARITY, GPIO_INT_ALL);
++
++ for (i = AR71XX_GPIO_IRQ_BASE;
++ i < AR71XX_GPIO_IRQ_BASE + AR71XX_GPIO_IRQ_COUNT; i++) {
++ irq_desc[i].status = GPIO_IRQ_INIT_STATUS;
++ set_irq_chip_and_handler(i, &ar71xx_gpio_irq_chip,
++ handle_level_irq);
++ }
++
++ setup_irq(AR71XX_MISC_IRQ_GPIO, &ar71xx_gpio_irqaction);
++}
++
++static void ar71xx_misc_irq_dispatch(void)
++{
++ u32 pending;
++
++ pending = ar71xx_reset_rr(AR71XX_RESET_REG_MISC_INT_STATUS)
++ & ar71xx_reset_rr(AR71XX_RESET_REG_MISC_INT_ENABLE);
++
++ if (pending & MISC_INT_UART)
++ do_IRQ(AR71XX_MISC_IRQ_UART);
++
++ else if (pending & MISC_INT_DMA)
++ do_IRQ(AR71XX_MISC_IRQ_DMA);
++
++ else if (pending & MISC_INT_PERFC)
++ do_IRQ(AR71XX_MISC_IRQ_PERFC);
++
++ else if (pending & MISC_INT_TIMER)
++ do_IRQ(AR71XX_MISC_IRQ_TIMER);
++
++ else if (pending & MISC_INT_OHCI)
++ do_IRQ(AR71XX_MISC_IRQ_OHCI);
++
++ else if (pending & MISC_INT_ERROR)
++ do_IRQ(AR71XX_MISC_IRQ_ERROR);
++
++ else if (pending & MISC_INT_GPIO)
++ ar71xx_gpio_irq_dispatch();
++
++ else if (pending & MISC_INT_WDOG)
++ do_IRQ(AR71XX_MISC_IRQ_WDOG);
++
++ else
++ spurious_interrupt();
++}
++
++static void ar71xx_misc_irq_unmask(unsigned int irq)
++{
++ irq -= AR71XX_MISC_IRQ_BASE;
++ ar71xx_reset_wr(AR71XX_RESET_REG_MISC_INT_ENABLE,
++ ar71xx_reset_rr(AR71XX_RESET_REG_MISC_INT_ENABLE) | (1 << irq));
++}
++
++static void ar71xx_misc_irq_mask(unsigned int irq)
++{
++ irq -= AR71XX_MISC_IRQ_BASE;
++ ar71xx_reset_wr(AR71XX_RESET_REG_MISC_INT_ENABLE,
++ ar71xx_reset_rr(AR71XX_RESET_REG_MISC_INT_ENABLE) & ~(1 << irq));
++}
++
++struct irq_chip ar71xx_misc_irq_chip = {
++ .name = "AR71XX MISC",
++ .unmask = ar71xx_misc_irq_unmask,
++ .mask = ar71xx_misc_irq_mask,
++ .mask_ack = ar71xx_misc_irq_mask,
++};
++
++static struct irqaction ar71xx_misc_irqaction = {
++ .handler = no_action,
++ .name = "cascade [AR71XX MISC]",
++};
++
++static void __init ar71xx_misc_irq_init(void)
++{
++ int i;
++
++ ar71xx_reset_wr(AR71XX_RESET_REG_MISC_INT_ENABLE, 0);
++ ar71xx_reset_wr(AR71XX_RESET_REG_MISC_INT_STATUS, 0);
++
++ for (i = AR71XX_MISC_IRQ_BASE;
++ i < AR71XX_MISC_IRQ_BASE + AR71XX_MISC_IRQ_COUNT; i++) {
++ irq_desc[i].status = IRQ_DISABLED;
++ set_irq_chip_and_handler(i, &ar71xx_misc_irq_chip,
++ handle_level_irq);
++ }
++
++ setup_irq(AR71XX_CPU_IRQ_MISC, &ar71xx_misc_irqaction);
++}
++
++static void ar913x_wmac_irq_dispatch(void)
++{
++ do_IRQ(AR71XX_CPU_IRQ_WMAC);
++}
++
++static void (* ar71xx_ip2_irq_handler)(void) = spurious_interrupt;
++
++asmlinkage void plat_irq_dispatch(void)
++{
++ unsigned long pending;
++
++ pending = read_c0_status() & read_c0_cause() & ST0_IM;
++
++ if (pending & STATUSF_IP7)
++ do_IRQ(AR71XX_CPU_IRQ_TIMER);
++
++ else if (pending & STATUSF_IP2)
++ ar71xx_ip2_irq_handler();
++
++ else if (pending & STATUSF_IP4)
++ do_IRQ(AR71XX_CPU_IRQ_GE0);
++
++ else if (pending & STATUSF_IP5)
++ do_IRQ(AR71XX_CPU_IRQ_GE1);
++
++ else if (pending & STATUSF_IP3)
++ do_IRQ(AR71XX_CPU_IRQ_USB);
++
++ else if (pending & STATUSF_IP6)
++ ar71xx_misc_irq_dispatch();
++
++ else
++ spurious_interrupt();
++}
++
++void __init arch_init_irq(void)
++{
++ mips_cpu_irq_init();
++
++ ar71xx_misc_irq_init();
++
++ switch (ar71xx_soc) {
++ case AR71XX_SOC_AR7130:
++ case AR71XX_SOC_AR7141:
++ case AR71XX_SOC_AR7161:
++#ifdef CONFIG_PCI
++ ar71xx_pci_irq_init();
++ ar71xx_ip2_irq_handler = ar71xx_pci_irq_dispatch;
++#endif
++ break;
++ case AR71XX_SOC_AR9130:
++ case AR71XX_SOC_AR9132:
++ ar71xx_ip2_irq_handler = ar913x_wmac_irq_dispatch;
++ break;
++ default:
++ BUG();
++ }
++
++ ar71xx_gpio_irq_init();
++}
+diff -Nur linux-2.6.29.1.orig/arch/mips/ar71xx/mach-ap81.c linux-2.6.29.1/arch/mips/ar71xx/mach-ap81.c
+--- linux-2.6.29.1.orig/arch/mips/ar71xx/mach-ap81.c 1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.29.1/arch/mips/ar71xx/mach-ap81.c 2009-04-13 14:27:34.543070220 +0200
+@@ -0,0 +1,148 @@
++/*
++ * Atheros AP81 board support
++ *
++ * Copyright (C) 2009 Gabor Juhos <juhosg@openwrt.org>
++ * Copyright (C) 2009 Imre Kaloz <kaloz@openwrt.org>
++ *
++ * This program is free software; you can redistribute it and/or modify it
++ * under the terms of the GNU General Public License version 2 as published
++ * by the Free Software Foundation.
++ */
++
++#include <linux/platform_device.h>
++#include <linux/mtd/mtd.h>
++#include <linux/mtd/partitions.h>
++#include <linux/spi/spi.h>
++#include <linux/spi/flash.h>
++#include <linux/input.h>
++
++#include <asm/mips_machine.h>
++#include <asm/mach-ar71xx/ar71xx.h>
++
++#include "devices.h"
++
++#define AP81_GPIO_LED_STATUS 1
++#define AP81_GPIO_LED_AOSS 3
++#define AP81_GPIO_LED_WLAN 6
++#define AP81_GPIO_LED_POWER 14
++
++#define AP81_GPIO_BTN_SW4 12
++#define AP81_GPIO_BTN_SW1 21
++
++#define AP81_BUTTONS_POLL_INTERVAL 20
++
++#ifdef CONFIG_MTD_PARTITIONS
++static struct mtd_partition ap81_partitions[] = {
++ {
++ .name = "u-boot",
++ .offset = 0,
++ .size = 0x040000,
++ .mask_flags = MTD_WRITEABLE,
++ } , {
++ .name = "u-boot-env",
++ .offset = 0x040000,
++ .size = 0x010000,
++ } , {
++ .name = "rootfs",
++ .offset = 0x050000,
++ .size = 0x500000,
++ } , {
++ .name = "uImage",
++ .offset = 0x550000,
++ .size = 0x100000,
++ } , {
++ .name = "ART",
++ .offset = 0x650000,
++ .size = 0x1b0000,
++ .mask_flags = MTD_WRITEABLE,
++ }
++};
++#endif /* CONFIG_MTD_PARTITIONS */
++
++static struct flash_platform_data ap81_flash_data = {
++#ifdef CONFIG_MTD_PARTITIONS
++ .parts = ap81_partitions,
++ .nr_parts = ARRAY_SIZE(ap81_partitions),
++#endif
++};
++
++static struct spi_board_info ap81_spi_info[] = {
++ {
++ .bus_num = 0,
++ .chip_select = 0,
++ .max_speed_hz = 25000000,
++ .modalias = "m25p80",
++ .platform_data = &ap81_flash_data,
++ }
++};
++
++static struct gpio_led ap81_leds_gpio[] __initdata = {
++ {
++ .name = "ap81:green:status",
++ .gpio = AP81_GPIO_LED_STATUS,
++ .active_low = 1,
++ }, {
++ .name = "ap81:amber:aoss",
++ .gpio = AP81_GPIO_LED_AOSS,
++ .active_low = 1,
++ }, {
++ .name = "ap81:green:wlan",
++ .gpio = AP81_GPIO_LED_WLAN,
++ .active_low = 1,
++ }, {
++ .name = "ap81:green:power",
++ .gpio = AP81_GPIO_LED_POWER,
++ .active_low = 1,
++ }
++};
++
++static struct gpio_button ap81_gpio_buttons[] __initdata = {
++ {
++ .desc = "sw1",
++ .type = EV_KEY,
++ .code = BTN_0,
++ .threshold = 5,
++ .gpio = AP81_GPIO_BTN_SW1,
++ .active_low = 1,
++ } , {
++ .desc = "sw4",
++ .type = EV_KEY,
++ .code = BTN_1,
++ .threshold = 5,
++ .gpio = AP81_GPIO_BTN_SW4,
++ .active_low = 1,
++ }
++};
++
++static void __init ap81_setup(void)
++{
++ ar71xx_add_device_mdio(0x0);
++
++ ar71xx_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RMII;
++ ar71xx_eth0_data.phy_mask = 0xf;
++ ar71xx_eth0_data.speed = SPEED_100;
++ ar71xx_eth0_data.duplex = DUPLEX_FULL;
++ ar71xx_eth0_data.has_ar8216 = 1;
++
++ ar71xx_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_RMII;
++ ar71xx_eth1_data.phy_mask = 0x10;
++
++ ar71xx_add_device_eth(0);
++ ar71xx_add_device_eth(1);
++
++ ar71xx_add_device_usb();
++
++ ar71xx_add_device_spi(NULL, ap81_spi_info,
++ ARRAY_SIZE(ap81_spi_info));
++
++ ar71xx_add_device_leds_gpio(-1, ARRAY_SIZE(ap81_leds_gpio),
++ ap81_leds_gpio);
++
++ ar71xx_add_device_gpio_buttons(-1, AP81_BUTTONS_POLL_INTERVAL,
++ ARRAY_SIZE(ap81_gpio_buttons),
++ ap81_gpio_buttons);
++
++ ar91xx_add_device_wmac();
++}
++
++MIPS_MACHINE(AR71XX_MACH_AP81, "Atheros AP81", ap81_setup);
+diff -Nur linux-2.6.29.1.orig/arch/mips/ar71xx/mach-ap83.c linux-2.6.29.1/arch/mips/ar71xx/mach-ap83.c
+--- linux-2.6.29.1.orig/arch/mips/ar71xx/mach-ap83.c 1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.29.1/arch/mips/ar71xx/mach-ap83.c 2009-04-13 14:27:34.547067937 +0200
+@@ -0,0 +1,87 @@
++/*
++ * Atheros AP83 board support
++ *
++ * Copyright (C) 2008-2009 Gabor Juhos <juhosg@openwrt.org>
++ * Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org>
++ *
++ * This program is free software; you can redistribute it and/or modify it
++ * under the terms of the GNU General Public License version 2 as published
++ * by the Free Software Foundation.
++ */
++
++#include <linux/platform_device.h>
++#include <linux/input.h>
++
++#include <asm/mips_machine.h>
++#include <asm/mach-ar71xx/ar71xx.h>
++
++#include "devices.h"
++
++#define AP83_GPIO_LED_WLAN 6
++#define AP83_GPIO_LED_POWER 14
++#define AP83_GPIO_LED_JUMPSTART 15
++#define AP83_GPIO_BTN_JUMPSTART 12
++#define AP83_GPIO_BTN_RESET 21
++
++static struct gpio_led ap83_leds_gpio[] __initdata = {
++ {
++ .name = "ap83:green:jumpstart",
++ .gpio = AP83_GPIO_LED_JUMPSTART,
++ .active_low = 0,
++ }, {
++ .name = "ap83:green:power",
++ .gpio = AP83_GPIO_LED_POWER,
++ .active_low = 0,
++ }, {
++ .name = "ap83:green:wlan",
++ .gpio = AP83_GPIO_LED_WLAN,
++ .active_low = 0,
++ },
++};
++
++static struct gpio_button ap83_gpio_buttons[] __initdata = {
++ {
++ .desc = "soft_reset",
++ .type = EV_KEY,
++ .code = BTN_0,
++ .threshold = 5,
++ .gpio = AP83_GPIO_BTN_RESET,
++ .active_low = 1,
++ } , {
++ .desc = "jumpstart",
++ .type = EV_KEY,
++ .code = BTN_1,
++ .threshold = 5,
++ .gpio = AP83_GPIO_BTN_JUMPSTART,
++ .active_low = 1,
++ }
++};
++
++static void __init ap83_setup(void)
++{
++ ar71xx_add_device_mdio(0xfffffffe);
++
++ ar71xx_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII;
++ ar71xx_eth0_data.phy_mask = 0x1;
++
++ ar71xx_add_device_eth(0);
++
++ ar71xx_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII;
++ ar71xx_eth1_data.phy_mask = 0x0;
++ ar71xx_eth1_data.speed = SPEED_1000;
++ ar71xx_eth1_data.duplex = DUPLEX_FULL;
++
++ ar71xx_add_device_eth(1);
++
++ ar71xx_add_device_leds_gpio(-1, ARRAY_SIZE(ap83_leds_gpio),
++ ap83_leds_gpio);
++
++ ar71xx_add_device_gpio_buttons(-1, 20, ARRAY_SIZE(ap83_gpio_buttons),
++ ap83_gpio_buttons);
++
++ ar71xx_add_device_usb();
++
++ ar91xx_add_device_wmac();
++}
++
++MIPS_MACHINE(AR71XX_MACH_AP83, "Atheros AP83", ap83_setup);
+diff -Nur linux-2.6.29.1.orig/arch/mips/ar71xx/mach-aw-nr580.c linux-2.6.29.1/arch/mips/ar71xx/mach-aw-nr580.c
+--- linux-2.6.29.1.orig/arch/mips/ar71xx/mach-aw-nr580.c 1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.29.1/arch/mips/ar71xx/mach-aw-nr580.c 2009-04-13 14:27:34.547067937 +0200
+@@ -0,0 +1,119 @@
++/*
++ * AzureWave AW-NR580 board support
++ *
++ * Copyright (C) 2008-2009 Gabor Juhos <juhosg@openwrt.org>
++ * Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org>
++ *
++ * This program is free software; you can redistribute it and/or modify it
++ * under the terms of the GNU General Public License version 2 as published
++ * by the Free Software Foundation.
++ */
++
++#include <linux/platform_device.h>
++#include <linux/mtd/mtd.h>
++#include <linux/mtd/partitions.h>
++#include <linux/spi/spi.h>
++#include <linux/spi/flash.h>
++#include <linux/input.h>
++
++#include <asm/mips_machine.h>
++#include <asm/mach-ar71xx/ar71xx.h>
++#include <asm/mach-ar71xx/pci.h>
++
++#include "devices.h"
++
++#define AW_NR580_GPIO_LED_READY_RED 0
++#define AW_NR580_GPIO_LED_WLAN 1
++#define AW_NR580_GPIO_LED_READY_GREEN 2
++#define AW_NR580_GPIO_LED_WPS_GREEN 4
++#define AW_NR580_GPIO_LED_WPS_AMBER 5
++
++#define AW_NR580_GPIO_BTN_WPS 3
++#define AW_NR580_GPIO_BTN_RESET 11
++
++#define AW_NR580_BUTTONS_POLL_INTERVAL 20
++
++static struct spi_board_info aw_nr580_spi_info[] = {
++ {
++ .bus_num = 0,
++ .chip_select = 0,
++ .max_speed_hz = 25000000,
++ .modalias = "m25p80",
++ }
++};
++
++static struct gpio_led aw_nr580_leds_gpio[] __initdata = {
++ {
++ .name = "aw-nr580:red:ready",
++ .gpio = AW_NR580_GPIO_LED_READY_RED,
++ .active_low = 0,
++ }, {
++ .name = "aw-nr580:green:ready",
++ .gpio = AW_NR580_GPIO_LED_READY_GREEN,
++ .active_low = 0,
++ }, {
++ .name = "aw-nr580:green:wps",
++ .gpio = AW_NR580_GPIO_LED_WPS_GREEN,
++ .active_low = 0,
++ }, {
++ .name = "aw-nr580:amber:wps",
++ .gpio = AW_NR580_GPIO_LED_WPS_AMBER,
++ .active_low = 0,
++ }, {
++ .name = "aw-nr580:green:wlan",
++ .gpio = AW_NR580_GPIO_LED_WLAN,
++ .active_low = 0,
++ }
++};
++
++static struct gpio_button aw_nr580_gpio_buttons[] __initdata = {
++ {
++ .desc = "reset",
++ .type = EV_KEY,
++ .code = BTN_0,
++ .threshold = 5,
++ .gpio = AW_NR580_GPIO_BTN_RESET,
++ .active_low = 1,
++ }, {
++ .desc = "wps",
++ .type = EV_KEY,
++ .code = BTN_1,
++ .threshold = 5,
++ .gpio = AW_NR580_GPIO_BTN_WPS,
++ .active_low = 1,
++ }
++};
++
++static struct ar71xx_pci_irq aw_nr580_pci_irqs[] __initdata = {
++ {
++ .slot = 1,
++ .pin = 1,
++ .irq = AR71XX_PCI_IRQ_DEV1,
++ }
++};
++
++static void __init aw_nr580_setup(void)
++{
++ ar71xx_add_device_mdio(0x0);
++
++ ar71xx_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_MII;
++ ar71xx_eth0_data.phy_mask = 0xf;
++ ar71xx_eth0_data.speed = SPEED_100;
++ ar71xx_eth0_data.duplex = DUPLEX_FULL;
++
++ ar71xx_add_device_eth(0);
++
++ ar71xx_pci_init(ARRAY_SIZE(aw_nr580_pci_irqs), aw_nr580_pci_irqs);
++
++ ar71xx_add_device_spi(NULL, aw_nr580_spi_info,
++ ARRAY_SIZE(aw_nr580_spi_info));
++
++ ar71xx_add_device_leds_gpio(-1, ARRAY_SIZE(aw_nr580_leds_gpio),
++ aw_nr580_leds_gpio);
++
++ ar71xx_add_device_gpio_buttons(-1, AW_NR580_BUTTONS_POLL_INTERVAL,
++ ARRAY_SIZE(aw_nr580_gpio_buttons),
++ aw_nr580_gpio_buttons);
++}
++
++MIPS_MACHINE(AR71XX_MACH_AW_NR580, "AzureWave AW-NR580", aw_nr580_setup);
+diff -Nur linux-2.6.29.1.orig/arch/mips/ar71xx/mach-generic.c linux-2.6.29.1/arch/mips/ar71xx/mach-generic.c
+--- linux-2.6.29.1.orig/arch/mips/ar71xx/mach-generic.c 1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.29.1/arch/mips/ar71xx/mach-generic.c 2009-04-13 14:27:34.547067937 +0200
+@@ -0,0 +1,22 @@
++/*
++ * Generic AR71xx machine support
++ *
++ * Copyright (C) 2008 Gabor Juhos <juhosg@openwrt.org>
++ * Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org>
++ *
++ * This program is free software; you can redistribute it and/or modify it
++ * under the terms of the GNU General Public License version 2 as published
++ * by the Free Software Foundation.
++ */
++
++#include <linux/init.h>
++
++#include <asm/mips_machine.h>
++#include <asm/mach-ar71xx/ar71xx.h>
++
++static void __init ar71xx_generic_init(void)
++{
++ /* Nothing to do */
++}
++
++MIPS_MACHINE(AR71XX_MACH_GENERIC, "Generic AR71xx board", ar71xx_generic_init);
+diff -Nur linux-2.6.29.1.orig/arch/mips/ar71xx/mach-mzk-w04nu.c linux-2.6.29.1/arch/mips/ar71xx/mach-mzk-w04nu.c
+--- linux-2.6.29.1.orig/arch/mips/ar71xx/mach-mzk-w04nu.c 1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.29.1/arch/mips/ar71xx/mach-mzk-w04nu.c 2009-04-13 14:27:34.551067888 +0200
+@@ -0,0 +1,173 @@
++/*
++ * Planex MZK-W04NU board support
++ *
++ * Copyright (C) 2009 Gabor Juhos <juhosg@openwrt.org>
++ *
++ * This program is free software; you can redistribute it and/or modify it
++ * under the terms of the GNU General Public License version 2 as published
++ * by the Free Software Foundation.
++ */
++
++#include <linux/platform_device.h>
++#include <linux/mtd/mtd.h>
++#include <linux/mtd/partitions.h>
++#include <linux/spi/spi.h>
++#include <linux/spi/flash.h>
++#include <linux/input.h>
++
++#include <asm/mips_machine.h>
++
++#include <asm/mach-ar71xx/ar71xx.h>
++
++#include "devices.h"
++
++#define MZK_W04NU_GPIO_LED_USB 0
++#define MZK_W04NU_GPIO_LED_STATUS 1
++#define MZK_W04NU_GPIO_LED_WPS 3
++#define MZK_W04NU_GPIO_LED_WLAN 6
++#define MZK_W04NU_GPIO_LED_AP 15
++#define MZK_W04NU_GPIO_LED_ROUTER 16
++
++#define MZK_W04NU_GPIO_BTN_APROUTER 5
++#define MZK_W04NU_GPIO_BTN_WPS 12
++#define MZK_W04NU_GPIO_BTN_RESET 21
++
++#define MZK_W04NU_BUTTONS_POLL_INTERVAL 20
++
++#ifdef CONFIG_MTD_PARTITIONS
++static struct mtd_partition mzk_w04nu_partitions[] = {
++ {
++ .name = "u-boot",
++ .offset = 0,
++ .size = 0x040000,
++ .mask_flags = MTD_WRITEABLE,
++ } , {
++ .name = "u-boot-env",
++ .offset = 0x040000,
++ .size = 0x010000,
++ } , {
++ .name = "kernel",
++ .offset = 0x050000,
++ .size = 0x160000,
++ } , {
++ .name = "rootfs",
++ .offset = 0x1b0000,
++ .size = 0x630000,
++ } , {
++ .name = "art",
++ .offset = 0x7e0000,
++ .size = 0x020000,
++ .mask_flags = MTD_WRITEABLE,
++ } , {
++ .name = "firmware",
++ .offset = 0x050000,
++ .size = 0x770000,
++ }
++};
++#endif /* CONFIG_MTD_PARTITIONS */
++
++static struct flash_platform_data mzk_w04nu_flash_data = {
++#ifdef CONFIG_MTD_PARTITIONS
++ .parts = mzk_w04nu_partitions,
++ .nr_parts = ARRAY_SIZE(mzk_w04nu_partitions),
++#endif
++};
++
++static struct spi_board_info mzk_w04nu_spi_info[] = {
++ {
++ .bus_num = 0,
++ .chip_select = 0,
++ .max_speed_hz = 25000000,
++ .modalias = "m25p80",
++ .platform_data = &mzk_w04nu_flash_data,
++ }
++};
++
++static struct gpio_led mzk_w04nu_leds_gpio[] __initdata = {
++ {
++ .name = "mzk-w04nu:green:status",
++ .gpio = MZK_W04NU_GPIO_LED_STATUS,
++ .active_low = 1,
++ }, {
++ .name = "mzk-w04nu:blue:wps",
++ .gpio = MZK_W04NU_GPIO_LED_WPS,
++ .active_low = 1,
++ }, {
++ .name = "mzk-w04nu:green:wlan",
++ .gpio = MZK_W04NU_GPIO_LED_WLAN,
++ .active_low = 1,
++ }, {
++ .name = "mzk-w04nu:green:usb",
++ .gpio = MZK_W04NU_GPIO_LED_USB,
++ .active_low = 1,
++ }, {
++ .name = "mzk-w04nu:green:ap",
++ .gpio = MZK_W04NU_GPIO_LED_AP,
++ .active_low = 1,
++ }, {
++ .name = "mzk-w04nu:green:router",
++ .gpio = MZK_W04NU_GPIO_LED_ROUTER,
++ .active_low = 1,
++ }
++};
++
++static struct gpio_button mzk_w04nu_gpio_buttons[] __initdata = {
++ {
++ .desc = "reset",
++ .type = EV_KEY,
++ .code = BTN_0,
++ .threshold = 5,
++ .gpio = MZK_W04NU_GPIO_BTN_RESET,
++ .active_low = 1,
++ }, {
++ .desc = "wps",
++ .type = EV_KEY,
++ .code = BTN_1,
++ .threshold = 5,
++ .gpio = MZK_W04NU_GPIO_BTN_WPS,
++ .active_low = 1,
++ }, {
++ .desc = "aprouter",
++ .type = EV_KEY,
++ .code = BTN_2,
++ .threshold = 5,
++ .gpio = MZK_W04NU_GPIO_BTN_APROUTER,
++ .active_low = 0,
++ }
++};
++
++static void __init mzk_w04nu_setup(void)
++{
++ u8 *mac = (u8 *) KSEG1ADDR(0x1fff1000);
++
++ ar71xx_set_mac_base(mac);
++
++ ar71xx_add_device_mdio(0x0);
++
++ ar71xx_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RMII;
++ ar71xx_eth0_data.phy_mask = 0xf;
++ ar71xx_eth0_data.speed = SPEED_100;
++ ar71xx_eth0_data.duplex = DUPLEX_FULL;
++ ar71xx_eth0_data.has_ar8216 = 1;
++
++ ar71xx_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_RMII;
++ ar71xx_eth1_data.phy_mask = 0x10;
++
++ ar71xx_add_device_eth(0);
++ ar71xx_add_device_eth(1);
++
++ ar71xx_add_device_spi(NULL, mzk_w04nu_spi_info,
++ ARRAY_SIZE(mzk_w04nu_spi_info));
++
++ ar71xx_add_device_leds_gpio(-1, ARRAY_SIZE(mzk_w04nu_leds_gpio),
++ mzk_w04nu_leds_gpio);
++
++ ar71xx_add_device_gpio_buttons(-1, MZK_W04NU_BUTTONS_POLL_INTERVAL,
++ ARRAY_SIZE(mzk_w04nu_gpio_buttons),
++ mzk_w04nu_gpio_buttons);
++ ar71xx_add_device_usb();
++
++ ar91xx_add_device_wmac();
++}
++
++MIPS_MACHINE(AR71XX_MACH_MZK_W04NU, "Planex MZK-W04NU", mzk_w04nu_setup);
+diff -Nur linux-2.6.29.1.orig/arch/mips/ar71xx/mach-mzk-w300nh.c linux-2.6.29.1/arch/mips/ar71xx/mach-mzk-w300nh.c
+--- linux-2.6.29.1.orig/arch/mips/ar71xx/mach-mzk-w300nh.c 1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.29.1/arch/mips/ar71xx/mach-mzk-w300nh.c 2009-04-13 14:27:34.551067888 +0200
+@@ -0,0 +1,81 @@
++/*
++ * Planex MZK-W300NH board support
++ *
++ * Copyright (C) 2008-2009 Gabor Juhos <juhosg@openwrt.org>
++ * Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org>
++ *
++ * This program is free software; you can redistribute it and/or modify it
++ * under the terms of the GNU General Public License version 2 as published
++ * by the Free Software Foundation.
++ */
++
++#include <linux/platform_device.h>
++#include <linux/mtd/mtd.h>
++#include <linux/mtd/partitions.h>
++#include <linux/spi/spi.h>
++#include <linux/spi/flash.h>
++
++#include <asm/mips_machine.h>
++
++#include <asm/mach-ar71xx/ar71xx.h>
++
++#include "devices.h"
++
++#ifdef CONFIG_MTD_PARTITIONS
++static struct mtd_partition mzk_w300nh_partitions[] = {
++ {
++ .name = "u-boot",
++ .offset = 0,
++ .size = 0x040000,
++ .mask_flags = MTD_WRITEABLE,
++ } , {
++ .name = "u-boot-env",
++ .offset = 0x040000,
++ .size = 0x010000,
++ } , {
++ .name = "uImage",
++ .offset = 0x050000,
++ .size = 0x160000,
++ } , {
++ .name = "rootfs",
++ .offset = 0x1b0000,
++ .size = 0x610000,
++ } , {
++ .name = "config",
++ .offset = 0x7c0000,
++ .size = 0x020000,
++ } , {
++ .name = "art",
++ .offset = 0x7e0000,
++ .size = 0x020000,
++ .mask_flags = MTD_WRITEABLE,
++ }
++};
++#endif /* CONFIG_MTD_PARTITIONS */
++
++static struct flash_platform_data mzk_w300nh_flash_data = {
++#ifdef CONFIG_MTD_PARTITIONS
++ .parts = mzk_w300nh_partitions,
++ .nr_parts = ARRAY_SIZE(mzk_w300nh_partitions),
++#endif
++};
++
++static struct spi_board_info mzk_w300nh_spi_info[] = {
++ {
++ .bus_num = 0,
++ .chip_select = 0,
++ .max_speed_hz = 25000000,
++ .modalias = "m25p80",
++ .platform_data = &mzk_w300nh_flash_data,
++ }
++};
++
++static void __init mzk_w300nh_setup(void)
++{
++ ar71xx_add_device_spi(NULL, mzk_w300nh_spi_info,
++ ARRAY_SIZE(mzk_w300nh_spi_info));
++
++ ar91xx_add_device_wmac();
++}
++
++MIPS_MACHINE(AR71XX_MACH_MZK_W300NH, "Planex MZK-W300NH", mzk_w300nh_setup);
+diff -Nur linux-2.6.29.1.orig/arch/mips/ar71xx/mach-pb42.c linux-2.6.29.1/arch/mips/ar71xx/mach-pb42.c
+--- linux-2.6.29.1.orig/arch/mips/ar71xx/mach-pb42.c 1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.29.1/arch/mips/ar71xx/mach-pb42.c 2009-04-13 14:27:34.555068677 +0200
+@@ -0,0 +1,102 @@
++/*
++ * Atheros PB42 board support
++ *
++ * Copyright (C) 2008-2009 Gabor Juhos <juhosg@openwrt.org>
++ * Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org>
++ *
++ * This program is free software; you can redistribute it and/or modify it
++ * under the terms of the GNU General Public License version 2 as published
++ * by the Free Software Foundation.
++ */
++
++#include <linux/init.h>
++#include <linux/bitops.h>
++#include <linux/input.h>
++#include <linux/platform_device.h>
++#include <linux/spi/spi.h>
++#include <linux/spi/flash.h>
++
++#include <asm/mips_machine.h>
++#include <asm/mach-ar71xx/ar71xx.h>
++#include <asm/mach-ar71xx/pci.h>
++
++#include "devices.h"
++
++#define PB42_BUTTONS_POLL_INTERVAL 20
++
++#define PB42_GPIO_BTN_SW4 8
++#define PB42_GPIO_BTN_SW5 3
++
++static struct spi_board_info pb42_spi_info[] = {
++ {
++ .bus_num = 0,
++ .chip_select = 0,
++ .max_speed_hz = 25000000,
++ .modalias = "m25p80",
++ }
++};
++
++static struct ar71xx_pci_irq pb42_pci_irqs[] __initdata = {
++ {
++ .slot = 0,
++ .pin = 1,
++ .irq = AR71XX_PCI_IRQ_DEV0,
++ }, {
++ .slot = 1,
++ .pin = 1,
++ .irq = AR71XX_PCI_IRQ_DEV1,
++ }, {
++ .slot = 2,
++ .pin = 1,
++ .irq = AR71XX_PCI_IRQ_DEV2,
++ }
++};
++
++static struct gpio_button pb42_gpio_buttons[] __initdata = {
++ {
++ .desc = "sw4",
++ .type = EV_KEY,
++ .code = BTN_0,
++ .threshold = 5,
++ .gpio = PB42_GPIO_BTN_SW4,
++ .active_low = 1,
++ } , {
++ .desc = "sw5",
++ .type = EV_KEY,
++ .code = BTN_1,
++ .threshold = 5,
++ .gpio = PB42_GPIO_BTN_SW5,
++ .active_low = 1,
++ }
++};
++
++#define PB42_WAN_PHYMASK BIT(20)
++#define PB42_LAN_PHYMASK (BIT(16) | BIT(17) | BIT(18) | BIT(19))
++#define PB42_MDIO_PHYMASK (PB42_LAN_PHYMASK | PB42_WAN_PHYMASK)
++
++static void __init pb42_init(void)
++{
++ ar71xx_add_device_spi(NULL, pb42_spi_info,
++ ARRAY_SIZE(pb42_spi_info));
++
++ ar71xx_add_device_mdio(~PB42_MDIO_PHYMASK);
++
++ ar71xx_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_MII;
++ ar71xx_eth0_data.phy_mask = PB42_WAN_PHYMASK;
++
++ ar71xx_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_RMII;
++ ar71xx_eth1_data.phy_mask = PB42_LAN_PHYMASK;
++ ar71xx_eth1_data.speed = SPEED_100;
++ ar71xx_eth1_data.duplex = DUPLEX_FULL;
++
++ ar71xx_add_device_eth(0);
++ ar71xx_add_device_eth(1);
++
++ ar71xx_add_device_gpio_buttons(-1, PB42_BUTTONS_POLL_INTERVAL,
++ ARRAY_SIZE(pb42_gpio_buttons),
++ pb42_gpio_buttons);
++
++ ar71xx_pci_init(ARRAY_SIZE(pb42_pci_irqs), pb42_pci_irqs);
++}
++
++MIPS_MACHINE(AR71XX_MACH_PB42, "Atheros PB42", pb42_init);
+diff -Nur linux-2.6.29.1.orig/arch/mips/ar71xx/mach-rb-4xx.c linux-2.6.29.1/arch/mips/ar71xx/mach-rb-4xx.c
+--- linux-2.6.29.1.orig/arch/mips/ar71xx/mach-rb-4xx.c 1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.29.1/arch/mips/ar71xx/mach-rb-4xx.c 2009-04-13 14:27:34.555068677 +0200
+@@ -0,0 +1,251 @@
++/*
++ * MikroTik RouterBOARD 4xx series support
++ *
++ * Copyright (C) 2008 Gabor Juhos <juhosg@openwrt.org>
++ * Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org>
++ *
++ * This program is free software; you can redistribute it and/or modify it
++ * under the terms of the GNU General Public License version 2 as published
++ * by the Free Software Foundation.
++ */
++
++#include <linux/platform_device.h>
++#include <linux/irq.h>
++#include <linux/mmc/host.h>
++#include <linux/spi/spi.h>
++#include <linux/spi/flash.h>
++#include <linux/spi/mmc_spi.h>
++#include <linux/input.h>
++
++#include <asm/mips_machine.h>
++#include <asm/mach-ar71xx/ar71xx.h>
++#include <asm/mach-ar71xx/pci.h>
++
++#include "devices.h"
++
++#define RB4XX_GPIO_USER_LED 4
++#define RB4XX_GPIO_RESET_SWITCH 7
++
++#define RB4XX_BUTTONS_POLL_INTERVAL 20
++
++static struct gpio_led rb4xx_leds_gpio[] __initdata = {
++ {
++ .name = "rb4xx:yellow:user",
++ .gpio = RB4XX_GPIO_USER_LED,
++ .active_low = 0,
++ },
++};
++
++static struct gpio_button rb4xx_gpio_buttons[] __initdata = {
++ {
++ .desc = "reset_switch",
++ .type = EV_KEY,
++ .code = BTN_0,
++ .threshold = 5,
++ .gpio = RB4XX_GPIO_RESET_SWITCH,
++ .active_low = 1,
++ }
++};
++
++static struct platform_device rb4xx_nand_device = {
++ .name = "rb4xx-nand",
++ .id = -1,
++};
++
++static struct ar71xx_pci_irq rb4xx_pci_irqs[] __initdata = {
++ {
++ .slot = 1,
++ .pin = 1,
++ .irq = AR71XX_PCI_IRQ_DEV0,
++ }, {
++ .slot = 1,
++ .pin = 2,
++ .irq = AR71XX_PCI_IRQ_DEV1,
++ }, {
++ .slot = 2,
++ .pin = 1,
++ .irq = AR71XX_PCI_IRQ_DEV1,
++ }, {
++ .slot = 3,
++ .pin = 1,
++ .irq = AR71XX_PCI_IRQ_DEV2,
++ }
++};
++
++#if 0
++/*
++ * SPI device support is experimental
++ */
++static struct flash_platform_data rb4xx_flash_data = {
++ .type = "pm25lv512",
++};
++
++static struct spi_board_info rb4xx_spi_info[] = {
++ {
++ .bus_num = 0,
++ .chip_select = 0,
++ .max_speed_hz = 25000000,
++ .modalias = "m25p80",
++ .platform_data = &rb4xx_flash_data,
++ }
++};
++
++static struct mmc_spi_platform_data rb433_mmc_data = {
++ .ocr_mask = MMC_VDD_32_33 | MMC_VDD_33_34,
++};
++
++static struct spi_board_info rb433_spi_info[] = {
++ {
++ .bus_num = 0,
++ .chip_select = 0,
++ .max_speed_hz = 25000000,
++ .modalias = "m25p80",
++ .platform_data = &rb433_flash_data,
++ }, {
++ .bus_num = 0,
++ .chip_select = 2,
++ .max_speed_hz = 25000000,
++ .modalias = "mmc_spi",
++ .platform_data = &rb433_mmc_data,
++ }
++};
++
++static u32 rb433_spi_get_ioc_base(u8 chip_select, int cs_high, int is_on)
++{
++ u32 ret;
++
++ if (is_on == AR71XX_SPI_CS_INACTIVE) {
++ ret = SPI_IOC_CS0 | SPI_IOC_CS1;
++ } else {
++ if (cs_high) {
++ ret = SPI_IOC_CS0 | SPI_IOC_CS1;
++ } else {
++ if ((chip_select ^ 2) == 0)
++ ret = SPI_IOC_CS1 ^ (SPI_IOC_CS0 | SPI_IOC_CS1);
++ else
++ ret = SPI_IOC_CS0 ^ (SPI_IOC_CS0 | SPI_IOC_CS1);
++ }
++ }
++
++ return ret;
++}
++
++struct ar71xx_spi_platform_data rb433_spi_data = {
++ .bus_num = 0,
++ .num_chipselect = 3,
++ .get_ioc_base = rb433_spi_get_ioc_base,
++};
++
++static void rb4xx_add_device_spi(void)
++{
++ ar71xx_add_device_spi(NULL, rb4xx_spi_info, ARRAY_SIZE(rb4xx_spi_info));
++}
++
++static void rb433_add_device_spi(void)
++{
++ ar71xx_add_device_spi(&rb433_spi_data, rb433_spi_info,
++ ARRAY_SIZE(rb433_spi_info));
++}
++#else
++static inline void rb4xx_add_device_spi(void) {}
++static inline void rb433_add_device_spi(void) {}
++#endif
++
++static void __init rb4xx_generic_setup(void)
++{
++ ar71xx_gpio_function_enable(GPIO_FUNC_SPI_CS1_EN |
++ GPIO_FUNC_SPI_CS2_EN);
++
++ ar71xx_add_device_leds_gpio(-1, ARRAY_SIZE(rb4xx_leds_gpio),
++ rb4xx_leds_gpio);
++
++ ar71xx_add_device_gpio_buttons(-1, RB4XX_BUTTONS_POLL_INTERVAL,
++ ARRAY_SIZE(rb4xx_gpio_buttons),
++ rb4xx_gpio_buttons);
++
++ platform_device_register(&rb4xx_nand_device);
++}
++
++static void __init rb411_setup(void)
++{
++ rb4xx_generic_setup();
++ rb4xx_add_device_spi();
++
++ ar71xx_add_device_mdio(0xfffffffe);
++
++ ar71xx_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_MII;
++ ar71xx_eth0_data.phy_mask = 0x00000001;
++
++ ar71xx_add_device_eth(0);
++
++ ar71xx_pci_init(ARRAY_SIZE(rb4xx_pci_irqs), rb4xx_pci_irqs);
++}
++
++MIPS_MACHINE(AR71XX_MACH_RB_411, "MikroTik RouterBOARD 411/A/AH", rb411_setup);
++
++static void __init rb433_setup(void)
++{
++ rb4xx_generic_setup();
++ rb433_add_device_spi();
++
++ ar71xx_add_device_mdio(0xffffffe9);
++
++ ar71xx_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_MII;
++ ar71xx_eth0_data.phy_mask = 0x00000006;
++ ar71xx_eth0_data.speed = SPEED_100;
++ ar71xx_eth0_data.duplex = DUPLEX_FULL;
++
++ ar71xx_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_RMII;
++ ar71xx_eth1_data.phy_mask = 0x00000010;
++
++ ar71xx_add_device_eth(1);
++ ar71xx_add_device_eth(0);
++
++ ar71xx_pci_init(ARRAY_SIZE(rb4xx_pci_irqs), rb4xx_pci_irqs);
++}
++
++MIPS_MACHINE(AR71XX_MACH_RB_433, "MikroTik RouterBOARD 433/AH", rb433_setup);
++
++static void __init rb450_setup(void)
++{
++ rb4xx_generic_setup();
++ rb4xx_add_device_spi();
++
++ ar71xx_add_device_mdio(0xffffffe0);
++
++ ar71xx_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_MII;
++ ar71xx_eth0_data.phy_mask = 0x0000000f;
++ ar71xx_eth0_data.speed = SPEED_100;
++ ar71xx_eth0_data.duplex = DUPLEX_FULL;
++
++ ar71xx_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_RMII;
++ ar71xx_eth1_data.phy_mask = 0x00000010;
++
++ ar71xx_add_device_eth(1);
++ ar71xx_add_device_eth(0);
++}
++
++MIPS_MACHINE(AR71XX_MACH_RB_450, "MikroTik RouterBOARD 450", rb450_setup);
++
++static void __init rb493_setup(void)
++{
++ rb4xx_generic_setup();
++ rb4xx_add_device_spi();
++
++ ar71xx_add_device_mdio(0x3fffff00);
++
++ ar71xx_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_MII;
++ ar71xx_eth0_data.phy_mask = 0;
++ ar71xx_eth0_data.speed = SPEED_100;
++ ar71xx_eth0_data.duplex = DUPLEX_FULL;
++
++ ar71xx_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_RMII;
++ ar71xx_eth1_data.phy_mask = 0x00000001;
++
++ ar71xx_add_device_eth(0);
++ ar71xx_add_device_eth(1);
++
++ ar71xx_pci_init(ARRAY_SIZE(rb4xx_pci_irqs), rb4xx_pci_irqs);
++}
++
++MIPS_MACHINE(AR71XX_MACH_RB_493, "MikroTik RouterBOARD 493/AH", rb493_setup);
+diff -Nur linux-2.6.29.1.orig/arch/mips/ar71xx/mach-tew-632brp.c linux-2.6.29.1/arch/mips/ar71xx/mach-tew-632brp.c
+--- linux-2.6.29.1.orig/arch/mips/ar71xx/mach-tew-632brp.c 1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.29.1/arch/mips/ar71xx/mach-tew-632brp.c 2009-04-13 14:27:34.559070024 +0200
+@@ -0,0 +1,142 @@
++/*
++ * TrendNET TEW-632BRP board support
++ *
++ * Copyright (C) 2008-2009 Gabor Juhos <juhosg@openwrt.org>
++ * Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org>
++ *
++ * This program is free software; you can redistribute it and/or modify it
++ * under the terms of the GNU General Public License version 2 as published
++ * by the Free Software Foundation.
++ */
++
++#include <linux/platform_device.h>
++#include <linux/mtd/mtd.h>
++#include <linux/mtd/partitions.h>
++#include <linux/spi/spi.h>
++#include <linux/spi/flash.h>
++#include <linux/input.h>
++
++#include <asm/mips_machine.h>
++
++#include <asm/mach-ar71xx/ar71xx.h>
++
++#include "devices.h"
++
++#define TEW_632BRP_GPIO_LED_STATUS 1
++#define TEW_632BRP_GPIO_LED_WPS 3
++#define TEW_632BRP_GPIO_LED_WLAN 6
++#define TEW_632BRP_GPIO_BTN_WPS 12
++#define TEW_632BRP_GPIO_BTN_RESET 21
++
++#define TEW_632BRP_BUTTONS_POLL_INTERVAL 20
++
++#ifdef CONFIG_MTD_PARTITIONS
++static struct mtd_partition tew_632brp_partitions[] = {
++ {
++ .name = "u-boot",
++ .offset = 0,
++ .size = 0x020000,
++ .mask_flags = MTD_WRITEABLE,
++ } , {
++ .name = "config",
++ .offset = 0x020000,
++ .size = 0x010000,
++ } , {
++ .name = "kernel",
++ .offset = 0x030000,
++ .size = 0x0c0000,
++ } , {
++ .name = "rootfs",
++ .offset = 0x0f0000,
++ .size = 0x300000,
++ } , {
++ .name = "art",
++ .offset = 0x3f0000,
++ .size = 0x010000,
++ .mask_flags = MTD_WRITEABLE,
++ } , {
++ .name = "firmware",
++ .offset = 0x030000,
++ .size = 0x3c0000,
++ }
++};
++#endif /* CONFIG_MTD_PARTITIONS */
++
++static struct flash_platform_data tew_632brp_flash_data = {
++#ifdef CONFIG_MTD_PARTITIONS
++ .parts = tew_632brp_partitions,
++ .nr_parts = ARRAY_SIZE(tew_632brp_partitions),
++#endif
++};
++
++static struct spi_board_info tew_632brp_spi_info[] = {
++ {
++ .bus_num = 0,
++ .chip_select = 0,
++ .max_speed_hz = 25000000,
++ .modalias = "m25p80",
++ .platform_data = &tew_632brp_flash_data,
++ }
++};
++
++static struct gpio_led tew_632brp_leds_gpio[] __initdata = {
++ {
++ .name = "tew-632brp:green:status",
++ .gpio = TEW_632BRP_GPIO_LED_STATUS,
++ .active_low = 1,
++ }, {
++ .name = "tew-632brp:blue:wps",
++ .gpio = TEW_632BRP_GPIO_LED_WPS,
++ .active_low = 1,
++ }, {
++ .name = "tew-632brp:green:wlan",
++ .gpio = TEW_632BRP_GPIO_LED_WLAN,
++ .active_low = 1,
++ }
++};
++
++static struct gpio_button tew_632brp_gpio_buttons[] __initdata = {
++ {
++ .desc = "reset",
++ .type = EV_KEY,
++ .code = BTN_0,
++ .threshold = 5,
++ .gpio = TEW_632BRP_GPIO_BTN_RESET,
++ }, {
++ .desc = "wps",
++ .type = EV_KEY,
++ .code = BTN_1,
++ .threshold = 5,
++ .gpio = TEW_632BRP_GPIO_BTN_WPS,
++ }
++};
++
++static void __init tew_632brp_setup(void)
++{
++ ar71xx_add_device_mdio(0x0);
++
++ ar71xx_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RMII;
++ ar71xx_eth0_data.phy_mask = 0xf;
++ ar71xx_eth0_data.speed = SPEED_100;
++ ar71xx_eth0_data.duplex = DUPLEX_FULL;
++
++ ar71xx_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_RMII;
++ ar71xx_eth1_data.phy_mask = 0x10;
++
++ ar71xx_add_device_eth(0);
++ ar71xx_add_device_eth(1);
++
++ ar71xx_add_device_spi(NULL, tew_632brp_spi_info,
++ ARRAY_SIZE(tew_632brp_spi_info));
++
++ ar71xx_add_device_leds_gpio(-1, ARRAY_SIZE(tew_632brp_leds_gpio),
++ tew_632brp_leds_gpio);
++
++ ar71xx_add_device_gpio_buttons(-1, TEW_632BRP_BUTTONS_POLL_INTERVAL,
++ ARRAY_SIZE(tew_632brp_gpio_buttons),
++ tew_632brp_gpio_buttons);
++
++ ar91xx_add_device_wmac();
++}
++
++MIPS_MACHINE(AR71XX_MACH_TEW_632BRP, "TRENDnet TEW-632BRP", tew_632brp_setup);
+diff -Nur linux-2.6.29.1.orig/arch/mips/ar71xx/mach-tl-wr941nd.c linux-2.6.29.1/arch/mips/ar71xx/mach-tl-wr941nd.c
+--- linux-2.6.29.1.orig/arch/mips/ar71xx/mach-tl-wr941nd.c 1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.29.1/arch/mips/ar71xx/mach-tl-wr941nd.c 2009-04-13 14:27:34.591071588 +0200
+@@ -0,0 +1,144 @@
++/*
++ * TP-LINK TL-WR941ND board support
++ *
++ * Copyright (C) 2009 Gabor Juhos <juhosg@openwrt.org>
++ *
++ * This program is free software; you can redistribute it and/or modify it
++ * under the terms of the GNU General Public License version 2 as published
++ * by the Free Software Foundation.
++ */
++
++#include <linux/platform_device.h>
++#include <linux/mtd/mtd.h>
++#include <linux/mtd/partitions.h>
++#include <linux/spi/spi.h>
++#include <linux/spi/flash.h>
++#include <linux/input.h>
++
++#include <asm/mips_machine.h>
++
++#include <asm/mach-ar71xx/ar71xx.h>
++
++#include "devices.h"
++
++#define TL_WR941ND_GPIO_LED_SYSTEM 2
++#define TL_WR941ND_GPIO_LED_QSS 5
++
++#define TL_WR941ND_GPIO_BTN_RESET 3
++#define TL_WR941ND_GPIO_BTN_QSS 7
++
++#define TL_WR941ND_BUTTONS_POLL_INTERVAL 20
++
++#ifdef CONFIG_MTD_PARTITIONS
++static struct mtd_partition tl_wr941nd_partitions[] = {
++ {
++ .name = "u-boot",
++ .offset = 0,
++ .size = 0x020000,
++ .mask_flags = MTD_WRITEABLE,
++ } , {
++ .name = "kernel",
++ .offset = 0x020000,
++ .size = 0x120000,
++ } , {
++ .name = "rootfs",
++ .offset = 0x140000,
++ .size = 0x2b0000,
++ } , {
++ .name = "art",
++ .offset = 0x3f0000,
++ .size = 0x010000,
++ .mask_flags = MTD_WRITEABLE,
++ } , {
++ .name = "firmware",
++ .offset = 0x020000,
++ .size = 0x3d0000,
++ }
++};
++#endif /* CONFIG_MTD_PARTITIONS */
++
++static struct flash_platform_data tl_wr941nd_flash_data = {
++#ifdef CONFIG_MTD_PARTITIONS
++ .parts = tl_wr941nd_partitions,
++ .nr_parts = ARRAY_SIZE(tl_wr941nd_partitions),
++#endif
++};
++
++static struct spi_board_info tl_wr941nd_spi_info[] = {
++ {
++ .bus_num = 0,
++ .chip_select = 0,
++ .max_speed_hz = 25000000,
++ .modalias = "m25p80",
++ .platform_data = &tl_wr941nd_flash_data,
++ }
++};
++
++static struct gpio_led tl_wr941nd_leds_gpio[] __initdata = {
++ {
++ .name = "tl-wr941nd:green:system",
++ .gpio = TL_WR941ND_GPIO_LED_SYSTEM,
++ .active_low = 1,
++ }, {
++ .name = "tl-wr941nd:red:qss",
++ .gpio = TL_WR941ND_GPIO_LED_QSS,
++ .active_low = 1,
++ }
++};
++
++static struct gpio_button tl_wr941nd_gpio_buttons[] __initdata = {
++ {
++ .desc = "reset",
++ .type = EV_KEY,
++ .code = BTN_0,
++ .threshold = 5,
++ .gpio = TL_WR941ND_GPIO_BTN_RESET,
++ .active_low = 1,
++ }, {
++ .desc = "qss",
++ .type = EV_KEY,
++ .code = BTN_1,
++ .threshold = 5,
++ .gpio = TL_WR941ND_GPIO_BTN_QSS,
++ .active_low = 1,
++ }
++};
++
++static struct dsa_platform_data tl_wr941nd_dsa_data = {
++ .port_names[0] = "wan",
++ .port_names[1] = "lan1",
++ .port_names[2] = "lan2",
++ .port_names[3] = "lan3",
++ .port_names[4] = "lan4",
++ .port_names[5] = "cpu",
++};
++
++static void __init tl_wr941nd_setup(void)
++{
++ u8 *mac = (u8 *) KSEG1ADDR(0x1f01fc00);
++
++ ar71xx_set_mac_base(mac);
++
++ ar71xx_add_device_mdio(0x0);
++
++ ar71xx_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RMII;
++ ar71xx_eth0_data.phy_mask = 0x0;
++ ar71xx_eth0_data.speed = SPEED_100;
++ ar71xx_eth0_data.duplex = DUPLEX_FULL;
++
++ ar71xx_add_device_eth(0);
++ ar71xx_add_device_dsa(0, &tl_wr941nd_dsa_data);
++
++ ar71xx_add_device_spi(NULL, tl_wr941nd_spi_info,
++ ARRAY_SIZE(tl_wr941nd_spi_info));
++
++ ar71xx_add_device_leds_gpio(-1, ARRAY_SIZE(tl_wr941nd_leds_gpio),
++ tl_wr941nd_leds_gpio);
++
++ ar71xx_add_device_gpio_buttons(-1, TL_WR941ND_BUTTONS_POLL_INTERVAL,
++ ARRAY_SIZE(tl_wr941nd_gpio_buttons),
++ tl_wr941nd_gpio_buttons);
++ ar91xx_add_device_wmac();
++}
++
++MIPS_MACHINE(AR71XX_MACH_TL_WR941ND, "TP-LINK TL-WR941ND", tl_wr941nd_setup);
+diff -Nur linux-2.6.29.1.orig/arch/mips/ar71xx/mach-ubnt.c linux-2.6.29.1/arch/mips/ar71xx/mach-ubnt.c
+--- linux-2.6.29.1.orig/arch/mips/ar71xx/mach-ubnt.c 1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.29.1/arch/mips/ar71xx/mach-ubnt.c 2009-04-13 14:27:34.591071588 +0200
+@@ -0,0 +1,188 @@
++/*
++ * Ubiquiti RouterStation support
++ *
++ * Copyright (C) 2008-2009 Gabor Juhos <juhosg@openwrt.org>
++ * Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org>
++ * Copyright (C) 2008 Ubiquiti <support@ubnt.com>
++ *
++ * This program is free software; you can redistribute it and/or modify it
++ * under the terms of the GNU General Public License version 2 as published
++ * by the Free Software Foundation.
++ */
++
++#include <linux/platform_device.h>
++#include <linux/spi/spi.h>
++#include <linux/spi/flash.h>
++#include <linux/input.h>
++
++#include <asm/mips_machine.h>
++#include <asm/mach-ar71xx/ar71xx.h>
++#include <asm/mach-ar71xx/pci.h>
++
++#include "devices.h"
++
++#define UBNT_RS_GPIO_LED_RF 2
++#define UBNT_RS_GPIO_SW4 8
++
++#define UBNT_LS_SR71_GPIO_LED_D25 0
++#define UBNT_LS_SR71_GPIO_LED_D26 1
++#define UBNT_LS_SR71_GPIO_LED_D24 2
++#define UBNT_LS_SR71_GPIO_LED_D23 4
++#define UBNT_LS_SR71_GPIO_LED_D22 5
++#define UBNT_LS_SR71_GPIO_LED_D27 6
++#define UBNT_LS_SR71_GPIO_LED_D28 7
++
++#define UBNT_BUTTONS_POLL_INTERVAL 20
++
++static struct spi_board_info ubnt_spi_info[] = {
++ {
++ .bus_num = 0,
++ .chip_select = 0,
++ .max_speed_hz = 25000000,
++ .modalias = "m25p80",
++ }
++};
++
++static struct ar71xx_pci_irq ubnt_pci_irqs[] __initdata = {
++ {
++ .slot = 0,
++ .pin = 1,
++ .irq = AR71XX_PCI_IRQ_DEV0,
++ }, {
++ .slot = 1,
++ .pin = 1,
++ .irq = AR71XX_PCI_IRQ_DEV1,
++ }, {
++ .slot = 2,
++ .pin = 1,
++ .irq = AR71XX_PCI_IRQ_DEV2,
++ }
++};
++
++static struct gpio_led ubnt_rs_leds_gpio[] __initdata = {
++ {
++ .name = "ubnt:green:rf",
++ .gpio = UBNT_RS_GPIO_LED_RF,
++ .active_low = 0,
++ }
++};
++
++static struct gpio_led ubnt_ls_sr71_leds_gpio[] __initdata = {
++ {
++ .name = "ubnt:green:d22",
++ .gpio = UBNT_LS_SR71_GPIO_LED_D22,
++ .active_low = 0,
++ }, {
++ .name = "ubnt:green:d23",
++ .gpio = UBNT_LS_SR71_GPIO_LED_D23,
++ .active_low = 0,
++ }, {
++ .name = "ubnt:green:d24",
++ .gpio = UBNT_LS_SR71_GPIO_LED_D24,
++ .active_low = 0,
++ }, {
++ .name = "ubnt:red:d25",
++ .gpio = UBNT_LS_SR71_GPIO_LED_D25,
++ .active_low = 0,
++ }, {
++ .name = "ubnt:red:d26",
++ .gpio = UBNT_LS_SR71_GPIO_LED_D26,
++ .active_low = 0,
++ }, {
++ .name = "ubnt:green:d27",
++ .gpio = UBNT_LS_SR71_GPIO_LED_D27,
++ .active_low = 0,
++ }, {
++ .name = "ubnt:green:d28",
++ .gpio = UBNT_LS_SR71_GPIO_LED_D28,
++ .active_low = 0,
++ }
++};
++
++static struct gpio_button ubnt_gpio_buttons[] __initdata = {
++ {
++ .desc = "sw4",
++ .type = EV_KEY,
++ .code = BTN_0,
++ .threshold = 5,
++ .gpio = UBNT_RS_GPIO_SW4,
++ .active_low = 1,
++ }
++};
++
++static void __init ubnt_generic_setup(void)
++{
++ ar71xx_add_device_spi(NULL, ubnt_spi_info,
++ ARRAY_SIZE(ubnt_spi_info));
++
++ ar71xx_add_device_gpio_buttons(-1, UBNT_BUTTONS_POLL_INTERVAL,
++ ARRAY_SIZE(ubnt_gpio_buttons),
++ ubnt_gpio_buttons);
++
++ ar71xx_pci_init(ARRAY_SIZE(ubnt_pci_irqs), ubnt_pci_irqs);
++}
++
++#define UBNT_RS_WAN_PHYMASK (1 << 20)
++#define UBNT_RS_LAN_PHYMASK ((1 << 16) | (1 << 17) | (1 << 18) | (1 << 19))
++
++static void __init ubnt_rs_setup(void)
++{
++ ubnt_generic_setup();
++
++ ar71xx_add_device_mdio(~(UBNT_RS_WAN_PHYMASK | UBNT_RS_LAN_PHYMASK));
++
++ ar71xx_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_MII;
++ ar71xx_eth0_data.phy_mask = UBNT_RS_WAN_PHYMASK;
++
++ ar71xx_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_RMII;
++ ar71xx_eth1_data.phy_mask = UBNT_RS_LAN_PHYMASK;
++
++ ar71xx_eth1_data.speed = SPEED_100;
++ ar71xx_eth1_data.duplex = DUPLEX_FULL;
++
++ ar71xx_add_device_eth(0);
++ ar71xx_add_device_eth(1);
++
++ ar71xx_add_device_usb();
++
++ ar71xx_add_device_leds_gpio(-1, ARRAY_SIZE(ubnt_rs_leds_gpio),
++ ubnt_rs_leds_gpio);
++}
++
++MIPS_MACHINE(AR71XX_MACH_UBNT_RS, "Ubiquiti RouterStation", ubnt_rs_setup);
++
++static void __init ubnt_rspro_setup(void)
++{
++ ubnt_generic_setup();
++
++ ar71xx_add_device_usb();
++}
++
++MIPS_MACHINE(AR71XX_MACH_UBNT_RSPRO, "Ubiquiti RouterStation Pro",
++ ubnt_rspro_setup);
++
++static void __init ubnt_lsx_setup(void)
++{
++ ubnt_generic_setup();
++}
++
++MIPS_MACHINE(AR71XX_MACH_UBNT_LSX, "Ubiquiti LSX", ubnt_lsx_setup);
++
++#define UBNT_LSSR71_PHY_MASK (1 << 1)
++
++static void __init ubnt_lssr71_setup(void)
++{
++ ubnt_generic_setup();
++
++ ar71xx_add_device_mdio(~UBNT_LSSR71_PHY_MASK);
++
++ ar71xx_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_MII;
++ ar71xx_eth0_data.phy_mask = UBNT_LSSR71_PHY_MASK;
++
++ ar71xx_add_device_eth(0);
++
++ ar71xx_add_device_leds_gpio(-1, ARRAY_SIZE(ubnt_ls_sr71_leds_gpio),
++ ubnt_ls_sr71_leds_gpio);
++}
++
++MIPS_MACHINE(AR71XX_MACH_UBNT_LSSR71, "Ubiquiti LS-SR71", ubnt_lssr71_setup);
+diff -Nur linux-2.6.29.1.orig/arch/mips/ar71xx/mach-wnr2000.c linux-2.6.29.1/arch/mips/ar71xx/mach-wnr2000.c
+--- linux-2.6.29.1.orig/arch/mips/ar71xx/mach-wnr2000.c 1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.29.1/arch/mips/ar71xx/mach-wnr2000.c 2009-04-13 14:27:34.595070701 +0200
+@@ -0,0 +1,158 @@
++/*
++ * NETGEAR WNR2000 board support
++ *
++ * Copyright (C) 2008-2009 Gabor Juhos <juhosg@openwrt.org>
++ * Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org>
++ * Copyright (C) 2008-2009 Andy Boyett <agb@openwrt.org>
++ *
++ * This program is free software; you can redistribute it and/or modify it
++ * under the terms of the GNU General Public License version 2 as published
++ * by the Free Software Foundation.
++ */
++
++#include <linux/platform_device.h>
++#include <linux/mtd/mtd.h>
++#include <linux/mtd/partitions.h>
++#include <linux/spi/spi.h>
++#include <linux/spi/flash.h>
++#include <linux/input.h>
++
++#include <asm/mips_machine.h>
++
++#include <asm/mach-ar71xx/ar71xx.h>
++
++#include "devices.h"
++
++#define WNR2000_GPIO_LED_PWR_GREEN 14
++#define WNR2000_GPIO_LED_PWR_AMBER 7
++#define WNR2000_GPIO_LED_WPS 4
++#define WNR2000_GPIO_LED_WLAN 6
++#define WNR2000_GPIO_BTN_RESET 21
++#define WNR2000_GPIO_BTN_WPS 8
++
++#define WNR2000_BUTTONS_POLL_INTERVAL 20
++
++#ifdef CONFIG_MTD_PARTITIONS
++static struct mtd_partition wnr2000_partitions[] = {
++ {
++ .name = "u-boot",
++ .offset = 0,
++ .size = 0x040000,
++ .mask_flags = MTD_WRITEABLE,
++ } , {
++ .name = "u-boot-env",
++ .offset = 0x040000,
++ .size = 0x010000,
++ } , {
++ .name = "rootfs",
++ .offset = 0x050000,
++ .size = 0x240000,
++ } , {
++ .name = "user-config",
++ .offset = 0x290000,
++ .size = 0x010000,
++ } , {
++ .name = "uImage",
++ .offset = 0x2a0000,
++ .size = 0x120000,
++ } , {
++ .name = "language_table",
++ .offset = 0x3c0000,
++ .size = 0x020000,
++ } , {
++ .name = "rootfs_checksum",
++ .offset = 0x3e0000,
++ .size = 0x010000,
++ } , {
++ .name = "art",
++ .offset = 0x3f0000,
++ .size = 0x010000,
++ .mask_flags = MTD_WRITEABLE,
++ }
++};
++#endif /* CONFIG_MTD_PARTITIONS */
++
++static struct flash_platform_data wnr2000_flash_data = {
++#ifdef CONFIG_MTD_PARTITIONS
++ .parts = wnr2000_partitions,
++ .nr_parts = ARRAY_SIZE(wnr2000_partitions),
++#endif
++};
++
++static struct spi_board_info wnr2000_spi_info[] = {
++ {
++ .bus_num = 0,
++ .chip_select = 0,
++ .max_speed_hz = 25000000,
++ .modalias = "m25p80",
++ .platform_data = &wnr2000_flash_data,
++ }
++};
++
++static struct gpio_led wnr2000_leds_gpio[] __initdata = {
++ {
++ .name = "wnr2000:green:power",
++ .gpio = WNR2000_GPIO_LED_PWR_GREEN,
++ .active_low = 1,
++ }, {
++ .name = "wnr2000:amber:power",
++ .gpio = WNR2000_GPIO_LED_PWR_AMBER,
++ .active_low = 1,
++ }, {
++ .name = "wnr2000:green:wps",
++ .gpio = WNR2000_GPIO_LED_WPS,
++ .active_low = 1,
++ }, {
++ .name = "wnr2000:blue:wlan",
++ .gpio = WNR2000_GPIO_LED_WLAN,
++ .active_low = 1,
++ }
++};
++
++static struct gpio_button wnr2000_gpio_buttons[] __initdata = {
++ {
++ .desc = "reset",
++ .type = EV_KEY,
++ .code = BTN_0,
++ .threshold = 5,
++ .gpio = WNR2000_GPIO_BTN_RESET,
++ }, {
++ .desc = "wps",
++ .type = EV_KEY,
++ .code = BTN_1,
++ .threshold = 5,
++ .gpio = WNR2000_GPIO_BTN_WPS,
++ }
++};
++
++static void __init wnr2000_setup(void)
++{
++ ar71xx_add_device_mdio(0x0);
++
++ ar71xx_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RMII;
++ ar71xx_eth0_data.phy_mask = 0xf;
++ ar71xx_eth0_data.speed = SPEED_100;
++ ar71xx_eth0_data.duplex = DUPLEX_FULL;
++ ar71xx_eth0_data.has_ar8216 = 1;
++
++ ar71xx_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_RMII;
++ ar71xx_eth1_data.phy_mask = 0x10;
++
++ ar71xx_add_device_eth(0);
++ ar71xx_add_device_eth(1);
++
++ ar71xx_add_device_spi(NULL, wnr2000_spi_info,
++ ARRAY_SIZE(wnr2000_spi_info));
++
++ ar71xx_add_device_leds_gpio(-1, ARRAY_SIZE(wnr2000_leds_gpio),
++ wnr2000_leds_gpio);
++
++ ar71xx_add_device_gpio_buttons(-1, WNR2000_BUTTONS_POLL_INTERVAL,
++ ARRAY_SIZE(wnr2000_gpio_buttons),
++ wnr2000_gpio_buttons);
++
++
++ ar91xx_add_device_wmac();
++}
++
++MIPS_MACHINE(AR71XX_MACH_WNR2000, "NETGEAR WNR2000", wnr2000_setup);
+diff -Nur linux-2.6.29.1.orig/arch/mips/ar71xx/mach-wp543.c linux-2.6.29.1/arch/mips/ar71xx/mach-wp543.c
+--- linux-2.6.29.1.orig/arch/mips/ar71xx/mach-wp543.c 1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.29.1/arch/mips/ar71xx/mach-wp543.c 2009-04-13 14:27:34.595070701 +0200
+@@ -0,0 +1,118 @@
++/*
++ * Compex WP543 board support
++ *
++ * Copyright (C) 2008-2009 Gabor Juhos <juhosg@openwrt.org>
++ * Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org>
++ *
++ * This program is free software; you can redistribute it and/or modify it
++ * under the terms of the GNU General Public License version 2 as published
++ * by the Free Software Foundation.
++ */
++
++#include <linux/platform_device.h>
++#include <linux/mtd/mtd.h>
++#include <linux/mtd/partitions.h>
++#include <linux/spi/spi.h>
++#include <linux/spi/flash.h>
++#include <linux/input.h>
++
++#include <asm/mips_machine.h>
++#include <asm/mach-ar71xx/ar71xx.h>
++#include <asm/mach-ar71xx/pci.h>
++
++#include "devices.h"
++
++#define WP543_GPIO_SW6 2
++#define WP543_GPIO_LED_1 3
++#define WP543_GPIO_LED_2 4
++#define WP543_GPIO_LED_WLAN 5
++#define WP543_GPIO_LED_CONN 6
++#define WP543_GPIO_LED_DIAG 7
++#define WP543_GPIO_SW4 8
++
++#define WP543_BUTTONS_POLL_INTERVAL 20
++
++static struct spi_board_info wp543_spi_info[] = {
++ {
++ .bus_num = 0,
++ .chip_select = 0,
++ .max_speed_hz = 25000000,
++ .modalias = "m25p80",
++ }
++};
++
++static struct ar71xx_pci_irq wp543_pci_irqs[] __initdata = {
++ {
++ .slot = 1,
++ .pin = 1,
++ .irq = AR71XX_PCI_IRQ_DEV0,
++ }, {
++ .slot = 1,
++ .pin = 2,
++ .irq = AR71XX_PCI_IRQ_DEV1,
++ }
++};
++
++static struct gpio_led wp543_leds_gpio[] __initdata = {
++ {
++ .name = "wp543:green:led1",
++ .gpio = WP543_GPIO_LED_1,
++ .active_low = 1,
++ }, {
++ .name = "wp543:green:led2",
++ .gpio = WP543_GPIO_LED_2,
++ .active_low = 1,
++ }, {
++ .name = "wp543:green:wlan",
++ .gpio = WP543_GPIO_LED_WLAN,
++ .active_low = 1,
++ }, {
++ .name = "wp543:green:conn",
++ .gpio = WP543_GPIO_LED_CONN,
++ .active_low = 1,
++ }, {
++ .name = "wp543:green:diag",
++ .gpio = WP543_GPIO_LED_DIAG,
++ .active_low = 1,
++ }
++};
++
++static struct gpio_button wp543_gpio_buttons[] __initdata = {
++ {
++ .desc = "sw6",
++ .type = EV_KEY,
++ .code = BTN_0,
++ .threshold = 5,
++ .gpio = WP543_GPIO_SW6,
++ }, {
++ .desc = "sw4",
++ .type = EV_KEY,
++ .code = BTN_1,
++ .threshold = 5,
++ .gpio = WP543_GPIO_SW4,
++ }
++};
++
++static void __init wp543_setup(void)
++{
++ ar71xx_add_device_spi(NULL, wp543_spi_info, ARRAY_SIZE(wp543_spi_info));
++
++ ar71xx_add_device_mdio(0xfffffff7);
++
++ ar71xx_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_MII;
++ ar71xx_eth0_data.phy_mask = 0x00000008;
++ ar71xx_add_device_eth(0);
++
++ ar71xx_add_device_usb();
++
++ ar71xx_pci_init(ARRAY_SIZE(wp543_pci_irqs), wp543_pci_irqs);
++
++ ar71xx_add_device_leds_gpio(-1, ARRAY_SIZE(wp543_leds_gpio),
++ wp543_leds_gpio);
++
++ ar71xx_add_device_gpio_buttons(-1, WP543_BUTTONS_POLL_INTERVAL,
++ ARRAY_SIZE(wp543_gpio_buttons),
++ wp543_gpio_buttons);
++}
++
++MIPS_MACHINE(AR71XX_MACH_WP543, "Compex WP543", wp543_setup);
+diff -Nur linux-2.6.29.1.orig/arch/mips/ar71xx/prom.c linux-2.6.29.1/arch/mips/ar71xx/prom.c
+--- linux-2.6.29.1.orig/arch/mips/ar71xx/prom.c 1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.29.1/arch/mips/ar71xx/prom.c 2009-04-13 14:27:34.595070701 +0200
+@@ -0,0 +1,207 @@
++/*
++ * Atheros AR71xx SoC specific prom routines
++ *
++ * Copyright (C) 2008-2009 Gabor Juhos <juhosg@openwrt.org>
++ * Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org>
++ *
++ * This program is free software; you can redistribute it and/or modify it
++ * under the terms of the GNU General Public License version 2 as published
++ * by the Free Software Foundation.
++ */
++
++#include <linux/kernel.h>
++#include <linux/init.h>
++#include <linux/io.h>
++#include <linux/serial_reg.h>
++
++#include <asm/bootinfo.h>
++#include <asm/addrspace.h>
++
++#include <asm/mach-ar71xx/ar71xx.h>
++
++#include "devices.h"
++
++struct board_rec {
++ char *name;
++ unsigned long mach_type;
++};
++
++static int ar71xx_prom_argc __initdata;
++static char **ar71xx_prom_argv __initdata;
++static char **ar71xx_prom_envp __initdata;
++
++static struct board_rec boards[] __initdata = {
++ {
++ .name = "411",
++ .mach_type = AR71XX_MACH_RB_411,
++ }, {
++ .name = "433",
++ .mach_type = AR71XX_MACH_RB_433,
++ }, {
++ .name = "450",
++ .mach_type = AR71XX_MACH_RB_450,
++ }, {
++ .name = "493",
++ .mach_type = AR71XX_MACH_RB_493,
++ }, {
++ .name = "AP81",
++ .mach_type = AR71XX_MACH_AP81,
++ }, {
++ .name = "AP83",
++ .mach_type = AR71XX_MACH_AP83,
++ }, {
++ .name = "AW-NR580",
++ .mach_type = AR71XX_MACH_AW_NR580,
++ }, {
++ .name = "TEW-632BRP",
++ .mach_type = AR71XX_MACH_TEW_632BRP,
++ }, {
++ .name = "TL-WR941ND",
++ .mach_type = AR71XX_MACH_TL_WR941ND,
++ }, {
++ .name = "UBNT-RS",
++ .mach_type = AR71XX_MACH_UBNT_RS,
++ }, {
++ .name = "UBNT-RSPRO",
++ .mach_type = AR71XX_MACH_UBNT_RSPRO,
++ }, {
++ .name = "Ubiquiti AR71xx-based board",
++ .mach_type = AR71XX_MACH_UBNT_RS,
++ }, {
++ .name = "UBNT-LS-SR71",
++ .mach_type = AR71XX_MACH_UBNT_LSSR71,
++ }, {
++ .name = "UBNT-LSX",
++ .mach_type = AR71XX_MACH_UBNT_LSX,
++ }, {
++ .name = "WNR2000",
++ .mach_type = AR71XX_MACH_WNR2000,
++ }, {
++ .name = "PB42",
++ .mach_type = AR71XX_MACH_PB42,
++ }, {
++ .name = "MZK-W300NH",
++ .mach_type = AR71XX_MACH_MZK_W300NH,
++ }, {
++ .name = "MZK-W04NU",
++ .mach_type = AR71XX_MACH_MZK_W04NU,
++ }
++};
++
++static inline int is_valid_ram_addr(void *addr)
++{
++ if (((u32) addr > KSEG0) &&
++ ((u32) addr < (KSEG0 + AR71XX_MEM_SIZE_MAX)))
++ return 1;
++
++ if (((u32) addr > KSEG1) &&
++ ((u32) addr < (KSEG1 + AR71XX_MEM_SIZE_MAX)))
++ return 1;
++
++ return 0;
++}
++
++static __init char *ar71xx_prom_getargv(const char *name)
++{
++ int len = strlen(name);
++ int i;
++
++ if (!is_valid_ram_addr(ar71xx_prom_argv))
++ return NULL;
++
++ for (i = 0; i < ar71xx_prom_argc; i++) {
++ char *argv = ar71xx_prom_argv[i];
++
++ if (!is_valid_ram_addr(argv))
++ continue;
++
++ if (strncmp(name, argv, len) == 0 && (argv)[len] == '=')
++ return argv + len + 1;
++ }
++
++ return NULL;
++}
++
++static __init char *ar71xx_prom_getenv(const char *envname)
++{
++ int len = strlen(envname);
++ char **env;
++
++ if (!is_valid_ram_addr(ar71xx_prom_envp))
++ return NULL;
++
++ for (env = ar71xx_prom_envp; is_valid_ram_addr(*env); env++) {
++ if (strncmp(envname, *env, len) == 0 && (*env)[len] == '=')
++ return *env + len + 1;
++
++ /* RedBoot env comes in pointer pairs - key, value */
++ if (strncmp(envname, *env, len) == 0 && (*env)[len] == 0)
++ if (is_valid_ram_addr(*(++env)))
++ return *env;
++ }
++
++ return NULL;
++}
++
++static __init unsigned long find_board_byname(char *name)
++{
++ int i;
++
++ for (i = 0; i < ARRAY_SIZE(boards); i++)
++ if (strcmp(name, boards[i].name) == 0)
++ return boards[i].mach_type;
++
++ return AR71XX_MACH_GENERIC;
++}
++
++
++static void ar71xx_prom_init_generic(void)
++{
++ char *p;
++
++ ar71xx_prom_argc = fw_arg0;
++ ar71xx_prom_argv = (char **)fw_arg1;
++ ar71xx_prom_envp = (char **)fw_arg2;
++
++ p = ar71xx_prom_getargv("board");
++ if (!p)
++ p = ar71xx_prom_getenv("board");
++ if (p)
++ ar71xx_mach_type = find_board_byname(p);
++
++ p = ar71xx_prom_getenv("ethaddr");
++ if (!p)
++ p = ar71xx_prom_getargv("kmac");
++ if (p)
++ ar71xx_parse_mac_addr(p);
++}
++
++void __init prom_init(void)
++{
++ printk(KERN_DEBUG "prom: fw_arg0=%08x, fw_arg1=%08x, "
++ "fw_arg2=%08x, fw_arg3=%08x\n",
++ (unsigned int)fw_arg0, (unsigned int)fw_arg1,
++ (unsigned int)fw_arg2, (unsigned int)fw_arg3);
++
++ ar71xx_mach_type = AR71XX_MACH_GENERIC;
++
++ ar71xx_prom_init_generic();
++}
++
++void __init prom_free_prom_memory(void)
++{
++ /* We do not have to prom memory to free */
++}
++
++#define UART_READ(r) \
++ __raw_readl((void __iomem *)(KSEG1ADDR(AR71XX_UART_BASE) + 4 * (r)))
++
++#define UART_WRITE(r, v) \
++ __raw_writel((v), (void __iomem *)(KSEG1ADDR(AR71XX_UART_BASE) + 4*(r)))
++
++void prom_putchar(unsigned char ch)
++{
++ while (((UART_READ(UART_LSR)) & UART_LSR_THRE) == 0);
++ UART_WRITE(UART_TX, ch);
++ while (((UART_READ(UART_LSR)) & UART_LSR_THRE) == 0);
++}
+diff -Nur linux-2.6.29.1.orig/arch/mips/ar71xx/setup.c linux-2.6.29.1/arch/mips/ar71xx/setup.c
+--- linux-2.6.29.1.orig/arch/mips/ar71xx/setup.c 1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.29.1/arch/mips/ar71xx/setup.c 2009-04-13 14:27:34.599071210 +0200
+@@ -0,0 +1,291 @@
++/*
++ * Atheros AR71xx SoC specific setup
++ *
++ * Copyright (C) 2008-2009 Gabor Juhos <juhosg@openwrt.org>
++ * Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org>
++ *
++ * Parts of this file are based on Atheros' 2.6.15 BSP
++ *
++ * This program is free software; you can redistribute it and/or modify it
++ * under the terms of the GNU General Public License version 2 as published
++ * by the Free Software Foundation.
++ */
++
++#include <linux/kernel.h>
++#include <linux/module.h>
++#include <linux/init.h>
++#include <linux/types.h>
++#include <linux/pci.h>
++#include <linux/serial_8250.h>
++#include <linux/bootmem.h>
++
++#include <asm/bootinfo.h>
++#include <asm/traps.h>
++#include <asm/time.h> /* for mips_hpt_frequency */
++#include <asm/reboot.h> /* for _machine_{restart,halt} */
++#include <asm/mips_machine.h>
++
++#include <asm/mach-ar71xx/ar71xx.h>
++#include <asm/mach-ar71xx/pci.h>
++
++#include "devices.h"
++
++#define AR71XX_SYS_TYPE_LEN 64
++#define AR71XX_BASE_FREQ 40000000
++#define AR91XX_BASE_FREQ 5000000
++
++unsigned long ar71xx_mach_type;
++
++u32 ar71xx_cpu_freq;
++EXPORT_SYMBOL_GPL(ar71xx_cpu_freq);
++
++u32 ar71xx_ahb_freq;
++EXPORT_SYMBOL_GPL(ar71xx_ahb_freq);
++
++u32 ar71xx_ddr_freq;
++EXPORT_SYMBOL_GPL(ar71xx_ddr_freq);
++
++enum ar71xx_soc_type ar71xx_soc;
++EXPORT_SYMBOL_GPL(ar71xx_soc);
++
++int (*ar71xx_pci_bios_init)(unsigned nr_irqs,
++ struct ar71xx_pci_irq *map) __initdata;
++
++int (*ar71xx_pci_be_handler)(int is_fixup);
++
++static char ar71xx_sys_type[AR71XX_SYS_TYPE_LEN];
++
++static void ar71xx_restart(char *command)
++{
++ ar71xx_device_stop(RESET_MODULE_FULL_CHIP);
++ for (;;)
++ if (cpu_wait)
++ cpu_wait();
++}
++
++static void ar71xx_halt(void)
++{
++ while (1)
++ cpu_wait();
++}
++
++static int ar71xx_be_handler(struct pt_regs *regs, int is_fixup)
++{
++ int err = 0;
++
++ if (ar71xx_pci_be_handler)
++ err = ar71xx_pci_be_handler(is_fixup);
++
++ return (is_fixup && !err) ? MIPS_BE_FIXUP : MIPS_BE_FATAL;
++}
++
++int __init ar71xx_pci_init(unsigned nr_irqs, struct ar71xx_pci_irq *map)
++{
++ if (!ar71xx_pci_bios_init)
++ return 0;
++
++ return ar71xx_pci_bios_init(nr_irqs, map);
++}
++
++static void __init ar71xx_detect_mem_size(void)
++{
++ unsigned long size;
++
++ for (size = AR71XX_MEM_SIZE_MIN; size < AR71XX_MEM_SIZE_MAX;
++ size <<= 1 ) {
++ if (!memcmp(ar71xx_detect_mem_size,
++ ar71xx_detect_mem_size + size, 1024))
++ break;
++ }
++
++ add_memory_region(0, size, BOOT_MEM_RAM);
++}
++
++static void __init ar71xx_detect_sys_type(void)
++{
++ char *chip;
++ u32 id;
++ u32 rev;
++
++ id = ar71xx_reset_rr(AR71XX_RESET_REG_REV_ID) & REV_ID_MASK;
++ rev = (id >> REV_ID_REVISION_SHIFT) & REV_ID_REVISION_MASK;
++
++ switch (id & REV_ID_CHIP_MASK) {
++ case REV_ID_CHIP_AR7130:
++ ar71xx_soc = AR71XX_SOC_AR7130;
++ chip = "7130";
++ break;
++
++ case REV_ID_CHIP_AR7141:
++ ar71xx_soc = AR71XX_SOC_AR7141;
++ chip = "7141";
++ break;
++
++ case REV_ID_CHIP_AR7161:
++ ar71xx_soc = AR71XX_SOC_AR7161;
++ chip = "7161";
++ break;
++
++ case REV_ID_CHIP_AR9130:
++ ar71xx_soc = AR71XX_SOC_AR9130;
++ chip = "9130";
++ break;
++
++ case REV_ID_CHIP_AR9132:
++ ar71xx_soc = AR71XX_SOC_AR9132;
++ chip = "9132";
++ break;
++
++ default:
++ panic("ar71xx: unknown chip id:0x%02x\n", id);
++ }
++
++ sprintf(ar71xx_sys_type, "Atheros AR%s rev %u (id:0x%02x)",
++ chip, rev, id);
++}
++
++static void __init ar91xx_detect_sys_frequency(void)
++{
++ u32 pll;
++ u32 freq;
++ u32 div;
++
++ pll = ar71xx_pll_rr(AR91XX_PLL_REG_CPU_CONFIG);
++
++ div = ((pll >> AR91XX_PLL_DIV_SHIFT) & AR91XX_PLL_DIV_MASK);
++ freq = div * AR91XX_BASE_FREQ;
++
++ ar71xx_cpu_freq = freq;
++
++ div = ((pll >> AR91XX_DDR_DIV_SHIFT) & AR91XX_DDR_DIV_MASK) + 1;
++ ar71xx_ddr_freq = freq / div;
++
++ div = (((pll >> AR91XX_AHB_DIV_SHIFT) & AR91XX_AHB_DIV_MASK) + 1) * 2;
++ ar71xx_ahb_freq = ar71xx_cpu_freq / div;
++}
++
++static void __init ar71xx_detect_sys_frequency(void)
++{
++ u32 pll;
++ u32 freq;
++ u32 div;
++
++ pll = ar71xx_pll_rr(AR71XX_PLL_REG_CPU_CONFIG);
++
++ div = ((pll >> AR71XX_PLL_DIV_SHIFT) & AR71XX_PLL_DIV_MASK) + 1;
++ freq = div * AR71XX_BASE_FREQ;
++
++ div = ((pll >> AR71XX_CPU_DIV_SHIFT) & AR71XX_CPU_DIV_MASK) + 1;
++ ar71xx_cpu_freq = freq / div;
++
++ div = ((pll >> AR71XX_DDR_DIV_SHIFT) & AR71XX_DDR_DIV_MASK) + 1;
++ ar71xx_ddr_freq = freq / div;
++
++ div = (((pll >> AR71XX_AHB_DIV_SHIFT) & AR71XX_AHB_DIV_MASK) + 1) * 2;
++ ar71xx_ahb_freq = ar71xx_cpu_freq / div;
++}
++
++static void __init detect_sys_frequency(void)
++{
++ switch (ar71xx_soc) {
++ case AR71XX_SOC_AR7130:
++ case AR71XX_SOC_AR7141:
++ case AR71XX_SOC_AR7161:
++ ar71xx_detect_sys_frequency();
++ break;
++
++ case AR71XX_SOC_AR9130:
++ case AR71XX_SOC_AR9132:
++ ar91xx_detect_sys_frequency();
++ break;
++
++ default:
++ BUG();
++ }
++}
++
++#ifdef CONFIG_AR71XX_EARLY_SERIAL
++static void __init ar71xx_early_serial_setup(void)
++{
++ struct uart_port p;
++
++ memset(&p, 0, sizeof(p));
++
++ p.flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST | UPF_IOREMAP;
++ p.iotype = UPIO_MEM32;
++ p.uartclk = ar71xx_ahb_freq;
++ p.irq = AR71XX_MISC_IRQ_UART;
++ p.regshift = 2;
++ p.mapbase = AR71XX_UART_BASE;
++
++ early_serial_setup(&p);
++}
++#else
++static inline void ar71xx_early_serial_setup(void) {};
++#endif /* CONFIG_AR71XX_EARLY_SERIAL */
++
++const char *get_system_type(void)
++{
++ return ar71xx_sys_type;
++}
++
++unsigned int __cpuinit get_c0_compare_irq(void)
++{
++ return CP0_LEGACY_COMPARE_IRQ;
++}
++
++void __init plat_mem_setup(void)
++{
++ set_io_port_base(KSEG1);
++
++ ar71xx_ddr_base = ioremap_nocache(AR71XX_DDR_CTRL_BASE,
++ AR71XX_DDR_CTRL_SIZE);
++
++ ar71xx_pll_base = ioremap_nocache(AR71XX_PLL_BASE,
++ AR71XX_PLL_SIZE);
++
++ ar71xx_reset_base = ioremap_nocache(AR71XX_RESET_BASE,
++ AR71XX_RESET_SIZE);
++
++ ar71xx_gpio_base = ioremap_nocache(AR71XX_GPIO_BASE, AR71XX_GPIO_SIZE);
++
++ ar71xx_usb_ctrl_base = ioremap_nocache(AR71XX_USB_CTRL_BASE,
++ AR71XX_USB_CTRL_SIZE);
++
++ ar71xx_detect_mem_size();
++ ar71xx_detect_sys_type();
++ detect_sys_frequency();
++
++ printk(KERN_INFO
++ "%s, CPU:%u.%03u MHz, AHB:%u.%03u MHz, DDR:%u.%03u MHz\n",
++ ar71xx_sys_type,
++ ar71xx_cpu_freq / 1000000, (ar71xx_cpu_freq / 1000) % 1000,
++ ar71xx_ahb_freq / 1000000, (ar71xx_ahb_freq / 1000) % 1000,
++ ar71xx_ddr_freq / 1000000, (ar71xx_ddr_freq / 1000) % 1000);
++
++ _machine_restart = ar71xx_restart;
++ _machine_halt = ar71xx_halt;
++ pm_power_off = ar71xx_halt;
++
++ board_be_handler = ar71xx_be_handler;
++
++ ar71xx_early_serial_setup();
++}
++
++void __init plat_time_init(void)
++{
++ mips_hpt_frequency = ar71xx_cpu_freq / 2;
++}
++
++static int __init ar71xx_machine_setup(void)
++{
++ ar71xx_gpio_init();
++
++ ar71xx_add_device_uart();
++ ar71xx_add_device_wdt();
++
++ mips_machine_setup(ar71xx_mach_type);
++ return 0;
++}
++
++arch_initcall(ar71xx_machine_setup);
+diff -Nur linux-2.6.29.1.orig/arch/mips/include/asm/fw/myloader/myloader.h linux-2.6.29.1/arch/mips/include/asm/fw/myloader/myloader.h
+--- linux-2.6.29.1.orig/arch/mips/include/asm/fw/myloader/myloader.h 1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.29.1/arch/mips/include/asm/fw/myloader/myloader.h 2009-04-13 14:27:34.599071210 +0200
+@@ -0,0 +1,34 @@
++/*
++ * Compex's MyLoader specific definitions
++ *
++ * Copyright (C) 2006-2008 Gabor Juhos <juhosg@openwrt.org>
++ *
++ * This program is free software; you can redistribute it and/or modify it
++ * under the terms of the GNU General Public License version 2 as published
++ * by the Free Software Foundation.
++ *
++ */
++
++#ifndef _ASM_MIPS_FW_MYLOADER_H
++#define _ASM_MIPS_FW_MYLOADER_H
++
++#include <linux/myloader.h>
++
++struct myloader_info {
++ uint32_t vid;
++ uint32_t did;
++ uint32_t svid;
++ uint32_t sdid;
++ uint8_t macs[MYLO_ETHADDR_COUNT][6];
++};
++
++#ifdef CONFIG_MYLOADER
++extern struct myloader_info *myloader_get_info(void) __init;
++#else
++static inline struct myloader_info *myloader_get_info(void)
++{
++ return NULL;
++}
++#endif /* CONFIG_MYLOADER */
++
++#endif /* _ASM_MIPS_FW_MYLOADER_H */
+diff -Nur linux-2.6.29.1.orig/arch/mips/include/asm/mach-ar71xx/ar71xx.h linux-2.6.29.1/arch/mips/include/asm/mach-ar71xx/ar71xx.h
+--- linux-2.6.29.1.orig/arch/mips/include/asm/mach-ar71xx/ar71xx.h 1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.29.1/arch/mips/include/asm/mach-ar71xx/ar71xx.h 2009-04-13 14:27:34.623072313 +0200
+@@ -0,0 +1,438 @@
++/*
++ * Atheros AR71xx SoC specific definitions
++ *
++ * Copyright (C) 2008-2009 Gabor Juhos <juhosg@openwrt.org>
++ * Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org>
++ *
++ * Parts of this file are based on Atheros' 2.6.15 BSP
++ *
++ * This program is free software; you can redistribute it and/or modify it
++ * under the terms of the GNU General Public License version 2 as published
++ * by the Free Software Foundation.
++ */
++
++#ifndef __ASM_MACH_AR71XX_H
++#define __ASM_MACH_AR71XX_H
++
++#include <linux/types.h>
++#include <linux/init.h>
++#include <linux/io.h>
++#include <linux/bitops.h>
++
++#ifndef __ASSEMBLER__
++
++#define AR71XX_PCI_MEM_BASE 0x10000000
++#define AR71XX_PCI_MEM_SIZE 0x08000000
++#define AR71XX_APB_BASE 0x18000000
++#define AR71XX_GE0_BASE 0x19000000
++#define AR71XX_GE0_SIZE 0x01000000
++#define AR71XX_GE1_BASE 0x1a000000
++#define AR71XX_GE1_SIZE 0x01000000
++#define AR71XX_EHCI_BASE 0x1b000000
++#define AR71XX_EHCI_SIZE 0x01000000
++#define AR71XX_OHCI_BASE 0x1c000000
++#define AR71XX_OHCI_SIZE 0x01000000
++#define AR71XX_SPI_BASE 0x1f000000
++#define AR71XX_SPI_SIZE 0x01000000
++
++#define AR71XX_DDR_CTRL_BASE (AR71XX_APB_BASE + 0x00000000)
++#define AR71XX_DDR_CTRL_SIZE 0x10000
++#define AR71XX_CPU_BASE (AR71XX_APB_BASE + 0x00010000)
++#define AR71XX_UART_BASE (AR71XX_APB_BASE + 0x00020000)
++#define AR71XX_UART_SIZE 0x10000
++#define AR71XX_USB_CTRL_BASE (AR71XX_APB_BASE + 0x00030000)
++#define AR71XX_USB_CTRL_SIZE 0x10000
++#define AR71XX_GPIO_BASE (AR71XX_APB_BASE + 0x00040000)
++#define AR71XX_GPIO_SIZE 0x10000
++#define AR71XX_PLL_BASE (AR71XX_APB_BASE + 0x00050000)
++#define AR71XX_PLL_SIZE 0x10000
++#define AR71XX_RESET_BASE (AR71XX_APB_BASE + 0x00060000)
++#define AR71XX_RESET_SIZE 0x10000
++#define AR71XX_MII_BASE (AR71XX_APB_BASE + 0x00070000)
++#define AR71XX_MII_SIZE 0x10000
++#define AR71XX_SLIC_BASE (AR71XX_APB_BASE + 0x00090000)
++#define AR71XX_SLIC_SIZE 0x10000
++#define AR71XX_DMA_BASE (AR71XX_APB_BASE + 0x000A0000)
++#define AR71XX_DMA_SIZE 0x10000
++#define AR71XX_STEREO_BASE (AR71XX_APB_BASE + 0x000B0000)
++#define AR71XX_STEREO_SIZE 0x10000
++#define AR91XX_WMAC_BASE (AR71XX_APB_BASE + 0x000C0000)
++#define AR91XX_WMAC_SIZE 0x30000
++
++#define AR71XX_MEM_SIZE_MIN 0x0200000
++#define AR71XX_MEM_SIZE_MAX 0x8000000
++
++#define AR71XX_CPU_IRQ_BASE 0
++#define AR71XX_MISC_IRQ_BASE 8
++#define AR71XX_MISC_IRQ_COUNT 8
++#define AR71XX_GPIO_IRQ_BASE 16
++#define AR71XX_GPIO_IRQ_COUNT 16
++#define AR71XX_PCI_IRQ_BASE 32
++#define AR71XX_PCI_IRQ_COUNT 4
++
++#define AR71XX_CPU_IRQ_PCI (AR71XX_CPU_IRQ_BASE + 2)
++#define AR71XX_CPU_IRQ_WMAC (AR71XX_CPU_IRQ_BASE + 2)
++#define AR71XX_CPU_IRQ_USB (AR71XX_CPU_IRQ_BASE + 3)
++#define AR71XX_CPU_IRQ_GE0 (AR71XX_CPU_IRQ_BASE + 4)
++#define AR71XX_CPU_IRQ_GE1 (AR71XX_CPU_IRQ_BASE + 5)
++#define AR71XX_CPU_IRQ_MISC (AR71XX_CPU_IRQ_BASE + 6)
++#define AR71XX_CPU_IRQ_TIMER (AR71XX_CPU_IRQ_BASE + 7)
++
++#define AR71XX_MISC_IRQ_TIMER (AR71XX_MISC_IRQ_BASE + 0)
++#define AR71XX_MISC_IRQ_ERROR (AR71XX_MISC_IRQ_BASE + 1)
++#define AR71XX_MISC_IRQ_GPIO (AR71XX_MISC_IRQ_BASE + 2)
++#define AR71XX_MISC_IRQ_UART (AR71XX_MISC_IRQ_BASE + 3)
++#define AR71XX_MISC_IRQ_WDOG (AR71XX_MISC_IRQ_BASE + 4)
++#define AR71XX_MISC_IRQ_PERFC (AR71XX_MISC_IRQ_BASE + 5)
++#define AR71XX_MISC_IRQ_OHCI (AR71XX_MISC_IRQ_BASE + 6)
++#define AR71XX_MISC_IRQ_DMA (AR71XX_MISC_IRQ_BASE + 7)
++
++#define AR71XX_GPIO_IRQ(_x) (AR71XX_GPIO_IRQ_BASE + (_x))
++
++#define AR71XX_PCI_IRQ_DEV0 (AR71XX_PCI_IRQ_BASE + 0)
++#define AR71XX_PCI_IRQ_DEV1 (AR71XX_PCI_IRQ_BASE + 1)
++#define AR71XX_PCI_IRQ_DEV2 (AR71XX_PCI_IRQ_BASE + 2)
++#define AR71XX_PCI_IRQ_CORE (AR71XX_PCI_IRQ_BASE + 3)
++
++extern u32 ar71xx_ahb_freq;
++extern u32 ar71xx_cpu_freq;
++extern u32 ar71xx_ddr_freq;
++
++enum ar71xx_soc_type {
++ AR71XX_SOC_UNKNOWN,
++ AR71XX_SOC_AR7130,
++ AR71XX_SOC_AR7141,
++ AR71XX_SOC_AR7161,
++ AR71XX_SOC_AR9130,
++ AR71XX_SOC_AR9132
++};
++
++extern enum ar71xx_soc_type ar71xx_soc;
++
++extern unsigned long ar71xx_mach_type;
++
++#define AR71XX_MACH_GENERIC 0
++#define AR71XX_MACH_WP543 1 /* Compex WP543 */
++#define AR71XX_MACH_RB_411 2 /* MikroTik RouterBOARD 411/411A/411AH */
++#define AR71XX_MACH_RB_433 3 /* MikroTik RouterBOARD 433/433AH */
++#define AR71XX_MACH_RB_450 4 /* MikroTik RouterBOARD 450 */
++#define AR71XX_MACH_RB_493 5 /* Mikrotik RouterBOARD 493/493AH */
++#define AR71XX_MACH_AW_NR580 6 /* AzureWave AW-NR580 */
++#define AR71XX_MACH_AP83 7 /* Atheros AP83 */
++#define AR71XX_MACH_TEW_632BRP 8 /* TRENDnet TEW-632BRP */
++#define AR71XX_MACH_UBNT_RS 9 /* Ubiquiti RouterStation */
++#define AR71XX_MACH_UBNT_LSX 10 /* Ubiquiti LSX */
++#define AR71XX_MACH_WNR2000 11 /* NETGEAR WNR2000 */
++#define AR71XX_MACH_PB42 12 /* Atheros PB42 */
++#define AR71XX_MACH_MZK_W300NH 13 /* Planex MZK-W300NH */
++#define AR71XX_MACH_MZK_W04NU 14 /* Planex MZK-W04NU */
++#define AR71XX_MACH_UBNT_LSSR71 15 /* Ubiquiti LS-SR71 */
++#define AR71XX_MACH_TL_WR941ND 16 /* TP-LINK TL-WR941ND */
++#define AR71XX_MACH_UBNT_RSPRO 17 /* Ubiquiti RouterStation Pro */
++#define AR71XX_MACH_AP81 18 /* Atheros AP81 */
++
++/*
++ * PLL block
++ */
++#define AR71XX_PLL_REG_CPU_CONFIG 0x00
++#define AR71XX_PLL_REG_SEC_CONFIG 0x04
++#define AR71XX_PLL_REG_ETH0_INT_CLOCK 0x10
++#define AR71XX_PLL_REG_ETH1_INT_CLOCK 0x14
++
++#define AR71XX_PLL_DIV_SHIFT 3
++#define AR71XX_PLL_DIV_MASK 0x1f
++#define AR71XX_CPU_DIV_SHIFT 16
++#define AR71XX_CPU_DIV_MASK 0x3
++#define AR71XX_DDR_DIV_SHIFT 18
++#define AR71XX_DDR_DIV_MASK 0x3
++#define AR71XX_AHB_DIV_SHIFT 20
++#define AR71XX_AHB_DIV_MASK 0x7
++
++#define AR71XX_ETH0_PLL_SHIFT 17
++#define AR71XX_ETH1_PLL_SHIFT 19
++
++#define AR91XX_PLL_REG_CPU_CONFIG 0x00
++#define AR91XX_PLL_REG_ETH_CONFIG 0x04
++#define AR91XX_PLL_REG_ETH0_INT_CLOCK 0x14
++#define AR91XX_PLL_REG_ETH1_INT_CLOCK 0x18
++
++#define AR91XX_PLL_DIV_SHIFT 0
++#define AR91XX_PLL_DIV_MASK 0x3ff
++#define AR91XX_DDR_DIV_SHIFT 22
++#define AR91XX_DDR_DIV_MASK 0x3
++#define AR91XX_AHB_DIV_SHIFT 19
++#define AR91XX_AHB_DIV_MASK 0x1
++
++#define AR91XX_ETH0_PLL_SHIFT 20
++#define AR91XX_ETH1_PLL_SHIFT 22
++
++extern void __iomem *ar71xx_pll_base;
++
++static inline void ar71xx_pll_wr(unsigned reg, u32 val)
++{
++ __raw_writel(val, ar71xx_pll_base + reg);
++}
++
++static inline u32 ar71xx_pll_rr(unsigned reg)
++{
++ return __raw_readl(ar71xx_pll_base + reg);
++}
++
++/*
++ * USB_CONFIG block
++ */
++#define USB_CTRL_REG_FLADJ 0x00
++#define USB_CTRL_REG_CONFIG 0x04
++
++extern void __iomem *ar71xx_usb_ctrl_base;
++
++static inline void ar71xx_usb_ctrl_wr(unsigned reg, u32 val)
++{
++ __raw_writel(val, ar71xx_usb_ctrl_base + reg);
++}
++
++static inline u32 ar71xx_usb_ctrl_rr(unsigned reg)
++{
++ return __raw_readl(ar71xx_usb_ctrl_base + reg);
++}
++
++/*
++ * GPIO block
++ */
++#define GPIO_REG_OE 0x00
++#define GPIO_REG_IN 0x04
++#define GPIO_REG_OUT 0x08
++#define GPIO_REG_SET 0x0c
++#define GPIO_REG_CLEAR 0x10
++#define GPIO_REG_INT_MODE 0x14
++#define GPIO_REG_INT_TYPE 0x18
++#define GPIO_REG_INT_POLARITY 0x1c
++#define GPIO_REG_INT_PENDING 0x20
++#define GPIO_REG_INT_ENABLE 0x24
++#define GPIO_REG_FUNC 0x28
++
++#define GPIO_FUNC_STEREO_EN BIT(17)
++#define GPIO_FUNC_SLIC_EN BIT(16)
++#define GPIO_FUNC_SPI_CS2_EN BIT(13)
++#define GPIO_FUNC_SPI_CS1_EN BIT(12)
++#define GPIO_FUNC_UART_EN BIT(8)
++#define GPIO_FUNC_USB_OC_EN BIT(4)
++#define GPIO_FUNC_USB_CLK_EN BIT(0)
++
++#define AR71XX_GPIO_COUNT 16
++#define AR91XX_GPIO_COUNT 22
++
++extern void __iomem *ar71xx_gpio_base;
++
++static inline void ar71xx_gpio_wr(unsigned reg, u32 value)
++{
++ __raw_writel(value, ar71xx_gpio_base + reg);
++}
++
++static inline u32 ar71xx_gpio_rr(unsigned reg)
++{
++ return __raw_readl(ar71xx_gpio_base + reg);
++}
++
++extern void ar71xx_gpio_init(void) __init;
++extern void ar71xx_gpio_function_enable(u32 mask);
++extern void ar71xx_gpio_function_disable(u32 mask);
++
++/*
++ * DDR_CTRL block
++ */
++#define AR71XX_DDR_REG_PCI_WIN0 0x7c
++#define AR71XX_DDR_REG_PCI_WIN1 0x80
++#define AR71XX_DDR_REG_PCI_WIN2 0x84
++#define AR71XX_DDR_REG_PCI_WIN3 0x88
++#define AR71XX_DDR_REG_PCI_WIN4 0x8c
++#define AR71XX_DDR_REG_PCI_WIN5 0x90
++#define AR71XX_DDR_REG_PCI_WIN6 0x94
++#define AR71XX_DDR_REG_PCI_WIN7 0x98
++#define AR71XX_DDR_REG_FLUSH_GE0 0x9c
++#define AR71XX_DDR_REG_FLUSH_GE1 0xa0
++#define AR71XX_DDR_REG_FLUSH_USB 0xa4
++#define AR71XX_DDR_REG_FLUSH_PCI 0xa8
++
++#define AR91XX_DDR_REG_FLUSH_GE0 0x7c
++#define AR91XX_DDR_REG_FLUSH_GE1 0x80
++#define AR91XX_DDR_REG_FLUSH_USB 0x84
++#define AR91XX_DDR_REG_FLUSH_WMAC 0x88
++
++#define PCI_WIN0_OFFS 0x10000000
++#define PCI_WIN1_OFFS 0x11000000
++#define PCI_WIN2_OFFS 0x12000000
++#define PCI_WIN3_OFFS 0x13000000
++#define PCI_WIN4_OFFS 0x14000000
++#define PCI_WIN5_OFFS 0x15000000
++#define PCI_WIN6_OFFS 0x16000000
++#define PCI_WIN7_OFFS 0x07000000
++
++extern void __iomem *ar71xx_ddr_base;
++
++static inline void ar71xx_ddr_wr(unsigned reg, u32 val)
++{
++ __raw_writel(val, ar71xx_ddr_base + reg);
++}
++
++static inline u32 ar71xx_ddr_rr(unsigned reg)
++{
++ return __raw_readl(ar71xx_ddr_base + reg);
++}
++
++extern void ar71xx_ddr_flush(u32 reg);
++
++/*
++ * PCI block
++ */
++#define AR71XX_PCI_CFG_BASE (AR71XX_PCI_MEM_BASE + PCI_WIN7_OFFS + 0x10000)
++#define AR71XX_PCI_CFG_SIZE 0x100
++
++#define PCI_REG_CRP_AD_CBE 0x00
++#define PCI_REG_CRP_WRDATA 0x04
++#define PCI_REG_CRP_RDDATA 0x08
++#define PCI_REG_CFG_AD 0x0c
++#define PCI_REG_CFG_CBE 0x10
++#define PCI_REG_CFG_WRDATA 0x14
++#define PCI_REG_CFG_RDDATA 0x18
++#define PCI_REG_PCI_ERR 0x1c
++#define PCI_REG_PCI_ERR_ADDR 0x20
++#define PCI_REG_AHB_ERR 0x24
++#define PCI_REG_AHB_ERR_ADDR 0x28
++
++#define PCI_CRP_CMD_WRITE 0x00010000
++#define PCI_CRP_CMD_READ 0x00000000
++#define PCI_CFG_CMD_READ 0x0000000a
++#define PCI_CFG_CMD_WRITE 0x0000000b
++
++#define PCI_IDSEL_ADL_START 17
++
++/*
++ * RESET block
++ */
++#define AR71XX_RESET_REG_TIMER 0x00
++#define AR71XX_RESET_REG_TIMER_RELOAD 0x04
++#define AR71XX_RESET_REG_WDOG_CTRL 0x08
++#define AR71XX_RESET_REG_WDOG 0x0c
++#define AR71XX_RESET_REG_MISC_INT_STATUS 0x10
++#define AR71XX_RESET_REG_MISC_INT_ENABLE 0x14
++#define AR71XX_RESET_REG_PCI_INT_STATUS 0x18
++#define AR71XX_RESET_REG_PCI_INT_ENABLE 0x1c
++#define AR71XX_RESET_REG_GLOBAL_INT_STATUS 0x20
++#define AR71XX_RESET_REG_RESET_MODULE 0x24
++#define AR71XX_RESET_REG_PERFC_CTRL 0x2c
++#define AR71XX_RESET_REG_PERFC0 0x30
++#define AR71XX_RESET_REG_PERFC1 0x34
++#define AR71XX_RESET_REG_REV_ID 0x90
++
++#define AR91XX_RESET_REG_GLOBAL_INT_STATUS 0x18
++#define AR91XX_RESET_REG_RESET_MODULE 0x1c
++#define AR91XX_RESET_REG_PERF_CTRL 0x20
++#define AR91XX_RESET_REG_PERFC0 0x24
++#define AR91XX_RESET_REG_PERFC1 0x28
++
++#define WDOG_CTRL_LAST_RESET BIT(31)
++#define WDOG_CTRL_ACTION_MASK 3
++#define WDOG_CTRL_ACTION_NONE 0 /* no action */
++#define WDOG_CTRL_ACTION_GPI 1 /* general purpose interrupt */
++#define WDOG_CTRL_ACTION_NMI 2 /* NMI */
++#define WDOG_CTRL_ACTION_FCR 3 /* full chip reset */
++
++#define MISC_INT_DMA BIT(7)
++#define MISC_INT_OHCI BIT(6)
++#define MISC_INT_PERFC BIT(5)
++#define MISC_INT_WDOG BIT(4)
++#define MISC_INT_UART BIT(3)
++#define MISC_INT_GPIO BIT(2)
++#define MISC_INT_ERROR BIT(1)
++#define MISC_INT_TIMER BIT(0)
++
++#define PCI_INT_CORE BIT(4)
++#define PCI_INT_DEV2 BIT(2)
++#define PCI_INT_DEV1 BIT(1)
++#define PCI_INT_DEV0 BIT(0)
++
++#define RESET_MODULE_EXTERNAL BIT(28)
++#define RESET_MODULE_FULL_CHIP BIT(24)
++#define RESET_MODULE_AMBA2WMAC BIT(22)
++#define RESET_MODULE_CPU_NMI BIT(21)
++#define RESET_MODULE_CPU_COLD BIT(20)
++#define RESET_MODULE_DMA BIT(19)
++#define RESET_MODULE_SLIC BIT(18)
++#define RESET_MODULE_STEREO BIT(17)
++#define RESET_MODULE_DDR BIT(16)
++#define RESET_MODULE_GE1_MAC BIT(13)
++#define RESET_MODULE_GE1_PHY BIT(12)
++#define RESET_MODULE_USBSUS_OVERRIDE BIT(10)
++#define RESET_MODULE_GE0_MAC BIT(9)
++#define RESET_MODULE_GE0_PHY BIT(8)
++#define RESET_MODULE_USB_OHCI_DLL BIT(6)
++#define RESET_MODULE_USB_HOST BIT(5)
++#define RESET_MODULE_USB_PHY BIT(4)
++#define RESET_MODULE_PCI_BUS BIT(1)
++#define RESET_MODULE_PCI_CORE BIT(0)
++
++#define REV_ID_MASK 0xff
++#define REV_ID_CHIP_MASK 0xf3
++#define REV_ID_CHIP_AR7130 0xa0
++#define REV_ID_CHIP_AR7141 0xa1
++#define REV_ID_CHIP_AR7161 0xa2
++#define REV_ID_CHIP_AR9130 0xb0
++#define REV_ID_CHIP_AR9132 0xb1
++
++#define REV_ID_REVISION_MASK 0x3
++#define REV_ID_REVISION_SHIFT 2
++
++extern void __iomem *ar71xx_reset_base;
++
++static inline void ar71xx_reset_wr(unsigned reg, u32 val)
++{
++ __raw_writel(val, ar71xx_reset_base + reg);
++}
++
++static inline u32 ar71xx_reset_rr(unsigned reg)
++{
++ return __raw_readl(ar71xx_reset_base + reg);
++}
++
++extern void ar71xx_device_stop(u32 mask);
++extern void ar71xx_device_start(u32 mask);
++
++/*
++ * SPI block
++ */
++#define SPI_REG_FS 0x00 /* Function Select */
++#define SPI_REG_CTRL 0x04 /* SPI Control */
++#define SPI_REG_IOC 0x08 /* SPI I/O Control */
++#define SPI_REG_RDS 0x0c /* Read Data Shift */
++
++#define SPI_FS_GPIO BIT(0) /* Enable GPIO mode */
++
++#define SPI_CTRL_RD BIT(6) /* Remap Disable */
++#define SPI_CTRL_DIV_MASK 0x3f
++
++#define SPI_IOC_DO BIT(0) /* Data Out pin */
++#define SPI_IOC_CLK BIT(8) /* CLK pin */
++#define SPI_IOC_CS(n) BIT(16 + (n))
++#define SPI_IOC_CS0 SPI_IOC_CS(0)
++#define SPI_IOC_CS1 SPI_IOC_CS(1)
++#define SPI_IOC_CS2 SPI_IOC_CS(2)
++#define SPI_IOC_CS_ALL (SPI_IOC_CS0 | SPI_IOC_CS1 | SPI_IOC_CS2)
++
++/*
++ * MII_CTRL block
++ */
++#define MII_REG_MII0_CTRL 0x00
++#define MII_REG_MII1_CTRL 0x04
++
++#define MII0_CTRL_IF_GMII 0
++#define MII0_CTRL_IF_MII 1
++#define MII0_CTRL_IF_RGMII 2
++#define MII0_CTRL_IF_RMII 3
++
++#define MII1_CTRL_IF_RGMII 0
++#define MII1_CTRL_IF_RMII 1
++
++#endif /* __ASSEMBLER__ */
++
++#endif /* __ASM_MACH_AR71XX_H */
+diff -Nur linux-2.6.29.1.orig/arch/mips/include/asm/mach-ar71xx/cpu-feature-overrides.h linux-2.6.29.1/arch/mips/include/asm/mach-ar71xx/cpu-feature-overrides.h
+--- linux-2.6.29.1.orig/arch/mips/include/asm/mach-ar71xx/cpu-feature-overrides.h 1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.29.1/arch/mips/include/asm/mach-ar71xx/cpu-feature-overrides.h 2009-04-13 14:27:34.627073939 +0200
+@@ -0,0 +1,56 @@
++/*
++ * Atheros AR71xx specific CPU feature overrides
++ *
++ * Copyright (C) 2008 Gabor Juhos <juhosg@openwrt.org>
++ * Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org>
++ *
++ * This file was derived from: include/asm-mips/cpu-features.h
++ * Copyright (C) 2003, 2004 Ralf Baechle
++ * Copyright (C) 2004 Maciej W. Rozycki
++ *
++ * This program is free software; you can redistribute it and/or modify it
++ * under the terms of the GNU General Public License version 2 as published
++ * by the Free Software Foundation.
++ *
++ */
++#ifndef __ASM_MACH_AR71XX_CPU_FEATURE_OVERRIDES_H
++#define __ASM_MACH_AR71XX_CPU_FEATURE_OVERRIDES_H
++
++#define cpu_has_tlb 1
++#define cpu_has_4kex 1
++#define cpu_has_3k_cache 0
++#define cpu_has_4k_cache 1
++#define cpu_has_tx39_cache 0
++#define cpu_has_sb1_cache 0
++#define cpu_has_fpu 0
++#define cpu_has_32fpr 0
++#define cpu_has_counter 1
++#define cpu_has_watch 1
++#define cpu_has_divec 1
++
++#define cpu_has_prefetch 1
++#define cpu_has_ejtag 1
++#define cpu_has_llsc 1
++
++#define cpu_has_mips16 1
++#define cpu_has_mdmx 0
++#define cpu_has_mips3d 0
++#define cpu_has_smartmips 0
++
++#define cpu_has_mips32r1 1
++#define cpu_has_mips32r2 1
++#define cpu_has_mips64r1 0
++#define cpu_has_mips64r2 0
++
++#define cpu_has_dsp 0
++#define cpu_has_mipsmt 0
++
++#define cpu_has_64bits 0
++#define cpu_has_64bit_zero_reg 0
++#define cpu_has_64bit_gp_regs 0
++#define cpu_has_64bit_addresses 0
++
++#define cpu_dcache_line_size() 32
++#define cpu_icache_line_size() 32
++
++#endif /* __ASM_MACH_AR71XX_CPU_FEATURE_OVERRIDES_H */
+diff -Nur linux-2.6.29.1.orig/arch/mips/include/asm/mach-ar71xx/gpio.h linux-2.6.29.1/arch/mips/include/asm/mach-ar71xx/gpio.h
+--- linux-2.6.29.1.orig/arch/mips/include/asm/mach-ar71xx/gpio.h 1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.29.1/arch/mips/include/asm/mach-ar71xx/gpio.h 2009-04-13 14:27:34.627073939 +0200
+@@ -0,0 +1,53 @@
++/*
++ * Atheros AR71xx GPIO API definitions
++ *
++ * Copyright (C) 2008 Gabor Juhos <juhosg@openwrt.org>
++ * Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org>
++ *
++ * This program is free software; you can redistribute it and/or modify it
++ * under the terms of the GNU General Public License version 2 as published
++ * by the Free Software Foundation.
++ *
++ */
++
++#ifndef __ASM_MACH_AR71XX_GPIO_H
++#define __ASM_MACH_AR71XX_GPIO_H
++
++#define ARCH_NR_GPIOS 64
++#include <asm-generic/gpio.h>
++
++#include <asm/mach-ar71xx/ar71xx.h>
++
++extern unsigned long ar71xx_gpio_count;
++extern void __ar71xx_gpio_set_value(unsigned gpio, int value);
++extern int __ar71xx_gpio_get_value(unsigned gpio);
++
++static inline int gpio_to_irq(unsigned gpio)
++{
++ return AR71XX_GPIO_IRQ(gpio);
++}
++
++static inline int irq_to_gpio(unsigned irq)
++{
++ return irq - AR71XX_GPIO_IRQ_BASE;
++}
++
++static inline int gpio_get_value(unsigned gpio)
++{
++ if (gpio < ar71xx_gpio_count)
++ return __ar71xx_gpio_get_value(gpio);
++
++ return __gpio_get_value(gpio);
++}
++
++static inline void gpio_set_value(unsigned gpio, int value)
++{
++ if (gpio < ar71xx_gpio_count)
++ __ar71xx_gpio_set_value(gpio, value);
++ else
++ __gpio_set_value(gpio, value);
++}
++
++#define gpio_cansleep __gpio_cansleep
++
++#endif /* __ASM_MACH_AR71XX_GPIO_H */
+diff -Nur linux-2.6.29.1.orig/arch/mips/include/asm/mach-ar71xx/irq.h linux-2.6.29.1/arch/mips/include/asm/mach-ar71xx/irq.h
+--- linux-2.6.29.1.orig/arch/mips/include/asm/mach-ar71xx/irq.h 1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.29.1/arch/mips/include/asm/mach-ar71xx/irq.h 2009-04-13 14:27:34.643075140 +0200
+@@ -0,0 +1,17 @@
++/*
++ * Copyright (C) 2008 Gabor Juhos <juhosg@openwrt.org>
++ * Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org>
++ *
++ * This program is free software; you can redistribute it and/or modify it
++ * under the terms of the GNU General Public License version 2 as published
++ * by the Free Software Foundation.
++ */
++#ifndef __ASM_MACH_AR71XX_IRQ_H
++#define __ASM_MACH_AR71XX_IRQ_H
++
++#define MIPS_CPU_IRQ_BASE 0
++#define NR_IRQS 36
++
++#include_next <irq.h>
++
++#endif /* __ASM_MACH_AR71XX_IRQ_H */
+diff -Nur linux-2.6.29.1.orig/arch/mips/include/asm/mach-ar71xx/kernel-entry-init.h linux-2.6.29.1/arch/mips/include/asm/mach-ar71xx/kernel-entry-init.h
+--- linux-2.6.29.1.orig/arch/mips/include/asm/mach-ar71xx/kernel-entry-init.h 1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.29.1/arch/mips/include/asm/mach-ar71xx/kernel-entry-init.h 2009-04-13 14:27:34.643075140 +0200
+@@ -0,0 +1,32 @@
++/*
++ * Atheros AR71xx specific kernel entry setup
++ *
++ * Copyright (C) 2009 Gabor Juhos <juhosg@openwrt.org>
++ *
++ * This program is free software; you can redistribute it and/or modify it
++ * under the terms of the GNU General Public License version 2 as published
++ * by the Free Software Foundation.
++ *
++ */
++#ifndef __ASM_MACH_AR71XX_KERNEL_ENTRY_H
++#define __ASM_MACH_AR71XX_KERNEL_ENTRY_H
++
++ /*
++ * Some bootloaders set the 'Kseg0 coherency algorithm' to
++ * 'Cacheable, noncoherent, write-through, no write allocate'
++ * and this cause performance issues. Let's go and change it to
++ * 'Cacheable, noncoherent, write-back, write allocate'
++ */
++ .macro kernel_entry_setup
++ mfc0 t0, CP0_CONFIG
++ li t1, ~CONF_CM_CMASK
++ and t0, t1
++ ori t0, CONF_CM_CACHABLE_NONCOHERENT
++ mtc0 t0, CP0_CONFIG
++ nop
++ .endm
++
++ .macro smp_slave_setup
++ .endm
++
++#endif /* __ASM_MACH_AR71XX_KERNEL_ENTRY_H */
+diff -Nur linux-2.6.29.1.orig/arch/mips/include/asm/mach-ar71xx/mangle-port.h linux-2.6.29.1/arch/mips/include/asm/mach-ar71xx/mangle-port.h
+--- linux-2.6.29.1.orig/arch/mips/include/asm/mach-ar71xx/mangle-port.h 1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.29.1/arch/mips/include/asm/mach-ar71xx/mangle-port.h 2009-04-13 14:27:34.643075140 +0200
+@@ -0,0 +1,45 @@
++/*
++ * Copyright (C) 2008 Gabor Juhos <juhosg@openwrt.org>
++ * Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org>
++ *
++ * This file was derived from: inlude/asm-mips/mach-generic/mangle-port.h
++ * Copyright (C) 2003, 2004 Ralf Baechle
++ *
++ * This program is free software; you can redistribute it and/or modify it
++ * under the terms of the GNU General Public License version 2 as published
++ * by the Free Software Foundation.
++ */
++
++#ifndef __ASM_MACH_AR71XX_MANGLE_PORT_H
++#define __ASM_MACH_AR71XX_MANGLE_PORT_H
++
++#define __swizzle_addr_b(port) ((port) ^ 3)
++#define __swizzle_addr_w(port) ((port) ^ 2)
++#define __swizzle_addr_l(port) (port)
++#define __swizzle_addr_q(port) (port)
++
++#if defined(CONFIG_SWAP_IO_SPACE)
++
++# define ioswabb(a, x) (x)
++# define __mem_ioswabb(a, x) (x)
++# define ioswabw(a, x) le16_to_cpu(x)
++# define __mem_ioswabw(a, x) (x)
++# define ioswabl(a, x) le32_to_cpu(x)
++# define __mem_ioswabl(a, x) (x)
++# define ioswabq(a, x) le64_to_cpu(x)
++# define __mem_ioswabq(a, x) (x)
++
++#else
++
++# define ioswabb(a, x) (x)
++# define __mem_ioswabb(a, x) (x)
++# define ioswabw(a, x) (x)
++# define __mem_ioswabw(a, x) cpu_to_le16(x)
++# define ioswabl(a, x) (x)
++# define __mem_ioswabl(a, x) cpu_to_le32(x)
++# define ioswabq(a, x) (x)
++# define __mem_ioswabq(a, x) cpu_to_le64(x)
++
++#endif
++
++#endif /* __ASM_MACH_AR71XX_MANGLE_PORT_H */
+diff -Nur linux-2.6.29.1.orig/arch/mips/include/asm/mach-ar71xx/pci.h linux-2.6.29.1/arch/mips/include/asm/mach-ar71xx/pci.h
+--- linux-2.6.29.1.orig/arch/mips/include/asm/mach-ar71xx/pci.h 1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.29.1/arch/mips/include/asm/mach-ar71xx/pci.h 2009-04-13 14:27:34.647074532 +0200
+@@ -0,0 +1,28 @@
++/*
++ * Atheros AR71xx SoC specific PCI definitions
++ *
++ * Copyright (C) 2008 Gabor Juhos <juhosg@openwrt.org>
++ * Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org>
++ *
++ * This program is free software; you can redistribute it and/or modify it
++ * under the terms of the GNU General Public License version 2 as published
++ * by the Free Software Foundation.
++ */
++
++#ifndef __ASM_MACH_AR71XX_PCI_H
++#define __ASM_MACH_AR71XX_PCI_H
++
++struct ar71xx_pci_irq {
++ int irq;
++ u8 slot;
++ u8 pin;
++};
++
++extern int (*ar71xx_pci_be_handler)(int is_fixup);
++extern int (*ar71xx_pci_bios_init)(unsigned nr_irqs,
++ struct ar71xx_pci_irq *map) __initdata;
++
++extern int ar71xx_pci_init(unsigned nr_irqs,
++ struct ar71xx_pci_irq *map) __init;
++
++#endif /* __ASM_MACH_AR71XX_PCI_H */
+diff -Nur linux-2.6.29.1.orig/arch/mips/include/asm/mach-ar71xx/platform.h linux-2.6.29.1/arch/mips/include/asm/mach-ar71xx/platform.h
+--- linux-2.6.29.1.orig/arch/mips/include/asm/mach-ar71xx/platform.h 1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.29.1/arch/mips/include/asm/mach-ar71xx/platform.h 2009-04-13 14:27:34.647074532 +0200
+@@ -0,0 +1,54 @@
++/*
++ * Atheros AR71xx SoC specific platform data definitions
++ *
++ * Copyright (C) 2008-2009 Gabor Juhos <juhosg@openwrt.org>
++ * Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org>
++ *
++ * This program is free software; you can redistribute it and/or modify it
++ * under the terms of the GNU General Public License version 2 as published
++ * by the Free Software Foundation.
++ */
++
++#ifndef __ASM_MACH_AR71XX_PLATFORM_H
++#define __ASM_MACH_AR71XX_PLATFORM_H
++
++#include <linux/if_ether.h>
++#include <linux/skbuff.h>
++#include <linux/phy.h>
++#include <linux/spi/spi.h>
++
++struct ag71xx_platform_data {
++ phy_interface_t phy_if_mode;
++ u32 phy_mask;
++ int speed;
++ int duplex;
++ u32 reset_bit;
++ u32 mii_if;
++ u8 mac_addr[ETH_ALEN];
++
++ u8 has_gbit:1;
++ u8 is_ar91xx:1;
++ u8 has_ar8216:1;
++
++ void (* ddr_flush)(void);
++ void (* set_pll)(u32 pll);
++};
++
++struct ag71xx_mdio_platform_data {
++ u32 phy_mask;
++};
++
++struct ar71xx_ehci_platform_data {
++ u8 is_ar91xx;
++};
++
++struct ar71xx_spi_platform_data {
++ unsigned bus_num;
++ unsigned num_chipselect;
++ u32 (*get_ioc_base)(u8 chip_select, int cs_high, int is_on);
++};
++
++#define AR71XX_SPI_CS_INACTIVE 0
++#define AR71XX_SPI_CS_ACTIVE 1
++
++#endif /* __ASM_MACH_AR71XX_PLATFORM_H */
+diff -Nur linux-2.6.29.1.orig/arch/mips/include/asm/mach-ar71xx/war.h linux-2.6.29.1/arch/mips/include/asm/mach-ar71xx/war.h
+--- linux-2.6.29.1.orig/arch/mips/include/asm/mach-ar71xx/war.h 1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.29.1/arch/mips/include/asm/mach-ar71xx/war.h 2009-04-13 14:27:34.647074532 +0200
+@@ -0,0 +1,25 @@
++/*
++ * This file is subject to the terms and conditions of the GNU General Public
++ * License. See the file "COPYING" in the main directory of this archive
++ * for more details.
++ *
++ * Copyright (C) 2002, 2004, 2007 by Ralf Baechle <ralf@linux-mips.org>
++ */
++#ifndef __ASM_MACH_AR71XX_WAR_H
++#define __ASM_MACH_AR71XX_WAR_H
++
++#define R4600_V1_INDEX_ICACHEOP_WAR 0
++#define R4600_V1_HIT_CACHEOP_WAR 0
++#define R4600_V2_HIT_CACHEOP_WAR 0
++#define R5432_CP0_INTERRUPT_WAR 0
++#define BCM1250_M3_WAR 0
++#define SIBYTE_1956_WAR 0
++#define MIPS4K_ICACHE_REFILL_WAR 0
++#define MIPS_CACHE_SYNC_WAR 0
++#define TX49XX_ICACHE_INDEX_INV_WAR 0
++#define RM9000_CDEX_SMP_WAR 0
++#define ICACHE_REFILLS_WORKAROUND_WAR 0
++#define R10000_LLSC_WAR 0
++#define MIPS34K_MISSED_ITLB_WAR 0
++
++#endif /* __ASM_MACH_AR71XX_WAR_H */
+diff -Nur linux-2.6.29.1.orig/arch/mips/include/asm/time.h linux-2.6.29.1/arch/mips/include/asm/time.h
+--- linux-2.6.29.1.orig/arch/mips/include/asm/time.h 2009-04-02 22:55:27.000000000 +0200
++++ linux-2.6.29.1/arch/mips/include/asm/time.h 2009-04-13 14:30:23.269613602 +0200
+@@ -52,6 +52,7 @@
+ */
+ #ifdef CONFIG_CEVT_R4K_LIB
+ extern unsigned int __weak get_c0_compare_int(void);
++extern unsigned int __weak get_c0_compare_irq(void);
+ extern int r4k_clockevent_init(void);
+ #endif
+
+diff -Nur linux-2.6.29.1.orig/arch/mips/kernel/Makefile linux-2.6.29.1/arch/mips/kernel/Makefile
+--- linux-2.6.29.1.orig/arch/mips/kernel/Makefile 2009-04-02 22:55:27.000000000 +0200
++++ linux-2.6.29.1/arch/mips/kernel/Makefile 2009-04-13 14:27:34.655074992 +0200
+@@ -85,6 +85,7 @@
+
+ obj-$(CONFIG_KEXEC) += machine_kexec.o relocate_kernel.o
+ obj-$(CONFIG_EARLY_PRINTK) += early_printk.o
++obj-$(CONFIG_MIPS_MACHINE) += mips_machine.o
+
+ CFLAGS_cpu-bugs64.o = $(shell if $(CC) $(KBUILD_CFLAGS) -Wa,-mdaddi -c -o /dev/null -xc /dev/null >/dev/null 2>&1; then echo "-DHAVE_AS_SET_DADDI"; fi)
+
+diff -Nur linux-2.6.29.1.orig/arch/mips/kernel/cevt-r4k.c linux-2.6.29.1/arch/mips/kernel/cevt-r4k.c
+--- linux-2.6.29.1.orig/arch/mips/kernel/cevt-r4k.c 2009-04-02 22:55:27.000000000 +0200
++++ linux-2.6.29.1/arch/mips/kernel/cevt-r4k.c 2009-04-13 14:27:34.655074992 +0200
+@@ -15,6 +15,22 @@
+ #include <asm/cevt-r4k.h>
+
+ /*
++ * Compare interrupt can be routed and latched outside the core,
++ * so a single execution hazard barrier may not be enough to give
++ * it time to clear as seen in the Cause register. 4 time the
++ * pipeline depth seems reasonably conservative, and empirically
++ * works better in configurations with high CPU/bus clock ratios.
++ */
++
++#define compare_change_hazard() \
++ do { \
++ irq_disable_hazard(); \
++ irq_disable_hazard(); \
++ irq_disable_hazard(); \
++ irq_disable_hazard(); \
++ } while (0)
++
++/*
+ * The SMTC Kernel for the 34K, 1004K, et. al. replaces several
+ * of these routines with SMTC-specific variants.
+ */
+@@ -30,6 +46,7 @@
+ cnt = read_c0_count();
+ cnt += delta;
+ write_c0_compare(cnt);
++ compare_change_hazard();
+ res = ((int)(read_c0_count() - cnt) > 0) ? -ETIME : 0;
+ return res;
+ }
+@@ -99,22 +116,6 @@
+ return (read_c0_cause() >> cp0_compare_irq) & 0x100;
+ }
+
+-/*
+- * Compare interrupt can be routed and latched outside the core,
+- * so a single execution hazard barrier may not be enough to give
+- * it time to clear as seen in the Cause register. 4 time the
+- * pipeline depth seems reasonably conservative, and empirically
+- * works better in configurations with high CPU/bus clock ratios.
+- */
+-
+-#define compare_change_hazard() \
+- do { \
+- irq_disable_hazard(); \
+- irq_disable_hazard(); \
+- irq_disable_hazard(); \
+- irq_disable_hazard(); \
+- } while (0)
+-
+ int c0_compare_int_usable(void)
+ {
+ unsigned int delta;
+diff -Nur linux-2.6.29.1.orig/arch/mips/kernel/mips_machine.c linux-2.6.29.1/arch/mips/kernel/mips_machine.c
+--- linux-2.6.29.1.orig/arch/mips/kernel/mips_machine.c 1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.29.1/arch/mips/kernel/mips_machine.c 2009-04-13 14:27:34.683076044 +0200
+@@ -0,0 +1,58 @@
++/*
++ * Copyright (C) 2008 Gabor Juhos <juhosg@openwrt.org>
++ *
++ * This program is free software; you can redistribute it and/or modify it
++ * under the terms of the GNU General Public License version 2 as published
++ * by the Free Software Foundation.
++ *
++ */
++
++#include <asm/mips_machine.h>
++#include <asm/bootinfo.h>
++
++static struct list_head mips_machines __initdata =
++ LIST_HEAD_INIT(mips_machines);
++
++unsigned char mips_machine_name[MIPS_MACHINE_NAME_LEN] = "Unknown";
++
++static struct mips_machine * __init mips_machine_find(unsigned long machtype)
++{
++ struct list_head *this;
++
++ list_for_each(this, &mips_machines) {
++ struct mips_machine *mach;
++
++ mach = list_entry(this, struct mips_machine, list);
++ if (mach->mach_type == machtype)
++ return mach;
++ }
++
++ return NULL;
++}
++
++void __init mips_machine_register(struct mips_machine *mach)
++{
++ list_add_tail(&mach->list, &mips_machines);
++}
++
++void __init mips_machine_setup(unsigned long machtype)
++{
++ struct mips_machine *mach;
++
++ mach = mips_machine_find(machtype);
++ if (!mach) {
++ printk(KERN_ALERT "MIPS: no machine registered for "
++ "machtype %lu\n", machtype);
++ return;
++ }
++
++ if (mach->mach_name[0])
++ strncpy(mips_machine_name, mach->mach_name,
++ MIPS_MACHINE_NAME_LEN);
++
++ printk(KERN_INFO "MIPS: machine is %s\n", mips_machine_name);
++
++ if (mach->mach_setup)
++ mach->mach_setup();
++}
++
+diff -Nur linux-2.6.29.1.orig/arch/mips/kernel/proc.c linux-2.6.29.1/arch/mips/kernel/proc.c
+--- linux-2.6.29.1.orig/arch/mips/kernel/proc.c 2009-04-02 22:55:27.000000000 +0200
++++ linux-2.6.29.1/arch/mips/kernel/proc.c 2009-04-13 14:27:34.683076044 +0200
+@@ -14,6 +14,7 @@
+ #include <asm/cpu-features.h>
+ #include <asm/mipsregs.h>
+ #include <asm/processor.h>
++#include <asm/mips_machine.h>
+
+ unsigned int vced_count, vcei_count;
+
+@@ -33,8 +34,12 @@
+ /*
+ * For the first processor also print the system type
+ */
+- if (n == 0)
++ if (n == 0) {
+ seq_printf(m, "system type\t\t: %s\n", get_system_type());
++#ifdef CONFIG_MIPS_MACHINE
++ seq_printf(m, "machine\t\t\t: %s\n", mips_machine_name);
++#endif
++ }
+
+ seq_printf(m, "processor\t\t: %ld\n", n);
+ sprintf(fmt, "cpu model\t\t: %%s V%%d.%%d%s\n",
+diff -Nur linux-2.6.29.1.orig/arch/mips/kernel/traps.c linux-2.6.29.1/arch/mips/kernel/traps.c
+--- linux-2.6.29.1.orig/arch/mips/kernel/traps.c 2009-04-02 22:55:27.000000000 +0200
++++ linux-2.6.29.1/arch/mips/kernel/traps.c 2009-04-13 14:29:45.479250639 +0200
+@@ -47,6 +47,7 @@
+ #include <asm/mmu_context.h>
+ #include <asm/types.h>
+ #include <asm/stacktrace.h>
++#include <asm/time.h>
+ #include <asm/irq.h>
+
+ extern void check_wait(void);
+@@ -1541,6 +1542,8 @@
+ */
+ if (cpu_has_mips_r2) {
+ cp0_compare_irq = (read_c0_intctl() >> 29) & 7;
++ if (get_c0_compare_irq)
++ cp0_compare_irq = get_c0_compare_irq();
+ cp0_perfcount_irq = (read_c0_intctl() >> 26) & 7;
+ if (cp0_perfcount_irq == cp0_compare_irq)
+ cp0_perfcount_irq = -1;
+diff -Nur linux-2.6.29.1.orig/arch/mips/pci/Makefile linux-2.6.29.1/arch/mips/pci/Makefile
+--- linux-2.6.29.1.orig/arch/mips/pci/Makefile 2009-04-02 22:55:27.000000000 +0200
++++ linux-2.6.29.1/arch/mips/pci/Makefile 2009-04-13 14:27:34.691076784 +0200
+@@ -16,6 +16,7 @@
+ obj-$(CONFIG_NEC_MARKEINS) += ops-emma2rh.o pci-emma2rh.o fixup-emma2rh.o
+ obj-$(CONFIG_PCI_TX4927) += ops-tx4927.o
+ obj-$(CONFIG_BCM47XX) += pci-bcm47xx.o
++obj-$(CONFIG_ATHEROS_AR71XX) += pci-ar71xx.o
+
+ #
+ # These are still pretty much in the old state, watch, go blind.
+diff -Nur linux-2.6.29.1.orig/arch/mips/pci/pci-ar71xx.c linux-2.6.29.1/arch/mips/pci/pci-ar71xx.c
+--- linux-2.6.29.1.orig/arch/mips/pci/pci-ar71xx.c 1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.29.1/arch/mips/pci/pci-ar71xx.c 2009-04-13 14:27:34.695077573 +0200
+@@ -0,0 +1,347 @@
++/*
++ * Atheros AR71xx PCI host controller driver
++ *
++ * Copyright (C) 2008 Gabor Juhos <juhosg@openwrt.org>
++ * Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org>
++ *
++ * Parts of this file are based on Atheros' 2.6.15 BSP
++ *
++ * This program is free software; you can redistribute it and/or modify it
++ * under the terms of the GNU General Public License version 2 as published
++ * by the Free Software Foundation.
++ */
++
++#include <linux/resource.h>
++#include <linux/types.h>
++#include <linux/delay.h>
++#include <linux/bitops.h>
++#include <linux/pci.h>
++#include <linux/pci_regs.h>
++
++#include <asm/mach-ar71xx/ar71xx.h>
++#include <asm/mach-ar71xx/pci.h>
++
++#undef DEBUG
++#ifdef DEBUG
++#define DBG(fmt, args...) printk(KERN_DEBUG fmt, ## args)
++#else
++#define DBG(fmt, args...)
++#endif
++
++#define AR71XX_PCI_DELAY 100 /* msecs */
++
++#if 0
++#define PCI_IDSEL_BASE PCI_IDSEL_ADL_START
++#else
++#define PCI_IDSEL_BASE 0
++#endif
++
++static unsigned ar71xx_pci_nr_irqs;
++static struct ar71xx_pci_irq *ar71xx_pci_irq_map __initdata;
++static void __iomem *ar71xx_pcicfg_base;
++
++static DEFINE_SPINLOCK(ar71xx_pci_lock);
++
++static inline void ar71xx_pci_delay(void)
++{
++ mdelay(AR71XX_PCI_DELAY);
++}
++
++static inline u32 ar71xx_pcicfg_rr(unsigned int reg)
++{
++ return __raw_readl(ar71xx_pcicfg_base + reg);
++}
++
++static inline void ar71xx_pcicfg_wr(unsigned int reg, u32 val)
++{
++ __raw_writel(val, ar71xx_pcicfg_base + reg);
++}
++
++/* Byte lane enable bits */
++static u8 ble_table[4][4] = {
++ {0x0, 0xf, 0xf, 0xf},
++ {0xe, 0xd, 0xb, 0x7},
++ {0xc, 0xf, 0x3, 0xf},
++ {0xf, 0xf, 0xf, 0xf},
++};
++
++static inline u32 ar71xx_pci_get_ble(int where, int size, int local)
++{
++ u32 t;
++
++ t = ble_table[size & 3][where & 3];
++ BUG_ON(t == 0xf);
++ t <<= (local) ? 20 : 4;
++ return t;
++}
++
++static inline u32 ar71xx_pci_bus_addr(struct pci_bus *bus, unsigned int devfn,
++ int where)
++{
++ u32 ret;
++
++ if (!bus->number) {
++ /* type 0 */
++ ret = (1 << (PCI_IDSEL_BASE + PCI_SLOT(devfn)))
++ | (PCI_FUNC(devfn) << 8) | (where & ~3);
++ } else {
++ /* type 1 */
++ ret = (bus->number << 16) | (PCI_SLOT(devfn) << 11)
++ | (PCI_FUNC(devfn) << 8) | (where & ~3) | 1;
++ }
++
++ return ret;
++}
++
++static int __ar71xx_pci_be_handler(int is_fixup)
++{
++ u32 pci_err;
++ u32 ahb_err;
++
++ pci_err = ar71xx_pcicfg_rr(PCI_REG_PCI_ERR) & 3;
++ if (pci_err) {
++ if (!is_fixup)
++ printk(KERN_ALERT "PCI error %d at PCI addr 0x%x\n",
++ pci_err,
++ ar71xx_pcicfg_rr(PCI_REG_PCI_ERR_ADDR));
++
++ ar71xx_pcicfg_wr(PCI_REG_PCI_ERR, pci_err);
++ }
++
++ ahb_err = ar71xx_pcicfg_rr(PCI_REG_AHB_ERR) & 1;
++ if (ahb_err) {
++ if (!is_fixup)
++ printk(KERN_ALERT "AHB error at AHB address 0x%x\n",
++ ar71xx_pcicfg_rr(PCI_REG_AHB_ERR_ADDR));
++
++ ar71xx_pcicfg_wr(PCI_REG_AHB_ERR, ahb_err);
++ }
++
++ return ((ahb_err | pci_err) ? 1 : 0);
++}
++
++static inline int ar71xx_pci_set_cfgaddr(struct pci_bus *bus,
++ unsigned int devfn, int where, int size, u32 cmd)
++{
++ u32 addr;
++
++ addr = ar71xx_pci_bus_addr(bus, devfn, where);
++
++ DBG("PCI: set cfgaddr: %02x:%02x.%01x/%02x:%01d, addr=%08x\n",
++ bus->number, PCI_SLOT(devfn), PCI_FUNC(devfn),
++ where, size, addr);
++
++ ar71xx_pcicfg_wr(PCI_REG_CFG_AD, addr);
++ ar71xx_pcicfg_wr(PCI_REG_CFG_CBE,
++ cmd | ar71xx_pci_get_ble(where, size, 0));
++
++ return __ar71xx_pci_be_handler(1);
++}
++
++static int ar71xx_pci_read_config(struct pci_bus *bus, unsigned int devfn,
++ int where, int size, u32 *value)
++{
++ static u32 mask[8] = {0, 0xff, 0xffff, 0, 0xffffffff, 0, 0, 0};
++ unsigned long flags;
++ u32 data;
++ int ret;
++
++ ret = PCIBIOS_SUCCESSFUL;
++
++ DBG("PCI: read config: %02x:%02x.%01x/%02x:%01d\n", bus->number,
++ PCI_SLOT(devfn), PCI_FUNC(devfn), where, size);
++
++ spin_lock_irqsave(&ar71xx_pci_lock, flags);
++
++ if (bus->number == 0 && devfn == 0) {
++ u32 t;
++
++ t = PCI_CRP_CMD_READ | (where & ~3);
++
++ ar71xx_pcicfg_wr(PCI_REG_CRP_AD_CBE, t);
++ data = ar71xx_pcicfg_rr(PCI_REG_CRP_RDDATA);
++
++ DBG("PCI: rd local cfg, ad_cbe:%08x, data:%08x\n", t, data);
++
++ } else {
++ int err;
++
++ err = ar71xx_pci_set_cfgaddr(bus, devfn, where, size,
++ PCI_CFG_CMD_READ);
++
++ if (err == 0) {
++ data = ar71xx_pcicfg_rr(PCI_REG_CFG_RDDATA);
++ } else {
++ ret = PCIBIOS_DEVICE_NOT_FOUND;
++ data = ~0;
++ }
++ }
++
++ spin_unlock_irqrestore(&ar71xx_pci_lock, flags);
++
++ DBG("PCI: read config: data=%08x raw=%08x\n",
++ (data >> (8 * (where & 3))) & mask[size & 7], data);
++
++ *value = (data >> (8 * (where & 3))) & mask[size & 7];
++
++ return ret;
++}
++
++static int ar71xx_pci_write_config(struct pci_bus *bus, unsigned int devfn,
++ int where, int size, u32 value)
++{
++ unsigned long flags;
++ int ret;
++
++ DBG("PCI: write config: %02x:%02x.%01x/%02x:%01d value=%08x\n",
++ bus->number, PCI_SLOT(devfn), PCI_FUNC(devfn),
++ where, size, value);
++
++ value = value << (8 * (where & 3));
++ ret = PCIBIOS_SUCCESSFUL;
++
++ spin_lock_irqsave(&ar71xx_pci_lock, flags);
++ if (bus->number == 0 && devfn == 0) {
++ u32 t;
++
++ t = PCI_CRP_CMD_WRITE | (where & ~3);
++ t |= ar71xx_pci_get_ble(where, size, 1);
++
++ DBG("PCI: wr local cfg, ad_cbe:%08x, value:%08x\n", t, value);
++
++ ar71xx_pcicfg_wr(PCI_REG_CRP_AD_CBE, t);
++ ar71xx_pcicfg_wr(PCI_REG_CRP_WRDATA, value);
++ } else {
++ int err;
++
++ err = ar71xx_pci_set_cfgaddr(bus, devfn, where, size,
++ PCI_CFG_CMD_WRITE);
++
++ if (err == 0)
++ ar71xx_pcicfg_wr(PCI_REG_CFG_WRDATA, value);
++ else
++ ret = PCIBIOS_DEVICE_NOT_FOUND;
++ }
++ spin_unlock_irqrestore(&ar71xx_pci_lock, flags);
++
++ return ret;
++}
++
++static void ar71xx_pci_fixup(struct pci_dev *dev)
++{
++ u32 t;
++
++ if (dev->bus->number != 0 || dev->devfn != 0)
++ return;
++
++ DBG("PCI: fixup host controller %s (%04x:%04x)\n", pci_name(dev),
++ dev->vendor, dev->device);
++
++ /* setup COMMAND register */
++ t = PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER | PCI_COMMAND_INVALIDATE
++ | PCI_COMMAND_PARITY | PCI_COMMAND_SERR | PCI_COMMAND_FAST_BACK;
++
++ pci_write_config_word(dev, PCI_COMMAND, t);
++}
++
++DECLARE_PCI_FIXUP_EARLY(PCI_ANY_ID, PCI_ANY_ID, ar71xx_pci_fixup);
++
++int __init pcibios_map_irq(const struct pci_dev *dev, uint8_t slot, uint8_t pin)
++{
++ int irq = -1;
++ int i;
++
++ slot -= PCI_IDSEL_ADL_START - PCI_IDSEL_BASE;
++
++ for (i = 0; i < ar71xx_pci_nr_irqs; i++) {
++ struct ar71xx_pci_irq *entry;
++
++ entry = &ar71xx_pci_irq_map[i];
++ if (entry->slot == slot && entry->pin == pin) {
++ irq = entry->irq;
++ break;
++ }
++ }
++
++ if (irq < 0) {
++ printk(KERN_ALERT "PCI: no irq found for pin%u@%s\n",
++ pin, pci_name((struct pci_dev *)dev));
++ } else {
++ printk(KERN_INFO "PCI: mapping irq %d to pin%u@%s\n",
++ irq, pin, pci_name((struct pci_dev *)dev));
++ }
++
++ return irq;
++}
++
++int pcibios_plat_dev_init(struct pci_dev *dev)
++{
++ return 0;
++}
++
++static struct pci_ops ar71xx_pci_ops = {
++ .read = ar71xx_pci_read_config,
++ .write = ar71xx_pci_write_config,
++};
++
++static struct resource ar71xx_pci_io_resource = {
++ .name = "PCI IO space",
++ .start = 0,
++ .end = 0,
++ .flags = IORESOURCE_IO,
++};
++
++static struct resource ar71xx_pci_mem_resource = {
++ .name = "PCI memory space",
++ .start = AR71XX_PCI_MEM_BASE,
++ .end = AR71XX_PCI_MEM_BASE + AR71XX_PCI_MEM_SIZE - 1,
++ .flags = IORESOURCE_MEM
++};
++
++static struct pci_controller ar71xx_pci_controller = {
++ .pci_ops = &ar71xx_pci_ops,
++ .mem_resource = &ar71xx_pci_mem_resource,
++ .io_resource = &ar71xx_pci_io_resource,
++};
++
++static int __init __ar71xx_pci_bios_init(unsigned nr_irqs,
++ struct ar71xx_pci_irq *map)
++{
++ ar71xx_device_stop(RESET_MODULE_PCI_BUS | RESET_MODULE_PCI_CORE);
++ ar71xx_pci_delay();
++
++ ar71xx_device_start(RESET_MODULE_PCI_BUS | RESET_MODULE_PCI_CORE);
++ ar71xx_pci_delay();
++
++ ar71xx_pcicfg_base = ioremap_nocache(AR71XX_PCI_CFG_BASE,
++ AR71XX_PCI_CFG_SIZE);
++
++ ar71xx_ddr_wr(AR71XX_DDR_REG_PCI_WIN0, PCI_WIN0_OFFS);
++ ar71xx_ddr_wr(AR71XX_DDR_REG_PCI_WIN1, PCI_WIN1_OFFS);
++ ar71xx_ddr_wr(AR71XX_DDR_REG_PCI_WIN2, PCI_WIN2_OFFS);
++ ar71xx_ddr_wr(AR71XX_DDR_REG_PCI_WIN3, PCI_WIN3_OFFS);
++ ar71xx_ddr_wr(AR71XX_DDR_REG_PCI_WIN4, PCI_WIN4_OFFS);
++ ar71xx_ddr_wr(AR71XX_DDR_REG_PCI_WIN5, PCI_WIN5_OFFS);
++ ar71xx_ddr_wr(AR71XX_DDR_REG_PCI_WIN6, PCI_WIN6_OFFS);
++ ar71xx_ddr_wr(AR71XX_DDR_REG_PCI_WIN7, PCI_WIN7_OFFS);
++
++ ar71xx_pci_delay();
++
++ /* clear bus errors */
++ (void)__ar71xx_pci_be_handler(1);
++
++ ar71xx_pci_nr_irqs = nr_irqs;
++ ar71xx_pci_irq_map = map;
++ ar71xx_pci_be_handler = __ar71xx_pci_be_handler;
++
++ register_pci_controller(&ar71xx_pci_controller);
++
++ return 0;
++}
++
++static int __init __ar71xx_pci_init(void)
++{
++ ar71xx_pci_bios_init = __ar71xx_pci_bios_init;
++ return 0;
++}
++pure_initcall(__ar71xx_pci_init);
+diff -Nur linux-2.6.29.1.orig/drivers/input/misc/Kconfig linux-2.6.29.1/drivers/input/misc/Kconfig
+--- linux-2.6.29.1.orig/drivers/input/misc/Kconfig 2009-04-02 22:55:27.000000000 +0200
++++ linux-2.6.29.1/drivers/input/misc/Kconfig 2009-04-13 14:27:34.723078345 +0200
+@@ -227,4 +227,20 @@
+ Say Y to include support for delivering PMU events via input
+ layer on NXP PCF50633.
+
++config INPUT_GPIO_BUTTONS
++ tristate "Polled GPIO buttons interface"
++ depends on GENERIC_GPIO
++ select INPUT_POLLDEV
++ help
++ This driver implements support for buttons connected
++ to GPIO pins of various CPUs (and some other chips).
++
++ Say Y here if your device has buttons connected
++ directly to such GPIO pins. Your board-specific
++ setup logic must also provide a platform device,
++ with configuration data saying which GPIOs are used.
++
++ To compile this driver as a module, choose M here: the
++ module will be called gpio-buttons.
++
+ endif
+diff -Nur linux-2.6.29.1.orig/drivers/input/misc/Makefile linux-2.6.29.1/drivers/input/misc/Makefile
+--- linux-2.6.29.1.orig/drivers/input/misc/Makefile 2009-04-02 22:55:27.000000000 +0200
++++ linux-2.6.29.1/drivers/input/misc/Makefile 2009-04-13 14:29:03.564632184 +0200
+@@ -22,3 +22,4 @@
+ obj-$(CONFIG_INPUT_APANEL) += apanel.o
+ obj-$(CONFIG_INPUT_SGI_BTNS) += sgi_btns.o
+ obj-$(CONFIG_INPUT_PCF50633_PMU) += pcf50633-input.o
++obj-$(CONFIG_INPUT_GPIO_BUTTONS) += gpio_buttons.o
+diff -Nur linux-2.6.29.1.orig/drivers/input/misc/gpio_buttons.c linux-2.6.29.1/drivers/input/misc/gpio_buttons.c
+--- linux-2.6.29.1.orig/drivers/input/misc/gpio_buttons.c 1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.29.1/drivers/input/misc/gpio_buttons.c 2009-04-13 14:27:34.727079413 +0200
+@@ -0,0 +1,209 @@
++/*
++ * Driver for buttons on GPIO lines not capable of generating interrupts
++ *
++ * Copyright (C) 2007,2008 Gabor Juhos <juhosg at openwrt.org>
++ *
++ * This file was based on: /drivers/input/misc/cobalt_btns.c
++ * Copyright (C) 2007 Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>
++ *
++ * also was based on: /drivers/input/keyboard/gpio_keys.c
++ * Copyright 2005 Phil Blundell
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License version 2 as
++ * published by the Free Software Foundation.
++ *
++ */
++
++#include <linux/kernel.h>
++#include <linux/module.h>
++#include <linux/init.h>
++
++#include <linux/input.h>
++#include <linux/input-polldev.h>
++#include <linux/ioport.h>
++#include <linux/platform_device.h>
++
++#include <linux/gpio_buttons.h>
++
++#include <asm/gpio.h>
++
++#define DRV_NAME "gpio-buttons"
++#define DRV_VERSION "0.1.1"
++#define PFX DRV_NAME ": "
++
++struct gpio_buttons_dev {
++ struct input_polled_dev *poll_dev;
++ struct gpio_buttons_platform_data *pdata;
++};
++
++static void gpio_buttons_poll(struct input_polled_dev *dev)
++{
++ struct gpio_buttons_dev *bdev = dev->private;
++ struct gpio_buttons_platform_data *pdata = bdev->pdata;
++ struct input_dev *input = dev->input;
++ int i;
++
++ for (i = 0; i < bdev->pdata->nbuttons; i++) {
++ struct gpio_button *button = &pdata->buttons[i];
++ unsigned int type = button->type ?: EV_KEY;
++ int state;
++
++ state = gpio_get_value(button->gpio) ? 1 : 0;
++ state ^= button->active_low;
++
++ if (state) {
++ button->count++;
++ } else {
++ if (button->count >= button->threshold) {
++ input_event(input, type, button->code, 1);
++ input_sync(input);
++ }
++ button->count = 0;
++ }
++
++ if (button->count == button->threshold) {
++ input_event(input, type, button->code, 0);
++ input_sync(input);
++ }
++ }
++}
++
++static int __devinit gpio_buttons_probe(struct platform_device *pdev)
++{
++ struct gpio_buttons_platform_data *pdata = pdev->dev.platform_data;
++ struct gpio_buttons_dev *bdev;
++ struct input_polled_dev *poll_dev;
++ struct input_dev *input;
++ int error, i;
++
++
++ if (!pdata)
++ return -ENXIO;
++
++ bdev = kzalloc(sizeof(*bdev), GFP_KERNEL);
++ if (!bdev) {
++ printk(KERN_ERR DRV_NAME "no memory for device\n");
++ return -ENOMEM;
++ }
++
++ poll_dev = input_allocate_polled_device();
++ if (!poll_dev) {
++ printk(KERN_ERR DRV_NAME "no memory for polled device\n");
++ error = -ENOMEM;
++ goto err_free_bdev;
++ }
++
++ poll_dev->private = bdev;
++ poll_dev->poll = gpio_buttons_poll;
++ poll_dev->poll_interval = pdata->poll_interval;
++
++ input = poll_dev->input;
++
++ input->evbit[0] = BIT(EV_KEY);
++ input->name = pdev->name;
++ input->phys = "gpio-buttons/input0";
++ input->dev.parent = &pdev->dev;
++
++ input->id.bustype = BUS_HOST;
++ input->id.vendor = 0x0001;
++ input->id.product = 0x0001;
++ input->id.version = 0x0100;
++
++ for (i = 0; i < pdata->nbuttons; i++) {
++ struct gpio_button *button = &pdata->buttons[i];
++ unsigned int gpio = button->gpio;
++ unsigned int type = button->type ?: EV_KEY;
++
++ error = gpio_request(gpio, button->desc ?
++ button->desc : DRV_NAME);
++ if (error) {
++ printk(KERN_ERR PFX "unable to claim gpio %u, "
++ "error %d\n", gpio, error);
++ goto err_free_gpio;
++ }
++
++ error = gpio_direction_input(gpio);
++ if (error) {
++ printk(KERN_ERR PFX "unable to set direction on "
++ "gpio %u, error %d\n", gpio, error);
++ goto err_free_gpio;
++ }
++
++ input_set_capability(input, type, button->code);
++ button->count = 0;
++ }
++
++ bdev->poll_dev = poll_dev;
++ bdev->pdata = pdata;
++ platform_set_drvdata(pdev, bdev);
++
++ error = input_register_polled_device(poll_dev);
++ if (error) {
++ printk(KERN_ERR PFX "unable to register polled device, "
++ "error %d\n", error);
++ goto err_free_gpio;
++ }
++
++ return 0;
++
++err_free_gpio:
++ for (i = i - 1; i >= 0; i--)
++ gpio_free(pdata->buttons[i].gpio);
++
++ input_free_polled_device(poll_dev);
++
++err_free_bdev:
++ kfree(bdev);
++
++ platform_set_drvdata(pdev, NULL);
++ return error;
++}
++
++static int __devexit gpio_buttons_remove(struct platform_device *pdev)
++{
++ struct gpio_buttons_dev *bdev = platform_get_drvdata(pdev);
++ struct gpio_buttons_platform_data *pdata = bdev->pdata;
++ int i;
++
++ input_unregister_polled_device(bdev->poll_dev);
++
++ for (i = 0; i < pdata->nbuttons; i++)
++ gpio_free(pdata->buttons[i].gpio);
++
++ input_free_polled_device(bdev->poll_dev);
++
++ kfree(bdev);
++ platform_set_drvdata(pdev, NULL);
++
++ return 0;
++}
++
++static struct platform_driver gpio_buttons_driver = {
++ .probe = gpio_buttons_probe,
++ .remove = __devexit_p(gpio_buttons_remove),
++ .driver = {
++ .name = DRV_NAME,
++ .owner = THIS_MODULE,
++ },
++};
++
++static int __init gpio_buttons_init(void)
++{
++ printk(KERN_INFO DRV_NAME " driver version " DRV_VERSION "\n");
++ return platform_driver_register(&gpio_buttons_driver);
++}
++
++static void __exit gpio_buttons_exit(void)
++{
++ platform_driver_unregister(&gpio_buttons_driver);
++}
++
++module_init(gpio_buttons_init);
++module_exit(gpio_buttons_exit);
++
++MODULE_LICENSE("GPL");
++MODULE_AUTHOR("Gabor Juhos <juhosg at openwrt.org>");
++MODULE_VERSION(DRV_VERSION);
++MODULE_DESCRIPTION("Polled buttons driver for CPU GPIOs");
++
+diff -Nur linux-2.6.29.1.orig/drivers/mtd/nand/Kconfig linux-2.6.29.1/drivers/mtd/nand/Kconfig
+--- linux-2.6.29.1.orig/drivers/mtd/nand/Kconfig 2009-04-02 22:55:27.000000000 +0200
++++ linux-2.6.29.1/drivers/mtd/nand/Kconfig 2009-04-13 14:27:34.731079923 +0200
+@@ -427,4 +427,8 @@
+ Several Renesas SuperH CPU has FLCTL. This option enables support
+ for NAND Flash using FLCTL. This driver support SH7723.
+
++config MTD_NAND_RB4XX
++ tristate "NAND flash driver for RouterBoard 4xx series"
++ depends on MTD_NAND && ATHEROS_AR71XX
++
+ endif # MTD_NAND
+diff -Nur linux-2.6.29.1.orig/drivers/mtd/nand/Makefile linux-2.6.29.1/drivers/mtd/nand/Makefile
+--- linux-2.6.29.1.orig/drivers/mtd/nand/Makefile 2009-04-02 22:55:27.000000000 +0200
++++ linux-2.6.29.1/drivers/mtd/nand/Makefile 2009-04-13 14:27:34.731079923 +0200
+@@ -29,6 +29,7 @@
+ obj-$(CONFIG_MTD_NAND_PXA3xx) += pxa3xx_nand.o
+ obj-$(CONFIG_MTD_NAND_TMIO) += tmio_nand.o
+ obj-$(CONFIG_MTD_NAND_PLATFORM) += plat_nand.o
++obj-$(CONFIG_MTD_NAND_RB4XX) += rb4xx_nand.o
+ obj-$(CONFIG_MTD_ALAUDA) += alauda.o
+ obj-$(CONFIG_MTD_NAND_PASEMI) += pasemi_nand.o
+ obj-$(CONFIG_MTD_NAND_ORION) += orion_nand.o
+diff -Nur linux-2.6.29.1.orig/drivers/mtd/nand/rb4xx_nand.c linux-2.6.29.1/drivers/mtd/nand/rb4xx_nand.c
+--- linux-2.6.29.1.orig/drivers/mtd/nand/rb4xx_nand.c 1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.29.1/drivers/mtd/nand/rb4xx_nand.c 2009-04-13 14:27:34.735080153 +0200
+@@ -0,0 +1,507 @@
++/*
++ * NAND flash driver for the MikroTik RouterBoard 4xx series
++ *
++ * Copyright (C) 2008 Gabor Juhos <juhosg@openwrt.org>
++ * Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org>
++ *
++ * This file was based on the driver for Linux 2.6.22 published by
++ * MikroTik for their RouterBoard 4xx series devices.
++ *
++ * This program is free software; you can redistribute it and/or modify it
++ * under the terms of the GNU General Public License version 2 as published
++ * by the Free Software Foundation.
++ */
++
++#include <linux/init.h>
++#include <linux/mtd/nand.h>
++#include <linux/mtd/mtd.h>
++#include <linux/mtd/partitions.h>
++#include <linux/platform_device.h>
++#include <linux/delay.h>
++#include <linux/io.h>
++#include <linux/gpio.h>
++
++#include <asm/mach-ar71xx/ar71xx.h>
++
++#define DRV_NAME "rb4xx-nand"
++#define DRV_VERSION "0.1.10"
++#define DRV_DESC "NAND flash driver for RouterBoard 4xx series"
++
++#define USE_FAST_READ 1
++#define USE_FAST_WRITE 1
++#undef RB4XX_NAND_DEBUG
++
++#ifdef RB4XX_NAND_DEBUG
++#define DBG(fmt, arg...) printk(KERN_DEBUG DRV_NAME ": " fmt, ## arg)
++#else
++#define DBG(fmt, arg...) do {} while (0)
++#endif
++
++#define RB4XX_NAND_GPIO_RDY 5
++#define RB4XX_FLASH_HZ 33333334
++#define RB4XX_NAND_HZ 33333334
++
++#define SPI_CTRL_FASTEST 0x40
++#define SPI_CTRL_SAFE 0x43 /* 25 MHz for AHB 200 MHz */
++#define SBIT_IOC_BASE SPI_IOC_CS1
++#define SBIT_IOC_DO_SHIFT 0
++#define SBIT_IOC_DO (1u << SBIT_IOC_DO_SHIFT)
++#define SBIT_IOC_DO2_SHIFT 18
++#define SBIT_IOC_DO2 (1u << SBIT_IOC_DO2_SHIFT)
++
++#define CPLD_CMD_WRITE_MULT 0x08 /* send cmd, n x send data, read data */
++#define CPLD_CMD_WRITE_CFG 0x09 /* send cmd, n x send cfg */
++#define CPLD_CMD_READ_MULT 0x0a /* send cmd, send idle, n x read data */
++#define CPLD_CMD_READ_FAST 0x0b /* send cmd, 4 x idle, n x read data */
++
++#define CFG_BIT_nCE 0x80
++#define CFG_BIT_CLE 0x40
++#define CFG_BIT_ALE 0x20
++#define CFG_BIT_FAN 0x10
++#define CFG_BIT_nLED4 0x08
++#define CFG_BIT_nLED3 0x04
++#define CFG_BIT_nLED2 0x02
++#define CFG_BIT_nLED1 0x01
++
++#define CFG_BIT_nLEDS \
++ (CFG_BIT_nLED1 | CFG_BIT_nLED2 | CFG_BIT_nLED3 | CFG_BIT_nLED4)
++
++struct rb4xx_nand_info {
++ struct nand_chip chip;
++ struct mtd_info mtd;
++};
++
++/*
++ * We need to use the OLD Yaffs-1 OOB layout, otherwise the RB bootloader
++ * will not be able to find the kernel that we load.
++ */
++static struct nand_ecclayout rb4xx_nand_ecclayout = {
++ .eccbytes = 6,
++ .eccpos = { 8, 9, 10, 13, 14, 15 },
++ .oobavail = 9,
++ .oobfree = { { 0, 4 }, { 6, 2 }, { 11, 2 }, { 4, 1 } }
++};
++
++static struct mtd_partition rb4xx_nand_partitions[] = {
++ {
++ .name = "booter",
++ .offset = 0,
++ .size = (256 * 1024),
++ .mask_flags = MTD_WRITEABLE,
++ },
++ {
++ .name = "kernel",
++ .offset = (256 * 1024),
++ .size = (4 * 1024 * 1024) - (256 * 1024),
++ },
++ {
++ .name = "rootfs",
++ .offset = MTDPART_OFS_NXTBLK,
++ .size = MTDPART_SIZ_FULL,
++ },
++};
++
++#if USE_FAST_READ
++#define SPI_NDATA_BASE 0x00800000
++static unsigned spi_ctrl_fread = SPI_CTRL_SAFE;
++static unsigned spi_ctrl_flash = SPI_CTRL_SAFE;
++extern unsigned mips_hpt_frequency;
++#endif
++
++static inline unsigned rb4xx_spi_rreg(unsigned r)
++{
++ return __raw_readl((void * __iomem)(KSEG1ADDR(AR71XX_SPI_BASE) + r));
++}
++
++static inline void rb4xx_spi_wreg(unsigned r, unsigned v)
++{
++ __raw_writel(v, (void * __iomem)(KSEG1ADDR(AR71XX_SPI_BASE) + r));
++}
++
++static inline void do_spi_clk(int bit)
++{
++ unsigned bval = SBIT_IOC_BASE | (bit & 1);
++
++ rb4xx_spi_wreg(SPI_REG_IOC, bval);
++ rb4xx_spi_wreg(SPI_REG_IOC, bval | SPI_IOC_CLK);
++}
++
++static void do_spi_byte(uint8_t byte)
++{
++ do_spi_clk(byte >> 7);
++ do_spi_clk(byte >> 6);
++ do_spi_clk(byte >> 5);
++ do_spi_clk(byte >> 4);
++ do_spi_clk(byte >> 3);
++ do_spi_clk(byte >> 2);
++ do_spi_clk(byte >> 1);
++ do_spi_clk(byte);
++
++ DBG("spi_byte sent 0x%02x got 0x%x\n",
++ byte, rb4xx_spi_rreg(SPI_REG_RDS));
++}
++
++#if USE_FAST_WRITE
++static inline void do_spi_clk_fast(int bit1, int bit2)
++{
++ unsigned bval = (SBIT_IOC_BASE |
++ ((bit1 << SBIT_IOC_DO_SHIFT) & SBIT_IOC_DO) |
++ ((bit2 << SBIT_IOC_DO2_SHIFT) & SBIT_IOC_DO2));
++
++ rb4xx_spi_wreg(SPI_REG_IOC, bval);
++ rb4xx_spi_wreg(SPI_REG_IOC, bval | SPI_IOC_CLK);
++}
++
++static inline void do_spi_byte_fast(uint8_t byte)
++{
++ do_spi_clk_fast(byte >> 7, byte >> 6);
++ do_spi_clk_fast(byte >> 5, byte >> 4);
++ do_spi_clk_fast(byte >> 3, byte >> 2);
++ do_spi_clk_fast(byte >> 1, byte >> 0);
++
++ DBG("spi_byte_fast sent 0x%02x got 0x%x\n",
++ byte, rb4xx_spi_rreg(SPI_REG_RDS));
++}
++#else
++static inline void do_spi_byte_fast(uint8_t byte)
++{
++ do_spi_byte(byte);
++}
++#endif /* USE_FAST_WRITE */
++
++static int do_spi_cmd(unsigned cmd, unsigned sendCnt, const uint8_t *sendData,
++ unsigned recvCnt, uint8_t *recvData,
++ const uint8_t *verifyData, int fastWrite)
++{
++ unsigned i;
++
++ DBG("SPI cmd 0x%x send %u recv %u\n", cmd, sendCnt, recvCnt);
++
++ rb4xx_spi_wreg(SPI_REG_FS, SPI_FS_GPIO);
++ rb4xx_spi_wreg(SPI_REG_CTRL, SPI_CTRL_FASTEST);
++
++ do_spi_byte(cmd);
++#if 0
++ if (cmd == CPLD_CMD_READ_FAST) {
++ do_spi_byte(0x80);
++ do_spi_byte(0);
++ do_spi_byte(0);
++ }
++#endif
++ for (i = 0; i < sendCnt; ++i) {
++ if (fastWrite)
++ do_spi_byte_fast(sendData[i]);
++ else
++ do_spi_byte(sendData[i]);
++ }
++
++ for (i = 0; i < recvCnt; ++i) {
++ if (fastWrite)
++ do_spi_byte_fast(0);
++ else
++ do_spi_byte(0);
++
++ if (recvData) {
++ recvData[i] = rb4xx_spi_rreg(SPI_REG_RDS) & 0xff;
++ } else if (verifyData) {
++ if (verifyData[i] != (rb4xx_spi_rreg(SPI_REG_RDS)
++ & 0xff))
++ break;
++ }
++ }
++
++ rb4xx_spi_wreg(SPI_REG_IOC, SBIT_IOC_BASE | SPI_IOC_CS0);
++ rb4xx_spi_wreg(SPI_REG_CTRL, spi_ctrl_flash);
++ rb4xx_spi_wreg(SPI_REG_FS, 0);
++
++ return i == recvCnt;
++}
++
++static int got_write = 1;
++
++static void rb4xx_nand_write_data(const uint8_t *byte, unsigned cnt)
++{
++ do_spi_cmd(CPLD_CMD_WRITE_MULT, cnt, byte, 1, NULL, NULL, 1);
++ got_write = 1;
++}
++
++static void rb4xx_nand_write_byte(uint8_t byte)
++{
++ rb4xx_nand_write_data(&byte, 1);
++}
++
++#if USE_FAST_READ
++static uint8_t *rb4xx_nand_read_getaddr(unsigned cnt)
++{
++ static unsigned nboffset = 0x100000;
++ unsigned addr;
++
++ if (got_write) {
++ nboffset = (nboffset + 31) & ~31;
++ if (nboffset >= 0x100000) /* 1MB */
++ nboffset = 0;
++
++ got_write = 0;
++ rb4xx_spi_wreg(SPI_REG_FS, SPI_FS_GPIO);
++ rb4xx_spi_wreg(SPI_REG_CTRL, spi_ctrl_fread);
++ rb4xx_spi_wreg(SPI_REG_FS, 0);
++ }
++
++ addr = KSEG1ADDR(AR71XX_SPI_BASE + SPI_NDATA_BASE) + nboffset;
++ DBG("rb4xx_nand_read_getaddr 0x%x cnt 0x%x\n", addr, cnt);
++
++ nboffset += cnt;
++ return (uint8_t *)addr;
++}
++
++static void rb4xx_nand_read_data(uint8_t *buf, unsigned cnt)
++{
++ unsigned size32 = cnt & ~31;
++ unsigned remain = cnt & 31;
++
++ if (size32) {
++ uint8_t *addr = rb4xx_nand_read_getaddr(size32);
++ memcpy(buf, (void *)addr, size32);
++ }
++
++ if (remain) {
++ do_spi_cmd(CPLD_CMD_READ_MULT, 1, buf, remain,
++ buf + size32, NULL, 0);
++ }
++}
++
++static int rb4xx_nand_verify_data(const uint8_t *buf, unsigned cnt)
++{
++ unsigned size32 = cnt & ~31;
++ unsigned remain = cnt & 31;
++
++ if (size32) {
++ uint8_t *addr = rb4xx_nand_read_getaddr(size32);
++ if (memcmp(buf, (void *)addr, size32) != 0)
++ return 0;
++ }
++
++ if (remain) {
++ return do_spi_cmd(CPLD_CMD_READ_MULT, 1, buf, remain,
++ NULL, buf + size32, 0);
++ }
++ return 1;
++}
++#else /* USE_FAST_READ */
++static void rb4xx_nand_read_data(uint8_t *buf, unsigned cnt)
++{
++ do_spi_cmd(CPLD_CMD_READ_MULT, 1, buf, cnt, buf, NULL, 0);
++}
++
++static int rb4xx_nand_verify_data(const uint8_t *buf, unsigned cnt)
++{
++ return do_spi_cmd(CPLD_CMD_READ_MULT, 1, buf, cnt, NULL, buf, 0);
++}
++#endif /* USE_FAST_READ */
++
++static void rb4xx_nand_write_cfg(uint8_t byte)
++{
++ do_spi_cmd(CPLD_CMD_WRITE_CFG, 1, &byte, 0, NULL, NULL, 0);
++ got_write = 1;
++}
++
++static int rb4xx_nand_dev_ready(struct mtd_info *mtd)
++{
++ return gpio_get_value(RB4XX_NAND_GPIO_RDY);
++}
++
++static void rb4xx_nand_cmd_ctrl(struct mtd_info *mtd, int cmd,
++ unsigned int ctrl)
++{
++ if (ctrl & NAND_CTRL_CHANGE) {
++ uint8_t cfg = CFG_BIT_nLEDS;
++
++ cfg |= (ctrl & NAND_CLE) ? CFG_BIT_CLE : 0;
++ cfg |= (ctrl & NAND_ALE) ? CFG_BIT_ALE : 0;
++ cfg |= (ctrl & NAND_NCE) ? 0 : CFG_BIT_nCE;
++
++ rb4xx_nand_write_cfg(cfg);
++ }
++
++ if (cmd != NAND_CMD_NONE)
++ rb4xx_nand_write_byte(cmd);
++}
++
++static uint8_t rb4xx_nand_read_byte(struct mtd_info *mtd)
++{
++ uint8_t byte = 0;
++
++ rb4xx_nand_read_data(&byte, 1);
++ return byte;
++}
++
++static void rb4xx_nand_write_buf(struct mtd_info *mtd, const uint8_t *buf,
++ int len)
++{
++ rb4xx_nand_write_data(buf, len);
++}
++
++static void rb4xx_nand_read_buf(struct mtd_info *mtd, uint8_t *buf,
++ int len)
++{
++ rb4xx_nand_read_data(buf, len);
++}
++
++static int rb4xx_nand_verify_buf(struct mtd_info *mtd, const uint8_t *buf,
++ int len)
++{
++ if (!rb4xx_nand_verify_data(buf, len))
++ return -EFAULT;
++
++ return 0;
++}
++
++static unsigned get_spi_ctrl(unsigned hz_max, const char *name)
++{
++ unsigned div;
++
++ div = (ar71xx_ahb_freq - 1) / (2 * hz_max);
++ /*
++ * CPU has a bug at (div == 0) - first bit read is random
++ */
++ if (div == 0)
++ ++div;
++
++ if (name) {
++ unsigned ahb_khz = (ar71xx_ahb_freq + 500) / 1000;
++ unsigned div_real = 2 * (div + 1);
++ printk(KERN_INFO "%s SPI clock %u kHz (AHB %u kHz / %u)\n",
++ name,
++ ahb_khz / div_real,
++ ahb_khz, div_real);
++ }
++
++ return SPI_CTRL_FASTEST + div;
++}
++
++static int __init rb4xx_nand_probe(struct platform_device *pdev)
++{
++ struct rb4xx_nand_info *info;
++ int ret;
++
++ printk(KERN_INFO DRV_DESC " version " DRV_VERSION "\n");
++
++ ret = gpio_request(RB4XX_NAND_GPIO_RDY, "NAND RDY");
++ if (ret) {
++ printk(KERN_ERR "rb4xx-nand: gpio request failed\n");
++ return ret;
++ }
++
++ ret = gpio_direction_input(RB4XX_NAND_GPIO_RDY);
++ if (ret) {
++ printk(KERN_ERR "rb4xx-nand: unable to set input mode "
++ "on gpio%d\n", RB4XX_NAND_GPIO_RDY);
++ goto err_free_gpio;
++ }
++
++ info = kzalloc(sizeof(*info), GFP_KERNEL);
++ if (!info) {
++ printk(KERN_ERR "rb4xx-nand: no memory for private data\n");
++ ret = -ENOMEM;
++ goto err_free_gpio;
++ }
++
++#if USE_FAST_READ
++ spi_ctrl_fread = get_spi_ctrl(RB4XX_NAND_HZ, "NAND");
++#endif
++ spi_ctrl_flash = get_spi_ctrl(RB4XX_FLASH_HZ, "FLASH");
++
++ rb4xx_nand_write_cfg(CFG_BIT_nLEDS | CFG_BIT_nCE);
++
++ info->chip.priv = &info;
++ info->mtd.priv = &info->chip;
++ info->mtd.owner = THIS_MODULE;
++
++ info->chip.cmd_ctrl = rb4xx_nand_cmd_ctrl;
++ info->chip.dev_ready = rb4xx_nand_dev_ready;
++ info->chip.read_byte = rb4xx_nand_read_byte;
++ info->chip.write_buf = rb4xx_nand_write_buf;
++ info->chip.read_buf = rb4xx_nand_read_buf;
++ info->chip.verify_buf = rb4xx_nand_verify_buf;
++
++ info->chip.chip_delay = 25;
++ info->chip.ecc.mode = NAND_ECC_SOFT;
++ info->chip.options |= NAND_NO_AUTOINCR;
++
++ platform_set_drvdata(pdev, info);
++
++ ret = nand_scan_ident(&info->mtd, 1);
++ if (ret) {
++ ret = -ENXIO;
++ goto err_free_info;
++ }
++
++ if (info->mtd.writesize == 512)
++ info->chip.ecc.layout = &rb4xx_nand_ecclayout;
++
++ ret = nand_scan_tail(&info->mtd);
++ if (ret) {
++ return -ENXIO;
++ goto err_set_drvdata;
++ }
++
++#ifdef CONFIG_MTD_PARTITIONS
++ ret = add_mtd_partitions(&info->mtd, rb4xx_nand_partitions,
++ ARRAY_SIZE(rb4xx_nand_partitions));
++#else
++ ret = add_mtd_device(&info->mtd);
++#endif
++ if (ret)
++ goto err_release_nand;
++
++ return 0;
++
++err_release_nand:
++ nand_release(&info->mtd);
++err_set_drvdata:
++ platform_set_drvdata(pdev, NULL);
++err_free_info:
++ kfree(info);
++err_free_gpio:
++ gpio_free(RB4XX_NAND_GPIO_RDY);
++ return ret;
++}
++
++static int __devexit rb4xx_nand_remove(struct platform_device *pdev)
++{
++ struct rb4xx_nand_info *info = platform_get_drvdata(pdev);
++
++ nand_release(&info->mtd);
++ platform_set_drvdata(pdev, NULL);
++ kfree(info);
++
++ return 0;
++}
++
++static struct platform_driver rb4xx_nand_driver = {
++ .probe = rb4xx_nand_probe,
++ .remove = __devexit_p(rb4xx_nand_remove),
++ .driver = {
++ .name = DRV_NAME,
++ .owner = THIS_MODULE,
++ },
++};
++
++static int __init rb4xx_nand_init(void)
++{
++ return platform_driver_register(&rb4xx_nand_driver);
++}
++
++static void __exit rb4xx_nand_exit(void)
++{
++ platform_driver_unregister(&rb4xx_nand_driver);
++}
++
++module_init(rb4xx_nand_init);
++module_exit(rb4xx_nand_exit);
++
++MODULE_DESCRIPTION(DRV_DESC);
++MODULE_VERSION(DRV_VERSION);
++MODULE_AUTHOR("Gabor Juhos <juhosg@openwrt.org>");
++MODULE_AUTHOR("Imre Kaloz <kaloz@openwrt.org>");
++MODULE_LICENSE("GPL v2");
+diff -Nur linux-2.6.29.1.orig/drivers/net/Kconfig linux-2.6.29.1/drivers/net/Kconfig
+--- linux-2.6.29.1.orig/drivers/net/Kconfig 2009-04-02 22:55:27.000000000 +0200
++++ linux-2.6.29.1/drivers/net/Kconfig 2009-04-13 14:27:34.763080366 +0200
+@@ -1945,6 +1945,8 @@
+
+ The safe and default value for this is N.
+
++source drivers/net/ag71xx/Kconfig
++
+ config DL2K
+ tristate "DL2000/TC902x-based Gigabit Ethernet support"
+ depends on PCI
+diff -Nur linux-2.6.29.1.orig/drivers/net/Makefile linux-2.6.29.1/drivers/net/Makefile
+--- linux-2.6.29.1.orig/drivers/net/Makefile 2009-04-02 22:55:27.000000000 +0200
++++ linux-2.6.29.1/drivers/net/Makefile 2009-04-13 14:27:34.767081713 +0200
+@@ -2,6 +2,7 @@
+ # Makefile for the Linux network (ethercard) device drivers.
+ #
+
++obj-$(CONFIG_AG71XX) += ag71xx/
+ obj-$(CONFIG_E1000) += e1000/
+ obj-$(CONFIG_E1000E) += e1000e/
+ obj-$(CONFIG_IBM_NEW_EMAC) += ibm_newemac/
+diff -Nur linux-2.6.29.1.orig/drivers/net/ag71xx/Kconfig linux-2.6.29.1/drivers/net/ag71xx/Kconfig
+--- linux-2.6.29.1.orig/drivers/net/ag71xx/Kconfig 1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.29.1/drivers/net/ag71xx/Kconfig 2009-04-13 14:27:34.767081713 +0200
+@@ -0,0 +1,23 @@
++config AG71XX
++ tristate "Atheros AR71xx built-in ethernet mac support"
++ depends on ATHEROS_AR71XX
++ select PHYLIB
++ help
++ If you wish to compile a kernel for AR71xx/91xx and enable
++ ethernet support, then you should always answer Y to this.
++
++config AG71XX_DEBUG
++ bool "Atheros AR71xx built-in ethernet driver debugging"
++ depends on AG71XX
++ default n
++ help
++ Atheros AR71xx built-in ethernet driver debugging messages.
++
++config AG71XX_AR8216_SUPPORT
++ bool "special support for the Atheros AR8216 switch"
++ depends on AG71XX
++ default n
++ default y if AR71XX_MACH_WNR2000 || AR71XX_MACH_MZK_W04NU
++ help
++ Say 'y' here if you want to enable special support for the
++ Atheros AR8216 switch found on some boards.
+diff -Nur linux-2.6.29.1.orig/drivers/net/ag71xx/Makefile linux-2.6.29.1/drivers/net/ag71xx/Makefile
+--- linux-2.6.29.1.orig/drivers/net/ag71xx/Makefile 1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.29.1/drivers/net/ag71xx/Makefile 2009-04-13 14:27:34.771082502 +0200
+@@ -0,0 +1,13 @@
++#
++# Makefile for the Atheros AR71xx built-in ethernet macs
++#
++
++ag71xx-y += ag71xx_main.o
++ag71xx-y += ag71xx_ethtool.o
++ag71xx-y += ag71xx_phy.o
++ag71xx-y += ag71xx_mdio.o
++
++ag71xx-$(CONFIG_AG71XX_AR8216_SUPPORT) += ag71xx_ar8216.o
++
++obj-$(CONFIG_AG71XX) += ag71xx.o
++
+diff -Nur linux-2.6.29.1.orig/drivers/net/ag71xx/ag71xx.h linux-2.6.29.1/drivers/net/ag71xx/ag71xx.h
+--- linux-2.6.29.1.orig/drivers/net/ag71xx/ag71xx.h 1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.29.1/drivers/net/ag71xx/ag71xx.h 2009-04-13 14:27:34.799084111 +0200
+@@ -0,0 +1,449 @@
++/*
++ * Atheros AR71xx built-in ethernet mac driver
++ *
++ * Copyright (C) 2008-2009 Gabor Juhos <juhosg@openwrt.org>
++ * Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org>
++ *
++ * Based on Atheros' AG7100 driver
++ *
++ * This program is free software; you can redistribute it and/or modify it
++ * under the terms of the GNU General Public License version 2 as published
++ * by the Free Software Foundation.
++ */
++
++#ifndef __AG71XX_H
++#define __AG71XX_H
++
++#include <linux/kernel.h>
++#include <linux/version.h>
++#include <linux/module.h>
++#include <linux/init.h>
++#include <linux/types.h>
++#include <linux/random.h>
++#include <linux/spinlock.h>
++#include <linux/interrupt.h>
++#include <linux/platform_device.h>
++#include <linux/ethtool.h>
++#include <linux/etherdevice.h>
++#include <linux/phy.h>
++#include <linux/skbuff.h>
++#include <linux/dma-mapping.h>
++#include <linux/workqueue.h>
++
++#include <linux/bitops.h>
++
++#include <asm/mach-ar71xx/ar71xx.h>
++#include <asm/mach-ar71xx/platform.h>
++
++#define ETH_FCS_LEN 4
++
++#define AG71XX_DRV_NAME "ag71xx"
++#define AG71XX_DRV_VERSION "0.5.21"
++
++#define AG71XX_NAPI_WEIGHT 64
++#define AG71XX_OOM_REFILL (1 + HZ/10)
++
++#define AG71XX_INT_ERR (AG71XX_INT_RX_BE | AG71XX_INT_TX_BE)
++#define AG71XX_INT_TX (AG71XX_INT_TX_PS)
++#define AG71XX_INT_RX (AG71XX_INT_RX_PR | AG71XX_INT_RX_OF)
++
++#define AG71XX_INT_POLL (AG71XX_INT_RX | AG71XX_INT_TX)
++#define AG71XX_INT_INIT (AG71XX_INT_ERR | AG71XX_INT_POLL)
++
++#define AG71XX_TX_FIFO_LEN 2048
++#define AG71XX_TX_MTU_LEN 1536
++#define AG71XX_RX_PKT_RESERVE 64
++#define AG71XX_RX_PKT_SIZE \
++ (AG71XX_RX_PKT_RESERVE + ETH_HLEN + ETH_FRAME_LEN + ETH_FCS_LEN)
++
++#define AG71XX_TX_RING_SIZE 64
++#define AG71XX_TX_THRES_STOP (AG71XX_TX_RING_SIZE - 4)
++#define AG71XX_TX_THRES_WAKEUP \
++ (AG71XX_TX_RING_SIZE - (AG71XX_TX_RING_SIZE / 4))
++
++#define AG71XX_RX_RING_SIZE 128
++
++#ifdef CONFIG_AG71XX_DEBUG
++#define DBG(fmt, args...) printk(KERN_DEBUG fmt, ## args)
++#else
++#define DBG(fmt, args...) do {} while (0)
++#endif
++
++#define ag71xx_assert(_cond) \
++do { \
++ if (_cond) \
++ break; \
++ printk("%s,%d: assertion failed\n", __FILE__, __LINE__); \
++ BUG(); \
++} while (0)
++
++struct ag71xx_desc {
++ u32 data;
++ u32 ctrl;
++#define DESC_EMPTY BIT(31)
++#define DESC_MORE BIT(24)
++#define DESC_PKTLEN_M 0x1fff
++ u32 next;
++ u32 pad;
++};
++
++struct ag71xx_buf {
++ struct sk_buff *skb;
++};
++
++struct ag71xx_ring {
++ struct ag71xx_buf *buf;
++ struct ag71xx_desc *descs;
++ dma_addr_t descs_dma;
++ unsigned int curr;
++ unsigned int dirty;
++ unsigned int size;
++};
++
++struct ag71xx_mdio {
++ struct mii_bus *mii_bus;
++ int mii_irq[PHY_MAX_ADDR];
++ void __iomem *mdio_base;
++};
++
++struct ag71xx {
++ void __iomem *mac_base;
++ void __iomem *mac_base2;
++ void __iomem *mii_ctrl;
++
++ spinlock_t lock;
++ struct platform_device *pdev;
++ struct net_device *dev;
++ struct napi_struct napi;
++ u32 msg_enable;
++
++ struct ag71xx_ring rx_ring;
++ struct ag71xx_ring tx_ring;
++
++ struct mii_bus *mii_bus;
++ struct phy_device *phy_dev;
++
++ unsigned int link;
++ unsigned int speed;
++ int duplex;
++
++ struct work_struct restart_work;
++ struct timer_list oom_timer;
++};
++
++extern struct ethtool_ops ag71xx_ethtool_ops;
++
++extern struct ag71xx_mdio *ag71xx_mdio_bus;
++extern int ag71xx_mdio_driver_init(void) __init;
++extern void ag71xx_mdio_driver_exit(void);
++
++extern int ag71xx_phy_connect(struct ag71xx *ag);
++extern void ag71xx_phy_disconnect(struct ag71xx *ag);
++extern void ag71xx_phy_start(struct ag71xx *ag);
++extern void ag71xx_phy_stop(struct ag71xx *ag);
++
++static inline struct ag71xx_platform_data *ag71xx_get_pdata(struct ag71xx *ag)
++{
++ return ag->pdev->dev.platform_data;
++}
++
++static inline int ag71xx_desc_empty(struct ag71xx_desc *desc)
++{
++ return ((desc->ctrl & DESC_EMPTY) != 0);
++}
++
++static inline int ag71xx_desc_pktlen(struct ag71xx_desc *desc)
++{
++ return (desc->ctrl & DESC_PKTLEN_M);
++}
++
++/* Register offsets */
++#define AG71XX_REG_MAC_CFG1 0x0000
++#define AG71XX_REG_MAC_CFG2 0x0004
++#define AG71XX_REG_MAC_IPG 0x0008
++#define AG71XX_REG_MAC_HDX 0x000c
++#define AG71XX_REG_MAC_MFL 0x0010
++#define AG71XX_REG_MII_CFG 0x0020
++#define AG71XX_REG_MII_CMD 0x0024
++#define AG71XX_REG_MII_ADDR 0x0028
++#define AG71XX_REG_MII_CTRL 0x002c
++#define AG71XX_REG_MII_STATUS 0x0030
++#define AG71XX_REG_MII_IND 0x0034
++#define AG71XX_REG_MAC_IFCTL 0x0038
++#define AG71XX_REG_MAC_ADDR1 0x0040
++#define AG71XX_REG_MAC_ADDR2 0x0044
++#define AG71XX_REG_FIFO_CFG0 0x0048
++#define AG71XX_REG_FIFO_CFG1 0x004c
++#define AG71XX_REG_FIFO_CFG2 0x0050
++#define AG71XX_REG_FIFO_CFG3 0x0054
++#define AG71XX_REG_FIFO_CFG4 0x0058
++#define AG71XX_REG_FIFO_CFG5 0x005c
++#define AG71XX_REG_FIFO_RAM0 0x0060
++#define AG71XX_REG_FIFO_RAM1 0x0064
++#define AG71XX_REG_FIFO_RAM2 0x0068
++#define AG71XX_REG_FIFO_RAM3 0x006c
++#define AG71XX_REG_FIFO_RAM4 0x0070
++#define AG71XX_REG_FIFO_RAM5 0x0074
++#define AG71XX_REG_FIFO_RAM6 0x0078
++#define AG71XX_REG_FIFO_RAM7 0x007c
++
++#define AG71XX_REG_TX_CTRL 0x0180
++#define AG71XX_REG_TX_DESC 0x0184
++#define AG71XX_REG_TX_STATUS 0x0188
++#define AG71XX_REG_RX_CTRL 0x018c
++#define AG71XX_REG_RX_DESC 0x0190
++#define AG71XX_REG_RX_STATUS 0x0194
++#define AG71XX_REG_INT_ENABLE 0x0198
++#define AG71XX_REG_INT_STATUS 0x019c
++
++#define MAC_CFG1_TXE BIT(0) /* Tx Enable */
++#define MAC_CFG1_STX BIT(1) /* Synchronize Tx Enable */
++#define MAC_CFG1_RXE BIT(2) /* Rx Enable */
++#define MAC_CFG1_SRX BIT(3) /* Synchronize Rx Enable */
++#define MAC_CFG1_TFC BIT(4) /* Tx Flow Control Enable */
++#define MAC_CFG1_RFC BIT(5) /* Rx Flow Control Enable */
++#define MAC_CFG1_LB BIT(8) /* Loopback mode */
++#define MAC_CFG1_SR BIT(31) /* Soft Reset */
++
++#define MAC_CFG2_FDX BIT(0)
++#define MAC_CFG2_CRC_EN BIT(1)
++#define MAC_CFG2_PAD_CRC_EN BIT(2)
++#define MAC_CFG2_LEN_CHECK BIT(4)
++#define MAC_CFG2_HUGE_FRAME_EN BIT(5)
++#define MAC_CFG2_IF_1000 BIT(9)
++#define MAC_CFG2_IF_10_100 BIT(8)
++
++#define FIFO_CFG0_WTM BIT(0) /* Watermark Module */
++#define FIFO_CFG0_RXS BIT(1) /* Rx System Module */
++#define FIFO_CFG0_RXF BIT(2) /* Rx Fabric Module */
++#define FIFO_CFG0_TXS BIT(3) /* Tx System Module */
++#define FIFO_CFG0_TXF BIT(4) /* Tx Fabric Module */
++#define FIFO_CFG0_ALL (FIFO_CFG0_WTM | FIFO_CFG0_RXS | FIFO_CFG0_RXF \
++ | FIFO_CFG0_TXS | FIFO_CFG0_TXF)
++
++#define FIFO_CFG0_ENABLE_SHIFT 8
++
++#define FIFO_CFG4_DE BIT(0) /* Drop Event */
++#define FIFO_CFG4_DV BIT(1) /* RX_DV Event */
++#define FIFO_CFG4_FC BIT(2) /* False Carrier */
++#define FIFO_CFG4_CE BIT(3) /* Code Error */
++#define FIFO_CFG4_CR BIT(4) /* CRC error */
++#define FIFO_CFG4_LM BIT(5) /* Length Mismatch */
++#define FIFO_CFG4_LO BIT(6) /* Length out of range */
++#define FIFO_CFG4_OK BIT(7) /* Packet is OK */
++#define FIFO_CFG4_MC BIT(8) /* Multicast Packet */
++#define FIFO_CFG4_BC BIT(9) /* Broadcast Packet */
++#define FIFO_CFG4_DR BIT(10) /* Dribble */
++#define FIFO_CFG4_LE BIT(11) /* Long Event */
++#define FIFO_CFG4_CF BIT(12) /* Control Frame */
++#define FIFO_CFG4_PF BIT(13) /* Pause Frame */
++#define FIFO_CFG4_UO BIT(14) /* Unsupported Opcode */
++#define FIFO_CFG4_VT BIT(15) /* VLAN tag detected */
++#define FIFO_CFG4_FT BIT(16) /* Frame Truncated */
++#define FIFO_CFG4_UC BIT(17) /* Unicast Packet */
++
++#define FIFO_CFG5_DE BIT(0) /* Drop Event */
++#define FIFO_CFG5_DV BIT(1) /* RX_DV Event */
++#define FIFO_CFG5_FC BIT(2) /* False Carrier */
++#define FIFO_CFG5_CE BIT(3) /* Code Error */
++#define FIFO_CFG5_LM BIT(4) /* Length Mismatch */
++#define FIFO_CFG5_LO BIT(5) /* Length Out of Range */
++#define FIFO_CFG5_OK BIT(6) /* Packet is OK */
++#define FIFO_CFG5_MC BIT(7) /* Multicast Packet */
++#define FIFO_CFG5_BC BIT(8) /* Broadcast Packet */
++#define FIFO_CFG5_DR BIT(9) /* Dribble */
++#define FIFO_CFG5_CF BIT(10) /* Control Frame */
++#define FIFO_CFG5_PF BIT(11) /* Pause Frame */
++#define FIFO_CFG5_UO BIT(12) /* Unsupported Opcode */
++#define FIFO_CFG5_VT BIT(13) /* VLAN tag detected */
++#define FIFO_CFG5_LE BIT(14) /* Long Event */
++#define FIFO_CFG5_FT BIT(15) /* Frame Truncated */
++#define FIFO_CFG5_16 BIT(16) /* unknown */
++#define FIFO_CFG5_17 BIT(17) /* unknown */
++#define FIFO_CFG5_SF BIT(18) /* Short Frame */
++#define FIFO_CFG5_BM BIT(19) /* Byte Mode */
++
++#define AG71XX_INT_TX_PS BIT(0)
++#define AG71XX_INT_TX_UR BIT(1)
++#define AG71XX_INT_TX_BE BIT(3)
++#define AG71XX_INT_RX_PR BIT(4)
++#define AG71XX_INT_RX_OF BIT(6)
++#define AG71XX_INT_RX_BE BIT(7)
++
++#define MAC_IFCTL_SPEED BIT(16)
++
++#define MII_CFG_CLK_DIV_4 0
++#define MII_CFG_CLK_DIV_6 2
++#define MII_CFG_CLK_DIV_8 3
++#define MII_CFG_CLK_DIV_10 4
++#define MII_CFG_CLK_DIV_14 5
++#define MII_CFG_CLK_DIV_20 6
++#define MII_CFG_CLK_DIV_28 7
++#define MII_CFG_RESET BIT(31)
++
++#define MII_CMD_WRITE 0x0
++#define MII_CMD_READ 0x1
++#define MII_ADDR_SHIFT 8
++#define MII_IND_BUSY BIT(0)
++#define MII_IND_INVALID BIT(2)
++
++#define TX_CTRL_TXE BIT(0) /* Tx Enable */
++
++#define TX_STATUS_PS BIT(0) /* Packet Sent */
++#define TX_STATUS_UR BIT(1) /* Tx Underrun */
++#define TX_STATUS_BE BIT(3) /* Bus Error */
++
++#define RX_CTRL_RXE BIT(0) /* Rx Enable */
++
++#define RX_STATUS_PR BIT(0) /* Packet Received */
++#define RX_STATUS_OF BIT(2) /* Rx Overflow */
++#define RX_STATUS_BE BIT(3) /* Bus Error */
++
++#define MII_CTRL_IF_MASK 3
++#define MII_CTRL_SPEED_SHIFT 4
++#define MII_CTRL_SPEED_MASK 3
++#define MII_CTRL_SPEED_10 0
++#define MII_CTRL_SPEED_100 1
++#define MII_CTRL_SPEED_1000 2
++
++static inline void ag71xx_wr(struct ag71xx *ag, unsigned reg, u32 value)
++{
++ void __iomem *r;
++
++ switch (reg) {
++ case AG71XX_REG_MAC_CFG1 ... AG71XX_REG_MAC_MFL:
++ r = ag->mac_base + reg;
++ __raw_writel(value, r);
++ __raw_readl(r);
++ break;
++ case AG71XX_REG_MAC_IFCTL ... AG71XX_REG_INT_STATUS:
++ r = ag->mac_base2 + reg - AG71XX_REG_MAC_IFCTL;
++ __raw_writel(value, r);
++ __raw_readl(r);
++ break;
++ default:
++ BUG();
++ }
++}
++
++static inline u32 ag71xx_rr(struct ag71xx *ag, unsigned reg)
++{
++ void __iomem *r;
++ u32 ret;
++
++ switch (reg) {
++ case AG71XX_REG_MAC_CFG1 ... AG71XX_REG_MAC_MFL:
++ r = ag->mac_base + reg;
++ ret = __raw_readl(r);
++ break;
++ case AG71XX_REG_MAC_IFCTL ... AG71XX_REG_INT_STATUS:
++ r = ag->mac_base2 + reg - AG71XX_REG_MAC_IFCTL;
++ ret = __raw_readl(r);
++ break;
++ default:
++ BUG();
++ }
++
++ return ret;
++}
++
++static inline void ag71xx_sb(struct ag71xx *ag, unsigned reg, u32 mask)
++{
++ void __iomem *r;
++
++ switch (reg) {
++ case AG71XX_REG_MAC_CFG1 ... AG71XX_REG_MAC_MFL:
++ r = ag->mac_base + reg;
++ __raw_writel(__raw_readl(r) | mask, r);
++ __raw_readl(r);
++ break;
++ case AG71XX_REG_MAC_IFCTL ... AG71XX_REG_INT_STATUS:
++ r = ag->mac_base2 + reg - AG71XX_REG_MAC_IFCTL;
++ __raw_writel(__raw_readl(r) | mask, r);
++ __raw_readl(r);
++ break;
++ default:
++ BUG();
++ }
++}
++
++static inline void ag71xx_cb(struct ag71xx *ag, unsigned reg, u32 mask)
++{
++ void __iomem *r;
++
++ switch (reg) {
++ case AG71XX_REG_MAC_CFG1 ... AG71XX_REG_MAC_MFL:
++ r = ag->mac_base + reg;
++ __raw_writel(__raw_readl(r) & ~mask, r);
++ __raw_readl(r);
++ break;
++ case AG71XX_REG_MAC_IFCTL ... AG71XX_REG_INT_STATUS:
++ r = ag->mac_base2 + reg - AG71XX_REG_MAC_IFCTL;
++ __raw_writel(__raw_readl(r) & ~mask, r);
++ __raw_readl(r);
++ break;
++ default:
++ BUG();
++ }
++}
++
++static inline void ag71xx_int_enable(struct ag71xx *ag, u32 ints)
++{
++ ag71xx_sb(ag, AG71XX_REG_INT_ENABLE, ints);
++}
++
++static inline void ag71xx_int_disable(struct ag71xx *ag, u32 ints)
++{
++ ag71xx_cb(ag, AG71XX_REG_INT_ENABLE, ints);
++}
++
++static inline void ag71xx_mii_ctrl_wr(struct ag71xx *ag, u32 value)
++{
++ __raw_writel(value, ag->mii_ctrl);
++ __raw_readl(ag->mii_ctrl);
++}
++
++static inline u32 ag71xx_mii_ctrl_rr(struct ag71xx *ag)
++{
++ return __raw_readl(ag->mii_ctrl);
++}
++
++static void inline ag71xx_mii_ctrl_set_if(struct ag71xx *ag,
++ unsigned int mii_if)
++{
++ u32 t;
++
++ t = ag71xx_mii_ctrl_rr(ag);
++ t &= ~(MII_CTRL_IF_MASK);
++ t |= (mii_if & MII_CTRL_IF_MASK);
++ ag71xx_mii_ctrl_wr(ag, t);
++}
++
++static void inline ag71xx_mii_ctrl_set_speed(struct ag71xx *ag,
++ unsigned int speed)
++{
++ u32 t;
++
++ t = ag71xx_mii_ctrl_rr(ag);
++ t &= ~(MII_CTRL_SPEED_MASK << MII_CTRL_SPEED_SHIFT);
++ t |= (speed & MII_CTRL_SPEED_MASK) << MII_CTRL_SPEED_SHIFT;
++ ag71xx_mii_ctrl_wr(ag, t);
++}
++
++#ifdef CONFIG_AG71XX_AR8216_SUPPORT
++void ag71xx_add_ar8216_header(struct ag71xx *ag, struct sk_buff *skb);
++int ag71xx_remove_ar8216_header(struct ag71xx *ag, struct sk_buff *skb);
++#else
++static inline void ag71xx_add_ar8216_header(struct ag71xx *ag,
++ struct sk_buff *skb)
++{
++}
++
++static inline int ag71xx_remove_ar8216_header(struct ag71xx *ag,
++ struct sk_buff *skb)
++{
++ return 0;
++}
++#endif
++
++#endif /* _AG71XX_H */
+diff -Nur linux-2.6.29.1.orig/drivers/net/ag71xx/ag71xx_ar8216.c linux-2.6.29.1/drivers/net/ag71xx/ag71xx_ar8216.c
+--- linux-2.6.29.1.orig/drivers/net/ag71xx/ag71xx_ar8216.c 1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.29.1/drivers/net/ag71xx/ag71xx_ar8216.c 2009-04-13 14:27:34.803084620 +0200
+@@ -0,0 +1,53 @@
++/*
++ * Atheros AR71xx built-in ethernet mac driver
++ * Special support for the Atheros ar8216 switch chip
++ *
++ * Copyright (C) 2009 Gabor Juhos <juhosg@openwrt.org>
++ *
++ * Based on Atheros' AG7100 driver
++ *
++ * This program is free software; you can redistribute it and/or modify it
++ * under the terms of the GNU General Public License version 2 as published
++ * by the Free Software Foundation.
++ */
++
++#include "ag71xx.h"
++
++#define AR8216_PACKET_TYPE_MASK 0xf
++#define AR8216_PACKET_TYPE_NORMAL 0
++
++#define AR8216_HEADER_LEN 2
++
++void ag71xx_add_ar8216_header(struct ag71xx *ag, struct sk_buff *skb)
++{
++ struct ag71xx_platform_data *pdata = ag71xx_get_pdata(ag);
++
++ if (!pdata->has_ar8216)
++ return;
++
++ skb_push(skb, AR8216_HEADER_LEN);
++ skb->data[0] = 0x10;
++ skb->data[1] = 0x80;
++}
++
++int ag71xx_remove_ar8216_header(struct ag71xx *ag,
++ struct sk_buff *skb)
++{
++ struct ag71xx_platform_data *pdata = ag71xx_get_pdata(ag);
++ u8 type;
++
++ if (!pdata->has_ar8216)
++ return 0;
++
++ type = skb->data[1] & AR8216_PACKET_TYPE_MASK;
++
++ switch (type) {
++ case AR8216_PACKET_TYPE_NORMAL:
++ skb_pull(skb, AR8216_HEADER_LEN);
++ break;
++ default:
++ return -EINVAL;
++ }
++
++ return 0;
++}
+diff -Nur linux-2.6.29.1.orig/drivers/net/ag71xx/ag71xx_ethtool.c linux-2.6.29.1/drivers/net/ag71xx/ag71xx_ethtool.c
+--- linux-2.6.29.1.orig/drivers/net/ag71xx/ag71xx_ethtool.c 1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.29.1/drivers/net/ag71xx/ag71xx_ethtool.c 2009-04-13 14:27:34.803084620 +0200
+@@ -0,0 +1,71 @@
++/*
++ * Atheros AR71xx built-in ethernet mac driver
++ *
++ * Copyright (C) 2008-2009 Gabor Juhos <juhosg@openwrt.org>
++ * Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org>
++ *
++ * Based on Atheros' AG7100 driver
++ *
++ * This program is free software; you can redistribute it and/or modify it
++ * under the terms of the GNU General Public License version 2 as published
++ * by the Free Software Foundation.
++ */
++
++#include "ag71xx.h"
++
++static int ag71xx_ethtool_get_settings(struct net_device *dev,
++ struct ethtool_cmd *cmd)
++{
++ struct ag71xx *ag = netdev_priv(dev);
++ struct phy_device *phydev = ag->phy_dev;
++
++ if (!phydev)
++ return -ENODEV;
++
++ return phy_ethtool_gset(phydev, cmd);
++}
++
++static int ag71xx_ethtool_set_settings(struct net_device *dev,
++ struct ethtool_cmd *cmd)
++{
++ struct ag71xx *ag = netdev_priv(dev);
++ struct phy_device *phydev = ag->phy_dev;
++
++ if (!phydev)
++ return -ENODEV;
++
++ return phy_ethtool_sset(phydev, cmd);
++}
++
++static void ag71xx_ethtool_get_drvinfo(struct net_device *dev,
++ struct ethtool_drvinfo *info)
++{
++ struct ag71xx *ag = netdev_priv(dev);
++
++ strcpy(info->driver, ag->pdev->dev.driver->name);
++ strcpy(info->version, AG71XX_DRV_VERSION);
++ strcpy(info->bus_info, ag->pdev->dev.bus_id);
++}
++
++static u32 ag71xx_ethtool_get_msglevel(struct net_device *dev)
++{
++ struct ag71xx *ag = netdev_priv(dev);
++
++ return ag->msg_enable;
++}
++
++static void ag71xx_ethtool_set_msglevel(struct net_device *dev, u32 msg_level)
++{
++ struct ag71xx *ag = netdev_priv(dev);
++
++ ag->msg_enable = msg_level;
++}
++
++struct ethtool_ops ag71xx_ethtool_ops = {
++ .set_settings = ag71xx_ethtool_set_settings,
++ .get_settings = ag71xx_ethtool_get_settings,
++ .get_drvinfo = ag71xx_ethtool_get_drvinfo,
++ .get_msglevel = ag71xx_ethtool_get_msglevel,
++ .set_msglevel = ag71xx_ethtool_set_msglevel,
++ .get_link = ethtool_op_get_link,
++};
+diff -Nur linux-2.6.29.1.orig/drivers/net/ag71xx/ag71xx_main.c linux-2.6.29.1/drivers/net/ag71xx/ag71xx_main.c
+--- linux-2.6.29.1.orig/drivers/net/ag71xx/ag71xx_main.c 1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.29.1/drivers/net/ag71xx/ag71xx_main.c 2009-04-13 18:00:36.641934324 +0200
+@@ -0,0 +1,990 @@
++/*
++ * Atheros AR71xx built-in ethernet mac driver
++ *
++ * Copyright (C) 2008-2009 Gabor Juhos <juhosg@openwrt.org>
++ * Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org>
++ *
++ * Based on Atheros' AG7100 driver
++ *
++ * This program is free software; you can redistribute it and/or modify it
++ * under the terms of the GNU General Public License version 2 as published
++ * by the Free Software Foundation.
++ */
++
++#include "ag71xx.h"
++
++#define AG71XX_DEFAULT_MSG_ENABLE \
++ ( NETIF_MSG_DRV \
++ | NETIF_MSG_PROBE \
++ | NETIF_MSG_LINK \
++ | NETIF_MSG_TIMER \
++ | NETIF_MSG_IFDOWN \
++ | NETIF_MSG_IFUP \
++ | NETIF_MSG_RX_ERR \
++ | NETIF_MSG_TX_ERR )
++
++static int ag71xx_debug = -1;
++
++module_param(ag71xx_debug, int, 0);
++MODULE_PARM_DESC(ag71xx_debug, "Debug level (-1=defaults,0=none,...,16=all)");
++
++static void ag71xx_dump_dma_regs(struct ag71xx *ag)
++{
++ DBG("%s: dma_tx_ctrl=%08x, dma_tx_desc=%08x, dma_tx_status=%08x\n",
++ ag->dev->name,
++ ag71xx_rr(ag, AG71XX_REG_TX_CTRL),
++ ag71xx_rr(ag, AG71XX_REG_TX_DESC),
++ ag71xx_rr(ag, AG71XX_REG_TX_STATUS));
++
++ DBG("%s: dma_rx_ctrl=%08x, dma_rx_desc=%08x, dma_rx_status=%08x\n",
++ ag->dev->name,
++ ag71xx_rr(ag, AG71XX_REG_RX_CTRL),
++ ag71xx_rr(ag, AG71XX_REG_RX_DESC),
++ ag71xx_rr(ag, AG71XX_REG_RX_STATUS));
++}
++
++static void ag71xx_dump_regs(struct ag71xx *ag)
++{
++ DBG("%s: mac_cfg1=%08x, mac_cfg2=%08x, ipg=%08x, hdx=%08x, mfl=%08x\n",
++ ag->dev->name,
++ ag71xx_rr(ag, AG71XX_REG_MAC_CFG1),
++ ag71xx_rr(ag, AG71XX_REG_MAC_CFG2),
++ ag71xx_rr(ag, AG71XX_REG_MAC_IPG),
++ ag71xx_rr(ag, AG71XX_REG_MAC_HDX),
++ ag71xx_rr(ag, AG71XX_REG_MAC_MFL));
++ DBG("%s: mac_ifctl=%08x, mac_addr1=%08x, mac_addr2=%08x\n",
++ ag->dev->name,
++ ag71xx_rr(ag, AG71XX_REG_MAC_IFCTL),
++ ag71xx_rr(ag, AG71XX_REG_MAC_ADDR1),
++ ag71xx_rr(ag, AG71XX_REG_MAC_ADDR2));
++ DBG("%s: fifo_cfg0=%08x, fifo_cfg1=%08x, fifo_cfg2=%08x\n",
++ ag->dev->name,
++ ag71xx_rr(ag, AG71XX_REG_FIFO_CFG0),
++ ag71xx_rr(ag, AG71XX_REG_FIFO_CFG1),
++ ag71xx_rr(ag, AG71XX_REG_FIFO_CFG2));
++ DBG("%s: fifo_cfg3=%08x, fifo_cfg4=%08x, fifo_cfg5=%08x\n",
++ ag->dev->name,
++ ag71xx_rr(ag, AG71XX_REG_FIFO_CFG3),
++ ag71xx_rr(ag, AG71XX_REG_FIFO_CFG4),
++ ag71xx_rr(ag, AG71XX_REG_FIFO_CFG5));
++}
++
++static inline void ag71xx_dump_intr(struct ag71xx *ag, char *label, u32 intr)
++{
++ DBG("%s: %s intr=%08x %s%s%s%s%s%s\n",
++ ag->dev->name, label, intr,
++ (intr & AG71XX_INT_TX_PS) ? "TXPS " : "",
++ (intr & AG71XX_INT_TX_UR) ? "TXUR " : "",
++ (intr & AG71XX_INT_TX_BE) ? "TXBE " : "",
++ (intr & AG71XX_INT_RX_PR) ? "RXPR " : "",
++ (intr & AG71XX_INT_RX_OF) ? "RXOF " : "",
++ (intr & AG71XX_INT_RX_BE) ? "RXBE " : "");
++}
++
++static void ag71xx_ring_free(struct ag71xx_ring *ring)
++{
++ kfree(ring->buf);
++
++ if (ring->descs)
++ dma_free_coherent(NULL, ring->size * sizeof(*ring->descs),
++ ring->descs, ring->descs_dma);
++}
++
++static int ag71xx_ring_alloc(struct ag71xx_ring *ring, unsigned int size)
++{
++ int err;
++
++ ring->descs = dma_alloc_coherent(NULL, size * sizeof(*ring->descs),
++ &ring->descs_dma,
++ GFP_ATOMIC);
++ if (!ring->descs) {
++ err = -ENOMEM;
++ goto err;
++ }
++
++ ring->size = size;
++
++ ring->buf = kzalloc(size * sizeof(*ring->buf), GFP_KERNEL);
++ if (!ring->buf) {
++ err = -ENOMEM;
++ goto err;
++ }
++
++ return 0;
++
++ err:
++ return err;
++}
++
++static void ag71xx_ring_tx_clean(struct ag71xx *ag)
++{
++ struct ag71xx_ring *ring = &ag->tx_ring;
++ struct net_device *dev = ag->dev;
++
++ while (ring->curr != ring->dirty) {
++ u32 i = ring->dirty % AG71XX_TX_RING_SIZE;
++
++ if (!ag71xx_desc_empty(&ring->descs[i])) {
++ ring->descs[i].ctrl = 0;
++ dev->stats.tx_errors++;
++ }
++
++ if (ring->buf[i].skb)
++ dev_kfree_skb_any(ring->buf[i].skb);
++
++ ring->buf[i].skb = NULL;
++
++ ring->dirty++;
++ }
++
++ /* flush descriptors */
++ wmb();
++
++}
++
++static void ag71xx_ring_tx_init(struct ag71xx *ag)
++{
++ struct ag71xx_ring *ring = &ag->tx_ring;
++ int i;
++
++ for (i = 0; i < AG71XX_TX_RING_SIZE; i++) {
++ ring->descs[i].next = (u32) (ring->descs_dma +
++ sizeof(*ring->descs) * ((i + 1) % AG71XX_TX_RING_SIZE));
++
++ ring->descs[i].ctrl = DESC_EMPTY;
++ ring->buf[i].skb = NULL;
++ }
++
++ /* flush descriptors */
++ wmb();
++
++ ring->curr = 0;
++ ring->dirty = 0;
++}
++
++static void ag71xx_ring_rx_clean(struct ag71xx *ag)
++{
++ struct ag71xx_ring *ring = &ag->rx_ring;
++ int i;
++
++ if (!ring->buf)
++ return;
++
++ for (i = 0; i < AG71XX_RX_RING_SIZE; i++)
++ if (ring->buf[i].skb)
++ kfree_skb(ring->buf[i].skb);
++
++}
++
++static int ag71xx_ring_rx_init(struct ag71xx *ag)
++{
++ struct ag71xx_ring *ring = &ag->rx_ring;
++ unsigned int i;
++ int ret;
++
++ ret = 0;
++ for (i = 0; i < AG71XX_RX_RING_SIZE; i++)
++ ring->descs[i].next = (u32) (ring->descs_dma +
++ sizeof(*ring->descs) * ((i + 1) % AG71XX_RX_RING_SIZE));
++
++ for (i = 0; i < AG71XX_RX_RING_SIZE; i++) {
++ struct sk_buff *skb;
++
++ skb = dev_alloc_skb(AG71XX_RX_PKT_SIZE);
++ if (!skb) {
++ ret = -ENOMEM;
++ break;
++ }
++
++ dma_map_single(NULL, skb->data, AG71XX_RX_PKT_SIZE,
++ DMA_FROM_DEVICE);
++
++ skb->dev = ag->dev;
++ skb_reserve(skb, AG71XX_RX_PKT_RESERVE);
++
++ ring->buf[i].skb = skb;
++ ring->descs[i].data = virt_to_phys(skb->data);
++ ring->descs[i].ctrl = DESC_EMPTY;
++ }
++
++ /* flush descriptors */
++ wmb();
++
++ ring->curr = 0;
++ ring->dirty = 0;
++
++ return ret;
++}
++
++static int ag71xx_ring_rx_refill(struct ag71xx *ag)
++{
++ struct ag71xx_ring *ring = &ag->rx_ring;
++ unsigned int count;
++
++ count = 0;
++ for (; ring->curr - ring->dirty > 0; ring->dirty++) {
++ unsigned int i;
++
++ i = ring->dirty % AG71XX_RX_RING_SIZE;
++
++ if (ring->buf[i].skb == NULL) {
++ struct sk_buff *skb;
++
++ skb = dev_alloc_skb(AG71XX_RX_PKT_SIZE);
++ if (skb == NULL)
++ break;
++
++ dma_map_single(NULL, skb->data, AG71XX_RX_PKT_SIZE,
++ DMA_FROM_DEVICE);
++
++ skb_reserve(skb, AG71XX_RX_PKT_RESERVE);
++ skb->dev = ag->dev;
++
++ ring->buf[i].skb = skb;
++ ring->descs[i].data = virt_to_phys(skb->data);
++ }
++
++ ring->descs[i].ctrl = DESC_EMPTY;
++ count++;
++ }
++
++ /* flush descriptors */
++ wmb();
++
++ DBG("%s: %u rx descriptors refilled\n", ag->dev->name, count);
++
++ return count;
++}
++
++static int ag71xx_rings_init(struct ag71xx *ag)
++{
++ int ret;
++
++ ret = ag71xx_ring_alloc(&ag->tx_ring, AG71XX_TX_RING_SIZE);
++ if (ret)
++ return ret;
++
++ ag71xx_ring_tx_init(ag);
++
++ ret = ag71xx_ring_alloc(&ag->rx_ring, AG71XX_RX_RING_SIZE);
++ if (ret)
++ return ret;
++
++ ret = ag71xx_ring_rx_init(ag);
++ return ret;
++}
++
++static void ag71xx_rings_cleanup(struct ag71xx *ag)
++{
++ ag71xx_ring_rx_clean(ag);
++ ag71xx_ring_free(&ag->rx_ring);
++
++ ag71xx_ring_tx_clean(ag);
++ ag71xx_ring_free(&ag->tx_ring);
++}
++
++static void ag71xx_hw_set_macaddr(struct ag71xx *ag, unsigned char *mac)
++{
++ u32 t;
++
++ t = (((u32) mac[0]) << 24) | (((u32) mac[1]) << 16)
++ | (((u32) mac[2]) << 8) | ((u32) mac[3]);
++
++ ag71xx_wr(ag, AG71XX_REG_MAC_ADDR1, t);
++
++ t = (((u32) mac[4]) << 24) | (((u32) mac[5]) << 16);
++ ag71xx_wr(ag, AG71XX_REG_MAC_ADDR2, t);
++}
++
++static void ag71xx_dma_reset(struct ag71xx *ag)
++{
++ int i;
++
++ ag71xx_dump_dma_regs(ag);
++
++ /* stop RX and TX */
++ ag71xx_wr(ag, AG71XX_REG_RX_CTRL, 0);
++ ag71xx_wr(ag, AG71XX_REG_TX_CTRL, 0);
++
++ /* clear descriptor addresses */
++ ag71xx_wr(ag, AG71XX_REG_TX_DESC, 0);
++ ag71xx_wr(ag, AG71XX_REG_RX_DESC, 0);
++
++ /* clear pending RX/TX interrupts */
++ for (i = 0; i < 256; i++) {
++ ag71xx_wr(ag, AG71XX_REG_RX_STATUS, RX_STATUS_PR);
++ ag71xx_wr(ag, AG71XX_REG_TX_STATUS, TX_STATUS_PS);
++ }
++
++ /* clear pending errors */
++ ag71xx_wr(ag, AG71XX_REG_RX_STATUS, RX_STATUS_BE | RX_STATUS_OF);
++ ag71xx_wr(ag, AG71XX_REG_TX_STATUS, TX_STATUS_BE | TX_STATUS_UR);
++
++ if (ag71xx_rr(ag, AG71XX_REG_RX_STATUS))
++ printk(KERN_ALERT "%s: unable to clear DMA Rx status\n",
++ ag->dev->name);
++
++ if (ag71xx_rr(ag, AG71XX_REG_TX_STATUS))
++ printk(KERN_ALERT "%s: unable to clear DMA Tx status\n",
++ ag->dev->name);
++
++ ag71xx_dump_dma_regs(ag);
++}
++
++#define MAC_CFG1_INIT (MAC_CFG1_RXE | MAC_CFG1_TXE | \
++ MAC_CFG1_SRX | MAC_CFG1_STX)
++
++#define FIFO_CFG0_INIT (FIFO_CFG0_ALL << FIFO_CFG0_ENABLE_SHIFT)
++
++#define FIFO_CFG4_INIT (FIFO_CFG4_DE | FIFO_CFG4_DV | FIFO_CFG4_FC | \
++ FIFO_CFG4_CE | FIFO_CFG4_CR | FIFO_CFG4_LM | \
++ FIFO_CFG4_LO | FIFO_CFG4_OK | FIFO_CFG4_MC | \
++ FIFO_CFG4_BC | FIFO_CFG4_DR | FIFO_CFG4_LE | \
++ FIFO_CFG4_CF | FIFO_CFG4_PF | FIFO_CFG4_UO | \
++ FIFO_CFG4_VT)
++
++#define FIFO_CFG5_INIT (FIFO_CFG5_DE | FIFO_CFG5_DV | FIFO_CFG5_FC | \
++ FIFO_CFG5_CE | FIFO_CFG5_LO | FIFO_CFG5_OK | \
++ FIFO_CFG5_MC | FIFO_CFG5_BC | FIFO_CFG5_DR | \
++ FIFO_CFG5_CF | FIFO_CFG5_PF | FIFO_CFG5_VT | \
++ FIFO_CFG5_LE | FIFO_CFG5_FT | FIFO_CFG5_16 | \
++ FIFO_CFG5_17 | FIFO_CFG5_SF)
++
++static void ag71xx_hw_init(struct ag71xx *ag)
++{
++ struct ag71xx_platform_data *pdata = ag71xx_get_pdata(ag);
++
++ ag71xx_sb(ag, AG71XX_REG_MAC_CFG1, MAC_CFG1_SR);
++ udelay(20);
++
++ ar71xx_device_stop(pdata->reset_bit);
++ mdelay(100);
++ ar71xx_device_start(pdata->reset_bit);
++ mdelay(100);
++
++ /* setup MAC configuration registers */
++ ag71xx_wr(ag, AG71XX_REG_MAC_CFG1, MAC_CFG1_INIT);
++ ag71xx_sb(ag, AG71XX_REG_MAC_CFG2,
++ MAC_CFG2_PAD_CRC_EN | MAC_CFG2_LEN_CHECK);
++
++ /* setup max frame length */
++ ag71xx_wr(ag, AG71XX_REG_MAC_MFL, AG71XX_TX_MTU_LEN);
++
++ /* setup MII interface type */
++ ag71xx_mii_ctrl_set_if(ag, pdata->mii_if);
++
++ /* setup FIFO configuration registers */
++ ag71xx_wr(ag, AG71XX_REG_FIFO_CFG0, FIFO_CFG0_INIT);
++ ag71xx_wr(ag, AG71XX_REG_FIFO_CFG1, 0x0fff0000);
++ ag71xx_wr(ag, AG71XX_REG_FIFO_CFG2, 0x00001fff);
++ ag71xx_wr(ag, AG71XX_REG_FIFO_CFG4, FIFO_CFG4_INIT);
++ ag71xx_wr(ag, AG71XX_REG_FIFO_CFG5, FIFO_CFG5_INIT);
++
++ ag71xx_dma_reset(ag);
++}
++
++static void ag71xx_hw_start(struct ag71xx *ag)
++{
++ /* start RX engine */
++ ag71xx_wr(ag, AG71XX_REG_RX_CTRL, RX_CTRL_RXE);
++
++ /* enable interrupts */
++ ag71xx_wr(ag, AG71XX_REG_INT_ENABLE, AG71XX_INT_INIT);
++}
++
++static void ag71xx_hw_stop(struct ag71xx *ag)
++{
++ /* disable all interrupts */
++ ag71xx_wr(ag, AG71XX_REG_INT_ENABLE, 0);
++
++ ag71xx_dma_reset(ag);
++}
++
++static int ag71xx_open(struct net_device *dev)
++{
++ struct ag71xx *ag = netdev_priv(dev);
++ int ret;
++
++ ret = ag71xx_rings_init(ag);
++ if (ret)
++ goto err;
++
++ napi_enable(&ag->napi);
++
++ netif_carrier_off(dev);
++ ag71xx_phy_start(ag);
++
++ ag71xx_wr(ag, AG71XX_REG_TX_DESC, ag->tx_ring.descs_dma);
++ ag71xx_wr(ag, AG71XX_REG_RX_DESC, ag->rx_ring.descs_dma);
++
++ ag71xx_hw_set_macaddr(ag, dev->dev_addr);
++
++ ag71xx_hw_start(ag);
++
++ netif_start_queue(dev);
++
++ return 0;
++
++ err:
++ ag71xx_rings_cleanup(ag);
++ return ret;
++}
++
++static int ag71xx_stop(struct net_device *dev)
++{
++ struct ag71xx *ag = netdev_priv(dev);
++ unsigned long flags;
++
++ spin_lock_irqsave(&ag->lock, flags);
++
++ netif_stop_queue(dev);
++
++ ag71xx_hw_stop(ag);
++
++ netif_carrier_off(dev);
++ ag71xx_phy_stop(ag);
++
++ napi_disable(&ag->napi);
++ del_timer_sync(&ag->oom_timer);
++
++ spin_unlock_irqrestore(&ag->lock, flags);
++
++ ag71xx_rings_cleanup(ag);
++
++ return 0;
++}
++
++static int ag71xx_hard_start_xmit(struct sk_buff *skb, struct net_device *dev)
++{
++ struct ag71xx *ag = netdev_priv(dev);
++ struct ag71xx_platform_data *pdata = ag71xx_get_pdata(ag);
++ struct ag71xx_ring *ring = &ag->tx_ring;
++ struct ag71xx_desc *desc;
++ unsigned long flags;
++ int i;
++
++ i = ring->curr % AG71XX_TX_RING_SIZE;
++ desc = &ring->descs[i];
++
++ spin_lock_irqsave(&ag->lock, flags);
++ pdata->ddr_flush();
++ spin_unlock_irqrestore(&ag->lock, flags);
++
++ if (!ag71xx_desc_empty(desc))
++ goto err_drop;
++
++ ag71xx_add_ar8216_header(ag, skb);
++
++ if (skb->len <= 0) {
++ DBG("%s: packet len is too small\n", ag->dev->name);
++ goto err_drop;
++ }
++
++ dma_map_single(NULL, skb->data, skb->len, DMA_TO_DEVICE);
++
++ ring->buf[i].skb = skb;
++
++ /* setup descriptor fields */
++ desc->data = virt_to_phys(skb->data);
++ desc->ctrl = (skb->len & DESC_PKTLEN_M);
++
++ /* flush descriptor */
++ wmb();
++
++ ring->curr++;
++ if (ring->curr == (ring->dirty + AG71XX_TX_THRES_STOP)) {
++ DBG("%s: tx queue full\n", ag->dev->name);
++ netif_stop_queue(dev);
++ }
++
++ DBG("%s: packet injected into TX queue\n", ag->dev->name);
++
++ /* enable TX engine */
++ ag71xx_wr(ag, AG71XX_REG_TX_CTRL, TX_CTRL_TXE);
++
++ dev->trans_start = jiffies;
++
++ return 0;
++
++ err_drop:
++ dev->stats.tx_dropped++;
++
++ dev_kfree_skb(skb);
++ return 0;
++}
++
++static int ag71xx_do_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd)
++{
++ struct mii_ioctl_data *data = (struct mii_ioctl_data *) &ifr->ifr_data;
++ struct ag71xx *ag = netdev_priv(dev);
++ int ret;
++
++ switch (cmd) {
++ case SIOCETHTOOL:
++ if (ag->phy_dev == NULL)
++ break;
++
++ spin_lock_irq(&ag->lock);
++ ret = phy_ethtool_ioctl(ag->phy_dev, (void *) ifr->ifr_data);
++ spin_unlock_irq(&ag->lock);
++ return ret;
++
++ case SIOCSIFHWADDR:
++ if (copy_from_user
++ (dev->dev_addr, ifr->ifr_data, sizeof(dev->dev_addr)))
++ return -EFAULT;
++ return 0;
++
++ case SIOCGIFHWADDR:
++ if (copy_to_user
++ (ifr->ifr_data, dev->dev_addr, sizeof(dev->dev_addr)))
++ return -EFAULT;
++ return 0;
++
++ case SIOCGMIIPHY:
++ case SIOCGMIIREG:
++ case SIOCSMIIREG:
++ if (ag->phy_dev == NULL)
++ break;
++
++ return phy_mii_ioctl(ag->phy_dev, data, cmd);
++
++ default:
++ break;
++ }
++
++ return -EOPNOTSUPP;
++}
++
++static void ag71xx_oom_timer_handler(unsigned long data)
++{
++ struct net_device *dev = (struct net_device *) data;
++ struct ag71xx *ag = netdev_priv(dev);
++
++ netif_rx_schedule(&ag->napi);
++}
++
++static void ag71xx_tx_timeout(struct net_device *dev)
++{
++ struct ag71xx *ag = netdev_priv(dev);
++
++ if (netif_msg_tx_err(ag))
++ printk(KERN_DEBUG "%s: tx timeout\n", ag->dev->name);
++
++ schedule_work(&ag->restart_work);
++}
++
++static void ag71xx_restart_work_func(struct work_struct *work)
++{
++ struct ag71xx *ag = container_of(work, struct ag71xx, restart_work);
++
++ ag71xx_stop(ag->dev);
++ ag71xx_open(ag->dev);
++}
++
++static void ag71xx_tx_packets(struct ag71xx *ag)
++{
++ struct ag71xx_ring *ring = &ag->tx_ring;
++ unsigned int sent;
++
++ DBG("%s: processing TX ring\n", ag->dev->name);
++
++ sent = 0;
++ while (ring->dirty != ring->curr) {
++ unsigned int i = ring->dirty % AG71XX_TX_RING_SIZE;
++ struct ag71xx_desc *desc = &ring->descs[i];
++ struct sk_buff *skb = ring->buf[i].skb;
++
++ if (!ag71xx_desc_empty(desc))
++ break;
++
++ ag71xx_wr(ag, AG71XX_REG_TX_STATUS, TX_STATUS_PS);
++
++ ag->dev->stats.tx_bytes += skb->len;
++ ag->dev->stats.tx_packets++;
++
++ dev_kfree_skb_any(skb);
++ ring->buf[i].skb = NULL;
++
++ ring->dirty++;
++ sent++;
++ }
++
++ DBG("%s: %d packets sent out\n", ag->dev->name, sent);
++
++ if ((ring->curr - ring->dirty) < AG71XX_TX_THRES_WAKEUP)
++ netif_wake_queue(ag->dev);
++
++}
++
++static int ag71xx_rx_packets(struct ag71xx *ag, int limit)
++{
++ struct net_device *dev = ag->dev;
++ struct ag71xx_ring *ring = &ag->rx_ring;
++ int done = 0;
++
++ DBG("%s: rx packets, limit=%d, curr=%u, dirty=%u\n",
++ dev->name, limit, ring->curr, ring->dirty);
++
++ while (done < limit) {
++ unsigned int i = ring->curr % AG71XX_RX_RING_SIZE;
++ struct ag71xx_desc *desc = &ring->descs[i];
++ struct sk_buff *skb;
++ int pktlen;
++
++ if (ag71xx_desc_empty(desc))
++ break;
++
++ if ((ring->dirty + AG71XX_RX_RING_SIZE) == ring->curr) {
++ ag71xx_assert(0);
++ break;
++ }
++
++ ag71xx_wr(ag, AG71XX_REG_RX_STATUS, RX_STATUS_PR);
++
++ skb = ring->buf[i].skb;
++ pktlen = ag71xx_desc_pktlen(desc);
++ pktlen -= ETH_FCS_LEN;
++
++ skb_put(skb, pktlen);
++
++ skb->dev = dev;
++ skb->ip_summed = CHECKSUM_NONE;
++
++ dev->last_rx = jiffies;
++ dev->stats.rx_packets++;
++ dev->stats.rx_bytes += pktlen;
++
++ if (ag71xx_remove_ar8216_header(ag, skb) != 0) {
++ dev->stats.rx_dropped++;
++ kfree_skb(skb);
++ } else {
++ skb->protocol = eth_type_trans(skb, dev);
++ netif_receive_skb(skb);
++ }
++
++ ring->buf[i].skb = NULL;
++ done++;
++
++ ring->curr++;
++ }
++
++ ag71xx_ring_rx_refill(ag);
++
++ DBG("%s: rx finish, curr=%u, dirty=%u, done=%d\n",
++ dev->name, ring->curr, ring->dirty, done);
++
++ return done;
++}
++
++static int ag71xx_poll(struct napi_struct *napi, int limit)
++{
++ struct ag71xx *ag = container_of(napi, struct ag71xx, napi);
++ struct ag71xx_platform_data *pdata = ag71xx_get_pdata(ag);
++ struct net_device *dev = ag->dev;
++ struct ag71xx_ring *rx_ring;
++ unsigned long flags;
++ u32 status;
++ int done;
++
++ pdata->ddr_flush();
++ ag71xx_tx_packets(ag);
++
++ DBG("%s: processing RX ring\n", dev->name);
++ done = ag71xx_rx_packets(ag, limit);
++
++ rx_ring = &ag->rx_ring;
++ if (rx_ring->buf[rx_ring->dirty % AG71XX_RX_RING_SIZE].skb == NULL)
++ goto oom;
++
++ status = ag71xx_rr(ag, AG71XX_REG_RX_STATUS);
++ if (unlikely(status & RX_STATUS_OF)) {
++ ag71xx_wr(ag, AG71XX_REG_RX_STATUS, RX_STATUS_OF);
++ dev->stats.rx_fifo_errors++;
++
++ /* restart RX */
++ ag71xx_wr(ag, AG71XX_REG_RX_CTRL, RX_CTRL_RXE);
++ }
++
++ if (done < limit) {
++ if (status & RX_STATUS_PR)
++ goto more;
++
++ status = ag71xx_rr(ag, AG71XX_REG_TX_STATUS);
++ if (status & TX_STATUS_PS)
++ goto more;
++
++ DBG("%s: disable polling mode, done=%d, limit=%d\n",
++ dev->name, done, limit);
++
++ netif_rx_complete(napi);
++
++ /* enable interrupts */
++ spin_lock_irqsave(&ag->lock, flags);
++ ag71xx_int_enable(ag, AG71XX_INT_POLL);
++ spin_unlock_irqrestore(&ag->lock, flags);
++ return done;
++ }
++
++ more:
++ DBG("%s: stay in polling mode, done=%d, limit=%d\n",
++ dev->name, done, limit);
++ return done;
++
++ oom:
++ if (netif_msg_rx_err(ag))
++ printk(KERN_DEBUG "%s: out of memory\n", dev->name);
++
++ mod_timer(&ag->oom_timer, jiffies + AG71XX_OOM_REFILL);
++ netif_rx_complete(napi);
++ return 0;
++}
++
++static irqreturn_t ag71xx_interrupt(int irq, void *dev_id)
++{
++ struct net_device *dev = dev_id;
++ struct ag71xx *ag = netdev_priv(dev);
++ u32 status;
++
++ status = ag71xx_rr(ag, AG71XX_REG_INT_STATUS);
++ ag71xx_dump_intr(ag, "raw", status);
++
++ if (unlikely(!status))
++ return IRQ_NONE;
++
++ if (unlikely(status & AG71XX_INT_ERR)) {
++ if (status & AG71XX_INT_TX_BE) {
++ ag71xx_wr(ag, AG71XX_REG_TX_STATUS, TX_STATUS_BE);
++ dev_err(&dev->dev, "TX BUS error\n");
++ }
++ if (status & AG71XX_INT_RX_BE) {
++ ag71xx_wr(ag, AG71XX_REG_RX_STATUS, RX_STATUS_BE);
++ dev_err(&dev->dev, "RX BUS error\n");
++ }
++ }
++
++ if (likely(status & AG71XX_INT_POLL)) {
++ ag71xx_int_disable(ag, AG71XX_INT_POLL);
++ DBG("%s: enable polling mode\n", dev->name);
++ netif_rx_schedule(&ag->napi);
++ }
++
++ return IRQ_HANDLED;
++}
++
++static void ag71xx_set_multicast_list(struct net_device *dev)
++{
++ /* TODO */
++}
++
++static int __init ag71xx_probe(struct platform_device *pdev)
++{
++ struct net_device *dev;
++ struct resource *res;
++ struct ag71xx *ag;
++ struct ag71xx_platform_data *pdata;
++ int err;
++
++ pdata = pdev->dev.platform_data;
++ if (!pdata) {
++ dev_err(&pdev->dev, "no platform data specified\n");
++ err = -ENXIO;
++ goto err_out;
++ }
++
++ dev = alloc_etherdev(sizeof(*ag));
++ if (!dev) {
++ dev_err(&pdev->dev, "alloc_etherdev failed\n");
++ err = -ENOMEM;
++ goto err_out;
++ }
++
++ SET_NETDEV_DEV(dev, &pdev->dev);
++
++ ag = netdev_priv(dev);
++ ag->pdev = pdev;
++ ag->dev = dev;
++ ag->mii_bus = ag71xx_mdio_bus->mii_bus;
++ ag->msg_enable = netif_msg_init(ag71xx_debug,
++ AG71XX_DEFAULT_MSG_ENABLE);
++ spin_lock_init(&ag->lock);
++
++ res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "mac_base");
++ if (!res) {
++ dev_err(&pdev->dev, "no mac_base resource found\n");
++ err = -ENXIO;
++ goto err_out;
++ }
++
++ ag->mac_base = ioremap_nocache(res->start, res->end - res->start + 1);
++ if (!ag->mac_base) {
++ dev_err(&pdev->dev, "unable to ioremap mac_base\n");
++ err = -ENOMEM;
++ goto err_free_dev;
++ }
++
++ res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "mac_base2");
++ if (!res) {
++ dev_err(&pdev->dev, "no mac_base2 resource found\n");
++ err = -ENXIO;
++ goto err_unmap_base1;
++ }
++
++ ag->mac_base2 = ioremap_nocache(res->start, res->end - res->start + 1);
++ if (!ag->mac_base) {
++ dev_err(&pdev->dev, "unable to ioremap mac_base2\n");
++ err = -ENOMEM;
++ goto err_unmap_base1;
++ }
++
++ res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "mii_ctrl");
++ if (!res) {
++ dev_err(&pdev->dev, "no mii_ctrl resource found\n");
++ err = -ENXIO;
++ goto err_unmap_base2;
++ }
++
++ ag->mii_ctrl = ioremap_nocache(res->start, res->end - res->start + 1);
++ if (!ag->mii_ctrl) {
++ dev_err(&pdev->dev, "unable to ioremap mii_ctrl\n");
++ err = -ENOMEM;
++ goto err_unmap_base2;
++ }
++
++ dev->irq = platform_get_irq(pdev, 0);
++ err = request_irq(dev->irq, ag71xx_interrupt,
++ IRQF_DISABLED | IRQF_SAMPLE_RANDOM,
++ dev->name, dev);
++ if (err) {
++ dev_err(&pdev->dev, "unable to request IRQ %d\n", dev->irq);
++ goto err_unmap_mii_ctrl;
++ }
++
++ dev->base_addr = (unsigned long)ag->mac_base;
++ dev->open = ag71xx_open;
++ dev->stop = ag71xx_stop;
++ dev->hard_start_xmit = ag71xx_hard_start_xmit;
++ dev->set_multicast_list = ag71xx_set_multicast_list;
++ dev->do_ioctl = ag71xx_do_ioctl;
++ dev->ethtool_ops = &ag71xx_ethtool_ops;
++
++ dev->tx_timeout = ag71xx_tx_timeout;
++ INIT_WORK(&ag->restart_work, ag71xx_restart_work_func);
++
++ init_timer(&ag->oom_timer);
++ ag->oom_timer.data = (unsigned long) dev;
++ ag->oom_timer.function = ag71xx_oom_timer_handler;
++
++ memcpy(dev->dev_addr, pdata->mac_addr, ETH_ALEN);
++
++ netif_napi_add(dev, &ag->napi, ag71xx_poll, AG71XX_NAPI_WEIGHT);
++
++ err = register_netdev(dev);
++ if (err) {
++ dev_err(&pdev->dev, "unable to register net device\n");
++ goto err_free_irq;
++ }
++
++ printk(KERN_INFO "%s: Atheros AG71xx at 0x%08lx, irq %d\n",
++ dev->name, dev->base_addr, dev->irq);
++
++ ag71xx_dump_regs(ag);
++
++ ag71xx_hw_init(ag);
++
++ ag71xx_dump_regs(ag);
++
++ /* Reset the mdio bus explicitly */
++ if (ag->mii_bus) {
++ mutex_lock(&ag->mii_bus->mdio_lock);
++ ag->mii_bus->reset(ag->mii_bus);
++ mutex_unlock(&ag->mii_bus->mdio_lock);
++ }
++
++ err = ag71xx_phy_connect(ag);
++ if (err)
++ goto err_unregister_netdev;
++
++ platform_set_drvdata(pdev, dev);
++
++ return 0;
++
++ err_unregister_netdev:
++ unregister_netdev(dev);
++ err_free_irq:
++ free_irq(dev->irq, dev);
++ err_unmap_mii_ctrl:
++ iounmap(ag->mii_ctrl);
++ err_unmap_base2:
++ iounmap(ag->mac_base2);
++ err_unmap_base1:
++ iounmap(ag->mac_base);
++ err_free_dev:
++ kfree(dev);
++ err_out:
++ platform_set_drvdata(pdev, NULL);
++ return err;
++}
++
++static int __exit ag71xx_remove(struct platform_device *pdev)
++{
++ struct net_device *dev = platform_get_drvdata(pdev);
++
++ if (dev) {
++ struct ag71xx *ag = netdev_priv(dev);
++
++ ag71xx_phy_disconnect(ag);
++ unregister_netdev(dev);
++ free_irq(dev->irq, dev);
++ iounmap(ag->mii_ctrl);
++ iounmap(ag->mac_base2);
++ iounmap(ag->mac_base);
++ kfree(dev);
++ platform_set_drvdata(pdev, NULL);
++ }
++
++ return 0;
++}
++
++static struct platform_driver ag71xx_driver = {
++ .probe = ag71xx_probe,
++ .remove = __exit_p(ag71xx_remove),
++ .driver = {
++ .name = AG71XX_DRV_NAME,
++ }
++};
++
++static int __init ag71xx_module_init(void)
++{
++ int ret;
++
++ ret = ag71xx_mdio_driver_init();
++ if (ret)
++ goto err_out;
++
++ ret = platform_driver_register(&ag71xx_driver);
++ if (ret)
++ goto err_mdio_exit;
++
++ return 0;
++
++ err_mdio_exit:
++ ag71xx_mdio_driver_exit();
++ err_out:
++ return ret;
++}
++
++static void __exit ag71xx_module_exit(void)
++{
++ platform_driver_unregister(&ag71xx_driver);
++ ag71xx_mdio_driver_exit();
++}
++
++module_init(ag71xx_module_init);
++module_exit(ag71xx_module_exit);
++
++MODULE_VERSION(AG71XX_DRV_VERSION);
++MODULE_AUTHOR("Gabor Juhos <juhosg@openwrt.org>");
++MODULE_AUTHOR("Imre Kaloz <kaloz@openwrt.org>");
++MODULE_LICENSE("GPL v2");
++MODULE_ALIAS("platform:" AG71XX_DRV_NAME);
+diff -Nur linux-2.6.29.1.orig/drivers/net/ag71xx/ag71xx_mdio.c linux-2.6.29.1/drivers/net/ag71xx/ag71xx_mdio.c
+--- linux-2.6.29.1.orig/drivers/net/ag71xx/ag71xx_mdio.c 1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.29.1/drivers/net/ag71xx/ag71xx_mdio.c 2009-04-13 14:27:34.827084882 +0200
+@@ -0,0 +1,233 @@
++/*
++ * Atheros AR71xx built-in ethernet mac driver
++ *
++ * Copyright (C) 2008-2009 Gabor Juhos <juhosg@openwrt.org>
++ * Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org>
++ *
++ * Based on Atheros' AG7100 driver
++ *
++ * This program is free software; you can redistribute it and/or modify it
++ * under the terms of the GNU General Public License version 2 as published
++ * by the Free Software Foundation.
++ */
++
++#include "ag71xx.h"
++
++#define AG71XX_MDIO_RETRY 1000
++#define AG71XX_MDIO_DELAY 5
++
++struct ag71xx_mdio *ag71xx_mdio_bus;
++
++static inline void ag71xx_mdio_wr(struct ag71xx_mdio *am, unsigned reg,
++ u32 value)
++{
++ __raw_writel(value, am->mdio_base + reg - AG71XX_REG_MII_CFG);
++}
++
++static inline u32 ag71xx_mdio_rr(struct ag71xx_mdio *am, unsigned reg)
++{
++ return __raw_readl(am->mdio_base + reg - AG71XX_REG_MII_CFG);
++}
++
++static void ag71xx_mdio_dump_regs(struct ag71xx_mdio *am)
++{
++ DBG("%s: mii_cfg=%08x, mii_cmd=%08x, mii_addr=%08x\n",
++ am->mii_bus->name,
++ ag71xx_mdio_rr(am, AG71XX_REG_MII_CFG),
++ ag71xx_mdio_rr(am, AG71XX_REG_MII_CMD),
++ ag71xx_mdio_rr(am, AG71XX_REG_MII_ADDR));
++ DBG("%s: mii_ctrl=%08x, mii_status=%08x, mii_ind=%08x\n",
++ am->mii_bus->name,
++ ag71xx_mdio_rr(am, AG71XX_REG_MII_CTRL),
++ ag71xx_mdio_rr(am, AG71XX_REG_MII_STATUS),
++ ag71xx_mdio_rr(am, AG71XX_REG_MII_IND));
++}
++
++static int ag71xx_mdio_mii_read(struct ag71xx_mdio *am, int addr, int reg)
++{
++ int ret;
++ int i;
++
++ ag71xx_mdio_wr(am, AG71XX_REG_MII_CMD, MII_CMD_WRITE);
++ ag71xx_mdio_wr(am, AG71XX_REG_MII_ADDR,
++ ((addr & 0xff) << MII_ADDR_SHIFT) | (reg & 0xff));
++ ag71xx_mdio_wr(am, AG71XX_REG_MII_CMD, MII_CMD_READ);
++
++ i = AG71XX_MDIO_RETRY;
++ while (ag71xx_mdio_rr(am, AG71XX_REG_MII_IND) & MII_IND_BUSY) {
++ if (i-- == 0) {
++ printk(KERN_ERR "%s: mii_read timed out\n",
++ am->mii_bus->name);
++ ret = 0xffff;
++ goto out;
++ }
++ udelay(AG71XX_MDIO_DELAY);
++ }
++
++ ret = ag71xx_mdio_rr(am, AG71XX_REG_MII_STATUS) & 0xffff;
++ ag71xx_mdio_wr(am, AG71XX_REG_MII_CMD, MII_CMD_WRITE);
++
++ DBG("mii_read: addr=%04x, reg=%04x, value=%04x\n", addr, reg, ret);
++
++ out:
++ return ret;
++}
++
++static void ag71xx_mdio_mii_write(struct ag71xx_mdio *am,
++ int addr, int reg, u16 val)
++{
++ int i;
++
++ DBG("mii_write: addr=%04x, reg=%04x, value=%04x\n", addr, reg, val);
++
++ ag71xx_mdio_wr(am, AG71XX_REG_MII_ADDR,
++ ((addr & 0xff) << MII_ADDR_SHIFT) | (reg & 0xff));
++ ag71xx_mdio_wr(am, AG71XX_REG_MII_CTRL, val);
++
++ i = AG71XX_MDIO_RETRY;
++ while (ag71xx_mdio_rr(am, AG71XX_REG_MII_IND) & MII_IND_BUSY) {
++ if (i-- == 0) {
++ printk(KERN_ERR "%s: mii_write timed out\n",
++ am->mii_bus->name);
++ break;
++ }
++ udelay(AG71XX_MDIO_DELAY);
++ }
++}
++
++static int ag71xx_mdio_reset(struct mii_bus *bus)
++{
++ struct ag71xx_mdio *am = bus->priv;
++
++ ag71xx_mdio_wr(am, AG71XX_REG_MII_CFG, MII_CFG_RESET);
++ udelay(100);
++
++ ag71xx_mdio_wr(am, AG71XX_REG_MII_CFG, MII_CFG_CLK_DIV_28);
++ udelay(100);
++
++ return 0;
++}
++
++static int ag71xx_mdio_read(struct mii_bus *bus, int addr, int reg)
++{
++ struct ag71xx_mdio *am = bus->priv;
++
++ return ag71xx_mdio_mii_read(am, addr, reg);
++}
++
++static int ag71xx_mdio_write(struct mii_bus *bus, int addr, int reg, u16 val)
++{
++ struct ag71xx_mdio *am = bus->priv;
++
++ ag71xx_mdio_mii_write(am, addr, reg, val);
++ return 0;
++}
++
++static int __init ag71xx_mdio_probe(struct platform_device *pdev)
++{
++ struct ag71xx_mdio_platform_data *pdata;
++ struct ag71xx_mdio *am;
++ struct resource *res;
++ int i;
++ int err;
++
++ if (ag71xx_mdio_bus)
++ return -EBUSY;
++
++ am = kzalloc(sizeof(*am), GFP_KERNEL);
++ if (!am) {
++ err = -ENOMEM;
++ goto err_out;
++ }
++
++ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
++ if (!res) {
++ dev_err(&pdev->dev, "no iomem resource found\n");
++ err = -ENXIO;
++ goto err_out;
++ }
++
++ am->mdio_base = ioremap_nocache(res->start, res->end - res->start + 1);
++ if (!am->mdio_base) {
++ dev_err(&pdev->dev, "unable to ioremap registers\n");
++ err = -ENOMEM;
++ goto err_free_mdio;
++ }
++
++ am->mii_bus = mdiobus_alloc();
++ if (am->mii_bus == NULL) {
++ err = -ENOMEM;
++ goto err_iounmap;
++ }
++
++ am->mii_bus->name = "ag71xx_mdio";
++ am->mii_bus->read = ag71xx_mdio_read;
++ am->mii_bus->write = ag71xx_mdio_write;
++ am->mii_bus->reset = ag71xx_mdio_reset;
++ am->mii_bus->irq = am->mii_irq;
++ am->mii_bus->priv = am;
++ am->mii_bus->parent = &pdev->dev;
++ snprintf(am->mii_bus->id, MII_BUS_ID_SIZE, "%x", 0);
++
++ pdata = pdev->dev.platform_data;
++ if (pdata)
++ am->mii_bus->phy_mask = pdata->phy_mask;
++
++ for (i = 0; i < PHY_MAX_ADDR; i++)
++ am->mii_irq[i] = PHY_POLL;
++
++ ag71xx_mdio_wr(am, AG71XX_REG_MAC_CFG1, 0);
++
++ err = mdiobus_register(am->mii_bus);
++ if (err)
++ goto err_free_bus;
++
++ ag71xx_mdio_dump_regs(am);
++
++ platform_set_drvdata(pdev, am);
++ ag71xx_mdio_bus = am;
++ return 0;
++
++ err_free_bus:
++ mdiobus_free(am->mii_bus);
++ err_iounmap:
++ iounmap(am->mdio_base);
++ err_free_mdio:
++ kfree(am);
++ err_out:
++ return err;
++}
++
++static int __exit ag71xx_mdio_remove(struct platform_device *pdev)
++{
++ struct ag71xx_mdio *am = platform_get_drvdata(pdev);
++
++ if (am) {
++ ag71xx_mdio_bus = NULL;
++ mdiobus_unregister(am->mii_bus);
++ mdiobus_free(am->mii_bus);
++ iounmap(am->mdio_base);
++ kfree(am);
++ platform_set_drvdata(pdev, NULL);
++ }
++
++ return 0;
++}
++
++static struct platform_driver ag71xx_mdio_driver = {
++ .probe = ag71xx_mdio_probe,
++ .remove = __exit_p(ag71xx_mdio_remove),
++ .driver = {
++ .name = "ag71xx-mdio",
++ }
++};
++
++int ag71xx_mdio_driver_init(void)
++{
++ return platform_driver_register(&ag71xx_mdio_driver);
++}
++
++void ag71xx_mdio_driver_exit(void)
++{
++ platform_driver_unregister(&ag71xx_mdio_driver);
++}
+diff -Nur linux-2.6.29.1.orig/drivers/net/ag71xx/ag71xx_phy.c linux-2.6.29.1/drivers/net/ag71xx/ag71xx_phy.c
+--- linux-2.6.29.1.orig/drivers/net/ag71xx/ag71xx_phy.c 1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.29.1/drivers/net/ag71xx/ag71xx_phy.c 2009-04-13 14:27:34.827084882 +0200
+@@ -0,0 +1,287 @@
++/*
++ * Atheros AR71xx built-in ethernet mac driver
++ *
++ * Copyright (C) 2008-2009 Gabor Juhos <juhosg@openwrt.org>
++ * Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org>
++ *
++ * Based on Atheros' AG7100 driver
++ *
++ * This program is free software; you can redistribute it and/or modify it
++ * under the terms of the GNU General Public License version 2 as published
++ * by the Free Software Foundation.
++ */
++
++#include "ag71xx.h"
++
++static unsigned char *ag71xx_speed_str(struct ag71xx *ag)
++{
++ switch (ag->speed) {
++ case SPEED_1000:
++ return "1000";
++ case SPEED_100:
++ return "100";
++ case SPEED_10:
++ return "10";
++ }
++
++ return "?";
++}
++
++#define AR71XX_PLL_VAL_1000 0x00110000
++#define AR71XX_PLL_VAL_100 0x00001099
++#define AR71XX_PLL_VAL_10 0x00991099
++
++#define AR91XX_PLL_VAL_1000 0x1a000000
++#define AR91XX_PLL_VAL_100 0x13000a44
++#define AR91XX_PLL_VAL_10 0x00441099
++
++static void ag71xx_phy_link_update(struct ag71xx *ag)
++{
++ struct ag71xx_platform_data *pdata = ag71xx_get_pdata(ag);
++ u32 cfg2;
++ u32 ifctl;
++ u32 pll;
++ u32 fifo5;
++ u32 mii_speed;
++
++ if (!ag->link) {
++ netif_carrier_off(ag->dev);
++ if (netif_msg_link(ag))
++ printk(KERN_INFO "%s: link down\n", ag->dev->name);
++ return;
++ }
++
++ cfg2 = ag71xx_rr(ag, AG71XX_REG_MAC_CFG2);
++ cfg2 &= ~(MAC_CFG2_IF_1000 | MAC_CFG2_IF_10_100 | MAC_CFG2_FDX);
++ cfg2 |= (ag->duplex) ? MAC_CFG2_FDX : 0;
++
++ ifctl = ag71xx_rr(ag, AG71XX_REG_MAC_IFCTL);
++ ifctl &= ~(MAC_IFCTL_SPEED);
++
++ fifo5 = ag71xx_rr(ag, AG71XX_REG_FIFO_CFG5);
++ fifo5 &= ~FIFO_CFG5_BM;
++
++ switch (ag->speed) {
++ case SPEED_1000:
++ mii_speed = MII_CTRL_SPEED_1000;
++ cfg2 |= MAC_CFG2_IF_1000;
++ pll = pdata->is_ar91xx ? AR91XX_PLL_VAL_1000
++ : AR71XX_PLL_VAL_1000;
++ fifo5 |= FIFO_CFG5_BM;
++ break;
++ case SPEED_100:
++ mii_speed = MII_CTRL_SPEED_100;
++ cfg2 |= MAC_CFG2_IF_10_100;
++ ifctl |= MAC_IFCTL_SPEED;
++ pll = pdata->is_ar91xx ? AR91XX_PLL_VAL_100
++ : AR71XX_PLL_VAL_100;
++ break;
++ case SPEED_10:
++ mii_speed = MII_CTRL_SPEED_10;
++ cfg2 |= MAC_CFG2_IF_10_100;
++ pll = pdata->is_ar91xx ? AR91XX_PLL_VAL_10
++ : AR71XX_PLL_VAL_10;
++ break;
++ default:
++ BUG();
++ return;
++ }
++
++ ag71xx_wr(ag, AG71XX_REG_FIFO_CFG3,
++ pdata->is_ar91xx ? 0x780fff : 0x008001ff);
++ pdata->set_pll(pll);
++ ag71xx_mii_ctrl_set_speed(ag, mii_speed);
++
++ ag71xx_wr(ag, AG71XX_REG_MAC_CFG2, cfg2);
++ ag71xx_wr(ag, AG71XX_REG_FIFO_CFG5, fifo5);
++ ag71xx_wr(ag, AG71XX_REG_MAC_IFCTL, ifctl);
++
++ netif_carrier_on(ag->dev);
++ if (netif_msg_link(ag))
++ printk(KERN_INFO "%s: link up (%sMbps/%s duplex)\n",
++ ag->dev->name,
++ ag71xx_speed_str(ag),
++ (DUPLEX_FULL == ag->duplex) ? "Full" : "Half");
++
++ DBG("%s: fifo_cfg0=%#x, fifo_cfg1=%#x, fifo_cfg2=%#x\n",
++ ag->dev->name,
++ ag71xx_rr(ag, AG71XX_REG_FIFO_CFG0),
++ ag71xx_rr(ag, AG71XX_REG_FIFO_CFG1),
++ ag71xx_rr(ag, AG71XX_REG_FIFO_CFG2));
++
++ DBG("%s: fifo_cfg3=%#x, fifo_cfg4=%#x, fifo_cfg5=%#x\n",
++ ag->dev->name,
++ ag71xx_rr(ag, AG71XX_REG_FIFO_CFG3),
++ ag71xx_rr(ag, AG71XX_REG_FIFO_CFG4),
++ ag71xx_rr(ag, AG71XX_REG_FIFO_CFG5));
++
++ DBG("%s: mac_cfg2=%#x, mac_ifctl=%#x, mii_ctrl=%#x\n",
++ ag->dev->name,
++ ag71xx_rr(ag, AG71XX_REG_MAC_CFG2),
++ ag71xx_rr(ag, AG71XX_REG_MAC_IFCTL),
++ ag71xx_mii_ctrl_rr(ag));
++}
++
++static void ag71xx_phy_link_adjust(struct net_device *dev)
++{
++ struct ag71xx *ag = netdev_priv(dev);
++ struct phy_device *phydev = ag->phy_dev;
++ unsigned long flags;
++ int status_change = 0;
++
++ spin_lock_irqsave(&ag->lock, flags);
++
++ if (phydev->link) {
++ if (ag->duplex != phydev->duplex
++ || ag->speed != phydev->speed) {
++ status_change = 1;
++ }
++ }
++
++ if (phydev->link != ag->link)
++ status_change = 1;
++
++ ag->link = phydev->link;
++ ag->duplex = phydev->duplex;
++ ag->speed = phydev->speed;
++
++ if (status_change)
++ ag71xx_phy_link_update(ag);
++
++ spin_unlock_irqrestore(&ag->lock, flags);
++}
++
++void ag71xx_phy_start(struct ag71xx *ag)
++{
++ if (ag->phy_dev) {
++ phy_start(ag->phy_dev);
++ } else {
++ struct ag71xx_platform_data *pdata = ag71xx_get_pdata(ag);
++
++ ag->duplex = pdata->duplex;
++ ag->speed = pdata->speed;
++ ag->link = 1;
++ ag71xx_phy_link_update(ag);
++ }
++}
++
++void ag71xx_phy_stop(struct ag71xx *ag)
++{
++ if (ag->phy_dev) {
++ phy_stop(ag->phy_dev);
++ } else {
++ ag->duplex = -1;
++ ag->link = 0;
++ ag->speed = 0;
++ ag71xx_phy_link_update(ag);
++ }
++}
++
++static int ag71xx_phy_connect_fixed(struct ag71xx *ag)
++{
++ struct net_device *dev = ag->dev;
++ struct ag71xx_platform_data *pdata = ag71xx_get_pdata(ag);
++ int ret = 0;
++
++ /* use fixed settings */
++ switch (pdata->speed) {
++ case SPEED_10:
++ case SPEED_100:
++ case SPEED_1000:
++ break;
++ default:
++ printk(KERN_ERR "%s: invalid speed specified\n",
++ dev->name);
++ ret = -EINVAL;
++ break;
++ }
++
++ return ret;
++}
++
++static int ag71xx_phy_connect_multi(struct ag71xx *ag)
++{
++ struct net_device *dev = ag->dev;
++ struct ag71xx_platform_data *pdata = ag71xx_get_pdata(ag);
++ struct phy_device *phydev = NULL;
++ int phy_count = 0;
++ int phy_addr;
++ int ret = 0;
++
++ for (phy_addr = 0; phy_addr < PHY_MAX_ADDR; phy_addr++) {
++ if (!(pdata->phy_mask & (1 << phy_addr)))
++ continue;
++
++ if (ag->mii_bus->phy_map[phy_addr] == NULL)
++ continue;
++
++ DBG("%s: PHY found at %s, uid=%08x\n",
++ dev->name,
++ ag->mii_bus->phy_map[phy_addr]->dev.bus_id,
++ ag->mii_bus->phy_map[phy_addr]->phy_id);
++
++ if (phydev == NULL)
++ phydev = ag->mii_bus->phy_map[phy_addr];
++
++ phy_count++;
++ }
++
++ switch (phy_count) {
++ case 0:
++ printk(KERN_ERR "%s: no PHY found with phy_mask=%08x\n",
++ dev->name, pdata->phy_mask);
++ ret = -ENODEV;
++ break;
++ case 1:
++ ag->phy_dev = phy_connect(dev, phydev->dev.bus_id,
++ &ag71xx_phy_link_adjust, 0, pdata->phy_if_mode);
++
++ if (IS_ERR(ag->phy_dev)) {
++ printk(KERN_ERR "%s: could not connect to PHY at %s\n",
++ dev->name, phydev->dev.bus_id);
++ return PTR_ERR(ag->phy_dev);
++ }
++
++ /* mask with MAC supported features */
++ if (pdata->has_gbit)
++ phydev->supported &= PHY_GBIT_FEATURES;
++ else
++ phydev->supported &= PHY_BASIC_FEATURES;
++
++ phydev->advertising = phydev->supported;
++
++ printk(KERN_DEBUG "%s: connected to PHY at %s "
++ "[uid=%08x, driver=%s]\n",
++ dev->name, phydev->dev.bus_id,
++ phydev->phy_id, phydev->drv->name);
++
++ ag->link = 0;
++ ag->speed = 0;
++ ag->duplex = -1;
++ break;
++
++ default:
++ printk(KERN_DEBUG "%s: connected to %d PHYs\n",
++ dev->name, phy_count);
++ ret = ag71xx_phy_connect_fixed(ag);
++ break;
++ }
++
++ return ret;
++}
++
++int ag71xx_phy_connect(struct ag71xx *ag)
++{
++ struct ag71xx_platform_data *pdata = ag71xx_get_pdata(ag);
++
++ if (pdata->phy_mask)
++ return ag71xx_phy_connect_multi(ag);
++
++ return ag71xx_phy_connect_fixed(ag);
++}
++
++void ag71xx_phy_disconnect(struct ag71xx *ag)
++{
++ if (ag->phy_dev)
++ phy_disconnect(ag->phy_dev);
++}
+diff -Nur linux-2.6.29.1.orig/drivers/net/phy/micrel.c linux-2.6.29.1/drivers/net/phy/micrel.c
+--- linux-2.6.29.1.orig/drivers/net/phy/micrel.c 1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.29.1/drivers/net/phy/micrel.c 2009-04-13 14:27:34.831085671 +0200
+@@ -0,0 +1,82 @@
++/*
++ * Driver for Micrel/Kendin PHYs
++ *
++ * Copyright (c) 2008-2009 Gabor Juhos <juhosg@openwrt.org>
++ * Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org>
++ *
++ * This program is free software; you can redistribute it and/or modify it
++ * under the terms of the GNU General Public License version 2 as published
++ * by the Free Software Foundation.
++ *
++ */
++
++#include <linux/delay.h>
++#include <linux/skbuff.h>
++#include <linux/phy.h>
++
++#define KSZ_REG_INT_CTRL 0x1b
++
++#define KSZ_INT_LU_EN (1 << 8) /* enable Link Up interrupt */
++#define KSZ_INT_RF_EN (1 << 9) /* enable Remote Fault interrupt */
++#define KSZ_INT_LD_EN (1 << 10) /* enable Link Down interrupt */
++
++#define KSZ_INT_INIT (KSZ_INT_LU_EN | KSZ_INT_LD_EN)
++
++static int ksz8041_ack_interrupt(struct phy_device *phydev)
++{
++ int err;
++
++ err = phy_read(phydev, KSZ_REG_INT_CTRL);
++
++ return (err < 0) ? err : 0;
++}
++
++static int ksz8041_config_intr(struct phy_device *phydev)
++{
++ int err;
++
++ if (phydev->interrupts == PHY_INTERRUPT_ENABLED)
++ err = phy_write(phydev, KSZ_REG_INT_CTRL,
++ KSZ_INT_INIT);
++ else
++ err = phy_write(phydev, KSZ_REG_INT_CTRL, 0);
++
++ return err;
++}
++
++static struct phy_driver ksz8041_phy_driver = {
++ .phy_id = 0x00221512,
++ .name = "Micrel KSZ8041",
++ .phy_id_mask = 0x001fffff,
++ .features = PHY_BASIC_FEATURES,
++ .flags = PHY_HAS_INTERRUPT,
++ .config_aneg = genphy_config_aneg,
++ .read_status = genphy_read_status,
++ .ack_interrupt = ksz8041_ack_interrupt,
++ .config_intr = ksz8041_config_intr,
++ .driver = {
++ .owner = THIS_MODULE,
++ },
++};
++
++static int __init micrel_phy_init(void)
++{
++ return phy_driver_register(&ksz8041_phy_driver);
++}
++
++static void __exit micrel_phy_exit(void)
++{
++ phy_driver_unregister(&ksz8041_phy_driver);
++}
++
++#ifdef MODULE
++module_init(micrel_phy_init);
++module_exit(micrel_phy_exit);
++#else
++subsys_initcall(micrel_phy_init);
++#endif
++
++MODULE_DESCRIPTION("Micrel/Kendin PHY driver");
++MODULE_AUTHOR("Gabor Juhos <juhosg@openwrt.org>");
++MODULE_AUTHOR("Imre Kaloz <kaloz@openwrt.org>");
++MODULE_LICENSE("GPL v2");
+diff -Nur linux-2.6.29.1.orig/drivers/net/phy/phy.c linux-2.6.29.1/drivers/net/phy/phy.c
+--- linux-2.6.29.1.orig/drivers/net/phy/phy.c 2009-04-02 22:55:27.000000000 +0200
++++ linux-2.6.29.1/drivers/net/phy/phy.c 2009-04-13 17:29:36.946673592 +0200
+@@ -299,6 +299,50 @@
+ }
+ EXPORT_SYMBOL(phy_ethtool_gset);
+
++int phy_ethtool_ioctl(struct phy_device *phydev, void *useraddr)
++{
++ u32 cmd;
++ int tmp;
++ struct ethtool_cmd ecmd = { ETHTOOL_GSET };
++ struct ethtool_value edata = { ETHTOOL_GLINK };
++
++ if (get_user(cmd, (u32 *) useraddr))
++ return -EFAULT;
++
++ switch (cmd) {
++ case ETHTOOL_GSET:
++ phy_ethtool_gset(phydev, &ecmd);
++ if (copy_to_user(useraddr, &ecmd, sizeof(ecmd)))
++ return -EFAULT;
++ return 0;
++
++ case ETHTOOL_SSET:
++ if (copy_from_user(&ecmd, useraddr, sizeof(ecmd)))
++ return -EFAULT;
++ return phy_ethtool_sset(phydev, &ecmd);
++
++ case ETHTOOL_NWAY_RST:
++ /* if autoneg is off, it's an error */
++ tmp = phy_read(phydev, MII_BMCR);
++ if (tmp & BMCR_ANENABLE) {
++ tmp |= (BMCR_ANRESTART);
++ phy_write(phydev, MII_BMCR, tmp);
++ return 0;
++ }
++ return -EINVAL;
++
++ case ETHTOOL_GLINK:
++ edata.data = (phy_read(phydev,
++ MII_BMSR) & BMSR_LSTATUS) ? 1 : 0;
++ if (copy_to_user(useraddr, &edata, sizeof(edata)))
++ return -EFAULT;
++ return 0;
++ }
++
++ return -EOPNOTSUPP;
++}
++EXPORT_SYMBOL(phy_ethtool_ioctl);
++
+ /**
+ * phy_mii_ioctl - generic PHY MII ioctl interface
+ * @phydev: the phy_device struct
+@@ -355,8 +399,8 @@
+ }
+
+ phy_write(phydev, mii_data->reg_num, val);
+-
+- if (mii_data->reg_num == MII_BMCR
++
++ if (mii_data->reg_num == MII_BMCR
+ && val & BMCR_RESET
+ && phydev->drv->config_init) {
+ phy_scan_fixups(phydev);
+@@ -476,7 +520,7 @@
+ int idx;
+
+ idx = phy_find_setting(phydev->speed, phydev->duplex);
+-
++
+ idx++;
+
+ idx = phy_find_valid(idx, phydev->supported);
+diff -Nur linux-2.6.29.1.orig/drivers/spi/Kconfig linux-2.6.29.1/drivers/spi/Kconfig
+--- linux-2.6.29.1.orig/drivers/spi/Kconfig 2009-04-02 22:55:27.000000000 +0200
++++ linux-2.6.29.1/drivers/spi/Kconfig 2009-04-13 14:27:34.831085671 +0200
+@@ -53,6 +53,13 @@
+
+ comment "SPI Master Controller Drivers"
+
++config SPI_AR71XX
++ tristate "Atheros AR71xx SPI Controller"
++ depends on SPI_MASTER && ATHEROS_AR71XX
++ select SPI_BITBANG
++ help
++ This is the SPI contoller driver for Atheros AR71xx.
++
+ config SPI_ATMEL
+ tristate "Atmel SPI Controller"
+ depends on (ARCH_AT91 || AVR32)
+diff -Nur linux-2.6.29.1.orig/drivers/spi/Makefile linux-2.6.29.1/drivers/spi/Makefile
+--- linux-2.6.29.1.orig/drivers/spi/Makefile 2009-04-02 22:55:27.000000000 +0200
++++ linux-2.6.29.1/drivers/spi/Makefile 2009-04-13 14:27:34.835086738 +0200
+@@ -11,6 +11,7 @@
+ obj-$(CONFIG_SPI_MASTER) += spi.o
+
+ # SPI master controller drivers (bus)
++obj-$(CONFIG_SPI_AR71XX) += ar71xx_spi.o
+ obj-$(CONFIG_SPI_ATMEL) += atmel_spi.o
+ obj-$(CONFIG_SPI_BFIN) += spi_bfin5xx.o
+ obj-$(CONFIG_SPI_BITBANG) += spi_bitbang.o
+diff -Nur linux-2.6.29.1.orig/drivers/spi/ar71xx_spi.c linux-2.6.29.1/drivers/spi/ar71xx_spi.c
+--- linux-2.6.29.1.orig/drivers/spi/ar71xx_spi.c 1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.29.1/drivers/spi/ar71xx_spi.c 2009-04-13 14:27:34.855087329 +0200
+@@ -0,0 +1,240 @@
++/*
++ * Atheros AR71xx SPI Controller driver
++ *
++ * Copyright (C) 2008 Gabor Juhos <juhosg@openwrt.org>
++ * Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org>
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License version 2 as
++ * published by the Free Software Foundation.
++ *
++ */
++
++#include <linux/kernel.h>
++#include <linux/init.h>
++#include <linux/delay.h>
++#include <linux/spinlock.h>
++#include <linux/workqueue.h>
++#include <linux/platform_device.h>
++#include <linux/io.h>
++#include <linux/spi/spi.h>
++#include <linux/spi/spi_bitbang.h>
++#include <linux/bitops.h>
++
++#include <asm/mach-ar71xx/ar71xx.h>
++#include <asm/mach-ar71xx/platform.h>
++
++#define DRV_DESC "Atheros AR71xx SPI Controller driver"
++#define DRV_VERSION "0.2.2"
++#define DRV_NAME "ar71xx-spi"
++
++#undef PER_BIT_READ
++
++struct ar71xx_spi {
++ struct spi_bitbang bitbang;
++ u32 ioc_base;
++ u32 reg_ctrl;
++
++ void __iomem *base;
++
++ struct platform_device *pdev;
++ u32 (*get_ioc_base)(u8 chip_select, int cs_high,
++ int is_on);
++};
++
++static inline u32 ar71xx_spi_rr(struct ar71xx_spi *sp, unsigned reg)
++{
++ return __raw_readl(sp->base + reg);
++}
++
++static inline void ar71xx_spi_wr(struct ar71xx_spi *sp, unsigned reg, u32 val)
++{
++ __raw_writel(val, sp->base + reg);
++}
++
++static inline struct ar71xx_spi *spidev_to_sp(struct spi_device *spi)
++{
++ return spi_master_get_devdata(spi->master);
++}
++
++static u32 ar71xx_spi_get_ioc_base(u8 chip_select, int cs_high, int is_on)
++{
++ u32 ret;
++
++ if (is_on == AR71XX_SPI_CS_INACTIVE)
++ ret = SPI_IOC_CS_ALL;
++ else
++ ret = SPI_IOC_CS_ALL & ~SPI_IOC_CS(chip_select);
++
++ return ret;
++}
++
++static void ar71xx_spi_chipselect(struct spi_device *spi, int value)
++{
++ struct ar71xx_spi *sp = spidev_to_sp(spi);
++ void __iomem *base = sp->base;
++ u32 ioc_base;
++
++ switch (value) {
++ case BITBANG_CS_INACTIVE:
++ ioc_base = sp->get_ioc_base(spi->chip_select,
++ (spi->mode & SPI_CS_HIGH) != 0,
++ AR71XX_SPI_CS_INACTIVE);
++
++ __raw_writel(ioc_base, base + SPI_REG_IOC);
++ __raw_writel(sp->reg_ctrl, base + SPI_REG_CTRL);
++ __raw_writel(0, base + SPI_REG_FS);
++ break;
++
++ case BITBANG_CS_ACTIVE:
++ ioc_base = sp->get_ioc_base(spi->chip_select,
++ (spi->mode & SPI_CS_HIGH) != 0,
++ AR71XX_SPI_CS_ACTIVE);
++
++ __raw_writel(SPI_FS_GPIO, base + SPI_REG_FS);
++ /* TODO: setup speed */
++ __raw_writel(0x43, base + SPI_REG_CTRL);
++ __raw_writel(ioc_base, base + SPI_REG_IOC);
++ sp->ioc_base = ioc_base;
++ break;
++ }
++}
++
++static u32 ar71xx_spi_txrx_mode0(struct spi_device *spi, unsigned nsecs,
++ u32 word, u8 bits)
++{
++ struct ar71xx_spi *sp = spidev_to_sp(spi);
++ void __iomem *base = sp->base;
++ u32 ioc = sp->ioc_base;
++ u32 ret;
++
++ /* clock starts at inactive polarity */
++ for (word <<= (32 - bits); likely(bits); bits--) {
++ u32 out;
++
++ if (word & (1 << 31))
++ out = ioc | SPI_IOC_DO;
++ else
++ out = ioc & ~SPI_IOC_DO;
++
++ /* setup MSB (to slave) on trailing edge */
++ __raw_writel(out, base + SPI_REG_IOC);
++
++ __raw_writel(out | SPI_IOC_CLK, base + SPI_REG_IOC);
++
++ word <<= 1;
++
++#ifdef PER_BIT_READ
++ /* sample MSB (from slave) on leading edge */
++ ret = __raw_readl(base + SPI_REG_RDS);
++ __raw_writel(out, base + SPI_REG_IOC);
++#endif
++
++ }
++
++#ifndef PER_BIT_READ
++ ret = __raw_readl(base + SPI_REG_RDS);
++#endif
++ return ret;
++}
++
++static int ar71xx_spi_probe(struct platform_device *pdev)
++{
++ struct spi_master *master;
++ struct ar71xx_spi *sp;
++ struct ar71xx_spi_platform_data *pdata;
++ struct resource *r;
++ int ret;
++
++ master = spi_alloc_master(&pdev->dev, sizeof(*sp));
++ if (master == NULL) {
++ dev_err(&pdev->dev, "failed to allocate spi master\n");
++ return -ENOMEM;
++ }
++
++ sp = spi_master_get_devdata(master);
++ platform_set_drvdata(pdev, sp);
++
++ pdata = pdev->dev.platform_data;
++
++ sp->bitbang.master = spi_master_get(master);
++ sp->bitbang.chipselect = ar71xx_spi_chipselect;
++ sp->bitbang.txrx_word[SPI_MODE_0] = ar71xx_spi_txrx_mode0;
++
++ sp->get_ioc_base = ar71xx_spi_get_ioc_base;
++ if (pdata) {
++ sp->bitbang.master->bus_num = pdata->bus_num;
++ sp->bitbang.master->num_chipselect = pdata->num_chipselect;
++ if (pdata->get_ioc_base)
++ sp->get_ioc_base = pdata->get_ioc_base;
++ } else {
++ sp->bitbang.master->bus_num = 0;
++ sp->bitbang.master->num_chipselect = 3;
++ }
++
++ r = platform_get_resource(pdev, IORESOURCE_MEM, 0);
++ if (r == NULL) {
++ ret = -ENOENT;
++ goto err1;
++ }
++
++ sp->base = ioremap_nocache(r->start, r->end - r->start + 1);
++ if (!sp->base) {
++ ret = -ENXIO;
++ goto err1;
++ }
++
++ sp->reg_ctrl = ar71xx_spi_rr(sp, SPI_REG_IOC);
++
++ ret = spi_bitbang_start(&sp->bitbang);
++ if (!ret)
++ return 0;
++
++ iounmap(sp->base);
++err1:
++ platform_set_drvdata(pdev, NULL);
++ spi_master_put(sp->bitbang.master);
++
++ return ret;
++}
++
++static int ar71xx_spi_remove(struct platform_device *pdev)
++{
++ struct ar71xx_spi *sp = platform_get_drvdata(pdev);
++
++ spi_bitbang_stop(&sp->bitbang);
++ iounmap(sp->base);
++ platform_set_drvdata(pdev, NULL);
++ spi_master_put(sp->bitbang.master);
++
++ return 0;
++}
++
++static struct platform_driver ar71xx_spi_drv = {
++ .probe = ar71xx_spi_probe,
++ .remove = ar71xx_spi_remove,
++ .driver = {
++ .name = DRV_NAME,
++ .owner = THIS_MODULE,
++ },
++};
++
++static int __init ar71xx_spi_init(void)
++{
++ printk(KERN_INFO DRV_DESC " version " DRV_VERSION "\n");
++ return platform_driver_register(&ar71xx_spi_drv);
++}
++module_init(ar71xx_spi_init);
++
++static void __exit ar71xx_spi_exit(void)
++{
++ platform_driver_unregister(&ar71xx_spi_drv);
++}
++module_exit(ar71xx_spi_exit);
++
++MODULE_ALIAS("platform:" DRV_NAME);
++MODULE_DESCRIPTION(DRV_DESC);
++MODULE_VERSION(DRV_VERSION);
++MODULE_AUTHOR("Gabor Juhos <juhosg@openwrt.org>");
++MODULE_AUTHOR("Imre Kaloz <kaloz@openwrt.org>");
++MODULE_LICENSE("GPL v2");
+diff -Nur linux-2.6.29.1.orig/drivers/usb/host/Kconfig linux-2.6.29.1/drivers/usb/host/Kconfig
+--- linux-2.6.29.1.orig/drivers/usb/host/Kconfig 2009-04-02 22:55:27.000000000 +0200
++++ linux-2.6.29.1/drivers/usb/host/Kconfig 2009-04-13 14:27:34.855087329 +0200
+@@ -81,6 +81,12 @@
+ depends on USB_EHCI_HCD && (440EPX || ARCH_IXP4XX)
+ default y
+
++config USB_EHCI_AR71XX
++ bool "USB EHCI support for AR71xx"
++ depends on USB_EHCI_HCD && ATHEROS_AR71XX
++ help
++ Support for Atheros AR71xx built-in EHCI controller
++
+ config USB_EHCI_FSL
+ bool "Support for Freescale on-chip EHCI USB controller"
+ depends on USB_EHCI_HCD && FSL_SOC
+@@ -154,6 +160,12 @@
+ To compile this driver as a module, choose M here: the
+ module will be called ohci-hcd.
+
++config USB_OHCI_AR71XX
++ bool "USB OHCI support for Atheros AR71xx"
++ depends on USB_OHCI_HCD && ATHEROS_AR71XX
++ help
++ Support for Atheros AR71xx built-in OHCI controller
++
+ config USB_OHCI_HCD_PPC_SOC
+ bool "OHCI support for on-chip PPC USB controller"
+ depends on USB_OHCI_HCD && (STB03xxx || PPC_MPC52xx)
+diff -Nur linux-2.6.29.1.orig/drivers/usb/host/ehci-ar71xx.c linux-2.6.29.1/drivers/usb/host/ehci-ar71xx.c
+--- linux-2.6.29.1.orig/drivers/usb/host/ehci-ar71xx.c 1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.29.1/drivers/usb/host/ehci-ar71xx.c 2009-04-13 14:27:34.859087838 +0200
+@@ -0,0 +1,235 @@
++/*
++ * Bus Glue for Atheros AR71xx built-in EHCI controller.
++ *
++ * Copyright (C) 2008 Gabor Juhos <juhosg@openwrt.org>
++ * Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org>
++ *
++ * Parts of this file are based on Atheros' 2.6.15 BSP
++ * Copyright (C) 2007 Atheros Communications, Inc.
++ *
++ * This program is free software; you can redistribute it and/or modify it
++ * under the terms of the GNU General Public License version 2 as published
++ * by the Free Software Foundation.
++ */
++
++#include <linux/platform_device.h>
++#include <linux/delay.h>
++
++#include <asm/mach-ar71xx/platform.h>
++
++extern int usb_disabled(void);
++
++static int ehci_ar71xx_init(struct usb_hcd *hcd)
++{
++ struct ehci_hcd *ehci = hcd_to_ehci(hcd);
++ int ret;
++
++ ehci->caps = hcd->regs;
++ ehci->regs = hcd->regs +
++ HC_LENGTH(ehci_readl(ehci, &ehci->caps->hc_capbase));
++ ehci->hcs_params = ehci_readl(ehci, &ehci->caps->hcs_params);
++
++ ehci->sbrn = 0x20;
++
++ ehci_reset(ehci);
++
++ ret = ehci_init(hcd);
++ if (ret)
++ return ret;
++
++ ehci_port_power(ehci, 0);
++
++ return 0;
++}
++
++static int ehci_ar91xx_init(struct usb_hcd *hcd)
++{
++ struct ehci_hcd *ehci = hcd_to_ehci(hcd);
++ int ret;
++
++ ehci->caps = hcd->regs + 0x100;
++ ehci->regs = hcd->regs + 0x100 +
++ HC_LENGTH(ehci_readl(ehci, &ehci->caps->hc_capbase));
++ ehci->hcs_params = ehci_readl(ehci, &ehci->caps->hcs_params);
++
++ hcd->has_tt = 1;
++ ehci->sbrn = 0x20;
++
++ ehci_reset(ehci);
++
++ ret = ehci_init(hcd);
++ if (ret)
++ return ret;
++
++ ehci_port_power(ehci, 0);
++
++ return 0;
++}
++
++static int ehci_ar71xx_probe(const struct hc_driver *driver,
++ struct usb_hcd **hcd_out,
++ struct platform_device *pdev)
++{
++ struct usb_hcd *hcd;
++ struct resource *res;
++ int irq;
++ int ret;
++
++ res = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
++ if (!res) {
++ dev_dbg(&pdev->dev, "no IRQ specified for %s\n",
++ pdev->dev.bus_id);
++ return -ENODEV;
++ }
++ irq = res->start;
++
++ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
++ if (!res) {
++ dev_dbg(&pdev->dev, "no base address specified for %s\n",
++ pdev->dev.bus_id);
++ return -ENODEV;
++ }
++
++ hcd = usb_create_hcd(driver, &pdev->dev, pdev->dev.bus_id);
++ if (!hcd)
++ return -ENOMEM;
++
++ hcd->rsrc_start = res->start;
++ hcd->rsrc_len = res->end - res->start + 1;
++
++ if (!request_mem_region(hcd->rsrc_start, hcd->rsrc_len, hcd_name)) {
++ dev_dbg(&pdev->dev, "controller already in use\n");
++ ret = -EBUSY;
++ goto err_put_hcd;
++ }
++
++ hcd->regs = ioremap(hcd->rsrc_start, hcd->rsrc_len);
++ if (!hcd->regs) {
++ dev_dbg(&pdev->dev, "error mapping memory\n");
++ ret = -EFAULT;
++ goto err_release_region;
++ }
++
++ ret = usb_add_hcd(hcd, irq, IRQF_DISABLED | IRQF_SHARED);
++ if (ret)
++ goto err_iounmap;
++
++ return 0;
++
++ err_iounmap:
++ iounmap(hcd->regs);
++
++ err_release_region:
++ release_mem_region(hcd->rsrc_start, hcd->rsrc_len);
++ err_put_hcd:
++ usb_put_hcd(hcd);
++ return ret;
++}
++
++static void ehci_ar71xx_remove(struct usb_hcd *hcd,
++ struct platform_device *pdev)
++{
++ usb_remove_hcd(hcd);
++ iounmap(hcd->regs);
++ release_mem_region(hcd->rsrc_start, hcd->rsrc_len);
++ usb_put_hcd(hcd);
++}
++
++static const struct hc_driver ehci_ar71xx_hc_driver = {
++ .description = hcd_name,
++ .product_desc = "Atheros AR71xx built-in EHCI controller",
++ .hcd_priv_size = sizeof(struct ehci_hcd),
++
++ .irq = ehci_irq,
++ .flags = HCD_MEMORY | HCD_USB2,
++
++ .reset = ehci_ar71xx_init,
++ .start = ehci_run,
++ .stop = ehci_stop,
++ .shutdown = ehci_shutdown,
++
++ .urb_enqueue = ehci_urb_enqueue,
++ .urb_dequeue = ehci_urb_dequeue,
++ .endpoint_disable = ehci_endpoint_disable,
++
++ .get_frame_number = ehci_get_frame,
++
++ .hub_status_data = ehci_hub_status_data,
++ .hub_control = ehci_hub_control,
++#ifdef CONFIG_PM
++ .hub_suspend = ehci_hub_suspend,
++ .hub_resume = ehci_hub_resume,
++#endif
++ .relinquish_port = ehci_relinquish_port,
++ .port_handed_over = ehci_port_handed_over,
++};
++
++static const struct hc_driver ehci_ar91xx_hc_driver = {
++ .description = hcd_name,
++ .product_desc = "Atheros AR91xx built-in EHCI controller",
++ .hcd_priv_size = sizeof(struct ehci_hcd),
++ .irq = ehci_irq,
++ .flags = HCD_MEMORY | HCD_USB2,
++
++ .reset = ehci_ar91xx_init,
++ .start = ehci_run,
++ .stop = ehci_stop,
++ .shutdown = ehci_shutdown,
++
++ .urb_enqueue = ehci_urb_enqueue,
++ .urb_dequeue = ehci_urb_dequeue,
++ .endpoint_disable = ehci_endpoint_disable,
++
++ .get_frame_number = ehci_get_frame,
++
++ .hub_status_data = ehci_hub_status_data,
++ .hub_control = ehci_hub_control,
++#ifdef CONFIG_PM
++ .hub_suspend = ehci_hub_suspend,
++ .hub_resume = ehci_hub_resume,
++#endif
++ .relinquish_port = ehci_relinquish_port,
++ .port_handed_over = ehci_port_handed_over,
++};
++
++static int ehci_ar71xx_driver_probe(struct platform_device *pdev)
++{
++ struct ar71xx_ehci_platform_data *pdata;
++ struct usb_hcd *hcd = NULL;
++ int ret;
++
++ if (usb_disabled())
++ return -ENODEV;
++
++ pdata = pdev->dev.platform_data;
++ if (!pdata) {
++ dev_err(&pdev->dev, "no platform data specified for %s\n",
++ pdev->dev.bus_id);
++ return -ENODEV;
++ }
++
++ if (pdata->is_ar91xx)
++ ret = ehci_ar71xx_probe(&ehci_ar91xx_hc_driver, &hcd, pdev);
++ else
++ ret = ehci_ar71xx_probe(&ehci_ar71xx_hc_driver, &hcd, pdev);
++
++ return ret;
++}
++
++static int ehci_ar71xx_driver_remove(struct platform_device *pdev)
++{
++ struct usb_hcd *hcd = platform_get_drvdata(pdev);
++
++ ehci_ar71xx_remove(hcd, pdev);
++ return 0;
++}
++
++MODULE_ALIAS("platform:ar71xx-ehci");
++
++static struct platform_driver ehci_ar71xx_driver = {
++ .probe = ehci_ar71xx_driver_probe,
++ .remove = ehci_ar71xx_driver_remove,
++ .driver = {
++ .name = "ar71xx-ehci",
++ }
++};
+diff -Nur linux-2.6.29.1.orig/drivers/usb/host/ehci-hcd.c linux-2.6.29.1/drivers/usb/host/ehci-hcd.c
+--- linux-2.6.29.1.orig/drivers/usb/host/ehci-hcd.c 2009-04-02 22:55:27.000000000 +0200
++++ linux-2.6.29.1/drivers/usb/host/ehci-hcd.c 2009-04-13 14:27:34.859087838 +0200
+@@ -1036,6 +1036,11 @@
+ #define PLATFORM_DRIVER ixp4xx_ehci_driver
+ #endif
+
++#ifdef CONFIG_USB_EHCI_AR71XX
++#include "ehci-ar71xx.c"
++#define PLATFORM_DRIVER ehci_ar71xx_driver
++#endif
++
+ #if !defined(PCI_DRIVER) && !defined(PLATFORM_DRIVER) && \
+ !defined(PS3_SYSTEM_BUS_DRIVER) && !defined(OF_PLATFORM_DRIVER)
+ #error "missing bus glue for ehci-hcd"
+diff -Nur linux-2.6.29.1.orig/drivers/usb/host/ohci-ar71xx.c linux-2.6.29.1/drivers/usb/host/ohci-ar71xx.c
+--- linux-2.6.29.1.orig/drivers/usb/host/ohci-ar71xx.c 1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.29.1/drivers/usb/host/ohci-ar71xx.c 2009-04-13 14:27:34.887088611 +0200
+@@ -0,0 +1,165 @@
++/*
++ * OHCI HCD (Host Controller Driver) for USB.
++ *
++ * Bus Glue for Atheros AR71xx built-in OHCI controller.
++ *
++ * Copyright (C) 2008 Gabor Juhos <juhosg@openwrt.org>
++ * Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org>
++ *
++ * Parts of this file are based on Atheros' 2.6.15 BSP
++ * Copyright (C) 2007 Atheros Communications, Inc.
++ *
++ * This program is free software; you can redistribute it and/or modify it
++ * under the terms of the GNU General Public License version 2 as published
++ * by the Free Software Foundation.
++ */
++
++#include <linux/platform_device.h>
++#include <linux/delay.h>
++
++extern int usb_disabled(void);
++
++static int usb_hcd_ar71xx_probe(const struct hc_driver *driver,
++ struct platform_device *pdev)
++{
++ struct usb_hcd *hcd;
++ struct resource *res;
++ int irq;
++ int ret;
++
++ res = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
++ if (!res) {
++ dev_dbg(&pdev->dev, "no IRQ specified for %s\n",
++ pdev->dev.bus_id);
++ return -ENODEV;
++ }
++ irq = res->start;
++
++ hcd = usb_create_hcd(driver, &pdev->dev, pdev->dev.bus_id);
++ if (!hcd)
++ return -ENOMEM;
++
++ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
++ if (!res) {
++ dev_dbg(&pdev->dev, "no base address specified for %s\n",
++ pdev->dev.bus_id);
++ ret = -ENODEV;
++ goto err_put_hcd;
++ }
++ hcd->rsrc_start = res->start;
++ hcd->rsrc_len = res->end - res->start + 1;
++
++ if (!request_mem_region(hcd->rsrc_start, hcd->rsrc_len, hcd_name)) {
++ dev_dbg(&pdev->dev, "controller already in use\n");
++ ret = -EBUSY;
++ goto err_put_hcd;
++ }
++
++ hcd->regs = ioremap(hcd->rsrc_start, hcd->rsrc_len);
++ if (!hcd->regs) {
++ dev_dbg(&pdev->dev, "error mapping memory\n");
++ ret = -EFAULT;
++ goto err_release_region;
++ }
++
++ ohci_hcd_init(hcd_to_ohci(hcd));
++
++ ret = usb_add_hcd(hcd, irq, IRQF_DISABLED);
++ if (ret)
++ goto err_stop_hcd;
++
++ return 0;
++
++ err_stop_hcd:
++ iounmap(hcd->regs);
++ err_release_region:
++ release_mem_region(hcd->rsrc_start, hcd->rsrc_len);
++ err_put_hcd:
++ usb_put_hcd(hcd);
++ return ret;
++}
++
++void usb_hcd_ar71xx_remove(struct usb_hcd *hcd, struct platform_device *pdev)
++{
++ usb_remove_hcd(hcd);
++ iounmap(hcd->regs);
++ release_mem_region(hcd->rsrc_start, hcd->rsrc_len);
++ usb_put_hcd(hcd);
++}
++
++static int __devinit ohci_ar71xx_start(struct usb_hcd *hcd)
++{
++ struct ohci_hcd *ohci = hcd_to_ohci(hcd);
++ int ret;
++
++ ret = ohci_init(ohci);
++ if (ret < 0)
++ return ret;
++
++ ret = ohci_run(ohci);
++ if (ret < 0)
++ goto err;
++
++ return 0;
++
++ err:
++ ohci_stop(hcd);
++ return ret;
++}
++
++static const struct hc_driver ohci_ar71xx_hc_driver = {
++ .description = hcd_name,
++ .product_desc = "Atheros AR71xx built-in OHCI controller",
++ .hcd_priv_size = sizeof(struct ohci_hcd),
++
++ .irq = ohci_irq,
++ .flags = HCD_USB11 | HCD_MEMORY,
++
++ .start = ohci_ar71xx_start,
++ .stop = ohci_stop,
++ .shutdown = ohci_shutdown,
++
++ .urb_enqueue = ohci_urb_enqueue,
++ .urb_dequeue = ohci_urb_dequeue,
++ .endpoint_disable = ohci_endpoint_disable,
++
++ /*
++ * scheduling support
++ */
++ .get_frame_number = ohci_get_frame,
++
++ /*
++ * root hub support
++ */
++ .hub_status_data = ohci_hub_status_data,
++ .hub_control = ohci_hub_control,
++ .start_port_reset = ohci_start_port_reset,
++};
++
++static int ohci_hcd_ar71xx_drv_probe(struct platform_device *pdev)
++{
++ if (usb_disabled())
++ return -ENODEV;
++
++ return usb_hcd_ar71xx_probe(&ohci_ar71xx_hc_driver, pdev);
++}
++
++static int ohci_hcd_ar71xx_drv_remove(struct platform_device *pdev)
++{
++ struct usb_hcd *hcd = platform_get_drvdata(pdev);
++
++ usb_hcd_ar71xx_remove(hcd, pdev);
++ return 0;
++}
++
++MODULE_ALIAS("platform:ar71xx-ohci");
++
++static struct platform_driver ohci_hcd_ar71xx_driver = {
++ .probe = ohci_hcd_ar71xx_drv_probe,
++ .remove = ohci_hcd_ar71xx_drv_remove,
++ .shutdown = usb_hcd_platform_shutdown,
++ .driver = {
++ .name = "ar71xx-ohci",
++ .owner = THIS_MODULE,
++ },
++};
+diff -Nur linux-2.6.29.1.orig/drivers/usb/host/ohci-hcd.c linux-2.6.29.1/drivers/usb/host/ohci-hcd.c
+--- linux-2.6.29.1.orig/drivers/usb/host/ohci-hcd.c 2009-04-02 22:55:27.000000000 +0200
++++ linux-2.6.29.1/drivers/usb/host/ohci-hcd.c 2009-04-13 14:27:34.887088611 +0200
+@@ -1080,6 +1080,11 @@
+ #define TMIO_OHCI_DRIVER ohci_hcd_tmio_driver
+ #endif
+
++#ifdef CONFIG_USB_OHCI_AR71XX
++#include "ohci-ar71xx.c"
++#define PLATFORM_DRIVER ohci_hcd_ar71xx_driver
++#endif
++
+ #if !defined(PCI_DRIVER) && \
+ !defined(PLATFORM_DRIVER) && \
+ !defined(OF_PLATFORM_DRIVER) && \
+diff -Nur linux-2.6.29.1.orig/drivers/watchdog/Kconfig linux-2.6.29.1/drivers/watchdog/Kconfig
+--- linux-2.6.29.1.orig/drivers/watchdog/Kconfig 2009-04-02 22:55:27.000000000 +0200
++++ linux-2.6.29.1/drivers/watchdog/Kconfig 2009-04-13 14:27:34.891089680 +0200
+@@ -766,6 +766,13 @@
+ help
+ Hardware driver for the built-in watchdog timer on TXx9 MIPS SoCs.
+
++config AR71XX_WDT
++ tristate "Atheros AR71xx Watchdog Timer"
++ depends on ATHEROS_AR71XX
++ help
++ Hardware driver for the built-in watchdog timer on the Atheros
++ AR71xx SoCs.
++
+ # PARISC Architecture
+
+ # POWERPC Architecture
+diff -Nur linux-2.6.29.1.orig/drivers/watchdog/Makefile linux-2.6.29.1/drivers/watchdog/Makefile
+--- linux-2.6.29.1.orig/drivers/watchdog/Makefile 2009-04-02 22:55:27.000000000 +0200
++++ linux-2.6.29.1/drivers/watchdog/Makefile 2009-04-13 14:27:34.891089680 +0200
+@@ -107,6 +107,7 @@
+ obj-$(CONFIG_SIBYTE_WDOG) += sb_wdog.o
+ obj-$(CONFIG_AR7_WDT) += ar7_wdt.o
+ obj-$(CONFIG_TXX9_WDT) += txx9wdt.o
++obj-$(CONFIG_AR71XX_WDT) += ar71xx_wdt.o
+
+ # PARISC Architecture
+
+diff -Nur linux-2.6.29.1.orig/drivers/watchdog/ar71xx_wdt.c linux-2.6.29.1/drivers/watchdog/ar71xx_wdt.c
+--- linux-2.6.29.1.orig/drivers/watchdog/ar71xx_wdt.c 1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.29.1/drivers/watchdog/ar71xx_wdt.c 2009-04-13 14:27:34.915091622 +0200
+@@ -0,0 +1,270 @@
++/*
++ * Driver for the Atheros AR71xx SoC's built-in hardware watchdog timer.
++ *
++ * Copyright (C) 2008 Gabor Juhos <juhosg@openwrt.org>
++ * Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org>
++ *
++ * This driver was based on: drivers/watchdog/ixp4xx_wdt.c
++ * Author: Deepak Saxena <dsaxena@plexity.net>
++ * Copyright 2004 (c) MontaVista, Software, Inc.
++ *
++ * which again was based on sa1100 driver,
++ * Copyright (C) 2000 Oleg Drokin <green@crimea.edu>
++ *
++ * This program is free software; you can redistribute it and/or modify it
++ * under the terms of the GNU General Public License version 2 as published
++ * by the Free Software Foundation.
++ *
++ */
++
++#include <linux/bitops.h>
++#include <linux/errno.h>
++#include <linux/fs.h>
++#include <linux/init.h>
++#include <linux/kernel.h>
++#include <linux/miscdevice.h>
++#include <linux/module.h>
++#include <linux/moduleparam.h>
++#include <linux/platform_device.h>
++#include <linux/types.h>
++#include <linux/watchdog.h>
++
++#include <asm/mach-ar71xx/ar71xx.h>
++
++#define DRV_NAME "ar71xx-wdt"
++#define DRV_DESC "Atheros AR71xx hardware watchdog driver"
++#define DRV_VERSION "0.1.0"
++
++#define WDT_TIMEOUT 15 /* seconds */
++
++static int nowayout = WATCHDOG_NOWAYOUT;
++
++#ifdef CONFIG_WATCHDOG_NOWAYOUT
++module_param(nowayout, int, 0);
++MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started "
++ "(default=" __MODULE_STRING(WATCHDOG_NOWAYOUT) ")");
++#endif
++
++static unsigned long wdt_flags;
++
++#define WDT_FLAGS_BUSY 0
++#define WDT_FLAGS_EXPECT_CLOSE 1
++
++static int wdt_timeout = WDT_TIMEOUT;
++static int boot_status;
++static int max_timeout;
++
++static void inline ar71xx_wdt_keepalive(void)
++{
++ ar71xx_reset_wr(AR71XX_RESET_REG_WDOG, ar71xx_ahb_freq * wdt_timeout);
++}
++
++static void inline ar71xx_wdt_enable(void)
++{
++ printk(KERN_DEBUG DRV_NAME ": enabling watchdog timer\n");
++ ar71xx_wdt_keepalive();
++ ar71xx_reset_wr(AR71XX_RESET_REG_WDOG_CTRL, WDOG_CTRL_ACTION_FCR);
++}
++
++static void inline ar71xx_wdt_disable(void)
++{
++ printk(KERN_DEBUG DRV_NAME ": disabling watchdog timer\n");
++ ar71xx_reset_wr(AR71XX_RESET_REG_WDOG_CTRL, WDOG_CTRL_ACTION_NONE);
++}
++
++static int ar71xx_wdt_set_timeout(int val)
++{
++ if (val < 1 || val > max_timeout)
++ return -EINVAL;
++
++ wdt_timeout = val;
++ ar71xx_wdt_keepalive();
++
++ printk(KERN_DEBUG DRV_NAME ": timeout=%d secs\n", wdt_timeout);
++
++ return 0;
++}
++
++static int ar71xx_wdt_open(struct inode *inode, struct file *file)
++{
++ if (test_and_set_bit(WDT_FLAGS_BUSY, &wdt_flags))
++ return -EBUSY;
++
++ clear_bit(WDT_FLAGS_EXPECT_CLOSE, &wdt_flags);
++
++ ar71xx_wdt_enable();
++
++ return nonseekable_open(inode, file);
++}
++
++static int ar71xx_wdt_release(struct inode *inode, struct file *file)
++{
++ if (test_bit(WDT_FLAGS_EXPECT_CLOSE, &wdt_flags)) {
++ ar71xx_wdt_disable();
++ } else {
++ printk(KERN_CRIT DRV_NAME ": device closed unexpectedly, "
++ "watchdog timer will not stop!\n");
++ }
++
++ clear_bit(WDT_FLAGS_BUSY, &wdt_flags);
++ clear_bit(WDT_FLAGS_EXPECT_CLOSE, &wdt_flags);
++
++ return 0;
++}
++
++static ssize_t ar71xx_wdt_write(struct file *file, const char *data,
++ size_t len, loff_t *ppos)
++{
++ if (len) {
++ if (!nowayout) {
++ size_t i;
++
++ clear_bit(WDT_FLAGS_EXPECT_CLOSE, &wdt_flags);
++
++ for (i = 0; i != len; i++) {
++ char c;
++
++ if (get_user(c, data + i))
++ return -EFAULT;
++
++ if (c == 'V')
++ set_bit(WDT_FLAGS_EXPECT_CLOSE,
++ &wdt_flags);
++ }
++ }
++
++ ar71xx_wdt_keepalive();
++ }
++
++ return len;
++}
++
++static struct watchdog_info ar71xx_wdt_info = {
++ .options = WDIOF_SETTIMEOUT | WDIOF_KEEPALIVEPING |
++ WDIOF_MAGICCLOSE | WDIOF_CARDRESET,
++ .firmware_version = 0,
++ .identity = "AR71XX watchdog",
++};
++
++static int ar71xx_wdt_ioctl(struct inode *inode, struct file *file,
++ unsigned int cmd, unsigned long arg)
++{
++ int t;
++ int ret;
++
++ switch (cmd) {
++ case WDIOC_GETSUPPORT:
++ ret = copy_to_user((struct watchdog_info *)arg,
++ &ar71xx_wdt_info,
++ sizeof(&ar71xx_wdt_info)) ? -EFAULT : 0;
++ break;
++
++ case WDIOC_GETSTATUS:
++ ret = put_user(0, (int *)arg) ? -EFAULT : 0;
++ break;
++
++ case WDIOC_GETBOOTSTATUS:
++ ret = put_user(boot_status, (int *)arg) ? -EFAULT : 0;
++ break;
++
++ case WDIOC_KEEPALIVE:
++ ar71xx_wdt_keepalive();
++ ret = 0;
++ break;
++
++ case WDIOC_SETTIMEOUT:
++ ret = get_user(t, (int *)arg) ? -EFAULT : 0;
++ if (ret)
++ break;
++
++ ret = ar71xx_wdt_set_timeout(t);
++ if (ret)
++ break;
++
++ /* fallthrough */
++ case WDIOC_GETTIMEOUT:
++ ret = put_user(wdt_timeout, (int *)arg) ? -EFAULT : 0;
++ break;
++
++ default:
++ ret = -ENOTTY;
++ break;
++ }
++
++ return ret;
++}
++
++static const struct file_operations ar71xx_wdt_fops = {
++ .owner = THIS_MODULE,
++ .write = ar71xx_wdt_write,
++ .ioctl = ar71xx_wdt_ioctl,
++ .open = ar71xx_wdt_open,
++ .release = ar71xx_wdt_release,
++};
++
++static struct miscdevice ar71xx_wdt_miscdev = {
++ .minor = WATCHDOG_MINOR,
++ .name = "watchdog",
++ .fops = &ar71xx_wdt_fops,
++};
++
++static int __devinit ar71xx_wdt_probe(struct platform_device *pdev)
++{
++ int ret;
++
++ max_timeout = (0xfffffffful / ar71xx_ahb_freq);
++ wdt_timeout = (max_timeout < WDT_TIMEOUT) ? max_timeout : WDT_TIMEOUT;
++
++ boot_status =
++ (ar71xx_reset_rr(AR71XX_RESET_REG_WDOG_CTRL) & WDOG_CTRL_LAST_RESET) ?
++ WDIOF_CARDRESET : 0;
++
++ ret = misc_register(&ar71xx_wdt_miscdev);
++ if (ret)
++ goto err_out;
++
++ printk(KERN_INFO DRV_DESC " version " DRV_VERSION "\n");
++
++ printk(KERN_DEBUG DRV_NAME ": timeout=%d secs (max=%d)\n",
++ wdt_timeout, max_timeout);
++
++ return 0;
++
++err_out:
++ return ret;
++}
++
++static int __devexit ar71xx_wdt_remove(struct platform_device *pdev)
++{
++ misc_deregister(&ar71xx_wdt_miscdev);
++ return 0;
++}
++
++static struct platform_driver ar71xx_wdt_driver = {
++ .probe = ar71xx_wdt_probe,
++ .remove = __devexit_p(ar71xx_wdt_remove),
++ .driver = {
++ .name = DRV_NAME,
++ .owner = THIS_MODULE,
++ },
++};
++
++static int __init ar71xx_wdt_init(void)
++{
++ return platform_driver_register(&ar71xx_wdt_driver);
++}
++module_init(ar71xx_wdt_init);
++
++static void __exit ar71xx_wdt_exit(void)
++{
++ platform_driver_unregister(&ar71xx_wdt_driver);
++}
++module_exit(ar71xx_wdt_exit);
++
++MODULE_DESCRIPTION(DRV_DESC);
++MODULE_VERSION(DRV_VERSION);
++MODULE_AUTHOR("Gabor Juhos <juhosg@openwrt.org");
++MODULE_AUTHOR("Imre Kaloz <kaloz@openwrt.org");
++MODULE_LICENSE("GPL v2");
++MODULE_ALIAS("platform:" DRV_NAME);
++MODULE_ALIAS_MISCDEV(WATCHDOG_MINOR);
+diff -Nur linux-2.6.29.1.orig/include/asm-mips/mips_machine.h linux-2.6.29.1/include/asm-mips/mips_machine.h
+--- linux-2.6.29.1.orig/include/asm-mips/mips_machine.h 1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.29.1/include/asm-mips/mips_machine.h 2009-04-13 14:27:34.915091622 +0200
+@@ -0,0 +1,47 @@
++/*
++ * Copyright (C) 2008 Gabor Juhos <juhosg@openwrt.org>
++ *
++ * This program is free software; you can redistribute it and/or modify it
++ * under the terms of the GNU General Public License version 2 as published
++ * by the Free Software Foundation.
++ *
++ */
++
++#ifndef __ASM_MIPS_MACHINE_H
++#define __ASM_MIPS_MACHINE_H
++
++#include <linux/init.h>
++#include <linux/list.h>
++
++#define MIPS_MACHINE_NAME_LEN 64
++
++struct mips_machine {
++ unsigned long mach_type;
++ void (*mach_setup)(void);
++ unsigned char mach_name[MIPS_MACHINE_NAME_LEN];
++ struct list_head list;
++};
++
++void mips_machine_register(struct mips_machine *) __init;
++void mips_machine_setup(unsigned long machtype) __init;
++
++extern unsigned char mips_machine_name[MIPS_MACHINE_NAME_LEN];
++
++#define MIPS_MACHINE(_type, _name, _setup) \
++static struct mips_machine machine_##_type __initdata = \
++{ \
++ .mach_type = _type, \
++ .mach_name = _name, \
++ .mach_setup = _setup, \
++}; \
++ \
++static int __init register_machine_##_type(void) \
++{ \
++ mips_machine_register(&machine_##_type); \
++ return 0; \
++} \
++ \
++pure_initcall(register_machine_##_type)
++
++#endif /* __ASM_MIPS_MACHINE_H */
++
+diff -Nur linux-2.6.29.1.orig/include/linux/ath9k_platform.h linux-2.6.29.1/include/linux/ath9k_platform.h
+--- linux-2.6.29.1.orig/include/linux/ath9k_platform.h 1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.29.1/include/linux/ath9k_platform.h 2009-04-13 14:27:34.915091622 +0200
+@@ -0,0 +1,20 @@
++/*
++ * ath9k platform data defines
++ *
++ * Copyright (C) 2008 Gabor Juhos <juhosg@openwrt.org>
++ *
++ * This program is free software; you can redistribute it and/or modify it
++ * under the terms of the GNU General Public License version 2 as published
++ * by the Free Software Foundation.
++ */
++
++#ifndef _LINUX_ATH9K_PLATFORM_H
++#define _LINUX_ATH9L_PLATFORM_H
++
++#define ATH9K_PLAT_EEP_MAX_WORDS 2048
++
++struct ath9k_platform_data {
++ u16 eeprom_data[ATH9K_PLAT_EEP_MAX_WORDS];
++};
++
++#endif /* _LINUX_ATH9K_PLATFORM_H */
+diff -Nur linux-2.6.29.1.orig/include/linux/gpio_buttons.h linux-2.6.29.1/include/linux/gpio_buttons.h
+--- linux-2.6.29.1.orig/include/linux/gpio_buttons.h 1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.29.1/include/linux/gpio_buttons.h 2009-04-13 14:27:34.919091574 +0200
+@@ -0,0 +1,35 @@
++/*
++ * Definitions for the GPIO buttons interface driver
++ *
++ * Copyright (C) 2007,2008 Gabor Juhos <juhosg at openwrt.org>
++ *
++ * This file was based on: /include/linux/gpio_keys.h
++ * The original gpio_keys.h seems not to have a license.
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License version 2 as
++ * published by the Free Software Foundation.
++ *
++ */
++
++#ifndef _GPIO_BUTTONS_H_
++#define _GPIO_BUTTONS_H_
++
++struct gpio_button {
++ int gpio; /* GPIO line number */
++ int active_low;
++ char *desc; /* button description */
++ int type; /* input event type (EV_KEY, EV_SW) */
++ int code; /* input event code (KEY_*, SW_*) */
++ int count;
++ int threshold; /* count threshold */
++};
++
++struct gpio_buttons_platform_data {
++ struct gpio_button *buttons;
++ int nbuttons; /* number of buttons */
++ int poll_interval; /* polling interval */
++};
++
++#endif /* _GPIO_BUTTONS_H_ */
++
+diff -Nur linux-2.6.29.1.orig/include/linux/phy.h linux-2.6.29.1/include/linux/phy.h
+--- linux-2.6.29.1.orig/include/linux/phy.h 2009-04-02 22:55:27.000000000 +0200
++++ linux-2.6.29.1/include/linux/phy.h 2009-04-13 17:29:37.057990291 +0200
+@@ -478,6 +478,7 @@
+ void phy_stop_machine(struct phy_device *phydev);
+ int phy_ethtool_sset(struct phy_device *phydev, struct ethtool_cmd *cmd);
+ int phy_ethtool_gset(struct phy_device *phydev, struct ethtool_cmd *cmd);
++int phy_ethtool_ioctl(struct phy_device *phydev, void *useraddr);
+ int phy_mii_ioctl(struct phy_device *phydev,
+ struct mii_ioctl_data *mii_data, int cmd);
+ int phy_start_interrupts(struct phy_device *phydev);
+diff -Nur linux-2.6.29.1.orig/include/linux/phy.h.orig linux-2.6.29.1/include/linux/phy.h.orig
+--- linux-2.6.29.1.orig/include/linux/phy.h.orig 1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.29.1/include/linux/phy.h.orig 2009-04-02 22:55:27.000000000 +0200
+@@ -0,0 +1,500 @@
++/*
++ * include/linux/phy.h
++ *
++ * Framework and drivers for configuring and reading different PHYs
++ * Based on code in sungem_phy.c and gianfar_phy.c
++ *
++ * Author: Andy Fleming
++ *
++ * Copyright (c) 2004 Freescale Semiconductor, Inc.
++ *
++ * This program is free software; you can redistribute it and/or modify it
++ * under the terms of the GNU General Public License as published by the
++ * Free Software Foundation; either version 2 of the License, or (at your
++ * option) any later version.
++ *
++ */
++
++#ifndef __PHY_H
++#define __PHY_H
++
++#include <linux/spinlock.h>
++#include <linux/device.h>
++#include <linux/ethtool.h>
++#include <linux/mii.h>
++#include <linux/timer.h>
++#include <linux/workqueue.h>
++
++#include <asm/atomic.h>
++
++#define PHY_BASIC_FEATURES (SUPPORTED_10baseT_Half | \
++ SUPPORTED_10baseT_Full | \
++ SUPPORTED_100baseT_Half | \
++ SUPPORTED_100baseT_Full | \
++ SUPPORTED_Autoneg | \
++ SUPPORTED_TP | \
++ SUPPORTED_MII)
++
++#define PHY_GBIT_FEATURES (PHY_BASIC_FEATURES | \
++ SUPPORTED_1000baseT_Half | \
++ SUPPORTED_1000baseT_Full)
++
++/*
++ * Set phydev->irq to PHY_POLL if interrupts are not supported,
++ * or not desired for this PHY. Set to PHY_IGNORE_INTERRUPT if
++ * the attached driver handles the interrupt
++ */
++#define PHY_POLL -1
++#define PHY_IGNORE_INTERRUPT -2
++
++#define PHY_HAS_INTERRUPT 0x00000001
++#define PHY_HAS_MAGICANEG 0x00000002
++
++/* Interface Mode definitions */
++typedef enum {
++ PHY_INTERFACE_MODE_MII,
++ PHY_INTERFACE_MODE_GMII,
++ PHY_INTERFACE_MODE_SGMII,
++ PHY_INTERFACE_MODE_TBI,
++ PHY_INTERFACE_MODE_RMII,
++ PHY_INTERFACE_MODE_RGMII,
++ PHY_INTERFACE_MODE_RGMII_ID,
++ PHY_INTERFACE_MODE_RGMII_RXID,
++ PHY_INTERFACE_MODE_RGMII_TXID,
++ PHY_INTERFACE_MODE_RTBI
++} phy_interface_t;
++
++
++#define PHY_INIT_TIMEOUT 100000
++#define PHY_STATE_TIME 1
++#define PHY_FORCE_TIMEOUT 10
++#define PHY_AN_TIMEOUT 10
++
++#define PHY_MAX_ADDR 32
++
++/* Used when trying to connect to a specific phy (mii bus id:phy device id) */
++#define PHY_ID_FMT "%s:%02x"
++
++/*
++ * Need to be a little smaller than phydev->dev.bus_id to leave room
++ * for the ":%02x"
++ */
++#define MII_BUS_ID_SIZE (BUS_ID_SIZE - 3)
++
++/*
++ * The Bus class for PHYs. Devices which provide access to
++ * PHYs should register using this structure
++ */
++struct mii_bus {
++ const char *name;
++ char id[MII_BUS_ID_SIZE];
++ void *priv;
++ int (*read)(struct mii_bus *bus, int phy_id, int regnum);
++ int (*write)(struct mii_bus *bus, int phy_id, int regnum, u16 val);
++ int (*reset)(struct mii_bus *bus);
++
++ /*
++ * A lock to ensure that only one thing can read/write
++ * the MDIO bus at a time
++ */
++ struct mutex mdio_lock;
++
++ struct device *parent;
++ enum {
++ MDIOBUS_ALLOCATED = 1,
++ MDIOBUS_REGISTERED,
++ MDIOBUS_UNREGISTERED,
++ MDIOBUS_RELEASED,
++ } state;
++ struct device dev;
++
++ /* list of all PHYs on bus */
++ struct phy_device *phy_map[PHY_MAX_ADDR];
++
++ /* Phy addresses to be ignored when probing */
++ u32 phy_mask;
++
++ /*
++ * Pointer to an array of interrupts, each PHY's
++ * interrupt at the index matching its address
++ */
++ int *irq;
++};
++#define to_mii_bus(d) container_of(d, struct mii_bus, dev)
++
++struct mii_bus *mdiobus_alloc(void);
++int mdiobus_register(struct mii_bus *bus);
++void mdiobus_unregister(struct mii_bus *bus);
++void mdiobus_free(struct mii_bus *bus);
++struct phy_device *mdiobus_scan(struct mii_bus *bus, int addr);
++int mdiobus_read(struct mii_bus *bus, int addr, u16 regnum);
++int mdiobus_write(struct mii_bus *bus, int addr, u16 regnum, u16 val);
++
++
++#define PHY_INTERRUPT_DISABLED 0x0
++#define PHY_INTERRUPT_ENABLED 0x80000000
++
++/* PHY state machine states:
++ *
++ * DOWN: PHY device and driver are not ready for anything. probe
++ * should be called if and only if the PHY is in this state,
++ * given that the PHY device exists.
++ * - PHY driver probe function will, depending on the PHY, set
++ * the state to STARTING or READY
++ *
++ * STARTING: PHY device is coming up, and the ethernet driver is
++ * not ready. PHY drivers may set this in the probe function.
++ * If they do, they are responsible for making sure the state is
++ * eventually set to indicate whether the PHY is UP or READY,
++ * depending on the state when the PHY is done starting up.
++ * - PHY driver will set the state to READY
++ * - start will set the state to PENDING
++ *
++ * READY: PHY is ready to send and receive packets, but the
++ * controller is not. By default, PHYs which do not implement
++ * probe will be set to this state by phy_probe(). If the PHY
++ * driver knows the PHY is ready, and the PHY state is STARTING,
++ * then it sets this STATE.
++ * - start will set the state to UP
++ *
++ * PENDING: PHY device is coming up, but the ethernet driver is
++ * ready. phy_start will set this state if the PHY state is
++ * STARTING.
++ * - PHY driver will set the state to UP when the PHY is ready
++ *
++ * UP: The PHY and attached device are ready to do work.
++ * Interrupts should be started here.
++ * - timer moves to AN
++ *
++ * AN: The PHY is currently negotiating the link state. Link is
++ * therefore down for now. phy_timer will set this state when it
++ * detects the state is UP. config_aneg will set this state
++ * whenever called with phydev->autoneg set to AUTONEG_ENABLE.
++ * - If autonegotiation finishes, but there's no link, it sets
++ * the state to NOLINK.
++ * - If aneg finishes with link, it sets the state to RUNNING,
++ * and calls adjust_link
++ * - If autonegotiation did not finish after an arbitrary amount
++ * of time, autonegotiation should be tried again if the PHY
++ * supports "magic" autonegotiation (back to AN)
++ * - If it didn't finish, and no magic_aneg, move to FORCING.
++ *
++ * NOLINK: PHY is up, but not currently plugged in.
++ * - If the timer notes that the link comes back, we move to RUNNING
++ * - config_aneg moves to AN
++ * - phy_stop moves to HALTED
++ *
++ * FORCING: PHY is being configured with forced settings
++ * - if link is up, move to RUNNING
++ * - If link is down, we drop to the next highest setting, and
++ * retry (FORCING) after a timeout
++ * - phy_stop moves to HALTED
++ *
++ * RUNNING: PHY is currently up, running, and possibly sending
++ * and/or receiving packets
++ * - timer will set CHANGELINK if we're polling (this ensures the
++ * link state is polled every other cycle of this state machine,
++ * which makes it every other second)
++ * - irq will set CHANGELINK
++ * - config_aneg will set AN
++ * - phy_stop moves to HALTED
++ *
++ * CHANGELINK: PHY experienced a change in link state
++ * - timer moves to RUNNING if link
++ * - timer moves to NOLINK if the link is down
++ * - phy_stop moves to HALTED
++ *
++ * HALTED: PHY is up, but no polling or interrupts are done. Or
++ * PHY is in an error state.
++ *
++ * - phy_start moves to RESUMING
++ *
++ * RESUMING: PHY was halted, but now wants to run again.
++ * - If we are forcing, or aneg is done, timer moves to RUNNING
++ * - If aneg is not done, timer moves to AN
++ * - phy_stop moves to HALTED
++ */
++enum phy_state {
++ PHY_DOWN=0,
++ PHY_STARTING,
++ PHY_READY,
++ PHY_PENDING,
++ PHY_UP,
++ PHY_AN,
++ PHY_RUNNING,
++ PHY_NOLINK,
++ PHY_FORCING,
++ PHY_CHANGELINK,
++ PHY_HALTED,
++ PHY_RESUMING
++};
++
++/* phy_device: An instance of a PHY
++ *
++ * drv: Pointer to the driver for this PHY instance
++ * bus: Pointer to the bus this PHY is on
++ * dev: driver model device structure for this PHY
++ * phy_id: UID for this device found during discovery
++ * state: state of the PHY for management purposes
++ * dev_flags: Device-specific flags used by the PHY driver.
++ * addr: Bus address of PHY
++ * link_timeout: The number of timer firings to wait before the
++ * giving up on the current attempt at acquiring a link
++ * irq: IRQ number of the PHY's interrupt (-1 if none)
++ * phy_timer: The timer for handling the state machine
++ * phy_queue: A work_queue for the interrupt
++ * attached_dev: The attached enet driver's device instance ptr
++ * adjust_link: Callback for the enet controller to respond to
++ * changes in the link state.
++ * adjust_state: Callback for the enet driver to respond to
++ * changes in the state machine.
++ *
++ * speed, duplex, pause, supported, advertising, and
++ * autoneg are used like in mii_if_info
++ *
++ * interrupts currently only supports enabled or disabled,
++ * but could be changed in the future to support enabling
++ * and disabling specific interrupts
++ *
++ * Contains some infrastructure for polling and interrupt
++ * handling, as well as handling shifts in PHY hardware state
++ */
++struct phy_device {
++ /* Information about the PHY type */
++ /* And management functions */
++ struct phy_driver *drv;
++
++ struct mii_bus *bus;
++
++ struct device dev;
++
++ u32 phy_id;
++
++ enum phy_state state;
++
++ u32 dev_flags;
++
++ phy_interface_t interface;
++
++ /* Bus address of the PHY (0-32) */
++ int addr;
++
++ /*
++ * forced speed & duplex (no autoneg)
++ * partner speed & duplex & pause (autoneg)
++ */
++ int speed;
++ int duplex;
++ int pause;
++ int asym_pause;
++
++ /* The most recently read link state */
++ int link;
++
++ /* Enabled Interrupts */
++ u32 interrupts;
++
++ /* Union of PHY and Attached devices' supported modes */
++ /* See mii.h for more info */
++ u32 supported;
++ u32 advertising;
++
++ int autoneg;
++
++ int link_timeout;
++
++ /*
++ * Interrupt number for this PHY
++ * -1 means no interrupt
++ */
++ int irq;
++
++ /* private data pointer */
++ /* For use by PHYs to maintain extra state */
++ void *priv;
++
++ /* Interrupt and Polling infrastructure */
++ struct work_struct phy_queue;
++ struct work_struct state_queue;
++ struct timer_list phy_timer;
++ atomic_t irq_disable;
++
++ struct mutex lock;
++
++ struct net_device *attached_dev;
++
++ void (*adjust_link)(struct net_device *dev);
++
++ void (*adjust_state)(struct net_device *dev);
++};
++#define to_phy_device(d) container_of(d, struct phy_device, dev)
++
++/* struct phy_driver: Driver structure for a particular PHY type
++ *
++ * phy_id: The result of reading the UID registers of this PHY
++ * type, and ANDing them with the phy_id_mask. This driver
++ * only works for PHYs with IDs which match this field
++ * name: The friendly name of this PHY type
++ * phy_id_mask: Defines the important bits of the phy_id
++ * features: A list of features (speed, duplex, etc) supported
++ * by this PHY
++ * flags: A bitfield defining certain other features this PHY
++ * supports (like interrupts)
++ *
++ * The drivers must implement config_aneg and read_status. All
++ * other functions are optional. Note that none of these
++ * functions should be called from interrupt time. The goal is
++ * for the bus read/write functions to be able to block when the
++ * bus transaction is happening, and be freed up by an interrupt
++ * (The MPC85xx has this ability, though it is not currently
++ * supported in the driver).
++ */
++struct phy_driver {
++ u32 phy_id;
++ char *name;
++ unsigned int phy_id_mask;
++ u32 features;
++ u32 flags;
++
++ /*
++ * Called to initialize the PHY,
++ * including after a reset
++ */
++ int (*config_init)(struct phy_device *phydev);
++
++ /*
++ * Called during discovery. Used to set
++ * up device-specific structures, if any
++ */
++ int (*probe)(struct phy_device *phydev);
++
++ /* PHY Power Management */
++ int (*suspend)(struct phy_device *phydev);
++ int (*resume)(struct phy_device *phydev);
++
++ /*
++ * Configures the advertisement and resets
++ * autonegotiation if phydev->autoneg is on,
++ * forces the speed to the current settings in phydev
++ * if phydev->autoneg is off
++ */
++ int (*config_aneg)(struct phy_device *phydev);
++
++ /* Determines the negotiated speed and duplex */
++ int (*read_status)(struct phy_device *phydev);
++
++ /* Clears any pending interrupts */
++ int (*ack_interrupt)(struct phy_device *phydev);
++
++ /* Enables or disables interrupts */
++ int (*config_intr)(struct phy_device *phydev);
++
++ /* Clears up any memory if needed */
++ void (*remove)(struct phy_device *phydev);
++
++ struct device_driver driver;
++};
++#define to_phy_driver(d) container_of(d, struct phy_driver, driver)
++
++#define PHY_ANY_ID "MATCH ANY PHY"
++#define PHY_ANY_UID 0xffffffff
++
++/* A Structure for boards to register fixups with the PHY Lib */
++struct phy_fixup {
++ struct list_head list;
++ char bus_id[BUS_ID_SIZE];
++ u32 phy_uid;
++ u32 phy_uid_mask;
++ int (*run)(struct phy_device *phydev);
++};
++
++/**
++ * phy_read - Convenience function for reading a given PHY register
++ * @phydev: the phy_device struct
++ * @regnum: register number to read
++ *
++ * NOTE: MUST NOT be called from interrupt context,
++ * because the bus read/write functions may wait for an interrupt
++ * to conclude the operation.
++ */
++static inline int phy_read(struct phy_device *phydev, u16 regnum)
++{
++ return mdiobus_read(phydev->bus, phydev->addr, regnum);
++}
++
++/**
++ * phy_write - Convenience function for writing a given PHY register
++ * @phydev: the phy_device struct
++ * @regnum: register number to write
++ * @val: value to write to @regnum
++ *
++ * NOTE: MUST NOT be called from interrupt context,
++ * because the bus read/write functions may wait for an interrupt
++ * to conclude the operation.
++ */
++static inline int phy_write(struct phy_device *phydev, u16 regnum, u16 val)
++{
++ return mdiobus_write(phydev->bus, phydev->addr, regnum, val);
++}
++
++int get_phy_id(struct mii_bus *bus, int addr, u32 *phy_id);
++struct phy_device* get_phy_device(struct mii_bus *bus, int addr);
++int phy_clear_interrupt(struct phy_device *phydev);
++int phy_config_interrupt(struct phy_device *phydev, u32 interrupts);
++struct phy_device * phy_attach(struct net_device *dev,
++ const char *bus_id, u32 flags, phy_interface_t interface);
++struct phy_device * phy_connect(struct net_device *dev, const char *bus_id,
++ void (*handler)(struct net_device *), u32 flags,
++ phy_interface_t interface);
++void phy_disconnect(struct phy_device *phydev);
++void phy_detach(struct phy_device *phydev);
++void phy_start(struct phy_device *phydev);
++void phy_stop(struct phy_device *phydev);
++int phy_start_aneg(struct phy_device *phydev);
++
++void phy_sanitize_settings(struct phy_device *phydev);
++int phy_stop_interrupts(struct phy_device *phydev);
++int phy_enable_interrupts(struct phy_device *phydev);
++int phy_disable_interrupts(struct phy_device *phydev);
++
++static inline int phy_read_status(struct phy_device *phydev) {
++ return phydev->drv->read_status(phydev);
++}
++
++int genphy_config_advert(struct phy_device *phydev);
++int genphy_setup_forced(struct phy_device *phydev);
++int genphy_restart_aneg(struct phy_device *phydev);
++int genphy_config_aneg(struct phy_device *phydev);
++int genphy_update_link(struct phy_device *phydev);
++int genphy_read_status(struct phy_device *phydev);
++int genphy_suspend(struct phy_device *phydev);
++int genphy_resume(struct phy_device *phydev);
++void phy_driver_unregister(struct phy_driver *drv);
++int phy_driver_register(struct phy_driver *new_driver);
++void phy_prepare_link(struct phy_device *phydev,
++ void (*adjust_link)(struct net_device *));
++void phy_start_machine(struct phy_device *phydev,
++ void (*handler)(struct net_device *));
++void phy_stop_machine(struct phy_device *phydev);
++int phy_ethtool_sset(struct phy_device *phydev, struct ethtool_cmd *cmd);
++int phy_ethtool_gset(struct phy_device *phydev, struct ethtool_cmd *cmd);
++int phy_mii_ioctl(struct phy_device *phydev,
++ struct mii_ioctl_data *mii_data, int cmd);
++int phy_start_interrupts(struct phy_device *phydev);
++void phy_print_status(struct phy_device *phydev);
++struct phy_device* phy_device_create(struct mii_bus *bus, int addr, int phy_id);
++void phy_device_free(struct phy_device *phydev);
++
++int phy_register_fixup(const char *bus_id, u32 phy_uid, u32 phy_uid_mask,
++ int (*run)(struct phy_device *));
++int phy_register_fixup_for_id(const char *bus_id,
++ int (*run)(struct phy_device *));
++int phy_register_fixup_for_uid(u32 phy_uid, u32 phy_uid_mask,
++ int (*run)(struct phy_device *));
++int phy_scan_fixups(struct phy_device *phydev);
++
++int __init mdio_bus_init(void);
++void mdio_bus_exit(void);
++
++extern struct bus_type mdio_bus_type;
++#endif /* __PHY_H */