diff options
Diffstat (limited to 'target/linux')
| -rw-r--r-- | target/linux/Config.in | 1 | ||||
| -rw-r--r-- | target/linux/config/Config.in.block | 13 | ||||
| -rw-r--r-- | target/linux/config/Config.in.cpu | 21 | ||||
| -rw-r--r-- | target/linux/config/Config.in.flash | 3 | ||||
| -rw-r--r-- | target/linux/config/Config.in.graphics | 6 | ||||
| -rw-r--r-- | target/linux/config/Config.in.input | 10 | ||||
| -rw-r--r-- | target/linux/config/Config.in.kernel | 3 | ||||
| -rw-r--r-- | target/linux/config/Config.in.netdevice | 27 | ||||
| -rw-r--r-- | target/linux/config/Config.in.network | 2 | ||||
| -rw-r--r-- | target/linux/config/Config.in.pm | 6 | ||||
| -rw-r--r-- | target/linux/config/Config.in.sensors | 25 | ||||
| -rw-r--r-- | target/linux/config/Config.in.serial | 15 | ||||
| -rw-r--r-- | target/linux/config/Config.in.spi | 4 | ||||
| -rw-r--r-- | target/linux/config/Config.in.systems | 24 | ||||
| -rw-r--r-- | target/linux/config/Config.in.usb | 8 | ||||
| -rw-r--r-- | target/linux/patches/2.6.39/cris-etrax.patch | 12 | ||||
| -rw-r--r-- | target/linux/patches/2.6.39/mips-malta.patch | 135 | ||||
| -rw-r--r-- | target/linux/patches/2.6.39/rb4xx.patch | 7321 |
18 files changed, 2448 insertions, 5188 deletions
diff --git a/target/linux/Config.in b/target/linux/Config.in index 7b52a3003..1b78cecb5 100644 --- a/target/linux/Config.in +++ b/target/linux/Config.in @@ -20,6 +20,7 @@ source target/linux/config/Config.in.misc source target/linux/config/Config.in.mips source target/linux/config/Config.in.lib source target/linux/config/Config.in.pm +source target/linux/config/Config.in.serial source target/linux/config/Config.in.spi source target/linux/config/Config.in.kvm source target/linux/config/Config.in.debug diff --git a/target/linux/config/Config.in.block b/target/linux/config/Config.in.block index 78e7b1bd5..fe4c0a9c8 100644 --- a/target/linux/config/Config.in.block +++ b/target/linux/config/Config.in.block @@ -62,6 +62,9 @@ config ADK_KERNEL_MMC config ADK_KERNEL_MMC_BLOCK boolean +config ADK_KERNEL_SCSI_SYM53C8XX_2 + boolean + config ADK_KERNEL_MMC_AT91 boolean select ADK_KERNEL_BLOCK @@ -121,14 +124,16 @@ config ADK_KERNEL_ATA_PIIX select ADK_KERNEL_ATA_BMDMA select ADK_KERNEL_BLK_DEV select ADK_KERNEL_BLK_DEV_SD - default y if ADK_TARGET_SYSTEM_QEMU_MIPS64 - default y if ADK_TARGET_SYSTEM_QEMU_MIPS64EL + default y if ADK_TARGET_SYSTEM_QEMU_I686 default y if ADK_TARGET_SYSTEM_QEMU_MIPS default y if ADK_TARGET_SYSTEM_QEMU_MIPSEL - default y if ADK_TARGET_SYSTEM_QEMU_X86 + default y if ADK_TARGET_SYSTEM_QEMU_PPC + default y if ADK_TARGET_SYSTEM_QEMU_SPARC default y if ADK_TARGET_SYSTEM_QEMU_X86_64 default y if ADK_TARGET_SYSTEM_IBM_X40 default y if ADK_NATIVE_SYSTEM_IBM_X40 + default y if ADK_TARGET_SYSTEM_INTEL_ATOM + default y if ADK_NATIVE_SYSTEM_INTEL_ATOM default n config ADK_KERNEL_SATA_AHCI @@ -150,6 +155,8 @@ config ADK_KPACKAGE_KMOD_SATA_AHCI select ADK_KERNEL_BLK_DEV_SD depends on !ADK_KERNEL_SATA_AHCI depends on ADK_TARGET_WITH_SATA + default y if ADK_TARGET_SYSTEM_INTEL_ATOM + default y if ADK_NATIVE_SYSTEM_INTEL_ATOM default n help Enables support for AHCI Serial ATA. diff --git a/target/linux/config/Config.in.cpu b/target/linux/config/Config.in.cpu index 64d9e9f3f..5be6dacfc 100644 --- a/target/linux/config/Config.in.cpu +++ b/target/linux/config/Config.in.cpu @@ -11,3 +11,24 @@ config ADK_KERNEL_MTRR boolean default y if ADK_TARGET_CPU_WITH_MTRR default n + +# hyper threading +config ADK_KERNEL_PM_SLEEP_SMP + boolean + default y if ADK_TARGET_CPU_WITH_HT + default n + +config ADK_KERNEL_SMP + boolean + default y if ADK_TARGET_CPU_WITH_HT + default n + +config ADK_KERNEL_X86_HT + boolean + default y if ADK_TARGET_CPU_WITH_HT + default n + +config ADK_KERNEL_USE_GENERIC_SMP_HELPERS + boolean + default y if ADK_TARGET_CPU_WITH_HT + default n diff --git a/target/linux/config/Config.in.flash b/target/linux/config/Config.in.flash index 3e2898617..fb4f22221 100644 --- a/target/linux/config/Config.in.flash +++ b/target/linux/config/Config.in.flash @@ -1,5 +1,8 @@ config ADK_KERNEL_MTD boolean + +config ADK_KERNEL_MTD_MTDRAM + boolean config ADK_KERNEL_MTD_NAND boolean diff --git a/target/linux/config/Config.in.graphics b/target/linux/config/Config.in.graphics index 667593de9..5cbe307f0 100644 --- a/target/linux/config/Config.in.graphics +++ b/target/linux/config/Config.in.graphics @@ -3,6 +3,7 @@ config ADK_KERNEL_VT default y if ADK_HARDWARE_QEMU default y if ADK_TARGET_WITH_VGA default y if ADK_NATIVE_SYSTEM_IBM_X40 + default y if ADK_NATIVE_SYSTEM_INTEL_ATOM default n config ADK_KERNEL_VT_CONSOLE @@ -10,6 +11,7 @@ config ADK_KERNEL_VT_CONSOLE default y if ADK_HARDWARE_QEMU default y if ADK_TARGET_WITH_VGA default y if ADK_NATIVE_SYSTEM_IBM_X40 + default y if ADK_NATIVE_SYSTEM_INTEL_ATOM default n config ADK_KERNEL_FONTS @@ -71,7 +73,7 @@ config ADK_KERNEL_FB_SM7XX Framebuffer support for Lemote Yeelong. config ADK_HARDWARE_GRAPHICS_INTEL_I915 - prompt "................................ Support for Intel graphic cards (AGP/DRM/KMS)" + prompt "............................ Support for Intel graphic cards (AGP/DRM/KMS/NM10)" boolean select ADK_KERNEL_FB select ADK_KERNEL_DRM @@ -83,7 +85,7 @@ config ADK_HARDWARE_GRAPHICS_INTEL_I915 default y if ADK_TARGET_SYSTEM_IBM_X40 default y if ADK_NATIVE_SYSTEM_IBM_X40 default n - depends on ADK_TARGET_SYSTEM_IBM_X40 || ADK_NATIVE_SYSTEM_IBM_X40 + depends on ADK_TARGET_SYSTEM_IBM_X40 || ADK_NATIVE_SYSTEM_IBM_X40 || ADK_TARGET_SYSTEM_INTEL_ATOM || ADK_NATIVE_SYSTEM_INTEL_ATOM help AGP/DRM/KMS support for Intel chipset i915. diff --git a/target/linux/config/Config.in.input b/target/linux/config/Config.in.input index b8566e569..65524a0d3 100644 --- a/target/linux/config/Config.in.input +++ b/target/linux/config/Config.in.input @@ -6,6 +6,8 @@ config ADK_KERNEL_INPUT default y if ADK_TARGET_SYSTEM_PCENGINES_ALIX1C default y if ADK_TARGET_SYSTEM_IBM_X40 default y if ADK_NATIVE_SYSTEM_IBM_X40 + default y if ADK_TARGET_SYSTEM_INTEL_ATOM + default y if ADK_NATIVE_SYSTEM_INTEL_ATOM default y if ADK_TARGET_SYSTEM_LEMOTE_YEELONG default y if ADK_TARGET_SYSTEM_SHUTTLE_SA76G2 default n @@ -15,6 +17,8 @@ config ADK_KERNEL_INPUT_KEYBOARD default y if ADK_TARGET_SYSTEM_PCENGINES_ALIX1C default y if ADK_TARGET_SYSTEM_IBM_X40 default y if ADK_NATIVE_SYSTEM_IBM_X40 + default y if ADK_TARGET_SYSTEM_INTEL_ATOM + default y if ADK_NATIVE_SYSTEM_INTEL_ATOM default y if ADK_TARGET_SYSTEM_LEMOTE_YEELONG default y if ADK_TARGET_SYSTEM_SHUTTLE_SA76G2 default n @@ -24,6 +28,8 @@ config ADK_KERNEL_KEYBOARD_ATKBD default y if ADK_TARGET_SYSTEM_PCENGINES_ALIX1C default y if ADK_TARGET_SYSTEM_IBM_X40 default y if ADK_NATIVE_SYSTEM_IBM_X40 + default y if ADK_TARGET_SYSTEM_INTEL_ATOM + default y if ADK_NATIVE_SYSTEM_INTEL_ATOM default y if ADK_TARGET_SYSTEM_LEMOTE_YEELONG default y if ADK_TARGET_SYSTEM_SHUTTLE_SA76G2 default n @@ -33,6 +39,8 @@ config ADK_KERNEL_INPUT_MOUSE default y if ADK_TARGET_SYSTEM_PCENGINES_ALIX1C default y if ADK_TARGET_SYSTEM_IBM_X40 default y if ADK_NATIVE_SYSTEM_IBM_X40 + default y if ADK_TARGET_SYSTEM_INTEL_ATOM + default y if ADK_NATIVE_SYSTEM_INTEL_ATOM default y if ADK_TARGET_SYSTEM_LEMOTE_YEELONG default y if ADK_TARGET_SYSTEM_SHUTTLE_SA76G2 default n @@ -42,6 +50,8 @@ config ADK_KERNEL_INPUT_MOUSEDEV default y if ADK_TARGET_SYSTEM_PCENGINES_ALIX1C default y if ADK_TARGET_SYSTEM_IBM_X40 default y if ADK_NATIVE_SYSTEM_IBM_X40 + default y if ADK_TARGET_SYSTEM_INTEL_ATOM + default y if ADK_NATIVE_SYSTEM_INTEL_ATOM default y if ADK_TARGET_SYSTEM_LEMOTE_YEELONG default y if ADK_TARGET_SYSTEM_SHUTTLE_SA76G2 default n diff --git a/target/linux/config/Config.in.kernel b/target/linux/config/Config.in.kernel index 696f7afc9..1791a624a 100644 --- a/target/linux/config/Config.in.kernel +++ b/target/linux/config/Config.in.kernel @@ -85,3 +85,6 @@ config ADK_KERNEL_NFS_COMMON config ADK_KERNEL_SUNRPC boolean + +config ADK_KERNEL_PCI + boolean diff --git a/target/linux/config/Config.in.netdevice b/target/linux/config/Config.in.netdevice index d9a8cd9dc..b615156f9 100644 --- a/target/linux/config/Config.in.netdevice +++ b/target/linux/config/Config.in.netdevice @@ -22,6 +22,16 @@ config ADK_KERNEL_NETDEV_1000 config ADK_KERNEL_VIA_RHINE_MMIO boolean +config ADK_KERNEL_SMC91X + boolean + select ADK_KERNEL_NETDEVICES + select ADK_KERNEL_NET_ETHERNET + select ADK_KERNEL_NET_PCI + select ADK_KERNEL_MII + default y if ADK_TARGET_QEMU_ARM_MODEL_VERSATILE + default n + help + config ADK_KERNEL_CPMAC boolean select ADK_KERNEL_NETDEVICES @@ -42,6 +52,17 @@ config ADK_KERNEL_MACB default n help +config ADK_KERNEL_PCNET32 + boolean + select ADK_KERNEL_NETDEVICES + select ADK_KERNEL_NET_ETHERNET + select ADK_KERNEL_NET_PCI + select ADK_KERNEL_MII + default y if ADK_TARGET_SYSTEM_QEMU_MIPSEL + default y if ADK_TARGET_SYSTEM_QEMU_MIPS + default n + help + config ADK_KERNEL_NATSEMI boolean select ADK_KERNEL_NETDEVICES @@ -135,7 +156,7 @@ config ADK_KERNEL_E1000 select ADK_KERNEL_NETDEV_1000 default y if ADK_TARGET_SYSTEM_IBM_X40 default y if ADK_NATIVE_SYSTEM_IBM_X40 - default y if ADK_TARGET_SYSTEM_QEMU_X86 + default y if ADK_TARGET_SYSTEM_QEMU_I686 default y if ADK_TARGET_SYSTEM_QEMU_X86_64 default n help @@ -154,6 +175,8 @@ config ADK_KERNEL_R8169 select ADK_KERNEL_NETDEVICES select ADK_KERNEL_NET_ETHERNET select ADK_KERNEL_NETDEV_1000 + select ADK_KERNEL_MII + select ADK_KPACKAGE_KMOD_FW_LOADER default y if ADK_TARGET_SYSTEM_OVH_RPS default n help @@ -246,6 +269,8 @@ config ADK_KPACKAGE_KMOD_R8169 select ADK_KERNEL_NETDEVICES select ADK_KERNEL_NET_ETHERNET select ADK_KERNEL_NETDEV_1000 + select ADK_KERNEL_MII + select ADK_KPACKAGE_KMOD_FW_LOADER depends on !ADK_KERNEL_R8169 default n help diff --git a/target/linux/config/Config.in.network b/target/linux/config/Config.in.network index 6e4267857..2ec253111 100644 --- a/target/linux/config/Config.in.network +++ b/target/linux/config/Config.in.network @@ -158,7 +158,7 @@ config ADK_KPACKAGE_KMOD_NET_IPGRE config ADK_KPACKAGE_KMOD_IPV6 prompt "kmod-ipv6......................... IPv6 support" tristate - default n + default m help This is complemental support for the IP version 6. You will still be able to do traditional IPv4 networking as well. diff --git a/target/linux/config/Config.in.pm b/target/linux/config/Config.in.pm index 5ffd8aca9..4e35a12b2 100644 --- a/target/linux/config/Config.in.pm +++ b/target/linux/config/Config.in.pm @@ -36,6 +36,8 @@ config ADK_HARDWARE_ACPI select ADK_KERNEL_ACPI_BUTTON select ADK_KERNEL_ACPI_FAN select ADK_KERNEL_ACPI_DOCK + default y if ADK_TARGET_SYSTEM_INTEL_ATOM + default y if ADK_NATIVE_SYSTEM_INTEL_ATOM default y if ADK_TARGET_SYSTEM_IBM_X40 default y if ADK_NATIVE_SYSTEM_IBM_X40 default n @@ -46,6 +48,8 @@ config ADK_KERNEL_SUSPEND prompt "Enable Suspend-to-RAM support" boolean select ADK_KERNEL_PM + default y if ADK_TARGET_SYSTEM_INTEL_ATOM + default y if ADK_NATIVE_SYSTEM_INTEL_ATOM default y if ADK_TARGET_SYSTEM_IBM_X40 default y if ADK_NATIVE_SYSTEM_IBM_X40 default n @@ -58,6 +62,8 @@ config ADK_KERNEL_HIBERNATION select ADK_KERNEL_PM select ADK_KERNEL_SWAP select BUSYBOX_SWAPONOFF + default y if ADK_TARGET_SYSTEM_INTEL_ATOM + default y if ADK_NATIVE_SYSTEM_INTEL_ATOM default y if ADK_TARGET_SYSTEM_IBM_X40 default y if ADK_NATIVE_SYSTEM_IBM_X40 default n diff --git a/target/linux/config/Config.in.sensors b/target/linux/config/Config.in.sensors new file mode 100644 index 000000000..941913bbd --- /dev/null +++ b/target/linux/config/Config.in.sensors @@ -0,0 +1,25 @@ +menu "Sensors" + +config ADK_KERNEL_HWMON + boolean + +config ADK_KPACKAGE_KMOD_CORETEMP + prompt "kmod-coretemp..................... Coretemp" + boolean + select ADK_KERNEL_I2C + select ADK_KERNEL_I2C_CHARDEV + select ADK_KERNEL_HWMON + select ADK_KERNEL_EXPERIMENTAL + default n + help + Coretemp module + +config ADK_KPACKAGE_KMOD_IT87 + prompt "kmod-it87......................... it87" + boolean + default n + help + Module for IT87 smbus chipsets + +endmenu + diff --git a/target/linux/config/Config.in.serial b/target/linux/config/Config.in.serial new file mode 100644 index 000000000..adc25312d --- /dev/null +++ b/target/linux/config/Config.in.serial @@ -0,0 +1,15 @@ +config ADK_KERNEL_SERIAL_PXA + boolean + default y if ADK_TARGET_QEMU_ARM_MODEL_SPITZ + +config ADK_KERNEL_SERIAL_PXA_CONSOLE + boolean + default y if ADK_TARGET_QEMU_ARM_MODEL_SPITZ + +config ADK_KERNEL_SERIAL_AMBA_PL011 + boolean + default y if ADK_TARGET_QEMU_ARM_MODEL_VERSATILE + +config ADK_KERNEL_SERIAL_AMBA_PL011_CONSOLE + boolean + default y if ADK_TARGET_QEMU_ARM_MODEL_VERSATILE diff --git a/target/linux/config/Config.in.spi b/target/linux/config/Config.in.spi index a141f8231..73db5e86d 100644 --- a/target/linux/config/Config.in.spi +++ b/target/linux/config/Config.in.spi @@ -12,3 +12,7 @@ config ADK_KERNEL_SPI_RB4XX config ADK_KERNEL_SPI_RB4XX_CPLD select ADK_KERNEL_SPI boolean + +config ADK_KERNEL_SPI_PXA2XX + select ADK_KERNEL_SPI + boolean diff --git a/target/linux/config/Config.in.systems b/target/linux/config/Config.in.systems index 8750ac281..3e64caddc 100644 --- a/target/linux/config/Config.in.systems +++ b/target/linux/config/Config.in.systems @@ -1,3 +1,10 @@ +# page size +config ADK_KERNEL_PAGE_SIZE_4KB + boolean + +config ADK_KERNEL_PAGE_SIZE_16KB + boolean + # mips systems config ADK_KERNEL_ATHEROS_AR231X boolean @@ -28,6 +35,18 @@ config ADK_KERNEL_LEMOTE_MACH2F boolean # arm systems +config ADK_KERNEL_ARCH_VERSATILE + boolean + +config ADK_KERNEL_ARCH_PXA + boolean + +config ADK_KERNEL_PXA_SHARPSL + boolean + +config ADK_KERNEL_MACH_SPITZ + boolean + config ADK_KERNEL_ARCH_AT91 boolean @@ -37,6 +56,7 @@ config ADK_KERNEL_ARCH_AT91SAM9G20 config ADK_KERNEL_MACH_ACMENETUSFOXG20 boolean +# endianesss and ABI config ADK_KERNEL_AEABI boolean @@ -45,3 +65,7 @@ config ADK_KERNEL_CPU_BIG_ENDIAN config ADK_KERNEL_CPU_LITTLE_ENDIAN boolean + +# cris systems +config ADK_KERNEL_ETRAXFS + boolean diff --git a/target/linux/config/Config.in.usb b/target/linux/config/Config.in.usb index f16ef7dab..057fa1ffc 100644 --- a/target/linux/config/Config.in.usb +++ b/target/linux/config/Config.in.usb @@ -35,6 +35,8 @@ config ADK_KPACKAGE_KMOD_USB default y if ADK_TARGET_SYSTEM_PCENGINES_ALIX2D13 default y if ADK_TARGET_SYSTEM_IBM_X40 default y if ADK_NATIVE_SYSTEM_IBM_X40 + default y if ADK_TARGET_SYSTEM_INTEL_ATOM + default y if ADK_NATIVE_SYSTEM_INTEL_ATOM default y if ADK_TARGET_SYSTEM_LEMOTE_YEELONG default y if ADK_TARGET_SYSTEM_ACMESYSTEMS_FOXG20 default y if ADK_TARGET_SYSTEM_FOXBOARD_LX @@ -78,6 +80,8 @@ config ADK_KPACKAGE_KMOD_USB_UHCI_HCD depends on !ADK_TARGET_SYSTEM_FOXBOARD_LX default y if ADK_TARGET_SYSTEM_IBM_X40 default y if ADK_NATIVE_SYSTEM_IBM_X40 + default y if ADK_TARGET_SYSTEM_INTEL_ATOM + default y if ADK_NATIVE_SYSTEM_INTEL_ATOM default y if ADK_TARGET_SYSTEM_LEMOTE_YEELONG default n help @@ -101,6 +105,8 @@ config ADK_KPACKAGE_KMOD_USB_OHCI_HCD default y if ADK_TARGET_SYSTEM_PCENGINES_ALIX2D2 default y if ADK_TARGET_SYSTEM_PCENGINES_ALIX2D13 default y if ADK_TARGET_SYSTEM_ACMESYSTEMS_FOXG20 + default y if ADK_TARGET_SYSTEM_INTEL_ATOM + default y if ADK_NATIVE_SYSTEM_INTEL_ATOM default n help The Open Host Controller Interface (OHCI) is a standard for accessing @@ -152,6 +158,8 @@ config ADK_KPACKAGE_KMOD_USB_EHCI_HCD default y if ADK_TARGET_SYSTEM_PCENGINES_ALIX1C default y if ADK_TARGET_SYSTEM_PCENGINES_ALIX2D2 default y if ADK_TARGET_SYSTEM_PCENGINES_ALIX2D13 + default y if ADK_TARGET_SYSTEM_INTEL_ATOM + default y if ADK_NATIVE_SYSTEM_INTEL_ATOM default y if ADK_TARGET_SYSTEM_IBM_X40 default y if ADK_NATIVE_SYSTEM_IBM_X40 default y if ADK_TARGET_SYSTEM_LEMOTE_YEELONG diff --git a/target/linux/patches/2.6.39/cris-etrax.patch b/target/linux/patches/2.6.39/cris-etrax.patch new file mode 100644 index 000000000..a80d9a8b8 --- /dev/null +++ b/target/linux/patches/2.6.39/cris-etrax.patch @@ -0,0 +1,12 @@ +diff -Nur linux-2.6.39.orig/arch/cris/arch-v32/drivers/i2c.h linux-2.6.39/arch/cris/arch-v32/drivers/i2c.h +--- linux-2.6.39.orig/arch/cris/arch-v32/drivers/i2c.h 2011-05-19 06:06:34.000000000 +0200 ++++ linux-2.6.39/arch/cris/arch-v32/drivers/i2c.h 2011-08-24 19:15:05.000000000 +0200 +@@ -2,7 +2,7 @@ + #include <linux/init.h> + + /* High level I2C actions */ +-int __init i2c_init(void); ++static int __init i2c_init(void); + int i2c_write(unsigned char theSlave, void *data, size_t nbytes); + int i2c_read(unsigned char theSlave, void *data, size_t nbytes); + int i2c_writereg(unsigned char theSlave, unsigned char theReg, unsigned char theValue); diff --git a/target/linux/patches/2.6.39/mips-malta.patch b/target/linux/patches/2.6.39/mips-malta.patch new file mode 100644 index 000000000..cc8789dca --- /dev/null +++ b/target/linux/patches/2.6.39/mips-malta.patch @@ -0,0 +1,135 @@ +http://lkml.indiana.edu/hypermail/linux/kernel/1105.3/02199.html + +diff -Nur linux-2.6.39.orig/arch/mips/include/asm/smp-ops.h linux-2.6.39/arch/mips/include/asm/smp-ops.h +--- linux-2.6.39.orig/arch/mips/include/asm/smp-ops.h 2011-05-19 06:06:34.000000000 +0200 ++++ linux-2.6.39/arch/mips/include/asm/smp-ops.h 2011-08-29 04:39:03.360480881 +0200 +@@ -56,8 +56,43 @@ + + #endif /* !CONFIG_SMP */ + +-extern struct plat_smp_ops up_smp_ops; +-extern struct plat_smp_ops cmp_smp_ops; +-extern struct plat_smp_ops vsmp_smp_ops; ++static inline int register_up_smp_ops(void) ++{ ++#ifdef CONFIG_SMP_UP ++ extern struct plat_smp_ops up_smp_ops; ++ ++ register_smp_ops(&up_smp_ops); ++ ++ return 0; ++#else ++ return -ENODEV; ++#endif ++} ++ ++static inline int register_cmp_smp_ops(void) ++{ ++#ifdef CONFIG_MIPS_CMP ++ extern struct plat_smp_ops cmp_smp_ops; ++ ++ register_smp_ops(&cmp_smp_ops); ++ ++ return 0; ++#else ++ return -ENODEV; ++#endif ++} ++ ++static inline int register_vsmp_smp_ops(void) ++{ ++#ifdef CONFIG_MIPS_MT_SMP ++ extern struct plat_smp_ops vsmp_smp_ops; ++ ++ register_smp_ops(&vsmp_smp_ops); ++ ++ return 0; ++#else ++ return -ENODEV; ++#endif ++} + + #endif /* __ASM_SMP_OPS_H */ +diff -Nur linux-2.6.39.orig/arch/mips/mipssim/sim_setup.c linux-2.6.39/arch/mips/mipssim/sim_setup.c +--- linux-2.6.39.orig/arch/mips/mipssim/sim_setup.c 2011-05-19 06:06:34.000000000 +0200 ++++ linux-2.6.39/arch/mips/mipssim/sim_setup.c 2011-08-29 04:39:03.390480572 +0200 +@@ -59,18 +59,17 @@ + + prom_meminit(); + +-#ifdef CONFIG_MIPS_MT_SMP +- if (cpu_has_mipsmt) +- register_smp_ops(&vsmp_smp_ops); +- else +- register_smp_ops(&up_smp_ops); +-#endif ++ if (cpu_has_mipsmt) { ++ if (!register_vsmp_smp_ops()) ++ return; ++ + #ifdef CONFIG_MIPS_MT_SMTC +- if (cpu_has_mipsmt) + register_smp_ops(&ssmtc_smp_ops); +- else +- register_smp_ops(&up_smp_ops); ++ return; + #endif ++ } ++ ++ register_up_smp_ops(); + } + + static void __init serial_init(void) +diff -Nur linux-2.6.39.orig/arch/mips/mti-malta/malta-init.c linux-2.6.39/arch/mips/mti-malta/malta-init.c +--- linux-2.6.39.orig/arch/mips/mti-malta/malta-init.c 2011-05-19 06:06:34.000000000 +0200 ++++ linux-2.6.39/arch/mips/mti-malta/malta-init.c 2011-08-29 04:39:03.700480601 +0200 +@@ -29,6 +29,7 @@ + #include <asm/system.h> + #include <asm/cacheflush.h> + #include <asm/traps.h> ++#include <asm/smp-ops.h> + + #include <asm/gcmpregs.h> + #include <asm/mips-boards/prom.h> +@@ -358,15 +359,14 @@ + #ifdef CONFIG_SERIAL_8250_CONSOLE + console_config(); + #endif +-#ifdef CONFIG_MIPS_CMP + /* Early detection of CMP support */ + if (gcmp_probe(GCMP_BASE_ADDR, GCMP_ADDRSPACE_SZ)) +- register_smp_ops(&cmp_smp_ops); +- else +-#endif +-#ifdef CONFIG_MIPS_MT_SMP +- register_smp_ops(&vsmp_smp_ops); +-#endif ++ if (!register_cmp_smp_ops()) ++ return; ++ ++ if (!register_vsmp_smp_ops()) ++ return; ++ + #ifdef CONFIG_MIPS_MT_SMTC + register_smp_ops(&msmtc_smp_ops); + #endif +diff -Nur linux-2.6.39.orig/arch/mips/pmc-sierra/msp71xx/msp_setup.c linux-2.6.39/arch/mips/pmc-sierra/msp71xx/msp_setup.c +--- linux-2.6.39.orig/arch/mips/pmc-sierra/msp71xx/msp_setup.c 2011-05-19 06:06:34.000000000 +0200 ++++ linux-2.6.39/arch/mips/pmc-sierra/msp71xx/msp_setup.c 2011-08-29 04:39:03.790480302 +0200 +@@ -228,13 +228,11 @@ + */ + msp_serial_setup(); + +-#ifdef CONFIG_MIPS_MT_SMP +- register_smp_ops(&vsmp_smp_ops); +-#endif +- ++ if (register_vsmp_smp_ops()) { + #ifdef CONFIG_MIPS_MT_SMTC +- register_smp_ops(&msp_smtc_smp_ops); ++ register_smp_ops(&msp_smtc_smp_ops); + #endif ++ } + + #ifdef CONFIG_PMCTWILED + /* diff --git a/target/linux/patches/2.6.39/rb4xx.patch b/target/linux/patches/2.6.39/rb4xx.patch index 49fd204d7..4f2e1cd84 100644 --- a/target/linux/patches/2.6.39/rb4xx.patch +++ b/target/linux/patches/2.6.39/rb4xx.patch @@ -1,6 +1,571 @@ +diff -Nur linux-2.6.39.orig/arch/mips/Kconfig linux-2.6.39/arch/mips/Kconfig +--- linux-2.6.39.orig/arch/mips/Kconfig 2011-05-19 06:06:34.000000000 +0200 ++++ linux-2.6.39/arch/mips/Kconfig 2011-08-24 18:17:24.000000000 +0200 +@@ -84,6 +84,23 @@ + help + Support for the Atheros AR71XX/AR724X/AR913X SoCs. + ++config ATHEROS_AR71XX ++ bool "Atheros AR71xx based boards" ++ select CEVT_R4K ++ select CSRC_R4K ++ select DMA_NONCOHERENT ++ select HW_HAS_PCI ++ select IRQ_CPU ++ select ARCH_REQUIRE_GPIOLIB ++ select SYS_HAS_CPU_MIPS32_R1 ++ select SYS_HAS_CPU_MIPS32_R2 ++ select SYS_SUPPORTS_32BIT_KERNEL ++ select SYS_SUPPORTS_BIG_ENDIAN ++ select SYS_HAS_EARLY_PRINTK ++ select MIPS_MACHINE ++ help ++ Support for Atheros AR71xx based boards. ++ + config BCM47XX + bool "Broadcom BCM47XX based boards" + select CEVT_R4K +@@ -739,6 +756,7 @@ + endchoice + + source "arch/mips/alchemy/Kconfig" ++source "arch/mips/ar71xx/Kconfig" + source "arch/mips/ath79/Kconfig" + source "arch/mips/bcm63xx/Kconfig" + source "arch/mips/jazz/Kconfig" +@@ -907,6 +925,9 @@ + config MIPS_DISABLE_OBSOLETE_IDE + bool + ++config MYLOADER ++ bool ++ + config SYNC_R4K + bool + +diff -Nur linux-2.6.39.orig/arch/mips/Makefile linux-2.6.39/arch/mips/Makefile +--- linux-2.6.39.orig/arch/mips/Makefile 2011-05-19 06:06:34.000000000 +0200 ++++ linux-2.6.39/arch/mips/Makefile 2011-08-24 18:17:24.000000000 +0200 +@@ -158,6 +158,13 @@ + endif + cflags-$(CONFIG_CAVIUM_CN63XXP1) += -Wa,-mfix-cn63xxp1 + ++# ++# Atheros AR71xx ++# ++core-$(CONFIG_ATHEROS_AR71XX) += arch/mips/ar71xx/ ++cflags-$(CONFIG_ATHEROS_AR71XX) += -I$(srctree)/arch/mips/include/asm/mach-ar71xx ++load-$(CONFIG_ATHEROS_AR71XX) += 0xffffffff80060000 ++ + cflags-$(CONFIG_CPU_R4000_WORKAROUNDS) += $(call cc-option,-mfix-r4000,) + cflags-$(CONFIG_CPU_R4400_WORKAROUNDS) += $(call cc-option,-mfix-r4400,) + cflags-$(CONFIG_CPU_DADDI_WORKAROUNDS) += $(call cc-option,-mno-daddi,) +@@ -174,6 +181,7 @@ + # + libs-$(CONFIG_ARC) += arch/mips/fw/arc/ + libs-$(CONFIG_CFE) += arch/mips/fw/cfe/ ++libs-$(CONFIG_MYLOADER) += arch/mips/fw/myloader/ + libs-$(CONFIG_SNIPROM) += arch/mips/fw/sni/ + libs-y += arch/mips/fw/lib/ + +diff -Nur linux-2.6.39.orig/arch/mips/ar71xx/Kconfig linux-2.6.39/arch/mips/ar71xx/Kconfig +--- linux-2.6.39.orig/arch/mips/ar71xx/Kconfig 1970-01-01 01:00:00.000000000 +0100 ++++ linux-2.6.39/arch/mips/ar71xx/Kconfig 2011-08-24 18:17:23.000000000 +0200 +@@ -0,0 +1,420 @@ ++if ATHEROS_AR71XX ++ ++menu "Atheros AR71xx machine selection" ++ ++config AR71XX_MACH_AP81 ++ bool "Atheros AP81 board support" ++ select SOC_AR913X ++ select AR71XX_DEV_M25P80 ++ select AR71XX_DEV_AR9XXX_WMAC ++ select AR71XX_DEV_GPIO_BUTTONS ++ select AR71XX_DEV_LEDS_GPIO ++ select AR71XX_DEV_USB ++ default n ++ ++config AR71XX_MACH_AP83 ++ bool "Atheros AP83 board support" ++ select SOC_AR913X ++ select AR71XX_DEV_AR9XXX_WMAC ++ select AR71XX_DEV_GPIO_BUTTONS ++ select AR71XX_DEV_LEDS_GPIO ++ select AR71XX_DEV_USB ++ default n ++ ++config AR71XX_MACH_AP96 ++ bool "Atheros AP96 board support" ++ select SOC_AR71XX ++ select AR71XX_DEV_M25P80 ++ select AR71XX_DEV_AP94_PCI if PCI ++ select AR71XX_DEV_GPIO_BUTTONS ++ select AR71XX_DEV_LEDS_GPIO ++ select AR71XX_DEV_USB ++ default n ++ ++config AR71XX_MACH_AP121 ++ bool "Atheros AP121 board support" ++ select AR71XX_DEV_M25P80 ++ select AR71XX_DEV_GPIO_BUTTONS ++ select AR71XX_DEV_LEDS_GPIO ++ select AR71XX_DEV_USB ++ select AR71XX_DEV_AR9XXX_WMAC ++ select SOC_AR933X ++ default n ++ ++config AR71XX_MACH_DB120 ++ bool "Atheros DB120 board support" ++ select SOC_AR934X ++ select AR71XX_DEV_AR9XXX_WMAC ++ select AR71XX_DEV_DB120_PCI if PCI ++ select AR71XX_DEV_GPIO_BUTTONS ++ select AR71XX_DEV_LEDS_GPIO ++ select AR71XX_DEV_USB ++ default n ++ ++config AR71XX_MACH_DIR_600_A1 ++ bool "D-Link DIR-600 rev. A1 support" ++ select SOC_AR724X ++ select AR71XX_DEV_AP91_PCI if PCI ++ select AR71XX_DEV_M25P80 ++ select AR71XX_DEV_GPIO_BUTTONS ++ select AR71XX_DEV_LEDS_GPIO ++ select AR71XX_NVRAM ++ default n ++ ++config AR71XX_MACH_DIR_615_C1 ++ bool "D-Link DIR-615 rev. C1 support" ++ select SOC_AR913X ++ select AR71XX_DEV_M25P80 ++ select AR71XX_DEV_AR9XXX_WMAC ++ select AR71XX_DEV_GPIO_BUTTONS ++ select AR71XX_DEV_LEDS_GPIO ++ select AR71XX_NVRAM ++ default n ++ ++config AR71XX_MACH_DIR_825_B1 ++ bool "D-Link DIR-825 rev. B1 board support" ++ select SOC_AR71XX ++ select AR71XX_DEV_M25P80 ++ select AR71XX_DEV_AP94_PCI if PCI ++ select AR71XX_DEV_GPIO_BUTTONS ++ select AR71XX_DEV_LEDS_GPIO ++ select AR71XX_DEV_USB ++ default n ++ ++config AR71XX_MACH_JA76PF ++ bool "jjPlus JA76PF board support" ++ select SOC_AR71XX ++ select AR71XX_DEV_M25P80 ++ select AR71XX_DEV_GPIO_BUTTONS ++ select AR71XX_DEV_PB42_PCI if PCI ++ select AR71XX_DEV_LEDS_GPIO ++ select AR71XX_DEV_USB ++ default n ++ ++config AR71XX_MACH_JWAP003 ++ bool "jjPlus JWAP003 board support" ++ select SOC_AR71XX ++ select AR71XX_DEV_M25P80 ++ select AR71XX_DEV_GPIO_BUTTONS ++ select AR71XX_DEV_PB42_PCI if PCI ++ select AR71XX_DEV_USB ++ default n ++ ++config AR71XX_MACH_PB42 ++ bool "Atheros PB42 board support" ++ select SOC_AR71XX ++ select AR71XX_DEV_M25P80 ++ select AR71XX_DEV_GPIO_BUTTONS ++ select AR71XX_DEV_PB42_PCI if PCI ++ default n ++ ++config AR71XX_MACH_PB44 ++ bool "Atheros PB44 board support" ++ select SOC_AR71XX ++ select AR71XX_DEV_GPIO_BUTTONS ++ select AR71XX_DEV_PB42_PCI if PCI ++ select AR71XX_DEV_LEDS_GPIO ++ select AR71XX_DEV_USB ++ default n ++ ++config AR71XX_MACH_PB92 ++ bool "Atheros PB92 board support" ++ select SOC_AR724X ++ select AR71XX_DEV_GPIO_BUTTONS ++ select AR71XX_DEV_PB9X_PCI if PCI ++ select AR71XX_DEV_LEDS_GPIO ++ select AR71XX_DEV_USB ++ default n ++ ++config AR71XX_MACH_AW_NR580 ++ bool "AzureWave AW-NR580 board support" ++ select SOC_AR71XX ++ select AR71XX_DEV_M25P80 ++ select AR71XX_DEV_GPIO_BUTTONS ++ select AR71XX_DEV_PB42_PCI if PCI ++ select AR71XX_DEV_LEDS_GPIO ++ default n ++ ++config AR71XX_MACH_WZR_HP_AG300H ++ bool "Buffalo WZR-HP-AG300H board support" ++ select SOC_AR71XX ++ select AR71XX_DEV_M25P80 ++ select AR71XX_DEV_GPIO_BUTTONS ++ select AR71XX_DEV_LEDS_GPIO ++ select AR71XX_DEV_USB ++ default n ++ ++config AR71XX_MACH_WZR_HP_G300NH ++ bool "Buffalo WZR-HP-G300NH board support" ++ select SOC_AR913X ++ select AR71XX_DEV_AR9XXX_WMAC ++ select AR71XX_DEV_GPIO_BUTTONS ++ select AR71XX_DEV_LEDS_GPIO ++ select AR71XX_DEV_USB ++ select RTL8366_SMI ++ default n ++ ++config AR71XX_MACH_WP543 ++ bool "Compex WP543/WPJ543 board support" ++ select SOC_AR71XX ++ select MYLOADER ++ select AR71XX_DEV_M25P80 ++ select AR71XX_DEV_GPIO_BUTTONS ++ select AR71XX_DEV_PB42_PCI if PCI ++ select AR71XX_DEV_LEDS_GPIO ++ select AR71XX_DEV_USB ++ default n ++ ++config AR71XX_MACH_WRT160NL ++ bool "Linksys WRT160NL board support" ++ select SOC_AR913X ++ select AR71XX_DEV_M25P80 ++ select AR71XX_DEV_AR9XXX_WMAC ++ select AR71XX_DEV_GPIO_BUTTONS ++ select AR71XX_DEV_LEDS_GPIO ++ select AR71XX_DEV_USB ++ select AR71XX_NVRAM ++ default n ++ ++config AR71XX_MACH_WRT400N ++ bool "Linksys WRT400N board support" ++ select SOC_AR71XX ++ select AR71XX_DEV_AP94_PCI if PCI ++ select AR71XX_DEV_M25P80 ++ select AR71XX_DEV_GPIO_BUTTONS ++ select AR71XX_DEV_LEDS_GPIO ++ default n ++ ++config AR71XX_MACH_RB4XX ++ bool "MikroTik RouterBOARD 4xx series support" ++ select SOC_AR71XX ++ select AR71XX_DEV_GPIO_BUTTONS ++ select AR71XX_DEV_LEDS_GPIO ++ select AR71XX_DEV_USB ++ default n ++ ++config AR71XX_MACH_RB750 ++ bool "MikroTik RouterBOARD 750 support" ++ select SOC_AR724X ++ default n ++ ++config AR71XX_MACH_WNDR3700 ++ bool "NETGEAR WNDR3700 board support" ++ select SOC_AR71XX ++ select AR71XX_DEV_M25P80 ++ select AR71XX_DEV_AP94_PCI if PCI ++ select AR71XX_DEV_GPIO_BUTTONS ++ select AR71XX_DEV_LEDS_GPIO ++ select AR71XX_DEV_USB ++ default n ++ ++config AR71XX_MACH_WNR2000 ++ bool "NETGEAR WNR2000 board support" ++ select SOC_AR913X ++ select AR71XX_DEV_M25P80 ++ select AR71XX_DEV_AR9XXX_WMAC ++ select AR71XX_DEV_GPIO_BUTTONS ++ select AR71XX_DEV_LEDS_GPIO ++ default n ++ ++config AR71XX_MACH_MZK_W04NU ++ bool "Planex MZK-W04NU board support" ++ select SOC_AR913X ++ select AR71XX_DEV_M25P80 ++ select AR71XX_DEV_AR9XXX_WMAC ++ select AR71XX_DEV_GPIO_BUTTONS ++ select AR71XX_DEV_LEDS_GPIO ++ select AR71XX_DEV_USB ++ default n ++ ++config AR71XX_MACH_MZK_W300NH ++ bool "Planex MZK-W300NH board support" ++ select SOC_AR913X ++ select AR71XX_DEV_M25P80 ++ select AR71XX_DEV_AR9XXX_WMAC ++ select AR71XX_DEV_GPIO_BUTTONS ++ select AR71XX_DEV_LEDS_GPIO ++ default n ++ ++config AR71XX_MACH_NBG460N ++ bool "Zyxel NBG460N/550N/550NH board support" ++ select SOC_AR913X ++ select AR71XX_DEV_M25P80 ++ select AR71XX_DEV_AR9XXX_WMAC ++ select AR71XX_DEV_GPIO_BUTTONS ++ select AR71XX_DEV_LEDS_GPIO ++ default n ++ ++config AR71XX_MACH_TL_MR3X20 ++ bool "TP-LINK TL-MR3220/3420 support" ++ select SOC_AR724X ++ select AR71XX_DEV_M25P80 ++ select AR71XX_DEV_AP91_PCI if PCI ++ select AR71XX_DEV_GPIO_BUTTONS ++ select AR71XX_DEV_LEDS_GPIO ++ select AR71XX_DEV_USB ++ default n ++ ++config AR71XX_MACH_TL_WA901ND ++ bool "TP-LINK TL-WA901ND support" ++ select SOC_AR724X ++ select AR71XX_DEV_M25P80 ++ select AR71XX_DEV_AP91_PCI if PCI ++ select AR71XX_DEV_GPIO_BUTTONS ++ select AR71XX_DEV_LEDS_GPIO ++ default n ++ ++config AR71XX_MACH_TL_WA901ND_V2 ++ bool "TP-LINK TL-WA901ND v2 support" ++ select SOC_AR913X ++ select AR71XX_DEV_M25P80 ++ select AR71XX_DEV_AR9XXX_WMAC ++ select AR71XX_DEV_GPIO_BUTTONS ++ select AR71XX_DEV_LEDS_GPIO ++ default n ++ ++config AR71XX_MACH_TL_WR741ND ++ bool "TP-LINK TL-WR741ND support" ++ select SOC_AR724X ++ select AR71XX_DEV_M25P80 ++ select AR71XX_DEV_AP91_PCI if PCI ++ select AR71XX_DEV_GPIO_BUTTONS ++ select AR71XX_DEV_LEDS_GPIO ++ default n ++ ++config AR71XX_MACH_TL_WR841N_V1 ++ bool "TP-LINK TL-WR841N v1 support" ++ select SOC_AR71XX ++ select AR71XX_DEV_M25P80 ++ select AR71XX_DEV_PB42_PCI if PCI ++ select AR71XX_DEV_DSA ++ select AR71XX_DEV_GPIO_BUTTONS ++ select AR71XX_DEV_LEDS_GPIO ++ default n ++ ++config AR71XX_MACH_TL_WR941ND ++ bool "TP-LINK TL-WR941ND support" ++ select SOC_AR913X ++ select AR71XX_DEV_M25P80 ++ select AR71XX_DEV_AR9XXX_WMAC ++ select AR71XX_DEV_DSA ++ select AR71XX_DEV_GPIO_BUTTONS ++ select AR71XX_DEV_LEDS_GPIO ++ default n ++ ++config AR71XX_MACH_TL_WR1043ND ++ bool "TP-LINK TL-WR1043ND support" ++ select SOC_AR913X ++ select AR71XX_DEV_M25P80 ++ select AR71XX_DEV_AR9XXX_WMAC ++ select AR71XX_DEV_GPIO_BUTTONS ++ select AR71XX_DEV_LEDS_GPIO ++ select AR71XX_DEV_USB ++ default n ++ ++config AR71XX_MACH_TEW_632BRP ++ bool "TRENDnet TEW-632BRP support" ++ select SOC_AR913X ++ select AR71XX_DEV_M25P80 ++ select AR71XX_DEV_AR9XXX_WMAC ++ select AR71XX_DEV_GPIO_BUTTONS ++ select AR71XX_DEV_LEDS_GPIO ++ select AR71XX_NVRAM ++ default n ++ ++config AR71XX_MACH_UBNT ++ bool "Ubiquiti AR71xx based boards support" ++ select SOC_AR71XX ++ select SOC_AR724X ++ select AR71XX_DEV_M25P80 ++ select AR71XX_DEV_AP91_PCI if PCI ++ select AR71XX_DEV_GPIO_BUTTONS ++ select AR71XX_DEV_LEDS_GPIO ++ select AR71XX_DEV_PB42_PCI if PCI ++ select AR71XX_DEV_USB ++ default n ++ ++config AR71XX_MACH_EAP7660D ++ bool "Senao EAP7660D support" ++ select SOC_AR71XX ++ select AR71XX_DEV_M25P80 ++ select AR71XX_DEV_GPIO_BUTTONS ++ select AR71XX_DEV_LEDS_GPIO ++ default n ++ ++config AR71XX_MACH_ZCN_1523H ++ bool "Zcomax ZCN-1523H support" ++ select SOC_AR724X ++ select AR71XX_DEV_M25P80 ++ select AR71XX_DEV_AP91_PCI if PCI ++ select AR71XX_DEV_GPIO_BUTTONS ++ select AR71XX_DEV_LEDS_GPIO ++ default n ++ ++endmenu ++ ++config SOC_AR71XX ++ bool ++ select USB_ARCH_HAS_EHCI ++ select USB_ARCH_HAS_OHCI ++ ++config SOC_AR724X ++ bool ++ select USB_ARCH_HAS_EHCI ++ select USB_ARCH_HAS_OHCI ++ ++config SOC_AR913X ++ bool ++ select USB_ARCH_HAS_EHCI ++ ++config SOC_AR934X ++ bool ++ select USB_ARCH_HAS_EHCI ++ ++config AR71XX_DEV_M25P80 ++ def_bool n ++ ++config AR71XX_DEV_AP91_PCI ++ select AR71XX_PCI_ATH9K_FIXUP ++ def_bool n ++ ++config AR71XX_DEV_AP94_PCI ++ select AR71XX_PCI_ATH9K_FIXUP ++ def_bool n ++ ++config AR71XX_DEV_AR9XXX_WMAC ++ def_bool n ++ ++config AR71XX_DEV_DB120_PCI ++ select AR71XX_PCI_ATH9K_FIXUP ++ def_bool n ++ ++config AR71XX_DEV_DSA ++ def_bool n ++ ++config AR71XX_DEV_GPIO_BUTTONS ++ def_bool n ++ ++config AR71XX_DEV_LEDS_GPIO ++ def_bool n ++ ++config AR71XX_DEV_PB42_PCI ++ def_bool n ++ ++config AR71XX_DEV_PB9X_PCI ++ def_bool n ++ ++config AR71XX_DEV_USB ++ def_bool n ++ ++config AR71XX_NVRAM ++ def_bool n ++ ++config AR71XX_PCI_ATH9K_FIXUP ++ def_bool n ++ ++config SOC_AR933X ++ bool ++ select USB_ARCH_HAS_EHCI ++ ++endif +diff -Nur linux-2.6.39.orig/arch/mips/ar71xx/Makefile linux-2.6.39/arch/mips/ar71xx/Makefile +--- linux-2.6.39.orig/arch/mips/ar71xx/Makefile 1970-01-01 01:00:00.000000000 +0100 ++++ linux-2.6.39/arch/mips/ar71xx/Makefile 2011-08-24 18:17:23.000000000 +0200 +@@ -0,0 +1,67 @@ ++# ++# Makefile for the Atheros AR71xx SoC specific parts of the kernel ++# ++# Copyright (C) 2008-2009 Gabor Juhos <juhosg@openwrt.org> ++# Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org> ++# ++# This program is free software; you can redistribute it and/or modify it ++# under the terms of the GNU General Public License version 2 as published ++# by the Free Software Foundation. ++ ++obj-y := prom.o irq.o setup.o devices.o gpio.o ar71xx.o ++ ++obj-$(CONFIG_EARLY_PRINTK) += early_printk.o ++obj-$(CONFIG_PCI) += pci.o ++ ++obj-$(CONFIG_AR71XX_DEV_AP91_PCI) += dev-ap91-pci.o ++obj-$(CONFIG_AR71XX_DEV_AP94_PCI) += dev-ap94-pci.o ++obj-$(CONFIG_AR71XX_DEV_AR9XXX_WMAC) += dev-ar9xxx-wmac.o ++obj-$(CONFIG_AR71XX_DEV_DB120_PCI) += dev-db120-pci.o ++obj-$(CONFIG_AR71XX_DEV_DSA) += dev-dsa.o ++obj-$(CONFIG_AR71XX_DEV_GPIO_BUTTONS) += dev-gpio-buttons.o ++obj-$(CONFIG_AR71XX_DEV_LEDS_GPIO) += dev-leds-gpio.o ++obj-$(CONFIG_AR71XX_DEV_M25P80) += dev-m25p80.o ++obj-$(CONFIG_AR71XX_DEV_PB42_PCI) += dev-pb42-pci.o ++obj-$(CONFIG_AR71XX_DEV_PB9X_PCI) += dev-pb9x-pci.o ++obj-$(CONFIG_AR71XX_DEV_USB) += dev-usb.o ++ ++obj-$(CONFIG_AR71XX_NVRAM) += nvram.o ++obj-$(CONFIG_AR71XX_PCI_ATH9K_FIXUP) += pci-ath9k-fixup.o ++ ++obj-$(CONFIG_AR71XX_MACH_AP121) += mach-ap121.o ++obj-$(CONFIG_AR71XX_MACH_AP81) += mach-ap81.o ++obj-$(CONFIG_AR71XX_MACH_AP83) += mach-ap83.o ++obj-$(CONFIG_AR71XX_MACH_AP96) += mach-ap96.o ++obj-$(CONFIG_AR71XX_MACH_AW_NR580) += mach-aw-nr580.o ++obj-$(CONFIG_AR71XX_MACH_DB120) += mach-db120.o ++obj-$(CONFIG_AR71XX_MACH_DIR_600_A1) += mach-dir-600-a1.o ++obj-$(CONFIG_AR71XX_MACH_DIR_615_C1) += mach-dir-615-c1.o ++obj-$(CONFIG_AR71XX_MACH_DIR_825_B1) += mach-dir-825-b1.o ++obj-$(CONFIG_AR71XX_MACH_EAP7660D) += mach-eap7660d.o ++obj-$(CONFIG_AR71XX_MACH_JA76PF) += mach-ja76pf.o ++obj-$(CONFIG_AR71XX_MACH_JWAP003) += mach-jwap003.o ++obj-$(CONFIG_AR71XX_MACH_MZK_W04NU) += mach-mzk-w04nu.o ++obj-$(CONFIG_AR71XX_MACH_MZK_W300NH) += mach-mzk-w300nh.o ++obj-$(CONFIG_AR71XX_MACH_NBG460N) += mach-nbg460n.o ++obj-$(CONFIG_AR71XX_MACH_PB42) += mach-pb42.o ++obj-$(CONFIG_AR71XX_MACH_PB44) += mach-pb44.o ++obj-$(CONFIG_AR71XX_MACH_PB92) += mach-pb92.o ++obj-$(CONFIG_AR71XX_MACH_RB4XX) += mach-rb4xx.o ++obj-$(CONFIG_AR71XX_MACH_RB750) += mach-rb750.o ++obj-$(CONFIG_AR71XX_MACH_TEW_632BRP) += mach-tew-632brp.o ++obj-$(CONFIG_AR71XX_MACH_TL_MR3X20) += mach-tl-mr3x20.o ++obj-$(CONFIG_AR71XX_MACH_TL_WA901ND) += mach-tl-wa901nd.o ++obj-$(CONFIG_AR71XX_MACH_TL_WA901ND_V2) += mach-tl-wa901nd-v2.o ++obj-$(CONFIG_AR71XX_MACH_TL_WR741ND) += mach-tl-wr741nd.o ++obj-$(CONFIG_AR71XX_MACH_TL_WR841N_V1) += mach-tl-wr841n.o ++obj-$(CONFIG_AR71XX_MACH_TL_WR941ND) += mach-tl-wr941nd.o ++obj-$(CONFIG_AR71XX_MACH_TL_WR1043ND) += mach-tl-wr1043nd.o ++obj-$(CONFIG_AR71XX_MACH_UBNT) += mach-ubnt.o ++obj-$(CONFIG_AR71XX_MACH_WNDR3700) += mach-wndr3700.o ++obj-$(CONFIG_AR71XX_MACH_WNR2000) += mach-wnr2000.o ++obj-$(CONFIG_AR71XX_MACH_WP543) += mach-wp543.o ++obj-$(CONFIG_AR71XX_MACH_WRT160NL) += mach-wrt160nl.o ++obj-$(CONFIG_AR71XX_MACH_WRT400N) += mach-wrt400n.o ++obj-$(CONFIG_AR71XX_MACH_WZR_HP_G300NH) += mach-wzr-hp-g300nh.o ++obj-$(CONFIG_AR71XX_MACH_WZR_HP_AG300H) += mach-wzr-hp-ag300h.o ++obj-$(CONFIG_AR71XX_MACH_ZCN_1523H) += mach-zcn-1523h.o diff -Nur linux-2.6.39.orig/arch/mips/ar71xx/ar71xx.c linux-2.6.39/arch/mips/ar71xx/ar71xx.c --- linux-2.6.39.orig/arch/mips/ar71xx/ar71xx.c 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.39/arch/mips/ar71xx/ar71xx.c 2011-08-24 02:41:55.227990426 +0200 ++++ linux-2.6.39/arch/mips/ar71xx/ar71xx.c 2011-08-24 18:17:23.000000000 +0200 @@ -0,0 +1,230 @@ +/* + * AR71xx SoC routines @@ -234,7 +799,7 @@ diff -Nur linux-2.6.39.orig/arch/mips/ar71xx/ar71xx.c linux-2.6.39/arch/mips/ar7 +EXPORT_SYMBOL_GPL(ar71xx_flash_release); diff -Nur linux-2.6.39.orig/arch/mips/ar71xx/dev-ap91-pci.c linux-2.6.39/arch/mips/ar71xx/dev-ap91-pci.c --- linux-2.6.39.orig/arch/mips/ar71xx/dev-ap91-pci.c 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.39/arch/mips/ar71xx/dev-ap91-pci.c 2011-08-24 02:41:55.277990824 +0200 ++++ linux-2.6.39/arch/mips/ar71xx/dev-ap91-pci.c 2011-08-24 18:17:23.000000000 +0200 @@ -0,0 +1,71 @@ +/* + * Atheros AP91 reference board PCI initialization @@ -309,7 +874,7 @@ diff -Nur linux-2.6.39.orig/arch/mips/ar71xx/dev-ap91-pci.c linux-2.6.39/arch/mi +} diff -Nur linux-2.6.39.orig/arch/mips/ar71xx/dev-ap91-pci.h linux-2.6.39/arch/mips/ar71xx/dev-ap91-pci.h --- linux-2.6.39.orig/arch/mips/ar71xx/dev-ap91-pci.h 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.39/arch/mips/ar71xx/dev-ap91-pci.h 2011-08-24 02:41:55.287981779 +0200 ++++ linux-2.6.39/arch/mips/ar71xx/dev-ap91-pci.h 2011-08-24 18:17:23.000000000 +0200 @@ -0,0 +1,25 @@ +/* + * Atheros AP91 reference board PCI initialization @@ -338,7 +903,7 @@ diff -Nur linux-2.6.39.orig/arch/mips/ar71xx/dev-ap91-pci.h linux-2.6.39/arch/mi + diff -Nur linux-2.6.39.orig/arch/mips/ar71xx/dev-ap94-pci.c linux-2.6.39/arch/mips/ar71xx/dev-ap94-pci.c --- linux-2.6.39.orig/arch/mips/ar71xx/dev-ap94-pci.c 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.39/arch/mips/ar71xx/dev-ap94-pci.c 2011-08-24 02:41:55.287981779 +0200 ++++ linux-2.6.39/arch/mips/ar71xx/dev-ap94-pci.c 2011-08-24 18:17:23.000000000 +0200 @@ -0,0 +1,109 @@ +/* + * Atheros AP94 reference board PCI initialization @@ -451,7 +1016,7 @@ diff -Nur linux-2.6.39.orig/arch/mips/ar71xx/dev-ap94-pci.c linux-2.6.39/arch/mi +} diff -Nur linux-2.6.39.orig/arch/mips/ar71xx/dev-ap94-pci.h linux-2.6.39/arch/mips/ar71xx/dev-ap94-pci.h --- linux-2.6.39.orig/arch/mips/ar71xx/dev-ap94-pci.h 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.39/arch/mips/ar71xx/dev-ap94-pci.h 2011-08-24 02:41:55.287981779 +0200 ++++ linux-2.6.39/arch/mips/ar71xx/dev-ap94-pci.h 2011-08-24 18:17:23.000000000 +0200 @@ -0,0 +1,31 @@ +/* + * Atheros AP94 reference board PCI initialization @@ -486,7 +1051,7 @@ diff -Nur linux-2.6.39.orig/arch/mips/ar71xx/dev-ap94-pci.h linux-2.6.39/arch/mi + diff -Nur linux-2.6.39.orig/arch/mips/ar71xx/dev-ar9xxx-wmac.c linux-2.6.39/arch/mips/ar71xx/dev-ar9xxx-wmac.c --- linux-2.6.39.orig/arch/mips/ar71xx/dev-ar9xxx-wmac.c 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.39/arch/mips/ar71xx/dev-ar9xxx-wmac.c 2011-08-24 02:41:55.287981779 +0200 ++++ linux-2.6.39/arch/mips/ar71xx/dev-ar9xxx-wmac.c 2011-08-24 18:17:23.000000000 +0200 @@ -0,0 +1,154 @@ +/* + * Atheros AR9XXX SoCs built-in WMAC device support @@ -644,7 +1209,7 @@ diff -Nur linux-2.6.39.orig/arch/mips/ar71xx/dev-ar9xxx-wmac.c linux-2.6.39/arch +} diff -Nur linux-2.6.39.orig/arch/mips/ar71xx/dev-ar9xxx-wmac.h linux-2.6.39/arch/mips/ar71xx/dev-ar9xxx-wmac.h --- linux-2.6.39.orig/arch/mips/ar71xx/dev-ar9xxx-wmac.h 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.39/arch/mips/ar71xx/dev-ar9xxx-wmac.h 2011-08-24 02:41:55.297981663 +0200 ++++ linux-2.6.39/arch/mips/ar71xx/dev-ar9xxx-wmac.h 2011-08-24 18:17:23.000000000 +0200 @@ -0,0 +1,20 @@ +/* + * Atheros AR9XXX SoCs built-in WMAC device support @@ -668,7 +1233,7 @@ diff -Nur linux-2.6.39.orig/arch/mips/ar71xx/dev-ar9xxx-wmac.h linux-2.6.39/arch +#endif /* _AR71XX_DEV_AR9XXX_WMAC_H */ diff -Nur linux-2.6.39.orig/arch/mips/ar71xx/dev-db120-pci.c linux-2.6.39/arch/mips/ar71xx/dev-db120-pci.c --- linux-2.6.39.orig/arch/mips/ar71xx/dev-db120-pci.c 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.39/arch/mips/ar71xx/dev-db120-pci.c 2011-08-24 02:41:55.317990461 +0200 ++++ linux-2.6.39/arch/mips/ar71xx/dev-db120-pci.c 2011-08-24 18:17:23.000000000 +0200 @@ -0,0 +1,31 @@ +/* + * Atheros db120 reference board PCI initialization @@ -703,7 +1268,7 @@ diff -Nur linux-2.6.39.orig/arch/mips/ar71xx/dev-db120-pci.c linux-2.6.39/arch/m +} diff -Nur linux-2.6.39.orig/arch/mips/ar71xx/dev-db120-pci.h linux-2.6.39/arch/mips/ar71xx/dev-db120-pci.h --- linux-2.6.39.orig/arch/mips/ar71xx/dev-db120-pci.h 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.39/arch/mips/ar71xx/dev-db120-pci.h 2011-08-24 02:41:55.327990934 +0200 ++++ linux-2.6.39/arch/mips/ar71xx/dev-db120-pci.h 2011-08-24 18:17:23.000000000 +0200 @@ -0,0 +1,22 @@ +/* + * Atheros DB120 reference board PCI initialization @@ -729,7 +1294,7 @@ diff -Nur linux-2.6.39.orig/arch/mips/ar71xx/dev-db120-pci.h linux-2.6.39/arch/m +#endif /* _AR71XX_DEV_DB120_PCI_H */ diff -Nur linux-2.6.39.orig/arch/mips/ar71xx/dev-dsa.c linux-2.6.39/arch/mips/ar71xx/dev-dsa.c --- linux-2.6.39.orig/arch/mips/ar71xx/dev-dsa.c 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.39/arch/mips/ar71xx/dev-dsa.c 2011-08-24 02:41:55.337990441 +0200 ++++ linux-2.6.39/arch/mips/ar71xx/dev-dsa.c 2011-08-24 18:17:23.000000000 +0200 @@ -0,0 +1,50 @@ +/* + * Atheros AR71xx DSA switch device support @@ -783,7 +1348,7 @@ diff -Nur linux-2.6.39.orig/arch/mips/ar71xx/dev-dsa.c linux-2.6.39/arch/mips/ar +} diff -Nur linux-2.6.39.orig/arch/mips/ar71xx/dev-dsa.h linux-2.6.39/arch/mips/ar71xx/dev-dsa.h --- linux-2.6.39.orig/arch/mips/ar71xx/dev-dsa.h 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.39/arch/mips/ar71xx/dev-dsa.h 2011-08-24 02:41:55.347990727 +0200 ++++ linux-2.6.39/arch/mips/ar71xx/dev-dsa.h 2011-08-24 18:17:23.000000000 +0200 @@ -0,0 +1,20 @@ +/* + * Atheros AR71xx DSA switch device support @@ -807,7 +1372,7 @@ diff -Nur linux-2.6.39.orig/arch/mips/ar71xx/dev-dsa.h linux-2.6.39/arch/mips/ar +#endif /* _AR71XX_DEV_DSA_H */ diff -Nur linux-2.6.39.orig/arch/mips/ar71xx/dev-gpio-buttons.c linux-2.6.39/arch/mips/ar71xx/dev-gpio-buttons.c --- linux-2.6.39.orig/arch/mips/ar71xx/dev-gpio-buttons.c 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.39/arch/mips/ar71xx/dev-gpio-buttons.c 2011-08-24 02:41:55.347990727 +0200 ++++ linux-2.6.39/arch/mips/ar71xx/dev-gpio-buttons.c 2011-08-24 18:17:23.000000000 +0200 @@ -0,0 +1,58 @@ +/* + * Atheros AR71xx GPIO button support @@ -869,7 +1434,7 @@ diff -Nur linux-2.6.39.orig/arch/mips/ar71xx/dev-gpio-buttons.c linux-2.6.39/arc +} diff -Nur linux-2.6.39.orig/arch/mips/ar71xx/dev-gpio-buttons.h linux-2.6.39/arch/mips/ar71xx/dev-gpio-buttons.h --- linux-2.6.39.orig/arch/mips/ar71xx/dev-gpio-buttons.h 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.39/arch/mips/ar71xx/dev-gpio-buttons.h 2011-08-24 02:41:55.347990727 +0200 ++++ linux-2.6.39/arch/mips/ar71xx/dev-gpio-buttons.h 2011-08-24 18:17:23.000000000 +0200 @@ -0,0 +1,23 @@ +/* + * Atheros AR71xx GPIO button support @@ -894,9 +1459,505 @@ diff -Nur linux-2.6.39.orig/arch/mips/ar71xx/dev-gpio-buttons.h linux-2.6.39/arc + struct gpio_keys_button *buttons); + +#endif /* _AR71XX_DEV_GPIO_BUTTONS_H */ +diff -Nur linux-2.6.39.orig/arch/mips/ar71xx/dev-leds-gpio.c linux-2.6.39/arch/mips/ar71xx/dev-leds-gpio.c +--- linux-2.6.39.orig/arch/mips/ar71xx/dev-leds-gpio.c 1970-01-01 01:00:00.000000000 +0100 ++++ linux-2.6.39/arch/mips/ar71xx/dev-leds-gpio.c 2011-08-24 18:17:23.000000000 +0200 +@@ -0,0 +1,57 @@ ++/* ++ * Atheros AR71xx GPIO LED device support ++ * ++ * Copyright (C) 2008-2009 Gabor Juhos <juhosg@openwrt.org> ++ * Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org> ++ * ++ * Parts of this file are based on Atheros' 2.6.15 BSP ++ * ++ * This program is free software; you can redistribute it and/or modify it ++ * under the terms of the GNU General Public License version 2 as published ++ * by the Free Software Foundation. ++ */ ++ ++#include <linux/init.h> ++#include <linux/slab.h> ++#include <linux/platform_device.h> ++ ++#include "dev-leds-gpio.h" ++ ++void __init ar71xx_add_device_leds_gpio(int id, unsigned num_leds, ++ struct gpio_led *leds) ++{ ++ struct platform_device *pdev; ++ struct gpio_led_platform_data pdata; ++ struct gpio_led *p; ++ int err; ++ ++ p = kmalloc(num_leds * sizeof(*p), GFP_KERNEL); ++ if (!p) ++ return; ++ ++ memcpy(p, leds, num_leds * sizeof(*p)); ++ ++ pdev = platform_device_alloc("leds-gpio", id); ++ if (!pdev) ++ goto err_free_leds; ++ ++ memset(&pdata, 0, sizeof(pdata)); ++ pdata.num_leds = num_leds; ++ pdata.leds = p; ++ ++ err = platform_device_add_data(pdev, &pdata, sizeof(pdata)); ++ if (err) ++ goto err_put_pdev; ++ ++ err = platform_device_add(pdev); ++ if (err) ++ goto err_put_pdev; ++ ++ return; ++ ++err_put_pdev: ++ platform_device_put(pdev); ++ ++err_free_leds: ++ kfree(p); ++} +diff -Nur linux-2.6.39.orig/arch/mips/ar71xx/dev-leds-gpio.h linux-2.6.39/arch/mips/ar71xx/dev-leds-gpio.h +--- linux-2.6.39.orig/arch/mips/ar71xx/dev-leds-gpio.h 1970-01-01 01:00:00.000000000 +0100 ++++ linux-2.6.39/arch/mips/ar71xx/dev-leds-gpio.h 2011-08-24 18:17:23.000000000 +0200 +@@ -0,0 +1,21 @@ ++/* ++ * Atheros AR71xx GPIO LED device support ++ * ++ * Copyright (C) 2008-2009 Gabor Juhos <juhosg@openwrt.org> ++ * Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org> ++ * ++ * This program is free software; you can redistribute it and/or modify it ++ * under the terms of the GNU General Public License version 2 as published ++ * by the Free Software Foundation. ++ */ ++ ++#ifndef _AR71XX_DEV_LEDS_GPIO_H ++#define _AR71XX_DEV_LEDS_GPIO_H ++ ++#include <linux/leds.h> ++ ++void ar71xx_add_device_leds_gpio(int id, ++ unsigned num_leds, ++ struct gpio_led *leds) __init; ++ ++#endif /* _AR71XX_DEV_LEDS_GPIO_H */ +diff -Nur linux-2.6.39.orig/arch/mips/ar71xx/dev-m25p80.c linux-2.6.39/arch/mips/ar71xx/dev-m25p80.c +--- linux-2.6.39.orig/arch/mips/ar71xx/dev-m25p80.c 1970-01-01 01:00:00.000000000 +0100 ++++ linux-2.6.39/arch/mips/ar71xx/dev-m25p80.c 2011-08-24 18:17:23.000000000 +0200 +@@ -0,0 +1,30 @@ ++/* ++ * Copyright (C) 2009 Gabor Juhos <juhosg@openwrt.org> ++ * ++ * This program is free software; you can redistribute it and/or modify it ++ * under the terms of the GNU General Public License version 2 as published ++ * by the Free Software Foundation. ++ */ ++ ++#include <linux/init.h> ++#include <linux/spi/spi.h> ++#include <linux/spi/flash.h> ++ ++#include "devices.h" ++#include "dev-m25p80.h" ++ ++static struct spi_board_info ar71xx_spi_info[] = { ++ { ++ .bus_num = 0, ++ .chip_select = 0, ++ .max_speed_hz = 25000000, ++ .modalias = "m25p80", ++ } ++}; ++ ++void __init ar71xx_add_device_m25p80(struct flash_platform_data *pdata) ++{ ++ ar71xx_spi_info[0].platform_data = pdata; ++ ar71xx_add_device_spi(NULL, ar71xx_spi_info, ++ ARRAY_SIZE(ar71xx_spi_info)); ++} +diff -Nur linux-2.6.39.orig/arch/mips/ar71xx/dev-m25p80.h linux-2.6.39/arch/mips/ar71xx/dev-m25p80.h +--- linux-2.6.39.orig/arch/mips/ar71xx/dev-m25p80.h 1970-01-01 01:00:00.000000000 +0100 ++++ linux-2.6.39/arch/mips/ar71xx/dev-m25p80.h 2011-08-24 18:17:23.000000000 +0200 +@@ -0,0 +1,16 @@ ++/* ++ * Copyright (C) 2009 Gabor Juhos <juhosg@openwrt.org> ++ * ++ * This program is free software; you can redistribute it and/or modify it ++ * under the terms of the GNU General Public License version 2 as published ++ * by the Free Software Foundation. ++ */ ++ ++#ifndef _AR71XX_DEV_M25P80_H ++#define _AR71XX_DEV_M25P80_H ++ ++#include <linux/spi/flash.h> ++ ++void ar71xx_add_device_m25p80(struct flash_platform_data *pdata) __init; ++ ++#endif /* _AR71XX_DEV_M25P80_H */ +diff -Nur linux-2.6.39.orig/arch/mips/ar71xx/dev-pb42-pci.c linux-2.6.39/arch/mips/ar71xx/dev-pb42-pci.c +--- linux-2.6.39.orig/arch/mips/ar71xx/dev-pb42-pci.c 1970-01-01 01:00:00.000000000 +0100 ++++ linux-2.6.39/arch/mips/ar71xx/dev-pb42-pci.c 2011-08-24 18:17:23.000000000 +0200 +@@ -0,0 +1,40 @@ ++/* ++ * Atheros PB42 reference board PCI initialization ++ * ++ * Copyright (C) 2008-2009 Gabor Juhos <juhosg@openwrt.org> ++ * Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org> ++ * ++ * Parts of this file are based on Atheros' 2.6.15 BSP ++ * ++ * This program is free software; you can redistribute it and/or modify it ++ * under the terms of the GNU General Public License version 2 as published ++ * by the Free Software Foundation. ++ */ ++ ++#include <linux/pci.h> ++ ++#include <asm/mach-ar71xx/ar71xx.h> ++#include <asm/mach-ar71xx/pci.h> ++ ++#include "dev-pb42-pci.h" ++ ++static struct ar71xx_pci_irq pb42_pci_irqs[] __initdata = { ++ { ++ .slot = 0, ++ .pin = 1, ++ .irq = AR71XX_PCI_IRQ_DEV0, ++ }, { ++ .slot = 1, ++ .pin = 1, ++ .irq = AR71XX_PCI_IRQ_DEV1, ++ }, { ++ .slot = 2, ++ .pin = 1, ++ .irq = AR71XX_PCI_IRQ_DEV2, ++ } ++}; ++ ++void __init pb42_pci_init(void) ++{ ++ ar71xx_pci_init(ARRAY_SIZE(pb42_pci_irqs), pb42_pci_irqs); ++} +diff -Nur linux-2.6.39.orig/arch/mips/ar71xx/dev-pb42-pci.h linux-2.6.39/arch/mips/ar71xx/dev-pb42-pci.h +--- linux-2.6.39.orig/arch/mips/ar71xx/dev-pb42-pci.h 1970-01-01 01:00:00.000000000 +0100 ++++ linux-2.6.39/arch/mips/ar71xx/dev-pb42-pci.h 2011-08-24 18:17:23.000000000 +0200 +@@ -0,0 +1,21 @@ ++/* ++ * Atheros PB42 reference board PCI initialization ++ * ++ * Copyright (C) 2008-2009 Gabor Juhos <juhosg@openwrt.org> ++ * Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org> ++ * ++ * This program is free software; you can redistribute it and/or modify it ++ * under the terms of the GNU General Public License version 2 as published ++ * by the Free Software Foundation. ++ */ ++ ++#ifndef _AR71XX_DEV_PB42_PCI_H ++#define _AR71XX_DEV_PB42_PCI_H ++ ++#if defined(CONFIG_AR71XX_DEV_PB42_PCI) ++void pb42_pci_init(void) __init; ++#else ++static inline void pb42_pci_init(void) { } ++#endif ++ ++#endif /* _AR71XX_DEV_PB42_PCI_H */ +diff -Nur linux-2.6.39.orig/arch/mips/ar71xx/dev-pb9x-pci.c linux-2.6.39/arch/mips/ar71xx/dev-pb9x-pci.c +--- linux-2.6.39.orig/arch/mips/ar71xx/dev-pb9x-pci.c 1970-01-01 01:00:00.000000000 +0100 ++++ linux-2.6.39/arch/mips/ar71xx/dev-pb9x-pci.c 2011-08-24 18:17:23.000000000 +0200 +@@ -0,0 +1,33 @@ ++/* ++ * Atheros PB9x reference board PCI initialization ++ * ++ * Copyright (C) 2010 Felix Fietkau <nbd@openwrt.org> ++ * Copyright (C) 2008-2009 Gabor Juhos <juhosg@openwrt.org> ++ * Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org> ++ * ++ * Parts of this file are based on Atheros' 2.6.15 BSP ++ * ++ * This program is free software; you can redistribute it and/or modify it ++ * under the terms of the GNU General Public License version 2 as published ++ * by the Free Software Foundation. ++ */ ++ ++#include <linux/pci.h> ++ ++#include <asm/mach-ar71xx/ar71xx.h> ++#include <asm/mach-ar71xx/pci.h> ++ ++#include "dev-pb9x-pci.h" ++ ++static struct ar71xx_pci_irq pb9x_pci_irqs[] __initdata = { ++ { ++ .slot = 0, ++ .pin = 1, ++ .irq = AR71XX_PCI_IRQ_DEV0, ++ } ++}; ++ ++void __init pb9x_pci_init(void) ++{ ++ ar71xx_pci_init(ARRAY_SIZE(pb9x_pci_irqs), pb9x_pci_irqs); ++} +diff -Nur linux-2.6.39.orig/arch/mips/ar71xx/dev-pb9x-pci.h linux-2.6.39/arch/mips/ar71xx/dev-pb9x-pci.h +--- linux-2.6.39.orig/arch/mips/ar71xx/dev-pb9x-pci.h 1970-01-01 01:00:00.000000000 +0100 ++++ linux-2.6.39/arch/mips/ar71xx/dev-pb9x-pci.h 2011-08-24 18:17:23.000000000 +0200 +@@ -0,0 +1,22 @@ ++/* ++ * Atheros PB9x reference board PCI initialization ++ * ++ * Copyright (C) 2010 Felix Fietkau <nbd@openwrt.org> ++ * Copyright (C) 2008-2009 Gabor Juhos <juhosg@openwrt.org> ++ * Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org> ++ * ++ * This program is free software; you can redistribute it and/or modify it ++ * under the terms of the GNU General Public License version 2 as published ++ * by the Free Software Foundation. ++ */ ++ ++#ifndef _AR71XX_DEV_PB9X_PCI_H ++#define _AR71XX_DEV_PB9X_PCI_H ++ ++#if defined(CONFIG_AR71XX_DEV_PB9X_PCI) ++void pb9x_pci_init(void) __init; ++#else ++static inline void pb9x_pci_init(void) { } ++#endif ++ ++#endif /* _AR71XX_DEV_PB9X_PCI_H */ +diff -Nur linux-2.6.39.orig/arch/mips/ar71xx/dev-usb.c linux-2.6.39/arch/mips/ar71xx/dev-usb.c +--- linux-2.6.39.orig/arch/mips/ar71xx/dev-usb.c 1970-01-01 01:00:00.000000000 +0100 ++++ linux-2.6.39/arch/mips/ar71xx/dev-usb.c 2011-08-24 18:17:23.000000000 +0200 +@@ -0,0 +1,199 @@ ++/* ++ * Atheros AR71xx USB host device support ++ * ++ * Copyright (C) 2008-2009 Gabor Juhos <juhosg@openwrt.org> ++ * Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org> ++ * ++ * Parts of this file are based on Atheros' 2.6.15 BSP ++ * ++ * This program is free software; you can redistribute it and/or modify it ++ * under the terms of the GNU General Public License version 2 as published ++ * by the Free Software Foundation. ++ */ ++ ++#include <linux/kernel.h> ++#include <linux/init.h> ++#include <linux/delay.h> ++#include <linux/dma-mapping.h> ++#include <linux/platform_device.h> ++ ++#include <asm/mach-ar71xx/ar71xx.h> ++#include <asm/mach-ar71xx/platform.h> ++ ++#include "dev-usb.h" ++ ++/* ++ * OHCI (USB full speed host controller) ++ */ ++static struct resource ar71xx_ohci_resources[] = { ++ [0] = { ++ .start = AR71XX_OHCI_BASE, ++ .end = AR71XX_OHCI_BASE + AR71XX_OHCI_SIZE - 1, ++ .flags = IORESOURCE_MEM, ++ }, ++ [1] = { ++ .start = AR71XX_MISC_IRQ_OHCI, ++ .end = AR71XX_MISC_IRQ_OHCI, ++ .flags = IORESOURCE_IRQ, ++ }, ++}; ++ ++static struct resource ar7240_ohci_resources[] = { ++ [0] = { ++ .start = AR7240_OHCI_BASE, ++ .end = AR7240_OHCI_BASE + AR7240_OHCI_SIZE - 1, ++ .flags = IORESOURCE_MEM, ++ }, ++ [1] = { ++ .start = AR71XX_CPU_IRQ_USB, ++ .end = AR71XX_CPU_IRQ_USB, ++ .flags = IORESOURCE_IRQ, ++ }, ++}; ++ ++static u64 ar71xx_ohci_dmamask = DMA_BIT_MASK(32); ++static struct platform_device ar71xx_ohci_device = { ++ .name = "ar71xx-ohci", ++ .id = -1, ++ .resource = ar71xx_ohci_resources, ++ .num_resources = ARRAY_SIZE(ar71xx_ohci_resources), ++ .dev = { ++ .dma_mask = &ar71xx_ohci_dmamask, ++ .coherent_dma_mask = DMA_BIT_MASK(32), ++ }, ++}; ++ ++/* ++ * EHCI (USB high/full speed host controller) ++ */ ++static struct resource ar71xx_ehci_resources[] = { ++ [0] = { ++ .start = AR71XX_EHCI_BASE, ++ .end = AR71XX_EHCI_BASE + AR71XX_EHCI_SIZE - 1, ++ .flags = IORESOURCE_MEM, ++ }, ++ [1] = { ++ .start = AR71XX_CPU_IRQ_USB, ++ .end = AR71XX_CPU_IRQ_USB, ++ .flags = IORESOURCE_IRQ, ++ }, ++}; ++ ++static u64 ar71xx_ehci_dmamask = DMA_BIT_MASK(32); ++static struct ar71xx_ehci_platform_data ar71xx_ehci_data; ++ ++static struct platform_device ar71xx_ehci_device = { ++ .name = "ar71xx-ehci", ++ .id = -1, ++ .resource = ar71xx_ehci_resources, ++ .num_resources = ARRAY_SIZE(ar71xx_ehci_resources), ++ .dev = { ++ .dma_mask = &ar71xx_ehci_dmamask, ++ .coherent_dma_mask = DMA_BIT_MASK(32), ++ .platform_data = &ar71xx_ehci_data, ++ }, ++}; ++ ++#define AR71XX_USB_RESET_MASK \ ++ (RESET_MODULE_USB_HOST | RESET_MODULE_USB_PHY \ ++ | RESET_MODULE_USB_OHCI_DLL) ++ ++#define AR7240_USB_RESET_MASK \ ++ (RESET_MODULE_USB_HOST | RESET_MODULE_USB_OHCI_DLL_7240) ++ ++static void __init ar71xx_usb_setup(void) ++{ ++ ar71xx_device_stop(AR71XX_USB_RESET_MASK); ++ mdelay(1000); ++ ar71xx_device_start(AR71XX_USB_RESET_MASK); ++ ++ /* Turning on the Buff and Desc swap bits */ ++ ar71xx_usb_ctrl_wr(USB_CTRL_REG_CONFIG, 0xf0000); ++ ++ /* WAR for HW bug. Here it adjusts the duration between two SOFS */ ++ ar71xx_usb_ctrl_wr(USB_CTRL_REG_FLADJ, 0x20c00); ++ ++ mdelay(900); ++ ++ platform_device_register(&ar71xx_ohci_device); ++ platform_device_register(&ar71xx_ehci_device); ++} ++ ++static void __init ar7240_usb_setup(void) ++{ ++ ar71xx_device_stop(AR7240_USB_RESET_MASK); ++ mdelay(1000); ++ ar71xx_device_start(AR7240_USB_RESET_MASK); ++ ++ /* WAR for HW bug. Here it adjusts the duration between two SOFS */ ++ ar71xx_usb_ctrl_wr(USB_CTRL_REG_FLADJ, 0x3); ++ ++ ar71xx_ohci_device.resource = ar7240_ohci_resources; ++ ar71xx_ohci_device.num_resources = ARRAY_SIZE(ar7240_ohci_resources); ++ platform_device_register(&ar71xx_ohci_device); ++} ++ ++static void __init ar7241_usb_setup(void) ++{ ++ ar71xx_device_start(AR724X_RESET_USBSUS_OVERRIDE); ++ mdelay(10); ++ ++ ar71xx_device_start(AR724X_RESET_USB_HOST); ++ mdelay(10); ++ ++ ar71xx_device_start(AR724X_RESET_USB_PHY); ++ mdelay(10); ++ ++ ar71xx_ehci_data.is_ar91xx = 1; ++ ar71xx_ehci_device.resource = ar7240_ohci_resources; ++ ar71xx_ehci_device.num_resources = ARRAY_SIZE(ar7240_ohci_resources); ++ platform_device_register(&ar71xx_ehci_device); ++} ++ ++static void __init ar91xx_usb_setup(void) ++{ ++ ar71xx_device_stop(RESET_MODULE_USBSUS_OVERRIDE); ++ mdelay(10); ++ ++ ar71xx_device_start(RESET_MODULE_USB_HOST); ++ mdelay(10); ++ ++ ar71xx_device_start(RESET_MODULE_USB_PHY); ++ mdelay(10); ++ ++ ar71xx_ehci_data.is_ar91xx = 1; ++ platform_device_register(&ar71xx_ehci_device); ++} ++ ++void __init ar71xx_add_device_usb(void) ++{ ++ switch (ar71xx_soc) { ++ case AR71XX_SOC_AR7240: ++ ar7240_usb_setup(); ++ break; ++ ++ case AR71XX_SOC_AR7241: ++ case AR71XX_SOC_AR7242: ++ ar7241_usb_setup(); ++ break; ++ ++ case AR71XX_SOC_AR7130: ++ case AR71XX_SOC_AR7141: ++ case AR71XX_SOC_AR7161: ++ ar71xx_usb_setup(); ++ break; ++ ++ case AR71XX_SOC_AR9130: ++ case AR71XX_SOC_AR9132: ++ case AR71XX_SOC_AR9330: ++ case AR71XX_SOC_AR9331: ++ case AR71XX_SOC_AR9341: ++ case AR71XX_SOC_AR9342: ++ case AR71XX_SOC_AR9344: ++ ar91xx_usb_setup(); ++ break; ++ ++ default: ++ BUG(); ++ } ++} +diff -Nur linux-2.6.39.orig/arch/mips/ar71xx/dev-usb.h linux-2.6.39/arch/mips/ar71xx/dev-usb.h +--- linux-2.6.39.orig/arch/mips/ar71xx/dev-usb.h 1970-01-01 01:00:00.000000000 +0100 ++++ linux-2.6.39/arch/mips/ar71xx/dev-usb.h 2011-08-24 18:17:23.000000000 +0200 +@@ -0,0 +1,17 @@ ++/* ++ * Atheros AR71xx USB host device support ++ * ++ * Copyright (C) 2008-2009 Gabor Juhos <juhosg@openwrt.org> ++ * Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org> ++ * ++ * This program is free software; you can redistribute it and/or modify it ++ * under the terms of the GNU General Public License version 2 as published ++ * by the Free Software Foundation. ++ */ ++ ++#ifndef _AR71XX_DEV_USB_H ++#define _AR71XX_DEV_USB_H ++ ++void ar71xx_add_device_usb(void) __init; ++ ++#endif /* _AR71XX_DEV_USB_H */ diff -Nur linux-2.6.39.orig/arch/mips/ar71xx/devices.c linux-2.6.39/arch/mips/ar71xx/devices.c --- linux-2.6.39.orig/arch/mips/ar71xx/devices.c 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.39/arch/mips/ar71xx/devices.c 2011-08-24 02:41:55.347990727 +0200 ++++ linux-2.6.39/arch/mips/ar71xx/devices.c 2011-08-24 18:17:23.000000000 +0200 @@ -0,0 +1,765 @@ +/* + * Atheros AR71xx SoC platform devices @@ -1665,7 +2726,7 @@ diff -Nur linux-2.6.39.orig/arch/mips/ar71xx/devices.c linux-2.6.39/arch/mips/ar +} diff -Nur linux-2.6.39.orig/arch/mips/ar71xx/devices.h linux-2.6.39/arch/mips/ar71xx/devices.h --- linux-2.6.39.orig/arch/mips/ar71xx/devices.h 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.39/arch/mips/ar71xx/devices.h 2011-08-24 02:41:55.347990727 +0200 ++++ linux-2.6.39/arch/mips/ar71xx/devices.h 2011-08-24 18:17:23.000000000 +0200 @@ -0,0 +1,50 @@ +/* + * Atheros AR71xx SoC device definitions @@ -1717,505 +2778,9 @@ diff -Nur linux-2.6.39.orig/arch/mips/ar71xx/devices.h linux-2.6.39/arch/mips/ar +void ar71xx_add_device_wdt(void) __init; + +#endif /* __AR71XX_DEVICES_H */ -diff -Nur linux-2.6.39.orig/arch/mips/ar71xx/dev-leds-gpio.c linux-2.6.39/arch/mips/ar71xx/dev-leds-gpio.c ---- linux-2.6.39.orig/arch/mips/ar71xx/dev-leds-gpio.c 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.39/arch/mips/ar71xx/dev-leds-gpio.c 2011-08-24 02:41:55.347990727 +0200 -@@ -0,0 +1,57 @@ -+/* -+ * Atheros AR71xx GPIO LED device support -+ * -+ * Copyright (C) 2008-2009 Gabor Juhos <juhosg@openwrt.org> -+ * Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org> -+ * -+ * Parts of this file are based on Atheros' 2.6.15 BSP -+ * -+ * This program is free software; you can redistribute it and/or modify it -+ * under the terms of the GNU General Public License version 2 as published -+ * by the Free Software Foundation. -+ */ -+ -+#include <linux/init.h> -+#include <linux/slab.h> -+#include <linux/platform_device.h> -+ -+#include "dev-leds-gpio.h" -+ -+void __init ar71xx_add_device_leds_gpio(int id, unsigned num_leds, -+ struct gpio_led *leds) -+{ -+ struct platform_device *pdev; -+ struct gpio_led_platform_data pdata; -+ struct gpio_led *p; -+ int err; -+ -+ p = kmalloc(num_leds * sizeof(*p), GFP_KERNEL); -+ if (!p) -+ return; -+ -+ memcpy(p, leds, num_leds * sizeof(*p)); -+ -+ pdev = platform_device_alloc("leds-gpio", id); -+ if (!pdev) -+ goto err_free_leds; -+ -+ memset(&pdata, 0, sizeof(pdata)); -+ pdata.num_leds = num_leds; -+ pdata.leds = p; -+ -+ err = platform_device_add_data(pdev, &pdata, sizeof(pdata)); -+ if (err) -+ goto err_put_pdev; -+ -+ err = platform_device_add(pdev); -+ if (err) -+ goto err_put_pdev; -+ -+ return; -+ -+err_put_pdev: -+ platform_device_put(pdev); -+ -+err_free_leds: -+ kfree(p); -+} -diff -Nur linux-2.6.39.orig/arch/mips/ar71xx/dev-leds-gpio.h linux-2.6.39/arch/mips/ar71xx/dev-leds-gpio.h ---- linux-2.6.39.orig/arch/mips/ar71xx/dev-leds-gpio.h 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.39/arch/mips/ar71xx/dev-leds-gpio.h 2011-08-24 02:41:55.367990903 +0200 -@@ -0,0 +1,21 @@ -+/* -+ * Atheros AR71xx GPIO LED device support -+ * -+ * Copyright (C) 2008-2009 Gabor Juhos <juhosg@openwrt.org> -+ * Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org> -+ * -+ * This program is free software; you can redistribute it and/or modify it -+ * under the terms of the GNU General Public License version 2 as published -+ * by the Free Software Foundation. -+ */ -+ -+#ifndef _AR71XX_DEV_LEDS_GPIO_H -+#define _AR71XX_DEV_LEDS_GPIO_H -+ -+#include <linux/leds.h> -+ -+void ar71xx_add_device_leds_gpio(int id, -+ unsigned num_leds, -+ struct gpio_led *leds) __init; -+ -+#endif /* _AR71XX_DEV_LEDS_GPIO_H */ -diff -Nur linux-2.6.39.orig/arch/mips/ar71xx/dev-m25p80.c linux-2.6.39/arch/mips/ar71xx/dev-m25p80.c ---- linux-2.6.39.orig/arch/mips/ar71xx/dev-m25p80.c 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.39/arch/mips/ar71xx/dev-m25p80.c 2011-08-24 02:41:55.367990903 +0200 -@@ -0,0 +1,30 @@ -+/* -+ * Copyright (C) 2009 Gabor Juhos <juhosg@openwrt.org> -+ * -+ * This program is free software; you can redistribute it and/or modify it -+ * under the terms of the GNU General Public License version 2 as published -+ * by the Free Software Foundation. -+ */ -+ -+#include <linux/init.h> -+#include <linux/spi/spi.h> -+#include <linux/spi/flash.h> -+ -+#include "devices.h" -+#include "dev-m25p80.h" -+ -+static struct spi_board_info ar71xx_spi_info[] = { -+ { -+ .bus_num = 0, -+ .chip_select = 0, -+ .max_speed_hz = 25000000, -+ .modalias = "m25p80", -+ } -+}; -+ -+void __init ar71xx_add_device_m25p80(struct flash_platform_data *pdata) -+{ -+ ar71xx_spi_info[0].platform_data = pdata; -+ ar71xx_add_device_spi(NULL, ar71xx_spi_info, -+ ARRAY_SIZE(ar71xx_spi_info)); -+} -diff -Nur linux-2.6.39.orig/arch/mips/ar71xx/dev-m25p80.h linux-2.6.39/arch/mips/ar71xx/dev-m25p80.h ---- linux-2.6.39.orig/arch/mips/ar71xx/dev-m25p80.h 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.39/arch/mips/ar71xx/dev-m25p80.h 2011-08-24 02:41:55.377990515 +0200 -@@ -0,0 +1,16 @@ -+/* -+ * Copyright (C) 2009 Gabor Juhos <juhosg@openwrt.org> -+ * -+ * This program is free software; you can redistribute it and/or modify it -+ * under the terms of the GNU General Public License version 2 as published -+ * by the Free Software Foundation. -+ */ -+ -+#ifndef _AR71XX_DEV_M25P80_H -+#define _AR71XX_DEV_M25P80_H -+ -+#include <linux/spi/flash.h> -+ -+void ar71xx_add_device_m25p80(struct flash_platform_data *pdata) __init; -+ -+#endif /* _AR71XX_DEV_M25P80_H */ -diff -Nur linux-2.6.39.orig/arch/mips/ar71xx/dev-pb42-pci.c linux-2.6.39/arch/mips/ar71xx/dev-pb42-pci.c ---- linux-2.6.39.orig/arch/mips/ar71xx/dev-pb42-pci.c 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.39/arch/mips/ar71xx/dev-pb42-pci.c 2011-08-24 02:41:55.377990515 +0200 -@@ -0,0 +1,40 @@ -+/* -+ * Atheros PB42 reference board PCI initialization -+ * -+ * Copyright (C) 2008-2009 Gabor Juhos <juhosg@openwrt.org> -+ * Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org> -+ * -+ * Parts of this file are based on Atheros' 2.6.15 BSP -+ * -+ * This program is free software; you can redistribute it and/or modify it -+ * under the terms of the GNU General Public License version 2 as published -+ * by the Free Software Foundation. -+ */ -+ -+#include <linux/pci.h> -+ -+#include <asm/mach-ar71xx/ar71xx.h> -+#include <asm/mach-ar71xx/pci.h> -+ -+#include "dev-pb42-pci.h" -+ -+static struct ar71xx_pci_irq pb42_pci_irqs[] __initdata = { -+ { -+ .slot = 0, -+ .pin = 1, -+ .irq = AR71XX_PCI_IRQ_DEV0, -+ }, { -+ .slot = 1, -+ .pin = 1, -+ .irq = AR71XX_PCI_IRQ_DEV1, -+ }, { -+ .slot = 2, -+ .pin = 1, -+ .irq = AR71XX_PCI_IRQ_DEV2, -+ } -+}; -+ -+void __init pb42_pci_init(void) -+{ -+ ar71xx_pci_init(ARRAY_SIZE(pb42_pci_irqs), pb42_pci_irqs); -+} -diff -Nur linux-2.6.39.orig/arch/mips/ar71xx/dev-pb42-pci.h linux-2.6.39/arch/mips/ar71xx/dev-pb42-pci.h ---- linux-2.6.39.orig/arch/mips/ar71xx/dev-pb42-pci.h 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.39/arch/mips/ar71xx/dev-pb42-pci.h 2011-08-24 02:41:55.387991243 +0200 -@@ -0,0 +1,21 @@ -+/* -+ * Atheros PB42 reference board PCI initialization -+ * -+ * Copyright (C) 2008-2009 Gabor Juhos <juhosg@openwrt.org> -+ * Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org> -+ * -+ * This program is free software; you can redistribute it and/or modify it -+ * under the terms of the GNU General Public License version 2 as published -+ * by the Free Software Foundation. -+ */ -+ -+#ifndef _AR71XX_DEV_PB42_PCI_H -+#define _AR71XX_DEV_PB42_PCI_H -+ -+#if defined(CONFIG_AR71XX_DEV_PB42_PCI) -+void pb42_pci_init(void) __init; -+#else -+static inline void pb42_pci_init(void) { } -+#endif -+ -+#endif /* _AR71XX_DEV_PB42_PCI_H */ -diff -Nur linux-2.6.39.orig/arch/mips/ar71xx/dev-pb9x-pci.c linux-2.6.39/arch/mips/ar71xx/dev-pb9x-pci.c ---- linux-2.6.39.orig/arch/mips/ar71xx/dev-pb9x-pci.c 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.39/arch/mips/ar71xx/dev-pb9x-pci.c 2011-08-24 02:41:55.387991243 +0200 -@@ -0,0 +1,33 @@ -+/* -+ * Atheros PB9x reference board PCI initialization -+ * -+ * Copyright (C) 2010 Felix Fietkau <nbd@openwrt.org> -+ * Copyright (C) 2008-2009 Gabor Juhos <juhosg@openwrt.org> -+ * Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org> -+ * -+ * Parts of this file are based on Atheros' 2.6.15 BSP -+ * -+ * This program is free software; you can redistribute it and/or modify it -+ * under the terms of the GNU General Public License version 2 as published -+ * by the Free Software Foundation. -+ */ -+ -+#include <linux/pci.h> -+ -+#include <asm/mach-ar71xx/ar71xx.h> -+#include <asm/mach-ar71xx/pci.h> -+ -+#include "dev-pb9x-pci.h" -+ -+static struct ar71xx_pci_irq pb9x_pci_irqs[] __initdata = { -+ { -+ .slot = 0, -+ .pin = 1, -+ .irq = AR71XX_PCI_IRQ_DEV0, -+ } -+}; -+ -+void __init pb9x_pci_init(void) -+{ -+ ar71xx_pci_init(ARRAY_SIZE(pb9x_pci_irqs), pb9x_pci_irqs); -+} -diff -Nur linux-2.6.39.orig/arch/mips/ar71xx/dev-pb9x-pci.h linux-2.6.39/arch/mips/ar71xx/dev-pb9x-pci.h ---- linux-2.6.39.orig/arch/mips/ar71xx/dev-pb9x-pci.h 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.39/arch/mips/ar71xx/dev-pb9x-pci.h 2011-08-24 02:41:55.387991243 +0200 -@@ -0,0 +1,22 @@ -+/* -+ * Atheros PB9x reference board PCI initialization -+ * -+ * Copyright (C) 2010 Felix Fietkau <nbd@openwrt.org> -+ * Copyright (C) 2008-2009 Gabor Juhos <juhosg@openwrt.org> -+ * Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org> -+ * -+ * This program is free software; you can redistribute it and/or modify it -+ * under the terms of the GNU General Public License version 2 as published -+ * by the Free Software Foundation. -+ */ -+ -+#ifndef _AR71XX_DEV_PB9X_PCI_H -+#define _AR71XX_DEV_PB9X_PCI_H -+ -+#if defined(CONFIG_AR71XX_DEV_PB9X_PCI) -+void pb9x_pci_init(void) __init; -+#else -+static inline void pb9x_pci_init(void) { } -+#endif -+ -+#endif /* _AR71XX_DEV_PB9X_PCI_H */ -diff -Nur linux-2.6.39.orig/arch/mips/ar71xx/dev-usb.c linux-2.6.39/arch/mips/ar71xx/dev-usb.c ---- linux-2.6.39.orig/arch/mips/ar71xx/dev-usb.c 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.39/arch/mips/ar71xx/dev-usb.c 2011-08-24 02:41:55.417990329 +0200 -@@ -0,0 +1,199 @@ -+/* -+ * Atheros AR71xx USB host device support -+ * -+ * Copyright (C) 2008-2009 Gabor Juhos <juhosg@openwrt.org> -+ * Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org> -+ * -+ * Parts of this file are based on Atheros' 2.6.15 BSP -+ * -+ * This program is free software; you can redistribute it and/or modify it -+ * under the terms of the GNU General Public License version 2 as published -+ * by the Free Software Foundation. -+ */ -+ -+#include <linux/kernel.h> -+#include <linux/init.h> -+#include <linux/delay.h> -+#include <linux/dma-mapping.h> -+#include <linux/platform_device.h> -+ -+#include <asm/mach-ar71xx/ar71xx.h> -+#include <asm/mach-ar71xx/platform.h> -+ -+#include "dev-usb.h" -+ -+/* -+ * OHCI (USB full speed host controller) -+ */ -+static struct resource ar71xx_ohci_resources[] = { -+ [0] = { -+ .start = AR71XX_OHCI_BASE, -+ .end = AR71XX_OHCI_BASE + AR71XX_OHCI_SIZE - 1, -+ .flags = IORESOURCE_MEM, -+ }, -+ [1] = { -+ .start = AR71XX_MISC_IRQ_OHCI, -+ .end = AR71XX_MISC_IRQ_OHCI, -+ .flags = IORESOURCE_IRQ, -+ }, -+}; -+ -+static struct resource ar7240_ohci_resources[] = { -+ [0] = { -+ .start = AR7240_OHCI_BASE, -+ .end = AR7240_OHCI_BASE + AR7240_OHCI_SIZE - 1, -+ .flags = IORESOURCE_MEM, -+ }, -+ [1] = { -+ .start = AR71XX_CPU_IRQ_USB, -+ .end = AR71XX_CPU_IRQ_USB, -+ .flags = IORESOURCE_IRQ, -+ }, -+}; -+ -+static u64 ar71xx_ohci_dmamask = DMA_BIT_MASK(32); -+static struct platform_device ar71xx_ohci_device = { -+ .name = "ar71xx-ohci", -+ .id = -1, -+ .resource = ar71xx_ohci_resources, -+ .num_resources = ARRAY_SIZE(ar71xx_ohci_resources), -+ .dev = { -+ .dma_mask = &ar71xx_ohci_dmamask, -+ .coherent_dma_mask = DMA_BIT_MASK(32), -+ }, -+}; -+ -+/* -+ * EHCI (USB high/full speed host controller) -+ */ -+static struct resource ar71xx_ehci_resources[] = { -+ [0] = { -+ .start = AR71XX_EHCI_BASE, -+ .end = AR71XX_EHCI_BASE + AR71XX_EHCI_SIZE - 1, -+ .flags = IORESOURCE_MEM, -+ }, -+ [1] = { -+ .start = AR71XX_CPU_IRQ_USB, -+ .end = AR71XX_CPU_IRQ_USB, -+ .flags = IORESOURCE_IRQ, -+ }, -+}; -+ -+static u64 ar71xx_ehci_dmamask = DMA_BIT_MASK(32); -+static struct ar71xx_ehci_platform_data ar71xx_ehci_data; -+ -+static struct platform_device ar71xx_ehci_device = { -+ .name = "ar71xx-ehci", -+ .id = -1, -+ .resource = ar71xx_ehci_resources, -+ .num_resources = ARRAY_SIZE(ar71xx_ehci_resources), -+ .dev = { -+ .dma_mask = &ar71xx_ehci_dmamask, -+ .coherent_dma_mask = DMA_BIT_MASK(32), -+ .platform_data = &ar71xx_ehci_data, -+ }, -+}; -+ -+#define AR71XX_USB_RESET_MASK \ -+ (RESET_MODULE_USB_HOST | RESET_MODULE_USB_PHY \ -+ | RESET_MODULE_USB_OHCI_DLL) -+ -+#define AR7240_USB_RESET_MASK \ -+ (RESET_MODULE_USB_HOST | RESET_MODULE_USB_OHCI_DLL_7240) -+ -+static void __init ar71xx_usb_setup(void) -+{ -+ ar71xx_device_stop(AR71XX_USB_RESET_MASK); -+ mdelay(1000); -+ ar71xx_device_start(AR71XX_USB_RESET_MASK); -+ -+ /* Turning on the Buff and Desc swap bits */ -+ ar71xx_usb_ctrl_wr(USB_CTRL_REG_CONFIG, 0xf0000); -+ -+ /* WAR for HW bug. Here it adjusts the duration between two SOFS */ -+ ar71xx_usb_ctrl_wr(USB_CTRL_REG_FLADJ, 0x20c00); -+ -+ mdelay(900); -+ -+ platform_device_register(&ar71xx_ohci_device); -+ platform_device_register(&ar71xx_ehci_device); -+} -+ -+static void __init ar7240_usb_setup(void) -+{ -+ ar71xx_device_stop(AR7240_USB_RESET_MASK); -+ mdelay(1000); -+ ar71xx_device_start(AR7240_USB_RESET_MASK); -+ -+ /* WAR for HW bug. Here it adjusts the duration between two SOFS */ -+ ar71xx_usb_ctrl_wr(USB_CTRL_REG_FLADJ, 0x3); -+ -+ ar71xx_ohci_device.resource = ar7240_ohci_resources; -+ ar71xx_ohci_device.num_resources = ARRAY_SIZE(ar7240_ohci_resources); -+ platform_device_register(&ar71xx_ohci_device); -+} -+ -+static void __init ar7241_usb_setup(void) -+{ -+ ar71xx_device_start(AR724X_RESET_USBSUS_OVERRIDE); -+ mdelay(10); -+ -+ ar71xx_device_start(AR724X_RESET_USB_HOST); -+ mdelay(10); -+ -+ ar71xx_device_start(AR724X_RESET_USB_PHY); -+ mdelay(10); -+ -+ ar71xx_ehci_data.is_ar91xx = 1; -+ ar71xx_ehci_device.resource = ar7240_ohci_resources; -+ ar71xx_ehci_device.num_resources = ARRAY_SIZE(ar7240_ohci_resources); -+ platform_device_register(&ar71xx_ehci_device); -+} -+ -+static void __init ar91xx_usb_setup(void) -+{ -+ ar71xx_device_stop(RESET_MODULE_USBSUS_OVERRIDE); -+ mdelay(10); -+ -+ ar71xx_device_start(RESET_MODULE_USB_HOST); -+ mdelay(10); -+ -+ ar71xx_device_start(RESET_MODULE_USB_PHY); -+ mdelay(10); -+ -+ ar71xx_ehci_data.is_ar91xx = 1; -+ platform_device_register(&ar71xx_ehci_device); -+} -+ -+void __init ar71xx_add_device_usb(void) -+{ -+ switch (ar71xx_soc) { -+ case AR71XX_SOC_AR7240: -+ ar7240_usb_setup(); -+ break; -+ -+ case AR71XX_SOC_AR7241: -+ case AR71XX_SOC_AR7242: -+ ar7241_usb_setup(); -+ break; -+ -+ case AR71XX_SOC_AR7130: -+ case AR71XX_SOC_AR7141: -+ case AR71XX_SOC_AR7161: -+ ar71xx_usb_setup(); -+ break; -+ -+ case AR71XX_SOC_AR9130: -+ case AR71XX_SOC_AR9132: -+ case AR71XX_SOC_AR9330: -+ case AR71XX_SOC_AR9331: -+ case AR71XX_SOC_AR9341: -+ case AR71XX_SOC_AR9342: -+ case AR71XX_SOC_AR9344: -+ ar91xx_usb_setup(); -+ break; -+ -+ default: -+ BUG(); -+ } -+} -diff -Nur linux-2.6.39.orig/arch/mips/ar71xx/dev-usb.h linux-2.6.39/arch/mips/ar71xx/dev-usb.h ---- linux-2.6.39.orig/arch/mips/ar71xx/dev-usb.h 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.39/arch/mips/ar71xx/dev-usb.h 2011-08-24 02:41:55.427989786 +0200 -@@ -0,0 +1,17 @@ -+/* -+ * Atheros AR71xx USB host device support -+ * -+ * Copyright (C) 2008-2009 Gabor Juhos <juhosg@openwrt.org> -+ * Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org> -+ * -+ * This program is free software; you can redistribute it and/or modify it -+ * under the terms of the GNU General Public License version 2 as published -+ * by the Free Software Foundation. -+ */ -+ -+#ifndef _AR71XX_DEV_USB_H -+#define _AR71XX_DEV_USB_H -+ -+void ar71xx_add_device_usb(void) __init; -+ -+#endif /* _AR71XX_DEV_USB_H */ diff -Nur linux-2.6.39.orig/arch/mips/ar71xx/early_printk.c linux-2.6.39/arch/mips/ar71xx/early_printk.c --- linux-2.6.39.orig/arch/mips/ar71xx/early_printk.c 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.39/arch/mips/ar71xx/early_printk.c 2011-08-24 02:41:55.427989786 +0200 ++++ linux-2.6.39/arch/mips/ar71xx/early_printk.c 2011-08-24 18:17:23.000000000 +0200 @@ -0,0 +1,96 @@ +/* + * Atheros AR7xxx/AR9xxx SoC early printk support @@ -2315,7 +2880,7 @@ diff -Nur linux-2.6.39.orig/arch/mips/ar71xx/early_printk.c linux-2.6.39/arch/mi +} diff -Nur linux-2.6.39.orig/arch/mips/ar71xx/gpio.c linux-2.6.39/arch/mips/ar71xx/gpio.c --- linux-2.6.39.orig/arch/mips/ar71xx/gpio.c 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.39/arch/mips/ar71xx/gpio.c 2011-08-24 02:41:55.457989607 +0200 ++++ linux-2.6.39/arch/mips/ar71xx/gpio.c 2011-08-24 18:17:23.000000000 +0200 @@ -0,0 +1,193 @@ +/* + * Atheros AR7XXX/AR9XXX SoC GPIO API support @@ -2512,7 +3077,7 @@ diff -Nur linux-2.6.39.orig/arch/mips/ar71xx/gpio.c linux-2.6.39/arch/mips/ar71x +} diff -Nur linux-2.6.39.orig/arch/mips/ar71xx/irq.c linux-2.6.39/arch/mips/ar71xx/irq.c --- linux-2.6.39.orig/arch/mips/ar71xx/irq.c 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.39/arch/mips/ar71xx/irq.c 2011-08-24 02:41:55.457989607 +0200 ++++ linux-2.6.39/arch/mips/ar71xx/irq.c 2011-08-24 18:17:23.000000000 +0200 @@ -0,0 +1,377 @@ +/* + * Atheros AR71xx SoC specific interrupt handling @@ -2891,433 +3456,9 @@ diff -Nur linux-2.6.39.orig/arch/mips/ar71xx/irq.c linux-2.6.39/arch/mips/ar71xx + + ar71xx_gpio_irq_init(); +} -diff -Nur linux-2.6.39.orig/arch/mips/ar71xx/Kconfig linux-2.6.39/arch/mips/ar71xx/Kconfig ---- linux-2.6.39.orig/arch/mips/ar71xx/Kconfig 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.39/arch/mips/ar71xx/Kconfig 2011-08-24 04:20:27.209240389 +0200 -@@ -0,0 +1,420 @@ -+if ATHEROS_AR71XX -+ -+menu "Atheros AR71xx machine selection" -+ -+config AR71XX_MACH_AP81 -+ bool "Atheros AP81 board support" -+ select SOC_AR913X -+ select AR71XX_DEV_M25P80 -+ select AR71XX_DEV_AR9XXX_WMAC -+ select AR71XX_DEV_GPIO_BUTTONS -+ select AR71XX_DEV_LEDS_GPIO -+ select AR71XX_DEV_USB -+ default n -+ -+config AR71XX_MACH_AP83 -+ bool "Atheros AP83 board support" -+ select SOC_AR913X -+ select AR71XX_DEV_AR9XXX_WMAC -+ select AR71XX_DEV_GPIO_BUTTONS -+ select AR71XX_DEV_LEDS_GPIO -+ select AR71XX_DEV_USB -+ default n -+ -+config AR71XX_MACH_AP96 -+ bool "Atheros AP96 board support" -+ select SOC_AR71XX -+ select AR71XX_DEV_M25P80 -+ select AR71XX_DEV_AP94_PCI if PCI -+ select AR71XX_DEV_GPIO_BUTTONS -+ select AR71XX_DEV_LEDS_GPIO -+ select AR71XX_DEV_USB -+ default n -+ -+config AR71XX_MACH_AP121 -+ bool "Atheros AP121 board support" -+ select AR71XX_DEV_M25P80 -+ select AR71XX_DEV_GPIO_BUTTONS -+ select AR71XX_DEV_LEDS_GPIO -+ select AR71XX_DEV_USB -+ select AR71XX_DEV_AR9XXX_WMAC -+ select SOC_AR933X -+ default n -+ -+config AR71XX_MACH_DB120 -+ bool "Atheros DB120 board support" -+ select SOC_AR934X -+ select AR71XX_DEV_AR9XXX_WMAC -+ select AR71XX_DEV_DB120_PCI if PCI -+ select AR71XX_DEV_GPIO_BUTTONS -+ select AR71XX_DEV_LEDS_GPIO -+ select AR71XX_DEV_USB -+ default n -+ -+config AR71XX_MACH_DIR_600_A1 -+ bool "D-Link DIR-600 rev. A1 support" -+ select SOC_AR724X -+ select AR71XX_DEV_AP91_PCI if PCI -+ select AR71XX_DEV_M25P80 -+ select AR71XX_DEV_GPIO_BUTTONS -+ select AR71XX_DEV_LEDS_GPIO -+ select AR71XX_NVRAM -+ default n -+ -+config AR71XX_MACH_DIR_615_C1 -+ bool "D-Link DIR-615 rev. C1 support" -+ select SOC_AR913X -+ select AR71XX_DEV_M25P80 -+ select AR71XX_DEV_AR9XXX_WMAC -+ select AR71XX_DEV_GPIO_BUTTONS -+ select AR71XX_DEV_LEDS_GPIO -+ select AR71XX_NVRAM -+ default n -+ -+config AR71XX_MACH_DIR_825_B1 -+ bool "D-Link DIR-825 rev. B1 board support" -+ select SOC_AR71XX -+ select AR71XX_DEV_M25P80 -+ select AR71XX_DEV_AP94_PCI if PCI -+ select AR71XX_DEV_GPIO_BUTTONS -+ select AR71XX_DEV_LEDS_GPIO -+ select AR71XX_DEV_USB -+ default n -+ -+config AR71XX_MACH_JA76PF -+ bool "jjPlus JA76PF board support" -+ select SOC_AR71XX -+ select AR71XX_DEV_M25P80 -+ select AR71XX_DEV_GPIO_BUTTONS -+ select AR71XX_DEV_PB42_PCI if PCI -+ select AR71XX_DEV_LEDS_GPIO -+ select AR71XX_DEV_USB -+ default n -+ -+config AR71XX_MACH_JWAP003 -+ bool "jjPlus JWAP003 board support" -+ select SOC_AR71XX -+ select AR71XX_DEV_M25P80 -+ select AR71XX_DEV_GPIO_BUTTONS -+ select AR71XX_DEV_PB42_PCI if PCI -+ select AR71XX_DEV_USB -+ default n -+ -+config AR71XX_MACH_PB42 -+ bool "Atheros PB42 board support" -+ select SOC_AR71XX -+ select AR71XX_DEV_M25P80 -+ select AR71XX_DEV_GPIO_BUTTONS -+ select AR71XX_DEV_PB42_PCI if PCI -+ default n -+ -+config AR71XX_MACH_PB44 -+ bool "Atheros PB44 board support" -+ select SOC_AR71XX -+ select AR71XX_DEV_GPIO_BUTTONS -+ select AR71XX_DEV_PB42_PCI if PCI -+ select AR71XX_DEV_LEDS_GPIO -+ select AR71XX_DEV_USB -+ default n -+ -+config AR71XX_MACH_PB92 -+ bool "Atheros PB92 board support" -+ select SOC_AR724X -+ select AR71XX_DEV_GPIO_BUTTONS -+ select AR71XX_DEV_PB9X_PCI if PCI -+ select AR71XX_DEV_LEDS_GPIO -+ select AR71XX_DEV_USB -+ default n -+ -+config AR71XX_MACH_AW_NR580 -+ bool "AzureWave AW-NR580 board support" -+ select SOC_AR71XX -+ select AR71XX_DEV_M25P80 -+ select AR71XX_DEV_GPIO_BUTTONS -+ select AR71XX_DEV_PB42_PCI if PCI -+ select AR71XX_DEV_LEDS_GPIO -+ default n -+ -+config AR71XX_MACH_WZR_HP_AG300H -+ bool "Buffalo WZR-HP-AG300H board support" -+ select SOC_AR71XX -+ select AR71XX_DEV_M25P80 -+ select AR71XX_DEV_GPIO_BUTTONS -+ select AR71XX_DEV_LEDS_GPIO -+ select AR71XX_DEV_USB -+ default n -+ -+config AR71XX_MACH_WZR_HP_G300NH -+ bool "Buffalo WZR-HP-G300NH board support" -+ select SOC_AR913X -+ select AR71XX_DEV_AR9XXX_WMAC -+ select AR71XX_DEV_GPIO_BUTTONS -+ select AR71XX_DEV_LEDS_GPIO -+ select AR71XX_DEV_USB -+ select RTL8366_SMI -+ default n -+ -+config AR71XX_MACH_WP543 -+ bool "Compex WP543/WPJ543 board support" -+ select SOC_AR71XX -+ select MYLOADER -+ select AR71XX_DEV_M25P80 -+ select AR71XX_DEV_GPIO_BUTTONS -+ select AR71XX_DEV_PB42_PCI if PCI -+ select AR71XX_DEV_LEDS_GPIO -+ select AR71XX_DEV_USB -+ default n -+ -+config AR71XX_MACH_WRT160NL -+ bool "Linksys WRT160NL board support" -+ select SOC_AR913X -+ select AR71XX_DEV_M25P80 -+ select AR71XX_DEV_AR9XXX_WMAC -+ select AR71XX_DEV_GPIO_BUTTONS -+ select AR71XX_DEV_LEDS_GPIO -+ select AR71XX_DEV_USB -+ select AR71XX_NVRAM -+ default n -+ -+config AR71XX_MACH_WRT400N -+ bool "Linksys WRT400N board support" -+ select SOC_AR71XX -+ select AR71XX_DEV_AP94_PCI if PCI -+ select AR71XX_DEV_M25P80 -+ select AR71XX_DEV_GPIO_BUTTONS -+ select AR71XX_DEV_LEDS_GPIO -+ default n -+ -+config AR71XX_MACH_RB4XX -+ bool "MikroTik RouterBOARD 4xx series support" -+ select SOC_AR71XX -+ select AR71XX_DEV_GPIO_BUTTONS -+ select AR71XX_DEV_LEDS_GPIO -+ select AR71XX_DEV_USB -+ default n -+ -+config AR71XX_MACH_RB750 -+ bool "MikroTik RouterBOARD 750 support" -+ select SOC_AR724X -+ default n -+ -+config AR71XX_MACH_WNDR3700 -+ bool "NETGEAR WNDR3700 board support" -+ select SOC_AR71XX -+ select AR71XX_DEV_M25P80 -+ select AR71XX_DEV_AP94_PCI if PCI -+ select AR71XX_DEV_GPIO_BUTTONS -+ select AR71XX_DEV_LEDS_GPIO -+ select AR71XX_DEV_USB -+ default n -+ -+config AR71XX_MACH_WNR2000 -+ bool "NETGEAR WNR2000 board support" -+ select SOC_AR913X -+ select AR71XX_DEV_M25P80 -+ select AR71XX_DEV_AR9XXX_WMAC -+ select AR71XX_DEV_GPIO_BUTTONS -+ select AR71XX_DEV_LEDS_GPIO -+ default n -+ -+config AR71XX_MACH_MZK_W04NU -+ bool "Planex MZK-W04NU board support" -+ select SOC_AR913X -+ select AR71XX_DEV_M25P80 -+ select AR71XX_DEV_AR9XXX_WMAC -+ select AR71XX_DEV_GPIO_BUTTONS -+ select AR71XX_DEV_LEDS_GPIO -+ select AR71XX_DEV_USB -+ default n -+ -+config AR71XX_MACH_MZK_W300NH -+ bool "Planex MZK-W300NH board support" -+ select SOC_AR913X -+ select AR71XX_DEV_M25P80 -+ select AR71XX_DEV_AR9XXX_WMAC -+ select AR71XX_DEV_GPIO_BUTTONS -+ select AR71XX_DEV_LEDS_GPIO -+ default n -+ -+config AR71XX_MACH_NBG460N -+ bool "Zyxel NBG460N/550N/550NH board support" -+ select SOC_AR913X -+ select AR71XX_DEV_M25P80 -+ select AR71XX_DEV_AR9XXX_WMAC -+ select AR71XX_DEV_GPIO_BUTTONS -+ select AR71XX_DEV_LEDS_GPIO -+ default n -+ -+config AR71XX_MACH_TL_MR3X20 -+ bool "TP-LINK TL-MR3220/3420 support" -+ select SOC_AR724X -+ select AR71XX_DEV_M25P80 -+ select AR71XX_DEV_AP91_PCI if PCI -+ select AR71XX_DEV_GPIO_BUTTONS -+ select AR71XX_DEV_LEDS_GPIO -+ select AR71XX_DEV_USB -+ default n -+ -+config AR71XX_MACH_TL_WA901ND -+ bool "TP-LINK TL-WA901ND support" -+ select SOC_AR724X -+ select AR71XX_DEV_M25P80 -+ select AR71XX_DEV_AP91_PCI if PCI -+ select AR71XX_DEV_GPIO_BUTTONS -+ select AR71XX_DEV_LEDS_GPIO -+ default n -+ -+config AR71XX_MACH_TL_WA901ND_V2 -+ bool "TP-LINK TL-WA901ND v2 support" -+ select SOC_AR913X -+ select AR71XX_DEV_M25P80 -+ select AR71XX_DEV_AR9XXX_WMAC -+ select AR71XX_DEV_GPIO_BUTTONS -+ select AR71XX_DEV_LEDS_GPIO -+ default n -+ -+config AR71XX_MACH_TL_WR741ND -+ bool "TP-LINK TL-WR741ND support" -+ select SOC_AR724X -+ select AR71XX_DEV_M25P80 -+ select AR71XX_DEV_AP91_PCI if PCI -+ select AR71XX_DEV_GPIO_BUTTONS -+ select AR71XX_DEV_LEDS_GPIO -+ default n -+ -+config AR71XX_MACH_TL_WR841N_V1 -+ bool "TP-LINK TL-WR841N v1 support" -+ select SOC_AR71XX -+ select AR71XX_DEV_M25P80 -+ select AR71XX_DEV_PB42_PCI if PCI -+ select AR71XX_DEV_DSA -+ select AR71XX_DEV_GPIO_BUTTONS -+ select AR71XX_DEV_LEDS_GPIO -+ default n -+ -+config AR71XX_MACH_TL_WR941ND -+ bool "TP-LINK TL-WR941ND support" -+ select SOC_AR913X -+ select AR71XX_DEV_M25P80 -+ select AR71XX_DEV_AR9XXX_WMAC -+ select AR71XX_DEV_DSA -+ select AR71XX_DEV_GPIO_BUTTONS -+ select AR71XX_DEV_LEDS_GPIO -+ default n -+ -+config AR71XX_MACH_TL_WR1043ND -+ bool "TP-LINK TL-WR1043ND support" -+ select SOC_AR913X -+ select AR71XX_DEV_M25P80 -+ select AR71XX_DEV_AR9XXX_WMAC -+ select AR71XX_DEV_GPIO_BUTTONS -+ select AR71XX_DEV_LEDS_GPIO -+ select AR71XX_DEV_USB -+ default n -+ -+config AR71XX_MACH_TEW_632BRP -+ bool "TRENDnet TEW-632BRP support" -+ select SOC_AR913X -+ select AR71XX_DEV_M25P80 -+ select AR71XX_DEV_AR9XXX_WMAC -+ select AR71XX_DEV_GPIO_BUTTONS -+ select AR71XX_DEV_LEDS_GPIO -+ select AR71XX_NVRAM -+ default n -+ -+config AR71XX_MACH_UBNT -+ bool "Ubiquiti AR71xx based boards support" -+ select SOC_AR71XX -+ select SOC_AR724X -+ select AR71XX_DEV_M25P80 -+ select AR71XX_DEV_AP91_PCI if PCI -+ select AR71XX_DEV_GPIO_BUTTONS -+ select AR71XX_DEV_LEDS_GPIO -+ select AR71XX_DEV_PB42_PCI if PCI -+ select AR71XX_DEV_USB -+ default n -+ -+config AR71XX_MACH_EAP7660D -+ bool "Senao EAP7660D support" -+ select SOC_AR71XX -+ select AR71XX_DEV_M25P80 -+ select AR71XX_DEV_GPIO_BUTTONS -+ select AR71XX_DEV_LEDS_GPIO -+ default n -+ -+config AR71XX_MACH_ZCN_1523H -+ bool "Zcomax ZCN-1523H support" -+ select SOC_AR724X -+ select AR71XX_DEV_M25P80 -+ select AR71XX_DEV_AP91_PCI if PCI -+ select AR71XX_DEV_GPIO_BUTTONS -+ select AR71XX_DEV_LEDS_GPIO -+ default n -+ -+endmenu -+ -+config SOC_AR71XX -+ bool -+ select USB_ARCH_HAS_EHCI -+ select USB_ARCH_HAS_OHCI -+ -+config SOC_AR724X -+ bool -+ select USB_ARCH_HAS_EHCI -+ select USB_ARCH_HAS_OHCI -+ -+config SOC_AR913X -+ bool -+ select USB_ARCH_HAS_EHCI -+ -+config SOC_AR934X -+ bool -+ select USB_ARCH_HAS_EHCI -+ -+config AR71XX_DEV_M25P80 -+ def_bool n -+ -+config AR71XX_DEV_AP91_PCI -+ select AR71XX_PCI_ATH9K_FIXUP -+ def_bool n -+ -+config AR71XX_DEV_AP94_PCI -+ select AR71XX_PCI_ATH9K_FIXUP -+ def_bool n -+ -+config AR71XX_DEV_AR9XXX_WMAC -+ def_bool n -+ -+config AR71XX_DEV_DB120_PCI -+ select AR71XX_PCI_ATH9K_FIXUP -+ def_bool n -+ -+config AR71XX_DEV_DSA -+ def_bool n -+ -+config AR71XX_DEV_GPIO_BUTTONS -+ def_bool n -+ -+config AR71XX_DEV_LEDS_GPIO -+ def_bool n -+ -+config AR71XX_DEV_PB42_PCI -+ def_bool n -+ -+config AR71XX_DEV_PB9X_PCI -+ def_bool n -+ -+config AR71XX_DEV_USB -+ def_bool n -+ -+config AR71XX_NVRAM -+ def_bool n -+ -+config AR71XX_PCI_ATH9K_FIXUP -+ def_bool n -+ -+config SOC_AR933X -+ bool -+ select USB_ARCH_HAS_EHCI -+ -+endif diff -Nur linux-2.6.39.orig/arch/mips/ar71xx/mach-ap121.c linux-2.6.39/arch/mips/ar71xx/mach-ap121.c --- linux-2.6.39.orig/arch/mips/ar71xx/mach-ap121.c 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.39/arch/mips/ar71xx/mach-ap121.c 2011-08-24 02:41:55.477989660 +0200 ++++ linux-2.6.39/arch/mips/ar71xx/mach-ap121.c 2011-08-24 18:17:23.000000000 +0200 @@ -0,0 +1,245 @@ +/* + * Atheros AP121 board support @@ -3566,7 +3707,7 @@ diff -Nur linux-2.6.39.orig/arch/mips/ar71xx/mach-ap121.c linux-2.6.39/arch/mips + ap121_mini_setup); diff -Nur linux-2.6.39.orig/arch/mips/ar71xx/mach-ap81.c linux-2.6.39/arch/mips/ar71xx/mach-ap81.c --- linux-2.6.39.orig/arch/mips/ar71xx/mach-ap81.c 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.39/arch/mips/ar71xx/mach-ap81.c 2011-08-24 02:41:55.477989660 +0200 ++++ linux-2.6.39/arch/mips/ar71xx/mach-ap81.c 2011-08-24 18:17:23.000000000 +0200 @@ -0,0 +1,142 @@ +/* + * Atheros AP81 board support @@ -3712,7 +3853,7 @@ diff -Nur linux-2.6.39.orig/arch/mips/ar71xx/mach-ap81.c linux-2.6.39/arch/mips/ +MIPS_MACHINE(AR71XX_MACH_AP81, "AP81", "Atheros AP81", ap81_setup); diff -Nur linux-2.6.39.orig/arch/mips/ar71xx/mach-ap83.c linux-2.6.39/arch/mips/ar71xx/mach-ap83.c --- linux-2.6.39.orig/arch/mips/ar71xx/mach-ap83.c 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.39/arch/mips/ar71xx/mach-ap83.c 2011-08-24 02:41:55.477989660 +0200 ++++ linux-2.6.39/arch/mips/ar71xx/mach-ap83.c 2011-08-24 18:17:23.000000000 +0200 @@ -0,0 +1,267 @@ +/* + * Atheros AP83 board support @@ -3983,7 +4124,7 @@ diff -Nur linux-2.6.39.orig/arch/mips/ar71xx/mach-ap83.c linux-2.6.39/arch/mips/ +MIPS_MACHINE(AR71XX_MACH_AP83, "AP83", "Atheros AP83", ap83_setup); diff -Nur linux-2.6.39.orig/arch/mips/ar71xx/mach-ap96.c linux-2.6.39/arch/mips/ar71xx/mach-ap96.c --- linux-2.6.39.orig/arch/mips/ar71xx/mach-ap96.c 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.39/arch/mips/ar71xx/mach-ap96.c 2011-08-24 02:41:55.477989660 +0200 ++++ linux-2.6.39/arch/mips/ar71xx/mach-ap96.c 2011-08-24 18:17:23.000000000 +0200 @@ -0,0 +1,180 @@ +/* + * Atheros AP96 board support @@ -4167,7 +4308,7 @@ diff -Nur linux-2.6.39.orig/arch/mips/ar71xx/mach-ap96.c linux-2.6.39/arch/mips/ +MIPS_MACHINE(AR71XX_MACH_AP96, "AP96", "Atheros AP96", ap96_setup); diff -Nur linux-2.6.39.orig/arch/mips/ar71xx/mach-aw-nr580.c linux-2.6.39/arch/mips/ar71xx/mach-aw-nr580.c --- linux-2.6.39.orig/arch/mips/ar71xx/mach-aw-nr580.c 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.39/arch/mips/ar71xx/mach-aw-nr580.c 2011-08-24 02:41:55.487989871 +0200 ++++ linux-2.6.39/arch/mips/ar71xx/mach-aw-nr580.c 2011-08-24 18:17:23.000000000 +0200 @@ -0,0 +1,102 @@ +/* + * AzureWave AW-NR580 board support @@ -4273,7 +4414,7 @@ diff -Nur linux-2.6.39.orig/arch/mips/ar71xx/mach-aw-nr580.c linux-2.6.39/arch/m + aw_nr580_setup); diff -Nur linux-2.6.39.orig/arch/mips/ar71xx/mach-db120.c linux-2.6.39/arch/mips/ar71xx/mach-db120.c --- linux-2.6.39.orig/arch/mips/ar71xx/mach-db120.c 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.39/arch/mips/ar71xx/mach-db120.c 2011-08-24 02:41:55.487989871 +0200 ++++ linux-2.6.39/arch/mips/ar71xx/mach-db120.c 2011-08-24 18:17:23.000000000 +0200 @@ -0,0 +1,134 @@ +/* + * Atheros DB120 board (WASP SoC) support @@ -4411,7 +4552,7 @@ diff -Nur linux-2.6.39.orig/arch/mips/ar71xx/mach-db120.c linux-2.6.39/arch/mips +MIPS_MACHINE(AR71XX_MACH_DB120, "DB120", "Atheros DB120", db120_setup); diff -Nur linux-2.6.39.orig/arch/mips/ar71xx/mach-dir-600-a1.c linux-2.6.39/arch/mips/ar71xx/mach-dir-600-a1.c --- linux-2.6.39.orig/arch/mips/ar71xx/mach-dir-600-a1.c 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.39/arch/mips/ar71xx/mach-dir-600-a1.c 2011-08-24 02:41:55.487989871 +0200 ++++ linux-2.6.39/arch/mips/ar71xx/mach-dir-600-a1.c 2011-08-24 18:17:23.000000000 +0200 @@ -0,0 +1,159 @@ +/* + * D-Link DIR-600 rev. A1 board support @@ -4574,7 +4715,7 @@ diff -Nur linux-2.6.39.orig/arch/mips/ar71xx/mach-dir-600-a1.c linux-2.6.39/arch + dir_600_a1_setup); diff -Nur linux-2.6.39.orig/arch/mips/ar71xx/mach-dir-615-c1.c linux-2.6.39/arch/mips/ar71xx/mach-dir-615-c1.c --- linux-2.6.39.orig/arch/mips/ar71xx/mach-dir-615-c1.c 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.39/arch/mips/ar71xx/mach-dir-615-c1.c 2011-08-24 02:41:55.487989871 +0200 ++++ linux-2.6.39/arch/mips/ar71xx/mach-dir-615-c1.c 2011-08-24 18:17:23.000000000 +0200 @@ -0,0 +1,175 @@ +/* + * D-Link DIR-615 rev C1 board support @@ -4753,7 +4894,7 @@ diff -Nur linux-2.6.39.orig/arch/mips/ar71xx/mach-dir-615-c1.c linux-2.6.39/arch + dir_615c1_setup); diff -Nur linux-2.6.39.orig/arch/mips/ar71xx/mach-dir-825-b1.c linux-2.6.39/arch/mips/ar71xx/mach-dir-825-b1.c --- linux-2.6.39.orig/arch/mips/ar71xx/mach-dir-825-b1.c 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.39/arch/mips/ar71xx/mach-dir-825-b1.c 2011-08-24 02:41:55.487989871 +0200 ++++ linux-2.6.39/arch/mips/ar71xx/mach-dir-825-b1.c 2011-08-24 18:17:23.000000000 +0200 @@ -0,0 +1,198 @@ +/* + * D-Link DIR-825 rev. B1 board support @@ -4955,7 +5096,7 @@ diff -Nur linux-2.6.39.orig/arch/mips/ar71xx/mach-dir-825-b1.c linux-2.6.39/arch + dir825b1_setup); diff -Nur linux-2.6.39.orig/arch/mips/ar71xx/mach-eap7660d.c linux-2.6.39/arch/mips/ar71xx/mach-eap7660d.c --- linux-2.6.39.orig/arch/mips/ar71xx/mach-eap7660d.c 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.39/arch/mips/ar71xx/mach-eap7660d.c 2011-08-24 02:41:55.497990784 +0200 ++++ linux-2.6.39/arch/mips/ar71xx/mach-eap7660d.c 2011-08-24 18:17:23.000000000 +0200 @@ -0,0 +1,180 @@ +/* + * Senao EAP7660D board support @@ -5139,7 +5280,7 @@ diff -Nur linux-2.6.39.orig/arch/mips/ar71xx/mach-eap7660d.c linux-2.6.39/arch/m + eap7660d_setup); diff -Nur linux-2.6.39.orig/arch/mips/ar71xx/mach-ja76pf.c linux-2.6.39/arch/mips/ar71xx/mach-ja76pf.c --- linux-2.6.39.orig/arch/mips/ar71xx/mach-ja76pf.c 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.39/arch/mips/ar71xx/mach-ja76pf.c 2011-08-24 02:41:55.517989552 +0200 ++++ linux-2.6.39/arch/mips/ar71xx/mach-ja76pf.c 2011-08-24 18:17:23.000000000 +0200 @@ -0,0 +1,102 @@ +/* + * jjPlus JA76PF board support @@ -5245,7 +5386,7 @@ diff -Nur linux-2.6.39.orig/arch/mips/ar71xx/mach-ja76pf.c linux-2.6.39/arch/mip +MIPS_MACHINE(AR71XX_MACH_JA76PF, "JA76PF", "jjPlus JA76PF", ja76pf_init); diff -Nur linux-2.6.39.orig/arch/mips/ar71xx/mach-jwap003.c linux-2.6.39/arch/mips/ar71xx/mach-jwap003.c --- linux-2.6.39.orig/arch/mips/ar71xx/mach-jwap003.c 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.39/arch/mips/ar71xx/mach-jwap003.c 2011-08-24 02:41:55.517989552 +0200 ++++ linux-2.6.39/arch/mips/ar71xx/mach-jwap003.c 2011-08-24 18:17:23.000000000 +0200 @@ -0,0 +1,83 @@ +/* + * jjPlus JWAP003 board support @@ -5332,7 +5473,7 @@ diff -Nur linux-2.6.39.orig/arch/mips/ar71xx/mach-jwap003.c linux-2.6.39/arch/mi +MIPS_MACHINE(AR71XX_MACH_JWAP003, "JWAP003", "jjPlus JWAP003", jwap003_init); diff -Nur linux-2.6.39.orig/arch/mips/ar71xx/mach-mzk-w04nu.c linux-2.6.39/arch/mips/ar71xx/mach-mzk-w04nu.c --- linux-2.6.39.orig/arch/mips/ar71xx/mach-mzk-w04nu.c 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.39/arch/mips/ar71xx/mach-mzk-w04nu.c 2011-08-24 02:41:55.517989552 +0200 ++++ linux-2.6.39/arch/mips/ar71xx/mach-mzk-w04nu.c 2011-08-24 18:17:23.000000000 +0200 @@ -0,0 +1,166 @@ +/* + * Planex MZK-W04NU board support @@ -5502,7 +5643,7 @@ diff -Nur linux-2.6.39.orig/arch/mips/ar71xx/mach-mzk-w04nu.c linux-2.6.39/arch/ + mzk_w04nu_setup); diff -Nur linux-2.6.39.orig/arch/mips/ar71xx/mach-mzk-w300nh.c linux-2.6.39/arch/mips/ar71xx/mach-mzk-w300nh.c --- linux-2.6.39.orig/arch/mips/ar71xx/mach-mzk-w300nh.c 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.39/arch/mips/ar71xx/mach-mzk-w300nh.c 2011-08-24 02:41:55.527982711 +0200 ++++ linux-2.6.39/arch/mips/ar71xx/mach-mzk-w300nh.c 2011-08-24 18:17:23.000000000 +0200 @@ -0,0 +1,159 @@ +/* + * Planex MZK-W300NH board support @@ -5665,7 +5806,7 @@ diff -Nur linux-2.6.39.orig/arch/mips/ar71xx/mach-mzk-w300nh.c linux-2.6.39/arch + mzk_w300nh_setup); diff -Nur linux-2.6.39.orig/arch/mips/ar71xx/mach-nbg460n.c linux-2.6.39/arch/mips/ar71xx/mach-nbg460n.c --- linux-2.6.39.orig/arch/mips/ar71xx/mach-nbg460n.c 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.39/arch/mips/ar71xx/mach-nbg460n.c 2011-08-24 02:41:55.537990605 +0200 ++++ linux-2.6.39/arch/mips/ar71xx/mach-nbg460n.c 2011-08-24 18:17:23.000000000 +0200 @@ -0,0 +1,225 @@ +/* + * Zyxel NBG 460N/550N/550NH board support @@ -5894,7 +6035,7 @@ diff -Nur linux-2.6.39.orig/arch/mips/ar71xx/mach-nbg460n.c linux-2.6.39/arch/mi + nbg460n_setup); diff -Nur linux-2.6.39.orig/arch/mips/ar71xx/mach-pb42.c linux-2.6.39/arch/mips/ar71xx/mach-pb42.c --- linux-2.6.39.orig/arch/mips/ar71xx/mach-pb42.c 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.39/arch/mips/ar71xx/mach-pb42.c 2011-08-24 02:41:55.537990605 +0200 ++++ linux-2.6.39/arch/mips/ar71xx/mach-pb42.c 2011-08-24 18:17:23.000000000 +0200 @@ -0,0 +1,74 @@ +/* + * Atheros PB42 board support @@ -5972,7 +6113,7 @@ diff -Nur linux-2.6.39.orig/arch/mips/ar71xx/mach-pb42.c linux-2.6.39/arch/mips/ +MIPS_MACHINE(AR71XX_MACH_PB42, "PB42", "Atheros PB42", pb42_init); diff -Nur linux-2.6.39.orig/arch/mips/ar71xx/mach-pb44.c linux-2.6.39/arch/mips/ar71xx/mach-pb44.c --- linux-2.6.39.orig/arch/mips/ar71xx/mach-pb44.c 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.39/arch/mips/ar71xx/mach-pb44.c 2011-08-24 02:41:55.537990605 +0200 ++++ linux-2.6.39/arch/mips/ar71xx/mach-pb44.c 2011-08-24 18:17:23.000000000 +0200 @@ -0,0 +1,213 @@ +/* + * Atheros PB44 board support @@ -6189,7 +6330,7 @@ diff -Nur linux-2.6.39.orig/arch/mips/ar71xx/mach-pb44.c linux-2.6.39/arch/mips/ +MIPS_MACHINE(AR71XX_MACH_PB44, "PB44", "Atheros PB44", pb44_init); diff -Nur linux-2.6.39.orig/arch/mips/ar71xx/mach-pb92.c linux-2.6.39/arch/mips/ar71xx/mach-pb92.c --- linux-2.6.39.orig/arch/mips/ar71xx/mach-pb92.c 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.39/arch/mips/ar71xx/mach-pb92.c 2011-08-24 02:41:55.567991163 +0200 ++++ linux-2.6.39/arch/mips/ar71xx/mach-pb92.c 2011-08-24 18:17:23.000000000 +0200 @@ -0,0 +1,105 @@ +/* + * Atheros PB92 board support @@ -6298,7 +6439,7 @@ diff -Nur linux-2.6.39.orig/arch/mips/ar71xx/mach-pb92.c linux-2.6.39/arch/mips/ +MIPS_MACHINE(AR71XX_MACH_PB92, "PB92", "Atheros PB92", pb92_init); diff -Nur linux-2.6.39.orig/arch/mips/ar71xx/mach-rb4xx.c linux-2.6.39/arch/mips/ar71xx/mach-rb4xx.c --- linux-2.6.39.orig/arch/mips/ar71xx/mach-rb4xx.c 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.39/arch/mips/ar71xx/mach-rb4xx.c 2011-08-24 02:41:55.567991163 +0200 ++++ linux-2.6.39/arch/mips/ar71xx/mach-rb4xx.c 2011-08-24 18:17:23.000000000 +0200 @@ -0,0 +1,344 @@ +/* + * MikroTik RouterBOARD 4xx series support @@ -6646,7 +6787,7 @@ diff -Nur linux-2.6.39.orig/arch/mips/ar71xx/mach-rb4xx.c linux-2.6.39/arch/mips + rb493_setup); diff -Nur linux-2.6.39.orig/arch/mips/ar71xx/mach-rb750.c linux-2.6.39/arch/mips/ar71xx/mach-rb750.c --- linux-2.6.39.orig/arch/mips/ar71xx/mach-rb750.c 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.39/arch/mips/ar71xx/mach-rb750.c 2011-08-24 02:41:55.567991163 +0200 ++++ linux-2.6.39/arch/mips/ar71xx/mach-rb750.c 2011-08-24 18:17:23.000000000 +0200 @@ -0,0 +1,144 @@ +/* + * MikroTik RouterBOARD 750 support @@ -6794,7 +6935,7 @@ diff -Nur linux-2.6.39.orig/arch/mips/ar71xx/mach-rb750.c linux-2.6.39/arch/mips + rb750_setup); diff -Nur linux-2.6.39.orig/arch/mips/ar71xx/mach-tew-632brp.c linux-2.6.39/arch/mips/ar71xx/mach-tew-632brp.c --- linux-2.6.39.orig/arch/mips/ar71xx/mach-tew-632brp.c 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.39/arch/mips/ar71xx/mach-tew-632brp.c 2011-08-24 02:41:55.577989822 +0200 ++++ linux-2.6.39/arch/mips/ar71xx/mach-tew-632brp.c 2011-08-24 18:17:23.000000000 +0200 @@ -0,0 +1,151 @@ +/* + * TrendNET TEW-632BRP board support @@ -6949,7 +7090,7 @@ diff -Nur linux-2.6.39.orig/arch/mips/ar71xx/mach-tew-632brp.c linux-2.6.39/arch + tew_632brp_setup); diff -Nur linux-2.6.39.orig/arch/mips/ar71xx/mach-tl-mr3x20.c linux-2.6.39/arch/mips/ar71xx/mach-tl-mr3x20.c --- linux-2.6.39.orig/arch/mips/ar71xx/mach-tl-mr3x20.c 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.39/arch/mips/ar71xx/mach-tl-mr3x20.c 2011-08-24 02:41:55.577989822 +0200 ++++ linux-2.6.39/arch/mips/ar71xx/mach-tl-mr3x20.c 2011-08-24 18:17:23.000000000 +0200 @@ -0,0 +1,166 @@ +/* + * TP-LINK TL-MR3220/3420 board support @@ -7117,15 +7258,16 @@ diff -Nur linux-2.6.39.orig/arch/mips/ar71xx/mach-tl-mr3x20.c linux-2.6.39/arch/ + +MIPS_MACHINE(AR71XX_MACH_TL_MR3420, "TL-MR3420", "TP-LINK TL-MR3420", + tl_mr3420_setup); -diff -Nur linux-2.6.39.orig/arch/mips/ar71xx/mach-tl-wa901nd.c linux-2.6.39/arch/mips/ar71xx/mach-tl-wa901nd.c ---- linux-2.6.39.orig/arch/mips/ar71xx/mach-tl-wa901nd.c 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.39/arch/mips/ar71xx/mach-tl-wa901nd.c 2011-08-24 02:41:55.587990766 +0200 -@@ -0,0 +1,130 @@ +diff -Nur linux-2.6.39.orig/arch/mips/ar71xx/mach-tl-wa901nd-v2.c linux-2.6.39/arch/mips/ar71xx/mach-tl-wa901nd-v2.c +--- linux-2.6.39.orig/arch/mips/ar71xx/mach-tl-wa901nd-v2.c 1970-01-01 01:00:00.000000000 +0100 ++++ linux-2.6.39/arch/mips/ar71xx/mach-tl-wa901nd-v2.c 2011-08-24 18:17:23.000000000 +0200 +@@ -0,0 +1,132 @@ +/* -+ * TP-LINK TL-WA901ND board support ++ * TP-LINK TL-WA901ND v2 board support + * + * Copyright (C) 2009-2010 Gabor Juhos <juhosg@openwrt.org> + * Copyright (C) 2010 Pieter Hollants <pieter@hollants.com> ++ * Copyright (C) 2011 Jonathan Bennett <jbscience87@gmail.com> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published @@ -7140,21 +7282,23 @@ diff -Nur linux-2.6.39.orig/arch/mips/ar71xx/mach-tl-wa901nd.c linux-2.6.39/arch +#include "machtype.h" +#include "devices.h" +#include "dev-m25p80.h" -+#include "dev-ap91-pci.h" +#include "dev-gpio-buttons.h" +#include "dev-leds-gpio.h" ++#include "dev-ar9xxx-wmac.h" + -+#define TL_WA901ND_GPIO_LED_QSS 0 -+#define TL_WA901ND_GPIO_LED_SYSTEM 1 ++#define TL_WA901ND_V2_GPIO_LED_QSS 4 ++#define TL_WA901ND_V2_GPIO_LED_SYSTEM 2 ++#define TL_WA901ND_V2_GPIO_LED_WLAN 9 + -+#define TL_WA901ND_GPIO_BTN_RESET 11 -+#define TL_WA901ND_GPIO_BTN_QSS 12 + -+#define TL_WA901ND_KEYS_POLL_INTERVAL 20 /* msecs */ -+#define TL_WA901ND_KEYS_DEBOUNCE_INTERVAL (3 * TL_WA901ND_KEYS_POLL_INTERVAL) ++#define TL_WA901ND_V2_GPIO_BTN_RESET 3 ++#define TL_WA901ND_V2_GPIO_BTN_QSS 7 + ++#define TL_WA901ND_V2_KEYS_POLL_INTERVAL 20 /* msecs */ ++#define TL_WA901ND_V2_KEYS_DEBOUNCE_INTERVAL \ ++ (3 * TL_WA901ND_V2_KEYS_POLL_INTERVAL) +#ifdef CONFIG_MTD_PARTITIONS -+static struct mtd_partition tl_wa901nd_partitions[] = { ++static struct mtd_partition tl_wa901nd_v2_partitions[] = { + { + .name = "u-boot", + .offset = 0, @@ -7181,86 +7325,84 @@ diff -Nur linux-2.6.39.orig/arch/mips/ar71xx/mach-tl-wa901nd.c linux-2.6.39/arch +}; +#endif /* CONFIG_MTD_PARTITIONS */ + -+static struct flash_platform_data tl_wa901nd_flash_data = { ++static struct flash_platform_data tl_wa901nd_v2_flash_data = { +#ifdef CONFIG_MTD_PARTITIONS -+ .parts = tl_wa901nd_partitions, -+ .nr_parts = ARRAY_SIZE(tl_wa901nd_partitions), ++ .parts = tl_wa901nd_v2_partitions, ++ .nr_parts = ARRAY_SIZE(tl_wa901nd_v2_partitions), +#endif +}; + -+static struct gpio_led tl_wa901nd_leds_gpio[] __initdata = { ++static struct gpio_led tl_wa901nd_v2_leds_gpio[] __initdata = { + { -+ .name = "tl-wa901nd:green:system", -+ .gpio = TL_WA901ND_GPIO_LED_SYSTEM, ++ .name = "tl-wa901nd-v2:green:system", ++ .gpio = TL_WA901ND_V2_GPIO_LED_SYSTEM, + .active_low = 1, + }, { -+ .name = "tl-wa901nd:green:qss", -+ .gpio = TL_WA901ND_GPIO_LED_QSS, ++ .name = "tl-wa901nd-v2:green:qss", ++ .gpio = TL_WA901ND_V2_GPIO_LED_QSS, ++ }, { ++ .name = "tl-wa901nd-v2:green:wlan", ++ .gpio = TL_WA901ND_V2_GPIO_LED_WLAN, + .active_low = 1, + } +}; + -+static struct gpio_keys_button tl_wa901nd_gpio_keys[] __initdata = { ++static struct gpio_keys_button tl_wa901nd_v2_gpio_keys[] __initdata = { + { + .desc = "reset", + .type = EV_KEY, -+ .code = BTN_0, -+ .debounce_interval = TL_WA901ND_KEYS_DEBOUNCE_INTERVAL, -+ .gpio = TL_WA901ND_GPIO_BTN_RESET, ++ .code = KEY_RESTART, ++ .debounce_interval = TL_WA901ND_V2_KEYS_DEBOUNCE_INTERVAL, ++ .gpio = TL_WA901ND_V2_GPIO_BTN_RESET, + .active_low = 1, + }, { + .desc = "qss", + .type = EV_KEY, -+ .code = BTN_1, -+ .debounce_interval = TL_WA901ND_KEYS_DEBOUNCE_INTERVAL, -+ .gpio = TL_WA901ND_GPIO_BTN_QSS, ++ .code = KEY_WPS_BUTTON, ++ .debounce_interval = TL_WA901ND_V2_KEYS_DEBOUNCE_INTERVAL, ++ .gpio = TL_WA901ND_V2_GPIO_BTN_QSS, + .active_low = 1, + } +}; + -+static void __init tl_wa901nd_setup(void) ++static void __init tl_wa901nd_v2_setup(void) +{ + u8 *mac = (u8 *) KSEG1ADDR(0x1f01fc00); -+ u8 *ee = (u8 *) KSEG1ADDR(0x1fff1000); ++ u8 *eeprom = (u8 *) KSEG1ADDR(0x1fff1000); + -+ /* -+ * ar71xx_eth0 would be the WAN port, but is not connected on -+ * the TL-WA901ND. ar71xx_eth1 connects to the internal switch chip, -+ * however we have a single LAN port only. -+ */ -+ ar71xx_init_mac(ar71xx_eth1_data.mac_addr, mac, 0); -+ ar71xx_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_RMII; -+ ar71xx_eth1_data.speed = SPEED_1000; -+ ar71xx_eth1_data.duplex = DUPLEX_FULL; -+ ar71xx_eth1_data.has_ar7240_switch = 1; ++ ar71xx_init_mac(ar71xx_eth0_data.mac_addr, mac, 0); + ++ ar71xx_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_MII; ++ ar71xx_eth0_data.phy_mask = 0x00001000; + ar71xx_add_device_mdio(0x0); -+ ar71xx_add_device_eth(1); + -+ ar71xx_add_device_m25p80(&tl_wa901nd_flash_data); ++ ar71xx_eth0_data.reset_bit = RESET_MODULE_GE0_MAC | ++ RESET_MODULE_GE0_PHY; ++ ar71xx_add_device_eth(0); + -+ ar71xx_add_device_leds_gpio(-1, ARRAY_SIZE(tl_wa901nd_leds_gpio), -+ tl_wa901nd_leds_gpio); ++ ar71xx_add_device_m25p80(&tl_wa901nd_v2_flash_data); + -+ ar71xx_register_gpio_keys_polled(-1, TL_WA901ND_KEYS_POLL_INTERVAL, -+ ARRAY_SIZE(tl_wa901nd_gpio_keys), -+ tl_wa901nd_gpio_keys); ++ ar71xx_add_device_leds_gpio(-1, ARRAY_SIZE(tl_wa901nd_v2_leds_gpio), ++ tl_wa901nd_v2_leds_gpio); + -+ ap91_pci_init(ee, mac); ++ ar71xx_register_gpio_keys_polled(-1, TL_WA901ND_V2_KEYS_POLL_INTERVAL, ++ ARRAY_SIZE(tl_wa901nd_v2_gpio_keys), ++ tl_wa901nd_v2_gpio_keys); ++ ++ ar9xxx_add_device_wmac(eeprom, mac); +} + -+MIPS_MACHINE(AR71XX_MACH_TL_WA901ND, "TL-WA901ND", "TP-LINK TL-WA901ND", -+ tl_wa901nd_setup); -diff -Nur linux-2.6.39.orig/arch/mips/ar71xx/mach-tl-wa901nd-v2.c linux-2.6.39/arch/mips/ar71xx/mach-tl-wa901nd-v2.c ---- linux-2.6.39.orig/arch/mips/ar71xx/mach-tl-wa901nd-v2.c 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.39/arch/mips/ar71xx/mach-tl-wa901nd-v2.c 2011-08-24 02:41:55.587990766 +0200 -@@ -0,0 +1,132 @@ ++MIPS_MACHINE(AR71XX_MACH_TL_WA901ND_V2, "TL-WA901ND-v2", ++ "TP-LINK TL-WA901ND v2", tl_wa901nd_v2_setup); +diff -Nur linux-2.6.39.orig/arch/mips/ar71xx/mach-tl-wa901nd.c linux-2.6.39/arch/mips/ar71xx/mach-tl-wa901nd.c +--- linux-2.6.39.orig/arch/mips/ar71xx/mach-tl-wa901nd.c 1970-01-01 01:00:00.000000000 +0100 ++++ linux-2.6.39/arch/mips/ar71xx/mach-tl-wa901nd.c 2011-08-24 18:17:23.000000000 +0200 +@@ -0,0 +1,130 @@ +/* -+ * TP-LINK TL-WA901ND v2 board support ++ * TP-LINK TL-WA901ND board support + * + * Copyright (C) 2009-2010 Gabor Juhos <juhosg@openwrt.org> + * Copyright (C) 2010 Pieter Hollants <pieter@hollants.com> -+ * Copyright (C) 2011 Jonathan Bennett <jbscience87@gmail.com> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published @@ -7275,23 +7417,21 @@ diff -Nur linux-2.6.39.orig/arch/mips/ar71xx/mach-tl-wa901nd-v2.c linux-2.6.39/a +#include "machtype.h" +#include "devices.h" +#include "dev-m25p80.h" ++#include "dev-ap91-pci.h" +#include "dev-gpio-buttons.h" +#include "dev-leds-gpio.h" -+#include "dev-ar9xxx-wmac.h" + -+#define TL_WA901ND_V2_GPIO_LED_QSS 4 -+#define TL_WA901ND_V2_GPIO_LED_SYSTEM 2 -+#define TL_WA901ND_V2_GPIO_LED_WLAN 9 ++#define TL_WA901ND_GPIO_LED_QSS 0 ++#define TL_WA901ND_GPIO_LED_SYSTEM 1 + ++#define TL_WA901ND_GPIO_BTN_RESET 11 ++#define TL_WA901ND_GPIO_BTN_QSS 12 + -+#define TL_WA901ND_V2_GPIO_BTN_RESET 3 -+#define TL_WA901ND_V2_GPIO_BTN_QSS 7 ++#define TL_WA901ND_KEYS_POLL_INTERVAL 20 /* msecs */ ++#define TL_WA901ND_KEYS_DEBOUNCE_INTERVAL (3 * TL_WA901ND_KEYS_POLL_INTERVAL) + -+#define TL_WA901ND_V2_KEYS_POLL_INTERVAL 20 /* msecs */ -+#define TL_WA901ND_V2_KEYS_DEBOUNCE_INTERVAL \ -+ (3 * TL_WA901ND_V2_KEYS_POLL_INTERVAL) +#ifdef CONFIG_MTD_PARTITIONS -+static struct mtd_partition tl_wa901nd_v2_partitions[] = { ++static struct mtd_partition tl_wa901nd_partitions[] = { + { + .name = "u-boot", + .offset = 0, @@ -7318,78 +7458,79 @@ diff -Nur linux-2.6.39.orig/arch/mips/ar71xx/mach-tl-wa901nd-v2.c linux-2.6.39/a +}; +#endif /* CONFIG_MTD_PARTITIONS */ + -+static struct flash_platform_data tl_wa901nd_v2_flash_data = { ++static struct flash_platform_data tl_wa901nd_flash_data = { +#ifdef CONFIG_MTD_PARTITIONS -+ .parts = tl_wa901nd_v2_partitions, -+ .nr_parts = ARRAY_SIZE(tl_wa901nd_v2_partitions), ++ .parts = tl_wa901nd_partitions, ++ .nr_parts = ARRAY_SIZE(tl_wa901nd_partitions), +#endif +}; + -+static struct gpio_led tl_wa901nd_v2_leds_gpio[] __initdata = { ++static struct gpio_led tl_wa901nd_leds_gpio[] __initdata = { + { -+ .name = "tl-wa901nd-v2:green:system", -+ .gpio = TL_WA901ND_V2_GPIO_LED_SYSTEM, ++ .name = "tl-wa901nd:green:system", ++ .gpio = TL_WA901ND_GPIO_LED_SYSTEM, + .active_low = 1, + }, { -+ .name = "tl-wa901nd-v2:green:qss", -+ .gpio = TL_WA901ND_V2_GPIO_LED_QSS, -+ }, { -+ .name = "tl-wa901nd-v2:green:wlan", -+ .gpio = TL_WA901ND_V2_GPIO_LED_WLAN, ++ .name = "tl-wa901nd:green:qss", ++ .gpio = TL_WA901ND_GPIO_LED_QSS, + .active_low = 1, + } +}; + -+static struct gpio_keys_button tl_wa901nd_v2_gpio_keys[] __initdata = { ++static struct gpio_keys_button tl_wa901nd_gpio_keys[] __initdata = { + { + .desc = "reset", + .type = EV_KEY, -+ .code = KEY_RESTART, -+ .debounce_interval = TL_WA901ND_V2_KEYS_DEBOUNCE_INTERVAL, -+ .gpio = TL_WA901ND_V2_GPIO_BTN_RESET, ++ .code = BTN_0, ++ .debounce_interval = TL_WA901ND_KEYS_DEBOUNCE_INTERVAL, ++ .gpio = TL_WA901ND_GPIO_BTN_RESET, + .active_low = 1, + }, { + .desc = "qss", + .type = EV_KEY, -+ .code = KEY_WPS_BUTTON, -+ .debounce_interval = TL_WA901ND_V2_KEYS_DEBOUNCE_INTERVAL, -+ .gpio = TL_WA901ND_V2_GPIO_BTN_QSS, ++ .code = BTN_1, ++ .debounce_interval = TL_WA901ND_KEYS_DEBOUNCE_INTERVAL, ++ .gpio = TL_WA901ND_GPIO_BTN_QSS, + .active_low = 1, + } +}; + -+static void __init tl_wa901nd_v2_setup(void) ++static void __init tl_wa901nd_setup(void) +{ + u8 *mac = (u8 *) KSEG1ADDR(0x1f01fc00); -+ u8 *eeprom = (u8 *) KSEG1ADDR(0x1fff1000); ++ u8 *ee = (u8 *) KSEG1ADDR(0x1fff1000); + -+ ar71xx_init_mac(ar71xx_eth0_data.mac_addr, mac, 0); ++ /* ++ * ar71xx_eth0 would be the WAN port, but is not connected on ++ * the TL-WA901ND. ar71xx_eth1 connects to the internal switch chip, ++ * however we have a single LAN port only. ++ */ ++ ar71xx_init_mac(ar71xx_eth1_data.mac_addr, mac, 0); ++ ar71xx_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_RMII; ++ ar71xx_eth1_data.speed = SPEED_1000; ++ ar71xx_eth1_data.duplex = DUPLEX_FULL; ++ ar71xx_eth1_data.has_ar7240_switch = 1; + -+ ar71xx_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_MII; -+ ar71xx_eth0_data.phy_mask = 0x00001000; + ar71xx_add_device_mdio(0x0); ++ ar71xx_add_device_eth(1); + -+ ar71xx_eth0_data.reset_bit = RESET_MODULE_GE0_MAC | -+ RESET_MODULE_GE0_PHY; -+ ar71xx_add_device_eth(0); -+ -+ ar71xx_add_device_m25p80(&tl_wa901nd_v2_flash_data); ++ ar71xx_add_device_m25p80(&tl_wa901nd_flash_data); + -+ ar71xx_add_device_leds_gpio(-1, ARRAY_SIZE(tl_wa901nd_v2_leds_gpio), -+ tl_wa901nd_v2_leds_gpio); ++ ar71xx_add_device_leds_gpio(-1, ARRAY_SIZE(tl_wa901nd_leds_gpio), ++ tl_wa901nd_leds_gpio); + -+ ar71xx_register_gpio_keys_polled(-1, TL_WA901ND_V2_KEYS_POLL_INTERVAL, -+ ARRAY_SIZE(tl_wa901nd_v2_gpio_keys), -+ tl_wa901nd_v2_gpio_keys); ++ ar71xx_register_gpio_keys_polled(-1, TL_WA901ND_KEYS_POLL_INTERVAL, ++ ARRAY_SIZE(tl_wa901nd_gpio_keys), ++ tl_wa901nd_gpio_keys); + -+ ar9xxx_add_device_wmac(eeprom, mac); ++ ap91_pci_init(ee, mac); +} + -+MIPS_MACHINE(AR71XX_MACH_TL_WA901ND_V2, "TL-WA901ND-v2", -+ "TP-LINK TL-WA901ND v2", tl_wa901nd_v2_setup); ++MIPS_MACHINE(AR71XX_MACH_TL_WA901ND, "TL-WA901ND", "TP-LINK TL-WA901ND", ++ tl_wa901nd_setup); diff -Nur linux-2.6.39.orig/arch/mips/ar71xx/mach-tl-wr1043nd.c linux-2.6.39/arch/mips/ar71xx/mach-tl-wr1043nd.c --- linux-2.6.39.orig/arch/mips/ar71xx/mach-tl-wr1043nd.c 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.39/arch/mips/ar71xx/mach-tl-wr1043nd.c 2011-08-24 02:41:55.587990766 +0200 ++++ linux-2.6.39/arch/mips/ar71xx/mach-tl-wr1043nd.c 2011-08-24 18:17:23.000000000 +0200 @@ -0,0 +1,156 @@ +/* + * TP-LINK TL-WR1043ND board support @@ -7549,7 +7690,7 @@ diff -Nur linux-2.6.39.orig/arch/mips/ar71xx/mach-tl-wr1043nd.c linux-2.6.39/arc + tl_wr1043nd_setup); diff -Nur linux-2.6.39.orig/arch/mips/ar71xx/mach-tl-wr741nd.c linux-2.6.39/arch/mips/ar71xx/mach-tl-wr741nd.c --- linux-2.6.39.orig/arch/mips/ar71xx/mach-tl-wr741nd.c 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.39/arch/mips/ar71xx/mach-tl-wr741nd.c 2011-08-24 02:41:55.587990766 +0200 ++++ linux-2.6.39/arch/mips/ar71xx/mach-tl-wr741nd.c 2011-08-24 18:17:23.000000000 +0200 @@ -0,0 +1,135 @@ +/* + * TP-LINK TL-WR741ND board support @@ -7688,7 +7829,7 @@ diff -Nur linux-2.6.39.orig/arch/mips/ar71xx/mach-tl-wr741nd.c linux-2.6.39/arch + tl_wr741nd_setup); diff -Nur linux-2.6.39.orig/arch/mips/ar71xx/mach-tl-wr841n.c linux-2.6.39/arch/mips/ar71xx/mach-tl-wr841n.c --- linux-2.6.39.orig/arch/mips/ar71xx/mach-tl-wr841n.c 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.39/arch/mips/ar71xx/mach-tl-wr841n.c 2011-08-24 02:41:55.597982750 +0200 ++++ linux-2.6.39/arch/mips/ar71xx/mach-tl-wr841n.c 2011-08-24 18:17:23.000000000 +0200 @@ -0,0 +1,144 @@ +/* + * TP-LINK TL-WR841N board support @@ -7836,7 +7977,7 @@ diff -Nur linux-2.6.39.orig/arch/mips/ar71xx/mach-tl-wr841n.c linux-2.6.39/arch/ + tl_wr841n_v1_setup); diff -Nur linux-2.6.39.orig/arch/mips/ar71xx/mach-tl-wr941nd.c linux-2.6.39/arch/mips/ar71xx/mach-tl-wr941nd.c --- linux-2.6.39.orig/arch/mips/ar71xx/mach-tl-wr941nd.c 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.39/arch/mips/ar71xx/mach-tl-wr941nd.c 2011-08-24 02:41:55.597982750 +0200 ++++ linux-2.6.39/arch/mips/ar71xx/mach-tl-wr941nd.c 2011-08-24 18:17:23.000000000 +0200 @@ -0,0 +1,147 @@ +/* + * TP-LINK TL-WR941ND board support @@ -7985,88 +8126,9 @@ diff -Nur linux-2.6.39.orig/arch/mips/ar71xx/mach-tl-wr941nd.c linux-2.6.39/arch + +MIPS_MACHINE(AR71XX_MACH_TL_WR941ND, "TL-WR941ND", "TP-LINK TL-WR941ND", + tl_wr941nd_setup); -diff -Nur linux-2.6.39.orig/arch/mips/ar71xx/machtype.h linux-2.6.39/arch/mips/ar71xx/machtype.h ---- linux-2.6.39.orig/arch/mips/ar71xx/machtype.h 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.39/arch/mips/ar71xx/machtype.h 2011-08-24 02:41:55.597982750 +0200 -@@ -0,0 +1,75 @@ -+/* -+ * Atheros AR71xx machine type definitions -+ * -+ * Copyright (C) 2008-2010 Gabor Juhos <juhosg@openwrt.org> -+ * Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org> -+ * -+ * This program is free software; you can redistribute it and/or modify it -+ * under the terms of the GNU General Public License version 2 as published -+ * by the Free Software Foundation. -+ */ -+ -+#ifndef _AR71XX_MACHTYPE_H -+#define _AR71XX_MACHTYPE_H -+ -+#include <asm/mips_machine.h> -+ -+enum ar71xx_mach_type { -+ AR71XX_MACH_GENERIC = 0, -+ AR71XX_MACH_AP121, /* Atheros AP121 */ -+ AR71XX_MACH_AP121_MINI, /* Atheros AP121-MINI */ -+ AR71XX_MACH_AP81, /* Atheros AP81 */ -+ AR71XX_MACH_AP83, /* Atheros AP83 */ -+ AR71XX_MACH_AW_NR580, /* AzureWave AW-NR580 */ -+ AR71XX_MACH_DIR_600_A1, /* D-Link DIR-600 rev. A1 */ -+ AR71XX_MACH_DIR_615_C1, /* D-Link DIR-615 rev. C1 */ -+ AR71XX_MACH_DIR_825_B1, /* D-Link DIR-825 rev. B1 */ -+ AR71XX_MACH_JA76PF, /* jjPlus JA76PF */ -+ AR71XX_MACH_JWAP003, /* jjPlus JWAP003 */ -+ AR71XX_MACH_RB_411, /* MikroTik RouterBOARD 411/411A/411AH */ -+ AR71XX_MACH_RB_411U, /* MikroTik RouterBOARD 411U */ -+ AR71XX_MACH_RB_433, /* MikroTik RouterBOARD 433/433AH */ -+ AR71XX_MACH_RB_433U, /* MikroTik RouterBOARD 433UAH */ -+ AR71XX_MACH_RB_450, /* MikroTik RouterBOARD 450 */ -+ AR71XX_MACH_RB_450G, /* MikroTik RouterBOARD 450G */ -+ AR71XX_MACH_RB_493, /* Mikrotik RouterBOARD 493/493AH */ -+ AR71XX_MACH_RB_750, /* MikroTik RouterBOARD 750 */ -+ AR71XX_MACH_PB42, /* Atheros PB42 */ -+ AR71XX_MACH_PB44, /* Atheros PB44 */ -+ AR71XX_MACH_PB92, /* Atheros PB92 */ -+ AR71XX_MACH_MZK_W04NU, /* Planex MZK-W04NU */ -+ AR71XX_MACH_MZK_W300NH, /* Planex MZK-W300NH */ -+ AR71XX_MACH_NBG460N, /* Zyxel NBG460N/550N/550NH */ -+ AR71XX_MACH_TEW_632BRP, /* TRENDnet TEW-632BRP */ -+ AR71XX_MACH_TL_MR3220, /* TP-LINK TL-MR3220 */ -+ AR71XX_MACH_TL_MR3420, /* TP-LINK TL-MR3420 */ -+ AR71XX_MACH_TL_WA901ND, /* TP-LINK TL-WA901ND */ -+ AR71XX_MACH_TL_WA901ND_V2, /* TP-LINK TL-WA901ND v2 */ -+ AR71XX_MACH_TL_WR741ND, /* TP-LINK TL-WR741ND */ -+ AR71XX_MACH_TL_WR841N_V1, /* TP-LINK TL-WR841N v1 */ -+ AR71XX_MACH_TL_WR941ND, /* TP-LINK TL-WR941ND */ -+ AR71XX_MACH_TL_WR1043ND, /* TP-LINK TL-WR1041ND */ -+ AR71XX_MACH_UBNT_LSSR71, /* Ubiquiti LS-SR71 */ -+ AR71XX_MACH_UBNT_LSX, /* Ubiquiti LSX */ -+ AR71XX_MACH_UBNT_RS, /* Ubiquiti RouterStation */ -+ AR71XX_MACH_UBNT_RSPRO, /* Ubiquiti RouterStation Pro */ -+ AR71XX_MACH_UBNT_BULLET_M, /* Ubiquiti Bullet M */ -+ AR71XX_MACH_UBNT_ROCKET_M, /* Ubiquiti Rocket M */ -+ AR71XX_MACH_UBNT_NANO_M, /* Ubiquiti NanoStation M */ -+ AR71XX_MACH_WNDR3700, /* NETGEAR WNDR3700 */ -+ AR71XX_MACH_WNDR3700V2, /* NETGEAR WNDR3700v2 */ -+ AR71XX_MACH_WNR2000, /* NETGEAR WNR2000 */ -+ AR71XX_MACH_WP543, /* Compex WP543 */ -+ AR71XX_MACH_WRT160NL, /* Linksys WRT160NL */ -+ AR71XX_MACH_WRT400N, /* Linksys WRT400N */ -+ AR71XX_MACH_WZR_HP_AG300H, /* Buffalo WZR-HP-AG300H */ -+ AR71XX_MACH_WZR_HP_G300NH, /* Buffalo WZR-HP-G300NH */ -+ AR71XX_MACH_EAP7660D, /* Senao EAP7660D */ -+ AR71XX_MACH_ZCN_1523H_2, /* Zcomax ZCN-1523H-2-xx */ -+ AR71XX_MACH_ZCN_1523H_5, /* Zcomax ZCN-1523H-5-xx */ -+ AR71XX_MACH_AP96, /* Atheros AP96 */ -+ AR71XX_MACH_UBNT_UNIFI, /* Unifi */ -+ AR71XX_MACH_DB120, /* Atheros DB120 (AR934x based) */ -+}; -+ -+#endif /* _AR71XX_MACHTYPE_H */ diff -Nur linux-2.6.39.orig/arch/mips/ar71xx/mach-ubnt.c linux-2.6.39/arch/mips/ar71xx/mach-ubnt.c --- linux-2.6.39.orig/arch/mips/ar71xx/mach-ubnt.c 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.39/arch/mips/ar71xx/mach-ubnt.c 2011-08-24 02:41:55.597982750 +0200 ++++ linux-2.6.39/arch/mips/ar71xx/mach-ubnt.c 2011-08-24 18:17:23.000000000 +0200 @@ -0,0 +1,333 @@ +/* + * Ubiquiti RouterStation support @@ -8403,7 +8465,7 @@ diff -Nur linux-2.6.39.orig/arch/mips/ar71xx/mach-ubnt.c linux-2.6.39/arch/mips/ + ubnt_unifi_setup); diff -Nur linux-2.6.39.orig/arch/mips/ar71xx/mach-wndr3700.c linux-2.6.39/arch/mips/ar71xx/mach-wndr3700.c --- linux-2.6.39.orig/arch/mips/ar71xx/mach-wndr3700.c 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.39/arch/mips/ar71xx/mach-wndr3700.c 2011-08-24 02:41:55.607980283 +0200 ++++ linux-2.6.39/arch/mips/ar71xx/mach-wndr3700.c 2011-08-24 18:17:23.000000000 +0200 @@ -0,0 +1,290 @@ +/* + * Netgear WNDR3700 board support @@ -8697,7 +8759,7 @@ diff -Nur linux-2.6.39.orig/arch/mips/ar71xx/mach-wndr3700.c linux-2.6.39/arch/m + wndr3700v2_setup); diff -Nur linux-2.6.39.orig/arch/mips/ar71xx/mach-wnr2000.c linux-2.6.39/arch/mips/ar71xx/mach-wnr2000.c --- linux-2.6.39.orig/arch/mips/ar71xx/mach-wnr2000.c 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.39/arch/mips/ar71xx/mach-wnr2000.c 2011-08-24 02:41:55.617990333 +0200 ++++ linux-2.6.39/arch/mips/ar71xx/mach-wnr2000.c 2011-08-24 18:17:23.000000000 +0200 @@ -0,0 +1,150 @@ +/* + * NETGEAR WNR2000 board support @@ -8851,7 +8913,7 @@ diff -Nur linux-2.6.39.orig/arch/mips/ar71xx/mach-wnr2000.c linux-2.6.39/arch/mi +MIPS_MACHINE(AR71XX_MACH_WNR2000, "WNR2000", "NETGEAR WNR2000", wnr2000_setup); diff -Nur linux-2.6.39.orig/arch/mips/ar71xx/mach-wp543.c linux-2.6.39/arch/mips/ar71xx/mach-wp543.c --- linux-2.6.39.orig/arch/mips/ar71xx/mach-wp543.c 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.39/arch/mips/ar71xx/mach-wp543.c 2011-08-24 02:41:55.617990333 +0200 ++++ linux-2.6.39/arch/mips/ar71xx/mach-wp543.c 2011-08-24 18:17:23.000000000 +0200 @@ -0,0 +1,101 @@ +/* + * Compex WP543/WPJ543 board support @@ -8956,7 +9018,7 @@ diff -Nur linux-2.6.39.orig/arch/mips/ar71xx/mach-wp543.c linux-2.6.39/arch/mips +MIPS_MACHINE(AR71XX_MACH_WP543, "WP543", "Compex WP543", wp543_setup); diff -Nur linux-2.6.39.orig/arch/mips/ar71xx/mach-wrt160nl.c linux-2.6.39/arch/mips/ar71xx/mach-wrt160nl.c --- linux-2.6.39.orig/arch/mips/ar71xx/mach-wrt160nl.c 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.39/arch/mips/ar71xx/mach-wrt160nl.c 2011-08-24 02:41:55.617990333 +0200 ++++ linux-2.6.39/arch/mips/ar71xx/mach-wrt160nl.c 2011-08-24 18:17:23.000000000 +0200 @@ -0,0 +1,161 @@ +/* + * Linksys WRT160NL board support @@ -9121,7 +9183,7 @@ diff -Nur linux-2.6.39.orig/arch/mips/ar71xx/mach-wrt160nl.c linux-2.6.39/arch/m + wrt160nl_setup); diff -Nur linux-2.6.39.orig/arch/mips/ar71xx/mach-wrt400n.c linux-2.6.39/arch/mips/ar71xx/mach-wrt400n.c --- linux-2.6.39.orig/arch/mips/ar71xx/mach-wrt400n.c 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.39/arch/mips/ar71xx/mach-wrt400n.c 2011-08-24 02:41:55.617990333 +0200 ++++ linux-2.6.39/arch/mips/ar71xx/mach-wrt400n.c 2011-08-24 18:17:23.000000000 +0200 @@ -0,0 +1,164 @@ +/* + * Linksys WRT400N board support @@ -9289,7 +9351,7 @@ diff -Nur linux-2.6.39.orig/arch/mips/ar71xx/mach-wrt400n.c linux-2.6.39/arch/mi +MIPS_MACHINE(AR71XX_MACH_WRT400N, "WRT400N", "Linksys WRT400N", wrt400n_setup); diff -Nur linux-2.6.39.orig/arch/mips/ar71xx/mach-wzr-hp-ag300h.c linux-2.6.39/arch/mips/ar71xx/mach-wzr-hp-ag300h.c --- linux-2.6.39.orig/arch/mips/ar71xx/mach-wzr-hp-ag300h.c 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.39/arch/mips/ar71xx/mach-wzr-hp-ag300h.c 2011-08-24 02:41:55.628193451 +0200 ++++ linux-2.6.39/arch/mips/ar71xx/mach-wzr-hp-ag300h.c 2011-08-24 18:17:23.000000000 +0200 @@ -0,0 +1,231 @@ +/* + * Buffalo WZR-HP-AG300H board support @@ -9524,7 +9586,7 @@ diff -Nur linux-2.6.39.orig/arch/mips/ar71xx/mach-wzr-hp-ag300h.c linux-2.6.39/a + diff -Nur linux-2.6.39.orig/arch/mips/ar71xx/mach-wzr-hp-g300nh.c linux-2.6.39/arch/mips/ar71xx/mach-wzr-hp-g300nh.c --- linux-2.6.39.orig/arch/mips/ar71xx/mach-wzr-hp-g300nh.c 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.39/arch/mips/ar71xx/mach-wzr-hp-g300nh.c 2011-08-24 02:41:55.649418561 +0200 ++++ linux-2.6.39/arch/mips/ar71xx/mach-wzr-hp-g300nh.c 2011-08-24 18:17:23.000000000 +0200 @@ -0,0 +1,292 @@ +/* + * Buffalo WZR-HP-G300NH board support @@ -9820,7 +9882,7 @@ diff -Nur linux-2.6.39.orig/arch/mips/ar71xx/mach-wzr-hp-g300nh.c linux-2.6.39/a + "Buffalo WZR-HP-G300NH", wzrhpg300nh_setup); diff -Nur linux-2.6.39.orig/arch/mips/ar71xx/mach-zcn-1523h.c linux-2.6.39/arch/mips/ar71xx/mach-zcn-1523h.c --- linux-2.6.39.orig/arch/mips/ar71xx/mach-zcn-1523h.c 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.39/arch/mips/ar71xx/mach-zcn-1523h.c 2011-08-24 02:41:55.649418561 +0200 ++++ linux-2.6.39/arch/mips/ar71xx/mach-zcn-1523h.c 2011-08-24 18:17:23.000000000 +0200 @@ -0,0 +1,214 @@ +/* + * Zcomax ZCN-1523H-2-8/5-16 board support @@ -10036,80 +10098,88 @@ diff -Nur linux-2.6.39.orig/arch/mips/ar71xx/mach-zcn-1523h.c linux-2.6.39/arch/ + +MIPS_MACHINE(AR71XX_MACH_ZCN_1523H_5, "ZCN-1523H-5", "Zcomax ZCN-1523H-5", + zcn_1523h_5_setup); -diff -Nur linux-2.6.39.orig/arch/mips/ar71xx/Makefile linux-2.6.39/arch/mips/ar71xx/Makefile ---- linux-2.6.39.orig/arch/mips/ar71xx/Makefile 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.39/arch/mips/ar71xx/Makefile 2011-08-24 02:41:55.677990354 +0200 -@@ -0,0 +1,67 @@ -+# -+# Makefile for the Atheros AR71xx SoC specific parts of the kernel -+# -+# Copyright (C) 2008-2009 Gabor Juhos <juhosg@openwrt.org> -+# Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org> -+# -+# This program is free software; you can redistribute it and/or modify it -+# under the terms of the GNU General Public License version 2 as published -+# by the Free Software Foundation. -+ -+obj-y := prom.o irq.o setup.o devices.o gpio.o ar71xx.o +diff -Nur linux-2.6.39.orig/arch/mips/ar71xx/machtype.h linux-2.6.39/arch/mips/ar71xx/machtype.h +--- linux-2.6.39.orig/arch/mips/ar71xx/machtype.h 1970-01-01 01:00:00.000000000 +0100 ++++ linux-2.6.39/arch/mips/ar71xx/machtype.h 2011-08-24 18:17:23.000000000 +0200 +@@ -0,0 +1,75 @@ ++/* ++ * Atheros AR71xx machine type definitions ++ * ++ * Copyright (C) 2008-2010 Gabor Juhos <juhosg@openwrt.org> ++ * Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org> ++ * ++ * This program is free software; you can redistribute it and/or modify it ++ * under the terms of the GNU General Public License version 2 as published ++ * by the Free Software Foundation. ++ */ + -+obj-$(CONFIG_EARLY_PRINTK) += early_printk.o -+obj-$(CONFIG_PCI) += pci.o ++#ifndef _AR71XX_MACHTYPE_H ++#define _AR71XX_MACHTYPE_H + -+obj-$(CONFIG_AR71XX_DEV_AP91_PCI) += dev-ap91-pci.o -+obj-$(CONFIG_AR71XX_DEV_AP94_PCI) += dev-ap94-pci.o -+obj-$(CONFIG_AR71XX_DEV_AR9XXX_WMAC) += dev-ar9xxx-wmac.o -+obj-$(CONFIG_AR71XX_DEV_DB120_PCI) += dev-db120-pci.o -+obj-$(CONFIG_AR71XX_DEV_DSA) += dev-dsa.o -+obj-$(CONFIG_AR71XX_DEV_GPIO_BUTTONS) += dev-gpio-buttons.o -+obj-$(CONFIG_AR71XX_DEV_LEDS_GPIO) += dev-leds-gpio.o -+obj-$(CONFIG_AR71XX_DEV_M25P80) += dev-m25p80.o -+obj-$(CONFIG_AR71XX_DEV_PB42_PCI) += dev-pb42-pci.o -+obj-$(CONFIG_AR71XX_DEV_PB9X_PCI) += dev-pb9x-pci.o -+obj-$(CONFIG_AR71XX_DEV_USB) += dev-usb.o ++#include <asm/mips_machine.h> + -+obj-$(CONFIG_AR71XX_NVRAM) += nvram.o -+obj-$(CONFIG_AR71XX_PCI_ATH9K_FIXUP) += pci-ath9k-fixup.o ++enum ar71xx_mach_type { ++ AR71XX_MACH_GENERIC = 0, ++ AR71XX_MACH_AP121, /* Atheros AP121 */ ++ AR71XX_MACH_AP121_MINI, /* Atheros AP121-MINI */ ++ AR71XX_MACH_AP81, /* Atheros AP81 */ ++ AR71XX_MACH_AP83, /* Atheros AP83 */ ++ AR71XX_MACH_AW_NR580, /* AzureWave AW-NR580 */ ++ AR71XX_MACH_DIR_600_A1, /* D-Link DIR-600 rev. A1 */ ++ AR71XX_MACH_DIR_615_C1, /* D-Link DIR-615 rev. C1 */ ++ AR71XX_MACH_DIR_825_B1, /* D-Link DIR-825 rev. B1 */ ++ AR71XX_MACH_JA76PF, /* jjPlus JA76PF */ ++ AR71XX_MACH_JWAP003, /* jjPlus JWAP003 */ ++ AR71XX_MACH_RB_411, /* MikroTik RouterBOARD 411/411A/411AH */ ++ AR71XX_MACH_RB_411U, /* MikroTik RouterBOARD 411U */ ++ AR71XX_MACH_RB_433, /* MikroTik RouterBOARD 433/433AH */ ++ AR71XX_MACH_RB_433U, /* MikroTik RouterBOARD 433UAH */ ++ AR71XX_MACH_RB_450, /* MikroTik RouterBOARD 450 */ ++ AR71XX_MACH_RB_450G, /* MikroTik RouterBOARD 450G */ ++ AR71XX_MACH_RB_493, /* Mikrotik RouterBOARD 493/493AH */ ++ AR71XX_MACH_RB_750, /* MikroTik RouterBOARD 750 */ ++ AR71XX_MACH_PB42, /* Atheros PB42 */ ++ AR71XX_MACH_PB44, /* Atheros PB44 */ ++ AR71XX_MACH_PB92, /* Atheros PB92 */ ++ AR71XX_MACH_MZK_W04NU, /* Planex MZK-W04NU */ ++ AR71XX_MACH_MZK_W300NH, /* Planex MZK-W300NH */ ++ AR71XX_MACH_NBG460N, /* Zyxel NBG460N/550N/550NH */ ++ AR71XX_MACH_TEW_632BRP, /* TRENDnet TEW-632BRP */ ++ AR71XX_MACH_TL_MR3220, /* TP-LINK TL-MR3220 */ ++ AR71XX_MACH_TL_MR3420, /* TP-LINK TL-MR3420 */ ++ AR71XX_MACH_TL_WA901ND, /* TP-LINK TL-WA901ND */ ++ AR71XX_MACH_TL_WA901ND_V2, /* TP-LINK TL-WA901ND v2 */ ++ AR71XX_MACH_TL_WR741ND, /* TP-LINK TL-WR741ND */ ++ AR71XX_MACH_TL_WR841N_V1, /* TP-LINK TL-WR841N v1 */ ++ AR71XX_MACH_TL_WR941ND, /* TP-LINK TL-WR941ND */ ++ AR71XX_MACH_TL_WR1043ND, /* TP-LINK TL-WR1041ND */ ++ AR71XX_MACH_UBNT_LSSR71, /* Ubiquiti LS-SR71 */ ++ AR71XX_MACH_UBNT_LSX, /* Ubiquiti LSX */ ++ AR71XX_MACH_UBNT_RS, /* Ubiquiti RouterStation */ ++ AR71XX_MACH_UBNT_RSPRO, /* Ubiquiti RouterStation Pro */ ++ AR71XX_MACH_UBNT_BULLET_M, /* Ubiquiti Bullet M */ ++ AR71XX_MACH_UBNT_ROCKET_M, /* Ubiquiti Rocket M */ ++ AR71XX_MACH_UBNT_NANO_M, /* Ubiquiti NanoStation M */ ++ AR71XX_MACH_WNDR3700, /* NETGEAR WNDR3700 */ ++ AR71XX_MACH_WNDR3700V2, /* NETGEAR WNDR3700v2 */ ++ AR71XX_MACH_WNR2000, /* NETGEAR WNR2000 */ ++ AR71XX_MACH_WP543, /* Compex WP543 */ ++ AR71XX_MACH_WRT160NL, /* Linksys WRT160NL */ ++ AR71XX_MACH_WRT400N, /* Linksys WRT400N */ ++ AR71XX_MACH_WZR_HP_AG300H, /* Buffalo WZR-HP-AG300H */ ++ AR71XX_MACH_WZR_HP_G300NH, /* Buffalo WZR-HP-G300NH */ ++ AR71XX_MACH_EAP7660D, /* Senao EAP7660D */ ++ AR71XX_MACH_ZCN_1523H_2, /* Zcomax ZCN-1523H-2-xx */ ++ AR71XX_MACH_ZCN_1523H_5, /* Zcomax ZCN-1523H-5-xx */ ++ AR71XX_MACH_AP96, /* Atheros AP96 */ ++ AR71XX_MACH_UBNT_UNIFI, /* Unifi */ ++ AR71XX_MACH_DB120, /* Atheros DB120 (AR934x based) */ ++}; + -+obj-$(CONFIG_AR71XX_MACH_AP121) += mach-ap121.o -+obj-$(CONFIG_AR71XX_MACH_AP81) += mach-ap81.o -+obj-$(CONFIG_AR71XX_MACH_AP83) += mach-ap83.o -+obj-$(CONFIG_AR71XX_MACH_AP96) += mach-ap96.o -+obj-$(CONFIG_AR71XX_MACH_AW_NR580) += mach-aw-nr580.o -+obj-$(CONFIG_AR71XX_MACH_DB120) += mach-db120.o -+obj-$(CONFIG_AR71XX_MACH_DIR_600_A1) += mach-dir-600-a1.o -+obj-$(CONFIG_AR71XX_MACH_DIR_615_C1) += mach-dir-615-c1.o -+obj-$(CONFIG_AR71XX_MACH_DIR_825_B1) += mach-dir-825-b1.o -+obj-$(CONFIG_AR71XX_MACH_EAP7660D) += mach-eap7660d.o -+obj-$(CONFIG_AR71XX_MACH_JA76PF) += mach-ja76pf.o -+obj-$(CONFIG_AR71XX_MACH_JWAP003) += mach-jwap003.o -+obj-$(CONFIG_AR71XX_MACH_MZK_W04NU) += mach-mzk-w04nu.o -+obj-$(CONFIG_AR71XX_MACH_MZK_W300NH) += mach-mzk-w300nh.o -+obj-$(CONFIG_AR71XX_MACH_NBG460N) += mach-nbg460n.o -+obj-$(CONFIG_AR71XX_MACH_PB42) += mach-pb42.o -+obj-$(CONFIG_AR71XX_MACH_PB44) += mach-pb44.o -+obj-$(CONFIG_AR71XX_MACH_PB92) += mach-pb92.o -+obj-$(CONFIG_AR71XX_MACH_RB4XX) += mach-rb4xx.o -+obj-$(CONFIG_AR71XX_MACH_RB750) += mach-rb750.o -+obj-$(CONFIG_AR71XX_MACH_TEW_632BRP) += mach-tew-632brp.o -+obj-$(CONFIG_AR71XX_MACH_TL_MR3X20) += mach-tl-mr3x20.o -+obj-$(CONFIG_AR71XX_MACH_TL_WA901ND) += mach-tl-wa901nd.o -+obj-$(CONFIG_AR71XX_MACH_TL_WA901ND_V2) += mach-tl-wa901nd-v2.o -+obj-$(CONFIG_AR71XX_MACH_TL_WR741ND) += mach-tl-wr741nd.o -+obj-$(CONFIG_AR71XX_MACH_TL_WR841N_V1) += mach-tl-wr841n.o -+obj-$(CONFIG_AR71XX_MACH_TL_WR941ND) += mach-tl-wr941nd.o -+obj-$(CONFIG_AR71XX_MACH_TL_WR1043ND) += mach-tl-wr1043nd.o -+obj-$(CONFIG_AR71XX_MACH_UBNT) += mach-ubnt.o -+obj-$(CONFIG_AR71XX_MACH_WNDR3700) += mach-wndr3700.o -+obj-$(CONFIG_AR71XX_MACH_WNR2000) += mach-wnr2000.o -+obj-$(CONFIG_AR71XX_MACH_WP543) += mach-wp543.o -+obj-$(CONFIG_AR71XX_MACH_WRT160NL) += mach-wrt160nl.o -+obj-$(CONFIG_AR71XX_MACH_WRT400N) += mach-wrt400n.o -+obj-$(CONFIG_AR71XX_MACH_WZR_HP_G300NH) += mach-wzr-hp-g300nh.o -+obj-$(CONFIG_AR71XX_MACH_WZR_HP_AG300H) += mach-wzr-hp-ag300h.o -+obj-$(CONFIG_AR71XX_MACH_ZCN_1523H) += mach-zcn-1523h.o ++#endif /* _AR71XX_MACHTYPE_H */ diff -Nur linux-2.6.39.orig/arch/mips/ar71xx/nvram.c linux-2.6.39/arch/mips/ar71xx/nvram.c --- linux-2.6.39.orig/arch/mips/ar71xx/nvram.c 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.39/arch/mips/ar71xx/nvram.c 2011-08-24 02:41:55.677990354 +0200 ++++ linux-2.6.39/arch/mips/ar71xx/nvram.c 2011-08-24 18:17:23.000000000 +0200 @@ -0,0 +1,75 @@ +/* + * Atheros AR71xx minimal nvram support @@ -10188,7 +10258,7 @@ diff -Nur linux-2.6.39.orig/arch/mips/ar71xx/nvram.c linux-2.6.39/arch/mips/ar71 +} diff -Nur linux-2.6.39.orig/arch/mips/ar71xx/nvram.h linux-2.6.39/arch/mips/ar71xx/nvram.h --- linux-2.6.39.orig/arch/mips/ar71xx/nvram.h 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.39/arch/mips/ar71xx/nvram.h 2011-08-24 02:41:55.687991145 +0200 ++++ linux-2.6.39/arch/mips/ar71xx/nvram.h 2011-08-24 18:17:23.000000000 +0200 @@ -0,0 +1,19 @@ +/* + * Atheros AR71xx minimal nvram support @@ -10211,7 +10281,7 @@ diff -Nur linux-2.6.39.orig/arch/mips/ar71xx/nvram.h linux-2.6.39/arch/mips/ar71 +#endif /* _AR71XX_NVRAM_H */ diff -Nur linux-2.6.39.orig/arch/mips/ar71xx/pci-ath9k-fixup.c linux-2.6.39/arch/mips/ar71xx/pci-ath9k-fixup.c --- linux-2.6.39.orig/arch/mips/ar71xx/pci-ath9k-fixup.c 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.39/arch/mips/ar71xx/pci-ath9k-fixup.c 2011-08-24 02:41:55.697990606 +0200 ++++ linux-2.6.39/arch/mips/ar71xx/pci-ath9k-fixup.c 2011-08-24 18:17:23.000000000 +0200 @@ -0,0 +1,123 @@ +/* + * Atheros AP94 reference board PCI initialization @@ -10338,7 +10408,7 @@ diff -Nur linux-2.6.39.orig/arch/mips/ar71xx/pci-ath9k-fixup.c linux-2.6.39/arch +} diff -Nur linux-2.6.39.orig/arch/mips/ar71xx/pci-ath9k-fixup.h linux-2.6.39/arch/mips/ar71xx/pci-ath9k-fixup.h --- linux-2.6.39.orig/arch/mips/ar71xx/pci-ath9k-fixup.h 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.39/arch/mips/ar71xx/pci-ath9k-fixup.h 2011-08-24 02:41:55.697990606 +0200 ++++ linux-2.6.39/arch/mips/ar71xx/pci-ath9k-fixup.h 2011-08-24 18:17:23.000000000 +0200 @@ -0,0 +1,6 @@ +#ifndef _PCI_ATH9K_FIXUP +#define _PCI_ATH9K_FIXUP @@ -10348,7 +10418,7 @@ diff -Nur linux-2.6.39.orig/arch/mips/ar71xx/pci-ath9k-fixup.h linux-2.6.39/arch +#endif /* _PCI_ATH9K_FIXUP */ diff -Nur linux-2.6.39.orig/arch/mips/ar71xx/pci.c linux-2.6.39/arch/mips/ar71xx/pci.c --- linux-2.6.39.orig/arch/mips/ar71xx/pci.c 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.39/arch/mips/ar71xx/pci.c 2011-08-24 02:41:55.697990606 +0200 ++++ linux-2.6.39/arch/mips/ar71xx/pci.c 2011-08-24 18:17:23.000000000 +0200 @@ -0,0 +1,97 @@ +/* + * Atheros AR71xx PCI setup code @@ -10449,7 +10519,7 @@ diff -Nur linux-2.6.39.orig/arch/mips/ar71xx/pci.c linux-2.6.39/arch/mips/ar71xx +} diff -Nur linux-2.6.39.orig/arch/mips/ar71xx/prom.c linux-2.6.39/arch/mips/ar71xx/prom.c --- linux-2.6.39.orig/arch/mips/ar71xx/prom.c 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.39/arch/mips/ar71xx/prom.c 2011-08-24 02:41:55.737990425 +0200 ++++ linux-2.6.39/arch/mips/ar71xx/prom.c 2011-08-24 18:17:23.000000000 +0200 @@ -0,0 +1,189 @@ +/* + * Atheros AR71xx SoC specific prom routines @@ -10642,7 +10712,7 @@ diff -Nur linux-2.6.39.orig/arch/mips/ar71xx/prom.c linux-2.6.39/arch/mips/ar71x +} diff -Nur linux-2.6.39.orig/arch/mips/ar71xx/setup.c linux-2.6.39/arch/mips/ar71xx/setup.c --- linux-2.6.39.orig/arch/mips/ar71xx/setup.c 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.39/arch/mips/ar71xx/setup.c 2011-08-24 02:41:55.737990425 +0200 ++++ linux-2.6.39/arch/mips/ar71xx/setup.c 2011-08-24 18:17:23.000000000 +0200 @@ -0,0 +1,446 @@ +/* + * Atheros AR71xx SoC specific setup @@ -11092,7 +11162,7 @@ diff -Nur linux-2.6.39.orig/arch/mips/ar71xx/setup.c linux-2.6.39/arch/mips/ar71 + ar71xx_generic_init); diff -Nur linux-2.6.39.orig/arch/mips/include/asm/checksum.h linux-2.6.39/arch/mips/include/asm/checksum.h --- linux-2.6.39.orig/arch/mips/include/asm/checksum.h 2011-05-19 06:06:34.000000000 +0200 -+++ linux-2.6.39/arch/mips/include/asm/checksum.h 2011-08-24 05:53:21.109231561 +0200 ++++ linux-2.6.39/arch/mips/include/asm/checksum.h 2011-08-24 18:17:23.000000000 +0200 @@ -12,6 +12,7 @@ #define _ASM_CHECKSUM_H @@ -11145,7 +11215,7 @@ diff -Nur linux-2.6.39.orig/arch/mips/include/asm/checksum.h linux-2.6.39/arch/m return csum_fold(csum); diff -Nur linux-2.6.39.orig/arch/mips/include/asm/fw/myloader/myloader.h linux-2.6.39/arch/mips/include/asm/fw/myloader/myloader.h --- linux-2.6.39.orig/arch/mips/include/asm/fw/myloader/myloader.h 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.39/arch/mips/include/asm/fw/myloader/myloader.h 2011-04-27 12:19:21.887662064 +0200 ++++ linux-2.6.39/arch/mips/include/asm/fw/myloader/myloader.h 2011-08-24 18:17:23.000000000 +0200 @@ -0,0 +1,34 @@ +/* + * Compex's MyLoader specific definitions @@ -11183,7 +11253,7 @@ diff -Nur linux-2.6.39.orig/arch/mips/include/asm/fw/myloader/myloader.h linux-2 +#endif /* _ASM_MIPS_FW_MYLOADER_H */ diff -Nur linux-2.6.39.orig/arch/mips/include/asm/mach-ar71xx/ar71xx.h linux-2.6.39/arch/mips/include/asm/mach-ar71xx/ar71xx.h --- linux-2.6.39.orig/arch/mips/include/asm/mach-ar71xx/ar71xx.h 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.39/arch/mips/include/asm/mach-ar71xx/ar71xx.h 2011-08-06 09:32:36.758018150 +0200 ++++ linux-2.6.39/arch/mips/include/asm/mach-ar71xx/ar71xx.h 2011-08-24 18:17:23.000000000 +0200 @@ -0,0 +1,769 @@ +/* + * Atheros AR71xx SoC specific definitions @@ -11956,7 +12026,7 @@ diff -Nur linux-2.6.39.orig/arch/mips/include/asm/mach-ar71xx/ar71xx.h linux-2.6 +#endif /* __ASM_MACH_AR71XX_H */ diff -Nur linux-2.6.39.orig/arch/mips/include/asm/mach-ar71xx/ar91xx_flash.h linux-2.6.39/arch/mips/include/asm/mach-ar71xx/ar91xx_flash.h --- linux-2.6.39.orig/arch/mips/include/asm/mach-ar71xx/ar91xx_flash.h 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.39/arch/mips/include/asm/mach-ar71xx/ar91xx_flash.h 2011-04-27 12:19:21.867661560 +0200 ++++ linux-2.6.39/arch/mips/include/asm/mach-ar71xx/ar91xx_flash.h 2011-08-24 18:17:23.000000000 +0200 @@ -0,0 +1,26 @@ +/* + * AR91xx parallel flash driver platform data definitions @@ -11986,7 +12056,7 @@ diff -Nur linux-2.6.39.orig/arch/mips/include/asm/mach-ar71xx/ar91xx_flash.h lin +#endif /* __AR91XX_FLASH_H */ diff -Nur linux-2.6.39.orig/arch/mips/include/asm/mach-ar71xx/ar933x_uart.h linux-2.6.39/arch/mips/include/asm/mach-ar71xx/ar933x_uart.h --- linux-2.6.39.orig/arch/mips/include/asm/mach-ar71xx/ar933x_uart.h 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.39/arch/mips/include/asm/mach-ar71xx/ar933x_uart.h 2011-08-06 09:32:36.758018150 +0200 ++++ linux-2.6.39/arch/mips/include/asm/mach-ar71xx/ar933x_uart.h 2011-08-24 18:17:23.000000000 +0200 @@ -0,0 +1,67 @@ +/* + * Atheros AR933X UART defines @@ -12057,7 +12127,7 @@ diff -Nur linux-2.6.39.orig/arch/mips/include/asm/mach-ar71xx/ar933x_uart.h linu +#endif /* __AR933X_UART_H */ diff -Nur linux-2.6.39.orig/arch/mips/include/asm/mach-ar71xx/ar933x_uart_platform.h linux-2.6.39/arch/mips/include/asm/mach-ar71xx/ar933x_uart_platform.h --- linux-2.6.39.orig/arch/mips/include/asm/mach-ar71xx/ar933x_uart_platform.h 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.39/arch/mips/include/asm/mach-ar71xx/ar933x_uart_platform.h 2011-08-06 09:32:36.758018150 +0200 ++++ linux-2.6.39/arch/mips/include/asm/mach-ar71xx/ar933x_uart_platform.h 2011-08-24 18:17:23.000000000 +0200 @@ -0,0 +1,18 @@ +/* + * Platform data definition for Atheros AR933X UART @@ -12079,7 +12149,7 @@ diff -Nur linux-2.6.39.orig/arch/mips/include/asm/mach-ar71xx/ar933x_uart_platfo +#endif /* _AR933X_UART_PLATFORM_H */ diff -Nur linux-2.6.39.orig/arch/mips/include/asm/mach-ar71xx/cpu-feature-overrides.h linux-2.6.39/arch/mips/include/asm/mach-ar71xx/cpu-feature-overrides.h --- linux-2.6.39.orig/arch/mips/include/asm/mach-ar71xx/cpu-feature-overrides.h 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.39/arch/mips/include/asm/mach-ar71xx/cpu-feature-overrides.h 2011-04-27 12:19:21.877661867 +0200 ++++ linux-2.6.39/arch/mips/include/asm/mach-ar71xx/cpu-feature-overrides.h 2011-08-24 18:17:23.000000000 +0200 @@ -0,0 +1,56 @@ +/* + * Atheros AR71xx specific CPU feature overrides @@ -12139,7 +12209,7 @@ diff -Nur linux-2.6.39.orig/arch/mips/include/asm/mach-ar71xx/cpu-feature-overri +#endif /* __ASM_MACH_AR71XX_CPU_FEATURE_OVERRIDES_H */ diff -Nur linux-2.6.39.orig/arch/mips/include/asm/mach-ar71xx/gpio.h linux-2.6.39/arch/mips/include/asm/mach-ar71xx/gpio.h --- linux-2.6.39.orig/arch/mips/include/asm/mach-ar71xx/gpio.h 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.39/arch/mips/include/asm/mach-ar71xx/gpio.h 2011-04-27 12:19:21.877661867 +0200 ++++ linux-2.6.39/arch/mips/include/asm/mach-ar71xx/gpio.h 2011-08-24 18:17:23.000000000 +0200 @@ -0,0 +1,53 @@ +/* + * Atheros AR71xx GPIO API definitions @@ -12196,7 +12266,7 @@ diff -Nur linux-2.6.39.orig/arch/mips/include/asm/mach-ar71xx/gpio.h linux-2.6.3 +#endif /* __ASM_MACH_AR71XX_GPIO_H */ diff -Nur linux-2.6.39.orig/arch/mips/include/asm/mach-ar71xx/irq.h linux-2.6.39/arch/mips/include/asm/mach-ar71xx/irq.h --- linux-2.6.39.orig/arch/mips/include/asm/mach-ar71xx/irq.h 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.39/arch/mips/include/asm/mach-ar71xx/irq.h 2011-04-27 12:19:21.877661867 +0200 ++++ linux-2.6.39/arch/mips/include/asm/mach-ar71xx/irq.h 2011-08-24 18:17:23.000000000 +0200 @@ -0,0 +1,17 @@ +/* + * Copyright (C) 2008-2009 Gabor Juhos <juhosg@openwrt.org> @@ -12217,7 +12287,7 @@ diff -Nur linux-2.6.39.orig/arch/mips/include/asm/mach-ar71xx/irq.h linux-2.6.39 +#endif /* __ASM_MACH_AR71XX_IRQ_H */ diff -Nur linux-2.6.39.orig/arch/mips/include/asm/mach-ar71xx/kernel-entry-init.h linux-2.6.39/arch/mips/include/asm/mach-ar71xx/kernel-entry-init.h --- linux-2.6.39.orig/arch/mips/include/asm/mach-ar71xx/kernel-entry-init.h 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.39/arch/mips/include/asm/mach-ar71xx/kernel-entry-init.h 2011-04-27 12:19:21.877661867 +0200 ++++ linux-2.6.39/arch/mips/include/asm/mach-ar71xx/kernel-entry-init.h 2011-08-24 18:17:23.000000000 +0200 @@ -0,0 +1,32 @@ +/* + * Atheros AR71xx specific kernel entry setup @@ -12253,7 +12323,7 @@ diff -Nur linux-2.6.39.orig/arch/mips/include/asm/mach-ar71xx/kernel-entry-init. +#endif /* __ASM_MACH_AR71XX_KERNEL_ENTRY_H */ diff -Nur linux-2.6.39.orig/arch/mips/include/asm/mach-ar71xx/mach-rb750.h linux-2.6.39/arch/mips/include/asm/mach-ar71xx/mach-rb750.h --- linux-2.6.39.orig/arch/mips/include/asm/mach-ar71xx/mach-rb750.h 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.39/arch/mips/include/asm/mach-ar71xx/mach-rb750.h 2011-04-27 12:19:21.877661867 +0200 ++++ linux-2.6.39/arch/mips/include/asm/mach-ar71xx/mach-rb750.h 2011-08-24 18:17:23.000000000 +0200 @@ -0,0 +1,66 @@ +/* + * MikroTik RouterBOARD 750 definitions @@ -12324,7 +12394,7 @@ diff -Nur linux-2.6.39.orig/arch/mips/include/asm/mach-ar71xx/mach-rb750.h linux \ No newline at end of file diff -Nur linux-2.6.39.orig/arch/mips/include/asm/mach-ar71xx/mangle-port.h linux-2.6.39/arch/mips/include/asm/mach-ar71xx/mangle-port.h --- linux-2.6.39.orig/arch/mips/include/asm/mach-ar71xx/mangle-port.h 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.39/arch/mips/include/asm/mach-ar71xx/mangle-port.h 2011-04-27 12:19:21.877661867 +0200 ++++ linux-2.6.39/arch/mips/include/asm/mach-ar71xx/mangle-port.h 2011-08-24 18:17:23.000000000 +0200 @@ -0,0 +1,45 @@ +/* + * Copyright (C) 2008 Gabor Juhos <juhosg@openwrt.org> @@ -12373,7 +12443,7 @@ diff -Nur linux-2.6.39.orig/arch/mips/include/asm/mach-ar71xx/mangle-port.h linu +#endif /* __ASM_MACH_AR71XX_MANGLE_PORT_H */ diff -Nur linux-2.6.39.orig/arch/mips/include/asm/mach-ar71xx/pci.h linux-2.6.39/arch/mips/include/asm/mach-ar71xx/pci.h --- linux-2.6.39.orig/arch/mips/include/asm/mach-ar71xx/pci.h 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.39/arch/mips/include/asm/mach-ar71xx/pci.h 2011-04-27 12:19:21.877661867 +0200 ++++ linux-2.6.39/arch/mips/include/asm/mach-ar71xx/pci.h 2011-08-24 18:17:23.000000000 +0200 @@ -0,0 +1,46 @@ +/* + * Atheros AR71xx SoC specific PCI definitions @@ -12423,7 +12493,7 @@ diff -Nur linux-2.6.39.orig/arch/mips/include/asm/mach-ar71xx/pci.h linux-2.6.39 +#endif /* __ASM_MACH_AR71XX_PCI_H */ diff -Nur linux-2.6.39.orig/arch/mips/include/asm/mach-ar71xx/platform.h linux-2.6.39/arch/mips/include/asm/mach-ar71xx/platform.h --- linux-2.6.39.orig/arch/mips/include/asm/mach-ar71xx/platform.h 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.39/arch/mips/include/asm/mach-ar71xx/platform.h 2011-08-22 07:40:11.890481646 +0200 ++++ linux-2.6.39/arch/mips/include/asm/mach-ar71xx/platform.h 2011-08-24 18:17:23.000000000 +0200 @@ -0,0 +1,63 @@ +/* + * Atheros AR71xx SoC specific platform data definitions @@ -12490,7 +12560,7 @@ diff -Nur linux-2.6.39.orig/arch/mips/include/asm/mach-ar71xx/platform.h linux-2 +#endif /* __ASM_MACH_AR71XX_PLATFORM_H */ diff -Nur linux-2.6.39.orig/arch/mips/include/asm/mach-ar71xx/rb4xx_cpld.h linux-2.6.39/arch/mips/include/asm/mach-ar71xx/rb4xx_cpld.h --- linux-2.6.39.orig/arch/mips/include/asm/mach-ar71xx/rb4xx_cpld.h 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.39/arch/mips/include/asm/mach-ar71xx/rb4xx_cpld.h 2011-04-27 12:19:21.867661560 +0200 ++++ linux-2.6.39/arch/mips/include/asm/mach-ar71xx/rb4xx_cpld.h 2011-08-24 18:17:24.000000000 +0200 @@ -0,0 +1,48 @@ +/* + * SPI driver definitions for the CPLD chip on the Mikrotik RB4xx boards @@ -12542,7 +12612,7 @@ diff -Nur linux-2.6.39.orig/arch/mips/include/asm/mach-ar71xx/rb4xx_cpld.h linux +extern int rb4xx_cpld_write(const unsigned char *buf, unsigned count); diff -Nur linux-2.6.39.orig/arch/mips/include/asm/mach-ar71xx/war.h linux-2.6.39/arch/mips/include/asm/mach-ar71xx/war.h --- linux-2.6.39.orig/arch/mips/include/asm/mach-ar71xx/war.h 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.39/arch/mips/include/asm/mach-ar71xx/war.h 2011-04-27 12:19:21.867661560 +0200 ++++ linux-2.6.39/arch/mips/include/asm/mach-ar71xx/war.h 2011-08-24 18:17:24.000000000 +0200 @@ -0,0 +1,25 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public @@ -12571,7 +12641,7 @@ diff -Nur linux-2.6.39.orig/arch/mips/include/asm/mach-ar71xx/war.h linux-2.6.39 +#endif /* __ASM_MACH_AR71XX_WAR_H */ diff -Nur linux-2.6.39.orig/arch/mips/include/asm/time.h linux-2.6.39/arch/mips/include/asm/time.h --- linux-2.6.39.orig/arch/mips/include/asm/time.h 2011-05-19 06:06:34.000000000 +0200 -+++ linux-2.6.39/arch/mips/include/asm/time.h 2011-08-24 05:53:05.239228886 +0200 ++++ linux-2.6.39/arch/mips/include/asm/time.h 2011-08-24 18:17:24.000000000 +0200 @@ -52,6 +52,7 @@ */ #ifdef CONFIG_CEVT_R4K_LIB @@ -12580,2530 +12650,9 @@ diff -Nur linux-2.6.39.orig/arch/mips/include/asm/time.h linux-2.6.39/arch/mips/ extern int r4k_clockevent_init(void); #endif -diff -Nur linux-2.6.39.orig/arch/mips/Kconfig linux-2.6.39/arch/mips/Kconfig ---- linux-2.6.39.orig/arch/mips/Kconfig 2011-05-19 06:06:34.000000000 +0200 -+++ linux-2.6.39/arch/mips/Kconfig 2011-08-24 02:42:39.969240338 +0200 -@@ -84,6 +84,23 @@ - help - Support for the Atheros AR71XX/AR724X/AR913X SoCs. - -+config ATHEROS_AR71XX -+ bool "Atheros AR71xx based boards" -+ select CEVT_R4K -+ select CSRC_R4K -+ select DMA_NONCOHERENT -+ select HW_HAS_PCI -+ select IRQ_CPU -+ select ARCH_REQUIRE_GPIOLIB -+ select SYS_HAS_CPU_MIPS32_R1 -+ select SYS_HAS_CPU_MIPS32_R2 -+ select SYS_SUPPORTS_32BIT_KERNEL -+ select SYS_SUPPORTS_BIG_ENDIAN -+ select SYS_HAS_EARLY_PRINTK -+ select MIPS_MACHINE -+ help -+ Support for Atheros AR71xx based boards. -+ - config BCM47XX - bool "Broadcom BCM47XX based boards" - select CEVT_R4K -@@ -739,6 +756,7 @@ - endchoice - - source "arch/mips/alchemy/Kconfig" -+source "arch/mips/ar71xx/Kconfig" - source "arch/mips/ath79/Kconfig" - source "arch/mips/bcm63xx/Kconfig" - source "arch/mips/jazz/Kconfig" -@@ -907,6 +925,9 @@ - config MIPS_DISABLE_OBSOLETE_IDE - bool - -+config MYLOADER -+ bool -+ - config SYNC_R4K - bool - -diff -Nur linux-2.6.39.orig/arch/mips/Kconfig.orig linux-2.6.39/arch/mips/Kconfig.orig ---- linux-2.6.39.orig/arch/mips/Kconfig.orig 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.39/arch/mips/Kconfig.orig 2011-08-22 16:21:32.077979816 +0200 -@@ -0,0 +1,2472 @@ -+config MIPS -+ bool -+ default y -+ select HAVE_GENERIC_DMA_COHERENT -+ select HAVE_IDE -+ select HAVE_OPROFILE -+ select HAVE_IRQ_WORK -+ select HAVE_PERF_EVENTS -+ select PERF_USE_VMALLOC -+ select HAVE_ARCH_KGDB -+ select HAVE_FUNCTION_TRACER -+ select HAVE_FUNCTION_TRACE_MCOUNT_TEST -+ select HAVE_DYNAMIC_FTRACE -+ select HAVE_FTRACE_MCOUNT_RECORD -+ select HAVE_C_RECORDMCOUNT -+ select HAVE_FUNCTION_GRAPH_TRACER -+ select HAVE_KPROBES -+ select HAVE_KRETPROBES -+ select RTC_LIB if !MACH_LOONGSON -+ select GENERIC_ATOMIC64 if !64BIT -+ select HAVE_DMA_ATTRS -+ select HAVE_DMA_API_DEBUG -+ select HAVE_GENERIC_HARDIRQS -+ select GENERIC_IRQ_PROBE -+ select GENERIC_IRQ_SHOW -+ select HAVE_ARCH_JUMP_LABEL -+ -+menu "Machine selection" -+ -+config ZONE_DMA -+ bool -+ -+choice -+ prompt "System type" -+ default SGI_IP22 -+ -+config MIPS_ALCHEMY -+ bool "Alchemy processor based machines" -+ select 64BIT_PHYS_ADDR -+ select CEVT_R4K_LIB -+ select CSRC_R4K_LIB -+ select IRQ_CPU -+ select SYS_HAS_CPU_MIPS32_R1 -+ select SYS_SUPPORTS_32BIT_KERNEL -+ select SYS_SUPPORTS_APM_EMULATION -+ select GENERIC_GPIO -+ select ARCH_WANT_OPTIONAL_GPIOLIB -+ select SYS_SUPPORTS_ZBOOT -+ -+config AR7 -+ bool "Texas Instruments AR7" -+ select BOOT_ELF32 -+ select DMA_NONCOHERENT -+ select CEVT_R4K -+ select CSRC_R4K -+ select IRQ_CPU -+ select NO_EXCEPT_FILL -+ select SWAP_IO_SPACE -+ select SYS_HAS_CPU_MIPS32_R1 -+ select SYS_HAS_EARLY_PRINTK -+ select SYS_SUPPORTS_32BIT_KERNEL -+ select SYS_SUPPORTS_LITTLE_ENDIAN -+ select SYS_SUPPORTS_ZBOOT_UART16550 -+ select ARCH_REQUIRE_GPIOLIB -+ select GCD -+ select VLYNQ -+ help -+ Support for the Texas Instruments AR7 System-on-a-Chip -+ family: TNETD7100, 7200 and 7300. -+ -+config ATH79 -+ bool "Atheros AR71XX/AR724X/AR913X based boards" -+ select ARCH_REQUIRE_GPIOLIB -+ select BOOT_RAW -+ select CEVT_R4K -+ select CSRC_R4K -+ select DMA_NONCOHERENT -+ select IRQ_CPU -+ select MIPS_MACHINE -+ select SYS_HAS_CPU_MIPS32_R2 -+ select SYS_HAS_EARLY_PRINTK -+ select SYS_SUPPORTS_32BIT_KERNEL -+ select SYS_SUPPORTS_BIG_ENDIAN -+ help -+ Support for the Atheros AR71XX/AR724X/AR913X SoCs. -+ -+config ATHEROS_AR71XX -+ bool "Atheros AR71xx based boards" -+ select CEVT_R4K -+ select CSRC_R4K -+ select DMA_NONCOHERENT -+ select HW_HAS_PCI -+ select IRQ_CPU -+ select ARCH_REQUIRE_GPIOLIB -+ select SYS_HAS_CPU_MIPS32_R1 -+ select SYS_HAS_CPU_MIPS32_R2 -+ select SYS_SUPPORTS_32BIT_KERNEL -+ select SYS_SUPPORTS_BIG_ENDIAN -+ select SYS_HAS_EARLY_PRINTK -+ select MIPS_MACHINE -+ help -+ Support for Atheros AR71xx based boards. -+ -+config BCM47XX -+ bool "Broadcom BCM47XX based boards" -+ select CEVT_R4K -+ select CSRC_R4K -+ select DMA_NONCOHERENT -+ select HW_HAS_PCI -+ select IRQ_CPU -+ select SYS_HAS_CPU_MIPS32_R1 -+ select SYS_SUPPORTS_32BIT_KERNEL -+ select SYS_SUPPORTS_LITTLE_ENDIAN -+ select SSB -+ select SSB_DRIVER_MIPS -+ select SSB_DRIVER_EXTIF -+ select SSB_EMBEDDED -+ select SSB_B43_PCI_BRIDGE if PCI -+ select SSB_PCICORE_HOSTMODE if PCI -+ select GENERIC_GPIO -+ select SYS_HAS_EARLY_PRINTK -+ select CFE -+ help -+ Support for BCM47XX based boards -+ -+config BCM63XX -+ bool "Broadcom BCM63XX based boards" -+ select CEVT_R4K -+ select CSRC_R4K -+ select DMA_NONCOHERENT -+ select IRQ_CPU -+ select SYS_HAS_CPU_MIPS32_R1 -+ select SYS_SUPPORTS_32BIT_KERNEL -+ select SYS_SUPPORTS_BIG_ENDIAN -+ select SYS_HAS_EARLY_PRINTK -+ select SWAP_IO_SPACE -+ select ARCH_REQUIRE_GPIOLIB -+ help -+ Support for BCM63XX based boards -+ -+config MIPS_COBALT -+ bool "Cobalt Server" -+ select CEVT_R4K -+ select CSRC_R4K -+ select CEVT_GT641XX -+ select DMA_NONCOHERENT -+ select HW_HAS_PCI -+ select I8253 -+ select I8259 -+ select IRQ_CPU -+ select IRQ_GT641XX -+ select PCI_GT64XXX_PCI0 -+ select PCI -+ select SYS_HAS_CPU_NEVADA -+ select SYS_HAS_EARLY_PRINTK -+ select SYS_SUPPORTS_32BIT_KERNEL -+ select SYS_SUPPORTS_64BIT_KERNEL -+ select SYS_SUPPORTS_LITTLE_ENDIAN -+ -+config MACH_DECSTATION -+ bool "DECstations" -+ select BOOT_ELF32 -+ select CEVT_DS1287 -+ select CEVT_R4K -+ select CSRC_IOASIC -+ select CSRC_R4K -+ select CPU_DADDI_WORKAROUNDS if 64BIT -+ select CPU_R4000_WORKAROUNDS if 64BIT -+ select CPU_R4400_WORKAROUNDS if 64BIT -+ select DMA_NONCOHERENT -+ select NO_IOPORT -+ select IRQ_CPU -+ select SYS_HAS_CPU_R3000 -+ select SYS_HAS_CPU_R4X00 -+ select SYS_SUPPORTS_32BIT_KERNEL -+ select SYS_SUPPORTS_64BIT_KERNEL if EXPERIMENTAL -+ select SYS_SUPPORTS_LITTLE_ENDIAN -+ select SYS_SUPPORTS_128HZ -+ select SYS_SUPPORTS_256HZ -+ select SYS_SUPPORTS_1024HZ -+ help -+ This enables support for DEC's MIPS based workstations. For details -+ see the Linux/MIPS FAQ on <http://www.linux-mips.org/> and the -+ DECstation porting pages on <http://decstation.unix-ag.org/>. -+ -+ If you have one of the following DECstation Models you definitely -+ want to choose R4xx0 for the CPU Type: -+ -+ DECstation 5000/50 -+ DECstation 5000/150 -+ DECstation 5000/260 -+ DECsystem 5900/260 -+ -+ otherwise choose R3000. -+ -+config MACH_JAZZ -+ bool "Jazz family of machines" -+ select ARC -+ select ARC32 -+ select ARCH_MAY_HAVE_PC_FDC -+ select CEVT_R4K -+ select CSRC_R4K -+ select DEFAULT_SGI_PARTITION if CPU_BIG_ENDIAN -+ select GENERIC_ISA_DMA -+ select IRQ_CPU -+ select I8253 -+ select I8259 -+ select ISA -+ select SYS_HAS_CPU_R4X00 -+ select SYS_SUPPORTS_32BIT_KERNEL -+ select SYS_SUPPORTS_64BIT_KERNEL if EXPERIMENTAL -+ select SYS_SUPPORTS_100HZ -+ help -+ This a family of machines based on the MIPS R4030 chipset which was -+ used by several vendors to build RISC/os and Windows NT workstations. -+ Members include the Acer PICA, MIPS Magnum 4000, MIPS Millennium and -+ Olivetti M700-10 workstations. -+ -+config MACH_JZ4740 -+ bool "Ingenic JZ4740 based machines" -+ select SYS_HAS_CPU_MIPS32_R1 -+ select SYS_SUPPORTS_32BIT_KERNEL -+ select SYS_SUPPORTS_LITTLE_ENDIAN -+ select DMA_NONCOHERENT -+ select IRQ_CPU -+ select GENERIC_GPIO -+ select ARCH_REQUIRE_GPIOLIB -+ select SYS_HAS_EARLY_PRINTK -+ select HAVE_PWM -+ select HAVE_CLK -+ -+config LASAT -+ bool "LASAT Networks platforms" -+ select CEVT_R4K -+ select CSRC_R4K -+ select DMA_NONCOHERENT -+ select SYS_HAS_EARLY_PRINTK -+ select HW_HAS_PCI -+ select IRQ_CPU -+ select PCI_GT64XXX_PCI0 -+ select MIPS_NILE4 -+ select R5000_CPU_SCACHE -+ select SYS_HAS_CPU_R5000 -+ select SYS_SUPPORTS_32BIT_KERNEL -+ select SYS_SUPPORTS_64BIT_KERNEL if BROKEN -+ select SYS_SUPPORTS_LITTLE_ENDIAN -+ -+config MACH_LOONGSON -+ bool "Loongson family of machines" -+ select SYS_SUPPORTS_ZBOOT -+ help -+ This enables the support of Loongson family of machines. -+ -+ Loongson is a family of general-purpose MIPS-compatible CPUs. -+ developed at Institute of Computing Technology (ICT), -+ Chinese Academy of Sciences (CAS) in the People's Republic -+ of China. The chief architect is Professor Weiwu Hu. -+ -+config MIPS_MALTA -+ bool "MIPS Malta board" -+ select ARCH_MAY_HAVE_PC_FDC -+ select BOOT_ELF32 -+ select BOOT_RAW -+ select CEVT_R4K -+ select CSRC_R4K -+ select DMA_NONCOHERENT -+ select GENERIC_ISA_DMA -+ select IRQ_CPU -+ select IRQ_GIC -+ select HW_HAS_PCI -+ select I8253 -+ select I8259 -+ select MIPS_BOARDS_GEN -+ select MIPS_BONITO64 -+ select MIPS_CPU_SCACHE -+ select PCI_GT64XXX_PCI0 -+ select MIPS_MSC -+ select SWAP_IO_SPACE -+ select SYS_HAS_CPU_MIPS32_R1 -+ select SYS_HAS_CPU_MIPS32_R2 -+ select SYS_HAS_CPU_MIPS64_R1 -+ select SYS_HAS_CPU_NEVADA -+ select SYS_HAS_CPU_RM7000 -+ select SYS_HAS_EARLY_PRINTK -+ select SYS_SUPPORTS_32BIT_KERNEL -+ select SYS_SUPPORTS_64BIT_KERNEL -+ select SYS_SUPPORTS_BIG_ENDIAN -+ select SYS_SUPPORTS_LITTLE_ENDIAN -+ select SYS_SUPPORTS_MIPS_CMP -+ select SYS_SUPPORTS_MULTITHREADING -+ select SYS_SUPPORTS_SMARTMIPS -+ select SYS_SUPPORTS_ZBOOT -+ help -+ This enables support for the MIPS Technologies Malta evaluation -+ board. -+ -+config MIPS_SIM -+ bool 'MIPS simulator (MIPSsim)' -+ select CEVT_R4K -+ select CSRC_R4K -+ select DMA_NONCOHERENT -+ select SYS_HAS_EARLY_PRINTK -+ select IRQ_CPU -+ select BOOT_RAW -+ select SYS_HAS_CPU_MIPS32_R1 -+ select SYS_HAS_CPU_MIPS32_R2 -+ select SYS_HAS_EARLY_PRINTK -+ select SYS_SUPPORTS_32BIT_KERNEL -+ select SYS_SUPPORTS_BIG_ENDIAN -+ select SYS_SUPPORTS_MULTITHREADING -+ select SYS_SUPPORTS_LITTLE_ENDIAN -+ help -+ This option enables support for MIPS Technologies MIPSsim software -+ emulator. -+ -+config NEC_MARKEINS -+ bool "NEC EMMA2RH Mark-eins board" -+ select SOC_EMMA2RH -+ select HW_HAS_PCI -+ help -+ This enables support for the NEC Electronics Mark-eins boards. -+ -+config MACH_VR41XX -+ bool "NEC VR4100 series based machines" -+ select CEVT_R4K -+ select CSRC_R4K -+ select SYS_HAS_CPU_VR41XX -+ select ARCH_REQUIRE_GPIOLIB -+ -+config NXP_STB220 -+ bool "NXP STB220 board" -+ select SOC_PNX833X -+ help -+ Support for NXP Semiconductors STB220 Development Board. -+ -+config NXP_STB225 -+ bool "NXP 225 board" -+ select SOC_PNX833X -+ select SOC_PNX8335 -+ help -+ Support for NXP Semiconductors STB225 Development Board. -+ -+config PNX8550_JBS -+ bool "NXP PNX8550 based JBS board" -+ select PNX8550 -+ select SYS_SUPPORTS_LITTLE_ENDIAN -+ -+config PNX8550_STB810 -+ bool "NXP PNX8550 based STB810 board" -+ select PNX8550 -+ select SYS_SUPPORTS_LITTLE_ENDIAN -+ -+config PMC_MSP -+ bool "PMC-Sierra MSP chipsets" -+ depends on EXPERIMENTAL -+ select CEVT_R4K -+ select CSRC_R4K -+ select DMA_NONCOHERENT -+ select SWAP_IO_SPACE -+ select NO_EXCEPT_FILL -+ select BOOT_RAW -+ select SYS_HAS_CPU_MIPS32_R1 -+ select SYS_HAS_CPU_MIPS32_R2 -+ select SYS_SUPPORTS_32BIT_KERNEL -+ select SYS_SUPPORTS_BIG_ENDIAN -+ select IRQ_CPU -+ select SERIAL_8250 -+ select SERIAL_8250_CONSOLE -+ help -+ This adds support for the PMC-Sierra family of Multi-Service -+ Processor System-On-A-Chips. These parts include a number -+ of integrated peripherals, interfaces and DSPs in addition to -+ a variety of MIPS cores. -+ -+config PMC_YOSEMITE -+ bool "PMC-Sierra Yosemite eval board" -+ select CEVT_R4K -+ select CSRC_R4K -+ select DMA_COHERENT -+ select HW_HAS_PCI -+ select IRQ_CPU -+ select IRQ_CPU_RM7K -+ select IRQ_CPU_RM9K -+ select SWAP_IO_SPACE -+ select SYS_HAS_CPU_RM9000 -+ select SYS_HAS_EARLY_PRINTK -+ select SYS_SUPPORTS_32BIT_KERNEL -+ select SYS_SUPPORTS_64BIT_KERNEL -+ select SYS_SUPPORTS_BIG_ENDIAN -+ select SYS_SUPPORTS_HIGHMEM -+ select SYS_SUPPORTS_SMP -+ help -+ Yosemite is an evaluation board for the RM9000x2 processor -+ manufactured by PMC-Sierra. -+ -+config POWERTV -+ bool "Cisco PowerTV" -+ select BOOT_ELF32 -+ select CEVT_R4K -+ select CPU_MIPSR2_IRQ_VI -+ select CPU_MIPSR2_IRQ_EI -+ select CSRC_POWERTV -+ select DMA_NONCOHERENT -+ select HW_HAS_PCI -+ select SYS_HAS_EARLY_PRINTK -+ select SYS_HAS_CPU_MIPS32_R2 -+ select SYS_SUPPORTS_32BIT_KERNEL -+ select SYS_SUPPORTS_BIG_ENDIAN -+ select SYS_SUPPORTS_HIGHMEM -+ select USB_OHCI_LITTLE_ENDIAN -+ help -+ This enables support for the Cisco PowerTV Platform. -+ -+config SGI_IP22 -+ bool "SGI IP22 (Indy/Indigo2)" -+ select ARC -+ select ARC32 -+ select BOOT_ELF32 -+ select CEVT_R4K -+ select CSRC_R4K -+ select DEFAULT_SGI_PARTITION -+ select DMA_NONCOHERENT -+ select HW_HAS_EISA -+ select I8253 -+ select I8259 -+ select IP22_CPU_SCACHE -+ select IRQ_CPU -+ select GENERIC_ISA_DMA_SUPPORT_BROKEN -+ select SGI_HAS_I8042 -+ select SGI_HAS_INDYDOG -+ select SGI_HAS_HAL2 -+ select SGI_HAS_SEEQ -+ select SGI_HAS_WD93 -+ select SGI_HAS_ZILOG -+ select SWAP_IO_SPACE -+ select SYS_HAS_CPU_R4X00 -+ select SYS_HAS_CPU_R5000 -+ # -+ # Disable EARLY_PRINTK for now since it leads to overwritten prom -+ # memory during early boot on some machines. -+ # -+ # See http://www.linux-mips.org/cgi-bin/mesg.cgi?a=linux-mips&i=20091119164009.GA15038%40deprecation.cyrius.com -+ # for a more details discussion -+ # -+ # select SYS_HAS_EARLY_PRINTK -+ select SYS_SUPPORTS_32BIT_KERNEL -+ select SYS_SUPPORTS_64BIT_KERNEL -+ select SYS_SUPPORTS_BIG_ENDIAN -+ help -+ This are the SGI Indy, Challenge S and Indigo2, as well as certain -+ OEM variants like the Tandem CMN B006S. To compile a Linux kernel -+ that runs on these, say Y here. -+ -+config SGI_IP27 -+ bool "SGI IP27 (Origin200/2000)" -+ select ARC -+ select ARC64 -+ select BOOT_ELF64 -+ select DEFAULT_SGI_PARTITION -+ select DMA_COHERENT -+ select SYS_HAS_EARLY_PRINTK -+ select HW_HAS_PCI -+ select NR_CPUS_DEFAULT_64 -+ select SYS_HAS_CPU_R10000 -+ select SYS_SUPPORTS_64BIT_KERNEL -+ select SYS_SUPPORTS_BIG_ENDIAN -+ select SYS_SUPPORTS_NUMA -+ select SYS_SUPPORTS_SMP -+ help -+ This are the SGI Origin 200, Origin 2000 and Onyx 2 Graphics -+ workstations. To compile a Linux kernel that runs on these, say Y -+ here. -+ -+config SGI_IP28 -+ bool "SGI IP28 (Indigo2 R10k) (EXPERIMENTAL)" -+ depends on EXPERIMENTAL -+ select ARC -+ select ARC64 -+ select BOOT_ELF64 -+ select CEVT_R4K -+ select CSRC_R4K -+ select DEFAULT_SGI_PARTITION -+ select DMA_NONCOHERENT -+ select GENERIC_ISA_DMA_SUPPORT_BROKEN -+ select IRQ_CPU -+ select HW_HAS_EISA -+ select I8253 -+ select I8259 -+ select SGI_HAS_I8042 -+ select SGI_HAS_INDYDOG -+ select SGI_HAS_HAL2 -+ select SGI_HAS_SEEQ -+ select SGI_HAS_WD93 -+ select SGI_HAS_ZILOG -+ select SWAP_IO_SPACE -+ select SYS_HAS_CPU_R10000 -+ # -+ # Disable EARLY_PRINTK for now since it leads to overwritten prom -+ # memory during early boot on some machines. -+ # -+ # See http://www.linux-mips.org/cgi-bin/mesg.cgi?a=linux-mips&i=20091119164009.GA15038%40deprecation.cyrius.com -+ # for a more details discussion -+ # -+ # select SYS_HAS_EARLY_PRINTK -+ select SYS_SUPPORTS_64BIT_KERNEL -+ select SYS_SUPPORTS_BIG_ENDIAN -+ help -+ This is the SGI Indigo2 with R10000 processor. To compile a Linux -+ kernel that runs on these, say Y here. -+ -+config SGI_IP32 -+ bool "SGI IP32 (O2)" -+ select ARC -+ select ARC32 -+ select BOOT_ELF32 -+ select CEVT_R4K -+ select CSRC_R4K -+ select DMA_NONCOHERENT -+ select HW_HAS_PCI -+ select IRQ_CPU -+ select R5000_CPU_SCACHE -+ select RM7000_CPU_SCACHE -+ select SYS_HAS_CPU_R5000 -+ select SYS_HAS_CPU_R10000 if BROKEN -+ select SYS_HAS_CPU_RM7000 -+ select SYS_HAS_CPU_NEVADA -+ select SYS_SUPPORTS_64BIT_KERNEL -+ select SYS_SUPPORTS_BIG_ENDIAN -+ help -+ If you want this kernel to run on SGI O2 workstation, say Y here. -+ -+config SIBYTE_CRHINE -+ bool "Sibyte BCM91120C-CRhine" -+ depends on EXPERIMENTAL -+ select BOOT_ELF32 -+ select DMA_COHERENT -+ select SIBYTE_BCM1120 -+ select SWAP_IO_SPACE -+ select SYS_HAS_CPU_SB1 -+ select SYS_SUPPORTS_BIG_ENDIAN -+ select SYS_SUPPORTS_LITTLE_ENDIAN -+ -+config SIBYTE_CARMEL -+ bool "Sibyte BCM91120x-Carmel" -+ depends on EXPERIMENTAL -+ select BOOT_ELF32 -+ select DMA_COHERENT -+ select SIBYTE_BCM1120 -+ select SWAP_IO_SPACE -+ select SYS_HAS_CPU_SB1 -+ select SYS_SUPPORTS_BIG_ENDIAN -+ select SYS_SUPPORTS_LITTLE_ENDIAN -+ -+config SIBYTE_CRHONE -+ bool "Sibyte BCM91125C-CRhone" -+ depends on EXPERIMENTAL -+ select BOOT_ELF32 -+ select DMA_COHERENT -+ select SIBYTE_BCM1125 -+ select SWAP_IO_SPACE -+ select SYS_HAS_CPU_SB1 -+ select SYS_SUPPORTS_BIG_ENDIAN -+ select SYS_SUPPORTS_HIGHMEM -+ select SYS_SUPPORTS_LITTLE_ENDIAN -+ -+config SIBYTE_RHONE -+ bool "Sibyte BCM91125E-Rhone" -+ depends on EXPERIMENTAL -+ select BOOT_ELF32 -+ select DMA_COHERENT -+ select SIBYTE_BCM1125H -+ select SWAP_IO_SPACE -+ select SYS_HAS_CPU_SB1 -+ select SYS_SUPPORTS_BIG_ENDIAN -+ select SYS_SUPPORTS_LITTLE_ENDIAN -+ -+config SIBYTE_SWARM -+ bool "Sibyte BCM91250A-SWARM" -+ select BOOT_ELF32 -+ select DMA_COHERENT -+ select HAVE_PATA_PLATFORM -+ select NR_CPUS_DEFAULT_2 -+ select SIBYTE_SB1250 -+ select SWAP_IO_SPACE -+ select SYS_HAS_CPU_SB1 -+ select SYS_SUPPORTS_BIG_ENDIAN -+ select SYS_SUPPORTS_HIGHMEM -+ select SYS_SUPPORTS_LITTLE_ENDIAN -+ select ZONE_DMA32 if 64BIT -+ -+config SIBYTE_LITTLESUR -+ bool "Sibyte BCM91250C2-LittleSur" -+ depends on EXPERIMENTAL -+ select BOOT_ELF32 -+ select DMA_COHERENT -+ select HAVE_PATA_PLATFORM -+ select NR_CPUS_DEFAULT_2 -+ select SIBYTE_SB1250 -+ select SWAP_IO_SPACE -+ select SYS_HAS_CPU_SB1 -+ select SYS_SUPPORTS_BIG_ENDIAN -+ select SYS_SUPPORTS_HIGHMEM -+ select SYS_SUPPORTS_LITTLE_ENDIAN -+ -+config SIBYTE_SENTOSA -+ bool "Sibyte BCM91250E-Sentosa" -+ depends on EXPERIMENTAL -+ select BOOT_ELF32 -+ select DMA_COHERENT -+ select NR_CPUS_DEFAULT_2 -+ select SIBYTE_SB1250 -+ select SWAP_IO_SPACE -+ select SYS_HAS_CPU_SB1 -+ select SYS_SUPPORTS_BIG_ENDIAN -+ select SYS_SUPPORTS_LITTLE_ENDIAN -+ -+config SIBYTE_BIGSUR -+ bool "Sibyte BCM91480B-BigSur" -+ select BOOT_ELF32 -+ select DMA_COHERENT -+ select NR_CPUS_DEFAULT_4 -+ select SIBYTE_BCM1x80 -+ select SWAP_IO_SPACE -+ select SYS_HAS_CPU_SB1 -+ select SYS_SUPPORTS_BIG_ENDIAN -+ select SYS_SUPPORTS_HIGHMEM -+ select SYS_SUPPORTS_LITTLE_ENDIAN -+ select ZONE_DMA32 if 64BIT -+ -+config SNI_RM -+ bool "SNI RM200/300/400" -+ select ARC if CPU_LITTLE_ENDIAN -+ select ARC32 if CPU_LITTLE_ENDIAN -+ select SNIPROM if CPU_BIG_ENDIAN -+ select ARCH_MAY_HAVE_PC_FDC -+ select BOOT_ELF32 -+ select CEVT_R4K -+ select CSRC_R4K -+ select DEFAULT_SGI_PARTITION if CPU_BIG_ENDIAN -+ select DMA_NONCOHERENT -+ select GENERIC_ISA_DMA -+ select HW_HAS_EISA -+ select HW_HAS_PCI -+ select IRQ_CPU -+ select I8253 -+ select I8259 -+ select ISA -+ select SWAP_IO_SPACE if CPU_BIG_ENDIAN -+ select SYS_HAS_CPU_R4X00 -+ select SYS_HAS_CPU_R5000 -+ select SYS_HAS_CPU_R10000 -+ select R5000_CPU_SCACHE -+ select SYS_HAS_EARLY_PRINTK -+ select SYS_SUPPORTS_32BIT_KERNEL -+ select SYS_SUPPORTS_64BIT_KERNEL if EXPERIMENTAL -+ select SYS_SUPPORTS_BIG_ENDIAN -+ select SYS_SUPPORTS_HIGHMEM -+ select SYS_SUPPORTS_LITTLE_ENDIAN -+ help -+ The SNI RM200/300/400 are MIPS-based machines manufactured by -+ Siemens Nixdorf Informationssysteme (SNI), parent company of Pyramid -+ Technology and now in turn merged with Fujitsu. Say Y here to -+ support this machine type. -+ -+config MACH_TX39XX -+ bool "Toshiba TX39 series based machines" -+ -+config MACH_TX49XX -+ bool "Toshiba TX49 series based machines" -+ -+config MIKROTIK_RB532 -+ bool "Mikrotik RB532 boards" -+ select CEVT_R4K -+ select CSRC_R4K -+ select DMA_NONCOHERENT -+ select HW_HAS_PCI -+ select IRQ_CPU -+ select SYS_HAS_CPU_MIPS32_R1 -+ select SYS_SUPPORTS_32BIT_KERNEL -+ select SYS_SUPPORTS_LITTLE_ENDIAN -+ select SWAP_IO_SPACE -+ select BOOT_RAW -+ select ARCH_REQUIRE_GPIOLIB -+ help -+ Support the Mikrotik(tm) RouterBoard 532 series, -+ based on the IDT RC32434 SoC. -+ -+config WR_PPMC -+ bool "Wind River PPMC board" -+ select CEVT_R4K -+ select CSRC_R4K -+ select IRQ_CPU -+ select BOOT_ELF32 -+ select DMA_NONCOHERENT -+ select HW_HAS_PCI -+ select PCI_GT64XXX_PCI0 -+ select SWAP_IO_SPACE -+ select SYS_HAS_CPU_MIPS32_R1 -+ select SYS_HAS_CPU_MIPS32_R2 -+ select SYS_HAS_CPU_MIPS64_R1 -+ select SYS_HAS_CPU_NEVADA -+ select SYS_HAS_CPU_RM7000 -+ select SYS_SUPPORTS_32BIT_KERNEL -+ select SYS_SUPPORTS_64BIT_KERNEL -+ select SYS_SUPPORTS_BIG_ENDIAN -+ select SYS_SUPPORTS_LITTLE_ENDIAN -+ help -+ This enables support for the Wind River MIPS32 4KC PPMC evaluation -+ board, which is based on GT64120 bridge chip. -+ -+config CAVIUM_OCTEON_SIMULATOR -+ bool "Cavium Networks Octeon Simulator" -+ select CEVT_R4K -+ select 64BIT_PHYS_ADDR -+ select DMA_COHERENT -+ select SYS_SUPPORTS_64BIT_KERNEL -+ select SYS_SUPPORTS_BIG_ENDIAN -+ select SYS_SUPPORTS_HIGHMEM -+ select SYS_SUPPORTS_HOTPLUG_CPU -+ select SYS_HAS_CPU_CAVIUM_OCTEON -+ help -+ The Octeon simulator is software performance model of the Cavium -+ Octeon Processor. It supports simulating Octeon processors on x86 -+ hardware. -+ -+config CAVIUM_OCTEON_REFERENCE_BOARD -+ bool "Cavium Networks Octeon reference board" -+ select CEVT_R4K -+ select 64BIT_PHYS_ADDR -+ select DMA_COHERENT -+ select SYS_SUPPORTS_64BIT_KERNEL -+ select SYS_SUPPORTS_BIG_ENDIAN -+ select SYS_SUPPORTS_HIGHMEM -+ select SYS_SUPPORTS_HOTPLUG_CPU -+ select SYS_HAS_EARLY_PRINTK -+ select SYS_HAS_CPU_CAVIUM_OCTEON -+ select SWAP_IO_SPACE -+ select HW_HAS_PCI -+ select ARCH_SUPPORTS_MSI -+ select ZONE_DMA32 -+ select USB_ARCH_HAS_OHCI -+ select USB_ARCH_HAS_EHCI -+ help -+ This option supports all of the Octeon reference boards from Cavium -+ Networks. It builds a kernel that dynamically determines the Octeon -+ CPU type and supports all known board reference implementations. -+ Some of the supported boards are: -+ EBT3000 -+ EBH3000 -+ EBH3100 -+ Thunder -+ Kodama -+ Hikari -+ Say Y here for most Octeon reference boards. -+ -+endchoice -+ -+source "arch/mips/alchemy/Kconfig" -+source "arch/mips/ar71xx/Kconfig" -+source "arch/mips/ath79/Kconfig" -+source "arch/mips/bcm63xx/Kconfig" -+source "arch/mips/jazz/Kconfig" -+source "arch/mips/jz4740/Kconfig" -+source "arch/mips/lasat/Kconfig" -+source "arch/mips/pmc-sierra/Kconfig" -+source "arch/mips/powertv/Kconfig" -+source "arch/mips/sgi-ip27/Kconfig" -+source "arch/mips/sibyte/Kconfig" -+source "arch/mips/txx9/Kconfig" -+source "arch/mips/vr41xx/Kconfig" -+source "arch/mips/cavium-octeon/Kconfig" -+source "arch/mips/loongson/Kconfig" -+ -+endmenu -+ -+config RWSEM_GENERIC_SPINLOCK -+ bool -+ default y -+ -+config RWSEM_XCHGADD_ALGORITHM -+ bool -+ -+config ARCH_HAS_ILOG2_U32 -+ bool -+ default n -+ -+config ARCH_HAS_ILOG2_U64 -+ bool -+ default n -+ -+config ARCH_SUPPORTS_OPROFILE -+ bool -+ default y if !MIPS_MT_SMTC -+ -+config GENERIC_FIND_NEXT_BIT -+ bool -+ default y -+ -+config GENERIC_FIND_BIT_LE -+ bool -+ default y -+ -+config GENERIC_HWEIGHT -+ bool -+ default y -+ -+config GENERIC_CALIBRATE_DELAY -+ bool -+ default y -+ -+config GENERIC_CLOCKEVENTS -+ bool -+ default y -+ -+config GENERIC_CMOS_UPDATE -+ bool -+ default y -+ -+config SCHED_OMIT_FRAME_POINTER -+ bool -+ default y -+ -+# -+# Select some configuration options automatically based on user selections. -+# -+config ARC -+ bool -+ -+config ARCH_MAY_HAVE_PC_FDC -+ bool -+ -+config BOOT_RAW -+ bool -+ -+config CEVT_BCM1480 -+ bool -+ -+config CEVT_DS1287 -+ bool -+ -+config CEVT_GT641XX -+ bool -+ -+config CEVT_R4K_LIB -+ bool -+ -+config CEVT_R4K -+ select CEVT_R4K_LIB -+ bool -+ -+config CEVT_SB1250 -+ bool -+ -+config CEVT_TXX9 -+ bool -+ -+config CSRC_BCM1480 -+ bool -+ -+config CSRC_IOASIC -+ bool -+ -+config CSRC_POWERTV -+ bool -+ -+config CSRC_R4K_LIB -+ bool -+ -+config CSRC_R4K -+ select CSRC_R4K_LIB -+ bool -+ -+config CSRC_SB1250 -+ bool -+ -+config GPIO_TXX9 -+ select GENERIC_GPIO -+ select ARCH_REQUIRE_GPIOLIB -+ bool -+ -+config CFE -+ bool -+ -+config ARCH_DMA_ADDR_T_64BIT -+ def_bool (HIGHMEM && 64BIT_PHYS_ADDR) || 64BIT -+ -+config DMA_COHERENT -+ bool -+ -+config DMA_NONCOHERENT -+ bool -+ select NEED_DMA_MAP_STATE -+ -+config NEED_DMA_MAP_STATE -+ bool -+ -+config SYS_HAS_EARLY_PRINTK -+ bool -+ -+config HOTPLUG_CPU -+ bool "Support for hot-pluggable CPUs" -+ depends on SMP && HOTPLUG && SYS_SUPPORTS_HOTPLUG_CPU -+ help -+ Say Y here to allow turning CPUs off and on. CPUs can be -+ controlled through /sys/devices/system/cpu. -+ (Note: power management support will enable this option -+ automatically on SMP systems. ) -+ Say N if you want to disable CPU hotplug. -+ -+config SYS_SUPPORTS_HOTPLUG_CPU -+ bool -+ -+config I8259 -+ bool -+ -+config MIPS_BONITO64 -+ bool -+ -+config MIPS_MSC -+ bool -+ -+config MIPS_NILE4 -+ bool -+ -+config MIPS_DISABLE_OBSOLETE_IDE -+ bool -+ -+config SYNC_R4K -+ bool -+ -+config MIPS_MACHINE -+ def_bool n -+ -+config NO_IOPORT -+ def_bool n -+ -+config GENERIC_ISA_DMA -+ bool -+ select ZONE_DMA if GENERIC_ISA_DMA_SUPPORT_BROKEN=n -+ select ISA_DMA_API -+ -+config GENERIC_ISA_DMA_SUPPORT_BROKEN -+ bool -+ select GENERIC_ISA_DMA -+ -+config ISA_DMA_API -+ bool -+ -+config GENERIC_GPIO -+ bool -+ -+# -+# Endianess selection. Sufficiently obscure so many users don't know what to -+# answer,so we try hard to limit the available choices. Also the use of a -+# choice statement should be more obvious to the user. -+# -+choice -+ prompt "Endianess selection" -+ help -+ Some MIPS machines can be configured for either little or big endian -+ byte order. These modes require different kernels and a different -+ Linux distribution. In general there is one preferred byteorder for a -+ particular system but some systems are just as commonly used in the -+ one or the other endianness. -+ -+config CPU_BIG_ENDIAN -+ bool "Big endian" -+ depends on SYS_SUPPORTS_BIG_ENDIAN -+ -+config CPU_LITTLE_ENDIAN -+ bool "Little endian" -+ depends on SYS_SUPPORTS_LITTLE_ENDIAN -+ help -+ -+endchoice -+ -+config EXPORT_UASM -+ bool -+ -+config SYS_SUPPORTS_APM_EMULATION -+ bool -+ -+config SYS_SUPPORTS_BIG_ENDIAN -+ bool -+ -+config SYS_SUPPORTS_LITTLE_ENDIAN -+ bool -+ -+config SYS_SUPPORTS_HUGETLBFS -+ bool -+ depends on CPU_SUPPORTS_HUGEPAGES && 64BIT -+ default y -+ -+config IRQ_CPU -+ bool -+ -+config IRQ_CPU_RM7K -+ bool -+ -+config IRQ_CPU_RM9K -+ bool -+ -+config IRQ_MSP_SLP -+ bool -+ -+config IRQ_MSP_CIC -+ bool -+ -+config IRQ_TXX9 -+ bool -+ -+config IRQ_GT641XX -+ bool -+ -+config IRQ_GIC -+ bool -+ -+config MIPS_BOARDS_GEN -+ bool -+ -+config PCI_GT64XXX_PCI0 -+ bool -+ -+config NO_EXCEPT_FILL -+ bool -+ -+config MIPS_RM9122 -+ bool -+ select SERIAL_RM9000 -+ -+config SOC_EMMA2RH -+ bool -+ select CEVT_R4K -+ select CSRC_R4K -+ select DMA_NONCOHERENT -+ select IRQ_CPU -+ select SWAP_IO_SPACE -+ select SYS_HAS_CPU_R5500 -+ select SYS_SUPPORTS_32BIT_KERNEL -+ select SYS_SUPPORTS_64BIT_KERNEL -+ select SYS_SUPPORTS_BIG_ENDIAN -+ -+config SOC_PNX833X -+ bool -+ select CEVT_R4K -+ select CSRC_R4K -+ select IRQ_CPU -+ select DMA_NONCOHERENT -+ select SYS_HAS_CPU_MIPS32_R2 -+ select SYS_SUPPORTS_32BIT_KERNEL -+ select SYS_SUPPORTS_LITTLE_ENDIAN -+ select SYS_SUPPORTS_BIG_ENDIAN -+ select GENERIC_GPIO -+ select CPU_MIPSR2_IRQ_VI -+ -+config SOC_PNX8335 -+ bool -+ select SOC_PNX833X -+ -+config PNX8550 -+ bool -+ select SOC_PNX8550 -+ -+config SOC_PNX8550 -+ bool -+ select DMA_NONCOHERENT -+ select HW_HAS_PCI -+ select SYS_HAS_CPU_MIPS32_R1 -+ select SYS_HAS_EARLY_PRINTK -+ select SYS_SUPPORTS_32BIT_KERNEL -+ select GENERIC_GPIO -+ -+config SWAP_IO_SPACE -+ bool -+ -+config SERIAL_RM9000 -+ bool -+ -+config SGI_HAS_INDYDOG -+ bool -+ -+config SGI_HAS_HAL2 -+ bool -+ -+config SGI_HAS_SEEQ -+ bool -+ -+config SGI_HAS_WD93 -+ bool -+ -+config SGI_HAS_ZILOG -+ bool -+ -+config SGI_HAS_I8042 -+ bool -+ -+config DEFAULT_SGI_PARTITION -+ bool -+ -+config ARC32 -+ bool -+ -+config SNIPROM -+ bool -+ -+config BOOT_ELF32 -+ bool -+ -+config MIPS_L1_CACHE_SHIFT -+ int -+ default "4" if MACH_DECSTATION || MIKROTIK_RB532 || PMC_MSP4200_EVAL -+ default "6" if MIPS_CPU_SCACHE -+ default "7" if SGI_IP22 || SGI_IP27 || SGI_IP28 || SNI_RM || CPU_CAVIUM_OCTEON -+ default "5" -+ -+config HAVE_STD_PC_SERIAL_PORT -+ bool -+ -+config ARC_CONSOLE -+ bool "ARC console support" -+ depends on SGI_IP22 || SGI_IP28 || (SNI_RM && CPU_LITTLE_ENDIAN) -+ -+config ARC_MEMORY -+ bool -+ depends on MACH_JAZZ || SNI_RM || SGI_IP32 -+ default y -+ -+config ARC_PROMLIB -+ bool -+ depends on MACH_JAZZ || SNI_RM || SGI_IP22 || SGI_IP28 || SGI_IP32 -+ default y -+ -+config ARC64 -+ bool -+ -+config BOOT_ELF64 -+ bool -+ -+menu "CPU selection" -+ -+choice -+ prompt "CPU type" -+ default CPU_R4X00 -+ -+config CPU_LOONGSON2E -+ bool "Loongson 2E" -+ depends on SYS_HAS_CPU_LOONGSON2E -+ select CPU_LOONGSON2 -+ help -+ The Loongson 2E processor implements the MIPS III instruction set -+ with many extensions. -+ -+ It has an internal FPGA northbridge, which is compatible to -+ bonito64. -+ -+config CPU_LOONGSON2F -+ bool "Loongson 2F" -+ depends on SYS_HAS_CPU_LOONGSON2F -+ select CPU_LOONGSON2 -+ select GENERIC_GPIO -+ select ARCH_REQUIRE_GPIOLIB -+ help -+ The Loongson 2F processor implements the MIPS III instruction set -+ with many extensions. -+ -+ Loongson2F have built-in DDR2 and PCIX controller. The PCIX controller -+ have a similar programming interface with FPGA northbridge used in -+ Loongson2E. -+ -+config CPU_MIPS32_R1 -+ bool "MIPS32 Release 1" -+ depends on SYS_HAS_CPU_MIPS32_R1 -+ select CPU_HAS_PREFETCH -+ select CPU_SUPPORTS_32BIT_KERNEL -+ select CPU_SUPPORTS_HIGHMEM -+ help -+ Choose this option to build a kernel for release 1 or later of the -+ MIPS32 architecture. Most modern embedded systems with a 32-bit -+ MIPS processor are based on a MIPS32 processor. If you know the -+ specific type of processor in your system, choose those that one -+ otherwise CPU_MIPS32_R1 is a safe bet for any MIPS32 system. -+ Release 2 of the MIPS32 architecture is available since several -+ years so chances are you even have a MIPS32 Release 2 processor -+ in which case you should choose CPU_MIPS32_R2 instead for better -+ performance. -+ -+config CPU_MIPS32_R2 -+ bool "MIPS32 Release 2" -+ depends on SYS_HAS_CPU_MIPS32_R2 -+ select CPU_HAS_PREFETCH -+ select CPU_SUPPORTS_32BIT_KERNEL -+ select CPU_SUPPORTS_HIGHMEM -+ help -+ Choose this option to build a kernel for release 2 or later of the -+ MIPS32 architecture. Most modern embedded systems with a 32-bit -+ MIPS processor are based on a MIPS32 processor. If you know the -+ specific type of processor in your system, choose those that one -+ otherwise CPU_MIPS32_R1 is a safe bet for any MIPS32 system. -+ -+config CPU_MIPS64_R1 -+ bool "MIPS64 Release 1" -+ depends on SYS_HAS_CPU_MIPS64_R1 -+ select CPU_HAS_PREFETCH -+ select CPU_SUPPORTS_32BIT_KERNEL -+ select CPU_SUPPORTS_64BIT_KERNEL -+ select CPU_SUPPORTS_HIGHMEM -+ select CPU_SUPPORTS_HUGEPAGES -+ help -+ Choose this option to build a kernel for release 1 or later of the -+ MIPS64 architecture. Many modern embedded systems with a 64-bit -+ MIPS processor are based on a MIPS64 processor. If you know the -+ specific type of processor in your system, choose those that one -+ otherwise CPU_MIPS64_R1 is a safe bet for any MIPS64 system. -+ Release 2 of the MIPS64 architecture is available since several -+ years so chances are you even have a MIPS64 Release 2 processor -+ in which case you should choose CPU_MIPS64_R2 instead for better -+ performance. -+ -+config CPU_MIPS64_R2 -+ bool "MIPS64 Release 2" -+ depends on SYS_HAS_CPU_MIPS64_R2 -+ select CPU_HAS_PREFETCH -+ select CPU_SUPPORTS_32BIT_KERNEL -+ select CPU_SUPPORTS_64BIT_KERNEL -+ select CPU_SUPPORTS_HIGHMEM -+ select CPU_SUPPORTS_HUGEPAGES -+ help -+ Choose this option to build a kernel for release 2 or later of the -+ MIPS64 architecture. Many modern embedded systems with a 64-bit -+ MIPS processor are based on a MIPS64 processor. If you know the -+ specific type of processor in your system, choose those that one -+ otherwise CPU_MIPS64_R1 is a safe bet for any MIPS64 system. -+ -+config CPU_R3000 -+ bool "R3000" -+ depends on SYS_HAS_CPU_R3000 -+ select CPU_HAS_WB -+ select CPU_SUPPORTS_32BIT_KERNEL -+ select CPU_SUPPORTS_HIGHMEM -+ help -+ Please make sure to pick the right CPU type. Linux/MIPS is not -+ designed to be generic, i.e. Kernels compiled for R3000 CPUs will -+ *not* work on R4000 machines and vice versa. However, since most -+ of the supported machines have an R4000 (or similar) CPU, R4x00 -+ might be a safe bet. If the resulting kernel does not work, -+ try to recompile with R3000. -+ -+config CPU_TX39XX -+ bool "R39XX" -+ depends on SYS_HAS_CPU_TX39XX -+ select CPU_SUPPORTS_32BIT_KERNEL -+ -+config CPU_VR41XX -+ bool "R41xx" -+ depends on SYS_HAS_CPU_VR41XX -+ select CPU_SUPPORTS_32BIT_KERNEL -+ select CPU_SUPPORTS_64BIT_KERNEL -+ help -+ The options selects support for the NEC VR4100 series of processors. -+ Only choose this option if you have one of these processors as a -+ kernel built with this option will not run on any other type of -+ processor or vice versa. -+ -+config CPU_R4300 -+ bool "R4300" -+ depends on SYS_HAS_CPU_R4300 -+ select CPU_SUPPORTS_32BIT_KERNEL -+ select CPU_SUPPORTS_64BIT_KERNEL -+ help -+ MIPS Technologies R4300-series processors. -+ -+config CPU_R4X00 -+ bool "R4x00" -+ depends on SYS_HAS_CPU_R4X00 -+ select CPU_SUPPORTS_32BIT_KERNEL -+ select CPU_SUPPORTS_64BIT_KERNEL -+ help -+ MIPS Technologies R4000-series processors other than 4300, including -+ the R4000, R4400, R4600, and 4700. -+ -+config CPU_TX49XX -+ bool "R49XX" -+ depends on SYS_HAS_CPU_TX49XX -+ select CPU_HAS_PREFETCH -+ select CPU_SUPPORTS_32BIT_KERNEL -+ select CPU_SUPPORTS_64BIT_KERNEL -+ -+config CPU_R5000 -+ bool "R5000" -+ depends on SYS_HAS_CPU_R5000 -+ select CPU_SUPPORTS_32BIT_KERNEL -+ select CPU_SUPPORTS_64BIT_KERNEL -+ help -+ MIPS Technologies R5000-series processors other than the Nevada. -+ -+config CPU_R5432 -+ bool "R5432" -+ depends on SYS_HAS_CPU_R5432 -+ select CPU_SUPPORTS_32BIT_KERNEL -+ select CPU_SUPPORTS_64BIT_KERNEL -+ -+config CPU_R5500 -+ bool "R5500" -+ depends on SYS_HAS_CPU_R5500 -+ select CPU_SUPPORTS_32BIT_KERNEL -+ select CPU_SUPPORTS_64BIT_KERNEL -+ select CPU_SUPPORTS_HUGEPAGES -+ help -+ NEC VR5500 and VR5500A series processors implement 64-bit MIPS IV -+ instruction set. -+ -+config CPU_R6000 -+ bool "R6000" -+ depends on EXPERIMENTAL -+ depends on SYS_HAS_CPU_R6000 -+ select CPU_SUPPORTS_32BIT_KERNEL -+ help -+ MIPS Technologies R6000 and R6000A series processors. Note these -+ processors are extremely rare and the support for them is incomplete. -+ -+config CPU_NEVADA -+ bool "RM52xx" -+ depends on SYS_HAS_CPU_NEVADA -+ select CPU_SUPPORTS_32BIT_KERNEL -+ select CPU_SUPPORTS_64BIT_KERNEL -+ help -+ QED / PMC-Sierra RM52xx-series ("Nevada") processors. -+ -+config CPU_R8000 -+ bool "R8000" -+ depends on EXPERIMENTAL -+ depends on SYS_HAS_CPU_R8000 -+ select CPU_HAS_PREFETCH -+ select CPU_SUPPORTS_64BIT_KERNEL -+ help -+ MIPS Technologies R8000 processors. Note these processors are -+ uncommon and the support for them is incomplete. -+ -+config CPU_R10000 -+ bool "R10000" -+ depends on SYS_HAS_CPU_R10000 -+ select CPU_HAS_PREFETCH -+ select CPU_SUPPORTS_32BIT_KERNEL -+ select CPU_SUPPORTS_64BIT_KERNEL -+ select CPU_SUPPORTS_HIGHMEM -+ help -+ MIPS Technologies R10000-series processors. -+ -+config CPU_RM7000 -+ bool "RM7000" -+ depends on SYS_HAS_CPU_RM7000 -+ select CPU_HAS_PREFETCH -+ select CPU_SUPPORTS_32BIT_KERNEL -+ select CPU_SUPPORTS_64BIT_KERNEL -+ select CPU_SUPPORTS_HIGHMEM -+ -+config CPU_RM9000 -+ bool "RM9000" -+ depends on SYS_HAS_CPU_RM9000 -+ select CPU_HAS_PREFETCH -+ select CPU_SUPPORTS_32BIT_KERNEL -+ select CPU_SUPPORTS_64BIT_KERNEL -+ select CPU_SUPPORTS_HIGHMEM -+ select WEAK_ORDERING -+ -+config CPU_SB1 -+ bool "SB1" -+ depends on SYS_HAS_CPU_SB1 -+ select CPU_SUPPORTS_32BIT_KERNEL -+ select CPU_SUPPORTS_64BIT_KERNEL -+ select CPU_SUPPORTS_HIGHMEM -+ select WEAK_ORDERING -+ -+config CPU_CAVIUM_OCTEON -+ bool "Cavium Octeon processor" -+ depends on SYS_HAS_CPU_CAVIUM_OCTEON -+ select CPU_HAS_PREFETCH -+ select CPU_SUPPORTS_64BIT_KERNEL -+ select SYS_SUPPORTS_SMP -+ select NR_CPUS_DEFAULT_16 -+ select WEAK_ORDERING -+ select CPU_SUPPORTS_HIGHMEM -+ select CPU_SUPPORTS_HUGEPAGES -+ help -+ The Cavium Octeon processor is a highly integrated chip containing -+ many ethernet hardware widgets for networking tasks. The processor -+ can have up to 16 Mips64v2 cores and 8 integrated gigabit ethernets. -+ Full details can be found at http://www.caviumnetworks.com. -+ -+config CPU_BMIPS3300 -+ bool "BMIPS3300" -+ depends on SYS_HAS_CPU_BMIPS3300 -+ select DMA_NONCOHERENT -+ select IRQ_CPU -+ select SWAP_IO_SPACE -+ select SYS_SUPPORTS_32BIT_KERNEL -+ select WEAK_ORDERING -+ help -+ Broadcom BMIPS3300 processors. -+ -+config CPU_BMIPS4350 -+ bool "BMIPS4350" -+ depends on SYS_HAS_CPU_BMIPS4350 -+ select CPU_SUPPORTS_32BIT_KERNEL -+ select DMA_NONCOHERENT -+ select IRQ_CPU -+ select SWAP_IO_SPACE -+ select SYS_SUPPORTS_SMP -+ select SYS_SUPPORTS_HOTPLUG_CPU -+ select WEAK_ORDERING -+ help -+ Broadcom BMIPS4350 ("VIPER") processors. -+ -+config CPU_BMIPS4380 -+ bool "BMIPS4380" -+ depends on SYS_HAS_CPU_BMIPS4380 -+ select CPU_SUPPORTS_32BIT_KERNEL -+ select DMA_NONCOHERENT -+ select IRQ_CPU -+ select SWAP_IO_SPACE -+ select SYS_SUPPORTS_SMP -+ select SYS_SUPPORTS_HOTPLUG_CPU -+ select WEAK_ORDERING -+ help -+ Broadcom BMIPS4380 processors. -+ -+config CPU_BMIPS5000 -+ bool "BMIPS5000" -+ depends on SYS_HAS_CPU_BMIPS5000 -+ select CPU_SUPPORTS_32BIT_KERNEL -+ select CPU_SUPPORTS_HIGHMEM -+ select DMA_NONCOHERENT -+ select IRQ_CPU -+ select SWAP_IO_SPACE -+ select SYS_SUPPORTS_SMP -+ select SYS_SUPPORTS_HOTPLUG_CPU -+ select WEAK_ORDERING -+ help -+ Broadcom BMIPS5000 processors. -+ -+endchoice -+ -+if CPU_LOONGSON2F -+config CPU_NOP_WORKAROUNDS -+ bool -+ -+config CPU_JUMP_WORKAROUNDS -+ bool -+ -+config CPU_LOONGSON2F_WORKAROUNDS -+ bool "Loongson 2F Workarounds" -+ default y -+ select CPU_NOP_WORKAROUNDS -+ select CPU_JUMP_WORKAROUNDS -+ help -+ Loongson 2F01 / 2F02 processors have the NOP & JUMP issues which -+ require workarounds. Without workarounds the system may hang -+ unexpectedly. For more information please refer to the gas -+ -mfix-loongson2f-nop and -mfix-loongson2f-jump options. -+ -+ Loongson 2F03 and later have fixed these issues and no workarounds -+ are needed. The workarounds have no significant side effect on them -+ but may decrease the performance of the system so this option should -+ be disabled unless the kernel is intended to be run on 2F01 or 2F02 -+ systems. -+ -+ If unsure, please say Y. -+endif # CPU_LOONGSON2F -+ -+config SYS_SUPPORTS_ZBOOT -+ bool -+ select HAVE_KERNEL_GZIP -+ select HAVE_KERNEL_BZIP2 -+ select HAVE_KERNEL_LZMA -+ select HAVE_KERNEL_LZO -+ -+config SYS_SUPPORTS_ZBOOT_UART16550 -+ bool -+ select SYS_SUPPORTS_ZBOOT -+ -+config CPU_LOONGSON2 -+ bool -+ select CPU_SUPPORTS_32BIT_KERNEL -+ select CPU_SUPPORTS_64BIT_KERNEL -+ select CPU_SUPPORTS_HIGHMEM -+ -+config SYS_HAS_CPU_LOONGSON2E -+ bool -+ -+config SYS_HAS_CPU_LOONGSON2F -+ bool -+ select CPU_SUPPORTS_CPUFREQ -+ select CPU_SUPPORTS_ADDRWINCFG if 64BIT -+ select CPU_SUPPORTS_UNCACHED_ACCELERATED -+ -+config SYS_HAS_CPU_MIPS32_R1 -+ bool -+ -+config SYS_HAS_CPU_MIPS32_R2 -+ bool -+ -+config SYS_HAS_CPU_MIPS64_R1 -+ bool -+ -+config SYS_HAS_CPU_MIPS64_R2 -+ bool -+ -+config SYS_HAS_CPU_R3000 -+ bool -+ -+config SYS_HAS_CPU_TX39XX -+ bool -+ -+config SYS_HAS_CPU_VR41XX -+ bool -+ -+config SYS_HAS_CPU_R4300 -+ bool -+ -+config SYS_HAS_CPU_R4X00 -+ bool -+ -+config SYS_HAS_CPU_TX49XX -+ bool -+ -+config SYS_HAS_CPU_R5000 -+ bool -+ -+config SYS_HAS_CPU_R5432 -+ bool -+ -+config SYS_HAS_CPU_R5500 -+ bool -+ -+config SYS_HAS_CPU_R6000 -+ bool -+ -+config SYS_HAS_CPU_NEVADA -+ bool -+ -+config SYS_HAS_CPU_R8000 -+ bool -+ -+config SYS_HAS_CPU_R10000 -+ bool -+ -+config SYS_HAS_CPU_RM7000 -+ bool -+ -+config SYS_HAS_CPU_RM9000 -+ bool -+ -+config SYS_HAS_CPU_SB1 -+ bool -+ -+config SYS_HAS_CPU_CAVIUM_OCTEON -+ bool -+ -+config SYS_HAS_CPU_BMIPS3300 -+ bool -+ -+config SYS_HAS_CPU_BMIPS4350 -+ bool -+ -+config SYS_HAS_CPU_BMIPS4380 -+ bool -+ -+config SYS_HAS_CPU_BMIPS5000 -+ bool -+ -+# -+# CPU may reorder R->R, R->W, W->R, W->W -+# Reordering beyond LL and SC is handled in WEAK_REORDERING_BEYOND_LLSC -+# -+config WEAK_ORDERING -+ bool -+ -+# -+# CPU may reorder reads and writes beyond LL/SC -+# CPU may reorder R->LL, R->LL, W->LL, W->LL, R->SC, R->SC, W->SC, W->SC -+# -+config WEAK_REORDERING_BEYOND_LLSC -+ bool -+endmenu -+ -+# -+# These two indicate any level of the MIPS32 and MIPS64 architecture -+# -+config CPU_MIPS32 -+ bool -+ default y if CPU_MIPS32_R1 || CPU_MIPS32_R2 -+ -+config CPU_MIPS64 -+ bool -+ default y if CPU_MIPS64_R1 || CPU_MIPS64_R2 -+ -+# -+# These two indicate the revision of the architecture, either Release 1 or Release 2 -+# -+config CPU_MIPSR1 -+ bool -+ default y if CPU_MIPS32_R1 || CPU_MIPS64_R1 -+ -+config CPU_MIPSR2 -+ bool -+ default y if CPU_MIPS32_R2 || CPU_MIPS64_R2 || CPU_CAVIUM_OCTEON -+ -+config SYS_SUPPORTS_32BIT_KERNEL -+ bool -+config SYS_SUPPORTS_64BIT_KERNEL -+ bool -+config CPU_SUPPORTS_32BIT_KERNEL -+ bool -+config CPU_SUPPORTS_64BIT_KERNEL -+ bool -+config CPU_SUPPORTS_CPUFREQ -+ bool -+config CPU_SUPPORTS_ADDRWINCFG -+ bool -+config CPU_SUPPORTS_HUGEPAGES -+ bool -+config CPU_SUPPORTS_UNCACHED_ACCELERATED -+ bool -+config MIPS_PGD_C0_CONTEXT -+ bool -+ default y if 64BIT && CPU_MIPSR2 -+ -+# -+# Set to y for ptrace access to watch registers. -+# -+config HARDWARE_WATCHPOINTS -+ bool -+ default y if CPU_MIPSR1 || CPU_MIPSR2 -+ -+menu "Kernel type" -+ -+choice -+ -+ prompt "Kernel code model" -+ help -+ You should only select this option if you have a workload that -+ actually benefits from 64-bit processing or if your machine has -+ large memory. You will only be presented a single option in this -+ menu if your system does not support both 32-bit and 64-bit kernels. -+ -+config 32BIT -+ bool "32-bit kernel" -+ depends on CPU_SUPPORTS_32BIT_KERNEL && SYS_SUPPORTS_32BIT_KERNEL -+ select TRAD_SIGNALS -+ help -+ Select this option if you want to build a 32-bit kernel. -+config 64BIT -+ bool "64-bit kernel" -+ depends on CPU_SUPPORTS_64BIT_KERNEL && SYS_SUPPORTS_64BIT_KERNEL -+ select HAVE_SYSCALL_WRAPPERS -+ help -+ Select this option if you want to build a 64-bit kernel. -+ -+endchoice -+ -+choice -+ prompt "Kernel page size" -+ default PAGE_SIZE_4KB -+ -+config PAGE_SIZE_4KB -+ bool "4kB" -+ depends on !CPU_LOONGSON2 -+ help -+ This option select the standard 4kB Linux page size. On some -+ R3000-family processors this is the only available page size. Using -+ 4kB page size will minimize memory consumption and is therefore -+ recommended for low memory systems. -+ -+config PAGE_SIZE_8KB -+ bool "8kB" -+ depends on (EXPERIMENTAL && CPU_R8000) || CPU_CAVIUM_OCTEON -+ help -+ Using 8kB page size will result in higher performance kernel at -+ the price of higher memory consumption. This option is available -+ only on R8000 and cnMIPS processors. Note that you will need a -+ suitable Linux distribution to support this. -+ -+config PAGE_SIZE_16KB -+ bool "16kB" -+ depends on !CPU_R3000 && !CPU_TX39XX -+ help -+ Using 16kB page size will result in higher performance kernel at -+ the price of higher memory consumption. This option is available on -+ all non-R3000 family processors. Note that you will need a suitable -+ Linux distribution to support this. -+ -+config PAGE_SIZE_32KB -+ bool "32kB" -+ depends on CPU_CAVIUM_OCTEON -+ help -+ Using 32kB page size will result in higher performance kernel at -+ the price of higher memory consumption. This option is available -+ only on cnMIPS cores. Note that you will need a suitable Linux -+ distribution to support this. -+ -+config PAGE_SIZE_64KB -+ bool "64kB" -+ depends on EXPERIMENTAL && !CPU_R3000 && !CPU_TX39XX -+ help -+ Using 64kB page size will result in higher performance kernel at -+ the price of higher memory consumption. This option is available on -+ all non-R3000 family processor. Not that at the time of this -+ writing this option is still high experimental. -+ -+endchoice -+ -+config FORCE_MAX_ZONEORDER -+ int "Maximum zone order" -+ range 13 64 if SYS_SUPPORTS_HUGETLBFS && PAGE_SIZE_32KB -+ default "13" if SYS_SUPPORTS_HUGETLBFS && PAGE_SIZE_32KB -+ range 12 64 if SYS_SUPPORTS_HUGETLBFS && PAGE_SIZE_16KB -+ default "12" if SYS_SUPPORTS_HUGETLBFS && PAGE_SIZE_16KB -+ range 11 64 -+ default "11" -+ help -+ The kernel memory allocator divides physically contiguous memory -+ blocks into "zones", where each zone is a power of two number of -+ pages. This option selects the largest power of two that the kernel -+ keeps in the memory allocator. If you need to allocate very large -+ blocks of physically contiguous memory, then you may need to -+ increase this value. -+ -+ This config option is actually maximum order plus one. For example, -+ a value of 11 means that the largest free memory block is 2^10 pages. -+ -+ The page size is not necessarily 4KB. Keep this in mind -+ when choosing a value for this option. -+ -+config BOARD_SCACHE -+ bool -+ -+config IP22_CPU_SCACHE -+ bool -+ select BOARD_SCACHE -+ -+# -+# Support for a MIPS32 / MIPS64 style S-caches -+# -+config MIPS_CPU_SCACHE -+ bool -+ select BOARD_SCACHE -+ -+config R5000_CPU_SCACHE -+ bool -+ select BOARD_SCACHE -+ -+config RM7000_CPU_SCACHE -+ bool -+ select BOARD_SCACHE -+ -+config SIBYTE_DMA_PAGEOPS -+ bool "Use DMA to clear/copy pages" -+ depends on CPU_SB1 -+ help -+ Instead of using the CPU to zero and copy pages, use a Data Mover -+ channel. These DMA channels are otherwise unused by the standard -+ SiByte Linux port. Seems to give a small performance benefit. -+ -+config CPU_HAS_PREFETCH -+ bool -+ -+choice -+ prompt "MIPS MT options" -+ -+config MIPS_MT_DISABLED -+ bool "Disable multithreading support." -+ help -+ Use this option if your workload can't take advantage of -+ MIPS hardware multithreading support. On systems that don't have -+ the option of an MT-enabled processor this option will be the only -+ option in this menu. -+ -+config MIPS_MT_SMP -+ bool "Use 1 TC on each available VPE for SMP" -+ depends on SYS_SUPPORTS_MULTITHREADING -+ select CPU_MIPSR2_IRQ_VI -+ select CPU_MIPSR2_IRQ_EI -+ select MIPS_MT -+ select NR_CPUS_DEFAULT_2 -+ select SMP -+ select SYS_SUPPORTS_SCHED_SMT if SMP -+ select SYS_SUPPORTS_SMP -+ select SMP_UP -+ help -+ This is a kernel model which is known a VSMP but lately has been -+ marketesed into SMVP. -+ Virtual SMP uses the processor's VPEs to implement virtual -+ processors. In currently available configuration of the 34K processor -+ this allows for a dual processor. Both processors will share the same -+ primary caches; each will obtain the half of the TLB for it's own -+ exclusive use. For a layman this model can be described as similar to -+ what Intel calls Hyperthreading. -+ -+ For further information see http://www.linux-mips.org/wiki/34K#VSMP -+ -+config MIPS_MT_SMTC -+ bool "SMTC: Use all TCs on all VPEs for SMP" -+ depends on CPU_MIPS32_R2 -+ #depends on CPU_MIPS64_R2 # once there is hardware ... -+ depends on SYS_SUPPORTS_MULTITHREADING -+ select CPU_MIPSR2_IRQ_VI -+ select CPU_MIPSR2_IRQ_EI -+ select MIPS_MT -+ select NR_CPUS_DEFAULT_8 -+ select SMP -+ select SYS_SUPPORTS_SMP -+ select SMP_UP -+ help -+ This is a kernel model which is known a SMTC or lately has been -+ marketesed into SMVP. -+ is presenting the available TC's of the core as processors to Linux. -+ On currently available 34K processors this means a Linux system will -+ see up to 5 processors. The implementation of the SMTC kernel differs -+ significantly from VSMP and cannot efficiently coexist in the same -+ kernel binary so the choice between VSMP and SMTC is a compile time -+ decision. -+ -+ For further information see http://www.linux-mips.org/wiki/34K#SMTC -+ -+endchoice -+ -+config MIPS_MT -+ bool -+ -+config SCHED_SMT -+ bool "SMT (multithreading) scheduler support" -+ depends on SYS_SUPPORTS_SCHED_SMT -+ default n -+ help -+ SMT scheduler support improves the CPU scheduler's decision making -+ when dealing with MIPS MT enabled cores at a cost of slightly -+ increased overhead in some places. If unsure say N here. -+ -+config SYS_SUPPORTS_SCHED_SMT -+ bool -+ -+ -+config SYS_SUPPORTS_MULTITHREADING -+ bool -+ -+config MIPS_MT_FPAFF -+ bool "Dynamic FPU affinity for FP-intensive threads" -+ default y -+ depends on MIPS_MT_SMP || MIPS_MT_SMTC -+ -+config MIPS_VPE_LOADER -+ bool "VPE loader support." -+ depends on SYS_SUPPORTS_MULTITHREADING -+ select CPU_MIPSR2_IRQ_VI -+ select CPU_MIPSR2_IRQ_EI -+ select MIPS_MT -+ help -+ Includes a loader for loading an elf relocatable object -+ onto another VPE and running it. -+ -+config MIPS_MT_SMTC_IM_BACKSTOP -+ bool "Use per-TC register bits as backstop for inhibited IM bits" -+ depends on MIPS_MT_SMTC -+ default n -+ help -+ To support multiple TC microthreads acting as "CPUs" within -+ a VPE, VPE-wide interrupt mask bits must be specially manipulated -+ during interrupt handling. To support legacy drivers and interrupt -+ controller management code, SMTC has a "backstop" to track and -+ if necessary restore the interrupt mask. This has some performance -+ impact on interrupt service overhead. -+ -+config MIPS_MT_SMTC_IRQAFF -+ bool "Support IRQ affinity API" -+ depends on MIPS_MT_SMTC -+ default n -+ help -+ Enables SMP IRQ affinity API (/proc/irq/*/smp_affinity, etc.) -+ for SMTC Linux kernel. Requires platform support, of which -+ an example can be found in the MIPS kernel i8259 and Malta -+ platform code. Adds some overhead to interrupt dispatch, and -+ should be used only if you know what you are doing. -+ -+config MIPS_VPE_LOADER_TOM -+ bool "Load VPE program into memory hidden from linux" -+ depends on MIPS_VPE_LOADER -+ default y -+ help -+ The loader can use memory that is present but has been hidden from -+ Linux using the kernel command line option "mem=xxMB". It's up to -+ you to ensure the amount you put in the option and the space your -+ program requires is less or equal to the amount physically present. -+ -+# this should possibly be in drivers/char, but it is rather cpu related. Hmmm -+config MIPS_VPE_APSP_API -+ bool "Enable support for AP/SP API (RTLX)" -+ depends on MIPS_VPE_LOADER -+ help -+ -+config MIPS_APSP_KSPD -+ bool "Enable KSPD" -+ depends on MIPS_VPE_APSP_API -+ default y -+ help -+ KSPD is a kernel daemon that accepts syscall requests from the SP -+ side, actions them and returns the results. It also handles the -+ "exit" syscall notifying other kernel modules the SP program is -+ exiting. You probably want to say yes here. -+ -+config MIPS_CMP -+ bool "MIPS CMP framework support" -+ depends on SYS_SUPPORTS_MIPS_CMP -+ select SYNC_R4K -+ select SYS_SUPPORTS_SMP -+ select SYS_SUPPORTS_SCHED_SMT if SMP -+ select WEAK_ORDERING -+ default n -+ help -+ This is a placeholder option for the GCMP work. It will need to -+ be handled differently... -+ -+config SB1_PASS_1_WORKAROUNDS -+ bool -+ depends on CPU_SB1_PASS_1 -+ default y -+ -+config SB1_PASS_2_WORKAROUNDS -+ bool -+ depends on CPU_SB1 && (CPU_SB1_PASS_2_2 || CPU_SB1_PASS_2) -+ default y -+ -+config SB1_PASS_2_1_WORKAROUNDS -+ bool -+ depends on CPU_SB1 && CPU_SB1_PASS_2 -+ default y -+ -+config 64BIT_PHYS_ADDR -+ bool -+ -+config ARCH_PHYS_ADDR_T_64BIT -+ def_bool 64BIT_PHYS_ADDR -+ -+config CPU_HAS_SMARTMIPS -+ depends on SYS_SUPPORTS_SMARTMIPS -+ bool "Support for the SmartMIPS ASE" -+ help -+ SmartMIPS is a extension of the MIPS32 architecture aimed at -+ increased security at both hardware and software level for -+ smartcards. Enabling this option will allow proper use of the -+ SmartMIPS instructions by Linux applications. However a kernel with -+ this option will not work on a MIPS core without SmartMIPS core. If -+ you don't know you probably don't have SmartMIPS and should say N -+ here. -+ -+config CPU_HAS_WB -+ bool -+ -+# -+# Vectored interrupt mode is an R2 feature -+# -+config CPU_MIPSR2_IRQ_VI -+ bool -+ -+# -+# Extended interrupt mode is an R2 feature -+# -+config CPU_MIPSR2_IRQ_EI -+ bool -+ -+config CPU_HAS_SYNC -+ bool -+ depends on !CPU_R3000 -+ default y -+ -+config GENERIC_CLOCKEVENTS_BROADCAST -+ bool -+ -+# -+# CPU non-features -+# -+config CPU_DADDI_WORKAROUNDS -+ bool -+ -+config CPU_R4000_WORKAROUNDS -+ bool -+ select CPU_R4400_WORKAROUNDS -+ -+config CPU_R4400_WORKAROUNDS -+ bool -+ -+# -+# - Highmem only makes sense for the 32-bit kernel. -+# - The current highmem code will only work properly on physically indexed -+# caches such as R3000, SB1, R7000 or those that look like they're virtually -+# indexed such as R4000/R4400 SC and MC versions or R10000. So for the -+# moment we protect the user and offer the highmem option only on machines -+# where it's known to be safe. This will not offer highmem on a few systems -+# such as MIPS32 and MIPS64 CPUs which may have virtual and physically -+# indexed CPUs but we're playing safe. -+# - We use SYS_SUPPORTS_HIGHMEM to offer highmem only for systems where we -+# know they might have memory configurations that could make use of highmem -+# support. -+# -+config HIGHMEM -+ bool "High Memory Support" -+ depends on 32BIT && CPU_SUPPORTS_HIGHMEM && SYS_SUPPORTS_HIGHMEM -+ -+config CPU_SUPPORTS_HIGHMEM -+ bool -+ -+config SYS_SUPPORTS_HIGHMEM -+ bool -+ -+config SYS_SUPPORTS_SMARTMIPS -+ bool -+ -+config ARCH_FLATMEM_ENABLE -+ def_bool y -+ depends on !NUMA && !CPU_LOONGSON2 -+ -+config ARCH_DISCONTIGMEM_ENABLE -+ bool -+ default y if SGI_IP27 -+ help -+ Say Y to support efficient handling of discontiguous physical memory, -+ for architectures which are either NUMA (Non-Uniform Memory Access) -+ or have huge holes in the physical address space for other reasons. -+ See <file:Documentation/vm/numa> for more. -+ -+config ARCH_POPULATES_NODE_MAP -+ def_bool y -+ -+config ARCH_SPARSEMEM_ENABLE -+ bool -+ select SPARSEMEM_STATIC -+ -+config NUMA -+ bool "NUMA Support" -+ depends on SYS_SUPPORTS_NUMA -+ help -+ Say Y to compile the kernel to support NUMA (Non-Uniform Memory -+ Access). This option improves performance on systems with more -+ than two nodes; on two node systems it is generally better to -+ leave it disabled; on single node systems disable this option -+ disabled. -+ -+config SYS_SUPPORTS_NUMA -+ bool -+ -+config NODES_SHIFT -+ int -+ default "6" -+ depends on NEED_MULTIPLE_NODES -+ -+config HW_PERF_EVENTS -+ bool "Enable hardware performance counter support for perf events" -+ depends on PERF_EVENTS && !MIPS_MT_SMTC && OPROFILE=n && CPU_MIPS32 -+ default y -+ help -+ Enable hardware performance counter support for perf events. If -+ disabled, perf events will use software events only. -+ -+source "mm/Kconfig" -+ -+config SMP -+ bool "Multi-Processing support" -+ depends on SYS_SUPPORTS_SMP -+ select IRQ_PER_CPU -+ select USE_GENERIC_SMP_HELPERS -+ help -+ This enables support for systems with more than one CPU. If you have -+ a system with only one CPU, like most personal computers, say N. If -+ you have a system with more than one CPU, say Y. -+ -+ If you say N here, the kernel will run on single and multiprocessor -+ machines, but will use only one CPU of a multiprocessor machine. If -+ you say Y here, the kernel will run on many, but not all, -+ singleprocessor machines. On a singleprocessor machine, the kernel -+ will run faster if you say N here. -+ -+ People using multiprocessor machines who say Y here should also say -+ Y to "Enhanced Real Time Clock Support", below. -+ -+ See also the SMP-HOWTO available at -+ <http://www.tldp.org/docs.html#howto>. -+ -+ If you don't know what to do here, say N. -+ -+config SMP_UP -+ bool -+ -+config SYS_SUPPORTS_MIPS_CMP -+ bool -+ -+config SYS_SUPPORTS_SMP -+ bool -+ -+config NR_CPUS_DEFAULT_1 -+ bool -+ -+config NR_CPUS_DEFAULT_2 -+ bool -+ -+config NR_CPUS_DEFAULT_4 -+ bool -+ -+config NR_CPUS_DEFAULT_8 -+ bool -+ -+config NR_CPUS_DEFAULT_16 -+ bool -+ -+config NR_CPUS_DEFAULT_32 -+ bool -+ -+config NR_CPUS_DEFAULT_64 -+ bool -+ -+config NR_CPUS -+ int "Maximum number of CPUs (2-64)" -+ range 1 64 if NR_CPUS_DEFAULT_1 -+ depends on SMP -+ default "1" if NR_CPUS_DEFAULT_1 -+ default "2" if NR_CPUS_DEFAULT_2 -+ default "4" if NR_CPUS_DEFAULT_4 -+ default "8" if NR_CPUS_DEFAULT_8 -+ default "16" if NR_CPUS_DEFAULT_16 -+ default "32" if NR_CPUS_DEFAULT_32 -+ default "64" if NR_CPUS_DEFAULT_64 -+ help -+ This allows you to specify the maximum number of CPUs which this -+ kernel will support. The maximum supported value is 32 for 32-bit -+ kernel and 64 for 64-bit kernels; the minimum value which makes -+ sense is 1 for Qemu (useful only for kernel debugging purposes) -+ and 2 for all others. -+ -+ This is purely to save memory - each supported CPU adds -+ approximately eight kilobytes to the kernel image. For best -+ performance should round up your number of processors to the next -+ power of two. -+ -+source "kernel/time/Kconfig" -+ -+# -+# Timer Interrupt Frequency Configuration -+# -+ -+choice -+ prompt "Timer frequency" -+ default HZ_250 -+ help -+ Allows the configuration of the timer frequency. -+ -+ config HZ_48 -+ bool "48 HZ" if SYS_SUPPORTS_48HZ || SYS_SUPPORTS_ARBIT_HZ -+ -+ config HZ_100 -+ bool "100 HZ" if SYS_SUPPORTS_100HZ || SYS_SUPPORTS_ARBIT_HZ -+ -+ config HZ_128 -+ bool "128 HZ" if SYS_SUPPORTS_128HZ || SYS_SUPPORTS_ARBIT_HZ -+ -+ config HZ_250 -+ bool "250 HZ" if SYS_SUPPORTS_250HZ || SYS_SUPPORTS_ARBIT_HZ -+ -+ config HZ_256 -+ bool "256 HZ" if SYS_SUPPORTS_256HZ || SYS_SUPPORTS_ARBIT_HZ -+ -+ config HZ_1000 -+ bool "1000 HZ" if SYS_SUPPORTS_1000HZ || SYS_SUPPORTS_ARBIT_HZ -+ -+ config HZ_1024 -+ bool "1024 HZ" if SYS_SUPPORTS_1024HZ || SYS_SUPPORTS_ARBIT_HZ -+ -+endchoice -+ -+config SYS_SUPPORTS_48HZ -+ bool -+ -+config SYS_SUPPORTS_100HZ -+ bool -+ -+config SYS_SUPPORTS_128HZ -+ bool -+ -+config SYS_SUPPORTS_250HZ -+ bool -+ -+config SYS_SUPPORTS_256HZ -+ bool -+ -+config SYS_SUPPORTS_1000HZ -+ bool -+ -+config SYS_SUPPORTS_1024HZ -+ bool -+ -+config SYS_SUPPORTS_ARBIT_HZ -+ bool -+ default y if !SYS_SUPPORTS_48HZ && !SYS_SUPPORTS_100HZ && \ -+ !SYS_SUPPORTS_128HZ && !SYS_SUPPORTS_250HZ && \ -+ !SYS_SUPPORTS_256HZ && !SYS_SUPPORTS_1000HZ && \ -+ !SYS_SUPPORTS_1024HZ -+ -+config HZ -+ int -+ default 48 if HZ_48 -+ default 100 if HZ_100 -+ default 128 if HZ_128 -+ default 250 if HZ_250 -+ default 256 if HZ_256 -+ default 1000 if HZ_1000 -+ default 1024 if HZ_1024 -+ -+source "kernel/Kconfig.preempt" -+ -+config MIPS_INSANE_LARGE -+ bool "Support for large 64-bit configurations" -+ depends on CPU_R10000 && 64BIT -+ help -+ MIPS R10000 does support a 44 bit / 16TB address space as opposed to -+ previous 64-bit processors which only supported 40 bit / 1TB. If you -+ need processes of more than 1TB virtual address space, say Y here. -+ This will result in additional memory usage, so it is not -+ recommended for normal users. -+ -+config KEXEC -+ bool "Kexec system call (EXPERIMENTAL)" -+ depends on EXPERIMENTAL -+ help -+ kexec is a system call that implements the ability to shutdown your -+ current kernel, and to start another kernel. It is like a reboot -+ but it is independent of the system firmware. And like a reboot -+ you can start any kernel with it, not just Linux. -+ -+ The name comes from the similarity to the exec system call. -+ -+ It is an ongoing process to be certain the hardware in a machine -+ is properly shutdown, so do not be surprised if this code does not -+ initially work for you. It may help to enable device hotplugging -+ support. As of this writing the exact hardware interface is -+ strongly in flux, so no good recommendation can be made. -+ -+config SECCOMP -+ bool "Enable seccomp to safely compute untrusted bytecode" -+ depends on PROC_FS -+ default y -+ help -+ This kernel feature is useful for number crunching applications -+ that may need to compute untrusted bytecode during their -+ execution. By using pipes or other transports made available to -+ the process as file descriptors supporting the read/write -+ syscalls, it's possible to isolate those applications in -+ their own address space using seccomp. Once seccomp is -+ enabled via /proc/<pid>/seccomp, it cannot be disabled -+ and the task is only allowed to execute a few safe syscalls -+ defined by each seccomp mode. -+ -+ If unsure, say Y. Only embedded should say N here. -+ -+config USE_OF -+ bool "Flattened Device Tree support" -+ select OF -+ select OF_EARLY_FLATTREE -+ help -+ Include support for flattened device tree machine descriptions. -+ -+endmenu -+ -+config LOCKDEP_SUPPORT -+ bool -+ default y -+ -+config STACKTRACE_SUPPORT -+ bool -+ default y -+ -+source "init/Kconfig" -+ -+source "kernel/Kconfig.freezer" -+ -+menu "Bus options (PCI, PCMCIA, EISA, ISA, TC)" -+ -+config HW_HAS_EISA -+ bool -+config HW_HAS_PCI -+ bool -+ -+config PCI -+ bool "Support for PCI controller" -+ depends on HW_HAS_PCI -+ select PCI_DOMAINS -+ help -+ Find out whether you have a PCI motherboard. PCI is the name of a -+ bus system, i.e. the way the CPU talks to the other stuff inside -+ your box. Other bus systems are ISA, EISA, or VESA. If you have PCI, -+ say Y, otherwise N. -+ -+config PCI_DOMAINS -+ bool -+ -+source "drivers/pci/Kconfig" -+ -+# -+# ISA support is now enabled via select. Too many systems still have the one -+# or other ISA chip on the board that users don't know about so don't expect -+# users to choose the right thing ... -+# -+config ISA -+ bool -+ -+config EISA -+ bool "EISA support" -+ depends on HW_HAS_EISA -+ select ISA -+ select GENERIC_ISA_DMA -+ ---help--- -+ The Extended Industry Standard Architecture (EISA) bus was -+ developed as an open alternative to the IBM MicroChannel bus. -+ -+ The EISA bus provided some of the features of the IBM MicroChannel -+ bus while maintaining backward compatibility with cards made for -+ the older ISA bus. The EISA bus saw limited use between 1988 and -+ 1995 when it was made obsolete by the PCI bus. -+ -+ Say Y here if you are building a kernel for an EISA-based machine. -+ -+ Otherwise, say N. -+ -+source "drivers/eisa/Kconfig" -+ -+config TC -+ bool "TURBOchannel support" -+ depends on MACH_DECSTATION -+ help -+ TURBOchannel is a DEC (now Compaq (now HP)) bus for Alpha and MIPS -+ processors. TURBOchannel programming specifications are available -+ at: -+ <ftp://ftp.hp.com/pub/alphaserver/archive/triadd/> -+ and: -+ <http://www.computer-refuge.org/classiccmp/ftp.digital.com/pub/DEC/TriAdd/> -+ Linux driver support status is documented at: -+ <http://www.linux-mips.org/wiki/DECstation> -+ -+#config ACCESSBUS -+# bool "Access.Bus support" -+# depends on TC -+ -+config MMU -+ bool -+ default y -+ -+config I8253 -+ bool -+ select MIPS_EXTERNAL_TIMER -+ -+config ZONE_DMA32 -+ bool -+ -+source "drivers/pcmcia/Kconfig" -+ -+source "drivers/pci/hotplug/Kconfig" -+ -+config RAPIDIO -+ bool "RapidIO support" -+ depends on PCI -+ default n -+ help -+ If you say Y here, the kernel will include drivers and -+ infrastructure code to support RapidIO interconnect devices. -+ -+source "drivers/rapidio/Kconfig" -+ -+endmenu -+ -+menu "Executable file formats" -+ -+source "fs/Kconfig.binfmt" -+ -+config TRAD_SIGNALS -+ bool -+ -+config MIPS32_COMPAT -+ bool "Kernel support for Linux/MIPS 32-bit binary compatibility" -+ depends on 64BIT -+ help -+ Select this option if you want Linux/MIPS 32-bit binary -+ compatibility. Since all software available for Linux/MIPS is -+ currently 32-bit you should say Y here. -+ -+config COMPAT -+ bool -+ depends on MIPS32_COMPAT -+ default y -+ -+config SYSVIPC_COMPAT -+ bool -+ depends on COMPAT && SYSVIPC -+ default y -+ -+config MIPS32_O32 -+ bool "Kernel support for o32 binaries" -+ depends on MIPS32_COMPAT -+ help -+ Select this option if you want to run o32 binaries. These are pure -+ 32-bit binaries as used by the 32-bit Linux/MIPS port. Most of -+ existing binaries are in this format. -+ -+ If unsure, say Y. -+ -+config MIPS32_N32 -+ bool "Kernel support for n32 binaries" -+ depends on MIPS32_COMPAT -+ help -+ Select this option if you want to run n32 binaries. These are -+ 64-bit binaries using 32-bit quantities for addressing and certain -+ data that would normally be 64-bit. They are used in special -+ cases. -+ -+ If unsure, say N. -+ -+config BINFMT_ELF32 -+ bool -+ default y if MIPS32_O32 || MIPS32_N32 -+ -+endmenu -+ -+menu "Power management options" -+ -+config ARCH_HIBERNATION_POSSIBLE -+ def_bool y -+ depends on SYS_SUPPORTS_HOTPLUG_CPU || !SMP -+ -+config ARCH_SUSPEND_POSSIBLE -+ def_bool y -+ depends on SYS_SUPPORTS_HOTPLUG_CPU || !SMP -+ -+source "kernel/power/Kconfig" -+ -+endmenu -+ -+source "arch/mips/kernel/cpufreq/Kconfig" -+ -+source "net/Kconfig" -+ -+source "drivers/Kconfig" -+ -+source "fs/Kconfig" -+ -+source "arch/mips/Kconfig.debug" -+ -+source "security/Kconfig" -+ -+source "crypto/Kconfig" -+ -+menuconfig VIRTUALIZATION -+ bool "Virtualization" -+ default n -+ ---help--- -+ Say Y here to get to see options for using your Linux host to run other -+ operating systems inside virtual machines (guests). -+ This option alone does not add any kernel code. -+ -+ If you say N, all options in this submenu will be skipped and disabled. -+ -+if VIRTUALIZATION -+ -+source drivers/virtio/Kconfig -+ -+endif # VIRTUALIZATION -+ -+source "lib/Kconfig" diff -Nur linux-2.6.39.orig/arch/mips/kernel/traps.c linux-2.6.39/arch/mips/kernel/traps.c --- linux-2.6.39.orig/arch/mips/kernel/traps.c 2011-05-19 06:06:34.000000000 +0200 -+++ linux-2.6.39/arch/mips/kernel/traps.c 2011-08-24 05:53:05.179230891 +0200 ++++ linux-2.6.39/arch/mips/kernel/traps.c 2011-08-24 18:17:24.000000000 +0200 @@ -54,6 +54,7 @@ #include <asm/types.h> #include <asm/stacktrace.h> @@ -15121,34 +12670,9 @@ diff -Nur linux-2.6.39.orig/arch/mips/kernel/traps.c linux-2.6.39/arch/mips/kern cp0_perfcount_irq = (read_c0_intctl() >> INTCTLB_IPPCI) & 7; if (cp0_perfcount_irq == cp0_compare_irq) cp0_perfcount_irq = -1; -diff -Nur linux-2.6.39.orig/arch/mips/Makefile linux-2.6.39/arch/mips/Makefile ---- linux-2.6.39.orig/arch/mips/Makefile 2011-05-19 06:06:34.000000000 +0200 -+++ linux-2.6.39/arch/mips/Makefile 2011-08-24 02:42:39.917989402 +0200 -@@ -158,6 +158,13 @@ - endif - cflags-$(CONFIG_CAVIUM_CN63XXP1) += -Wa,-mfix-cn63xxp1 - -+# -+# Atheros AR71xx -+# -+core-$(CONFIG_ATHEROS_AR71XX) += arch/mips/ar71xx/ -+cflags-$(CONFIG_ATHEROS_AR71XX) += -I$(srctree)/arch/mips/include/asm/mach-ar71xx -+load-$(CONFIG_ATHEROS_AR71XX) += 0xffffffff80060000 -+ - cflags-$(CONFIG_CPU_R4000_WORKAROUNDS) += $(call cc-option,-mfix-r4000,) - cflags-$(CONFIG_CPU_R4400_WORKAROUNDS) += $(call cc-option,-mfix-r4400,) - cflags-$(CONFIG_CPU_DADDI_WORKAROUNDS) += $(call cc-option,-mno-daddi,) -@@ -174,6 +181,7 @@ - # - libs-$(CONFIG_ARC) += arch/mips/fw/arc/ - libs-$(CONFIG_CFE) += arch/mips/fw/cfe/ -+libs-$(CONFIG_MYLOADER) += arch/mips/fw/myloader/ - libs-$(CONFIG_SNIPROM) += arch/mips/fw/sni/ - libs-y += arch/mips/fw/lib/ - diff -Nur linux-2.6.39.orig/arch/mips/pci/Makefile linux-2.6.39/arch/mips/pci/Makefile --- linux-2.6.39.orig/arch/mips/pci/Makefile 2011-05-19 06:06:34.000000000 +0200 -+++ linux-2.6.39/arch/mips/pci/Makefile 2011-08-22 16:21:37.437981205 +0200 ++++ linux-2.6.39/arch/mips/pci/Makefile 2011-08-24 18:17:24.000000000 +0200 @@ -18,6 +18,7 @@ obj-$(CONFIG_BCM47XX) += pci-bcm47xx.o obj-$(CONFIG_BCM63XX) += pci-bcm63xx.o fixup-bcm63xx.o \ @@ -15159,7 +12683,7 @@ diff -Nur linux-2.6.39.orig/arch/mips/pci/Makefile linux-2.6.39/arch/mips/pci/Ma # These are still pretty much in the old state, watch, go blind. diff -Nur linux-2.6.39.orig/arch/mips/pci/pci-ar71xx.c linux-2.6.39/arch/mips/pci/pci-ar71xx.c --- linux-2.6.39.orig/arch/mips/pci/pci-ar71xx.c 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.39/arch/mips/pci/pci-ar71xx.c 2011-08-06 09:32:37.098016752 +0200 ++++ linux-2.6.39/arch/mips/pci/pci-ar71xx.c 2011-08-24 18:17:24.000000000 +0200 @@ -0,0 +1,415 @@ +/* + * Atheros AR71xx PCI host controller driver @@ -15578,7 +13102,7 @@ diff -Nur linux-2.6.39.orig/arch/mips/pci/pci-ar71xx.c linux-2.6.39/arch/mips/pc +} diff -Nur linux-2.6.39.orig/arch/mips/pci/pci-ar724x.c linux-2.6.39/arch/mips/pci/pci-ar724x.c --- linux-2.6.39.orig/arch/mips/pci/pci-ar724x.c 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.39/arch/mips/pci/pci-ar724x.c 2011-08-06 09:32:37.088017079 +0200 ++++ linux-2.6.39/arch/mips/pci/pci-ar724x.c 2011-08-24 18:17:24.000000000 +0200 @@ -0,0 +1,389 @@ +/* + * Atheros AR724x PCI host controller driver @@ -15969,9 +13493,22 @@ diff -Nur linux-2.6.39.orig/arch/mips/pci/pci-ar724x.c linux-2.6.39/arch/mips/pc +err: + return ret; +} +diff -Nur linux-2.6.39.orig/drivers/Makefile linux-2.6.39/drivers/Makefile +--- linux-2.6.39.orig/drivers/Makefile 2011-05-19 06:06:34.000000000 +0200 ++++ linux-2.6.39/drivers/Makefile 2011-08-24 18:17:24.000000000 +0200 +@@ -46,8 +46,8 @@ + obj-$(CONFIG_SCSI) += scsi/ + obj-$(CONFIG_ATA) += ata/ + obj-$(CONFIG_TARGET_CORE) += target/ +-obj-$(CONFIG_MTD) += mtd/ + obj-$(CONFIG_SPI) += spi/ ++obj-$(CONFIG_MTD) += mtd/ + obj-y += net/ + obj-$(CONFIG_ATM) += atm/ + obj-$(CONFIG_FUSION) += message/ diff -Nur linux-2.6.39.orig/drivers/gpio/nxp_74hc153.c linux-2.6.39/drivers/gpio/nxp_74hc153.c --- linux-2.6.39.orig/drivers/gpio/nxp_74hc153.c 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.39/drivers/gpio/nxp_74hc153.c 2011-04-27 12:19:22.327664626 +0200 ++++ linux-2.6.39/drivers/gpio/nxp_74hc153.c 2011-08-24 18:17:24.000000000 +0200 @@ -0,0 +1,247 @@ +/* + * NXP 74HC153 - Dual 4-input multiplexer GPIO driver @@ -16222,7 +13759,7 @@ diff -Nur linux-2.6.39.orig/drivers/gpio/nxp_74hc153.c linux-2.6.39/drivers/gpio +MODULE_ALIAS("platform:" NXP_74HC153_DRIVER_NAME); diff -Nur linux-2.6.39.orig/drivers/leds/leds-rb750.c linux-2.6.39/drivers/leds/leds-rb750.c --- linux-2.6.39.orig/drivers/leds/leds-rb750.c 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.39/drivers/leds/leds-rb750.c 2011-04-27 12:19:22.267661616 +0200 ++++ linux-2.6.39/drivers/leds/leds-rb750.c 2011-08-24 18:17:24.000000000 +0200 @@ -0,0 +1,141 @@ +/* + * LED driver for the RouterBOARD 750 @@ -16367,7 +13904,7 @@ diff -Nur linux-2.6.39.orig/drivers/leds/leds-rb750.c linux-2.6.39/drivers/leds/ +MODULE_LICENSE("GPL v2"); diff -Nur linux-2.6.39.orig/drivers/leds/leds-wndr3700-usb.c linux-2.6.39/drivers/leds/leds-wndr3700-usb.c --- linux-2.6.39.orig/drivers/leds/leds-wndr3700-usb.c 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.39/drivers/leds/leds-wndr3700-usb.c 2011-04-27 12:19:22.267661616 +0200 ++++ linux-2.6.39/drivers/leds/leds-wndr3700-usb.c 2011-08-24 18:17:24.000000000 +0200 @@ -0,0 +1,75 @@ +/* + * USB LED driver for the NETGEAR WNDR3700 @@ -16444,22 +13981,9 @@ diff -Nur linux-2.6.39.orig/drivers/leds/leds-wndr3700-usb.c linux-2.6.39/driver +MODULE_AUTHOR("Gabor Juhos <juhosg@openwrt.org>"); +MODULE_LICENSE("GPL v2"); +MODULE_ALIAS("platform:" DRIVER_NAME); -diff -Nur linux-2.6.39.orig/drivers/Makefile linux-2.6.39/drivers/Makefile ---- linux-2.6.39.orig/drivers/Makefile 2011-05-19 06:06:34.000000000 +0200 -+++ linux-2.6.39/drivers/Makefile 2011-08-23 15:10:42.370478643 +0200 -@@ -46,8 +46,8 @@ - obj-$(CONFIG_SCSI) += scsi/ - obj-$(CONFIG_ATA) += ata/ - obj-$(CONFIG_TARGET_CORE) += target/ --obj-$(CONFIG_MTD) += mtd/ - obj-$(CONFIG_SPI) += spi/ -+obj-$(CONFIG_MTD) += mtd/ - obj-y += net/ - obj-$(CONFIG_ATM) += atm/ - obj-$(CONFIG_FUSION) += message/ diff -Nur linux-2.6.39.orig/drivers/mtd/chips/cfi_cmdset_0002.c linux-2.6.39/drivers/mtd/chips/cfi_cmdset_0002.c --- linux-2.6.39.orig/drivers/mtd/chips/cfi_cmdset_0002.c 2011-05-19 06:06:34.000000000 +0200 -+++ linux-2.6.39/drivers/mtd/chips/cfi_cmdset_0002.c 2011-08-22 16:22:28.477979654 +0200 ++++ linux-2.6.39/drivers/mtd/chips/cfi_cmdset_0002.c 2011-08-24 18:17:24.000000000 +0200 @@ -39,7 +39,7 @@ #include <linux/mtd/xip.h> @@ -16519,9 +14043,37 @@ diff -Nur linux-2.6.39.orig/drivers/mtd/chips/cfi_cmdset_0002.c linux-2.6.39/dri /* +diff -Nur linux-2.6.39.orig/drivers/mtd/maps/Kconfig linux-2.6.39/drivers/mtd/maps/Kconfig +--- linux-2.6.39.orig/drivers/mtd/maps/Kconfig 2011-05-19 06:06:34.000000000 +0200 ++++ linux-2.6.39/drivers/mtd/maps/Kconfig 2011-08-24 18:17:24.000000000 +0200 +@@ -260,6 +260,13 @@ + Support for parsing CFE image tag and creating MTD partitions on + Broadcom BCM63xx boards. + ++config MTD_AR91XX_FLASH ++ tristate "Atheros AR91xx parallel flash support" ++ depends on ATHEROS_AR71XX ++ select MTD_COMPLEX_MAPPINGS ++ help ++ Parallel flash driver for the Atheros AR91xx based boards. ++ + config MTD_DILNETPC + tristate "CFI Flash device mapped on DIL/Net PC" + depends on X86 && MTD_PARTITIONS && MTD_CFI_INTELEXT && BROKEN +diff -Nur linux-2.6.39.orig/drivers/mtd/maps/Makefile linux-2.6.39/drivers/mtd/maps/Makefile +--- linux-2.6.39.orig/drivers/mtd/maps/Makefile 2011-05-19 06:06:34.000000000 +0200 ++++ linux-2.6.39/drivers/mtd/maps/Makefile 2011-08-24 18:17:24.000000000 +0200 +@@ -40,6 +40,7 @@ + obj-$(CONFIG_MTD_DBOX2) += dbox2-flash.o + obj-$(CONFIG_MTD_SOLUTIONENGINE)+= solutionengine.o + obj-$(CONFIG_MTD_PCI) += pci.o ++obj-$(CONFIG_MTD_AR91XX_FLASH) += ar91xx_flash.o + obj-$(CONFIG_MTD_AUTCPU12) += autcpu12-nvram.o + obj-$(CONFIG_MTD_EDB7312) += edb7312.o + obj-$(CONFIG_MTD_IMPA7) += impa7.o diff -Nur linux-2.6.39.orig/drivers/mtd/maps/ar91xx_flash.c linux-2.6.39/drivers/mtd/maps/ar91xx_flash.c --- linux-2.6.39.orig/drivers/mtd/maps/ar91xx_flash.c 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.39/drivers/mtd/maps/ar91xx_flash.c 2011-04-27 12:19:22.177661504 +0200 ++++ linux-2.6.39/drivers/mtd/maps/ar91xx_flash.c 2011-08-24 18:17:24.000000000 +0200 @@ -0,0 +1,310 @@ +/* + * Parallel flash driver for the Atheros AR91xx SoC @@ -16833,37 +14385,9 @@ diff -Nur linux-2.6.39.orig/drivers/mtd/maps/ar91xx_flash.c linux-2.6.39/drivers +MODULE_AUTHOR("Gabor Juhos <juhosg@openwrt.org>"); +MODULE_DESCRIPTION("Parallel flash driver for the Atheros AR91xx SoC"); +MODULE_ALIAS("platform:" DRV_NAME); -diff -Nur linux-2.6.39.orig/drivers/mtd/maps/Kconfig linux-2.6.39/drivers/mtd/maps/Kconfig ---- linux-2.6.39.orig/drivers/mtd/maps/Kconfig 2011-05-19 06:06:34.000000000 +0200 -+++ linux-2.6.39/drivers/mtd/maps/Kconfig 2011-08-22 16:22:06.367979538 +0200 -@@ -260,6 +260,13 @@ - Support for parsing CFE image tag and creating MTD partitions on - Broadcom BCM63xx boards. - -+config MTD_AR91XX_FLASH -+ tristate "Atheros AR91xx parallel flash support" -+ depends on ATHEROS_AR71XX -+ select MTD_COMPLEX_MAPPINGS -+ help -+ Parallel flash driver for the Atheros AR91xx based boards. -+ - config MTD_DILNETPC - tristate "CFI Flash device mapped on DIL/Net PC" - depends on X86 && MTD_PARTITIONS && MTD_CFI_INTELEXT && BROKEN -diff -Nur linux-2.6.39.orig/drivers/mtd/maps/Makefile linux-2.6.39/drivers/mtd/maps/Makefile ---- linux-2.6.39.orig/drivers/mtd/maps/Makefile 2011-05-19 06:06:34.000000000 +0200 -+++ linux-2.6.39/drivers/mtd/maps/Makefile 2011-08-22 16:22:06.387979567 +0200 -@@ -40,6 +40,7 @@ - obj-$(CONFIG_MTD_DBOX2) += dbox2-flash.o - obj-$(CONFIG_MTD_SOLUTIONENGINE)+= solutionengine.o - obj-$(CONFIG_MTD_PCI) += pci.o -+obj-$(CONFIG_MTD_AR91XX_FLASH) += ar91xx_flash.o - obj-$(CONFIG_MTD_AUTCPU12) += autcpu12-nvram.o - obj-$(CONFIG_MTD_EDB7312) += edb7312.o - obj-$(CONFIG_MTD_IMPA7) += impa7.o diff -Nur linux-2.6.39.orig/drivers/mtd/nand/Kconfig linux-2.6.39/drivers/mtd/nand/Kconfig --- linux-2.6.39.orig/drivers/mtd/nand/Kconfig 2011-05-19 06:06:34.000000000 +0200 -+++ linux-2.6.39/drivers/mtd/nand/Kconfig 2011-08-23 14:22:33.407989933 +0200 ++++ linux-2.6.39/drivers/mtd/nand/Kconfig 2011-08-24 18:17:24.000000000 +0200 @@ -531,4 +531,9 @@ Enables support for NAND Flash chips on the ST Microelectronics Flexible Static Memory Controller (FSMC) @@ -16876,7 +14400,7 @@ diff -Nur linux-2.6.39.orig/drivers/mtd/nand/Kconfig linux-2.6.39/drivers/mtd/na endif # MTD_NAND diff -Nur linux-2.6.39.orig/drivers/mtd/nand/Makefile linux-2.6.39/drivers/mtd/nand/Makefile --- linux-2.6.39.orig/drivers/mtd/nand/Makefile 2011-05-19 06:06:34.000000000 +0200 -+++ linux-2.6.39/drivers/mtd/nand/Makefile 2011-08-22 16:22:41.217981942 +0200 ++++ linux-2.6.39/drivers/mtd/nand/Makefile 2011-08-24 18:17:24.000000000 +0200 @@ -34,6 +34,7 @@ obj-$(CONFIG_MTD_NAND_PXA3xx) += pxa3xx_nand.o obj-$(CONFIG_MTD_NAND_TMIO) += tmio_nand.o @@ -16887,7 +14411,7 @@ diff -Nur linux-2.6.39.orig/drivers/mtd/nand/Makefile linux-2.6.39/drivers/mtd/n obj-$(CONFIG_MTD_NAND_ORION) += orion_nand.o diff -Nur linux-2.6.39.orig/drivers/mtd/nand/rb4xx_nand.c linux-2.6.39/drivers/mtd/nand/rb4xx_nand.c --- linux-2.6.39.orig/drivers/mtd/nand/rb4xx_nand.c 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.39/drivers/mtd/nand/rb4xx_nand.c 2011-08-23 11:36:58.637983055 +0200 ++++ linux-2.6.39/drivers/mtd/nand/rb4xx_nand.c 2011-08-24 18:17:24.000000000 +0200 @@ -0,0 +1,311 @@ +/* + * NAND flash driver for the MikroTik RouterBoard 4xx series @@ -17202,7 +14726,7 @@ diff -Nur linux-2.6.39.orig/drivers/mtd/nand/rb4xx_nand.c linux-2.6.39/drivers/m +MODULE_LICENSE("GPL v2"); diff -Nur linux-2.6.39.orig/drivers/mtd/nand/rb750_nand.c linux-2.6.39/drivers/mtd/nand/rb750_nand.c --- linux-2.6.39.orig/drivers/mtd/nand/rb750_nand.c 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.39/drivers/mtd/nand/rb750_nand.c 2011-04-27 12:19:22.177661504 +0200 ++++ linux-2.6.39/drivers/mtd/nand/rb750_nand.c 2011-08-24 18:17:24.000000000 +0200 @@ -0,0 +1,361 @@ +/* + * NAND flash driver for the MikroTik RouterBOARD 750 @@ -17567,7 +15091,7 @@ diff -Nur linux-2.6.39.orig/drivers/mtd/nand/rb750_nand.c linux-2.6.39/drivers/m +MODULE_LICENSE("GPL v2"); diff -Nur linux-2.6.39.orig/drivers/mtd/wrt160nl_part.c linux-2.6.39/drivers/mtd/wrt160nl_part.c --- linux-2.6.39.orig/drivers/mtd/wrt160nl_part.c 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.39/drivers/mtd/wrt160nl_part.c 2011-08-06 09:32:37.138017083 +0200 ++++ linux-2.6.39/drivers/mtd/wrt160nl_part.c 2011-08-24 18:17:24.000000000 +0200 @@ -0,0 +1,190 @@ +/* + * Copyright (C) 2009 Christian Daniel <cd@maintech.de> @@ -17759,9 +15283,610 @@ diff -Nur linux-2.6.39.orig/drivers/mtd/wrt160nl_part.c linux-2.6.39/drivers/mtd + +MODULE_LICENSE("GPL"); +MODULE_AUTHOR("Christian Daniel <cd@maintech.de>"); +diff -Nur linux-2.6.39.orig/drivers/net/Kconfig linux-2.6.39/drivers/net/Kconfig +--- linux-2.6.39.orig/drivers/net/Kconfig 2011-05-19 06:06:34.000000000 +0200 ++++ linux-2.6.39/drivers/net/Kconfig 2011-08-24 18:17:24.000000000 +0200 +@@ -2071,6 +2071,8 @@ + + The safe and default value for this is N. + ++source drivers/net/ag71xx/Kconfig ++ + config DL2K + tristate "DL2000/TC902x-based Gigabit Ethernet support" + depends on PCI +diff -Nur linux-2.6.39.orig/drivers/net/Makefile linux-2.6.39/drivers/net/Makefile +--- linux-2.6.39.orig/drivers/net/Makefile 2011-05-19 06:06:34.000000000 +0200 ++++ linux-2.6.39/drivers/net/Makefile 2011-08-24 18:17:24.000000000 +0200 +@@ -112,6 +112,7 @@ + # end link order section + # + ++obj-$(CONFIG_AG71XX) += ag71xx/ + obj-$(CONFIG_SUNDANCE) += sundance.o + obj-$(CONFIG_HAMACHI) += hamachi.o + obj-$(CONFIG_NET) += Space.o loopback.o +diff -Nur linux-2.6.39.orig/drivers/net/ag71xx/Kconfig linux-2.6.39/drivers/net/ag71xx/Kconfig +--- linux-2.6.39.orig/drivers/net/ag71xx/Kconfig 1970-01-01 01:00:00.000000000 +0100 ++++ linux-2.6.39/drivers/net/ag71xx/Kconfig 2011-08-24 18:17:24.000000000 +0200 +@@ -0,0 +1,33 @@ ++config AG71XX ++ tristate "Atheros AR71xx built-in ethernet mac support" ++ depends on ATHEROS_AR71XX ++ select PHYLIB ++ help ++ If you wish to compile a kernel for AR71xx/91xx and enable ++ ethernet support, then you should always answer Y to this. ++ ++if AG71XX ++ ++config AG71XX_DEBUG ++ bool "Atheros AR71xx built-in ethernet driver debugging" ++ default n ++ help ++ Atheros AR71xx built-in ethernet driver debugging messages. ++ ++config AG71XX_DEBUG_FS ++ bool "Atheros AR71xx built-in ethernet driver debugfs support" ++ depends on DEBUG_FS ++ default n ++ help ++ Say Y, if you need access to various statistics provided by ++ the ag71xx driver. ++ ++config AG71XX_AR8216_SUPPORT ++ bool "special support for the Atheros AR8216 switch" ++ default n ++ default y if AR71XX_MACH_WNR2000 || AR71XX_MACH_MZK_W04NU ++ help ++ Say 'y' here if you want to enable special support for the ++ Atheros AR8216 switch found on some boards. ++ ++endif +diff -Nur linux-2.6.39.orig/drivers/net/ag71xx/Makefile linux-2.6.39/drivers/net/ag71xx/Makefile +--- linux-2.6.39.orig/drivers/net/ag71xx/Makefile 1970-01-01 01:00:00.000000000 +0100 ++++ linux-2.6.39/drivers/net/ag71xx/Makefile 2011-08-24 18:17:24.000000000 +0200 +@@ -0,0 +1,15 @@ ++# ++# Makefile for the Atheros AR71xx built-in ethernet macs ++# ++ ++ag71xx-y += ag71xx_main.o ++ag71xx-y += ag71xx_ethtool.o ++ag71xx-y += ag71xx_phy.o ++ag71xx-y += ag71xx_mdio.o ++ag71xx-y += ag71xx_ar7240.o ++ ++ag71xx-$(CONFIG_AG71XX_DEBUG_FS) += ag71xx_debugfs.o ++ag71xx-$(CONFIG_AG71XX_AR8216_SUPPORT) += ag71xx_ar8216.o ++ ++obj-$(CONFIG_AG71XX) += ag71xx.o ++ +diff -Nur linux-2.6.39.orig/drivers/net/ag71xx/ag71xx.h linux-2.6.39/drivers/net/ag71xx/ag71xx.h +--- linux-2.6.39.orig/drivers/net/ag71xx/ag71xx.h 1970-01-01 01:00:00.000000000 +0100 ++++ linux-2.6.39/drivers/net/ag71xx/ag71xx.h 2011-08-24 18:17:24.000000000 +0200 +@@ -0,0 +1,518 @@ ++/* ++ * Atheros AR71xx built-in ethernet mac driver ++ * ++ * Copyright (C) 2008-2010 Gabor Juhos <juhosg@openwrt.org> ++ * Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org> ++ * ++ * Based on Atheros' AG7100 driver ++ * ++ * This program is free software; you can redistribute it and/or modify it ++ * under the terms of the GNU General Public License version 2 as published ++ * by the Free Software Foundation. ++ */ ++ ++#ifndef __AG71XX_H ++#define __AG71XX_H ++ ++#include <linux/kernel.h> ++#include <linux/version.h> ++#include <linux/module.h> ++#include <linux/init.h> ++#include <linux/types.h> ++#include <linux/random.h> ++#include <linux/spinlock.h> ++#include <linux/interrupt.h> ++#include <linux/platform_device.h> ++#include <linux/ethtool.h> ++#include <linux/etherdevice.h> ++#include <linux/if_vlan.h> ++#include <linux/phy.h> ++#include <linux/skbuff.h> ++#include <linux/dma-mapping.h> ++#include <linux/workqueue.h> ++ ++#include <linux/bitops.h> ++ ++#include <asm/mach-ar71xx/ar71xx.h> ++#include <asm/mach-ar71xx/platform.h> ++ ++#define AG71XX_DRV_NAME "ag71xx" ++#define AG71XX_DRV_VERSION "0.5.35" ++ ++#define AG71XX_NAPI_WEIGHT 64 ++#define AG71XX_OOM_REFILL (1 + HZ/10) ++ ++#define AG71XX_INT_ERR (AG71XX_INT_RX_BE | AG71XX_INT_TX_BE) ++#define AG71XX_INT_TX (AG71XX_INT_TX_PS) ++#define AG71XX_INT_RX (AG71XX_INT_RX_PR | AG71XX_INT_RX_OF) ++ ++#define AG71XX_INT_POLL (AG71XX_INT_RX | AG71XX_INT_TX) ++#define AG71XX_INT_INIT (AG71XX_INT_ERR | AG71XX_INT_POLL) ++ ++#define AG71XX_TX_MTU_LEN 1540 ++#define AG71XX_RX_PKT_RESERVE 64 ++#define AG71XX_RX_PKT_SIZE \ ++ (AG71XX_RX_PKT_RESERVE + ETH_FRAME_LEN + ETH_FCS_LEN + VLAN_HLEN) ++ ++#define AG71XX_TX_RING_SIZE_DEFAULT 64 ++#define AG71XX_RX_RING_SIZE_DEFAULT 128 ++ ++#define AG71XX_TX_RING_SIZE_MAX 256 ++#define AG71XX_RX_RING_SIZE_MAX 256 ++ ++#ifdef CONFIG_AG71XX_DEBUG ++#define DBG(fmt, args...) printk(KERN_DEBUG fmt, ## args) ++#else ++#define DBG(fmt, args...) do {} while (0) ++#endif ++ ++#define ag71xx_assert(_cond) \ ++do { \ ++ if (_cond) \ ++ break; \ ++ printk("%s,%d: assertion failed\n", __FILE__, __LINE__); \ ++ BUG(); \ ++} while (0) ++ ++struct ag71xx_desc { ++ u32 data; ++ u32 ctrl; ++#define DESC_EMPTY BIT(31) ++#define DESC_MORE BIT(24) ++#define DESC_PKTLEN_M 0xfff ++ u32 next; ++ u32 pad; ++} __attribute__((aligned(4))); ++ ++struct ag71xx_buf { ++ struct sk_buff *skb; ++ struct ag71xx_desc *desc; ++ dma_addr_t dma_addr; ++ unsigned long timestamp; ++}; ++ ++struct ag71xx_ring { ++ struct ag71xx_buf *buf; ++ u8 *descs_cpu; ++ dma_addr_t descs_dma; ++ unsigned int desc_size; ++ unsigned int curr; ++ unsigned int dirty; ++ unsigned int size; ++}; ++ ++struct ag71xx_mdio { ++ struct mii_bus *mii_bus; ++ int mii_irq[PHY_MAX_ADDR]; ++ void __iomem *mdio_base; ++ struct ag71xx_mdio_platform_data *pdata; ++}; ++ ++struct ag71xx_int_stats { ++ unsigned long rx_pr; ++ unsigned long rx_be; ++ unsigned long rx_of; ++ unsigned long tx_ps; ++ unsigned long tx_be; ++ unsigned long tx_ur; ++ unsigned long total; ++}; ++ ++struct ag71xx_napi_stats { ++ unsigned long napi_calls; ++ unsigned long rx_count; ++ unsigned long rx_packets; ++ unsigned long rx_packets_max; ++ unsigned long tx_count; ++ unsigned long tx_packets; ++ unsigned long tx_packets_max; ++ ++ unsigned long rx[AG71XX_NAPI_WEIGHT + 1]; ++ unsigned long tx[AG71XX_NAPI_WEIGHT + 1]; ++}; ++ ++struct ag71xx_debug { ++ struct dentry *debugfs_dir; ++ ++ struct ag71xx_int_stats int_stats; ++ struct ag71xx_napi_stats napi_stats; ++}; ++ ++struct ag71xx { ++ void __iomem *mac_base; ++ void __iomem *mii_ctrl; ++ ++ spinlock_t lock; ++ struct platform_device *pdev; ++ struct net_device *dev; ++ struct napi_struct napi; ++ u32 msg_enable; ++ ++ struct ag71xx_desc *stop_desc; ++ dma_addr_t stop_desc_dma; ++ ++ struct ag71xx_ring rx_ring; ++ struct ag71xx_ring tx_ring; ++ ++ struct mii_bus *mii_bus; ++ struct phy_device *phy_dev; ++ void *phy_priv; ++ ++ unsigned int link; ++ unsigned int speed; ++ int duplex; ++ ++ struct work_struct restart_work; ++ struct delayed_work link_work; ++ struct timer_list oom_timer; ++ ++#ifdef CONFIG_AG71XX_DEBUG_FS ++ struct ag71xx_debug debug; ++#endif ++}; ++ ++extern struct ethtool_ops ag71xx_ethtool_ops; ++void ag71xx_link_adjust(struct ag71xx *ag); ++ ++int ag71xx_mdio_driver_init(void) __init; ++void ag71xx_mdio_driver_exit(void); ++ ++int ag71xx_phy_connect(struct ag71xx *ag); ++void ag71xx_phy_disconnect(struct ag71xx *ag); ++void ag71xx_phy_start(struct ag71xx *ag); ++void ag71xx_phy_stop(struct ag71xx *ag); ++ ++static inline struct ag71xx_platform_data *ag71xx_get_pdata(struct ag71xx *ag) ++{ ++ return ag->pdev->dev.platform_data; ++} ++ ++static inline int ag71xx_desc_empty(struct ag71xx_desc *desc) ++{ ++ return (desc->ctrl & DESC_EMPTY) != 0; ++} ++ ++static inline int ag71xx_desc_pktlen(struct ag71xx_desc *desc) ++{ ++ return desc->ctrl & DESC_PKTLEN_M; ++} ++ ++/* Register offsets */ ++#define AG71XX_REG_MAC_CFG1 0x0000 ++#define AG71XX_REG_MAC_CFG2 0x0004 ++#define AG71XX_REG_MAC_IPG 0x0008 ++#define AG71XX_REG_MAC_HDX 0x000c ++#define AG71XX_REG_MAC_MFL 0x0010 ++#define AG71XX_REG_MII_CFG 0x0020 ++#define AG71XX_REG_MII_CMD 0x0024 ++#define AG71XX_REG_MII_ADDR 0x0028 ++#define AG71XX_REG_MII_CTRL 0x002c ++#define AG71XX_REG_MII_STATUS 0x0030 ++#define AG71XX_REG_MII_IND 0x0034 ++#define AG71XX_REG_MAC_IFCTL 0x0038 ++#define AG71XX_REG_MAC_ADDR1 0x0040 ++#define AG71XX_REG_MAC_ADDR2 0x0044 ++#define AG71XX_REG_FIFO_CFG0 0x0048 ++#define AG71XX_REG_FIFO_CFG1 0x004c ++#define AG71XX_REG_FIFO_CFG2 0x0050 ++#define AG71XX_REG_FIFO_CFG3 0x0054 ++#define AG71XX_REG_FIFO_CFG4 0x0058 ++#define AG71XX_REG_FIFO_CFG5 0x005c ++#define AG71XX_REG_FIFO_RAM0 0x0060 ++#define AG71XX_REG_FIFO_RAM1 0x0064 ++#define AG71XX_REG_FIFO_RAM2 0x0068 ++#define AG71XX_REG_FIFO_RAM3 0x006c ++#define AG71XX_REG_FIFO_RAM4 0x0070 ++#define AG71XX_REG_FIFO_RAM5 0x0074 ++#define AG71XX_REG_FIFO_RAM6 0x0078 ++#define AG71XX_REG_FIFO_RAM7 0x007c ++ ++#define AG71XX_REG_TX_CTRL 0x0180 ++#define AG71XX_REG_TX_DESC 0x0184 ++#define AG71XX_REG_TX_STATUS 0x0188 ++#define AG71XX_REG_RX_CTRL 0x018c ++#define AG71XX_REG_RX_DESC 0x0190 ++#define AG71XX_REG_RX_STATUS 0x0194 ++#define AG71XX_REG_INT_ENABLE 0x0198 ++#define AG71XX_REG_INT_STATUS 0x019c ++ ++#define AG71XX_REG_FIFO_DEPTH 0x01a8 ++#define AG71XX_REG_RX_SM 0x01b0 ++#define AG71XX_REG_TX_SM 0x01b4 ++ ++#define MAC_CFG1_TXE BIT(0) /* Tx Enable */ ++#define MAC_CFG1_STX BIT(1) /* Synchronize Tx Enable */ ++#define MAC_CFG1_RXE BIT(2) /* Rx Enable */ ++#define MAC_CFG1_SRX BIT(3) /* Synchronize Rx Enable */ ++#define MAC_CFG1_TFC BIT(4) /* Tx Flow Control Enable */ ++#define MAC_CFG1_RFC BIT(5) /* Rx Flow Control Enable */ ++#define MAC_CFG1_LB BIT(8) /* Loopback mode */ ++#define MAC_CFG1_SR BIT(31) /* Soft Reset */ ++ ++#define MAC_CFG2_FDX BIT(0) ++#define MAC_CFG2_CRC_EN BIT(1) ++#define MAC_CFG2_PAD_CRC_EN BIT(2) ++#define MAC_CFG2_LEN_CHECK BIT(4) ++#define MAC_CFG2_HUGE_FRAME_EN BIT(5) ++#define MAC_CFG2_IF_1000 BIT(9) ++#define MAC_CFG2_IF_10_100 BIT(8) ++ ++#define FIFO_CFG0_WTM BIT(0) /* Watermark Module */ ++#define FIFO_CFG0_RXS BIT(1) /* Rx System Module */ ++#define FIFO_CFG0_RXF BIT(2) /* Rx Fabric Module */ ++#define FIFO_CFG0_TXS BIT(3) /* Tx System Module */ ++#define FIFO_CFG0_TXF BIT(4) /* Tx Fabric Module */ ++#define FIFO_CFG0_ALL (FIFO_CFG0_WTM | FIFO_CFG0_RXS | FIFO_CFG0_RXF \ ++ | FIFO_CFG0_TXS | FIFO_CFG0_TXF) ++ ++#define FIFO_CFG0_ENABLE_SHIFT 8 ++ ++#define FIFO_CFG4_DE BIT(0) /* Drop Event */ ++#define FIFO_CFG4_DV BIT(1) /* RX_DV Event */ ++#define FIFO_CFG4_FC BIT(2) /* False Carrier */ ++#define FIFO_CFG4_CE BIT(3) /* Code Error */ ++#define FIFO_CFG4_CR BIT(4) /* CRC error */ ++#define FIFO_CFG4_LM BIT(5) /* Length Mismatch */ ++#define FIFO_CFG4_LO BIT(6) /* Length out of range */ ++#define FIFO_CFG4_OK BIT(7) /* Packet is OK */ ++#define FIFO_CFG4_MC BIT(8) /* Multicast Packet */ ++#define FIFO_CFG4_BC BIT(9) /* Broadcast Packet */ ++#define FIFO_CFG4_DR BIT(10) /* Dribble */ ++#define FIFO_CFG4_LE BIT(11) /* Long Event */ ++#define FIFO_CFG4_CF BIT(12) /* Control Frame */ ++#define FIFO_CFG4_PF BIT(13) /* Pause Frame */ ++#define FIFO_CFG4_UO BIT(14) /* Unsupported Opcode */ ++#define FIFO_CFG4_VT BIT(15) /* VLAN tag detected */ ++#define FIFO_CFG4_FT BIT(16) /* Frame Truncated */ ++#define FIFO_CFG4_UC BIT(17) /* Unicast Packet */ ++ ++#define FIFO_CFG5_DE BIT(0) /* Drop Event */ ++#define FIFO_CFG5_DV BIT(1) /* RX_DV Event */ ++#define FIFO_CFG5_FC BIT(2) /* False Carrier */ ++#define FIFO_CFG5_CE BIT(3) /* Code Error */ ++#define FIFO_CFG5_LM BIT(4) /* Length Mismatch */ ++#define FIFO_CFG5_LO BIT(5) /* Length Out of Range */ ++#define FIFO_CFG5_OK BIT(6) /* Packet is OK */ ++#define FIFO_CFG5_MC BIT(7) /* Multicast Packet */ ++#define FIFO_CFG5_BC BIT(8) /* Broadcast Packet */ ++#define FIFO_CFG5_DR BIT(9) /* Dribble */ ++#define FIFO_CFG5_CF BIT(10) /* Control Frame */ ++#define FIFO_CFG5_PF BIT(11) /* Pause Frame */ ++#define FIFO_CFG5_UO BIT(12) /* Unsupported Opcode */ ++#define FIFO_CFG5_VT BIT(13) /* VLAN tag detected */ ++#define FIFO_CFG5_LE BIT(14) /* Long Event */ ++#define FIFO_CFG5_FT BIT(15) /* Frame Truncated */ ++#define FIFO_CFG5_16 BIT(16) /* unknown */ ++#define FIFO_CFG5_17 BIT(17) /* unknown */ ++#define FIFO_CFG5_SF BIT(18) /* Short Frame */ ++#define FIFO_CFG5_BM BIT(19) /* Byte Mode */ ++ ++#define AG71XX_INT_TX_PS BIT(0) ++#define AG71XX_INT_TX_UR BIT(1) ++#define AG71XX_INT_TX_BE BIT(3) ++#define AG71XX_INT_RX_PR BIT(4) ++#define AG71XX_INT_RX_OF BIT(6) ++#define AG71XX_INT_RX_BE BIT(7) ++ ++#define MAC_IFCTL_SPEED BIT(16) ++ ++#define MII_CFG_CLK_DIV_4 0 ++#define MII_CFG_CLK_DIV_6 2 ++#define MII_CFG_CLK_DIV_8 3 ++#define MII_CFG_CLK_DIV_10 4 ++#define MII_CFG_CLK_DIV_14 5 ++#define MII_CFG_CLK_DIV_20 6 ++#define MII_CFG_CLK_DIV_28 7 ++#define MII_CFG_RESET BIT(31) ++ ++#define MII_CMD_WRITE 0x0 ++#define MII_CMD_READ 0x1 ++#define MII_ADDR_SHIFT 8 ++#define MII_IND_BUSY BIT(0) ++#define MII_IND_INVALID BIT(2) ++ ++#define TX_CTRL_TXE BIT(0) /* Tx Enable */ ++ ++#define TX_STATUS_PS BIT(0) /* Packet Sent */ ++#define TX_STATUS_UR BIT(1) /* Tx Underrun */ ++#define TX_STATUS_BE BIT(3) /* Bus Error */ ++ ++#define RX_CTRL_RXE BIT(0) /* Rx Enable */ ++ ++#define RX_STATUS_PR BIT(0) /* Packet Received */ ++#define RX_STATUS_OF BIT(2) /* Rx Overflow */ ++#define RX_STATUS_BE BIT(3) /* Bus Error */ ++ ++#define MII_CTRL_IF_MASK 3 ++#define MII_CTRL_SPEED_SHIFT 4 ++#define MII_CTRL_SPEED_MASK 3 ++#define MII_CTRL_SPEED_10 0 ++#define MII_CTRL_SPEED_100 1 ++#define MII_CTRL_SPEED_1000 2 ++ ++static inline void ag71xx_check_reg_offset(struct ag71xx *ag, unsigned reg) ++{ ++ switch (reg) { ++ case AG71XX_REG_MAC_CFG1 ... AG71XX_REG_MAC_MFL: ++ case AG71XX_REG_MAC_IFCTL ... AG71XX_REG_INT_STATUS: ++ case AG71XX_REG_MII_CFG: ++ break; ++ ++ default: ++ BUG(); ++ } ++} ++ ++static inline void ag71xx_wr(struct ag71xx *ag, unsigned reg, u32 value) ++{ ++ ag71xx_check_reg_offset(ag, reg); ++ ++ __raw_writel(value, ag->mac_base + reg); ++ /* flush write */ ++ (void) __raw_readl(ag->mac_base + reg); ++} ++ ++static inline u32 ag71xx_rr(struct ag71xx *ag, unsigned reg) ++{ ++ ag71xx_check_reg_offset(ag, reg); ++ ++ return __raw_readl(ag->mac_base + reg); ++} ++ ++static inline void ag71xx_sb(struct ag71xx *ag, unsigned reg, u32 mask) ++{ ++ void __iomem *r; ++ ++ ag71xx_check_reg_offset(ag, reg); ++ ++ r = ag->mac_base + reg; ++ __raw_writel(__raw_readl(r) | mask, r); ++ /* flush write */ ++ (void)__raw_readl(r); ++} ++ ++static inline void ag71xx_cb(struct ag71xx *ag, unsigned reg, u32 mask) ++{ ++ void __iomem *r; ++ ++ ag71xx_check_reg_offset(ag, reg); ++ ++ r = ag->mac_base + reg; ++ __raw_writel(__raw_readl(r) & ~mask, r); ++ /* flush write */ ++ (void) __raw_readl(r); ++} ++ ++static inline void ag71xx_int_enable(struct ag71xx *ag, u32 ints) ++{ ++ ag71xx_sb(ag, AG71XX_REG_INT_ENABLE, ints); ++} ++ ++static inline void ag71xx_int_disable(struct ag71xx *ag, u32 ints) ++{ ++ ag71xx_cb(ag, AG71XX_REG_INT_ENABLE, ints); ++} ++ ++static inline void ag71xx_mii_ctrl_wr(struct ag71xx *ag, u32 value) ++{ ++ struct ag71xx_platform_data *pdata = ag71xx_get_pdata(ag); ++ ++ if (pdata->is_ar724x) ++ return; ++ ++ __raw_writel(value, ag->mii_ctrl); ++ ++ /* flush write */ ++ __raw_readl(ag->mii_ctrl); ++} ++ ++static inline u32 ag71xx_mii_ctrl_rr(struct ag71xx *ag) ++{ ++ struct ag71xx_platform_data *pdata = ag71xx_get_pdata(ag); ++ ++ if (pdata->is_ar724x) ++ return 0xffffffff; ++ ++ return __raw_readl(ag->mii_ctrl); ++} ++ ++static inline void ag71xx_mii_ctrl_set_if(struct ag71xx *ag, ++ unsigned int mii_if) ++{ ++ u32 t; ++ ++ t = ag71xx_mii_ctrl_rr(ag); ++ t &= ~(MII_CTRL_IF_MASK); ++ t |= (mii_if & MII_CTRL_IF_MASK); ++ ag71xx_mii_ctrl_wr(ag, t); ++} ++ ++static inline void ag71xx_mii_ctrl_set_speed(struct ag71xx *ag, ++ unsigned int speed) ++{ ++ u32 t; ++ ++ t = ag71xx_mii_ctrl_rr(ag); ++ t &= ~(MII_CTRL_SPEED_MASK << MII_CTRL_SPEED_SHIFT); ++ t |= (speed & MII_CTRL_SPEED_MASK) << MII_CTRL_SPEED_SHIFT; ++ ag71xx_mii_ctrl_wr(ag, t); ++} ++ ++#ifdef CONFIG_AG71XX_AR8216_SUPPORT ++void ag71xx_add_ar8216_header(struct ag71xx *ag, struct sk_buff *skb); ++int ag71xx_remove_ar8216_header(struct ag71xx *ag, struct sk_buff *skb, ++ int pktlen); ++static inline int ag71xx_has_ar8216(struct ag71xx *ag) ++{ ++ return ag71xx_get_pdata(ag)->has_ar8216; ++} ++#else ++static inline void ag71xx_add_ar8216_header(struct ag71xx *ag, ++ struct sk_buff *skb) ++{ ++} ++ ++static inline int ag71xx_remove_ar8216_header(struct ag71xx *ag, ++ struct sk_buff *skb, ++ int pktlen) ++{ ++ return 0; ++} ++static inline int ag71xx_has_ar8216(struct ag71xx *ag) ++{ ++ return 0; ++} ++#endif ++ ++#ifdef CONFIG_AG71XX_DEBUG_FS ++int ag71xx_debugfs_root_init(void); ++void ag71xx_debugfs_root_exit(void); ++int ag71xx_debugfs_init(struct ag71xx *ag); ++void ag71xx_debugfs_exit(struct ag71xx *ag); ++void ag71xx_debugfs_update_int_stats(struct ag71xx *ag, u32 status); ++void ag71xx_debugfs_update_napi_stats(struct ag71xx *ag, int rx, int tx); ++#else ++static inline int ag71xx_debugfs_root_init(void) { return 0; } ++static inline void ag71xx_debugfs_root_exit(void) {} ++static inline int ag71xx_debugfs_init(struct ag71xx *ag) { return 0; } ++static inline void ag71xx_debugfs_exit(struct ag71xx *ag) {} ++static inline void ag71xx_debugfs_update_int_stats(struct ag71xx *ag, ++ u32 status) {} ++static inline void ag71xx_debugfs_update_napi_stats(struct ag71xx *ag, ++ int rx, int tx) {} ++#endif /* CONFIG_AG71XX_DEBUG_FS */ ++ ++void ag71xx_ar7240_start(struct ag71xx *ag); ++void ag71xx_ar7240_stop(struct ag71xx *ag); ++int ag71xx_ar7240_init(struct ag71xx *ag); ++void ag71xx_ar7240_cleanup(struct ag71xx *ag); ++ ++int ag71xx_mdio_mii_read(struct ag71xx_mdio *am, int addr, int reg); ++void ag71xx_mdio_mii_write(struct ag71xx_mdio *am, int addr, int reg, u16 val); ++ ++u16 ar7240sw_phy_read(struct mii_bus *mii, unsigned phy_addr, ++ unsigned reg_addr); ++int ar7240sw_phy_write(struct mii_bus *mii, unsigned phy_addr, ++ unsigned reg_addr, u16 reg_val); ++ ++#endif /* _AG71XX_H */ diff -Nur linux-2.6.39.orig/drivers/net/ag71xx/ag71xx_ar7240.c linux-2.6.39/drivers/net/ag71xx/ag71xx_ar7240.c --- linux-2.6.39.orig/drivers/net/ag71xx/ag71xx_ar7240.c 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.39/drivers/net/ag71xx/ag71xx_ar7240.c 2011-08-06 09:32:37.298018216 +0200 ++++ linux-2.6.39/drivers/net/ag71xx/ag71xx_ar7240.c 2011-08-24 18:17:24.000000000 +0200 @@ -0,0 +1,913 @@ +/* + * Driver for the built-in ethernet switch of the Atheros AR7240 SoC @@ -18678,7 +16803,7 @@ diff -Nur linux-2.6.39.orig/drivers/net/ag71xx/ag71xx_ar7240.c linux-2.6.39/driv +} diff -Nur linux-2.6.39.orig/drivers/net/ag71xx/ag71xx_ar8216.c linux-2.6.39/drivers/net/ag71xx/ag71xx_ar8216.c --- linux-2.6.39.orig/drivers/net/ag71xx/ag71xx_ar8216.c 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.39/drivers/net/ag71xx/ag71xx_ar8216.c 2011-04-27 12:19:22.257663952 +0200 ++++ linux-2.6.39/drivers/net/ag71xx/ag71xx_ar8216.c 2011-08-24 18:17:24.000000000 +0200 @@ -0,0 +1,44 @@ +/* + * Atheros AR71xx built-in ethernet mac driver @@ -18726,7 +16851,7 @@ diff -Nur linux-2.6.39.orig/drivers/net/ag71xx/ag71xx_ar8216.c linux-2.6.39/driv +} diff -Nur linux-2.6.39.orig/drivers/net/ag71xx/ag71xx_debugfs.c linux-2.6.39/drivers/net/ag71xx/ag71xx_debugfs.c --- linux-2.6.39.orig/drivers/net/ag71xx/ag71xx_debugfs.c 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.39/drivers/net/ag71xx/ag71xx_debugfs.c 2011-08-06 09:32:37.298018216 +0200 ++++ linux-2.6.39/drivers/net/ag71xx/ag71xx_debugfs.c 2011-08-24 18:17:24.000000000 +0200 @@ -0,0 +1,280 @@ +/* + * Atheros AR71xx built-in ethernet mac driver @@ -19010,7 +17135,7 @@ diff -Nur linux-2.6.39.orig/drivers/net/ag71xx/ag71xx_debugfs.c linux-2.6.39/dri +} diff -Nur linux-2.6.39.orig/drivers/net/ag71xx/ag71xx_ethtool.c linux-2.6.39/drivers/net/ag71xx/ag71xx_ethtool.c --- linux-2.6.39.orig/drivers/net/ag71xx/ag71xx_ethtool.c 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.39/drivers/net/ag71xx/ag71xx_ethtool.c 2011-08-06 09:32:37.308017908 +0200 ++++ linux-2.6.39/drivers/net/ag71xx/ag71xx_ethtool.c 2011-08-24 18:17:24.000000000 +0200 @@ -0,0 +1,124 @@ +/* + * Atheros AR71xx built-in ethernet mac driver @@ -19136,531 +17261,9 @@ diff -Nur linux-2.6.39.orig/drivers/net/ag71xx/ag71xx_ethtool.c linux-2.6.39/dri + .set_ringparam = ag71xx_ethtool_set_ringparam, + .get_link = ethtool_op_get_link, +}; -diff -Nur linux-2.6.39.orig/drivers/net/ag71xx/ag71xx.h linux-2.6.39/drivers/net/ag71xx/ag71xx.h ---- linux-2.6.39.orig/drivers/net/ag71xx/ag71xx.h 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.39/drivers/net/ag71xx/ag71xx.h 2011-08-22 07:40:12.160480642 +0200 -@@ -0,0 +1,518 @@ -+/* -+ * Atheros AR71xx built-in ethernet mac driver -+ * -+ * Copyright (C) 2008-2010 Gabor Juhos <juhosg@openwrt.org> -+ * Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org> -+ * -+ * Based on Atheros' AG7100 driver -+ * -+ * This program is free software; you can redistribute it and/or modify it -+ * under the terms of the GNU General Public License version 2 as published -+ * by the Free Software Foundation. -+ */ -+ -+#ifndef __AG71XX_H -+#define __AG71XX_H -+ -+#include <linux/kernel.h> -+#include <linux/version.h> -+#include <linux/module.h> -+#include <linux/init.h> -+#include <linux/types.h> -+#include <linux/random.h> -+#include <linux/spinlock.h> -+#include <linux/interrupt.h> -+#include <linux/platform_device.h> -+#include <linux/ethtool.h> -+#include <linux/etherdevice.h> -+#include <linux/if_vlan.h> -+#include <linux/phy.h> -+#include <linux/skbuff.h> -+#include <linux/dma-mapping.h> -+#include <linux/workqueue.h> -+ -+#include <linux/bitops.h> -+ -+#include <asm/mach-ar71xx/ar71xx.h> -+#include <asm/mach-ar71xx/platform.h> -+ -+#define AG71XX_DRV_NAME "ag71xx" -+#define AG71XX_DRV_VERSION "0.5.35" -+ -+#define AG71XX_NAPI_WEIGHT 64 -+#define AG71XX_OOM_REFILL (1 + HZ/10) -+ -+#define AG71XX_INT_ERR (AG71XX_INT_RX_BE | AG71XX_INT_TX_BE) -+#define AG71XX_INT_TX (AG71XX_INT_TX_PS) -+#define AG71XX_INT_RX (AG71XX_INT_RX_PR | AG71XX_INT_RX_OF) -+ -+#define AG71XX_INT_POLL (AG71XX_INT_RX | AG71XX_INT_TX) -+#define AG71XX_INT_INIT (AG71XX_INT_ERR | AG71XX_INT_POLL) -+ -+#define AG71XX_TX_MTU_LEN 1540 -+#define AG71XX_RX_PKT_RESERVE 64 -+#define AG71XX_RX_PKT_SIZE \ -+ (AG71XX_RX_PKT_RESERVE + ETH_FRAME_LEN + ETH_FCS_LEN + VLAN_HLEN) -+ -+#define AG71XX_TX_RING_SIZE_DEFAULT 64 -+#define AG71XX_RX_RING_SIZE_DEFAULT 128 -+ -+#define AG71XX_TX_RING_SIZE_MAX 256 -+#define AG71XX_RX_RING_SIZE_MAX 256 -+ -+#ifdef CONFIG_AG71XX_DEBUG -+#define DBG(fmt, args...) printk(KERN_DEBUG fmt, ## args) -+#else -+#define DBG(fmt, args...) do {} while (0) -+#endif -+ -+#define ag71xx_assert(_cond) \ -+do { \ -+ if (_cond) \ -+ break; \ -+ printk("%s,%d: assertion failed\n", __FILE__, __LINE__); \ -+ BUG(); \ -+} while (0) -+ -+struct ag71xx_desc { -+ u32 data; -+ u32 ctrl; -+#define DESC_EMPTY BIT(31) -+#define DESC_MORE BIT(24) -+#define DESC_PKTLEN_M 0xfff -+ u32 next; -+ u32 pad; -+} __attribute__((aligned(4))); -+ -+struct ag71xx_buf { -+ struct sk_buff *skb; -+ struct ag71xx_desc *desc; -+ dma_addr_t dma_addr; -+ unsigned long timestamp; -+}; -+ -+struct ag71xx_ring { -+ struct ag71xx_buf *buf; -+ u8 *descs_cpu; -+ dma_addr_t descs_dma; -+ unsigned int desc_size; -+ unsigned int curr; -+ unsigned int dirty; -+ unsigned int size; -+}; -+ -+struct ag71xx_mdio { -+ struct mii_bus *mii_bus; -+ int mii_irq[PHY_MAX_ADDR]; -+ void __iomem *mdio_base; -+ struct ag71xx_mdio_platform_data *pdata; -+}; -+ -+struct ag71xx_int_stats { -+ unsigned long rx_pr; -+ unsigned long rx_be; -+ unsigned long rx_of; -+ unsigned long tx_ps; -+ unsigned long tx_be; -+ unsigned long tx_ur; -+ unsigned long total; -+}; -+ -+struct ag71xx_napi_stats { -+ unsigned long napi_calls; -+ unsigned long rx_count; -+ unsigned long rx_packets; -+ unsigned long rx_packets_max; -+ unsigned long tx_count; -+ unsigned long tx_packets; -+ unsigned long tx_packets_max; -+ -+ unsigned long rx[AG71XX_NAPI_WEIGHT + 1]; -+ unsigned long tx[AG71XX_NAPI_WEIGHT + 1]; -+}; -+ -+struct ag71xx_debug { -+ struct dentry *debugfs_dir; -+ -+ struct ag71xx_int_stats int_stats; -+ struct ag71xx_napi_stats napi_stats; -+}; -+ -+struct ag71xx { -+ void __iomem *mac_base; -+ void __iomem *mii_ctrl; -+ -+ spinlock_t lock; -+ struct platform_device *pdev; -+ struct net_device *dev; -+ struct napi_struct napi; -+ u32 msg_enable; -+ -+ struct ag71xx_desc *stop_desc; -+ dma_addr_t stop_desc_dma; -+ -+ struct ag71xx_ring rx_ring; -+ struct ag71xx_ring tx_ring; -+ -+ struct mii_bus *mii_bus; -+ struct phy_device *phy_dev; -+ void *phy_priv; -+ -+ unsigned int link; -+ unsigned int speed; -+ int duplex; -+ -+ struct work_struct restart_work; -+ struct delayed_work link_work; -+ struct timer_list oom_timer; -+ -+#ifdef CONFIG_AG71XX_DEBUG_FS -+ struct ag71xx_debug debug; -+#endif -+}; -+ -+extern struct ethtool_ops ag71xx_ethtool_ops; -+void ag71xx_link_adjust(struct ag71xx *ag); -+ -+int ag71xx_mdio_driver_init(void) __init; -+void ag71xx_mdio_driver_exit(void); -+ -+int ag71xx_phy_connect(struct ag71xx *ag); -+void ag71xx_phy_disconnect(struct ag71xx *ag); -+void ag71xx_phy_start(struct ag71xx *ag); -+void ag71xx_phy_stop(struct ag71xx *ag); -+ -+static inline struct ag71xx_platform_data *ag71xx_get_pdata(struct ag71xx *ag) -+{ -+ return ag->pdev->dev.platform_data; -+} -+ -+static inline int ag71xx_desc_empty(struct ag71xx_desc *desc) -+{ -+ return (desc->ctrl & DESC_EMPTY) != 0; -+} -+ -+static inline int ag71xx_desc_pktlen(struct ag71xx_desc *desc) -+{ -+ return desc->ctrl & DESC_PKTLEN_M; -+} -+ -+/* Register offsets */ -+#define AG71XX_REG_MAC_CFG1 0x0000 -+#define AG71XX_REG_MAC_CFG2 0x0004 -+#define AG71XX_REG_MAC_IPG 0x0008 -+#define AG71XX_REG_MAC_HDX 0x000c -+#define AG71XX_REG_MAC_MFL 0x0010 -+#define AG71XX_REG_MII_CFG 0x0020 -+#define AG71XX_REG_MII_CMD 0x0024 -+#define AG71XX_REG_MII_ADDR 0x0028 -+#define AG71XX_REG_MII_CTRL 0x002c -+#define AG71XX_REG_MII_STATUS 0x0030 -+#define AG71XX_REG_MII_IND 0x0034 -+#define AG71XX_REG_MAC_IFCTL 0x0038 -+#define AG71XX_REG_MAC_ADDR1 0x0040 -+#define AG71XX_REG_MAC_ADDR2 0x0044 -+#define AG71XX_REG_FIFO_CFG0 0x0048 -+#define AG71XX_REG_FIFO_CFG1 0x004c -+#define AG71XX_REG_FIFO_CFG2 0x0050 -+#define AG71XX_REG_FIFO_CFG3 0x0054 -+#define AG71XX_REG_FIFO_CFG4 0x0058 -+#define AG71XX_REG_FIFO_CFG5 0x005c -+#define AG71XX_REG_FIFO_RAM0 0x0060 -+#define AG71XX_REG_FIFO_RAM1 0x0064 -+#define AG71XX_REG_FIFO_RAM2 0x0068 -+#define AG71XX_REG_FIFO_RAM3 0x006c -+#define AG71XX_REG_FIFO_RAM4 0x0070 -+#define AG71XX_REG_FIFO_RAM5 0x0074 -+#define AG71XX_REG_FIFO_RAM6 0x0078 -+#define AG71XX_REG_FIFO_RAM7 0x007c -+ -+#define AG71XX_REG_TX_CTRL 0x0180 -+#define AG71XX_REG_TX_DESC 0x0184 -+#define AG71XX_REG_TX_STATUS 0x0188 -+#define AG71XX_REG_RX_CTRL 0x018c -+#define AG71XX_REG_RX_DESC 0x0190 -+#define AG71XX_REG_RX_STATUS 0x0194 -+#define AG71XX_REG_INT_ENABLE 0x0198 -+#define AG71XX_REG_INT_STATUS 0x019c -+ -+#define AG71XX_REG_FIFO_DEPTH 0x01a8 -+#define AG71XX_REG_RX_SM 0x01b0 -+#define AG71XX_REG_TX_SM 0x01b4 -+ -+#define MAC_CFG1_TXE BIT(0) /* Tx Enable */ -+#define MAC_CFG1_STX BIT(1) /* Synchronize Tx Enable */ -+#define MAC_CFG1_RXE BIT(2) /* Rx Enable */ -+#define MAC_CFG1_SRX BIT(3) /* Synchronize Rx Enable */ -+#define MAC_CFG1_TFC BIT(4) /* Tx Flow Control Enable */ -+#define MAC_CFG1_RFC BIT(5) /* Rx Flow Control Enable */ -+#define MAC_CFG1_LB BIT(8) /* Loopback mode */ -+#define MAC_CFG1_SR BIT(31) /* Soft Reset */ -+ -+#define MAC_CFG2_FDX BIT(0) -+#define MAC_CFG2_CRC_EN BIT(1) -+#define MAC_CFG2_PAD_CRC_EN BIT(2) -+#define MAC_CFG2_LEN_CHECK BIT(4) -+#define MAC_CFG2_HUGE_FRAME_EN BIT(5) -+#define MAC_CFG2_IF_1000 BIT(9) -+#define MAC_CFG2_IF_10_100 BIT(8) -+ -+#define FIFO_CFG0_WTM BIT(0) /* Watermark Module */ -+#define FIFO_CFG0_RXS BIT(1) /* Rx System Module */ -+#define FIFO_CFG0_RXF BIT(2) /* Rx Fabric Module */ -+#define FIFO_CFG0_TXS BIT(3) /* Tx System Module */ -+#define FIFO_CFG0_TXF BIT(4) /* Tx Fabric Module */ -+#define FIFO_CFG0_ALL (FIFO_CFG0_WTM | FIFO_CFG0_RXS | FIFO_CFG0_RXF \ -+ | FIFO_CFG0_TXS | FIFO_CFG0_TXF) -+ -+#define FIFO_CFG0_ENABLE_SHIFT 8 -+ -+#define FIFO_CFG4_DE BIT(0) /* Drop Event */ -+#define FIFO_CFG4_DV BIT(1) /* RX_DV Event */ -+#define FIFO_CFG4_FC BIT(2) /* False Carrier */ -+#define FIFO_CFG4_CE BIT(3) /* Code Error */ -+#define FIFO_CFG4_CR BIT(4) /* CRC error */ -+#define FIFO_CFG4_LM BIT(5) /* Length Mismatch */ -+#define FIFO_CFG4_LO BIT(6) /* Length out of range */ -+#define FIFO_CFG4_OK BIT(7) /* Packet is OK */ -+#define FIFO_CFG4_MC BIT(8) /* Multicast Packet */ -+#define FIFO_CFG4_BC BIT(9) /* Broadcast Packet */ -+#define FIFO_CFG4_DR BIT(10) /* Dribble */ -+#define FIFO_CFG4_LE BIT(11) /* Long Event */ -+#define FIFO_CFG4_CF BIT(12) /* Control Frame */ -+#define FIFO_CFG4_PF BIT(13) /* Pause Frame */ -+#define FIFO_CFG4_UO BIT(14) /* Unsupported Opcode */ -+#define FIFO_CFG4_VT BIT(15) /* VLAN tag detected */ -+#define FIFO_CFG4_FT BIT(16) /* Frame Truncated */ -+#define FIFO_CFG4_UC BIT(17) /* Unicast Packet */ -+ -+#define FIFO_CFG5_DE BIT(0) /* Drop Event */ -+#define FIFO_CFG5_DV BIT(1) /* RX_DV Event */ -+#define FIFO_CFG5_FC BIT(2) /* False Carrier */ -+#define FIFO_CFG5_CE BIT(3) /* Code Error */ -+#define FIFO_CFG5_LM BIT(4) /* Length Mismatch */ -+#define FIFO_CFG5_LO BIT(5) /* Length Out of Range */ -+#define FIFO_CFG5_OK BIT(6) /* Packet is OK */ -+#define FIFO_CFG5_MC BIT(7) /* Multicast Packet */ -+#define FIFO_CFG5_BC BIT(8) /* Broadcast Packet */ -+#define FIFO_CFG5_DR BIT(9) /* Dribble */ -+#define FIFO_CFG5_CF BIT(10) /* Control Frame */ -+#define FIFO_CFG5_PF BIT(11) /* Pause Frame */ -+#define FIFO_CFG5_UO BIT(12) /* Unsupported Opcode */ -+#define FIFO_CFG5_VT BIT(13) /* VLAN tag detected */ -+#define FIFO_CFG5_LE BIT(14) /* Long Event */ -+#define FIFO_CFG5_FT BIT(15) /* Frame Truncated */ -+#define FIFO_CFG5_16 BIT(16) /* unknown */ -+#define FIFO_CFG5_17 BIT(17) /* unknown */ -+#define FIFO_CFG5_SF BIT(18) /* Short Frame */ -+#define FIFO_CFG5_BM BIT(19) /* Byte Mode */ -+ -+#define AG71XX_INT_TX_PS BIT(0) -+#define AG71XX_INT_TX_UR BIT(1) -+#define AG71XX_INT_TX_BE BIT(3) -+#define AG71XX_INT_RX_PR BIT(4) -+#define AG71XX_INT_RX_OF BIT(6) -+#define AG71XX_INT_RX_BE BIT(7) -+ -+#define MAC_IFCTL_SPEED BIT(16) -+ -+#define MII_CFG_CLK_DIV_4 0 -+#define MII_CFG_CLK_DIV_6 2 -+#define MII_CFG_CLK_DIV_8 3 -+#define MII_CFG_CLK_DIV_10 4 -+#define MII_CFG_CLK_DIV_14 5 -+#define MII_CFG_CLK_DIV_20 6 -+#define MII_CFG_CLK_DIV_28 7 -+#define MII_CFG_RESET BIT(31) -+ -+#define MII_CMD_WRITE 0x0 -+#define MII_CMD_READ 0x1 -+#define MII_ADDR_SHIFT 8 -+#define MII_IND_BUSY BIT(0) -+#define MII_IND_INVALID BIT(2) -+ -+#define TX_CTRL_TXE BIT(0) /* Tx Enable */ -+ -+#define TX_STATUS_PS BIT(0) /* Packet Sent */ -+#define TX_STATUS_UR BIT(1) /* Tx Underrun */ -+#define TX_STATUS_BE BIT(3) /* Bus Error */ -+ -+#define RX_CTRL_RXE BIT(0) /* Rx Enable */ -+ -+#define RX_STATUS_PR BIT(0) /* Packet Received */ -+#define RX_STATUS_OF BIT(2) /* Rx Overflow */ -+#define RX_STATUS_BE BIT(3) /* Bus Error */ -+ -+#define MII_CTRL_IF_MASK 3 -+#define MII_CTRL_SPEED_SHIFT 4 -+#define MII_CTRL_SPEED_MASK 3 -+#define MII_CTRL_SPEED_10 0 -+#define MII_CTRL_SPEED_100 1 -+#define MII_CTRL_SPEED_1000 2 -+ -+static inline void ag71xx_check_reg_offset(struct ag71xx *ag, unsigned reg) -+{ -+ switch (reg) { -+ case AG71XX_REG_MAC_CFG1 ... AG71XX_REG_MAC_MFL: -+ case AG71XX_REG_MAC_IFCTL ... AG71XX_REG_INT_STATUS: -+ case AG71XX_REG_MII_CFG: -+ break; -+ -+ default: -+ BUG(); -+ } -+} -+ -+static inline void ag71xx_wr(struct ag71xx *ag, unsigned reg, u32 value) -+{ -+ ag71xx_check_reg_offset(ag, reg); -+ -+ __raw_writel(value, ag->mac_base + reg); -+ /* flush write */ -+ (void) __raw_readl(ag->mac_base + reg); -+} -+ -+static inline u32 ag71xx_rr(struct ag71xx *ag, unsigned reg) -+{ -+ ag71xx_check_reg_offset(ag, reg); -+ -+ return __raw_readl(ag->mac_base + reg); -+} -+ -+static inline void ag71xx_sb(struct ag71xx *ag, unsigned reg, u32 mask) -+{ -+ void __iomem *r; -+ -+ ag71xx_check_reg_offset(ag, reg); -+ -+ r = ag->mac_base + reg; -+ __raw_writel(__raw_readl(r) | mask, r); -+ /* flush write */ -+ (void)__raw_readl(r); -+} -+ -+static inline void ag71xx_cb(struct ag71xx *ag, unsigned reg, u32 mask) -+{ -+ void __iomem *r; -+ -+ ag71xx_check_reg_offset(ag, reg); -+ -+ r = ag->mac_base + reg; -+ __raw_writel(__raw_readl(r) & ~mask, r); -+ /* flush write */ -+ (void) __raw_readl(r); -+} -+ -+static inline void ag71xx_int_enable(struct ag71xx *ag, u32 ints) -+{ -+ ag71xx_sb(ag, AG71XX_REG_INT_ENABLE, ints); -+} -+ -+static inline void ag71xx_int_disable(struct ag71xx *ag, u32 ints) -+{ -+ ag71xx_cb(ag, AG71XX_REG_INT_ENABLE, ints); -+} -+ -+static inline void ag71xx_mii_ctrl_wr(struct ag71xx *ag, u32 value) -+{ -+ struct ag71xx_platform_data *pdata = ag71xx_get_pdata(ag); -+ -+ if (pdata->is_ar724x) -+ return; -+ -+ __raw_writel(value, ag->mii_ctrl); -+ -+ /* flush write */ -+ __raw_readl(ag->mii_ctrl); -+} -+ -+static inline u32 ag71xx_mii_ctrl_rr(struct ag71xx *ag) -+{ -+ struct ag71xx_platform_data *pdata = ag71xx_get_pdata(ag); -+ -+ if (pdata->is_ar724x) -+ return 0xffffffff; -+ -+ return __raw_readl(ag->mii_ctrl); -+} -+ -+static inline void ag71xx_mii_ctrl_set_if(struct ag71xx *ag, -+ unsigned int mii_if) -+{ -+ u32 t; -+ -+ t = ag71xx_mii_ctrl_rr(ag); -+ t &= ~(MII_CTRL_IF_MASK); -+ t |= (mii_if & MII_CTRL_IF_MASK); -+ ag71xx_mii_ctrl_wr(ag, t); -+} -+ -+static inline void ag71xx_mii_ctrl_set_speed(struct ag71xx *ag, -+ unsigned int speed) -+{ -+ u32 t; -+ -+ t = ag71xx_mii_ctrl_rr(ag); -+ t &= ~(MII_CTRL_SPEED_MASK << MII_CTRL_SPEED_SHIFT); -+ t |= (speed & MII_CTRL_SPEED_MASK) << MII_CTRL_SPEED_SHIFT; -+ ag71xx_mii_ctrl_wr(ag, t); -+} -+ -+#ifdef CONFIG_AG71XX_AR8216_SUPPORT -+void ag71xx_add_ar8216_header(struct ag71xx *ag, struct sk_buff *skb); -+int ag71xx_remove_ar8216_header(struct ag71xx *ag, struct sk_buff *skb, -+ int pktlen); -+static inline int ag71xx_has_ar8216(struct ag71xx *ag) -+{ -+ return ag71xx_get_pdata(ag)->has_ar8216; -+} -+#else -+static inline void ag71xx_add_ar8216_header(struct ag71xx *ag, -+ struct sk_buff *skb) -+{ -+} -+ -+static inline int ag71xx_remove_ar8216_header(struct ag71xx *ag, -+ struct sk_buff *skb, -+ int pktlen) -+{ -+ return 0; -+} -+static inline int ag71xx_has_ar8216(struct ag71xx *ag) -+{ -+ return 0; -+} -+#endif -+ -+#ifdef CONFIG_AG71XX_DEBUG_FS -+int ag71xx_debugfs_root_init(void); -+void ag71xx_debugfs_root_exit(void); -+int ag71xx_debugfs_init(struct ag71xx *ag); -+void ag71xx_debugfs_exit(struct ag71xx *ag); -+void ag71xx_debugfs_update_int_stats(struct ag71xx *ag, u32 status); -+void ag71xx_debugfs_update_napi_stats(struct ag71xx *ag, int rx, int tx); -+#else -+static inline int ag71xx_debugfs_root_init(void) { return 0; } -+static inline void ag71xx_debugfs_root_exit(void) {} -+static inline int ag71xx_debugfs_init(struct ag71xx *ag) { return 0; } -+static inline void ag71xx_debugfs_exit(struct ag71xx *ag) {} -+static inline void ag71xx_debugfs_update_int_stats(struct ag71xx *ag, -+ u32 status) {} -+static inline void ag71xx_debugfs_update_napi_stats(struct ag71xx *ag, -+ int rx, int tx) {} -+#endif /* CONFIG_AG71XX_DEBUG_FS */ -+ -+void ag71xx_ar7240_start(struct ag71xx *ag); -+void ag71xx_ar7240_stop(struct ag71xx *ag); -+int ag71xx_ar7240_init(struct ag71xx *ag); -+void ag71xx_ar7240_cleanup(struct ag71xx *ag); -+ -+int ag71xx_mdio_mii_read(struct ag71xx_mdio *am, int addr, int reg); -+void ag71xx_mdio_mii_write(struct ag71xx_mdio *am, int addr, int reg, u16 val); -+ -+u16 ar7240sw_phy_read(struct mii_bus *mii, unsigned phy_addr, -+ unsigned reg_addr); -+int ar7240sw_phy_write(struct mii_bus *mii, unsigned phy_addr, -+ unsigned reg_addr, u16 reg_val); -+ -+#endif /* _AG71XX_H */ diff -Nur linux-2.6.39.orig/drivers/net/ag71xx/ag71xx_main.c linux-2.6.39/drivers/net/ag71xx/ag71xx_main.c --- linux-2.6.39.orig/drivers/net/ag71xx/ag71xx_main.c 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.39/drivers/net/ag71xx/ag71xx_main.c 2011-08-22 07:40:12.160480642 +0200 ++++ linux-2.6.39/drivers/net/ag71xx/ag71xx_main.c 2011-08-24 18:17:24.000000000 +0200 @@ -0,0 +1,1291 @@ +/* + * Atheros AR71xx built-in ethernet mac driver @@ -20955,7 +18558,7 @@ diff -Nur linux-2.6.39.orig/drivers/net/ag71xx/ag71xx_main.c linux-2.6.39/driver +MODULE_ALIAS("platform:" AG71XX_DRV_NAME); diff -Nur linux-2.6.39.orig/drivers/net/ag71xx/ag71xx_mdio.c linux-2.6.39/drivers/net/ag71xx/ag71xx_mdio.c --- linux-2.6.39.orig/drivers/net/ag71xx/ag71xx_mdio.c 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.39/drivers/net/ag71xx/ag71xx_mdio.c 2011-04-27 12:19:22.257663952 +0200 ++++ linux-2.6.39/drivers/net/ag71xx/ag71xx_mdio.c 2011-08-24 18:17:24.000000000 +0200 @@ -0,0 +1,248 @@ +/* + * Atheros AR71xx built-in ethernet mac driver @@ -21207,7 +18810,7 @@ diff -Nur linux-2.6.39.orig/drivers/net/ag71xx/ag71xx_mdio.c linux-2.6.39/driver +} diff -Nur linux-2.6.39.orig/drivers/net/ag71xx/ag71xx_phy.c linux-2.6.39/drivers/net/ag71xx/ag71xx_phy.c --- linux-2.6.39.orig/drivers/net/ag71xx/ag71xx_phy.c 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.39/drivers/net/ag71xx/ag71xx_phy.c 2011-08-06 09:32:37.298018216 +0200 ++++ linux-2.6.39/drivers/net/ag71xx/ag71xx_phy.c 2011-08-24 18:17:24.000000000 +0200 @@ -0,0 +1,228 @@ +/* + * Atheros AR71xx built-in ethernet mac driver @@ -21437,88 +19040,9 @@ diff -Nur linux-2.6.39.orig/drivers/net/ag71xx/ag71xx_phy.c linux-2.6.39/drivers + else if (ag->phy_dev) + phy_disconnect(ag->phy_dev); +} -diff -Nur linux-2.6.39.orig/drivers/net/ag71xx/Kconfig linux-2.6.39/drivers/net/ag71xx/Kconfig ---- linux-2.6.39.orig/drivers/net/ag71xx/Kconfig 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.39/drivers/net/ag71xx/Kconfig 2011-04-27 12:19:22.247664026 +0200 -@@ -0,0 +1,33 @@ -+config AG71XX -+ tristate "Atheros AR71xx built-in ethernet mac support" -+ depends on ATHEROS_AR71XX -+ select PHYLIB -+ help -+ If you wish to compile a kernel for AR71xx/91xx and enable -+ ethernet support, then you should always answer Y to this. -+ -+if AG71XX -+ -+config AG71XX_DEBUG -+ bool "Atheros AR71xx built-in ethernet driver debugging" -+ default n -+ help -+ Atheros AR71xx built-in ethernet driver debugging messages. -+ -+config AG71XX_DEBUG_FS -+ bool "Atheros AR71xx built-in ethernet driver debugfs support" -+ depends on DEBUG_FS -+ default n -+ help -+ Say Y, if you need access to various statistics provided by -+ the ag71xx driver. -+ -+config AG71XX_AR8216_SUPPORT -+ bool "special support for the Atheros AR8216 switch" -+ default n -+ default y if AR71XX_MACH_WNR2000 || AR71XX_MACH_MZK_W04NU -+ help -+ Say 'y' here if you want to enable special support for the -+ Atheros AR8216 switch found on some boards. -+ -+endif -diff -Nur linux-2.6.39.orig/drivers/net/ag71xx/Makefile linux-2.6.39/drivers/net/ag71xx/Makefile ---- linux-2.6.39.orig/drivers/net/ag71xx/Makefile 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.39/drivers/net/ag71xx/Makefile 2011-04-27 12:19:22.257663952 +0200 -@@ -0,0 +1,15 @@ -+# -+# Makefile for the Atheros AR71xx built-in ethernet macs -+# -+ -+ag71xx-y += ag71xx_main.o -+ag71xx-y += ag71xx_ethtool.o -+ag71xx-y += ag71xx_phy.o -+ag71xx-y += ag71xx_mdio.o -+ag71xx-y += ag71xx_ar7240.o -+ -+ag71xx-$(CONFIG_AG71XX_DEBUG_FS) += ag71xx_debugfs.o -+ag71xx-$(CONFIG_AG71XX_AR8216_SUPPORT) += ag71xx_ar8216.o -+ -+obj-$(CONFIG_AG71XX) += ag71xx.o -+ -diff -Nur linux-2.6.39.orig/drivers/net/Kconfig linux-2.6.39/drivers/net/Kconfig ---- linux-2.6.39.orig/drivers/net/Kconfig 2011-05-19 06:06:34.000000000 +0200 -+++ linux-2.6.39/drivers/net/Kconfig 2011-08-22 16:21:54.787979739 +0200 -@@ -2071,6 +2071,8 @@ - - The safe and default value for this is N. - -+source drivers/net/ag71xx/Kconfig -+ - config DL2K - tristate "DL2000/TC902x-based Gigabit Ethernet support" - depends on PCI -diff -Nur linux-2.6.39.orig/drivers/net/Makefile linux-2.6.39/drivers/net/Makefile ---- linux-2.6.39.orig/drivers/net/Makefile 2011-05-19 06:06:34.000000000 +0200 -+++ linux-2.6.39/drivers/net/Makefile 2011-08-22 16:21:54.797980120 +0200 -@@ -112,6 +112,7 @@ - # end link order section - # - -+obj-$(CONFIG_AG71XX) += ag71xx/ - obj-$(CONFIG_SUNDANCE) += sundance.o - obj-$(CONFIG_HAMACHI) += hamachi.o - obj-$(CONFIG_NET) += Space.o loopback.o diff -Nur linux-2.6.39.orig/drivers/net/phy/Kconfig linux-2.6.39/drivers/net/phy/Kconfig --- linux-2.6.39.orig/drivers/net/phy/Kconfig 2011-05-19 06:06:34.000000000 +0200 -+++ linux-2.6.39/drivers/net/phy/Kconfig 2011-08-22 22:19:34.339230055 +0200 ++++ linux-2.6.39/drivers/net/phy/Kconfig 2011-08-24 18:17:24.000000000 +0200 @@ -13,6 +13,12 @@ if PHYLIB @@ -21534,7 +19058,7 @@ diff -Nur linux-2.6.39.orig/drivers/net/phy/Kconfig linux-2.6.39/drivers/net/phy config MARVELL_PHY diff -Nur linux-2.6.39.orig/drivers/net/phy/Makefile linux-2.6.39/drivers/net/phy/Makefile --- linux-2.6.39.orig/drivers/net/phy/Makefile 2011-05-19 06:06:34.000000000 +0200 -+++ linux-2.6.39/drivers/net/phy/Makefile 2011-08-22 22:19:34.339230055 +0200 ++++ linux-2.6.39/drivers/net/phy/Makefile 2011-08-24 18:17:24.000000000 +0200 @@ -3,6 +3,7 @@ libphy-objs := phy.o phy_device.o mdio_bus.o @@ -21545,7 +19069,7 @@ diff -Nur linux-2.6.39.orig/drivers/net/phy/Makefile linux-2.6.39/drivers/net/ph obj-$(CONFIG_CICADA_PHY) += cicada.o diff -Nur linux-2.6.39.orig/drivers/net/phy/micrel.c linux-2.6.39/drivers/net/phy/micrel.c --- linux-2.6.39.orig/drivers/net/phy/micrel.c 2011-05-19 06:06:34.000000000 +0200 -+++ linux-2.6.39/drivers/net/phy/micrel.c 2011-04-27 12:19:22.257663952 +0200 ++++ linux-2.6.39/drivers/net/phy/micrel.c 2011-08-24 18:17:24.000000000 +0200 @@ -1,251 +1,82 @@ /* - * drivers/net/phy/micrel.c @@ -21850,7 +19374,7 @@ diff -Nur linux-2.6.39.orig/drivers/net/phy/micrel.c linux-2.6.39/drivers/net/ph +MODULE_LICENSE("GPL v2"); diff -Nur linux-2.6.39.orig/drivers/net/phy/phy.c linux-2.6.39/drivers/net/phy/phy.c --- linux-2.6.39.orig/drivers/net/phy/phy.c 2011-05-19 06:06:34.000000000 +0200 -+++ linux-2.6.39/drivers/net/phy/phy.c 2011-08-22 22:00:02.067980292 +0200 ++++ linux-2.6.39/drivers/net/phy/phy.c 2011-08-24 18:17:24.000000000 +0200 @@ -297,6 +297,50 @@ } EXPORT_SYMBOL(phy_ethtool_gset); @@ -21913,7 +19437,7 @@ diff -Nur linux-2.6.39.orig/drivers/net/phy/phy.c linux-2.6.39/drivers/net/phy/p idx = phy_find_valid(idx, phydev->supported); diff -Nur linux-2.6.39.orig/drivers/net/phy/phy_device.c linux-2.6.39/drivers/net/phy/phy_device.c --- linux-2.6.39.orig/drivers/net/phy/phy_device.c 2011-05-19 06:06:34.000000000 +0200 -+++ linux-2.6.39/drivers/net/phy/phy_device.c 2011-08-22 22:00:06.817981347 +0200 ++++ linux-2.6.39/drivers/net/phy/phy_device.c 2011-08-24 18:17:24.000000000 +0200 @@ -149,6 +149,18 @@ } EXPORT_SYMBOL(phy_scan_fixups); @@ -21944,7 +19468,7 @@ diff -Nur linux-2.6.39.orig/drivers/net/phy/phy_device.c linux-2.6.39/drivers/ne INIT_DELAYED_WORK(&dev->state_queue, phy_state_machine); diff -Nur linux-2.6.39.orig/drivers/net/phy/swconfig.c linux-2.6.39/drivers/net/phy/swconfig.c --- linux-2.6.39.orig/drivers/net/phy/swconfig.c 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.39/drivers/net/phy/swconfig.c 2011-08-22 22:18:58.887990974 +0200 ++++ linux-2.6.39/drivers/net/phy/swconfig.c 2011-08-24 18:17:24.000000000 +0200 @@ -0,0 +1,954 @@ +/* + * swconfig.c: Switch configuration API @@ -22900,9 +20424,80 @@ diff -Nur linux-2.6.39.orig/drivers/net/phy/swconfig.c linux-2.6.39/drivers/net/ +module_init(swconfig_init); +module_exit(swconfig_exit); + +diff -Nur linux-2.6.39.orig/drivers/spi/Kconfig linux-2.6.39/drivers/spi/Kconfig +--- linux-2.6.39.orig/drivers/spi/Kconfig 2011-05-19 06:06:34.000000000 +0200 ++++ linux-2.6.39/drivers/spi/Kconfig 2011-08-24 18:17:24.000000000 +0200 +@@ -67,6 +67,13 @@ + This enables support for the SPI controller present on the + Atheros AR71XX/AR724X/AR913X SoCs. + ++config SPI_AR71XX ++ tristate "Atheros AR71xx SPI Controller" ++ depends on SPI_MASTER && ATHEROS_AR71XX ++ select SPI_BITBANG ++ help ++ This is the SPI contoller driver for Atheros AR71xx. ++ + config SPI_ATMEL + tristate "Atmel SPI Controller" + depends on (ARCH_AT91 || AVR32) +@@ -301,6 +308,12 @@ + config SPI_PXA2XX_PCI + def_bool SPI_PXA2XX && X86_32 && PCI + ++config SPI_RB4XX ++ tristate "Mikrotik RB4XX SPI master" ++ depends on SPI_MASTER && AR71XX_MACH_RB4XX ++ help ++ SPI controller driver for the Mikrotik RB4xx series boards. ++ + config SPI_S3C24XX + tristate "Samsung S3C24XX series SPI" + depends on ARCH_S3C2410 && EXPERIMENTAL +@@ -457,6 +470,13 @@ + sysfs interface, with each line presented as a kind of GPIO + exposing both switch control and diagnostic feedback. + ++config SPI_RB4XX_CPLD ++ tristate "MikroTik RB4XX CPLD driver" ++ depends on AR71XX_MACH_RB4XX ++ help ++ SPI driver for the Xilinx CPLD chip present on the ++ MikroTik RB4xx boards. ++ + # + # Add new SPI protocol masters in alphabetical order above this line + # +diff -Nur linux-2.6.39.orig/drivers/spi/Makefile linux-2.6.39/drivers/spi/Makefile +--- linux-2.6.39.orig/drivers/spi/Makefile 2011-05-19 06:06:34.000000000 +0200 ++++ linux-2.6.39/drivers/spi/Makefile 2011-08-24 18:17:24.000000000 +0200 +@@ -10,6 +10,7 @@ + + # SPI master controller drivers (bus) + obj-$(CONFIG_SPI_ALTERA) += spi_altera.o ++obj-$(CONFIG_SPI_AR71XX) += ar71xx_spi.o + obj-$(CONFIG_SPI_ATMEL) += atmel_spi.o + obj-$(CONFIG_SPI_ATH79) += ath79_spi.o + obj-$(CONFIG_SPI_BFIN) += spi_bfin5xx.o +@@ -54,6 +55,7 @@ + obj-$(CONFIG_SPI_SH_MSIOF) += spi_sh_msiof.o + obj-$(CONFIG_SPI_STMP3XXX) += spi_stmp.o + obj-$(CONFIG_SPI_NUC900) += spi_nuc900.o ++obj-$(CONFIG_SPI_RB4XX) += rb4xx_spi.o + + # special build for s3c24xx spi driver with fiq support + spi_s3c24xx_hw-y := spi_s3c24xx.o +@@ -62,6 +64,7 @@ + # ... add above this line ... + + # SPI protocol drivers (device/link on bus) ++obj-$(CONFIG_SPI_RB4XX_CPLD) += spi_rb4xx_cpld.o + obj-$(CONFIG_SPI_SPIDEV) += spidev.o + obj-$(CONFIG_SPI_TLE62X0) += tle62x0.o + # ... add above this line ... diff -Nur linux-2.6.39.orig/drivers/spi/ap83_spi.c linux-2.6.39/drivers/spi/ap83_spi.c --- linux-2.6.39.orig/drivers/spi/ap83_spi.c 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.39/drivers/spi/ap83_spi.c 2011-04-27 12:19:22.317665385 +0200 ++++ linux-2.6.39/drivers/spi/ap83_spi.c 2011-08-24 18:17:24.000000000 +0200 @@ -0,0 +1,283 @@ +/* + * Atheros AP83 board specific SPI Controller driver @@ -23189,7 +20784,7 @@ diff -Nur linux-2.6.39.orig/drivers/spi/ap83_spi.c linux-2.6.39/drivers/spi/ap83 +MODULE_LICENSE("GPL v2"); diff -Nur linux-2.6.39.orig/drivers/spi/ar71xx_spi.c linux-2.6.39/drivers/spi/ar71xx_spi.c --- linux-2.6.39.orig/drivers/spi/ar71xx_spi.c 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.39/drivers/spi/ar71xx_spi.c 2011-04-27 12:19:22.317665385 +0200 ++++ linux-2.6.39/drivers/spi/ar71xx_spi.c 2011-08-24 18:17:24.000000000 +0200 @@ -0,0 +1,283 @@ +/* + * Atheros AR71xx SPI Controller driver @@ -23474,645 +21069,9 @@ diff -Nur linux-2.6.39.orig/drivers/spi/ar71xx_spi.c linux-2.6.39/drivers/spi/ar +MODULE_AUTHOR("Gabor Juhos <juhosg@openwrt.org>"); +MODULE_AUTHOR("Imre Kaloz <kaloz@openwrt.org>"); +MODULE_LICENSE("GPL v2"); -diff -Nur linux-2.6.39.orig/drivers/spi/Kconfig linux-2.6.39/drivers/spi/Kconfig ---- linux-2.6.39.orig/drivers/spi/Kconfig 2011-05-19 06:06:34.000000000 +0200 -+++ linux-2.6.39/drivers/spi/Kconfig 2011-08-23 15:10:24.167989908 +0200 -@@ -67,6 +67,13 @@ - This enables support for the SPI controller present on the - Atheros AR71XX/AR724X/AR913X SoCs. - -+config SPI_AR71XX -+ tristate "Atheros AR71xx SPI Controller" -+ depends on SPI_MASTER && ATHEROS_AR71XX -+ select SPI_BITBANG -+ help -+ This is the SPI contoller driver for Atheros AR71xx. -+ - config SPI_ATMEL - tristate "Atmel SPI Controller" - depends on (ARCH_AT91 || AVR32) -@@ -301,6 +308,12 @@ - config SPI_PXA2XX_PCI - def_bool SPI_PXA2XX && X86_32 && PCI - -+config SPI_RB4XX -+ tristate "Mikrotik RB4XX SPI master" -+ depends on SPI_MASTER && AR71XX_MACH_RB4XX -+ help -+ SPI controller driver for the Mikrotik RB4xx series boards. -+ - config SPI_S3C24XX - tristate "Samsung S3C24XX series SPI" - depends on ARCH_S3C2410 && EXPERIMENTAL -@@ -457,6 +470,13 @@ - sysfs interface, with each line presented as a kind of GPIO - exposing both switch control and diagnostic feedback. - -+config SPI_RB4XX_CPLD -+ tristate "MikroTik RB4XX CPLD driver" -+ depends on AR71XX_MACH_RB4XX -+ help -+ SPI driver for the Xilinx CPLD chip present on the -+ MikroTik RB4xx boards. -+ - # - # Add new SPI protocol masters in alphabetical order above this line - # -diff -Nur linux-2.6.39.orig/drivers/spi/Kconfig.orig linux-2.6.39/drivers/spi/Kconfig.orig ---- linux-2.6.39.orig/drivers/spi/Kconfig.orig 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.39/drivers/spi/Kconfig.orig 2011-08-23 15:10:11.277991848 +0200 -@@ -0,0 +1,482 @@ -+# -+# SPI driver configuration -+# -+# NOTE: the reason this doesn't show SPI slave support is mostly that -+# nobody's needed a slave side API yet. The master-role API is not -+# fully appropriate there, so it'd need some thought to do well. -+# -+menuconfig SPI -+ bool "SPI support" -+ depends on HAS_IOMEM -+ help -+ The "Serial Peripheral Interface" is a low level synchronous -+ protocol. Chips that support SPI can have data transfer rates -+ up to several tens of Mbit/sec. Chips are addressed with a -+ controller and a chipselect. Most SPI slaves don't support -+ dynamic device discovery; some are even write-only or read-only. -+ -+ SPI is widely used by microcontrollers to talk with sensors, -+ eeprom and flash memory, codecs and various other controller -+ chips, analog to digital (and d-to-a) converters, and more. -+ MMC and SD cards can be accessed using SPI protocol; and for -+ DataFlash cards used in MMC sockets, SPI must always be used. -+ -+ SPI is one of a family of similar protocols using a four wire -+ interface (select, clock, data in, data out) including Microwire -+ (half duplex), SSP, SSI, and PSP. This driver framework should -+ work with most such devices and controllers. -+ -+if SPI -+ -+config SPI_DEBUG -+ boolean "Debug support for SPI drivers" -+ depends on DEBUG_KERNEL -+ help -+ Say "yes" to enable debug messaging (like dev_dbg and pr_debug), -+ sysfs, and debugfs support in SPI controller and protocol drivers. -+ -+# -+# MASTER side ... talking to discrete SPI slave chips including microcontrollers -+# -+ -+config SPI_MASTER -+# boolean "SPI Master Support" -+ boolean -+ default SPI -+ help -+ If your system has an master-capable SPI controller (which -+ provides the clock and chipselect), you can enable that -+ controller and the protocol drivers for the SPI slave chips -+ that are connected. -+ -+if SPI_MASTER -+ -+comment "SPI Master Controller Drivers" -+ -+config SPI_ALTERA -+ tristate "Altera SPI Controller" -+ select SPI_BITBANG -+ help -+ This is the driver for the Altera SPI Controller. -+ -+config SPI_ATH79 -+ tristate "Atheros AR71XX/AR724X/AR913X SPI controller driver" -+ depends on ATH79 && GENERIC_GPIO -+ select SPI_BITBANG -+ help -+ This enables support for the SPI controller present on the -+ Atheros AR71XX/AR724X/AR913X SoCs. -+ -+config SPI_AR71XX -+ tristate "Atheros AR71xx SPI Controller" -+ depends on SPI_MASTER && ATHEROS_AR71XX -+ select SPI_BITBANG -+ help -+ This is the SPI contoller driver for Atheros AR71xx. -+ -+config SPI_ATMEL -+ tristate "Atmel SPI Controller" -+ depends on (ARCH_AT91 || AVR32) -+ help -+ This selects a driver for the Atmel SPI Controller, present on -+ many AT32 (AVR32) and AT91 (ARM) chips. -+ -+config SPI_BFIN -+ tristate "SPI controller driver for ADI Blackfin5xx" -+ depends on BLACKFIN -+ help -+ This is the SPI controller master driver for Blackfin 5xx processor. -+ -+config SPI_AU1550 -+ tristate "Au1550/Au12x0 SPI Controller" -+ depends on (SOC_AU1550 || SOC_AU1200) && EXPERIMENTAL -+ select SPI_BITBANG -+ help -+ If you say yes to this option, support will be included for the -+ Au1550 SPI controller (may also work with Au1200,Au1210,Au1250). -+ -+ This driver can also be built as a module. If so, the module -+ will be called au1550_spi. -+ -+config SPI_BITBANG -+ tristate "Utilities for Bitbanging SPI masters" -+ help -+ With a few GPIO pins, your system can bitbang the SPI protocol. -+ Select this to get SPI support through I/O pins (GPIO, parallel -+ port, etc). Or, some systems' SPI master controller drivers use -+ this code to manage the per-word or per-transfer accesses to the -+ hardware shift registers. -+ -+ This is library code, and is automatically selected by drivers that -+ need it. You only need to select this explicitly to support driver -+ modules that aren't part of this kernel tree. -+ -+config SPI_BUTTERFLY -+ tristate "Parallel port adapter for AVR Butterfly (DEVELOPMENT)" -+ depends on PARPORT -+ select SPI_BITBANG -+ help -+ This uses a custom parallel port cable to connect to an AVR -+ Butterfly <http://www.atmel.com/products/avr/butterfly>, an -+ inexpensive battery powered microcontroller evaluation board. -+ This same cable can be used to flash new firmware. -+ -+config SPI_COLDFIRE_QSPI -+ tristate "Freescale Coldfire QSPI controller" -+ depends on (M520x || M523x || M5249 || M527x || M528x || M532x) -+ help -+ This enables support for the Coldfire QSPI controller in master -+ mode. -+ -+ This driver can also be built as a module. If so, the module -+ will be called coldfire_qspi. -+ -+config SPI_DAVINCI -+ tristate "Texas Instruments DaVinci/DA8x/OMAP-L/AM1x SoC SPI controller" -+ depends on SPI_MASTER && ARCH_DAVINCI -+ select SPI_BITBANG -+ help -+ SPI master controller for DaVinci/DA8x/OMAP-L/AM1x SPI modules. -+ -+ This driver can also be built as a module. The module will be called -+ davinci_spi. -+ -+config SPI_EP93XX -+ tristate "Cirrus Logic EP93xx SPI controller" -+ depends on ARCH_EP93XX -+ help -+ This enables using the Cirrus EP93xx SPI controller in master -+ mode. -+ -+ To compile this driver as a module, choose M here. The module will be -+ called ep93xx_spi. -+ -+config SPI_GPIO -+ tristate "GPIO-based bitbanging SPI Master" -+ depends on GENERIC_GPIO -+ select SPI_BITBANG -+ help -+ This simple GPIO bitbanging SPI master uses the arch-neutral GPIO -+ interface to manage MOSI, MISO, SCK, and chipselect signals. SPI -+ slaves connected to a bus using this driver are configured as usual, -+ except that the spi_board_info.controller_data holds the GPIO number -+ for the chipselect used by this controller driver. -+ -+ Note that this driver often won't achieve even 1 Mbit/sec speeds, -+ making it unusually slow for SPI. If your platform can inline -+ GPIO operations, you should be able to leverage that for better -+ speed with a custom version of this driver; see the source code. -+ -+config SPI_IMX_VER_IMX1 -+ def_bool y if SOC_IMX1 -+ -+config SPI_IMX_VER_0_0 -+ def_bool y if SOC_IMX21 || SOC_IMX27 -+ -+config SPI_IMX_VER_0_4 -+ def_bool y if SOC_IMX31 -+ -+config SPI_IMX_VER_0_7 -+ def_bool y if ARCH_MX25 || SOC_IMX35 || SOC_IMX51 || SOC_IMX53 -+ -+config SPI_IMX_VER_2_3 -+ def_bool y if SOC_IMX51 || SOC_IMX53 -+ -+config SPI_IMX -+ tristate "Freescale i.MX SPI controllers" -+ depends on ARCH_MXC -+ select SPI_BITBANG -+ default m if IMX_HAVE_PLATFORM_SPI_IMX -+ help -+ This enables using the Freescale i.MX SPI controllers in master -+ mode. -+ -+config SPI_LM70_LLP -+ tristate "Parallel port adapter for LM70 eval board (DEVELOPMENT)" -+ depends on PARPORT && EXPERIMENTAL -+ select SPI_BITBANG -+ help -+ This driver supports the NS LM70 LLP Evaluation Board, -+ which interfaces to an LM70 temperature sensor using -+ a parallel port. -+ -+config SPI_MPC52xx -+ tristate "Freescale MPC52xx SPI (non-PSC) controller support" -+ depends on PPC_MPC52xx && SPI -+ select SPI_MASTER_OF -+ help -+ This drivers supports the MPC52xx SPI controller in master SPI -+ mode. -+ -+config SPI_MPC52xx_PSC -+ tristate "Freescale MPC52xx PSC SPI controller" -+ depends on PPC_MPC52xx && EXPERIMENTAL -+ help -+ This enables using the Freescale MPC52xx Programmable Serial -+ Controller in master SPI mode. -+ -+config SPI_MPC512x_PSC -+ tristate "Freescale MPC512x PSC SPI controller" -+ depends on SPI_MASTER && PPC_MPC512x -+ help -+ This enables using the Freescale MPC5121 Programmable Serial -+ Controller in SPI master mode. -+ -+config SPI_FSL_LIB -+ tristate -+ depends on FSL_SOC -+ -+config SPI_FSL_SPI -+ tristate "Freescale SPI controller" -+ depends on FSL_SOC -+ select SPI_FSL_LIB -+ help -+ This enables using the Freescale SPI controllers in master mode. -+ MPC83xx platform uses the controller in cpu mode or CPM/QE mode. -+ MPC8569 uses the controller in QE mode, MPC8610 in cpu mode. -+ -+config SPI_FSL_ESPI -+ tristate "Freescale eSPI controller" -+ depends on FSL_SOC -+ select SPI_FSL_LIB -+ help -+ This enables using the Freescale eSPI controllers in master mode. -+ From MPC8536, 85xx platform uses the controller, and all P10xx, -+ P20xx, P30xx,P40xx, P50xx uses this controller. -+ -+config SPI_OC_TINY -+ tristate "OpenCores tiny SPI" -+ depends on GENERIC_GPIO -+ select SPI_BITBANG -+ help -+ This is the driver for OpenCores tiny SPI master controller. -+ -+config SPI_OMAP_UWIRE -+ tristate "OMAP1 MicroWire" -+ depends on ARCH_OMAP1 -+ select SPI_BITBANG -+ help -+ This hooks up to the MicroWire controller on OMAP1 chips. -+ -+config SPI_OMAP24XX -+ tristate "McSPI driver for OMAP" -+ depends on ARCH_OMAP2PLUS -+ help -+ SPI master controller for OMAP24XX and later Multichannel SPI -+ (McSPI) modules. -+ -+config SPI_OMAP_100K -+ tristate "OMAP SPI 100K" -+ depends on SPI_MASTER && (ARCH_OMAP850 || ARCH_OMAP730) -+ help -+ OMAP SPI 100K master controller for omap7xx boards. -+ -+config SPI_ORION -+ tristate "Orion SPI master (EXPERIMENTAL)" -+ depends on PLAT_ORION && EXPERIMENTAL -+ help -+ This enables using the SPI master controller on the Orion chips. -+ -+config SPI_PL022 -+ tristate "ARM AMBA PL022 SSP controller (EXPERIMENTAL)" -+ depends on ARM_AMBA && EXPERIMENTAL -+ default y if MACH_U300 -+ default y if ARCH_REALVIEW -+ default y if INTEGRATOR_IMPD1 -+ default y if ARCH_VERSATILE -+ help -+ This selects the ARM(R) AMBA(R) PrimeCell PL022 SSP -+ controller. If you have an embedded system with an AMBA(R) -+ bus and a PL022 controller, say Y or M here. -+ -+config SPI_PPC4xx -+ tristate "PPC4xx SPI Controller" -+ depends on PPC32 && 4xx && SPI_MASTER -+ select SPI_BITBANG -+ help -+ This selects a driver for the PPC4xx SPI Controller. -+ -+config SPI_PXA2XX -+ tristate "PXA2xx SSP SPI master" -+ depends on (ARCH_PXA || (X86_32 && PCI)) && EXPERIMENTAL -+ select PXA_SSP if ARCH_PXA -+ help -+ This enables using a PXA2xx or Sodaville SSP port as a SPI master -+ controller. The driver can be configured to use any SSP port and -+ additional documentation can be found a Documentation/spi/pxa2xx. -+ -+config SPI_PXA2XX_PCI -+ def_bool SPI_PXA2XX && X86_32 && PCI -+ -+config SPI_S3C24XX -+ tristate "Samsung S3C24XX series SPI" -+ depends on ARCH_S3C2410 && EXPERIMENTAL -+ select SPI_BITBANG -+ help -+ SPI driver for Samsung S3C24XX series ARM SoCs -+ -+config SPI_S3C24XX_FIQ -+ bool "S3C24XX driver with FIQ pseudo-DMA" -+ depends on SPI_S3C24XX -+ select FIQ -+ help -+ Enable FIQ support for the S3C24XX SPI driver to provide pseudo -+ DMA by using the fast-interrupt request framework, This allows -+ the driver to get DMA-like performance when there are either -+ no free DMA channels, or when doing transfers that required both -+ TX and RX data paths. -+ -+config SPI_S3C24XX_GPIO -+ tristate "Samsung S3C24XX series SPI by GPIO" -+ depends on ARCH_S3C2410 && EXPERIMENTAL -+ select SPI_BITBANG -+ help -+ SPI driver for Samsung S3C24XX series ARM SoCs using -+ GPIO lines to provide the SPI bus. This can be used where -+ the inbuilt hardware cannot provide the transfer mode, or -+ where the board is using non hardware connected pins. -+ -+config SPI_S3C64XX -+ tristate "Samsung S3C64XX series type SPI" -+ depends on (ARCH_S3C64XX || ARCH_S5P64X0) -+ select S3C64XX_DMA if ARCH_S3C64XX -+ help -+ SPI driver for Samsung S3C64XX and newer SoCs. -+ -+config SPI_SH_MSIOF -+ tristate "SuperH MSIOF SPI controller" -+ depends on SUPERH && HAVE_CLK -+ select SPI_BITBANG -+ help -+ SPI driver for SuperH MSIOF blocks. -+ -+config SPI_SH -+ tristate "SuperH SPI controller" -+ depends on SUPERH -+ help -+ SPI driver for SuperH SPI blocks. -+ -+config SPI_SH_SCI -+ tristate "SuperH SCI SPI controller" -+ depends on SUPERH -+ select SPI_BITBANG -+ help -+ SPI driver for SuperH SCI blocks. -+ -+config SPI_STMP3XXX -+ tristate "Freescale STMP37xx/378x SPI/SSP controller" -+ depends on ARCH_STMP3XXX && SPI_MASTER -+ help -+ SPI driver for Freescale STMP37xx/378x SoC SSP interface -+ -+config SPI_TEGRA -+ tristate "Nvidia Tegra SPI controller" -+ depends on ARCH_TEGRA -+ select TEGRA_SYSTEM_DMA -+ help -+ SPI driver for NVidia Tegra SoCs -+ -+config SPI_TI_SSP -+ tristate "TI Sequencer Serial Port - SPI Support" -+ depends on MFD_TI_SSP -+ help -+ This selects an SPI master implementation using a TI sequencer -+ serial port. -+ -+ To compile this driver as a module, choose M here: the -+ module will be called ti-ssp-spi. -+ -+config SPI_TOPCLIFF_PCH -+ tristate "Topcliff PCH SPI Controller" -+ depends on PCI -+ help -+ SPI driver for the Topcliff PCH (Platform Controller Hub) SPI bus -+ used in some x86 embedded processors. -+ -+config SPI_TXX9 -+ tristate "Toshiba TXx9 SPI controller" -+ depends on GENERIC_GPIO && CPU_TX49XX -+ help -+ SPI driver for Toshiba TXx9 MIPS SoCs -+ -+config SPI_XILINX -+ tristate "Xilinx SPI controller common module" -+ depends on HAS_IOMEM && EXPERIMENTAL -+ select SPI_BITBANG -+ help -+ This exposes the SPI controller IP from the Xilinx EDK. -+ -+ See the "OPB Serial Peripheral Interface (SPI) (v1.00e)" -+ Product Specification document (DS464) for hardware details. -+ -+ Or for the DS570, see "XPS Serial Peripheral Interface (SPI) (v2.00b)" -+ -+config SPI_NUC900 -+ tristate "Nuvoton NUC900 series SPI" -+ depends on ARCH_W90X900 && EXPERIMENTAL -+ select SPI_BITBANG -+ help -+ SPI driver for Nuvoton NUC900 series ARM SoCs -+ -+# -+# Add new SPI master controllers in alphabetical order above this line -+# -+ -+config SPI_DESIGNWARE -+ tristate "DesignWare SPI controller core support" -+ depends on SPI_MASTER -+ help -+ general driver for SPI controller core from DesignWare -+ -+config SPI_DW_PCI -+ tristate "PCI interface driver for DW SPI core" -+ depends on SPI_DESIGNWARE && PCI -+ -+config SPI_DW_MID_DMA -+ bool "DMA support for DW SPI controller on Intel Moorestown platform" -+ depends on SPI_DW_PCI && INTEL_MID_DMAC -+ -+config SPI_DW_MMIO -+ tristate "Memory-mapped io interface driver for DW SPI core" -+ depends on SPI_DESIGNWARE && HAVE_CLK -+ -+# -+# There are lots of SPI device types, with sensors and memory -+# being probably the most widely used ones. -+# -+comment "SPI Protocol Masters" -+ -+config SPI_SPIDEV -+ tristate "User mode SPI device driver support" -+ depends on EXPERIMENTAL -+ help -+ This supports user mode SPI protocol drivers. -+ -+ Note that this application programming interface is EXPERIMENTAL -+ and hence SUBJECT TO CHANGE WITHOUT NOTICE while it stabilizes. -+ -+config SPI_TLE62X0 -+ tristate "Infineon TLE62X0 (for power switching)" -+ depends on SYSFS -+ help -+ SPI driver for Infineon TLE62X0 series line driver chips, -+ such as the TLE6220, TLE6230 and TLE6240. This provides a -+ sysfs interface, with each line presented as a kind of GPIO -+ exposing both switch control and diagnostic feedback. -+ -+config SPI_RB4XX_CPLD -+ tristate "MikroTik RB4XX CPLD driver" -+ depends on AR71XX_MACH_RB4XX -+ help -+ SPI driver for the Xilinx CPLD chip present on the -+ MikroTik RB4xx boards. -+ -+# -+# Add new SPI protocol masters in alphabetical order above this line -+# -+ -+endif # SPI_MASTER -+ -+# (slave support would go here) -+ -+endif # SPI -diff -Nur linux-2.6.39.orig/drivers/spi/Makefile linux-2.6.39/drivers/spi/Makefile ---- linux-2.6.39.orig/drivers/spi/Makefile 2011-05-19 06:06:34.000000000 +0200 -+++ linux-2.6.39/drivers/spi/Makefile 2011-08-23 15:10:24.199233941 +0200 -@@ -10,6 +10,7 @@ - - # SPI master controller drivers (bus) - obj-$(CONFIG_SPI_ALTERA) += spi_altera.o -+obj-$(CONFIG_SPI_AR71XX) += ar71xx_spi.o - obj-$(CONFIG_SPI_ATMEL) += atmel_spi.o - obj-$(CONFIG_SPI_ATH79) += ath79_spi.o - obj-$(CONFIG_SPI_BFIN) += spi_bfin5xx.o -@@ -54,6 +55,7 @@ - obj-$(CONFIG_SPI_SH_MSIOF) += spi_sh_msiof.o - obj-$(CONFIG_SPI_STMP3XXX) += spi_stmp.o - obj-$(CONFIG_SPI_NUC900) += spi_nuc900.o -+obj-$(CONFIG_SPI_RB4XX) += rb4xx_spi.o - - # special build for s3c24xx spi driver with fiq support - spi_s3c24xx_hw-y := spi_s3c24xx.o -@@ -62,6 +64,7 @@ - # ... add above this line ... - - # SPI protocol drivers (device/link on bus) -+obj-$(CONFIG_SPI_RB4XX_CPLD) += spi_rb4xx_cpld.o - obj-$(CONFIG_SPI_SPIDEV) += spidev.o - obj-$(CONFIG_SPI_TLE62X0) += tle62x0.o - # ... add above this line ... -diff -Nur linux-2.6.39.orig/drivers/spi/Makefile.orig linux-2.6.39/drivers/spi/Makefile.orig ---- linux-2.6.39.orig/drivers/spi/Makefile.orig 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.39/drivers/spi/Makefile.orig 2011-08-23 15:10:11.300479072 +0200 -@@ -0,0 +1,75 @@ -+# -+# Makefile for kernel SPI drivers. -+# -+ -+ccflags-$(CONFIG_SPI_DEBUG) := -DDEBUG -+ -+# small core, mostly translating board-specific -+# config declarations into driver model code -+obj-$(CONFIG_SPI_MASTER) += spi.o -+ -+# SPI master controller drivers (bus) -+obj-$(CONFIG_SPI_ALTERA) += spi_altera.o -+obj-$(CONFIG_SPI_AR71XX) += ar71xx_spi.o -+obj-$(CONFIG_SPI_ATMEL) += atmel_spi.o -+obj-$(CONFIG_SPI_ATH79) += ath79_spi.o -+obj-$(CONFIG_SPI_BFIN) += spi_bfin5xx.o -+obj-$(CONFIG_SPI_BITBANG) += spi_bitbang.o -+obj-$(CONFIG_SPI_AU1550) += au1550_spi.o -+obj-$(CONFIG_SPI_BUTTERFLY) += spi_butterfly.o -+obj-$(CONFIG_SPI_COLDFIRE_QSPI) += coldfire_qspi.o -+obj-$(CONFIG_SPI_DAVINCI) += davinci_spi.o -+obj-$(CONFIG_SPI_DESIGNWARE) += dw_spi.o -+obj-$(CONFIG_SPI_DW_PCI) += dw_spi_midpci.o -+dw_spi_midpci-objs := dw_spi_pci.o dw_spi_mid.o -+obj-$(CONFIG_SPI_DW_MMIO) += dw_spi_mmio.o -+obj-$(CONFIG_SPI_EP93XX) += ep93xx_spi.o -+obj-$(CONFIG_SPI_GPIO) += spi_gpio.o -+obj-$(CONFIG_SPI_IMX) += spi_imx.o -+obj-$(CONFIG_SPI_LM70_LLP) += spi_lm70llp.o -+obj-$(CONFIG_SPI_PXA2XX) += pxa2xx_spi.o -+obj-$(CONFIG_SPI_PXA2XX_PCI) += pxa2xx_spi_pci.o -+obj-$(CONFIG_SPI_OC_TINY) += spi_oc_tiny.o -+obj-$(CONFIG_SPI_OMAP_UWIRE) += omap_uwire.o -+obj-$(CONFIG_SPI_OMAP24XX) += omap2_mcspi.o -+obj-$(CONFIG_SPI_OMAP_100K) += omap_spi_100k.o -+obj-$(CONFIG_SPI_ORION) += orion_spi.o -+obj-$(CONFIG_SPI_PL022) += amba-pl022.o -+obj-$(CONFIG_SPI_MPC512x_PSC) += mpc512x_psc_spi.o -+obj-$(CONFIG_SPI_MPC52xx_PSC) += mpc52xx_psc_spi.o -+obj-$(CONFIG_SPI_MPC52xx) += mpc52xx_spi.o -+obj-$(CONFIG_SPI_FSL_LIB) += spi_fsl_lib.o -+obj-$(CONFIG_SPI_FSL_ESPI) += spi_fsl_espi.o -+obj-$(CONFIG_SPI_FSL_SPI) += spi_fsl_spi.o -+obj-$(CONFIG_SPI_PPC4xx) += spi_ppc4xx.o -+obj-$(CONFIG_SPI_S3C24XX_GPIO) += spi_s3c24xx_gpio.o -+obj-$(CONFIG_SPI_S3C24XX) += spi_s3c24xx_hw.o -+obj-$(CONFIG_SPI_S3C64XX) += spi_s3c64xx.o -+obj-$(CONFIG_SPI_TEGRA) += spi_tegra.o -+obj-$(CONFIG_SPI_TI_SSP) += ti-ssp-spi.o -+obj-$(CONFIG_SPI_TOPCLIFF_PCH) += spi_topcliff_pch.o -+obj-$(CONFIG_SPI_TXX9) += spi_txx9.o -+obj-$(CONFIG_SPI_XILINX) += xilinx_spi.o -+obj-$(CONFIG_SPI_SH) += spi_sh.o -+obj-$(CONFIG_SPI_SH_SCI) += spi_sh_sci.o -+obj-$(CONFIG_SPI_SH_MSIOF) += spi_sh_msiof.o -+obj-$(CONFIG_SPI_STMP3XXX) += spi_stmp.o -+obj-$(CONFIG_SPI_NUC900) += spi_nuc900.o -+ -+# special build for s3c24xx spi driver with fiq support -+spi_s3c24xx_hw-y := spi_s3c24xx.o -+spi_s3c24xx_hw-$(CONFIG_SPI_S3C24XX_FIQ) += spi_s3c24xx_fiq.o -+ -+# ... add above this line ... -+ -+# SPI protocol drivers (device/link on bus) -+obj-$(CONFIG_SPI_RB4XX_CPLD) += spi_rb4xx_cpld.o -+obj-$(CONFIG_SPI_SPIDEV) += spidev.o -+obj-$(CONFIG_SPI_TLE62X0) += tle62x0.o -+# ... add above this line ... -+ -+# SPI slave controller drivers (upstream link) -+# ... add above this line ... -+ -+# SPI slave drivers (protocol for that link) -+# ... add above this line ... diff -Nur linux-2.6.39.orig/drivers/spi/pb44_spi.c linux-2.6.39/drivers/spi/pb44_spi.c --- linux-2.6.39.orig/drivers/spi/pb44_spi.c 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.39/drivers/spi/pb44_spi.c 2011-04-27 12:19:22.317665385 +0200 ++++ linux-2.6.39/drivers/spi/pb44_spi.c 2011-08-24 18:17:24.000000000 +0200 @@ -0,0 +1,299 @@ +/* + * Atheros PB44 board SPI controller driver @@ -24415,7 +21374,7 @@ diff -Nur linux-2.6.39.orig/drivers/spi/pb44_spi.c linux-2.6.39/drivers/spi/pb44 +MODULE_LICENSE("GPL v2"); diff -Nur linux-2.6.39.orig/drivers/spi/rb4xx_spi.c linux-2.6.39/drivers/spi/rb4xx_spi.c --- linux-2.6.39.orig/drivers/spi/rb4xx_spi.c 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.39/drivers/spi/rb4xx_spi.c 2011-04-27 12:19:22.307664943 +0200 ++++ linux-2.6.39/drivers/spi/rb4xx_spi.c 2011-08-24 18:17:24.000000000 +0200 @@ -0,0 +1,474 @@ +/* + * SPI controller driver for the Mikrotik RB4xx boards @@ -24893,7 +21852,7 @@ diff -Nur linux-2.6.39.orig/drivers/spi/rb4xx_spi.c linux-2.6.39/drivers/spi/rb4 +MODULE_LICENSE("GPL v2"); diff -Nur linux-2.6.39.orig/drivers/spi/spi_rb4xx_cpld.c linux-2.6.39/drivers/spi/spi_rb4xx_cpld.c --- linux-2.6.39.orig/drivers/spi/spi_rb4xx_cpld.c 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.39/drivers/spi/spi_rb4xx_cpld.c 2011-04-27 12:19:22.317665385 +0200 ++++ linux-2.6.39/drivers/spi/spi_rb4xx_cpld.c 2011-08-24 18:17:24.000000000 +0200 @@ -0,0 +1,440 @@ +/* + * SPI driver for the CPLD chip on the Mikrotik RB4xx boards @@ -25337,7 +22296,7 @@ diff -Nur linux-2.6.39.orig/drivers/spi/spi_rb4xx_cpld.c linux-2.6.39/drivers/sp +MODULE_LICENSE("GPL v2"); diff -Nur linux-2.6.39.orig/drivers/spi/spi_vsc7385.c linux-2.6.39/drivers/spi/spi_vsc7385.c --- linux-2.6.39.orig/drivers/spi/spi_vsc7385.c 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.39/drivers/spi/spi_vsc7385.c 2011-04-27 12:19:22.317665385 +0200 ++++ linux-2.6.39/drivers/spi/spi_vsc7385.c 2011-08-24 18:17:24.000000000 +0200 @@ -0,0 +1,621 @@ +/* + * SPI driver for the Vitesse VSC7385 ethernet switch @@ -25962,7 +22921,7 @@ diff -Nur linux-2.6.39.orig/drivers/spi/spi_vsc7385.c linux-2.6.39/drivers/spi/s + diff -Nur linux-2.6.39.orig/drivers/tty/serial/ar933x_uart.c linux-2.6.39/drivers/tty/serial/ar933x_uart.c --- linux-2.6.39.orig/drivers/tty/serial/ar933x_uart.c 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.39/drivers/tty/serial/ar933x_uart.c 2011-08-06 09:32:37.098016752 +0200 ++++ linux-2.6.39/drivers/tty/serial/ar933x_uart.c 2011-08-24 18:17:24.000000000 +0200 @@ -0,0 +1,688 @@ +/* + * Atheros AR933X SoC built-in UART driver @@ -26652,9 +23611,40 @@ diff -Nur linux-2.6.39.orig/drivers/tty/serial/ar933x_uart.c linux-2.6.39/driver +MODULE_AUTHOR("Gabor Juhos <juhosg@openwrt.org>"); +MODULE_LICENSE("GPL v2"); +MODULE_ALIAS("platform:" DRIVER_NAME); +diff -Nur linux-2.6.39.orig/drivers/usb/host/Kconfig linux-2.6.39/drivers/usb/host/Kconfig +--- linux-2.6.39.orig/drivers/usb/host/Kconfig 2011-05-19 06:06:34.000000000 +0200 ++++ linux-2.6.39/drivers/usb/host/Kconfig 2011-08-24 18:17:24.000000000 +0200 +@@ -129,6 +129,13 @@ + config USB_FSL_MPH_DR_OF + tristate + ++config USB_EHCI_AR71XX ++ bool "USB EHCI support for AR71xx" ++ depends on USB_EHCI_HCD && ATHEROS_AR71XX ++ default y ++ help ++ Support for Atheros AR71xx built-in EHCI controller ++ + config USB_EHCI_FSL + bool "Support for Freescale on-chip EHCI USB controller" + depends on USB_EHCI_HCD && FSL_SOC +@@ -287,6 +294,13 @@ + Enables support for the on-chip OHCI controller on + OMAP3 and later chips. + ++config USB_OHCI_AR71XX ++ bool "USB OHCI support for Atheros AR71xx" ++ depends on USB_OHCI_HCD && ATHEROS_AR71XX ++ default y ++ help ++ Support for Atheros AR71xx built-in OHCI controller ++ + config USB_OHCI_HCD_PPC_SOC + bool "OHCI support for on-chip PPC USB controller" + depends on USB_OHCI_HCD && (STB03xxx || PPC_MPC52xx) diff -Nur linux-2.6.39.orig/drivers/usb/host/ehci-ar71xx.c linux-2.6.39/drivers/usb/host/ehci-ar71xx.c --- linux-2.6.39.orig/drivers/usb/host/ehci-ar71xx.c 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.39/drivers/usb/host/ehci-ar71xx.c 2011-04-27 12:19:22.267661616 +0200 ++++ linux-2.6.39/drivers/usb/host/ehci-ar71xx.c 2011-08-24 18:17:24.000000000 +0200 @@ -0,0 +1,242 @@ +/* + * Bus Glue for Atheros AR71xx built-in EHCI controller. @@ -26900,7 +23890,7 @@ diff -Nur linux-2.6.39.orig/drivers/usb/host/ehci-ar71xx.c linux-2.6.39/drivers/ +}; diff -Nur linux-2.6.39.orig/drivers/usb/host/ehci-hcd.c linux-2.6.39/drivers/usb/host/ehci-hcd.c --- linux-2.6.39.orig/drivers/usb/host/ehci-hcd.c 2011-05-19 06:06:34.000000000 +0200 -+++ linux-2.6.39/drivers/usb/host/ehci-hcd.c 2011-08-22 16:21:42.807985568 +0200 ++++ linux-2.6.39/drivers/usb/host/ehci-hcd.c 2011-08-24 18:17:24.000000000 +0200 @@ -1265,6 +1265,11 @@ #define PLATFORM_DRIVER tegra_ehci_driver #endif @@ -26913,40 +23903,9 @@ diff -Nur linux-2.6.39.orig/drivers/usb/host/ehci-hcd.c linux-2.6.39/drivers/usb #if !defined(PCI_DRIVER) && !defined(PLATFORM_DRIVER) && \ !defined(PS3_SYSTEM_BUS_DRIVER) && !defined(OF_PLATFORM_DRIVER) && \ !defined(XILINX_OF_PLATFORM_DRIVER) -diff -Nur linux-2.6.39.orig/drivers/usb/host/Kconfig linux-2.6.39/drivers/usb/host/Kconfig ---- linux-2.6.39.orig/drivers/usb/host/Kconfig 2011-05-19 06:06:34.000000000 +0200 -+++ linux-2.6.39/drivers/usb/host/Kconfig 2011-08-22 16:21:42.767983341 +0200 -@@ -129,6 +129,13 @@ - config USB_FSL_MPH_DR_OF - tristate - -+config USB_EHCI_AR71XX -+ bool "USB EHCI support for AR71xx" -+ depends on USB_EHCI_HCD && ATHEROS_AR71XX -+ default y -+ help -+ Support for Atheros AR71xx built-in EHCI controller -+ - config USB_EHCI_FSL - bool "Support for Freescale on-chip EHCI USB controller" - depends on USB_EHCI_HCD && FSL_SOC -@@ -287,6 +294,13 @@ - Enables support for the on-chip OHCI controller on - OMAP3 and later chips. - -+config USB_OHCI_AR71XX -+ bool "USB OHCI support for Atheros AR71xx" -+ depends on USB_OHCI_HCD && ATHEROS_AR71XX -+ default y -+ help -+ Support for Atheros AR71xx built-in OHCI controller -+ - config USB_OHCI_HCD_PPC_SOC - bool "OHCI support for on-chip PPC USB controller" - depends on USB_OHCI_HCD && (STB03xxx || PPC_MPC52xx) diff -Nur linux-2.6.39.orig/drivers/usb/host/ohci-ar71xx.c linux-2.6.39/drivers/usb/host/ohci-ar71xx.c --- linux-2.6.39.orig/drivers/usb/host/ohci-ar71xx.c 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.39/drivers/usb/host/ohci-ar71xx.c 2011-04-27 12:19:22.267661616 +0200 ++++ linux-2.6.39/drivers/usb/host/ohci-ar71xx.c 2011-08-24 18:17:24.000000000 +0200 @@ -0,0 +1,165 @@ +/* + * OHCI HCD (Host Controller Driver) for USB. @@ -27115,7 +24074,7 @@ diff -Nur linux-2.6.39.orig/drivers/usb/host/ohci-ar71xx.c linux-2.6.39/drivers/ +}; diff -Nur linux-2.6.39.orig/drivers/usb/host/ohci-hcd.c linux-2.6.39/drivers/usb/host/ohci-hcd.c --- linux-2.6.39.orig/drivers/usb/host/ohci-hcd.c 2011-05-19 06:06:34.000000000 +0200 -+++ linux-2.6.39/drivers/usb/host/ohci-hcd.c 2011-08-22 16:21:42.847983209 +0200 ++++ linux-2.6.39/drivers/usb/host/ohci-hcd.c 2011-08-24 18:17:24.000000000 +0200 @@ -1105,6 +1105,11 @@ #define PLATFORM_DRIVER ohci_hcd_cns3xxx_driver #endif @@ -27128,9 +24087,37 @@ diff -Nur linux-2.6.39.orig/drivers/usb/host/ohci-hcd.c linux-2.6.39/drivers/usb #if !defined(PCI_DRIVER) && \ !defined(PLATFORM_DRIVER) && \ !defined(OMAP1_PLATFORM_DRIVER) && \ +diff -Nur linux-2.6.39.orig/drivers/watchdog/Kconfig linux-2.6.39/drivers/watchdog/Kconfig +--- linux-2.6.39.orig/drivers/watchdog/Kconfig 2011-05-19 06:06:34.000000000 +0200 ++++ linux-2.6.39/drivers/watchdog/Kconfig 2011-08-24 18:17:24.000000000 +0200 +@@ -990,6 +990,13 @@ + To compile this driver as a loadable module, choose M here. + The module will be called bcm63xx_wdt. + ++config AR71XX_WDT ++ tristate "Atheros AR71xx Watchdog Timer" ++ depends on ATHEROS_AR71XX ++ help ++ Hardware driver for the built-in watchdog timer on the Atheros ++ AR71xx SoCs. ++ + # PARISC Architecture + + # POWERPC Architecture +diff -Nur linux-2.6.39.orig/drivers/watchdog/Makefile linux-2.6.39/drivers/watchdog/Makefile +--- linux-2.6.39.orig/drivers/watchdog/Makefile 2011-05-19 06:06:34.000000000 +0200 ++++ linux-2.6.39/drivers/watchdog/Makefile 2011-08-24 18:17:24.000000000 +0200 +@@ -119,6 +119,7 @@ + obj-$(CONFIG_WDT_MTX1) += mtx-1_wdt.o + obj-$(CONFIG_PNX833X_WDT) += pnx833x_wdt.o + obj-$(CONFIG_SIBYTE_WDOG) += sb_wdog.o ++obj-$(CONFIG_AR71XX_WDT) += ar71xx_wdt.o + obj-$(CONFIG_AR7_WDT) += ar7_wdt.o + obj-$(CONFIG_TXX9_WDT) += txx9wdt.o + obj-$(CONFIG_OCTEON_WDT) += octeon-wdt.o diff -Nur linux-2.6.39.orig/drivers/watchdog/ar71xx_wdt.c linux-2.6.39/drivers/watchdog/ar71xx_wdt.c --- linux-2.6.39.orig/drivers/watchdog/ar71xx_wdt.c 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.39/drivers/watchdog/ar71xx_wdt.c 2011-08-06 09:32:37.118022037 +0200 ++++ linux-2.6.39/drivers/watchdog/ar71xx_wdt.c 2011-08-24 18:17:24.000000000 +0200 @@ -0,0 +1,299 @@ +/* + * Driver for the Atheros AR71xx SoC's built-in hardware watchdog timer. @@ -27431,37 +24418,9 @@ diff -Nur linux-2.6.39.orig/drivers/watchdog/ar71xx_wdt.c linux-2.6.39/drivers/w +MODULE_LICENSE("GPL v2"); +MODULE_ALIAS("platform:" DRV_NAME); +MODULE_ALIAS_MISCDEV(WATCHDOG_MINOR); -diff -Nur linux-2.6.39.orig/drivers/watchdog/Kconfig linux-2.6.39/drivers/watchdog/Kconfig ---- linux-2.6.39.orig/drivers/watchdog/Kconfig 2011-05-19 06:06:34.000000000 +0200 -+++ linux-2.6.39/drivers/watchdog/Kconfig 2011-08-22 16:22:00.627980889 +0200 -@@ -990,6 +990,13 @@ - To compile this driver as a loadable module, choose M here. - The module will be called bcm63xx_wdt. - -+config AR71XX_WDT -+ tristate "Atheros AR71xx Watchdog Timer" -+ depends on ATHEROS_AR71XX -+ help -+ Hardware driver for the built-in watchdog timer on the Atheros -+ AR71xx SoCs. -+ - # PARISC Architecture - - # POWERPC Architecture -diff -Nur linux-2.6.39.orig/drivers/watchdog/Makefile linux-2.6.39/drivers/watchdog/Makefile ---- linux-2.6.39.orig/drivers/watchdog/Makefile 2011-05-19 06:06:34.000000000 +0200 -+++ linux-2.6.39/drivers/watchdog/Makefile 2011-08-22 16:22:00.647986892 +0200 -@@ -119,6 +119,7 @@ - obj-$(CONFIG_WDT_MTX1) += mtx-1_wdt.o - obj-$(CONFIG_PNX833X_WDT) += pnx833x_wdt.o - obj-$(CONFIG_SIBYTE_WDOG) += sb_wdog.o -+obj-$(CONFIG_AR71XX_WDT) += ar71xx_wdt.o - obj-$(CONFIG_AR7_WDT) += ar7_wdt.o - obj-$(CONFIG_TXX9_WDT) += txx9wdt.o - obj-$(CONFIG_OCTEON_WDT) += octeon-wdt.o diff -Nur linux-2.6.39.orig/include/linux/ath9k_platform.h linux-2.6.39/include/linux/ath9k_platform.h --- linux-2.6.39.orig/include/linux/ath9k_platform.h 2011-05-19 06:06:34.000000000 +0200 -+++ linux-2.6.39/include/linux/ath9k_platform.h 2011-08-06 09:32:36.638021723 +0200 ++++ linux-2.6.39/include/linux/ath9k_platform.h 2011-08-24 18:17:24.000000000 +0200 @@ -23,6 +23,15 @@ struct ath9k_platform_data { @@ -27480,7 +24439,7 @@ diff -Nur linux-2.6.39.orig/include/linux/ath9k_platform.h linux-2.6.39/include/ #endif /* _LINUX_ATH9K_PLATFORM_H */ diff -Nur linux-2.6.39.orig/include/linux/ip.h linux-2.6.39/include/linux/ip.h --- linux-2.6.39.orig/include/linux/ip.h 2011-05-19 06:06:34.000000000 +0200 -+++ linux-2.6.39/include/linux/ip.h 2011-08-24 05:53:21.239229027 +0200 ++++ linux-2.6.39/include/linux/ip.h 2011-08-24 18:17:24.000000000 +0200 @@ -102,7 +102,7 @@ __be32 saddr; __be32 daddr; @@ -27492,7 +24451,7 @@ diff -Nur linux-2.6.39.orig/include/linux/ip.h linux-2.6.39/include/linux/ip.h #include <linux/skbuff.h> diff -Nur linux-2.6.39.orig/include/linux/ipv6.h linux-2.6.39/include/linux/ipv6.h --- linux-2.6.39.orig/include/linux/ipv6.h 2011-05-19 06:06:34.000000000 +0200 -+++ linux-2.6.39/include/linux/ipv6.h 2011-08-24 05:53:21.289229059 +0200 ++++ linux-2.6.39/include/linux/ipv6.h 2011-08-24 18:17:24.000000000 +0200 @@ -126,7 +126,7 @@ struct in6_addr saddr; @@ -27504,7 +24463,7 @@ diff -Nur linux-2.6.39.orig/include/linux/ipv6.h linux-2.6.39/include/linux/ipv6 /* diff -Nur linux-2.6.39.orig/include/linux/myloader.h linux-2.6.39/include/linux/myloader.h --- linux-2.6.39.orig/include/linux/myloader.h 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.39/include/linux/myloader.h 2011-08-24 03:12:08.307985040 +0200 ++++ linux-2.6.39/include/linux/myloader.h 2011-08-24 18:17:24.000000000 +0200 @@ -0,0 +1,120 @@ +/* + * Compex's MyLoader specific definitions @@ -27628,7 +24587,7 @@ diff -Nur linux-2.6.39.orig/include/linux/myloader.h linux-2.6.39/include/linux/ +#endif /* _MYLOADER_H_*/ diff -Nur linux-2.6.39.orig/include/linux/netdevice.h linux-2.6.39/include/linux/netdevice.h --- linux-2.6.39.orig/include/linux/netdevice.h 2011-05-19 06:06:34.000000000 +0200 -+++ linux-2.6.39/include/linux/netdevice.h 2011-08-22 22:00:06.937981400 +0200 ++++ linux-2.6.39/include/linux/netdevice.h 2011-08-24 18:17:24.000000000 +0200 @@ -1182,6 +1182,7 @@ void *ax25_ptr; /* AX.25 specific data */ struct wireless_dev *ieee80211_ptr; /* IEEE 802.11 specific data, @@ -27639,7 +24598,7 @@ diff -Nur linux-2.6.39.orig/include/linux/netdevice.h linux-2.6.39/include/linux * Cache lines mostly used on receive path (including eth_type_trans()) diff -Nur linux-2.6.39.orig/include/linux/nxp_74hc153.h linux-2.6.39/include/linux/nxp_74hc153.h --- linux-2.6.39.orig/include/linux/nxp_74hc153.h 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.39/include/linux/nxp_74hc153.h 2011-04-27 12:19:21.817661653 +0200 ++++ linux-2.6.39/include/linux/nxp_74hc153.h 2011-08-24 18:17:24.000000000 +0200 @@ -0,0 +1,24 @@ +/* + * NXP 74HC153 - Dual 4-input multiplexer defines @@ -27667,7 +24626,7 @@ diff -Nur linux-2.6.39.orig/include/linux/nxp_74hc153.h linux-2.6.39/include/lin +#endif /* _NXP_74HC153_H */ diff -Nur linux-2.6.39.orig/include/linux/phy.h linux-2.6.39/include/linux/phy.h --- linux-2.6.39.orig/include/linux/phy.h 2011-05-19 06:06:34.000000000 +0200 -+++ linux-2.6.39/include/linux/phy.h 2011-08-22 22:00:06.867980866 +0200 ++++ linux-2.6.39/include/linux/phy.h 2011-08-24 18:17:24.000000000 +0200 @@ -332,6 +332,20 @@ void (*adjust_link)(struct net_device *dev); @@ -27699,7 +24658,7 @@ diff -Nur linux-2.6.39.orig/include/linux/phy.h linux-2.6.39/include/linux/phy.h int phy_start_interrupts(struct phy_device *phydev); diff -Nur linux-2.6.39.orig/include/linux/spi/spi.h linux-2.6.39/include/linux/spi/spi.h --- linux-2.6.39.orig/include/linux/spi/spi.h 2011-05-19 06:06:34.000000000 +0200 -+++ linux-2.6.39/include/linux/spi/spi.h 2011-08-23 15:10:37.559229523 +0200 ++++ linux-2.6.39/include/linux/spi/spi.h 2011-08-24 18:17:24.000000000 +0200 @@ -441,6 +441,8 @@ dma_addr_t rx_dma; @@ -27719,7 +24678,7 @@ diff -Nur linux-2.6.39.orig/include/linux/spi/spi.h linux-2.6.39/include/linux/s * last transfer ... allowing things like "read 16 bit length L" diff -Nur linux-2.6.39.orig/include/linux/spi/vsc7385.h linux-2.6.39/include/linux/spi/vsc7385.h --- linux-2.6.39.orig/include/linux/spi/vsc7385.h 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.39/include/linux/spi/vsc7385.h 2011-04-27 12:19:21.817661653 +0200 ++++ linux-2.6.39/include/linux/spi/vsc7385.h 2011-08-24 18:17:24.000000000 +0200 @@ -0,0 +1,19 @@ +/* + * Platform data definition for the Vitesse VSC7385 ethernet switch driver @@ -27742,7 +24701,7 @@ diff -Nur linux-2.6.39.orig/include/linux/spi/vsc7385.h linux-2.6.39/include/lin +}; diff -Nur linux-2.6.39.orig/include/linux/switch.h linux-2.6.39/include/linux/switch.h --- linux-2.6.39.orig/include/linux/switch.h 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.39/include/linux/switch.h 2011-08-22 22:09:59.799231408 +0200 ++++ linux-2.6.39/include/linux/switch.h 2011-08-24 18:17:24.000000000 +0200 @@ -0,0 +1,204 @@ +/* + * switch.h: Switch configuration API @@ -27950,7 +24909,7 @@ diff -Nur linux-2.6.39.orig/include/linux/switch.h linux-2.6.39/include/linux/sw +#endif diff -Nur linux-2.6.39.orig/include/linux/tcp.h linux-2.6.39/include/linux/tcp.h --- linux-2.6.39.orig/include/linux/tcp.h 2011-05-19 06:06:34.000000000 +0200 -+++ linux-2.6.39/include/linux/tcp.h 2011-08-24 05:53:21.379228748 +0200 ++++ linux-2.6.39/include/linux/tcp.h 2011-08-24 18:17:24.000000000 +0200 @@ -54,7 +54,7 @@ __be16 window; __sum16 check; @@ -27962,7 +24921,7 @@ diff -Nur linux-2.6.39.orig/include/linux/tcp.h linux-2.6.39/include/linux/tcp.h * The union cast uses a gcc extension to avoid aliasing problems diff -Nur linux-2.6.39.orig/include/linux/udp.h linux-2.6.39/include/linux/udp.h --- linux-2.6.39.orig/include/linux/udp.h 2011-05-19 06:06:34.000000000 +0200 -+++ linux-2.6.39/include/linux/udp.h 2011-08-24 05:53:21.428824967 +0200 ++++ linux-2.6.39/include/linux/udp.h 2011-08-24 18:17:24.000000000 +0200 @@ -24,7 +24,7 @@ __be16 dest; __be16 len; @@ -27974,7 +24933,7 @@ diff -Nur linux-2.6.39.orig/include/linux/udp.h linux-2.6.39/include/linux/udp.h #define UDP_CORK 1 /* Never send partially complete segments */ diff -Nur linux-2.6.39.orig/net/dsa/mv88e6063.c linux-2.6.39/net/dsa/mv88e6063.c --- linux-2.6.39.orig/net/dsa/mv88e6063.c 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.39/net/dsa/mv88e6063.c 2011-04-27 12:19:21.827661792 +0200 ++++ linux-2.6.39/net/dsa/mv88e6063.c 2011-08-24 18:17:24.000000000 +0200 @@ -0,0 +1,294 @@ +/* + * net/dsa/mv88e6063.c - Driver for Marvell 88e6063 switch chips @@ -28272,7 +25231,7 @@ diff -Nur linux-2.6.39.orig/net/dsa/mv88e6063.c linux-2.6.39/net/dsa/mv88e6063.c +module_exit(mv88e6063_cleanup); diff -Nur linux-2.6.39.orig/net/ipv4/netfilter/nf_conntrack_l3proto_ipv4.c linux-2.6.39/net/ipv4/netfilter/nf_conntrack_l3proto_ipv4.c --- linux-2.6.39.orig/net/ipv4/netfilter/nf_conntrack_l3proto_ipv4.c 2011-05-19 06:06:34.000000000 +0200 -+++ linux-2.6.39/net/ipv4/netfilter/nf_conntrack_l3proto_ipv4.c 2011-08-24 05:53:21.549229118 +0200 ++++ linux-2.6.39/net/ipv4/netfilter/nf_conntrack_l3proto_ipv4.c 2011-08-24 18:17:24.000000000 +0200 @@ -14,6 +14,7 @@ #include <linux/skbuff.h> #include <linux/icmp.h> |